Showing papers in "ACS Applied Materials & Interfaces in 2020"

Flexible, Robust, and Multifunctional Electromagnetic Interference Shielding Film with Alternating Cellulose Nanofiber and MXene Layers.

Abstract: Flexible, lightweight, robust, and multifunctional characteristics are greatly desirable for next-generation wearable electromagnetic interference (EMI) shielding materials. In this work, an alternating multilayered structure with robust polymer frame layers and directly contacted conducting layers was designed to prepare high-performance EMI films. Especially, the multilayered films containing alternating cellulose nanofiber (CNF) layers and MXene layers are fabricated via a facile and efficient alternating vacuum filtration approach. Deriving from the mechanical frame effect acted by CNF layers in, which is capable of preventing the nanosized "zigzag" crack in MXene layers from growing to the whole film, the alternating multilayered film (CNF@MXene) revealed the improved mechanical strength (112.5 MPa) and toughness (2.7 MJ m-3) compared to both freestanding MXene film and homogeneous CNF/MXene film. Meanwhile, the directly contacted MXene layers resulted in the increased electrical conductivity from 2 (homogeneous CNF/MXene film) to 621-82 S m-1 (CNF@MXene films). In conjunction with the extra "reflection-absorption-zigzag reflection" mechanism among the alternating multilayers, CNF@MXene films demonstrated an exceptional EMI shielding effectiveness of ∼40 dB in the X-band and K-band and high specific shielding effectiveness up to 7029 dB cm2 g-1 at a thickness of only 0.035 mm. Besides, the excellent mechanical flexibility ensured the stable EMI shielding and electrical properties, which can withstand the folding test more than 1000 times without obvious reduction. Moreover, the excellent electrical conductivity endows the alternating multilayered film with an outstanding and steady Joule heating performance, which could reach more than 100 °C at only 6 V impressed voltage to within 10 s. As a result, our alternating multilayered film with reinforced EMI shielding and Joule heating performance is promising in the next-generation intelligent protection devices applying in cold and complex practical environments.

Stretchable, Biocompatible, and Multifunctional Silk Fibroin-Based Hydrogels toward Wearable Strain/Pressure Sensors and Triboelectric Nanogenerators.

Abstract: Nowadays, great effort has been devoted to establishing wearable electronics with excellent stretchability, high sensitivity, good mechanical strength, and multifunctional characteristics. Herein, a soft conductive hydrogel is rationally designed by proportionally mixing silk fibroin, polyacrylamide, graphene oxide, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate). The resultant hydrogel has considerable stretchability and compressibility, which enables it to be assembled into a strain/pressure sensor with a wide sensing range (strain, 2%-600%; pressure, 0.5-119.4 kPa) and reliable stability. Then, the corresponding sensor is capable of monitoring a series of physical signals of the human body (e.g., joint movement, facial gesture, pulse, breathing, etc.). In particular, the hydrogel-based sensor is biocompatible, with no anaphylactic reaction on human skin. More interestingly, this conductive hydrogel exhibits a positive response when it works in a triboelectric nanogenerator; consequently, it lights up 20 commericial green light-emitting diodes. Thus, this silk fibroin-based hydrogel is a kind of multifunctional material toward wearable electronics with versatile applications in health and exercise monitors, soft robots, and power sources.

Novel Functionalized BN Nanosheets/Epoxy Composites with Advanced Thermal Conductivity and Mechanical Properties.

Abstract: The effective dissipation of heat is critical to the performance and longevity of high-power electronics, so it is important to prepare highly thermally conductive polymer-based packaging materials for efficient thermal management. Due to the excellent thermal conductivity of boron nitride nanosheets (BNNSs), the hexagonal boron nitride (hBN) powder was dissolved in a mixed solution of isopropanol and deionized water for ultrasonic exfoliation to obtain hydroxylated BN nanosheets. Then, the prepared BNNS was functionalized with (3-aminopropyl)triethoxysilane (APTES) to enhance its dispersibility and interfacial compatibility in the epoxy resin, which play an important role in the improvement of the thermal conductivity of the composites. Finally, APTES-BNNS was uniformly dispersed in the epoxy resin by solvent mixing, and the oriented APTES-BNNS/epoxy composites were prepared through spin-coating and hot-pressing methods. It was found that APTES-BNNS/epoxy composites prepared herein exhibited significant anisotropic thermal conductivity. The results show that the thermal conductivity of APTES-BNNS/epoxy composites reached 5.86 W/mK at a filler content of 40 wt % and these composites have favorable thermal stability and mechanical properties. The APTES-BNNS/epoxy composite prepared in this paper has excellent thermal management capability and can be applied to the packaging of high-power electronic devices.

Paper-Based Sensors for Gas, Humidity, and Strain Detections: A Review.

Abstract: Paper, as a flexible, low-cost, lightweight, tailorable, environmental-friendly, degradable, and renewable material, is emerging in electronic devices Especially, many kinds of paper-based (PB) sensors have been reported for wearable applications in recent years Among them, the PB gas, humidity, and strain sensors are widely studied for monitoring gas, humidity, and strain from the human body and the environment However, gas, humidity, and strain often coexist and interact, and the paper itself is hydrophilic and flexible, resulting in that it is still challenging to develop high-performance PB sensors specialized for gas, humidity, and strain detections Therefore, it is necessary to summarize and discuss them systematically In this review, we focus on summarizing the state-of-art studies of the PB gas, humidity, and strain sensors Specifically, the fabrications (electrodes and sensing materials) and applications of PB gas, humidity, and strain sensors are summarized and discussed The current challenges and the potential trends of PB sensors for gas, humidity, and strain detections are also outlined This review not only can help readers to understand the development status of the PB gas, humidity, and strain sensors but also is helpful for readers to find out and solve the problems in this field through comparative reading

Graphene and Rice-Straw-Fiber-Based 3D Photothermal Aerogels for Highly Efficient Solar Evaporation.

Abstract: Solar-steam generation is one of the most promising technologies to mitigate the issue of clean water shortage using sustainable solar energy. Photothermal aerogels, especially the three-dimensional (3D) graphene-based aerogels, have shown unique merits for solar-steam generation, such as lightweight, high flexibility, and superior evaporation rate and energy efficiency. However, 3D aerogels require much more raw materials of graphene, which limits their large-scale applications. In this study, 3D photothermal aerogels composed of reduced graphene oxide (RGO) nanosheets, rice-straw-derived cellulose fibers, and sodium alginate (SA) are prepared for solar-steam generation. The use of rice straw fibers as skeletal support significantly reduces the need for the more expensive RGO by 43.5%, turning the rice straw biomass waste into value-added materials. The integration of rice straw fibers and RGO significantly enhances the flexibility and mechanical stability of the obtained photothermal RGO-SA-cellulose aerogel. The photothermal aerogel shows a strong broad-band light absorption of 96-97%. During solar-steam generation, the 3D photothermal aerogel effectively decreases the radiation and convection energy loss while enhancing energy harvesting from the environment, leading to an extremely high evaporation rate of 2.25 kg m-2 h-1, corresponding to an energy conversion efficiency of 88.9% under 1.0 sun irradiation. The salinity of clean water collected during the evaporation of real seawater is only 0.37 ppm. The materials are environmentally friendly and cost-effective, showing great potential for real-world desalination applications.

Multifunctional Flexible Electromagnetic Interference Shielding Silver Nanowires/Cellulose Films with Excellent Thermal Management and Joule Heating Performances.

Abstract: Flexible electromagnetic interference (EMI) shielding materials with excellent thermal conductivities and Joule heating performances are of urgent demand in the communication industry, artificial intelligence, and wearable electronics. In this work, highly conductive silver nanowires (AgNWs) were prepared using the polyol method. Cellulose sheets were then prepared by dissolving natural cotton in a green and efficient NaOH/urea aqueous solution. Finally, multifunctional flexible EMI shielding AgNWs/cellulose films were fabricated based on vacuum-assisted filtration and hot-pressing. AgNWs are evenly embedded in the inner cellulose matrix and overlap with each other to form a 3D network. AgNWs/cellulose films, with a thickness of 44.5 μm, obtain the superior EMI shielding effectiveness of 101 dB, which is the highest value ever reported for shielding materials with the same thickness. In addition, AgNWs/cellulose films present excellent tensile strength (60.7 MPa) and tensile modulus (3.35 GPa), ultrahigh electrical conductivity (σ, 5571 S/cm), and excellent in-plane thermal conductivity coefficient (λ∥, 10.55 W/mK), which can effectively dissipate the heat accumulation. Interestingly, AgNWs/cellulose films also show outstanding Joule heating performances, good stability, and sensitive temperature response at driving voltages, absolutely safe for the human body. Therefore, our fabricated multifunctional flexible AgNWs/cellulose films have broad prospects in the fields of EMI shielding and protection of outdoor large-scale power transformers and wearable electronics.

Highly Thermal Conductivities, Excellent Mechanical Robustness and Flexibility, and Outstanding Thermal Stabilities of Aramid Nanofiber Composite Papers with Nacre-Mimetic Layered Structures

Abstract: Aramid nanofiber (ANF) paper has shown potential applications in flexible electronics. However, its inherent low thermal conductivity coefficient (λ) values might threaten the safety of devices under a high-power working condition. In this work, polydopamine-functionalized boron nitride nanosheet (BNNS@PDA)/ANF thermally conductive composite papers with nacre-mimetic layered structures were prepared via highly efficient vacuum-assisted filtration followed by hot pressing. For a given BNNS loading, the surface functionalization of BNNS could further enhance the thermal conductivities and mechanical properties of BNNS@PDA/ANF composite papers. BNNS@PDA/ANF composite papers presented anisotropic thermal conductivities, and the through-plane (λ⊥) and in-plane (λ∥) values of the 50 wt % BNNS@PDA/ANF composite papers reached 0.62 and 3.94 W/mK, 181.8 and 196.2% higher than those of original ANF paper, respectively, which were also higher than those of 50 wt % BNNS/ANF composite papers (λ⊥ = 0.52 W/mK and λ∥ = 3.33 W/mK). The tensile strength of the 50 wt % BNNS@PDA/ANF composite papers reached 36.8 MPa, 30.5% higher than that of 50 wt % BNNS/ANF composite papers (28.2 MPa). In addition, the heat resistance index (THRI) of the 50 wt % BNNS@PDA/ANF composite papers was further increased to 223.1 °C. Overall, our fabricated BNNS@PDA/ANF composite papers possess highly thermal conductivities, excellent mechanical robustness and flexibility, and outstanding thermal stabilities, showing great potential applications in the fields of intelligent wearable equipment, flexible supercapacitors, and flexible electronics.

Two-dimensional (2D)/2D Interface Engineering of a MoS2/C3N4 Heterostructure for Promoted Electrocatalytic Nitrogen Fixation

Abstract: The electrochemical nitrogen reduction reaction (NRR) is a very efficient method for sustainable NH3 production, but it requires effective catalysts to expedite the NRR kinetics and inhibit the con...

Wearable Capacitive Pressure Sensor Based on MXene Composite Nanofibrous Scaffolds for Reliable Human Physiological Signal Acquisition.

Abstract: In recent years, highly sensitive pressure sensors that are flexible, biocompatible, and stretchable have attracted significant research attention in the fields of wearable electronics and smart skin. However, there has been a considerable challenge to simultaneously achieve highly sensitive, low-cost sensors coupled with optimum mechanical stability and an ultralow detection limit for subtle physiological signal monitoring devices. Targeting aforementioned issues, herein, we report the facile fabrication of a highly sensitive and reliable capacitive pressure sensor for ultralow-pressure measurement by sandwiching MXene (Ti3C2Tx)/poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) composite nanofibrous scaffolds as a dielectric layer between biocompatible poly-(3,4-ethylenedioxythiophene) polystyrene sulfonate /polydimethylsiloxane electrodes. The fabricated sensor exhibits a high sensitivity of 0.51 kPa-1 and a minimum detection limit of 1.5 Pa. In addition, it also enables linear sensing over a broad pressure range (0-400 kPa) and high reliability over 10,000 cycles even at extremely high pressure (>167 kPa). The sensitivity of the nanofiber-based sensor is enhanced by MXene loading, thereby increasing the dielectric constant up to 40 and reducing the compression modulus to 58% compared with pristine PVDF-TrFE nanofiber scaffolds. The proposed sensor can be used to determine the health condition of patients by monitoring physiological signals (pulse rate, respiration, muscle movements, and eye twitching) and also represents a good candidate for a next generation human-machine interfacing device.

Facile Design of Three-Dimensional Nitrogen-Doped Reduced Graphene Oxide/Multi-Walled Carbon Nanotube Composite Foams as Lightweight and Highly Efficient Microwave Absorbers.

Abstract: Graphene foams with three-dimensional (3D) network structure, high porosity, and ultralow density have been regarded as lightweight microwave absorption materials. Herein, nitrogen-doped reduced graphene oxide/multi-walled carbon nanotube composite foams were prepared through a two-step strategy of hydrothermal self-assembly and subsequent high-temperature calcination. Morphology analysis indicated that the 3D networks were composed of overlapped flaky reduced graphene oxide. In addition, the influences of nitrogen doping, calcination temperature, and filler ratios on microwave absorption of composite foams were explored. Results manifested that the microwave absorption of composite foams was remarkably improved with the calcination temperature increased. Dramatically, it was noteworthy that the composite foam obtained under 600 °C calcination (bulk density of ∼10.8 mg/cm3) with an 8 wt % mass filler ratio presented the strongest microwave absorption of -69.6 dB at 12.5 GHz and broadest absorption bandwidth achieved 4.3 GHz (13.2-17.5 GHz) at an extremely low matching thickness equal to 1.5 mm. Moreover, the microwave absorption performance could be conveniently adjusted through modifying the thicknesses, filler ratios, and calcination temperature. The excellent microwave absorption performance of as-prepared composite foams was greatly derived from a well-constructed 3D network structure, significant nitrogen doping, enhanced polarization relaxation, and improved conduction loss. This work proposed a new strategy for fabricating graphene-based composites with a 3D network structure as high-efficiency microwave absorbers.

Room-Temperature, Highly Durable Ti3C2Tx MXene/Graphene Hybrid Fibers for NH3 Gas Sensing

Abstract: Graphene-based fibers (GFs) have aroused enormous interest in portable, wearable electronics because of their excellent mechanical flexibility, electrical conductivity, and weavability, which make them advantageous for wearable electronic devices. Herein, we report the development of metal binder-free Ti3C2Tx MXene/graphene hybrid fibers by a scalable wet-spinning process. These hybrid fibers exhibit excellent mechanical and electrical properties for applications in flexible wearable gas sensors. The synergistic effects of electronic properties and gas-adsorption capabilities of MXene/graphene allow the created fibers to show high NH3 gas sensitivity at room temperature. The hybrid fibers exhibited significantly improved NH3 sensing response (ΔR/R0 = 6.77%) compared with individual MXene and graphene. The hybrid fibers also showed excellent mechanical flexibility with a minimal fluctuation of resistance of ±0.2% and low noise resistance even after bending over 2000 cycles, enabling gas sensing during deformation. Furthermore, flexible MXene/graphene hybrid fibers were woven into a lab coat, demonstrating their high potential for wearable devices. We envisage that these exciting features of 2D hybrid materials will provide a novel pathway for designing next-generation portable wearable gas sensors.

Multifunctional Tissue-Adhesive Cryogel Wound Dressing for Rapid Nonpressing Surface Hemorrhage and Wound Repair

Abstract: Cryogels with tissue adhesion have great potential as wound dressings for rapid hemostasis for uncontrollable nonpressing surface hemorrhage and wound healing, but their use has not been reported previously. Herein, we designed a series of antibacterial and antioxidant tissue-adhesive cryogels based on quaternized chitosan (QCS) and polydopamine (PDA). These cryogels had good blood cell and platelet adhesion, enrichment, and activation properties for rapid nonpressing surface hemostasis and wound healing. The cryogels exhibited outstanding mechanical strength and easy removability, antioxidant activity, and NIR photothermal-enhanced antibacterial performance. The cryogels showed much better hemostasis than gauze and gelatin sponge in a standardized strip rat liver injury model, a standardized circular rabbit liver section model, and a pig skin laceration model. Furthermore, the excellent hemostatic performance of the QCS/PDA2.0 cryogel (containing 20 mg/mL QCS and 2.0 mg/mL PDA) for coagulopathic hemorrhages was confirmed in a standardized coagulation disorder rabbit circular liver section model. In addition, the QCS/PDA2.0 cryogel promoted rapid hemostasis in a deep noncompressible wound and a much better wound healing effect than a chitosan sponge and Tegaderm film in a full-thickness skin defect model. Overall, these multifunctional tissue-adhesive cryogels with excellent hemostatic performance and enhanced wound healing properties are suitable candidates for tissue-adhesive hemostat and wound healing dressings.

Flexible MXene/Silver Nanowire-Based Transparent Conductive Film with Electromagnetic Interference Shielding and Electro-Photo-Thermal Performance.

Abstract: Transparent conductive film (TCF) is promising for optoelectronic instrument applications. However, designing a robust, stable, and flexible TCF that can shield electromagnetic waves and work in harsh conditions remains a challenge. Herein, a multifunctional and flexible TCF with effective electromagnetic interference shielding (EMI) performance and outstanding electro-photo-thermal effect is proposed by orderly coating Ti3C2Tx MXene and a silver nanowire (AgNW) hybrid conductive network using a simple and scalable solution-processed method. Typically, the air-plasma-treated polycarbonate (PC) film was sequentially spray-coated with MXene and AgNW to construct a highly conductive network, which was transferred and partly embedded into an ultrathin poly(vinyl alcohol) (PVA) film using spin coating coupled with hot pressing to enhance the interfacial adhesion. The peeled MXene/AgNW-PVA TCF exhibits an optimal optical and electrical performance of sheet resistance 18.3 Ω/sq and transmittance 52.3%. As a consequence, the TCF reveals an effective EMI shielding efficiency of 32 dB in X-band with strong interfacial adhesion and satisfactory flexibility. Moreover, the high electrical conductivity and localized surface plasmon resonance (LSPR) effect of hybrid conductive network endow the TCF with low-voltage-driven Joule heating performance and excellent photothermal effect, respectively, which can ensure the normal functioning under extreme cold condition. In view of the comprehensive performance, this work offers new solutions for next-generation transparent EMI shielding challenges.

Carbon Nanotubes/Hydrophobically Associated Hydrogels as Ultrastretchable, Highly Sensitive, Stable Strain, and Pressure Sensors.

Abstract: Conductive hydrogels have become one of the most promising materials for skin-like sensors because of their excellent biocompatibility and mechanical flexibility. However, the limited stretchability, low toughness, and fatigue resistance lead to a narrow sensing region and insufficient durability of the hydrogel-based sensors. In this work, an extremely stretchable, highly tough, and anti-fatigue conductive nanocomposite hydrogel is prepared by integrating hydrophobic carbon nanotubes (CNTs) into hydrophobically associated polyacrylamide (HAPAAm) hydrogel. In this conductive hydrogel, amphiphilic sodium dodecyl sulfate was used to ensure uniform dispersion of CNTs in the hydrogel network, and hydrophobic interactions between the hydrogel matrix and the CNT surface formed, greatly improving the mechanical properties of the hydrogel. The obtained CNTs/HAPAAm hydrogel showed excellent stretchability (ca. 3000%), toughness (3.42 MJ m-3), and great anti-fatigue property. Moreover, it exhibits both high tensile strain sensitivity in the wide strain ranges (gauge factor = 4.32, up to 1000%) and high linear sensitivity (0.127 kPa-1) in a large-pressure region within 0-50 kPa. The CNTs/HAPAAm hydrogel-based sensors can sensitively and stably detect full-range human activities (e.g., elbow rotation, finger bending, swallowing motion, and pronouncing) and handwriting, demonstrating the CNTs/HAPAAm hydrogel's potential as the wearable strain and pressure sensors for flexible devices.

Sharpening Nanofiltration: Strategies for Enhanced Membrane Selectivity.

Abstract: Nanofiltration plays an increasingly large role in many industrial applications, such as water treatment (e.g., desalination, water softening, and fluoride removal) and resource recovery (e.g., alk...

Direct Z-Scheme 0D/2D Heterojunction of CsPbBr3 Quantum Dots/Bi2WO6 Nanosheets for Efficient Photocatalytic CO2 Reduction

Abstract: Photocatalytic CO2 reduction is an appealing approach to convert solar energy into high value-added chemicals All-inorganic CsPbBr3 quantum dots (QDs) have emerged as a promising photocatalyst for reducing CO2 However, pristine CsPbBr3 has a low catalytic performance, mainly due to severe charge recombination Herein, a 0D/2D heterojunction of CsPbBr3 QDs/Bi2WO6 nanosheet (CPB/BWO) photocatalysts is fabricated for photocatalytic CO2 reduction The CPB/BWO photocatalyst achieves excellent photocatalytic performance: the total yield of CH4/CO is 503 μmol g-1, nearly 95 times higher than the pristine CsPbBr3 The CPB/BWO heterojunction also exhibits much-improved stability during photocatalytic reactions On the basis of various characterization techniques, our investigations verified a direct Z-scheme charge migration mechanism between CsPbBr3 QDs and Bi2WO6 nanosheets The improved photocatalytic performance is originated from the high spatial separation of photoexcited charge carriers in CPB/BWO, which can also preserve strong individual redox abilities of two components This work reports an efficient direct Z-scheme heterojunction photocatalytic system based on metal halide perovskites The novel strategy we proposed may bring up new opportunities for the development of metal halide perovskite photocatalysts with greatly enhanced activities

Biomimetic Durable Multifunctional Self-Cleaning Nanofibrous Membrane with Outstanding Oil/Water Separation, Photodegradation of Organic Contaminants, and Antibacterial Performances.

Abstract: Wastewater pollution has always been one of the most severe worldwide environmental problems. In addition, in light of the frequent oil spills that have occurred in recent years, the treatment of oily wastewater is particularly important. In this work, a novel zeolitic imidazolate framework-8@thiolated graphene (ZIF-8@GSH) composites-based polyimide (PI) nanofibrous membrane was developed via a facile electrospinning and in situ hydrothermal synthesis approaches for effective purification of oily wastewater. The membrane showed superhydrophobicity/superoleophilicity and high separation efficiency (>99.9%) for a wide range of oil/water mixtures and water-in-oil emulsions. Besides, the membrane demonstrated excellent photocatalytic dye degradation, antibacterial, self-cleaning, and mechanochemical durable abilities, showing high potential in oily wastewater treatment and water remediation.

Organic Electrode Materials for Metal Ion Batteries.

Abstract: Organic and polymer materials have been extensively investigated as electrode materials for rechargeable batteries because of the low cost, abundance, environmental benignity, and high sustainabili...

Constructing Fe-MOF-Derived Z-Scheme Photocatalysts with Enhanced Charge Transport: Nanointerface and Carbon Sheath Synergistic Effect

Abstract: Creatively constructing Z-scheme composites is a promising and common strategy for designing effective photocatalyst systems. Herein, we synthesized Z-scheme Fe2O3@Ag-ZnO@C heterostructures from the Fe-MOFs and applied it to photodegradation of tetracycline and methylene blue pollutants in wastewater. The optimized sample exhibits a remarkable performance as well as stability under visible light irradiation. The calculating and experimental results demonstrate that the Fe2O3@ZnO nanointerface and carbon sheath together boost the transfer efficiency of photogenerated carriers and absorption ability, thereby improving the photocatalytic activity. Furthermore, detailed mechanism investigation reveals the pivotal role of reactive oxygen species (•OH and •O2-) generated, resulting in remarkable performance. In addition, cell biology experiments reveal that the wastewater after photocatalytic treatment has good biological compatibility, which is important for applications. This work provides valuable information for constructing high-performance Z-scheme photocatalysts from MOFs for environmental treatment.

Iodine Capture Using Zr-Based Metal-Organic Frameworks (Zr-MOFs): Adsorption Performance and Mechanism.

Abstract: The effective capture of radioiodine, produced or released from nuclear-related activities, is of paramount importance for the sustainable development of nuclear energy. Here, a series of zirconium-based metal-organic frameworks (Zr-MOFs), with a Zr6(μ3-O)4(μ3-OH)4 cluster and various carboxylate linkers, were investigated for the capture of volatile iodine. Their adsorption kinetics and recyclability were investigated in dry and humid environments. The structural change of Zr-MOFs during iodine trapping was studied using powder X-ray diffraction and pore structure measurements. Experimental spectra (Raman and X-ray photoelectron spectroscopy) and density functional theory (DFT) calculations for the linkers and Zr clusters were performed to understand the trapping mechanism of the framework. When interacting with iodine molecules, MOF-808, NU-1000, and UiO-66, with highly connected and/or rigid linkers, have better structural stability than UiO-67 and MOF-867, which have flexible linkers with less connectivity. Particularly, MOF-808, with a rigid and tritopic benzenetricarboxylate linker, has the highest iodine adsorption capacity (2.18 g/g, 80 °C), as well as the largest pore volume after iodine elution. In contrast, UiO-67, with long linear ditopic linkers, exhibits the weakest stability and lowest adsorption capacity (0.53 g/g, 80 °C) because of its most serious collapse of pore structures. After incorporating with strong electron-donating imidazole/pyridine ligands, both the stability and adsorption capacity of MOF-808/NU-1000 decrease. DFT calculations verify that the N-heterocycle groups could enhance the affinity toward iodine by strong charge transfer. DFT calculations also suggest that the terminal -OH in MOF-808 has a strong affinity toward iodine (-54 kJ/mol I2) and water (-63 kJ/mol H2O) and a weak affinity toward NO2 (-27 kJ/mol NO2). With high adsorption capacity and excellent stability, MOF-808 shows great potential for the sustainable removal of radioiodine.

Flexible MXene-Decorated Fabric with Interwoven Conductive Networks for Integrated Joule Heating, Electromagnetic Interference Shielding, and Strain Sensing Performances.

Abstract: Although flexible and multifunctional textile-based electronics are promising for wearable devices, it is still a challenge to seamlessly integrate excellent conductivity into textiles without sacrificing their intrinsic flexibility and breathability. Herein, the vertically interconnected conductive networks are constructed based on a meshy template of weave cotton fabrics with interwoven warp and weft yarns. The two-dimensional early transition metal carbides/nitrides (MXenes), with unique metallic conductivity and hydrophilic surfaces, are uniformly and intimately attached to the preformed fabric via a spray-drying coating approach. Through adjusting the spray-drying cycles, the degree of conductive interconnectivity for the fabrics is precisely tuned, thereby affording highly conductive and breathable fabrics with integrated Joule heating, electromagnetic interference (EMI) shielding and strain sensing performances. Interestingly, triggered by the interwoven conductive architecture, the MXene-decorated fabrics with a low loading of 6 wt % (0.78 mg cm-2) offer an outstanding electrical conductivity of 5 Ω sq-1. The promising electrical conductivity further endows the fabrics with superior Joule heating performance with a heating temperature up to 150 °C at a supply voltage of 6 V, excellent EMI shielding performance, and highly sensitive strain responses to human motion. Consequently, this work offers a novel strategy for the versatile design of multifunctional textile-based wearable devices.

Glycine–Chitosan-Based Flexible Biodegradable Piezoelectric Pressure Sensor

Abstract: This paper presents flexible pressure sensors based on free-standing and biodegradable glycine-chitosan piezoelectric films. Fabricated by the self-assembly of biological molecules of glycine within a water-based chitosan solution, the piezoelectric films consist of a stable spherulite structure of β-glycine (size varying from a few millimeters to 1 cm) embedded in an amorphous chitosan polymer. The polymorphic phase of glycine crystals in chitosan, evaluated by X-ray diffraction, confirms formation of a pure ferroelectric phase of glycine (β-phase). Our results show that a simple solvent-casting method can be used to prepare a biodegradable β-glycine/chitosan-based piezoelectric film with sensitivity (∼2.82 ± 0.2 mV kPa-1) comparable to those of nondegradable commercial piezoelectric materials. The measured capacitance of the β-glycine/chitosan film is in the range from 0.26 to 0.12 nF at a frequency range from 100 Hz to 1 MHz, and its dielectric constant and loss factor are 7.7 and 0.18, respectively, in the high impedance range under ambient conditions. The results suggest that the glycine-chitosan composite is a promising new biobased piezoelectric material for biodegradable sensors for applications in wearable biomedical diagnostics.

Multifunctional Bulk Hybrid Foam for Infrared Stealth,Thermal Insulation, and Microwave Absorption

Abstract: Taking serious microwave pollution issues and the complex application environment into consideration, it is quite urgent to integrate several functions into one material. Electromagnetic (EM) absorbing materials with multiple functions are highly attractive to next-generation wireless techniques and portable electronic devices. Herein, melamine foam provides a decent platform for the uniform growth of Co-based metal-organic frameworks (MOFs), which bring the as-obtained hybrid foam with three-dimensional porous network structure and combination of dielectric along with magnetic attenuation abilities as advanced materials in multifunctional fields. Remarkably, the relevant microwave absorption (MA) performance of the hybrid foam can reach an extremely high reflection loss value of -59.82 dB. Furthermore, the hybrid foam exhibits excellent infrared stealth and optimiztic heat insulation function, demonstrating the potential in plenty of practical applications. These results may arouse interests and inspirations of the elaborately design and facilely synthesis of high-performance foamlike microwave absorbers with multiple functions.

Lightweight and Robust Carbon Nanotube/Polyimide Foam for Efficient and Heat-Resistant Electromagnetic Interference Shielding and Microwave Absorption.

Abstract: Excellent electromagnetic interference (EMI) shielding ability, light weight, and good heat resistance are highly required for practical applications of EMI shielding materials, such as in areas of aerospace, aircraft, and automobiles. Herein, a lightweight and robust carbon nanotube (CNT)/polyimide (PI) foam was developed for efficient and heat-resistant EMI shielding. Thanks to poly(vinyl pyrrolidone) (PVP) as a surfactant that not only promotes the uniform dispersion of CNTs to form perfect CNT conductive networks but also can be removed in situ during the polymerization process, the density of resultant CNT/PI foam is only 32.1 mg·cm-3, and the EMI shielding effectiveness (EMI SE) is up to 41.1 dB, which represents one of the highest EMI SE values compared to previously reported polymer-based foams. The CNT/PI foam also achieves the absorption coefficient (A) of up to 82.3%, which is very impressive in CNT/polymer foams at comparable EMI SE levels. The PI matrix endows the foam with excellent heat resistance. The as-prepared CNT/PI foam presents a higher EMI SE than 35 dB even after being subjected to the flame of an alcohol burner. Moreover, the compressive strength and compressive modulus are up to 240.9 and 323.9 kPa. These results indicate its certain application potential in the harsh requirement of aeronautics and aerospace industries as a highly efficient and lightweight EMI shielding material.

Oxygen Vacancies Enabled Porous SnO2 Thin Films for Highly Sensitive Detection of Triethylamine at Room Temperature.

Abstract: Detection of volatile organic compounds (VOCs) at room temperature (RT) currently remains a challenge for metal oxide semiconductor (MOS) gas sensors. Herein, for the first time, we report on the utilization of porous SnO2 thin films for RT detection of VOCs by defect engineering of oxygen vacancies. The oxygen vacancies in the three-dimensional-ordered SnO2 thin films, prepared by a colloidal template method, can be readily manipulated by thermal annealing at different temperatures. It is found that oxygen vacancies play an important role in the RT sensing performances, which successfully enables the sensor to respond to triethylamine (TEA) with an ultrahigh response, for example, 150.5-10 ppm TEA in a highly selective manner. In addition, the sensor based on oxygen vacancy-rich SnO2 thin films delivers a fast response and recovery speed (53 and 120 s), which can be further shortened to 10 and 36 s by elevating the working temperature to 120 °C. Notably, a low detection limit of 110 ppb has been obtained at RT. The overall performances surpass most previous reports on TEA detection at RT. The outstanding sensing properties can be attributed to the porous structure with abundant oxygen vacancies, which can improve the adsorption of molecules. The oxygen vacancy engineering strategy and the on-chip fabrication of porous MOS thin film sensing layers deliver great potential for creating high-performance RT sensors.

Electromagnetic Interference Shielding Performance of Anisotropic Polyimide/Graphene Composite Aerogels

Abstract: Anisotropic polyimide (PI)/graphene composite aerogels were fabricated by unidirectional freezing. A poly(amic acid) (PAA) ammonium salt/graphene dispersion was first synthesized by mixing together PAA, H2O, triethylamine (TEA), and graphene and then was successively subjected to one-way freezing, freeze-drying, and thermal imidization. The one-way growth of ice crystals endowed the composite aerogels with highly arranged tubular pores. The PI/graphene composite aerogels possessed anisotropic conductivity, electromagnetic interference (EMI) shielding, heat transfer, and compression performance. Moreover, the composite aerogels with low density (0.076 g·cm-3) exhibited high EMI shielding effectiveness (SE) of 26.1-28.8 dB, and its specific EMI SE value achieved 1373-1518 dB·cm2·g-1 when the graphene content was 13 wt %. The main electromagnetic interference shielding mechanism of these composite aerogels was microwave absorption. The composite aerogels had excellent thermal stability, and their 5% weight loss temperature was higher than 546 °C in nitrogen. This research provided an easy and environmentally friendly approach to prepare lightweight and anisotropic PI-based composite aerogels.

Sulfur Vacancy-Rich O-Doped 1T-MoS2 Nanosheets for Exceptional Photocatalytic Nitrogen Fixation over CdS.

Abstract: Here, we reported that sulfur vacancy-rich O-doped 1T-MoS2 nanosheets (denoted as SV-1T-MoS2) can surpass the activity of Pt as cocatalysts to assist in the photocatalytic nitrogen fixation of CdS nanorods. SV-1T-MoS2 cocatalysts exhibit sulfur vacancies, O-doping, more metallic 1T phase, and high electronic conductivity, thus leading to the exposure of more active edge sites, high Brunauer-Emmett-Teller surface area, enhanced visible light absorption, and improved electron separation and transfer, which are beneficial for photocatalytic nitrogen fixation. Consequently, the optimized 30 wt % SV-1T-MoS2-/CdS composites exhibit an outstanding nitrogen fixation rate of 8220.83 μmol L-1 h-1 g-1 and long-term stability under simulated solar light irradiation, significantly higher than pure CdS nanorods, CdS-Pt (0.1 wt %), and 30 wt % 1T-MoS2/CdS composites. The catalytic mechanism of photocatalytic nitrogen fixation on SV-1T-MoS2 is discussed by density functional theory calculations.

Enhanced Electromagnetic Wave-Absorbing Performance of Magnetic Nanoparticles-Anchored 2D Ti3C2Tx MXene.

Abstract: Two-dimensional Ti3C2Tx MXene-based hybrids-anchored magnetic metal nanoparticles show a huge potential application as effective wave absorbers due to the synergistic electromagnetic (EM) loss effe...

Effective Strategy to Achieve Excellent Energy Storage Properties in Lead-Free BaTiO3-Based Bulk Ceramics

Abstract: Although extensive studies have been done on lead-free dielectric ceramics to achieve excellent dielectric behaviors and good energy storage performance, the major problem of low energy density has not been solved so far. Here, we report on designing the crossover relaxor ferroelectrics (CRFE), a crossover region between the normal ferroelectrics and relaxor ferroelectrics, as a solution to overcome the low energy density. CRFE exhibits smaller free energy and lower defect density in the modified Landau theory, which helps to obtain ultrahigh energy density and efficiency. The (1-x)Ba0.65Sr0.35TiO3-xBi(Mg2/3Nb1/3)O3 ((1-x)BST-xBMN) (x = 0, 0.08, 0.1, 0.18, 0.2) ceramic was synthesized by a solid-state reaction method. The solid solutions exhibit dielectric frequency dispersion, which suggests typical relaxor characteristics with the increasing BMN content. The crossover ferroelectrics of 0.9BST-0.1BMN ceramic possesses a high energy storage efficiency (η) of 85.71%, a high energy storage density (W) of 3.90 J/cm3, and an ultrahigh recoverable energy storage density (Wrec) of 3.34 J/cm3 under a dielectric breakdown strength of 400 kV/cm and is superior to other lead-free BaTiO3 (BT)-based energy storage ceramics. It also exhibits strong thermal stability in the temperature range from 25 to 150 °C under an electric field of 300 kV/cm, with the fluctuations below 3% and with the energy storage density and energy efficiency at about 2.8 J/cm3 and 82.93%, respectively. The enhanced recoverable energy density and breakdown strength of BT-based materials with significantly high energy efficiency make it a promising candidate to meet the wide requirements for high power applications.

Superhydrophobic ZIF-8-Based Dual-Layer Coating for Enhanced Corrosion Protection of Mg Alloy.

Abstract: Magnesium (Mg) and its alloys are regarded as the most promising engineering materials because of their unique property. However, the Mg alloys were easily corroded in humid environments, which restricted their wider applications. Herein, the superhydrophobic ZIF-8/PVDF/LDH (SZPL) double-layered coating was fabricated on Mg alloys via electrodeposition and dip-coating methods, which consisted of the underlying layered double hydroxide (LDH) transition structure and top superhydrophobic zeolitic imidazolate framework-8 (ZIF-8) layer. Besides, the LDH transition structure not only worked as a protection shield but also strengthened the binding force between the substrate and the top superhydrophobic ZIF-8 layer. The top superhydrophobic ZIF-8 layer could serve as an armor on the LDH layer to further prevent the corrosive ions from infiltrating the microporous defects. In addition, the as-prepared SZPL double-layered coating showed robust superhydrophobic and self-cleaning properties, which could block the electrolyte invasion. Furthermore, the electrochemical tests demonstrated that the SZPL coating highly enhanced the corrosion protection ability of Mg alloys. Moreover, the superhydrophobic ZIF-8-based coating could still retain excellent anticorrosion property after immersion in 3.5 wt % NaCl solution for 7 days. The enhanced anticorrosion ability was ascribed to the fact that a synergistic effect of the underlying LDH transition layer hindered the transmission of aggressive ions and the top superhydrophobic ZIF-8-based coating decreased the contact area of the substrate with corrosive solution. Therefore, such coatings offer a new strategy for fabricating excellent anticorrosive coatings with robust superhydrophobicity and self-cleaning performance on metal substrates.