Showing papers in "Advanced Materials in 2013"
TL;DR: Low onset overpotential and small Tafel slope, along with large cathodic current density and excellent durability, are all achieved for the novel hydrogen-evolution-reaction electrocatalyst.
Abstract: Defect-rich MoS2 ultrathin nanosheets are synthesized on a gram scale for electrocatalytic hydrogen evolution. The novel defect-rich structure introduces additional active edge sites into the MoS2 ultrathin nanosheets, which significantly improves their electrocatalytic performance. Low onset overpotential and small Tafel slope, along with large cathodic current density and excellent durability, are all achieved for the novel hydrogen-evolution-reaction electrocatalyst.
2,598 citations
TL;DR: Graphitic carbon nitride nanosheets are extracted via simple liquid-phase exfoliation of a layered bulk material, g-C3N4, to exhibit excellent photocatalytic activity for hydrogen evolution under visible light.
Abstract: Graphitic carbon nitride nanosheets are extracted, produced via simple liquid-phase exfoliation of a layered bulk material, g-C3N4. The resulting nanosheets, having ≈2 nm thickness and N/C atomic ratio of 1.31, show an optical bandgap of 2.65 eV. The carbon nitride nanosheets are demonstrated to exhibit excellent photocatalytic activity for hydrogen evolution under visible light.
2,137 citations
TL;DR: Electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin akin to human skin.
Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.
1,950 citations
TL;DR: This review explores different material classes for plasmonic and metamaterial applications, such as conventional semiconductors, transparent conducting oxides, perovskiteOxides, metal nitrides, silicides, germanides, and 2D materials such as graphene.
Abstract: Materials research plays a vital role in transforming breakthrough scientific ideas into next-generation technology. Similar to the way silicon revolutionized the microelectronics industry, the proper materials can greatly impact the field of plasmonics and metamaterials. Currently, research in plasmonics and metamaterials lacks good material building blocks in order to realize useful devices. Such devices suffer from many drawbacks arising from the undesirable properties of their material building blocks, especially metals. There are many materials, other than conventional metallic components such as gold and silver, that exhibit metallic properties and provide advantages in device performance, design flexibility, fabrication, integration, and tunability. This review explores different material classes for plasmonic and metamaterial applications, such as conventional semiconductors, transparent conducting oxides, perovskite oxides, metal nitrides, silicides, germanides, and 2D materials such as graphene. This review provides a summary of the recent developments in the search for better plasmonic materials and an outlook of further research directions.
1,836 citations
TL;DR: All carbon aerogels with ultralow density and temperature-invariant super-elasticity are fabricated by facile assembling of commercial carbon nanotubes and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.
Abstract: All carbon aerogels (up to 1000 cm(3)) with ultralow density (down to 0.16 mg cm(-3)) and temperature-invariant (-190-900 °C) super-elasticity are fabricated by facile assembling of commercial carbon nanotubes (CNTs) and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.
1,680 citations
TL;DR: It is believed that high electrical conductivity and connectivity of the conductive fi llers can improve EMI shielding performance.
Abstract: IO N The rapid development of modern electronics packed with highly integrated circuits generates severe electromagnetic radiation, which leads to harmful effects on highly sensitive precision electronic equipment as well as the living environment for human beings. Great effort has been made for the development of high-performance electromagnetic interference (EMI) shielding materials. In addition to high EMI shielding performance, being lightweight and fl exible are two other important technical requirements for effective and practical EMI shielding applications especially in areas of aircraft, aerospace, automobiles, and fast-growing next-generation fl exible electronics such as portable electronics and wearable devices. [ 1 ] Recently, electrically conductive polymer composites have received much attention for EMI shielding applications, [ 1–12 ] because of their light weight, resistance to corrosion, fl exibility, good processability, and low cost compared to the conventional metal-based materials. The EMI shielding effectiveness of the polymer composites depends critically on the intrinsic electrical conductivity, dielectric constant, magnetic permeability, aspect ratio, and content of conductive fi llers. [ 1–12 ] It is believed that high electrical conductivity and connectivity of the conductive fi llers can improve EMI shielding performance. [ 1 , 2 , 4 , 7 , 8 ]
1,621 citations
TL;DR: Benefitting from their naturally wide distribution in humans, dopamine-melanin colloidal nanospheres exhibit robust biocompatibility and biodegradability, and can efficiently damage tumors at low power density and short irradiation time without damaging healthy tissues.
Abstract: A new generation of photothermal therapeutic agents based on biopolymer dopamine-melanin colloidal nanospheres is described. Benefitting from their naturally wide distribution in humans, dopamine-melanin colloidal nanospheres exhibit robust biocompatibility and biodegradability, and provide up to 40% photothermal conversion efficiency. After administration, they can efficiently damage tumors at low power density and short irradiation time without damaging healthy tissues.
1,604 citations
TL;DR: This review focuses on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions.
Abstract: With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering - the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue - is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three-dimensional tissue-like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell-laden hydrogels are commonly used in biofabrication and are termed "bioinks". Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three-dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically-relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico-chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a "printable" hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
1,468 citations
TL;DR: All-solid-state donor/acceptor planar-heterojunction (PHJ) hybrid solar cells are constructed and their excellent performance measured.
Abstract: All-solid-state donor/acceptor planar-heterojunction (PHJ) hybrid solar cells are constructed and their excellent performance measured. The deposition of a thin C60 fullerene or fullerene-derivative (acceptor) layer in vacuum on a CH3 NH3 PbI3 perovskite (donor) layer creates a hybrid PHJ that displays the photovoltaic effect. Such heterojunctions are shown to be suitable for the development of newly structured, hybrid, efficient solar cells.
1,327 citations
TL;DR: The resulting graphene aerogels with density as low as 3 mg cm(-3) show excellent resilience and can completely recover after more than 90% compression.
Abstract: Chemically converted graphene aerogels with ultralight density and high compressibility are prepared by diamine-mediated functionalization and assembly, followed by microwave irradiation. The resulting graphene aerogels with density as low as 3 mg cm(-3) show excellent resilience and can completely recover after more than 90% compression. The ultralight graphene aerogels possessing high elasticity are promising as compliant and energy-absorbing materials.
1,225 citations
TL;DR: The calculated properties explain the experimental observation that Cu poor and Zn rich conditions result in the highest solar cell efficiency, as well as suggesting an efficiency limitation in Cu2ZnSn(S,Se)4 cells when the S composition is high.
Abstract: The kesterite-structured semiconductors Cu2ZnSnS4 and Cu2ZnSnSe4 are drawing considerable attention recently as the active layers in earth-abundant low-cost thin-film solar cells. The additional number of elements in these quaternary compounds, relative to binary and ternary semiconductors, results in increased flexibility in the material properties. Conversely, a large variety of intrinsic lattice defects can also be formed, which have important influence on their optical and electrical properties, and hence their photovoltaic performance. Experimental identification of these defects is currently limited due to poor sample quality. Here recent theoretical research on defect formation and ionization in kesterite materials is reviewed based on new systematic calculations, and compared with the better studied chalcopyrite materials CuGaSe2 and CuInSe2 . Four features are revealed and highlighted: (i) the strong phase-competition between the kesterites and the coexisting secondary compounds; (ii) the intrinsic p-type conductivity determined by the high population of acceptor CuZn antisites and Cu vacancies, and their dependence on the Cu/(Zn+Sn) and Zn/Sn ratio; (iii) the role of charge-compensated defect clusters such as [2CuZn +SnZn ], [VCu +ZnCu ] and [ZnSn +2ZnCu ] and their contribution to non-stoichiometry; (iv) the electron-trapping effect of the abundant [2CuZn +SnZn ] clusters, especially in Cu2ZnSnS4. The calculated properties explain the experimental observation that Cu poor and Zn rich conditions (Cu/(Zn+Sn) ≈ 0.8 and Zn/Sn ≈ 1.2) result in the highest solar cell efficiency, as well as suggesting an efficiency limitation in Cu2ZnSn(S,Se)4 cells when the S composition is high.
TL;DR: Various fundamental studies that have been conducted to understand structural and volumetric changes, stress evolution, mechanical properties, and fracture behavior of nanostructured Si anodes for lithium-ion batteries are reviewed and the reaction process of Si is compared to other novel anode materials.
Abstract: Alloying anodes such as silicon are promising electrode materials for next-generation high energy density lithium-ion batteries because of their ability to reversibly incorporate a high concentration of Li atoms. However, alloying anodes usually exhibit a short cycle life due to the extreme volumetric and structural changes that occur during lithium insertion/extraction; these transformations cause mechanical fracture and exacerbate side reactions. To solve these problems, there has recently been significant attention devoted to creating silicon nanostructures that can accommodate the lithiation-induced strain and thus exhibit high Coulombic efficiency and long cycle life. In parallel, many experiments and simulations have been conducted in an effort to understand the details of volumetric expansion, fracture, mechanical stress evolution, and structural changes in silicon nanostructures. The fundamental materials knowledge gained from these studies has provided guidance for designing optimized Si electrode structures and has also shed light on the factors that control large-volume change solid-state reactions. In this paper, we review various fundamental studies that have been conducted to understand structural and volumetric changes, stress evolution, mechanical properties, and fracture behavior of nanostructured Si anodes for lithium-ion batteries and compare the reaction process of Si to other novel anode materials.
TL;DR: This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures.
Abstract: Study of flexible nanodielectric materials (FNDMs) with high permittivity is one of the most active academic research areas in advanced functional materials. FNDMs with excellent dielectric properties are demonstrated to show great promise as energy-storage dielectric layers in high-performance capacitors. These materials, in common, consist of nanoscale particles dispersed into a flexible polymer matrix so that both the physical/chemical characteristics of the nanoparticles and the interaction between the nanoparticles and the polymers have crucial effects on the microstructures and final properties. This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures. Possible reasons for several persistent issues are analyzed and the general strategies to realize FNDMs with excellent integral properties are summarized. The review further highlights some exciting examples of these FNDMs for power-energy-storage applications.
TL;DR: Inverted polymer solar cells with the ZnO-C60 cathode display markedly improved power conversion efficiency compared to those with a pristine ZNO cathode, especially when the active layer includes the low-bandgap polymer PTB7-Th.
Abstract: Modification of a ZnO cathode by doping it with a hydroxyl-containing derivative - giving a ZnO-C60 cathode - provides a fullerene-derivative-rich surface and enhanced electron conduction. Inverted polymer solar cells with the ZnO-C60 cathode display markedly improved power conversion efficiency compared to those with a pristine ZnO cathode, especially when the active layer includes the low-bandgap polymer PTB7-Th.
TL;DR: 3D interdigitated microbattery architectures fabricated by printing concentrated lithium oxide-based inks exhibit high areal energy and power densities, which may find potential application in autonomously powered microdevices.
Abstract: 3D interdigitated microbattery architectures (3D-IMA) are fabricated by printing concentrated lithium oxide-based inks. The microbatteries are composed of interdigitated, high-aspect ratio cathode and anode structures. Our 3D-IMA, which exhibit high areal energy and power densities, may find potential application in autonomously powered microdevices.
TL;DR: This review suggests that organic phototransistors have a large potential to be used in a variety of optoelectronic peculiar applications, such as a photo-sensor, opto-isolator, image sensor, optically controlled phase shifter, and opto -electronic switch and memory.
Abstract: While organic electronics is mostly dominated by light-emitting diodes, photovoltaic cells and transistors, optoelectronics properties peculiar to organic semiconductors make them interesting candidates for the development of innovative and disruptive applications also in the field of light signal detection. In fact, organic-based photoactive media combine effective light absorption in the region of the spectrum from ultraviolet to near-infrared with good photogeneration yield and low-temperature processability over large areas and on virtually every substrate, which might enable innovative optoelectronic systems to be targeted for instance in the field of imaging, optical communications or biomedical sensing. In this review, after a brief resume of photogeneration basics and of devices operation mechanisms, we offer a broad overview of recent progress in the field, focusing on photodiodes and phototransistors. As to the former device category, very interesting values for figures of merit such as photoconversion efficiency, speed and minimum detectable signal level have been attained, and even though the simultaneous optimization of all these relevant parameters is demonstrated in a limited number of papers, real applications are within reach for this technology, as it is testified by the increasing number of realizations going beyond the single-device level and tackling more complex optoelectronic systems. As to phototransistors, a more recent subject of study in the framework of organic electronics, despite a broad distribution in the reported performances, best photoresponsivities outperform amorphous silicon-based devices. This suggests that organic phototransistors have a large potential to be used in a variety of optoelectronic peculiar applications, such as a photo-sensor, opto-isolator, image sensor, optically controlled phase shifter, and opto-electronic switch and memory.
TL;DR: This review article takes a retrospective look at the research and development of OPV, and focuses on recent advances of solution-processed materials and devices during the last decade, particular the polymer version of the materials and Devices.
Abstract: Organic photovoltaic (OPV) technology has been developed and improved from a fancy concept with less than 1% power conversion efficiency (PCE) to over 10% PCE, particularly through the efforts in the last decade. The significant progress is the result of multidisciplinary research ranging from chemistry, material science, physics, and engineering. These efforts include the design and synthesis of novel compounds, understanding and controlling the film morphology, elucidating the device mechanisms, developing new device architectures, and improving large-scale manufacture. All of these achievements catalyzed the rapid growth of the OPV technology. This review article takes a retrospective look at the research and development of OPV, and focuses on recent advances of solution-processed materials and devices during the last decade, particular the polymer version of the materials and devices. The work in this field is exciting and OPV technology is a promising candidate for future thin film solar cells.
TL;DR: Bonds formed between graphene and SnO2 nanocrystals limit the aggregation of in situ formed Sn nanoparticles, leading to a stable hybrid anode material with long cycle life.
Abstract: Hybrid anode materials for Li-ion batteries are fabricated by binding SnO2 nanocrystals (NCs) in nitrogen-doped reduced graphene oxide (N-RGO) sheets by means of an in situ hydrazine monohydrate vapor reduction method. The SnO2NCs in the obtained SnO2NC@N-RGO hybrid material exhibit exceptionally high specific capacity and high rate capability. Bonds formed between graphene and SnO2 nanocrystals limit the aggregation of in situ formed Sn nanoparticles, leading to a stable hybrid anode material with long cycle life.
TL;DR: Flexible graphene fi ber (GF) stands for a new type of fi ber of practical importance, which integrates such unique properties as high strength, electrical and thermal conductivities of individual graphene sheets into the useful, macroscopic ensembles.
Abstract: Flexible graphene fi ber (GF) stands for a new type of fi ber of practical importance, which integrates such unique properties as high strength, electrical and thermal conductivities of individual graphene sheets into the useful, macroscopic ensembles. GFs possess the common characteristics of fi bers like the mechanical fl exibility for textiles, while maintaining the uniqueness such as low cost, light weight, and ease of functionalization in comparison with conventional carbon fi bers. [ 1–3 ] Due to the extraordinary challenge to assemble two-dimensional (2D) microcosmic graphene sheets with irregular size and shape into macroscopic fi brillar confi guration, however, the success in fabrication of neat graphene fi bers only comes true recently. [ 1–4 ]
TL;DR: A superhydrophobic-superoleophilic PVDF membrane is fabricated via an inert solvent-induced phase inversion for effective separation of both micrometer and nanometer-sized surfactant-free and surfactants-stabilized water-in-oil emulsions solely driven by gravity.
Abstract: A superhydrophobic-superoleophilic PVDF membrane is fabricated via an inert solvent-induced phase inversion for effective separation of both micrometer and nanometer-sized surfactant-free and surfactant-stabilized water-in-oil emulsions solely driven by gravity, with high separation efficiency (oil purity in filtrate after separation > 99.95 wt%) and high flux, which is several times higher than those of commercial filtration membranes and reported materials with similar permeation properties.
TL;DR: A new type of piezoresistive sensor with ultra-high-pressure sensitivity in low pressure range and minimum detectable pressure of 9 Pa has been fabricated using a fractured microstructure design in a graphene-nanosheet-wrapped polyurethane (PU) sponge.
Abstract: A fractured microstructure design: A new type of piezoresistive sensor with ultra-high-pressure sensitivity (0.26 kPa(-1) ) in low pressure range (<2 kPa) and minimum detectable pressure of 9 Pa has been fabricated using a fractured microstructure design in a graphene-nanosheet-wrapped polyurethane (PU) sponge. This low-cost and easily scalable graphene-wrapped PU sponge pressure sensor has potential application in high-spatial-resolution, artificial skin without complex nanostructure design.
TL;DR: As a highly integrated binder- and conductive-agent-free electrode for supercapacitors, the mesoporous NiCo(2) O(4) nanosheets supported on Ni foam deliver ultrahigh capacitance and excellent high-rate cycling stability.
Abstract: Mesoporous NiCo(2) O(4) nanosheets can be directly grown on various conductive substrates, such as Ni foam, Ti foil, stainless-steel foil and flexible graphite paper, through a general template-free solution method combined with a simple post annealing treatment. As a highly integrated binder- and conductive-agent-free electrode for supercapacitors, the mesoporous NiCo(2) O(4) nanosheets supported on Ni foam deliver ultrahigh capacitance and excellent high-rate cycling stability.
TL;DR: A phototransistor based on a chemical vapor deposited MoS2 monolayer exhibits a high photoresponsivity and an excellent photogain and the presence of shallow traps contributes to the persistent photoconductivity.
Abstract: A phototransistor based on a chemical vapor deposited (CVD) MoS2 monolayer exhibits a high photoresponsivity (2200 A W(-1) ) and an excellent photogain (5000). The presence of shallow traps contributes to the persistent photoconductivity. Ambient adsorbates act as p-dopants to MoS2 , decreasing the carrier mobility, photoresponsivity, and photogain.
TL;DR: A simple and economical thermal annealing method is developed for the synthesis of phosphorus-doped graphene, which exhibits remarkable electrocatalytic activity towards the oxygen reduction reaction and enhances the electrochemical performance as an anode material for lithium ion batteries.
Abstract: We develop a simple and economical thermal annealing method for the synthesis of phosphorus-doped graphene, which exhibits remarkable electrocatalytic activity towards the oxygen reduction reaction and enhances the electrochemical performance as an anode material for lithium ion batteries. The experimental results suggest the significant role of phosphorus atoms in graphene.
TL;DR: A flexible solid-state asymmetric supercapacitor device with H-TiO(2) @MnO (2) core-shell NWs as the positive electrode and H- TiO( 2) @C core- shell NWsas the negative electrode is developed, able to deliver a high specific capacitance and maximum volumetric energy density.
Abstract: A flexible solid-state asymmetric supercapacitor device with H-TiO(2) @MnO(2) core-shell NWs as the positive electrode and H-TiO(2) @C core-shell NWs as the negative electrode is developed. This device operates in a 1.8 V voltage window and is able to deliver a high specific capacitance of 139.6 F g(-1) and maximum volumetric energy density of 0.30 mWh cm(-3) with excellent cycling performance and good flexibility.
TL;DR: This review summarizes the current knowledge and provides a detailed description of the relevant principles for exciton-quenching mechanisms, both for phosphorescent and fluorescent emitter molecules, and further review methods that may reduce the roll-off and thus enable OLEDs to be used in high-brightness applications.
Abstract: Organic light-emitting diodes (OLEDs) have attracted much attention in research and industry thanks to their capability to emit light with high efficiency and to deliver high-quality white light that provides good color rendering. OLEDs feature homogeneous large area emission and can be produced on flexible substrates. In terms of efficiency, OLEDs can compete with highly efficient conventional light sources but their efficiency typically decreases at high brightness levels, an effect known as efficiency roll-off. In recent years, much effort has been undertaken to understand the underlying processes and to develop methods that improve the high-brightness performance of OLEDs. In this review, we summarize the current knowledge and provide a detailed description of the relevant principles, both for phosphorescent and fluorescent emitter molecules. In particular, we focus on exciton-quenching mechanisms, such as triplet-triplet annihilation, quenching by polarons, or field-induced quenching, but also discuss mechanisms such as changes in charge carrier balance. We further review methods that may reduce the roll-off and thus enable OLEDs to be used in high-brightness applications.
TL;DR: It is shown that triplet states can be harvested with 100% efficiency via TADF, even in materials with ΔEST of more than 20 kT (where k is the Boltzmann constant and T is the temperature) at room temperature.
Abstract: Organic light-emitting diodes (OLEDs) have their performance limited by the number of emissive singlet states created upon charge recombination (25%). Recently, a novel strategy has been proposed, based on thermally activated up-conversion of triplet to singlet states, yielding delayed fluorescence (TADF), which greatly enhances electroluminescence. The energy barrier for this reverse intersystem crossing mechanism is proportional to the exchange energy (ΔEST ) between the singlet and triplet states; therefore, materials with intramolecular charge transfer (ICT) states, where it is known that the exchange energy is small, are perfect candidates. However, here it is shown that triplet states can be harvested with 100% efficiency via TADF, even in materials with ΔEST of more than 20 kT (where k is the Boltzmann constant and T is the temperature) at room temperature. The key role played by lone pair electrons in achieving this high efficiency in a series of ICT molecules is elucidated. The results show the complex photophysics of efficient TADF materials and give clear guidelines for designing new emitters.
TL;DR: A progress report on the use of galvanic replacement for generating complex hollow nanostructures with tunable and well-controlled properties and its capability to fabricate nanomaterials with complex structures and/or compositions by coupling with other processes such as co-reduction and the Kirkendall effect.
Abstract: This article provides a progress report on the use of galvanic replacement for generating complex hollow nanostructures with tunable and well-controlled properties. We begin with a brief account of the mechanistic understanding of galvanic replacement, specifically focused on its ability to engineer the properties of metal nanostructures in terms of size, composition, structure, shape, and morphology. We then discuss a number of important concepts involved in galvanic replacement, including the facet selectivity involved in the dissolution and deposition of metals, the impacts of alloying and dealloying on the structure and morphology of the final products, and methods for promoting or preventing a galvanic replacement reaction. We also illustrate how the capability of galvanic replacement can be enhanced to fabricate nanomaterials with complex structures and/or compositions by coupling with other processes such as co-reduction and the Kirkendall effect. Finally, we highlight the use of such novel metal nanostructures fabricated via galvanic replacement for applications ranging from catalysis to plasmonics and biomedical research, and conclude with remarks on prospective future directions.
TL;DR: Recent progress in the development of electrolyte-gated transistors (EGTs) for organic and printed electronics is summarized and key developments in electrolyte materials for use in printed electronics are reviewed.
Abstract: Here we summarize recent progress in the development of electrolyte-gated transistors (EGTs) for organic and printed electronics. EGTs employ a high capacitance electrolyte as the gate insulator; the high capacitance increases drive current, lowers operating voltages, and enables new transistor architectures. Although the use of electrolytes in electronics is an old concept going back to the early days of the silicon transistor, new printable, fast-response polymer electrolytes are expanding the potential applications of EGTs in flexible, printed digital circuits, rollable displays, and conformal bioelectronic sensors. This report introduces the structure and operation mechanisms of EGTs and reviews key developments in electrolyte materials for use in printed electronics. The bulk of the article is devoted to electrical characterization of EGTs and emerging applications.
TL;DR: This progress report summarizes the numerous DPP-containing polymers recently developed for field-effect transistor applications including diphenyl-DPP and dithienyl- DPP-based polymers as the most commonly reported materials and highlights fundamental structure-property relations such as the relationships between the thin film morphologies and the charge carrier mobilities observed for D PP- containing polymers.
Abstract: This progress report summarizes the numerous DPP-containing polymers recently developed for field-effect transistor applications including diphenyl-DPP and dithienyl-DPP-based polymers as the most commonly reported materials, but also difuranyl-DPP, diselenophenyl-DPP and dithienothienyl-DPP-containing polymers. We discuss the hole and electron mobilities that were reported in relation to structural properties such as alkyl substitution patterns, polymer molecular weights and solid state packing, as well as electronic properties including HOMO and LUMO energy levels. We moreover consider important aspects of ambipolar charge transport and highlight fundamental structure-property relations such as the relationships between the thin film morphologies and the charge carrier mobilities observed for DPP-containing polymers.