Showing papers in "Annual Review of Fluid Mechanics in 2006"
TL;DR: In this article, a review deals with drop impacts on thin liquid layers and dry surfaces, referred to as splashing, and their propagation is discussed in detail, as well as some additional kindred, albeit nonsplashing, phenomena like drop spreading and deposition, receding (recoil), jetting, fingering, and rebound.
Abstract: The review deals with drop impacts on thin liquid layers and dry surfaces. The impacts resulting in crown formation are referred to as splashing. Crowns and their propagation are discussed in detail, as well as some additional kindred, albeit nonsplashing, phenomena like drop spreading and deposition, receding (recoil), jetting, fingering, and rebound. The review begins with an explanation of various practical motivations feeding the interest in the fascinating phenomena of drop impact, and the above-mentioned topics are then considered in their experimental, theoretical, and computational aspects.
2,077 citations
TL;DR: The vortex wake shed by the tail differs between eel-like fishes and fishes with a discrete narrowing of the body in front of the tail, and three-dimensional effects may play a major role in determining wake structure in most fishes.
Abstract: What mechanisms of flow control do animals use to enhance hydrodynamic performance? Animals are capable of manipulating flow around the body and appendages both passively and actively. Passive mechanisms rely on structural and morphological components of the body (i.e., humpback whale tubercles, riblets). Active flow control mechanisms use appendage or body musculature to directly generate wake flow structures or stiffen fins against external hydrodynamic loads. Fish can actively control fin curvature, displacement, and area. The vortex wake shed by the tail differs between eel-like fishes and fishes with a discrete narrowing of the body in front of the tail, and three-dimensional effects may play a major role in determining wake structure in most fishes.
684 citations
TL;DR: In this paper, an overview of the properties of steady internal solitary waves and the transient processes of wave generation and evolution, primarily from the point of view of weakly nonlinear theory, of which the Korteweg-de Vries equation is the most frequently used example.
Abstract: Over the past four decades, the combination of in situ and remote sensing observations has demonstrated that long nonlinear internal solitary-like waves are ubiquitous features of coastal oceans. The following provides an overview of the properties of steady internal solitary waves and the transient processes of wave generation and evolution, primarily from the point of view of weakly nonlinear theory, of which the Korteweg-de Vries equation is the most frequently used example. However, the oceanographically important processes of wave instability and breaking, generally inaccessible with these models, are also discussed. Furthermore, observations often show strongly nonlinear waves whose properties can only be explained with fully nonlinear models.
676 citations
TL;DR: In this article, the hydrodynamics of creatures capable of sustaining themselves on the water surface by means other than flotation are considered, with particular attention given to classifying water walkers according to their principal means of weight support and lateral propulsion.
Abstract: We consider the hydrodynamics of creatures capable of sustaining themselves on the water surface by means other than flotation. Particular attention is given to classifying water walkers according to their principal means of weight support and lateral propulsion. The various propulsion mechanisms are rationalized through consideration of energetics, hydrodynamic forces applied, or momentum transferred by the driving stroke. We review previous research in this area and suggest directions for future work. Special attention is given to introductory discussions of problems not previously treated in the fluid mechanics literature, with hopes of attracting physicists, applied mathematicians, and engineers to this relatively unexplored area of fluid mechanics.
477 citations
TL;DR: A critical review of computational techniques for flow-noise prediction and the underlying theories, in which the turbulent noise source field is computed and/or modeled separately from the far-field calculation, is provided.
Abstract: This article provides a critical review of computational techniques for flow-noise prediction and the underlying theories. Hybrid approaches, in which the turbulent noise source field is computed and/or modeled separately from the far-field calculation, are afforded particular attention. Numerical methods and modern flow simulation techniques are discussed in terms of their suitability and accuracy for flow-noise calculations. Other topics highlighted include some important formulation and computational issues in the application of aeroacoustic theories, generalized acoustic analogies with better accounts of flow-sound interaction, and recent computational investigations of noise-control strategies. The review ends with an analysis of major challenges and key areas for improvement in order to advance the state of the art of computational aeroacoustics.
399 citations
TL;DR: This work examines sperm motility in the reproductive tract, ovum pickup and transport in the oviduct, as well as sperm-egg interactions, and outlines promising computational fluid dynamics frameworks that may be used to investigate these complex, fluid-structure interactions.
Abstract: Mammalian fertilization requires the coordinated activity of motile spermatozoa, muscular contractions of the uterus and oviduct, as well as ciliary beating. These elastic structures generate forces that drive fluid motion, but their configurations are, in turn, determined by the fluid dynamics. We review the basic fluid mechanical aspects of reproduction, including flagellar/ciliary beating and peristalsis. We report on recent biological studies that have shed light on the relative importance of the mechanical ingredients of reproduction. In particular, we examine sperm motility in the reproductive tract, ovum pickup and transport in the oviduct, as well as sperm-egg interactions. We review recent advances in understanding the internal mechanics of cilia and flagella, flagellar surface interaction, sperm motility in complex fluids, and the role of fluid dynamics in embryo transfer. We outline promising computational fluid dynamics frameworks that may be used to investigate these complex, fluid-structure interactions.
396 citations
TL;DR: The effects of high-frequency open-loop forcing, fundamental limitations of feedback control for a given configuration of sensors and actuators, and the development of a feedback design methodology that respects the limited range of validity of the available dynamical models are discussed.
Abstract: We review recent advances in understanding, modeling, and controlling oscillations in the flow past a cavity. The fundamental mechanisms underlying cavity flow oscillations have been known for at least 40 years, but suppressing these oscillations in a reliable and robust way is still a challenge today. Interest in controlling the flow past a cavity is motivated by aerospace applications, but in addition, cavity flows provide an attractive canonical problem for exploring general flow control techniques. The focus is on recent advances in modeling these flows, and in controlling them, using both open-loop and closed-loop techniques. A relatively new perspective is that cavity oscillations may not always be self-sustained, but under some flow conditions may be lightly damped resonances, sustained by external disturbances such as boundary layer turbulence. Areas in which our understanding is incomplete, and which deserve further study, are discussed, in particular the effects of high-frequency open-loop forcing, fundamental limitations of feedback control for a given configuration of sensors and actuators, and the development of a feedback design methodology that respects the limited range of validity of the available dynamical models.
388 citations
TL;DR: Considerable work still needs to be done before the understanding of hypersonic flow will allow for the accurate prediction of vehicle flight characteristics throughout the flight envelope from launch to orbital insertion.
Abstract: The challenges in understanding hypersonic flight are discussed and critical hypersonic aerothermodynamics issues are reviewed. The ability of current analytical methods, numerical methods, ground testing capabilities, and flight testing approaches to predict hypersonic flow are evaluated. The areas where aerothermodynamic shortcomings restrict our ability to design and analyze hypersonic vehicles are discussed, and prospects for future capabilities are reviewed. Considerable work still needs to be done before our understanding of hypersonic flow will allow for the accurate prediction of vehicle flight characteristics throughout the flight envelope from launch to orbital insertion.
210 citations
TL;DR: The significance of the aerodynamic downforce and how it improves race car performance are explained, and various methods to generate downforce such as inverted wings, diffusers, and vortex generators are discussed.
Abstract: Race car performance depends on elements such as the engine, tires, suspension, road, aerodynamics, and of course the driver. In recent years, however, vehicle aerodynamics gained increased attention, mainly due to the utilization of the negative lift (downforce) principle, yielding several important performance improvements. This review briefly explains the significance of the aerodynamic downforce and how it improves race car performance. After this short introduction various methods to generate downforce such as inverted wings, diffusers, and vortex generators are discussed. Due to the complex geometry of these vehicles, the aerodynamic interaction between the various body components is significant, resulting in vortex flows and lifting surface shapes unlike traditional airplane wings. Typical design tools such as wind tunnel testing, computational fluid dynamics, and track testing, and their relevance to race car development, are discussed as well. In spite of the tremendous progress of these design tools (due to better instrumentation, communication, and computational power), the fluid dynamic phenomenon is still highly nonlinear, and predicting the effect of a particular modification is not always trouble free. Several examples covering a wide range of vehicle shapes (e.g., from stock cars to open-wheel race cars) are presented to demonstrate this nonlinear nature of the flow field.
202 citations
TL;DR: In this paper, the disjoining pressure concept is used to describe molecular interactions between liquid, gas, and the confining solid, and methods for finding static shapes of confined bubbles are considered.
Abstract: We review mathematical models of confined bubbles, emphasizing physical mechanisms as expressed in simple geometries. Molecular interactions between liquid, gas, and the confining solid are all important and are described through the disjoining pressure concept. Methods for finding static shapes are considered. The static solution is a springboard for discussing pressure-driven and surface-tension-driven flows, both of which involve viscous effects and macroscopic films entrained near apparent contact lines. We next discuss vapor bubbles produced by thermal effects. Vaporization localized near contact lines and condensation distributed in colder parts of the interface lead to steady vapor bubbles. Their size is determined through global constraints. Unsteady vapor bubbles are discussed and we end with thoughts on open problems.
177 citations
TL;DR: In this paper, the authors reviewed the subject of fluid flow in such capillary microchannels and examined the various causes of enhanced dispersion that limit the efficiency of separation, including the interplay between fluid flow, chemistry, thermal effects and electric fields.
Abstract: Electrophoretic separation of a mixture of chemical species is a fundamental technique of great usefulness in biology, health care, and forensics. In capillary electrophoresis (which has evolved from its predecessor, slab-gel electrophoresis), the sample migrates through a single microcapillary instead of through the network of pores in a gel. A fundamental design problem is to minimize dispersion in the separation direction. Molecular diffusion is inevitable and sets a theoretical limit on the best separation that can be achieved. But in practice, there are a number of effects arising out of the interplay between fluid flow, chemistry, thermal effects, and electric fields that result in enhanced dispersion. This paper reviews the subject of fluid flow in such capillary microchannels and examines the various causes of enhanced dispersion that limit the efficiency of separation.
TL;DR: The fluid mechanics of artificial blood pumps has been studied since the early 1970s in an attempt to understand and mitigate hemolysis and thrombus formation by the device.
Abstract: The fluid mechanics of artificial blood pumps has been studied since the early 1970s in an attempt to understand and mitigate hemolysis and thrombus formation by the device. Pulsatile pumps are characterized by inlet jets that set up a rotational “washing” pattern during filling. Strong regurgitant jets through the closed artificial heart valves have Reynolds stresses on the order of 10,000 dynes/cm 2 and are the most likely cause of red blood cell damage and platelet activation. Although the flow in the pump chamber appears benign, low wall shear stresses throughout the pump cycle can lead to thrombus formation at the wall of the smaller pumps (10–50 cc). The local fluid mechanics is critical. There is a need to rapidly measure or calculate the wall shear stress throughout the device so that the results may be easily incorporated into the design process.
TL;DR: The gas-lift technique comprises the injection of gas bubbles in vertical oil wells to increase production as discussed by the authors, which is based on a reduction of the tubing gravitational pressure gradient, and several fluid-flow phenomena influencing such vertical gas-liquid flows are discussed.
Abstract: The gas-lift technique comprises the injection of gas bubbles in vertical oil wells to increase production. It is based on a reduction of the tubing gravitational pressure gradient. Several fluid-flow phenomena influencing such vertical gas-liquid flows are discussed. These effects include the radial distribution of void fraction and of gas and liquid velocity, flow regime changes, and system stability problems. Associated consequences for gas-lift performance and related optimization approaches are also discussed.
TL;DR: In this article, a review explores a wide selection of fluids topics in counterterrorism and suggests future directions, ranging from preparedness and deterrence of impending terrorist attacks to detection, response, and recovery.
Abstract: Homeland security involves many applications of fluid mechanics and offers many opportunities for research and development. This review explores a wide selection of fluids topics in counterterrorism and suggests future directions. Broad topics range from preparedness and deterrence of impending terrorist attacks to detection, response, and recovery. Specific topics include aircraft hardening, blast mitigation, sensors and sampling, explosive detection, microfluidics and labs-on-a-chip, chemical plume dispersal in urban settings, and building ventilation. Also discussed are vapor plumes and standoff detection, nonlethal weapons, airborne disease spread, personal protective equipment, and decontamination. Involvement in these applications requires fluid dynamicists to think across the traditional boundaries of the field and to work with related disciplines, especially chemistry, biology, aerosol science, and atmospheric science.
TL;DR: The wind tunnel role change has been occurring for decades as computational capability improves in all aspects as mentioned in this paper, and additional issues driving this trend are the increasing cost and time disparity between physical experiments and computations, and increasingly stringent accuracy requirements.
Abstract: Wind tunnels have wide-ranging functionality, including many applications beyond aeronautics, and historically have been the major source of information for technological aerodynamics/aeronautical applications. There are a myriad of scaling issues/differences from flight to wind tunnel, and their study and impacts are uneven and a function of the particular type of extant flow phenomena. Typically, the most serious discrepancies are associated with flow separation. The tremendous ongoing increases in numerical simulation capability are changing and in many aspects have changed the function of the wind tunnel from a (scaled) “predictor” to a source of computational calibration/validation information with the computation then utilized as the flight prediction/scaling tool. Numerical simulations can increasingly include the influences of the various scaling issues. This wind tunnel role change has been occurring for decades as computational capability improves in all aspects. Additional issues driving this trend are the increasing cost (and time) disparity between physical experiments and computations, and increasingly stringent accuracy requirements.
TL;DR: In this paper, the essential features of nonlinear and indeterminate flow problems that are otherwise intractable are derived without detailed calculation, and functional analysis based on functional analysis is developed.
Abstract: Brooke Benjamin's original theories of fluid mechanical phenomena changed our basic understanding of cavitation bubbles, surface and internal waves, gravity currents, instabilities of shear flow over flexible surfaces, and swirling flows. For some types of finite-amplitude wave phenomena, he generated integral constraints and derived new partial differential equations; by establishing their general properties he showed how they have wide application. He developed a complementary approach based on functional analysis that was quite new to fluid mechanics. He demonstrated methods for deriving, without detailed calculation, the essential features of nonlinear and indeterminate flow problems that are otherwise intractable.