Showing papers in "arXiv: Applied Physics in 2021"

Observation of higher-order non-Hermitian skin effect

Abstract: Hermitian theories play a major role in understanding the physics of most phenomena. It has been found only in the past decade that non-Hermiticity enables unprecedented effects such as exceptional points, spectral singularities and bulk Fermi arcs. Recent studies further show that non-Hermiticity can fundamentally change the topological band theory, leading to the non-Hermitian band topology and non-Hermitian skin effect, as confirmed in one-dimensional (1D) systems. However, in higher dimensions, these non-Hermitian effects remain unexplored in experiments. Here, we demonstrate the spin-polarized, higher-order non-Hermitian skin effect in two-dimensional (2D) acoustic metamaterials. Using a lattice of coupled whisper-gallery acoustic resonators, we realize a spinful 2D higher-order topological insulator (HOTI) where the spin-up and spin-down states are emulated by the anti-clockwise and clockwise modes, respectively. We find that the non-Hermiticity drives wave localizations toward opposite edge boundaries depending on the spin polarizations. More interestingly, for finite systems with both edge and corner boundaries, the higher-order non-Hermitian skin effect leads to wave localizations toward two corner boundaries for the bulk, edge and corner states in a spin-dependent manner. We further show that such a non-Hermitian skin effect enables rich wave manipulation through the loss configuration in each unit-cell. The reported spin-dependent, higher-order non-Hermitian skin effect reveals the interplay between higher-order topology and non-Hermiticity, which is further enriched by the spin degrees of freedom. This unveils a new horizon in the study of non-Hermitian physics and the design of non-Hermitian metamaterials.

Acoustic non-Hermitian skin effect from twisted winding topology

Abstract: The recently discovered non-Hermitian skin effect (NHSE) manifests the breakdown of current classification of topological phases in energy-nonconservative systems, and necessitates the introduction of non-Hermitian band topology. So far, all NHSE observations are based on one type of non-Hermitian band topology, in which the complex energy spectrum winds along a closed loop. As recently characterized along a synthetic dimension on a photonic platform, non-Hermitian band topology can exhibit almost arbitrary windings in momentum space, but their actual phenomena in real physical systems remain unclear. Here, we report the experimental realization of NHSE in a one-dimensional (1D) non-reciprocal acoustic crystal. With direct acoustic measurement, we demonstrate that a twisted winding, whose topology consists of two oppositely oriented loops in contact rather than a single loop, will dramatically change the NHSE, following previous predictions of unique features such as the bipolar localization and the Bloch point for a Bloch-wave-like extended state. This work reveals previously unnoticed features of NHSE, and provides the first observation of physical phenomena originating from complex non-Hermitian winding topology.

A Reconfigurable Intelligent Surface at mmWave based on a binary phase tunable metasurface

Abstract: Originally introduced in the early 2010's, the idea of smart environments through reconfigurable intelligent surfaces (RIS) controlling the reflections of the electromagnetic waves has attracted much attention in recent years in preparation for the future 6G. Since reconfigurable intelligent surfaces are not based on increasing the number of sources, they could indeed pave the way to greener and potentially limitless wireless communications. In this paper, we design, model and demonstrate experimentally a millimeter wave reconfigurable intelligent surface based on an electronically tunable metasurface with binary phase modulation. We first study numerically the unit cell of the metasurface, based on a PIN diode, and obtain a good phase shift and return loss for both polarizations, over a wide frequency range around 28.5 GHz. We then fabricate and characterize the unit cell and verify its properties, before fabricating the whole 10 cm x10 cm reconfigurable intelligent surface. We propose an analytical description of the use that can be done of the binary phase RIS, both in the near field (reflectarray configuration) and in the far field (access point extender). We finally verify experimentally that the designed RIS works as expected, performing laboratory experiments of millimeter wave beamforming both in the near field and far field configuration. Our experimental results demonstrate the high efficiency of our binary phase RIS to control millimeter waves in any kind of scenario and this at the sole cost of the energy dissipated by the PIN diodes used in our design.

Atomically sharp interface enabled ultrahigh-speed, nonvolatile memory devices.

Abstract: Development of memory devices with ultimate performance has played a key role in innovation of modern electronics. As a mainstream technology nonvolatile memory devices have manifested high capacity and mechanical reliability, however current major bottlenecks include low extinction ratio and slow operational speed. Although substantial effort has been employed to improve their performance, a typical hundreds of micro- or even milli- second write time remains a few orders of magnitude longer than their volatile counterparts. We have demonstrated nonvolatile, floating-gate memory devices based on van der Waals heterostructures with atomically sharp interfaces between different functional elements, and achieved ultrahigh-speed programming/erasing operations verging on an ultimate theoretical limit of nanoseconds with extinction ratio up to 10^10. This extraordinary performance has allowed new device capabilities such as multi-bit storage, thus opening up unforeseen applications in the realm of modern nanoelectronics and offering future fabrication guidelines for device scale-up.

Thermophotovoltaic Efficiency of 40

Abstract: We report the fabrication and measurement of thermophotovoltaic (TPV) cells with efficiencies of >40%. The TPV cells are 2-junction devices with high-quality 1.0-1.4 eV materials that target high emitter temperatures of 1900-2400°C. These cells can be integrated into a TPV system for thermal energy grid storage (TEGS) to enable dispatchable renewable energy. With these new TPV cells, TEGS has a pathway to reach sufficiently high efficiency and sufficiently low cost to enable full decarbonization of the grid. Furthermore, the high demonstrated efficiency gives TPV the potential to compete with turbine-based heat engines for large-scale power production with respect to both cost and performance, thereby enabling possible usage in natural gas or hydrogen-fueled electricity production.

Phase-Induced Frequency Conversion and Doppler Effect with Time-Modulated Metasurfaces

Abstract: Metasurfaces consisting of electrically thin and densely packed planar arrays of subwavelength elements enable an unprecedented control of the impinging electromagnetic fields. Spatially modulated metasurfaces can efficiently tailor the spatial distribution of these fields with great flexibility. Similarly, time modulated metasurfaces can be successfully used to manipulate the frequency content and time variations of the impinging field. In this paper, we present time-modulated reflective metasurfaces that cause a frequency shift to the impinging radiation, thus realizing an artificial Doppler effect in a non-moving electrically thin structure. Starting from the theoretical analysis, we analytically derive the required time modulation of the surface admittance to achieve this effect, and present a realistic time-varying structure, based on a properly designed and dynamically tuned high-impedance surface. It is analytically and numerically demonstrated that the field emerging from the metasurface is up-,down-converted in frequency according to the modulation profile of the metasurface. The proposed metasurface concept, enabling a frequency modulation of the electromagnetic field on-the-fly, may find application in telecommunication, radar, and sensing scenarios.

Multi-kV class $\beta$-Ga$_2$O$_3$ MESFETs with a Lateral Figure of Merit up to 355 MW/cm$^2$

Abstract: We demonstrate over 3 kV gate-pad-connected field plated (GPFP) $\beta$-Ga$_2$O$_3$ lateral MESFETs with high lateral figure of merit (LFOM) using metalorganic vapor phase epitaxy (MOVPE) grown channel layers and regrown ohmic contact layers. Contact resistance (R$_C$) as low as 1.4 $\Omega$.mm is achieved using an improved low-temperature MOVPE selective area regrowth process. The GPFP design adopted here using PECVD deposited SiN$_x$ dielectric and SiN$_x$/SiO$_2$ wrap-around passivation exhibits up to ~14% improved R$_{ON}$, up to ~70% improved breakdown voltage (V$_{BR}$) resulting in up to over 3$\times$ higher LFOM compared to non-FP $\beta$-Ga$_2$O$_3$ lateral MESFETs. The V$_{BR}$ (~2.5 kV) and LFOM (355 MW/cm$^2$) measured simultaneously in our GPFP $\beta$-Ga$_2$O$_3$ lateral MESFET (with L$_{GD}$ = 10 $\mu$m) is the highest value achieved in any depletion-mode $\beta$-Ga$_2$O$_3$ lateral device.

Triplet Fusion Upconversion Nanocapsules for Volumetric 3D Printing

Abstract: Two-photon photopolymerization delivers prints without support structures and minimizes layering artifacts in a broad range of materials. This volumetric printing approach scans a focused light source throughout the entire volume of a resin vat and takes advantage of the quadratic power dependence of two photon absorption to produce photopolymerization exclusively at the focal point. While this approach has advantages, the widespread adoption of two photon photopolymerization is hindered by the need for expensive ultrafast lasers and extremely slow print speeds. Here we present an analogous quadratic process, triplet-triplet-annihilation-driven 3D printing, that enables volumetric printing at a focal point driven by <4 milliwatt-power continuous wave excitation. To induce photopolymerization deep within a vat, the key advance is the nanoencapsulation of photon upconversion solution within a silica shell decorated with solubilizing polymer ligands. This scalable self-assembly approach allows for scatter-free nanocapsule dispersal in a variety of organic media without leaking the capsule contents. We further introduce an excitonic strategy to systematically control the upconversion threshold to support either monovoxel or parallelized printing schemes, printing at power densities multiple orders of magnitude lower than power densities required for two-photon-based 3D printing. The application of upconversion nanocapsules to volumetric 3D printing provides access to the benefits of volumetric printing without the current cost, power, and speed drawbacks. The materials demonstrated here open opportunities for other triplet fusion upconversion-controlled applications.

Volumetric Additive Manufacturing of Silica Glass with Microscale Computed Axial Lithography

Abstract: Glass is increasingly desired as a material for manufacturing complex microscopic geometries, from the micro-optics in compact consumer products to microfluidic systems for chemical synthesis and biological analyses. As the size, geometric, surface roughness, and mechanical strength requirements of glass evolve, conventional processing methods are challenged. We introduce microscale computed axial lithography (micro-CAL) of fused silica components, by tomographically illuminating a photopolymer-silica nanocomposite which is then sintered. We fabricated 3D microfluidics with internal diameters of 150 micrometers, freeform micro-optical elements with surface roughness of 6 nm, and complex high-strength trusses and lattice structures with minimum feature sizes of 50 micrometers. As a high-speed, layer-free digital light manufacturing process, micro-CAL can process extremely viscous nanocomposites with high geometric freedom, enabling new device structures and applications.

Electrically-pumped high-power laser transmitter integrated on thin-film lithium niobate

Abstract: Integrated thin-film lithium niobate (TFLN) photonics has emerged as a promising platform for realization of high-performance chip-scale optical systems. Of particular importance are TFLN electro-optic modulators featuring high-linearity, low driving voltage and lowpropagation loss. However, fully integrated system requires integration of high power, low noise, and narrow linewidth lasers on TFLN chip. Here we achieve this goal, and demonstrate integrated high-power lasers on TFLN platform with up to 60 mW of optical power in the waveguides. We use this platform to realize a highpower transmitter consisting an electrically-pumped laser integrated with a 50 GHz modulator.

Programmable black phosphorus image sensor for broadband optoelectronic edge computing

Abstract: Image sensors with internal computing capability enable in-sensor computing that can significantly reduce the communication latency and power consumption for machine vision in distributed systems and robotics. Two-dimensional semiconductors are uniquely advantageous in realizing such intelligent visionary sensors because of their tunable electrical and optical properties and amenability for heterogeneous integration. Here, we report a multifunctional infrared image sensor based on an array of black phosphorous programmable phototransistors (bP-PPT). By controlling the stored charges in the gate dielectric layers electrically and optically, the bP-PPT's electrical conductance and photoresponsivity can be locally or remotely programmed with high precision to implement an in-sensor convolutional neural network (CNN). The sensor array can receive optical images transmitted over a broad spectral range in the infrared and perform inference computation to process and recognize the images with 92% accuracy. The demonstrated multispectral infrared imaging and in-sensor computing with the black phosphorous optoelectronic sensor array can be scaled up to build a more complex visionary neural network, which will find many promising applications for distributed and remote multispectral sensing.

Sound Trapping in an Open Resonator

Abstract: The ability of extreme sound energy confinement with high-quality factor (Q-factor) resonance is of vital importance for acoustic devices requiring high intensity and hypersensitivity in biological ultrasonics, enhanced collimated sound emission (i.e. sound laser) and high-resolution sensing. However, structures reported so far demonstrated a limited quality factor (Q-factor) of acoustic resonances, up to several tens in an open resonator. The emergence of bound states in the continuum (BIC) makes it possible to realize high-Q factor acoustic modes. Here, we report the theoretical design and experimental demonstration of acoustic BICs supported by a single open resonator. We predicted that such an open acoustic resonator could simultaneously support three types of BICs, including symmetry protected BIC, Friedrich-Wintgen BIC induced by mode interference, as well as a new kind of BIC: mirror-symmetry induced BIC. We also experimentally demonstrated the existence of all three types of BIC with Q-factor up to one order of magnitude greater than the highest Q-factor reported in an open resonator.

Synthetic Control over the Binding Configuration of Luminescent sp3-Defects in Single-Walled Carbon Nanotubes

Abstract: The controlled functionalization of single-walled carbon nanotubes with luminescent sp3-defects has created the potential to employ them as quantum-light sources in the near-infrared. For that, it is crucial to control their spectral diversity. The emission wavelength is determined by the binding configuration of the defects rather than the molecular structure of the attached groups. However, current functionalization methods produce a variety of binding configurations and thus emission wavelengths. We introduce a simple reaction protocol for the creation of only one type of luminescent defect in polymer-sorted (6,5) nanotubes, which is more red-shifted and exhibits longer photoluminescence lifetimes than the commonly obtained binding configurations. We demonstrate single-photon emission at room temperature and expand this functionalization to other polymer-wrapped nanotubes with emission further in the near-infrared. As the selectivity of the reaction with various aniline derivatives depends on the presence of an organic base we propose nucleophilic addition as the reaction mechanism.

Monolithic Infrared Silicon Photonics: The Rise of (Si)GeSn Semiconductors

Abstract: (Si)GeSn semiconductors are finally coming of age after a long gestation period. The demonstration of device quality epi-layers and quantum-engineered heterostructures has meant that tunable all-group IV Si-integrated infrared photonics is now a real possibility. Notwithstanding the recent exciting developments in (Si)GeSn materials and devices, this family of semiconductors is still facing serious limitations that need to be addressed to enable reliable and scalable applications. The main outstanding challenges include the difficulty to grow high crystalline quality layers and heterostructures at the desired Sn content and lattice strain, preserve the material integrity during growth and throughout device processing steps, and control doping and defect density. Other challenges are related to the lack of optimized device designs and predictive theoretical models to evaluate and simulate the fundamental properties and performance of (Si)GeSn layers and heterostructures. This Perspective highlights key strategies to circumvent these hurdles and bring this material system to maturity to create far-reaching new opportunities for Si-compatible infrared photodetectors, sensors, and emitters for applications in free-space communication, infrared harvesting, biological and chemical sensing, and thermal imaging.

Recyclable flame-retardant epoxy composites based on disulfide bonds. Flammability and recyclability

Abstract: A series of recyclable epoxy resin (REP) composites are successfully prepared in this study, aiming to improve flame retardancy while keep good recyclability and mechanical properties. The commercial 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-Oxide (DOPO) with high reactive P-H bond is used as highly-efficient flame retardant in this work. Compared with pure epoxy resin with a limited oxygen index of 21.7 % and no rating in vertical burning test, recyclable epoxy resin only with 3 wt% DOPO acquires a limited oxygen index value of 27.8% and V-0 rating. In addition, REP composites containing 4 wt% DOPO displays quick self-extinguishing behavior, which shows the 43.5% drop of the peak heat release rate. The main reason might be that traditional phosphorous-containing flame retardant existing in REP composites can play a positive role in both condensed phase and gas phase when burning. On the other hand, both scanning electron microscopy and Raman results also further affirm the improved flame retardancy. Moreover, flame-retardant REP composites can also maintain good transparency and mechanical properties. As well as the favorable recyclability originated from the special exchangeable disulfide crosslinks. High-Performance REP composites possessing expected flame retardancy, recyclability and good mechanical properties pave the way to broaden applications of thermoset epoxy materials.

III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Abstract: Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

MoS$_{2}$ nanosheets incorporated {\alpha}-Fe$_{2}$O$_{3}$/ZnO nanocomposite with enhanced photocatalytic dye degradation and hydrogen production ability

Abstract: We have synthesized MoS$_{2}$ incorporated $\alpha$-Fe$_{2}$O$_{3}$/ZnO nanocomposites by the hydrothermal process. The effect of incorporating ultrasonically exfoliated MoS$_{2}$ on the photocatalytic performance of $\alpha$-Fe$_{2}$O$_{3}$/ZnO nanocomposites has been demonstrated. Structural, morphological and optical characteristics of the nanomaterials are investigated by performing Rietveld refinement of powder X-ray diffraction patterns, field emission scanning electron microscopy and UV-visible spectroscopy. The photoluminescence spectra of the nanocomposites show that the recombination of photogenerated electron-hole pairs is suppressed due to incorporating MoS$_{2}$ nanosheets. The ultrasonicated MoS$_{2}$ incorporated $\alpha$-Fe$_{2}$O$_{3}$/ZnO nanocomposite shows 91% and 83% efficiency to degrade RhB dye and antibiotic ciprofloxacin under solar illumination. Active species trapping experiments reveal that the hydroxyl radicals play a significant role in RhB degradation. Likewise, the dye degradation efficiency, the amount of hydrogen produced by this nanocomposite via photocatalytic water splitting is also higher as compared to non-ultrasonicated MoS$_{2}$ incorporated $\alpha$-Fe$_{2}$O$_{3}$/ZnO and $\alpha$-Fe$_{2}$O$_{3}$/ZnO nanocomposites as well as Degussa P25 titania nanoparticles. This indicates the promising potential of the incorporation of ultrasonicated MoS$_{2}$ with $\alpha$-Fe$_{2}$O$_{3}$/ZnO nanocomposite for generation of carbon-free hydrogen by water splitting. The substantial increase in the photocatalytic efficiency of $\alpha$-Fe$_{2}$O$_{3}$/ZnO after incorporation of ultrasonicated MoS$_{2}$ can be attributed to its favorable band structure, large surface to volume ratio, effective segregation and migration of photogenerated electron-hole pairs at the interface of heterojunction and the active edge sites provided by few-layer MoS$_{2}$ nanosheets.

Frequency Selective Surfaces for High Sensitivity Terahertz Sensing

Abstract: An apporach for the sensing of small amounts of chemical and biochemical material is presented. A frequency selective surface (FSS) made from asymmetric split ring resonators (aDSR) is excited with free space radiation. Due to interference effects a resonance occurs with a steep flank in the frequency response which is shifted upon dielectric loading. Utilizing a strong E-field concentration by selective loading the detection of very small amounts of probe material becomes possible. The functionality is proven by numerical simulation and the optimization of structure and loading is performed.

Surface NMR using quantum sensors in diamond.

Abstract: Characterization of the molecular properties of surfaces under ambient or chemically reactive conditions is a fundamental scientific challenge. Moreover, many traditional analytical techniques used for probing surfaces often lack dynamic or molecular selectivity, which limits their applicability for mechanistic and kinetic studies under realistic chemical conditions. Nuclear magnetic resonance spectroscopy (NMR) is a widely used technique and would be ideal for probing interfaces due to the molecular information it provides noninvasively. However, it lacks the sensitivity to probe the small number of spins at surfaces. Here, we use nitrogen vacancy (NV) centers in diamond as quantum sensors to optically detect nuclear magnetic resonance signals from chemically modified aluminum oxide surfaces, prepared with atomic layer deposition (ALD). With the surface NV-NMR technique, we are able to monitor in real-time the formation kinetics of a self assembled monolayer (SAM) based on phosphonate anchoring chemistry to the surface. This demonstrates the capability of quantum sensors as a new surface-sensitive tool with sub-monolayer sensitivity for in-situ NMR analysis with the additional advantage of a strongly reduced technical complexity.

Chiral Plasmonic Hydrogen Sensors.

Abstract: In this article, a chiral plasmonic hydrogen-sensing platform using palladium-based nanohelices is demonstrated. Such 3D chiral nanostructures fabricated by nanoglancing angle deposition exhibit strong circular dichroism both experimentally and theoretically. The chiroptical properties of the palladium nanohelices are altered upon hydrogen uptake and sensitively depend on the hydrogen concentration. Such properties are well suited for remote and spark-free hydrogen sensing in the flammable range. Hysteresis is reduced, when an increasing amount of gold is utilized in the palladium-gold hybrid helices. As a result, the linearity of the circular dichroism in response to hydrogen is significantly improved. The chiral plasmonic sensor scheme is of potential interest for hydrogen-sensing applications, where good linearity and high sensitivity are required.

Intelligent Meta-Imagers: From Compressed to Learned Sensing

Abstract: Computational meta-imagers synergize metamaterial hardware with advanced signal processing approaches such as compressed sensing. Recent advances in artificial intelligence (AI) are gradually reshaping the landscape of meta-imaging. Most recent works use AI for data analysis, but some also use it to program the physical meta-hardware. The role of "intelligence" in the measurement process and its implications for critical metrics like latency are often not immediately clear. Here, we comprehensively review the evolution of computational meta-imaging from the earliest frequency-diverse compressive systems to modern programmable intelligent meta-imagers. We introduce a clear taxonomy in terms of the flow of task-relevant information that has direct links to information theory: compressive meta-imagers indiscriminately acquire all scene information in a task-agnostic measurement process that aims at a near-isometric embedding; intelligent meta-imagers highlight task-relevant information in a task-aware measurement process that is purposefully non-isometric. We provide explicit design tutorials for the integration of programmable meta-atoms as trainable physical weights into an intelligent end-to-end sensing pipeline. This merging of the physical world of metamaterial engineering and the digital world of AI enables the remarkable latency gains of intelligent meta-imagers. We further outline emerging opportunities for cognitive meta-imagers with reverberation-enhanced resolution and we point out how the meta-imaging community can reap recent advances in the vibrant field of metamaterial wave processors to reach the holy grail of low-energy ultra-fast all-analog intelligent meta-sensors.

Underwater metamaterial absorber with impedance-matched composite

Abstract: By using a structured tungsten-polyurethane composite that is impedance-matched to water while simultaneously having a much slower longitudinal sound speed, we have theoretically designed, and experimentally realized, an underwater acoustic absorber exhibiting high absorption from 4 to 20 kHz, measured in a 5.6m times 3.6m water pool with the time-domain approach. The broadband functionality is achieved by optimally engineering the distribution of the Fabry-Perot resonances, based on an integration scheme, to attain impedance matching over a broad frequency range. The average thickness of the integrated absorber, 8.9 mm, is in the deep subwavelength regime (~{\lambda}/42 at 4 kHz) and close to the causal minimum thickness of 8.2 mm that is evaluated from the simulated absorption spectrum. The structured composite represents a new type of acoustic metamaterials that has high acoustic energy density and promises broad underwater applications.

A rotary plasmonic nanoclock

Abstract: One of the fundamental challenges in nanophotonics is to gain full control over nanoscale optical elements. The precise spatiotemporal arrangement determines their interactions and collective behavior. To this end, DNA nanotechnology is employed as an unprecedented tool to create nanophotonic devices with excellent spatial addressability and temporal programmability. However, most of the current DNA-assembled nanophotonic devices can only reconfigure among random or very few defined states. Here, we demonstrate a DNA-assembled rotary plasmonic nanoclock. In this system, a rotor gold nanorod can carry out directional and reversible 360 degree rotation with respect to a stator gold nanorod, transitioning among 16 well-defined configurations powered by DNA fuels. The full-turn rotation process is monitored by optical spectroscopy in real time. We further demonstrate autonomous rotation of the plasmonic nanoclock powered by DNAzyme-RNA interactions. Such assembly approaches pave a viable route towards advanced nanophotonic systems entirely from the bottom-up.

Flexural wave energy harvesting by the topological interface state of a phononic crystal beam

Abstract: In this study, we design the 3D-printed phononic crystal (PnC) beam with the topological interface state for harvesting the mechanical energy of flexural waves. The PnC beam is formed by arranging periodic grooves on its surface. The PnC beam with either topologically trivial or non-trivial phase can be achieved via changing the distance between the grooves. The topological interface state is then generated by combining two PnCs with distinct topological phases. The existence of the interface state of the PnC beam is verified both numerically and experimentally. To convert the mechanical energy into the electricity, a piezoelectric disc is attached at the interface of the proposed PnC beam. Compared to the reference beam harvester, the measured output power is significantly amplified by the PnC harvester at the frequency corresponding to the interface state. Furthermore, the PnC beam energy harvester based on the topological state exhibits robustness against geometrical disorders.

Polarization and resistive switching in epitaxial 2 nm Hf$_{0.5}$Zr$_{0.5}$O$_2$ tunnel junctions

Abstract: In the quest for reliable and power-efficient memristive devices, ferroelectric tunnel junctions are being investigated as potential candidates. CMOS-compatible ferroelectric hafnium oxides are at the forefront. However, in epitaxial tunnel devices with thicknesses around ${\approx}$ 4 - 6 nm, the relatively high tunnel energy barrier produces a large resistance that challenges their implementation. Here, we show that ferroelectric and electroresistive switching can be observed in ultrathin 2 nm epitaxial Hf$_{0.5}$Zr$_{0.5}$O$_2$ (HZO) tunnel junctions in large area capacitors (${\approx} 300{\mu}m^2$). We observe that the resistance area product is reduced to about 160 ${\Omega}{\cdot}$cm$^2$ and 65 ${\Omega}{\cdot}$cm$^2$ for OFF and ON resistance states, respectively. These values are two orders of magnitude smaller than those obtained in equivalent 5 nm HZO tunnel devices while preserving a similar OFF/ON resistance ratio (210 ${\%}$). The devices show memristive and spike-timing-dependent plasticity (STDP) behavior and good retention. Electroresistance and ferroelectric loops closely coincide, signaling ferroelectric switching as a driving mechanism for resistance change.

Ionic Sieving Through One-Atom-Thick 2D Material Enables Analog Nonvolatile Memory for Neuromorphic Computing.

Abstract: The first report on ion transport through atomic sieves of atomically-thin 2D material is provided to solve critical limitations of electrochemical random-access memory (ECRAM) devices.

Experimental demonstration of a mmWave passive access point extender based on a binary reconfigurable intelligent surface.

Abstract: As data rates demands are exploding, 5G will soon rely on mmWaves that offer much higher bandwidths. Yet at these frequencies, attenuation and diffraction of waves require point to point communications with beamforming base stations that are complex and power greedy. Furthermore, since any obstacle at these frequencies completely blocks the waves, the networks must be extremely dense, resulting in dramatic increase of its cost. One way to avoid this problem is to redirect beams coming from base stations at many locations with Reconfigurable Intelligent Surfaces, in order to increase their coverage even in cluttered environments. Here we describe and experimentally demonstrate a binary tunable metasurface operating at 28~GHz, based on standard PCB and off the shelves PIN diodes. We show that it can be used as a Reconfigurable Intelligent Surface that beamforms an incoming plane wave at a given angle to one or several outgoing plane waves at angles reconfigurable in real time. Most importantly we use this 20~cm$\times$20~cm reconfigurable Intelligent Surface alongside software defined radio and up/down converters at 28~GHz, and demonstrate a wireless link between an emitter and a receiver 10~meters away, in a non line of sight configuration, hence proving the validity of the approach.

Impact of Semiconductor Band Tails and Band Filling on Photovoltaic Efficiency Limits

Abstract: The theoretical maximum efficiency of a solar cell is typically characterized by a detailed balance of optical absorption and emission for a semiconductor in the limit of unity radiative efficiency and an ideal step-function response for the density of states and absorbance at the semiconductor band edges, known as the Shockley-Queisser limit. However, real materials have non-abrupt band edges, which are typically characterized by an exponential distribution of states, known as an Urbach tail. We develop here a modified detailed balance limit of solar cells with imperfect band edges, using optoelectronic reciprocity relations. We find that for semiconductors whose band edges are broader than the thermal energy, kT, there is an effective renormalized bandgap given by the quasi-Fermi level splitting within the solar cell. This renormalized bandgap creates a Stokes shift between the onset of the absorption and photoluminescence emission energies, which significantly reduces the maximum achievable efficiency. The abruptness of the band edge density of states therefore has important implications for the maximum achievable photovoltaic efficiency.

Giant and bidirectionally tunable thermopower in non-aqueous ionogels enabled by selective ion doping

Abstract: Ionic thermoelectrics show great potential in low-grade heat harvesting and thermal sensing owing to their ultrahigh thermopower, low cost and ease in production. However, the lack of effective n-type ionic thermoelectric materials seriously hinders their applications. Here, we report giant and bidirectionally tunable thermopowers within an ultrawide range from -23 to +32 mV K-1 at 90% RH in solid ionic-liquid-based ionogels, rendering it among the best n- and p-type ionic thermoelectric materials. A novel thermopower regulation strategy through ion doping to selectively induce ion aggregates via strong ion-ion interactions is proposed. These charged aggregates are found decisive in modulating the sign and enlarging the magnitude of the thermopower in the ionogels. A prototype wearable device integrated with 12 p-n pairs is demonstrated with a total thermopower of 0.358 V K-1 in general indoor conditions, showing promise for ultrasensitive body heat detection.

Electrical Control of Surface Acoustic Waves

Abstract: Acoustic waves at microwave frequencies have been widely used in signal processing applications. They are also emerging as a promising approach for communication and manipulation of quantum information. However, dynamic control of acoustic waves in a low-loss and scalable manner remains an outstanding challenge, which hinders the development of phononic integrated circuits. Here we demonstrate electrical control of traveling acoustic waves on an integrated lithium niobate platform at both room and cryogenic temperatures. We electrically tune the material elasticity to modulate the phase and amplitude of the acoustic waves and demonstrate an acoustic frequency shifter by serrodyne phase modulation. Furthermore, we show reconfigurable nonreciprocal modulation by tailoring the phase matching between acoustic and quasi-traveling electric fields. Our scalable electro-acoustic platform comprises the fundamental elements for arbitrary acoustic signal processing and manipulation of phononic quantum information.