Showing papers in "arXiv: Applied Physics in 2020"

Photoanodes Based on TiO$_2$ and $\alpha$-Fe$_2$O$_3$ for Solar Water Splitting Superior Role of 1D Nanoarchitectures and of Combined Heterostructures

Abstract: Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $\alpha$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode materials, mainly owing to their resistance to photocorrosion, non-toxicity, natural abundance, and low production cost. Major drawbacks are, however, an inherently low electrical conductivity and a limited hole diffusion length that significantly affect the performance of TiO$_2$ and $\alpha$-Fe$_2$O$_3$ in PEC devices. To this regard, one-dimensional (1D) nanostructuring is typically applied as it provides several superior features such as a significant enlargement of the material surface area, extended contact between the semiconductor and the electrolyte and, most remarkably, preferential electrical transport that overall suppress charge carrier recombination and improve TiO$_2$ and $\alpha$-Fe$_2$O$_3$ photo-electrocatalytic properties. The present review describes various synthetic methods, properties and PEC applications of 1D-photoanodes (nanotubes, nanorods, nanofibers, nanowires) based on titania, hematite, and on $\alpha$-Fe$_2$O$_3$/TiO$_2$ heterostructures. Various routes towards modification and enhancement of PEC activity of 1D photoanodes are also discussed including doping, decoration with co-catalysts and heterojunction engineering. Finally, the challenges related to the optimization of charge transfer kinetics in both oxides are highlighted.

Transforming heat transfer with thermal metamaterials and devices

Abstract: The demand for sophisticated tools and approaches in heat management and control has triggered fast development of emerging fields including conductive thermal metamaterials, nanophononics, far-field and near-field radiative thermal management, etc. In this review, we cast a unified perspective on the control of heat transfer, based on which the related studies can be considered as complementary paradigms toward manipulating physical parameters and realizing unprecedented phenomena in heat transfer using artificial structures, such as thermal conductivity in heat conduction, thermal emissivity in radiation, and properties related to multi-physical effects. The review is divided into three parts that focus on the three main categories of heat flow control, respectively. Thermal conduction and radiation are emphasized in the first and second parts at both macro- and micro-scale. The third part discusses the efforts to actively introduce heat sources or tune the material parameters with multi-physical effects in both conduction and radiation, including works using thermal convection. We conclude the review with challenges in this research topic and new possibilities about topological thermal effects, heat waves, and quantum thermal effects.

Electrically Reconfigurable Nonvolatile Metasurface Using Low-Loss Optical Phase Change Material

Abstract: Active metasurfaces promise reconfigurable optics with drastically improved compactness, ruggedness, manufacturability, and functionality compared to their traditional bulk counterparts. Optical phase change materials (O-PCMs) offer an appealing material solution for active metasurface devices with their large index contrast and nonvolatile switching characteristics. Here we report what we believe to be the first electrically reconfigurable nonvolatile metasurfaces based on O-PCMs. The O-PCM alloy used in the devices, Ge2Sb2Se4Te1 (GSST), uniquely combines giant non-volatile index modulation capability, broadband low optical loss, and a large reversible switching volume, enabling significantly enhanced light-matter interactions within the active O-PCM medium. Capitalizing on these favorable attributes, we demonstrated continuously tunable active metasurfaces with record half-octave spectral tuning range and large optical contrast of over 400%. We further prototyped a polarization-insensitive phase-gradient metasurface to realize dynamic optical beam steering.

The Influence of Elastic Strain on Catalytic Activity Towards the Hydrogen Evolution Reaction

Abstract: Understanding the role of elastic strain in modifying catalytic reaction rates is crucial for catalyst design, but experimentally, this effect is often coupled with a ligand effect. To isolate the strain effect, we have investigated the influence of externally applied elastic strain on the catalytic activity of metal films towards the hydrogen evolution reaction (HER). We show that elastic strain tunes the catalytic activity in a controlled and predictable way. Both theory and experiment show strain controls reactivity in a controlled manner consistent with the qualitative predictions of the HER volcano plot and the d-band theory: Ni and Pt activity were accelerated by compression, while Cu activity was accelerated by tension. By isolating the elastic strain effect from the ligand effect, this study provides a greater insight into the role of elastic strain in controlling electrocatalytic activity.

Synthesis of Fe$_3$O$_4$ nanoparticles and their magnetic properties

Abstract: Fe$_3$O$_4$ magnetic nanoparticles (MNPs) were synthesized by a co-precipitation method using sodium citrate and oleic acid as modifiers. Phase composition and microstructure analysis indicate that the sodium citrate and oleic acid have been successfully grafted onto the surface of Fe$_3$O$_4$ MNPs. The magnetic behaviors reveal that the modification can decrease the saturation magnetization of Fe$_3$O$_4$ MNPs due to the surface effect. Fe$_3$O$_4$ MNPs modified by sodiumcitrate and oleic acid show excellent dispersion capability, which should be ascribed to the great reduction of high surface energy and dipolar attraction of the nanoparticles.

An Introduction to Spin Wave Computing

Abstract: This paper provides a tutorial overview over recent vigorous efforts to develop computing systems based on spin waves instead of charges and voltages Spin-wave computing can be considered as a subfield of spintronics, which uses magnetic excitations for computation and memory applications The tutorial combines backgrounds in spin-wave and device physics as well as circuit engineering to create synergies between the physics and electrical engineering communities to advance the field towards practical spin-wave circuits After an introduction to magnetic interactions and spin-wave physics, all relevant basic aspects of spin-wave computing and individual spin-wave devices are reviewed The focus is on spin-wave majority gates as they are the most prominently pursued device concept Subsequently, we discuss the current status and the challenges to combine spin-wave gates and obtain circuits and ultimately computing systems, considering essential aspects such as gate interconnection, logic level restoration, input-output consistency, and fan-out achievement We argue that spin-wave circuits need to be embedded in conventional CMOS circuits to obtain complete functional hybrid computing systems The state of the art of benchmarking such hybrid spin-wave--CMOS systems is reviewed and the current challenges to realize such systems are discussed The benchmark indicates that hybrid spin-wave--CMOS systems promise ultralow-power operation and may ultimately outperform conventional CMOS circuits in terms of the power-delay-area product Current challenges to achieve this goal include low-power signal restoration in spin-wave circuits as well as efficient spin-wave transducers

Identifying Carbon as the Source of Visible Single Photon Emission from Hexagonal Boron Nitride

Abstract: Single photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered significant attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN and by comparing various synthesis methods, we provide direct evidence that the visible SPEs are carbon related. Room temperature optically detected magnetic resonance (ODMR) is demonstrated on ensembles of these defects. We also perform ion implantation experiments and confirm that only carbon implantation creates SPEs in the visible spectral range. Computational analysis of hundreds of potential carbon-based defect transitions suggest that the emission results from the negatively charged VBCN- defect, which experiences long-range out-of-plane deformations and is environmentally sensitive. Our results resolve a long-standing debate about the origin of single emitters at the visible range in hBN and will be key to deterministic engineering of these defects for quantum photonic devices.

Ultra-low threshold cw and pulsed lasing in tensile strained GeSn alloys

Abstract: GeSn alloys are the most promising semiconductors for light emitters entirely based on group IV elements. Alloys containing more than 8 at.% Sn have fundamental direct band-gaps, similar to conventional III-V semiconductors and thus can be employed for light emitting devices. Here, we report on GeSn microdisk lasers encapsulated with a SiNx stressor layer to produce tensile strain. A 300nm GeSn layer with 5.4 at.% Sn, which is an indirect band-gap semiconductor as-grown with a compressive strain of -0.32 %, is transformed via tensile strain engineering into a truly direct band-gap semiconductor. In this approach the low Sn concentration enables improved defect engineering and the tensile strain delivers a low density of states at the valence band edge, which is the light hole band. Continuous wave (cw) as well as pulsed lasing are observed at very low optical pump powers. Lasers with emission wavelength of 2.5 um have thresholds as low as 0.8kWcm^-2 for ns-pulsed excitation, and 1.1kWcm^-2 under cw excitation. These thresholds are more than two orders of magnitude lower than those previously reported for bulk GeSn lasers, approaching these values obtained for III-V lasers on Si. The present results demonstrate the feasabiliy and are the guideline for monolithically integrated Si-based laser sources on Si photonics platform.

The role of charge recombination to spin-triplet excitons in non-fullerene acceptor organic solar cells

Abstract: The power conversion efficiencies (PCEs) of organic solar cells (OSCs) using non-fullerene acceptors (NFAs) have now reached 18%. However, this is still lower than inorganic solar cells, for which PCEs >20% are commonplace. A key reason is that OSCs still show low open-circuit voltages (Voc) relative to their optical band gaps, attributed to non-radiative recombination. For OSCs to compete with inorganics in efficiency, all non-radiative loss pathways must be identified and where possible, removed. Here, we show that in most NFA OSCs, the majority of charge recombination at open-circuit proceeds via formation of non-emissive NFA triplet excitons (T1); in the benchmark PM6:Y6 blend, this fraction reaches 90%, contributing 60 mV to the reduction of Voc. We develop a new design to prevent recombination via this non-radiative channel through the engineering of significant hybridisation between the NFA T1 and the spin-triplet charge transfer exciton (3CTE). We model that the rate of the back charge transfer from 3CTE to T1 can be reduced by an order of magnitude, allowing re-dissociation of the 3CTE. We then demonstrate NFA systems where T1 formation is suppressed. This work therefore provides a clear design pathway for improved OSC performance to 20% PCE and beyond.

High-yield wafer-scale fabrication of ultralow-loss, dispersion-engineered silicon nitride photonic circuits

Abstract: Low-loss photonic integrated circuits (PIC) and microresonators have enabled novel applications ranging from narrow-linewidth lasers, microwave photonics, to chip-scale optical frequency combs and quantum frequency conversion. To translate these results into a widespread technology, attaining ultralow optical losses with established foundry manufacturing is critical. Recent advances in fabrication of integrated Si3N4 photonics have shown that ultralow-loss, dispersion-engineered microresonators can be attained at die-level throughput. For emerging nonlinear applications such as integrated travelling-wave parametric amplifiers and mode-locked lasers, PICs of length scales of up to a meter are required, placing stringent demands on yield and performance that have not been met with current fabrication techniques. Here we overcome these challenges and demonstrate a fabrication technology which meets all these requirements on wafer-level yield, performance and length scale. Photonic microresonators with a mean Q factor exceeding 30 million, corresponding to a linear propagation loss of 1.0 dB/m, are obtained over full 4-inch wafers, as determined from a statistical analysis of tens of thousands of optical resonances and cavity ringdown with 19 ns photon storage time. The process operates over large areas with high yield, enabling 1-meter-long spiral waveguides with 2.4 dB/m loss in dies of only 5x5 mm size. Using a modulation response measurement self-calibrated via the Kerr nonlinearity, we reveal that, strikingly, the intrinsic absorption-limited Q factor of our Si3N4 microresonators exceeds a billion. Transferring the present Si3N4 photonics technology to standard commercial foundries, and merging it with silicon photonics using heterogeneous integration technology, will significantly expand the scope of today's integrated photonics and seed new applications.

Pressure-tailored lithium deposition and dissolution in lithium metal batteries

Abstract: A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited and stripped, have never been achieved. Here, by controlling the uniaxial stack pressure during battery operation, a dense Li deposition (99.49% electrode density) with an ideal columnar structure has been achieved. Using multi-scale characterization and simulation, we elucidated the critical role of stack pressure on Li nucleation, growth and dissolution processes, and developed innovative strategies to maintain the ideal Li morphology during extended cycling. The precision manipulation of Li deposition and dissolution is a critical step to enable fast charging and low temperature operation for Li metal batteries.

High-Throughput Production of Cheap Mineral-Based 2D Electrocatalysts for High-Current-Density Hydrogen Evolution

Abstract: The high-throughput scalable production of cheap, efficient and durable electrocatalysts that work well at high current densities demanded by industry is a great challenge for the large-scale implementation of electrochemical technologies. Here we report the production of a 2D MoS2-based ink-type electrocatalyst by a scalable top-down exfoliation technique followed by a simple heat treatment. The catalyst shows a high current density of 1000 mA cm^-2 at an overpotential of 454 mV for the hydrogen evolution reaction (HER) without the need of iR correction, as well as good stability over 24 hours. Using the same method, we have, for the first time, produced a cheap MoS2 mineral-based catalyst and found that it had an excellent performance for high-current-density HER. Noteworthy, production rate of this MoS2-based catalyst is one to two orders of magnitude higher than those previously reported. In addition, the price of the MoS2 mineral is five orders of magnitude lower than commercial Pt catalysts, making the MoS2 mineral-based catalyst cheap, and the ink-type catalyst dispersions can be easily integrated with other technologies for large-scale catalyst electrode preparation. These advantages indicate the huge potentials of this method and mineral-based cheap and abundant natural resources as catalysts in the electrochemical technologies.

A universal 3D imaging sensor on a silicon photonics platform

Abstract: Accurate 3D imaging is essential for machines to map and interact with the physical world. While numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none have achieved the breadth of applicability and impact that digital image sensors have achieved in the 2D imaging world. A large-scale two-dimensional array of coherent detector pixels operating as a light detection and ranging (LiDAR) system could serve as a universal 3D imaging platform. Such a system would offer high depth accuracy and immunity to interference from sunlight, as well as the ability to directly measure the velocity of moving objects. However, due to difficulties in providing electrical and photonic connections to every pixel, previous systems have been restricted to fewer than 20 pixels. Here, we demonstrate the first large-scale coherent detector array consisting of 512 ($32 \times 16$) pixels, and its operation in a 3D imaging system. Leveraging recent advances in the monolithic integration of photonic and electronic circuits, a dense array of optical heterodyne detectors is combined with an integrated electronic readout architecture, enabling straightforward scaling to arbitrarily large arrays. Meanwhile, two-axis solid-state beam steering eliminates any tradeoff between field of view and range. Operating at the quantum noise limit, our system achieves an accuracy of $3.1~\mathrm{mm}$ at a distance of 75 metres using only $4~\mathrm{mW}$ of light, an order of magnitude more accurate than existing solid-state systems at such ranges. Future reductions of pixel size using state-of-the-art components could yield resolutions in excess of 20 megapixels for arrays the size of a consumer camera sensor. This result paves the way for the development and proliferation of low cost, compact, and high performance 3D imaging cameras.

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review

Abstract: Composite materials/structures are advancing in product efficiency, cost-effectiveness and the development of superior specific properties. There are increasing demands in their applications to load-carrying structures in aerospace, wind turbines, transportation, and medical equipment, etc. Thus robust and reliable non-destructive testing (NDT) of composites is essential to reduce safety concerns and maintenance costs. There have been various NDT methods built upon different principles for quality assurance during the whole lifecycle of a composite product. This paper reviews the most established NDT techniques for detection and evaluation of defects/damage evolution in composites. These include acoustic emission, ultrasonic testing, infrared thermography, terahertz testing, shearography, digital image correlation, as well as X-ray and neutron imaging. For each NDT technique, we cover a brief historical background, principles, standard practices, equipment and facilities used for composite research. We also compare and discuss their benefits and limitations, and further summarise their capabilities and applications to composite structures. Each NDT technique has its own potential and rarely achieves a full-scale diagnosis of structural integrity. Future development of NDT techniques for composites will be directed towards intelligent and automated inspection systems with high accuracy and efficient data processing capabilities.

Shining Light on Photoluminescence Properties of Metal Halide Perovskites

Abstract: Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science behind the remarkable nature of these materials is still not well understood. This review assesses the current understanding of the photoluminescence (PL) properties of metal halide perovskite materials and highlights key areas that require further research. Furthermore, the need to standardize the methods for characterization of PL in order to improve comparability, reliability and reproducibility of results is emphasized.

Machine Learning for Materials Developments in Metals Additive Manufacturing

Abstract: In metals additive manufacturing (AM), materials and components are concurrently made in a single process as layers of metal are fabricated on top of each other in the near-final topology required for the end-use product. Consequently, tens to hundreds of materials and part design degrees of freedom must be simultaneously controlled and understood; hence, metals AM is a highly interdisciplinary technology that requires synchronized consideration of physics, chemistry, materials science, physical metallurgy, computer science, electrical engineering, and mechanical engineering. The use of modern machine learning approaches to model these degrees of freedom can reduce the time and cost to elucidate the science of metals AM and to optimize the engineering of these complex, multidisciplinary processes. New machine learning techniques are not needed for most metals AM development; those used in other sects of materials science will also work for AM. Most prolifically, the density functional theory (DFT) community has used many of them since the early 2000s for evaluating numerous combinations of elements and crystal structures to discover new materials. This materials technologies-focused review introduces the basic mathematics and terminology of machine learning through the lens of metals AM, and then examines potential uses of machine learning to advance metals AM, highlighting the many parallels to previous efforts in materials science and manufacturing while also discussing new challenges and adaptations specific to metals AM.

Tutorial on Electromagnetic Nonreciprocity and Its Origins

Abstract: This tutorial provides an intuitive and concrete description of the phenomena of electromagnetic nonreciprocity that will be useful for readers with engineering or physics backgrounds. The notion of time reversal and its different definitions are discussed with special emphasis to its relationship with the reciprocity concept. Starting from the Onsager reciprocal relations generally applicable to many physical processes, we present the derivation of the Lorentz theorem and discuss other implications of reciprocity for electromagnetic systems. Next, we identify all possible routes towards engineering nonreciprocal devices and analyze in detail three of them: Based on external bias, based on nonlinear and time-variant systems. The principles of the operation of different nonreciprocal devices are explained. We address the similarity and fundamental difference between nonreciprocal effects and asymmetric transmission in reciprocal systems. In addition to the tutorial description of the topic, the manuscript also contains original findings. In particular, general classification of reciprocal and nonreciprocal phenomena in linear bianisotropic media based on the space- and time-reversal symmetries is presented. This classification serves as a powerful tool for drawing analogies between seemingly distinct effects having the same physical origin and can be used for predicting novel electromagnetic phenomena. Furthermore, electromagnetic reciprocity theorem for time-varying systems is derived and its applicability is discussed.

Structural Multi-Colour Invisible Inks with Submicron 4D Printing of Shape Memory Polymers

Abstract: Four-dimensional (4D) printing of shape memory polymer (SMP) imparts time responsive properties to 3D structures. Here, we explore 4D printing of a SMP in the submicron length scale, extending its applications to nanophononics. We report a new SMP photoresist based on Vero Clear achieving print features at a resolution of ~300 nm half pitch using two-photon polymerization lithography (TPL). Prints consisting of grids with size-tunable multi-colours enabled the study of shape memory effects to achieve large visual shifts through nanoscale structure deformation. As the nanostructures are flattened, the colours and printed information become invisible. Remarkably, the shape memory effect recovers the original surface morphology of the nanostructures along with its structural colour within seconds of heating above its glass transition temperature. The high-resolution printing and excellent reversibility in both microtopography and optical properties promises a platform for temperature-sensitive labels, information hiding for anti-counterfeiting, and tunable photonic devices.

Optical data transmission at 44Tb/s and 10 bits/s/Hz over the C-band with standard fibre and a single micro-comb source

Abstract: Micro-combs [1 - 4], optical frequency combs generated by integrated micro-cavity resonators, offer the full potential of their bulk counterparts [5,6], but in an integrated footprint. The discovery of temporal soliton states (DKS dissipative Kerr solitons) [4,7-11] as a means of modelocking microcombs has enabled breakthroughs in many fields including spectroscopy [12,13], microwave photonics [14], frequency synthesis [15], optical ranging [16,17], quantum sources [18,19], metrology [20,21] and more. One of their most promising applications has been optical fibre communications where they have enabled massively parallel ultrahigh capacity multiplexed data transmission [22,23]. Here, by using a new and powerful class of microcomb called soliton crystals [11], we achieve unprecedented data transmission over standard optical fibre using a single integrated chip source. We demonstrate a line rate of 44.2 Terabits per second using the telecommunications C band at 1550nm with a spectral efficiency, a critically important performance metric, of 10.4 bits/s/Hz. Soliton crystals exhibit robust and stable generation and operation as well as a high intrinsic efficiency that, together with a low soliton microcomb spacing of 48.9 GHz enable the use of a very high coherent data modulation format of 64 QAM (quadrature amplitude modulated). We demonstrate error free transmission over 75 km of standard optical fibre in the laboratory as well as in a field trial over an installed metropolitan optical fibre network. These experiments were greatly aided by the ability of the soliton crystals to operate without stabilization or feedback control. This work demonstrates the capability of optical soliton crystal microcombs to perform in demanding and practical optical communications networks.

Wafer-scale low-loss lithium niobate photonic integrated circuits

Abstract: Thin-film lithium niobate (LN) photonic integrated circuits (PICs) could enable ultrahigh performance in electro-optic and nonlinear optical devices. To date, realizations have been limited to chip-scale proof-of-concepts. Here we demonstrate monolithic LN PICs fabricated on 4- and 6-inch wafers with deep ultraviolet lithography and show smooth and uniform etching, achieving 0.27 dB/cm optical propagation loss on wafer-scale. Our results show that LN PICs are fundamentally scalable and can be highly cost-effective.

Cation controlled wetting properties of vermiculite membranes and its potential for fouling resistant oil-water separation

Abstract: The surface free energy is one of the most fundamental properties of solids, hence, manipulating the surface energy and thereby the wetting properties of solids, has tremendous potential for various physical, chemical, biological as well as industrial processes. Typically, this is achieved by either chemical modification or by controlling the hierarchical structures of surfaces. Here we report a phenomenon whereby the wetting properties of vermiculite laminates are controlled by the hydrated cations on the surface and in the interlamellar space. We find that by exploiting this mechanism, vermiculite laminates can be tuned from superhydrophillic to hydrophobic simply by exchanging the cations; hydrophilicity decreases with increasing cation hydration free energy, except for lithium. Lithium, which has a higher hydration free energy than potassium, is found to provide a superhydrophilic surface due to its anomalous hydrated structure at the vermiculite surface. Building on these findings, we demonstrate the potential application of superhydrophilic lithium exchanged vermiculite as a thin coating layer on microfiltration membranes to resist fouling, and thus, we address a major challenge for oil-water separation technology.

Low Temperature Homoepitaxy Of (010) $\beta$-Ga$_2$O$_3$ By Metalorganic Vapor Phase Epitaxy : Expanding The Growth Window

Abstract: In this work, we report on the growth of high-mobility $\beta$-Ga$_2$O$_3$ homoepitaxial thin films grown at a temperature much lower than the conventional growth temperature window for metalorganic vapor phase epitaxy. Low-temperature $\beta$-Ga$_2$O$_3$ thin films grown at 600$^{\circ}$C on Fe-doped (010) bulk substrates exhibits remarkable crystalline quality which is evident from the measured room temperature Hall mobility of 186 cm$^2$/Vs for the unintentionally doped films. N-type doping is achieved by using Si as a dopant and controllable doping in the range of 2$\times$10$^{16}$ - 2$\times$10$^{19}$ cm$^{-3}$ is studied. Si incorporation and activation is studied by comparing silicon concentration from secondary ion mass spectroscopy (SIMS) and electron concentration from temperature-dependent Hall measurements. The films exhibit high purity (low C and H concentrations) with a very low concentration of compensating acceptors (2$\times$10$^{15}$ cm$^{-3}$) even at this growth temperature. Additionally, abrupt doping profile with forward decay of $\sim$ 5nm/dec (10 times improvement compared to what is observed for thin films grown at 810$^{\circ}$C) is demonstrated by growing at a lower temperature.

Ultrafast non-volatile flash memory based on van der Waals heterostructures

Abstract: Flash memory has become a ubiquitous solid-state memory device, it is widely used in portable digital devices, computers, and enterprise applications. The development of the information age has put forward higher requirements for memory speed and retention performance. Here, we demonstrate an ultrafast non-volatile memory based on MoS2/h-BN/multi-layer graphene (MLG) van der Waals heterostructures, which has an atomic-level flat interface and achieves ultrafast writing/erasing speed (~20 ns), surpassing the reported state-of-the-art flash memory (~100 ns). The ultrafast flash memory could lay the foundation for the next-generation of high-speed non-volatile memory.

Decoupled photoelectrochemical water splitting system for centralized hydrogen production

Abstract: Photoelectrochemical (PEC) water splitting offers an elegant approach for solar energy conversion into hydrogen fuel. Large-scale hydrogen production requires stable and efficient photoelectrodes and scalable PEC cells that are fitted for safe and cost-effective operation. One of the greatest challenges is the collection of hydrogen gas from millions of PEC cells distributed in the solar field. In this work, a separate-cell PEC system with decoupled hydrogen and oxygen cells was designed for centralized hydrogen production, using 100 cm2 hematite (a-Fe2O3) photoanodes and nickel hydroxide (Ni(OH)2) / oxyhydroxide (NiOOH) electrodes as redox mediators. The operating conditions of the system components and their configuration were optimized for daily cycles, and ten 8.3 h cycles were carried out under solar simulated illumination without additional bias at an average short-circuit current of 55.2 mA. These results demonstrate successful operation of a decoupled PEC water splitting system with separate hydrogen and oxygen cells.

Topological rainbow trapping for elastic energy harvesting in graded SSH systems

Abstract: We amalgamate two fundamental designs from distinct areas of wave control in physics, and place them in the setting of elasticity. Graded elastic metasurfaces, so-called metawedges, are combined with the now classical Su-Schrieffer-Heeger (SSH) model from the field of topological insulators. The resulting structures form one-dimensional graded-SSH-metawedges that support multiple, simultaneous, topologically protected edge states. These robust, enhanced localised modes are leveraged for applications in elastic energy harvesting using the piezoelectric effect. The designs we develop are first motivated by applying the SSH model to mass-loaded Kirchhoff-Love thin elastic plates. We then extend these ideas to using graded resonant rods, and create SSH models, coupled to elastic beams and full elastic half-spaces.

Graphene-based field-effect transistor biosensors for the rapid detection and analysis of viruses: A perspective in view of COVID-19

Abstract: Current situation of COVID-19 demands a rapid, reliable, cost-effective, facile detection strategy to break the transmission chain and biosensor has emerged as a feasible solution for this purpose. Introduction of nanomaterials has undoubtedly improved the performance of biosensor and the addition of graphene enhanced the sensing ability to a peerless level. Amongst different graphene-based biosensing schemes, graphene field-effect transistor marked its unique presence owing to its ability of ultrasensitive and low-noise detection thereby facilitating instantaneous measurements even in the presence of small amounts of analytes. Recently, graphene field-effect transistor type biosensor is even successfully employed in rapid detection of SARS-CoV-2 and this triggers the interest of the scientific community in reviewing the current developments in graphene field-effect transistor. Subsequently, in this article, the recent progress in graphene field-effect transistor type biosensors for the detection of the virus is reviewed and challenges along with their strengths are discussed.

Single artificial atoms in silicon emitting at telecom wavelengths

Abstract: Given its unrivaled potential of integration and scalability, silicon is likely to become a key platform for large-scale quantum technologies. Individual electron-encoded artificial atoms either formed by impurities or quantum dots have emerged as a promising solution for silicon-based integrated quantum circuits. However, single qubits featuring an optical interface needed for large-distance exchange of information have not yet been isolated in such a prevailing semiconductor. Here we show the isolation of single optically-active point defects in a commercial silicon-on-insulator wafer implanted with carbon atoms. These artificial atoms exhibit a bright, linearly polarized single-photon emission at telecom wavelengths suitable for long-distance propagation in optical fibers. Our results demonstrate that despite its small bandgap (~ 1.1 eV) a priori unfavorable towards such observation, silicon can accommodate point defects optically isolable at single scale, like in wide-bandgap semiconductors. This work opens numerous perspectives for silicon-based quantum technologies, from integrated quantum photonics to quantum communications and metrology.

Reprogrammable plasmonic topological insulators with ultrafast control

Abstract: Topological photonics has revolutionized our understanding of light propagation, but most of current studies are focused on designing a static photonic structure. Developing a dynamic photonic topological platform to switch multiple topological functionalities at ultrafast speed is still a great challenge. Here we demonstrate an ultrafast reprogrammable plasmonic topological insulator, where the topological propagation route can be dynamically steered at nanosecond-level switching time, namely more than 10^7 times faster than the current state-of-the-art. This orders-of-magnitude improvement is achieved by using ultrafast electronic switches in an innovative way to implement the programmability. Due to the flexible programmability, many existing photonic topological functionalities can be integrated into this agile topological platform. Our work brings the current studies of photonic topological insulators to a digital and intelligent era, which could boost the development of intelligent and ultrafast photoelectric devices with built-in topological protection.

Lasing from complete set of topological states in two dimensional photonic crystal structure.

Abstract: Recently, topologically engineered photonic structures have garnered significant attention as their eigenstates may offer a new insight on photon manipulation and an unconventional route for nanophotonic devices with unprecedented functionalities and robustness. Herein, we present lasing actions at all hierarchical eigenstates that can exist in a topologically designed single two-dimensional (2D) photonic crystal (PhC) platform: 2D bulk, one-dimensional edge, and zero-dimensional corner states. In particular, multiple topological eigenstates are generated in a hierarchical manner with no bulk multipole moment. The unit cell of the topological PhC structure is a tetramer composed of four identical air holes perforated into an InGaAsP multiple-quantum-well epilayer slab. A square area of a topologically nontrivial PhC structure is surrounded by a topologically trivial counterpart, resulting in multidimensional eigenstates of one bulk, four side edges, and four corners within and at the boundaries. Spatially resolved optical excitation spontaneously results in lasing actions at all nine hierarchical topological states. Our experimental findings may provide insight into the development of sophisticated next-generation nanophotonic devices and robust integration platforms.

Integrated Cooling (i-Cool) Textile of Heat Conduction and Sweat Transportation for Personal Perspiration Management.

Abstract: Perspiration evaporation plays an indispensable role in human body heat dissipation. However, conventional textiles show limited perspiration management capability in moderate/profuse perspiration scenarios, i.e. low evaporation ability, ineffective evaporative cooling effect, and resultant human body dehydration and electrolyte disorder. Here, we propose a novel concept of integrated cooling (i-Cool) textile of heat conduction and sweat transportation for personal perspiration management based on unique functional structure design. By integrating heat conductive pathways and water transport channels decently, this textile not only shows the capability of liquid water wicking, but also exhibits superior evaporation rate than traditional textiles. Furthermore, compared with cotton, about 2.8 $^\circ$C cooling effect causing less than one third amount of dehydration has also been demonstrated on the artificial sweating skin platform with feedback control loop simulating human body perspiration situation. Moreover, the practical application feasibility of the i-Cool textile design principles has been validated as well. Owing to its exceptional personal perspiration management performance in liquid water wicking, fast evaporation, efficient cooling effect and reduced human body dehydration/electrolyte loss, we expect this i-Cool textile provides promising design guidelines for next-generation personal perspiration management textile.