Showing papers in "Angewandte Chemie in 2020"

Designing a 0D/2D S-Scheme Heterojunction over Polymeric Carbon Nitride for Visible-Light Photocatalytic Inactivation of Bacteria.

Abstract: Constructing heterojunctions between two semiconductors with matched band structure is an effective strategy to acquire high-efficiency photocatalysts. The S-scheme heterojunction system has shown great potential in facilitating separation and transfer of photogenerated carriers, as well as acquiring strong photoredox ability. Herein, a 0D/2D S-Scheme heterojunction material involving CeO2 quantum dots and polymeric carbon nitride (CeO2 /PCN) is designed and constructed by in situ wet chemistry with subsequent heat treatment. This S-scheme heterojunction material shows high-efficiency photocatalytic sterilization rate (88.1 %) towards Staphylococcus aureus (S. aureus) under visible-light irradiation (λ≥420 nm), which is 2.7 and 8.2 times that of pure CeO2 (32.2 %) and PCN (10.7 %), respectively. Strong evidence of S-scheme charge transfer path is verified by theoretical calculations, in situ irradiated X-ray photoelectron spectroscopy, and electron paramagnetic resonance.

Aggregation-Induced Emission: New Vistas at the Aggregate Level

Abstract: Aggregation-induced emission (AIE) describes a photophysical phenomenon in which molecular aggregates exhibit stronger emission than the single molecules. Over the course of the last 20 years, AIE research has made great strides in material development, mechanistic study and high-tech applications. The achievements of AIE research demonstrate that molecular aggregates show many properties and functions that are absent in molecular species. In this review, we summarize the advances in the field of AIE and its related areas. We specifically focus on the new properties of materials attained by molecular aggregates beyond the microscopic molecular level. We hope this review will inspire more research into molecular ensembles at and beyond the meso level and lead to the significant progress in material and biological science.

Beyond Mechanical Recycling: Giving New Life to Plastic Waste

Abstract: Increasing the stream of recycled plastic necessitates an approach beyond the traditional recycling via melting and re-extrusion. Various chemical recycling processes have great potential to enhance recycling rates. In this Review, a summary of the various chemical recycling routes and assessment via life-cycle analysis is complemented by an extensive list of processes developed by companies active in chemical recycling. We show that each of the currently available processes is applicable for specific plastic waste streams. Thus, only a combination of different technologies can address the plastic waste problem. Research should focus on more realistic, more contaminated and mixed waste streams, while collection and sorting infrastructure will need to be improved, that is, by stricter regulation. This Review aims to inspire both science and innovation for the production of higher value and quality products from plastic recycling suitable for reuse or valorization to create the necessary economic and environmental push for a circular economy.

Interfacial design of dendrite‐free zinc anodes for aqueous zinc‐ion batteries

Abstract: Aqueous zinc-ion batteries have rapidly developed recently as promising energy storage devices in large-scale energy storage systems owing to their low cost and high safety. Research on suppressing zinc dendrite growth has meanwhile attracted widespread attention to improve the lifespan and reversibility of batteries. Herein, design methods for dendrite-free zinc anodes and their internal mechanisms are reviewed from the perspective of optimizing the host-zinc interface and the zinc-electrolyte interface. Furthermore, a design strategy is proposed to homogenize zinc deposition by regulating the interfacial electric field and ion distribution during zinc nucleation and growth. This Minireview can offer potential directions for the rational design of dendrite-free zinc anodes employed in aqueous zinc-ion batteries.

Unveiling the Activity Origin of a Copper-based Electrocatalyst for Selective Nitrate Reduction to Ammonia.

Abstract: Unveiling the active phase of catalytic materials under reaction conditions is important for the construction of efficient electrocatalysts for selective nitrate reduction to ammonia. The origin of the prominent activity enhancement for CuO (Faradaic efficiency: 95.8 %, Selectivity: 81.2 %) toward selective nitrate electroreduction to ammonia was probed. 15 N isotope labeling experiments showed that ammonia originated from nitrate reduction. 1 H NMR spectroscopy and colorimetric methods were performed to quantify ammonia. In situ Raman and ex situ experiments revealed that CuO was electrochemically converted into Cu/Cu2 O, which serves as an active phase. The combined results of online differential electrochemical mass spectrometry (DEMS) and DFT calculations demonstrated that the electron transfer from Cu2 O to Cu at the interface could facilitate the formation of *NOH intermediate and suppress the hydrogen evolution reaction, leading to high selectivity and Faradaic efficiency.

Mechanochemistry for Synthesis

Abstract: Mechanochemical solvent-free reactions by milling, grinding or other types of mechanical action have emerged as a viable alternative to solution chemistry. Mechanochemistry offers not only a possibility to eliminate the need for bulk solvent use, and reduce the generation of waste, but it also unlocks the door to a different reaction environment in which synthetic strategies, reactions and molecules previously not accessible in solution, can be achieved. This Minireview examines the potential of mechanochemistry in chemical and materials synthesis, by providing a cross-section of the recent developments in using ball milling for the formation of molecules and materials based on covalent and coordination bonds.

Compromising Science by Ignorant Instrument Calibration-Need to Revisit Half a Century of Published XPS Data.

Abstract: X-ray photoelectron spectroscopy (XPS) is an indispensable technique in modern materials science for the determination of chemical bonding as evidenced by more than 10 000 XPS papers published annually. A literature survey reveals that in the vast majority of cases an incorrect referencing of the binding energy scale is used, neglecting warnings that have been formulated from the early days of the technique. Consequences for the data reliability are disastrous and decades of XPS work require revisiting. The purpose of this Viewpoint is to highlight the existing problems, review the criticism and suggest ways forward.

Production of Hydrogen Peroxide by Photocatalytic Processes

Abstract: Hydrogen peroxide (H2 O2 ) has received increasing attention because it is not only a mild and environmentally friendly oxidant for organic synthesis and environmental remediation but also a promising new liquid fuel. The production of H2 O2 by photocatalysis is a sustainable process, since it uses water and oxygen as the source materials and solar light as the energy. Encouraging processes have been developed in the last decade for the photocatalytic production of H2 O2 . In this Review we summarize research progress in the development of processes for the photocatalytic production of H2 O2 . After a brief introduction emphasizing the superiorities of the photocatalytic generation of H2 O2 , the basic principles of establishing an efficient photocatalytic system for generating H2 O2 are discussed, highlighting the advanced photocatalysts used. This Review is concluded by a brief summary and outlook for future advances in this emerging research field.

Metal-Organic Frameworks Based Electrocatalysts for the Oxygen Reduction Reaction.

Abstract: In view of the clean and sustainable energy, metal-organic frameworks (MOFs) based materials, including pristine MOFs, MOF composites, and their derivatives are emerging as unique electrocatalysts for oxygen reduction reaction (ORR). Thanks to their tunable compositions and diverse structures, efficient MOF-based materials provide new opportunities to accelerate the sluggish ORR at the cathode in fuel cells and metal-air batteries. This Minireview first provides some introduction of ORR and MOFs, followed by the classification of MOF-based electrocatalysts towards ORR. Recent breakthroughs in engineering MOF-based ORR electrocatalysts are highlighted with an emphasis on synthesis strategy, component, morphology, structure, electrocatalytic performance, and reaction mechanism. Finally, some current challenges and future perspectives for MOF-based ORR electrocatalysts are also discussed.

Integration of Graphite and Silicon Anodes for the Commercialization of High-Energy Lithium-Ion Batteries.

Abstract: Silicon is considered a most promising anode material for overcoming the theoretical capacity limit of carbonaceous anodes. The use of nanomethods has led to significant progress being made with Si anodes to address the severe volume change during (de)lithiation. However, less progress has been made in the practical application of Si anodes in commercial lithium-ion batteries (LIBs). The drastic increase in the energy demands of diverse industries has led to the co-utilization of Si and graphite resurfacing as a commercially viable method for realizing high energy. Herein, we highlight the necessity for the co-utilization of graphite and Si for commercialization and discuss the development of graphite/Si anodes. Representative Si anodes used in graphite-blended electrodes are covered and a variety of strategies for building graphite/Si composites are organized according to their synthetic methods. The criteria for the co-utilization of graphite and Si are systematically presented. Finally, we provide suggestions for the commercialization of graphite/Si combinations.

Z-Scheme Photocatalytic Systems for Carbon Dioxide Reduction: Where Are We Now?

Abstract: Transforming CO2 into fuels by utilizing sunlight is promising to synchronously overcome global warming and energy-supply issues. It is crucial to design efficient photocatalysts with intriguing features such as robust light-harvesting ability, strong redox potential, high charge-separation, and excellent durability. Hitherto, a single-component photocatalyst is incapable to simultaneously meet all these criteria. Inspired by natural photosynthesis, constructing artificial Z-scheme photocatalysts provides a facile way to conquer these bottlenecks. In this review, we firstly introduce the fundamentals of photocatalytic CO2 reduction and Z-scheme systems. Thereafter we discuss state-of-the-art Z-scheme photocatalytic CO2 reduction, whereby special attention is placed on the predominant factors that affect photoactivity. Additionally, further modifications that are important for efficient photocatalysis are reviewed.

Lithium-Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities.

Abstract: The development of energy-storage devices has received increasing attention as a transformative technology to realize a low-carbon economy and sustainable energy supply. Lithium-sulfur (Li-S) batteries are considered to be one of the most promising next-generation energy-storage devices due to their ultrahigh energy density. Despite the extraordinary progress in the last few years, the actual energy density of Li-S batteries is still far from satisfactory to meet the demand for practical applications. Considering the sulfur electrochemistry is highly dependent on solid-liquid-solid multi-phase conversion, the electrolyte amount plays a primary role in the practical performances of Li-S cells. Therefore, a lean electrolyte volume with low electrolyte/sulfur ratio is essential for practical Li-S batteries, yet under these conditions it is highly challenging to achieve acceptable electrochemical performances regarding sulfur kinetics, discharge capacity, Coulombic efficiency, and cycling stability especially for high-sulfur-loading cathodes. In this Review, the impact of the electrolyte/sulfur ratio on the actual energy density and the economic cost of Li-S batteries is addressed. Challenges and recent progress are presented in terms of the sulfur electrochemical processes: the dissolution-precipitation conversion and the solid-solid multi-phasic transition. Finally, prospects of future lean-electrolyte Li-S battery design and engineering are discussed.

A General Route to Prepare Low-Ruthenium-Content Bimetallic Electrocatalysts for pH-Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

Abstract: A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm−2 in 1 m KOH, 0.5 m H2SO4, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm−2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.

Aggregation-Induced Emission: Recent Advances in Materials and Biomedical Applications

Abstract: The concept of aggregation-induced emission (AIE) has opened new opportunities in many research fields. Motivated by the unique feature of AIE fluorogens (AIEgens), during the past decade, many AIE molecular probes and AIE nanoparticle (NP) probes have been developed for sensing, imaging and theranostic applications with excellent performance outperforming conventional fluorescent probes. This Review summarizes the latest advancement of AIE molecular probes and AIE NP probes and their emerging biomedical applications. Special focus is to reveal how the AIE probes are evolved with the development of new multifunctional AIEgens, and how new strategies have been developed to overcome the limitations of traditional AIE probes for more translational applications via fluorescence imaging, photoacoustic imaging and image-guided photodynamic/photothermal therapy. The outlook discusses the challenges and future opportunities for AIEgens to advance the biomedical field.

When Nanozymes Meet Single-Atom Catalysis.

Abstract: Nanomaterials with enzyme-like activities, coined nanozymes, have been researched widely as they offer unparalleled advantages in terms of low cost, superior activity, and high stability. The complex structure and composition of nanozymes has led to extensive investigation of their catalytic sites at an atomic scale, and to an in-depth understanding of the biocatalysis occurring. Single-atom catalysts (SACs), characterized by atomically dispersed active sites, have provided opportunities for mimicking metalloprotease and for bridging the gap between natural enzymes and nanozymes. In this Minireview, we illustrate the unique properties of nanozymes and we discuss recent advances in the synthesis, characterization, and applications of SACs. Subsequently, we outline the impressive progress made in single-atom nanozymes and we discuss their applications in sensing, degradation of organic pollutants, and in therapeutic roles. Finally, we present the major challenges and opportunities remaining for a successful marriage of nanozymes and SACs.

Ultrathin ZnIn 2 S 4 Nanosheets Anchored on Ti 3 C 2 T X MXene for Photocatalytic H 2 Evolution

Abstract: Photocatalysts derived from semiconductor heterojunctions that harvest solar energy and catalyze reactions still suffer from low solar-to-hydrogen conversion efficiency. Now, MXene (Ti3 C2 TX ) nanosheets (MNs) are used to support the in situ growth of ultrathin ZnIn2 S4 nanosheets (UZNs), producing sandwich-like hierarchical heterostructures (UZNs-MNs-UZNs) for efficient photocatalytic H2 evolution. Opportune lateral epitaxy of UZNs on the surface of MNs improves specific surface area, pore diameter, and hydrophilicity of the resulting materials, all of which could be beneficial to the photocatalytic activity. Owing to the Schottky junction and ultrathin 2D structures of UZNs and MNs, the heterostructures could effectively suppress photoexcited electron-hole recombination and boost photoexcited charge transfer and separation. The heterostructure photocatalyst exhibits improved photocatalytic H2 evolution performance (6.6 times higher than pristine ZnIn2 S4 ) and excellent stability.

Regulating the Coordination Environment of MOF‑Templated Single‑Atom Nickel Electrocatalysts for Boosting CO 2 Reduction

Abstract: The general synthesis and control of the coordination environment of single-atom catalysts (SACs) remains a great challenge. Herein, a general host-guest cooperative protection strategy has been developed to construct SACs by introducing polypyrrole (PPy) into a bimetallic metal-organic framework. As an example, the introduction of Mg2+ in MgNi-MOF-74 extends the distance between adjacent Ni atoms; the PPy guests serve as N source to stabilize the isolated Ni atoms during pyrolysis. As a result, a series of single-atom Ni catalysts (named NiSA -Nx -C) with different N coordination numbers have been fabricated by controlling the pyrolysis temperature. Significantly, the NiSA -N2 -C catalyst, with the lowest N coordination number, achieves high CO Faradaic efficiency (98 %) and turnover frequency (1622 h-1 ), far superior to those of NiSA -N3 -C and NiSA -N4 -C, in electrocatalytic CO2 reduction. Theoretical calculations reveal that the low N coordination number of single-atom Ni sites in NiSA -N2 -C is favorable to the formation of COOH* intermediate and thus accounts for its superior activity.

The Persistent Radical Effect in Organic Synthesis

Abstract: Radical-radical couplings are mostly nearly diffusion-controlled processes. Therefore, the selective cross-coupling of two different radicals is challenging and not a synthetically valuable transformation. However, if the radicals have different lifetimes and if they are generated at equal rates, cross-coupling will become the dominant process. This high cross-selectivity is based on a kinetic phenomenon called the persistent radical effect (PRE). In this Review, an explanation of the PRE supported by simulations of simple model systems is provided. Radical stabilities are discussed within the context of their lifetimes, and various examples of PRE-mediated radical-radical couplings in synthesis are summarized. It is shown that the PRE is not restricted to the coupling of a persistent with a transient radical. If one coupling partner is longer-lived than the other transient radical, the PRE operates and high cross-selectivity is achieved. This important point expands the scope of PRE-mediated radical chemistry. The Review is divided into two parts, namely 1) the coupling of persistent or longer-lived organic radicals and 2) "radical-metal crossover reactions"; here, metal-centered radical species and more generally longer-lived transition-metal complexes that are able to react with radicals are discussed-a field that has flourished recently.

Hierarchically Ordered Porous Carbon with Atomically Dispersed FeN 4 for Ultraefficient Oxygen Reduction Reaction in Proton-Exchange Membrane Fuel Cells

Abstract: The low catalytic activity and poor mass transport capacity of platinum group metal free (PGM-free) catalysts seriously restrict the application of proton-exchange membrane fuel cells (PEMFCs). Catalysts derived from Fe-doped ZIF-8 could in theory be as active as Pt/C thanks to the high intrinsic activity of FeN4 ; however, the micropores fail to meet rapid mass transfer. Herein, an ordered hierarchical porous structure is introduced into Fe-doped ZIF-8 single crystals, which were subsequently carbonized to obtain an FeN4 -doped hierarchical ordered porous carbon (FeN4 /HOPC) skeleton. The optimal catalyst FeN4 /HOPC-c-1000 shows excellent performance with a half-wave potential of 0.80 V in 0.5 m H2 SO4 solution, only 20 mV lower than that of commercial Pt/C (0.82 V). In a real PEMFC, FeN4 /HOPC-c-1000 exhibits significantly enhanced current density and power density relative to FeN4 /C, which does not have an optimized pore structure, implying an efficient utilization of the active sites and enhanced mass transfer to promote the oxygen reduction reaction (ORR).

Coordination Tunes Selectivity: Two-Electron Oxygen Reduction on High-Loading Molybdenum Single-Atom Catalysts

Abstract: Single-atom catalysts (SACs) have great potential in electrocatalysis. Their performance can be rationally optimized by tailoring the metal atoms, adjacent coordinative dopants, and metal loading. However, doing so is still a great challenge because of the limited synthesis approach and insufficient understanding of the structure-property relationships. Herein, we report a new kind of Mo SAC with a unique O,S coordination and a high metal loading over 10 wt %. The isolation and local environment was identified by high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure. The SACs catalyze the oxygen reduction reaction (ORR) via a 2 e- pathway with a high H2 O2 selectivity of over 95 % in 0.10 m KOH. The critical role of the Mo single atoms and the coordination structure was revealed by both electrochemical tests and theoretical calculations.

Covalent Organic Frameworks: Chemical Approaches to Designer Structures and Built‐In Functions

Abstract: A new approach has been developed to design organic polymers using topology diagrams. This strategy enables covalent integration of organic units into ordered topologies and creates a new polymer form, that is, covalent organic frameworks. This is a breakthrough in chemistry because it sets a molecular platform for synthesizing polymers with predesignable primary and high-order structures, which has been a central aim for over a century but unattainable with traditional design principles. This new field has its own features that are distinct from conventional polymers. This Review summarizes the fundamentals as well as major progress by focusing on the chemistry used to design structures, including the principles, synthetic strategies, and control methods. We scrutinize built-in functions that are specific to the structures by revealing various interplays and mechanisms involved in the expression of function. We propose major fundamental issues to be addressed in chemistry as well as future directions from physics, materials, and application perspectives.

Constructing a Super‐Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Abstract: Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal-organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm-2 , near 55-times that of bare Zn anodes. Moreover, aqueous MnO2 -Zn batteries delivered a reversible capacity of 180.3 mAh g-1 and maintained a high capacity retention of 88.9 % after 600 cycles with MnO2 mass loading up to 4.2 mg cm-2 .

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production.

Abstract: It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron-hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO2 support (Pt1 /def-TiO2 ). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO2 units to generate surface oxygen vacancies and form a Pt-O-Ti3+ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt-O-Ti3+ atomic interface effectively facilitates photogenerated electrons to transfer from Ti3+ defective sites to single Pt atoms, thereby enhancing the separation of electron-hole pairs. This unique structure makes Pt1 /def-TiO2 exhibit a record-level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h-1 , exceeding the Pt nanoparticle supported TiO2 catalyst by a factor of 591.

Two-Dimensional Nanomaterials for Photothermal Therapy

Abstract: Two-dimensional (2D) nanomaterials are currently explored as novel photothermal agents because of their ultrathin structure, high specific surface area, and unique optoelectronic properties. In addition to single photothermal therapy (PTT), 2D nanomaterials have demonstrated significant potential in PTT-based synergistic therapies. In this Minireview, we summarize the recent progress in 2D nanomaterials for enhanced photothermal cancer therapy over the last five years. Their unique optical properties, typical synthesis methods, and surface modification are also covered. Emphasis is placed on their PTT and PTT-synergized chemotherapy, photodynamic therapy, and immunotherapy. The major challenges of 2D photothermal agents are addressed and the promising prospects are also presented.

RAFT‐mediated polymerization‐induced self‐assembly

Abstract: After a brief history that positions polymerization-induced self-assembly (PISA) in the field of polymer chemistry, this Review will cover the fundamentals of the PISA mechanism. Furthermore, this Review will also give an overview of some of the features and limitations of RAFT-mediated PISA in terms of the choice of the components involved, the nature of the nanoobjects that can be obtained and how the syntheses can be controlled, as well as some potential applications.

Aggregation-Induced Emission (AIE): A Historical Perspective.

Abstract: Aggregation-induced emission (AIE) has attracted considerable interest over the last twenty years. In contrast to the large number of available reviews focusing specifically on AIE, this Essay discusses the AIE phenomenon from a broader perspective, with an emphasis on early observations related to AIE made long before the term was coined. Illustrative examples are highlighted from the 20th century where fluorescence enhancement upon rigidification of dyes in viscous or solid environments or J-aggregate formation was studied. It is shown that these examples already include typical AIE luminogens such as tetraphenylethylene (TPE) as well as stilbenes and oligo- or polyphenylenevinylenes and -ethynylenes, which became important fluorescent solid-state materials in OLED research in the 1990s. Further examples include cyanine dyes such as thiazole orange (TO) or its dimers (TOTOs), which have been widely applied as molecular probes in nucleic acid research. The up to 10 000-fold fluorescence enhancement of such dyes upon intercalation into double-stranded DNA, attributable to the restricted intramolecular motion (RIM) concept, afforded commercial products for bioimaging and fluorescence sensing applications already in the early 1990s.

Advances in the Cathode Materials for Lithium Rechargeable Batteries.

Abstract: The accelerating development of technologies requires a significant energy consumption, and consequently the demand for advanced energy storage devices is increasing at a high rate. In the last two decades, lithium-ion batteries have been the most robust technology, supplying high energy and power density. Improving cathode materials is one of the ways to satisfy the need for even better batteries. Therefore developing new types of positive electrode materials by increasing cell voltage and capacity with stability is the best way towards the next-generation Li rechargeable batteries. To achieve this goal, understanding the principles of the materials and recognizing the problems confronting the state-of-the-art cathode materials are essential prerequisites. This Review presents various high-energy cathode materials which can be used to build next-generation lithium-ion batteries. It includes nickel and lithium-rich layered oxide materials, high voltage spinel oxides, polyanion, cation disordered rock-salt oxides and conversion materials. Particular emphasis is given to the general reaction and degradation mechanisms during the operation as well as the main challenges and strategies to overcome the drawbacks of these materials.

Activatable Molecular Probes for Second Near-Infrared Fluorescence, Chemiluminescence, and Photoacoustic Imaging

Abstract: Optical imaging plays a crucial role in biomedicine. However, due to strong light scattering and autofluorescence in biological tissue between 650-900 nm, conventional optical imaging often has a poor signal-to-background ratio and shallow penetration depth, which limits its ability in deep-tissue in vivo imaging. Second near-infrared fluorescence, chemiluminescence, and photoacoustic imaging modalities mitigate these issues by their respective advantages of minimized light scattering, eliminated external excitation, and ultrasound detection. To enable disease detection, activatable molecular probes (AMPs) with the ability to change their second near-infrared fluorescence, chemiluminescence, or photoacoustic signals in response to a biomarker have been developed. This Minireview summarizes the molecular design strategies, sensing mechanisms, and imaging applications of AMPs. The potential challenges and perspectives of AMPs in deep-tissue imaging are also discussed.