Showing papers in "arXiv: Fluid Dynamics in 2020"
TL;DR: A model is developed that tries to explain and describe the temperature and relative humidity sensitivity of respiratory droplets and their possible connection in determining viral outbreaks, and determines the droplet evaporation time that determines the infection rate constant.
Abstract: One of the many unresolved questions that revolves around the Covid-19 pandemic is whether local outbreaks can depend on ambient conditions like temperature and relative humidity. In this paper, we develop a model that tries to explain and describe the temperature and relative humidity sensitivity of respiratory droplets and their possible connection in determining viral outbreaks. The model has two parts. First, we model the growth rate of the infected population based on a reaction mechanism - the final equations of which are similar to the well-known SIR model. The advantage of modeling the pandemic using the reaction mechanism is that the rate constants have sound physical interpretation. The infection rate constant is derived using collision rate theory and shown to be a function of the respiratory droplet lifetime. In the second part, we have emulated the respiratory droplets responsible for disease transmission as salt solution droplets and computed their evaporation time accounting for droplet cooling, heat and mass transfer and finally crystallization of the salt. The model output favourably compares with the experimentally obtained evaporation characteristics of levitated droplets of pure water and salt solution, respectively, ensuring fidelity of the model. Droplet evaporation/desiccation time is indeed dependent on ambient temperature and relative humidity, considered at both outdoor and indoor conditions. Since the droplet evaporation time determines the infection rate constant, ambient temperature and relative humidity are shown to impact the outbreak growth rates.
137 citations
Posted Content•
TL;DR: In this article, the authors provided research findings on the physics of aerosol dispersion relevant to the hypothesized aerosol transmission of SARS-CoV-2, and used physics-based modeling at different levels of complexity, and literature on coronavirus, to investigate the possibility of airborne transmission.
Abstract: We provide research findings on the physics of aerosol dispersion relevant to the hypothesized aerosol transmission of SARS-CoV-2. We utilize physics-based modeling at different levels of complexity, and literature on coronaviruses, to investigate the possibility of airborne transmission. The previous literature, our 0D-3D simulations by various physics-based models, and theoretical calculations, indicate that the typical size range of speech and cough originated droplets (d < 20microns) allows lingering in the air for O(1h) so that they could be inhaled. Consistent with the previous literature, numerical evidence on the rapid drying process of even large droplets, up to sizes O(100microns), into droplet nuclei/aerosols is provided. Based on the literature and the public media sources, we provide evidence that the infected individuals could have been exposed to aerosols/droplet nuclei by inhaling them in significant numbers e.g. O(100). By 3D computational fluid dynamics (CFD) simulations, we give examples on the transport and dilution of aerosols (d<20microns) over distances O(10m) in generic environments. We study susceptible and infected individuals in generic public places by Monte-Carlo modeling. The model accounts for the locally varying aerosol concentration levels which the susceptible accumulate via inhalation. The introduced concept, 'exposure time' to virus containing aerosols is proposed to complement the traditional 'safety distance' thinking. We show that the exposure time to inhale O(100) aerosols could range from O(1s) to O(1min) or even to O(1h) depending on the situation. The Monte Carlo analysis provides clear quantitative insight to the exposure time in different public indoor environments.
122 citations
TL;DR: In this article, the basic equations that govern fluid behaviour in the continuum limit are presented, and the authors show how these equations break down and new properties emerge in molecular scale confinement.
Abstract: Nanofluidics has firmly established itself as a new field in fluid mechanics, as novel properties have been shown to emerge in fluids at the nanometric scale. Thanks to recent developments in fabrication technology, artificial nanofluidic systems are now being designed at the scale of biological nanopores. This ultimate step in scale reduction has pushed the development of new experimental techniques and new theoretical tools, bridging fluid mechanics, statistical mechanics and condensed matter physics. This review is intended as a toolbox for fluids at the nanometre scale. After presenting the basic equations that govern fluid behaviour in the continuum limit, we will show how these equations break down and new properties emerge in molecular scale confinement.
119 citations
TL;DR: In-air microfluidics as mentioned in this paper is a chip-free platform to manipulate microscale liquid streams in the air, which can be used for additive manufacturing of 3D modular constructs with tailored micro-environments for multiple cell types.
Abstract: Microfluidic chips provide unparalleled control over droplets and jets, which have advanced all natural sciences. However, microfluidic applications could be vastly expanded by increasing the per-channel throughput and directly exploiting the output of chips for rapid additive manufacturing. We unlock these features with in-air microfluidics, a new chip-free platform to manipulate microscale liquid streams in the air. By controlling the composition and in-air impact of liquid microjets by surface tension-driven encapsulation, we fabricate monodisperse emulsions, particles, and fibers with diameters of 20 to 300um at rates that are 10 to 100 times higher than chip-based droplet microfluidics. Furthermore, in-air microfluidics uniquely enables module-based production of three-dimensional (3D) multiscale (bio)materials in one step because droplets are partially solidified in-flight and can immediately be printed onto a substrate. In-air microfluidics is cytocompatible, as demonstrated by additive manufacturing of 3D modular constructs with tailored micro-environments for multiple cell types. Its in-line control, high throughput and resolution, and cytocompatibility make in-air microfluidics a versatile platform technology for science, industry, and health care.
106 citations
TL;DR: In this paper, an encoding using convolutional autoencoders (CAEs) followed by a reduced-space time evolution by recurrent neural networks overcomes the limitation of truncation by discarding important interactions between higher-order modes during time evolution.
Abstract: A common strategy for the dimensionality reduction of nonlinear partial differential equations relies on the use of the proper orthogonal decomposition (POD) to identify a reduced subspace and the Galerkin projection for evolving dynamics in this reduced space. However, advection-dominated PDEs are represented poorly by this methodology since the process of truncation discards important interactions between higher-order modes during time evolution. In this study, we demonstrate that an encoding using convolutional autoencoders (CAEs) followed by a reduced-space time evolution by recurrent neural networks overcomes this limitation effectively. We demonstrate that a truncated system of only two latent-space dimensions can reproduce a sharp advecting shock profile for the viscous Burgers equation with very low viscosities, and a six-dimensional latent space can recreate the evolution of the inviscid shallow water equations. Additionally, the proposed framework is extended to a parametric reduced-order model by directly embedding parametric information into the latent space to detect trends in system evolution. Our results show that these advection-dominated systems are more amenable to low-dimensional encoding and time evolution by a CAE and recurrent neural network combination than the POD Galerkin technique.
98 citations
TL;DR: The present model reconstructs high-resolved turbulent flows from very coarse input data in space, and also reproduces the temporal evolution for appropriately chosen time interval, suggesting that the present method can perform a range of flow reconstructions in support of computational and experimental efforts.
Abstract: We present a new turbulent data reconstruction method with supervised machine learning techniques inspired by super resolution and inbetweening, which can recover high-resolution turbulent flows from grossly coarse flow data in space and time. For the present machine learning based data reconstruction, we use the downsampled skip-connection/multi-scale model based on a convolutional neural network to incorporate the multi-scale nature of fluid flows into its network structure. As an initial example, the model is applied to a two-dimensional cylinder wake at $Re_D$ = 100. The reconstructed flow fields by the proposed method show great agreement with the reference data obtained by direct numerical simulation. Next, we examine the capability of the proposed model for a two-dimensional decaying homogeneous isotropic turbulence. The machine-learned models can follow the decaying evolution from coarse input data in space and time, according to the assessment with the turbulence statistics. The proposed concept is further investigated for a complex turbulent channel flow over a three-dimensional domain at $Re_{\tau}$ =180. The present model can reconstruct high-resolved turbulent flows from very coarse input data in space, and it can also reproduce the temporal evolution when the time interval is appropriately chosen. The dependence on the amount of training snapshots and duration between the first and last frames based on a temporal two-point correlation coefficient are also assessed to reveal the capability and robustness of spatio-temporal super resolution reconstruction. These results suggest that the present method can meet a range of flow reconstructions for supporting computational and experimental efforts.
86 citations
Posted Content•
TL;DR: The neural network solver methodology, the SimNet architecture, and the various features that are needed for effective solution of the PDEs are reviewed.
Abstract: We present SimNet, an AI-driven multi-physics simulation framework, to accelerate simulations across a wide range of disciplines in science and engineering. Compared to traditional numerical solvers, SimNet addresses a wide range of use cases - coupled forward simulations without any training data, inverse and data assimilation problems. SimNet offers fast turnaround time by enabling parameterized system representation that solves for multiple configurations simultaneously, as opposed to the traditional solvers that solve for one configuration at a time. SimNet is integrated with parameterized constructive solid geometry as well as STL modules to generate point clouds. Furthermore, it is customizable with APIs that enable user extensions to geometry, physics and network architecture. It has advanced network architectures that are optimized for high-performance GPU computing, and offers scalable performance for multi-GPU and multi-Node implementation with accelerated linear algebra as well as FP32, FP64 and TF32 computations. In this paper we review the neural network solver methodology, the SimNet architecture, and the various features that are needed for effective solution of the PDEs. We present real-world use cases that range from challenging forward multi-physics simulations with turbulence and complex 3D geometries, to industrial design optimization and inverse problems that are not addressed efficiently by the traditional solvers. Extensive comparisons of SimNet results with open source and commercial solvers show good correlation.
86 citations
Posted Content•
TL;DR: Two models based on convolutional neural networks are trained to predict the two-dimensional instantaneous velocity-fluctuation fields at different wall-normal locations in a turbulent open-channel flow, using the wall-shear-stress components and the wall pressure as inputs, showing better predictions than the extended proper orthogonal decomposition (EPOD), which establishes a linear relation between the input and output fields.
Abstract: Two models based on convolutional neural networks are trained to predict the two-dimensional velocity-fluctuation fields at different wall-normal locations in a turbulent open channel flow, using the wall-shear-stress components and the wall pressure as inputs The first model is a fully-convolutional neural network (FCN) which directly predicts the fluctuations, while the second one reconstructs the flow fields using a linear combination of orthonormal basis functions, obtained through proper orthogonal decomposition (POD), hence named FCN-POD Both models are trained using data from two direct numerical simulations (DNS) at friction Reynolds numbers $Re_{\tau} = 180$ and $550$ Thanks to their ability to predict the nonlinear interactions in the flow, both models show a better prediction performance than the extended proper orthogonal decomposition (EPOD), which establishes a linear relation between input and output fields The performance of the various models is compared based on predictions of the instantaneous fluctuation fields, turbulence statistics and power-spectral densities The FCN exhibits the best predictions closer to the wall, whereas the FCN-POD model provides better predictions at larger wall-normal distances We also assessed the feasibility of performing transfer learning for the FCN model, using the weights from $Re_{\tau}=180$ to initialize those of the $Re_{\tau}=550$ case Our results indicate that it is possible to obtain a performance similar to that of the reference model up to $y^{+}=50$, with $50\%$ and $25\%$ of the original training data These non-intrusive sensing models will play an important role in applications related to closed-loop control of wall-bounded turbulence
78 citations
TL;DR: An unsupervised learning model that adopts a cycle-consistent generative adversarial network (CycleGAN) that can be trained with unpaired turbulence data for super-resolution reconstruction of turbulent fields is presented.
Abstract: Recent attempts to use deep learning for super-resolution reconstruction of turbulent flows have used supervised learning, which requires paired data for training. This limitation hinders more practical applications of super-resolution reconstruction. Therefore, we present an unsupervised learning model that adopts a cycle-consistent generative adversarial network that can be trained with unpaired turbulence data for super-resolution reconstruction. Our model is validated using three examples: (i) recovering the original flow field from filtered data using direct numerical simulation (DNS) of homogeneous isotropic turbulence; (ii) reconstructing full-resolution fields using partially measured data from the DNS of turbulent channel flows; and (iii) generating a DNS-resolution flow field from large eddy simulation (LES) data for turbulent channel flows. In examples (i) and (ii), for which paired data are available for supervised learning, our unsupervised model demonstrates qualitatively and quantitatively similar performance as that of the best supervised-learning model. More importantly, in example (iii), where supervised learning is impossible, our model successfully reconstructs the high-resolution flow field of statistical DNS quality from the LES data. This demonstrates that unsupervised learning of turbulence data is indeed possible, opening a new door for the wide application of super-resolution reconstruction of turbulent fields.
76 citations
TL;DR: This work presents a novel physics-informed DL-based SR solution using convolutional neural networks (CNN), which is able to produce HR flow fields from low-resolution (LR) inputs in high-dimensional parameter space by leveraging the conservation laws and boundary conditions of fluid flows.
Abstract: High-resolution (HR) information of fluid flows, although preferable, is usually less accessible due to limited computational or experimental resources. In many cases, fluid data are generally sparse, incomplete, and possibly noisy. How to enhance spatial resolution and decrease the noise level of flow data is essential and practically useful. Deep learning (DL) techniques have been demonstrated to be effective for super-resolution (SR) tasks, which, however, primarily rely on sufficient HR labels for training. In this work, we present a novel physics-informed DL-based SR solution using convolutional neural networks (CNN), which is able to produce HR flow fields from low-resolution (LR) inputs in high-dimensional parameter space. By leveraging the conservation laws and boundary conditions of fluid flows, the CNN-SR model is trained without any HR labels. Moreover, the proposed CNN-SR solution unifies the forward SR and inverse data assimilation for the scenarios where the physics is partially known, e.g., unknown boundary conditions. Several flow SR problems relevant to cardiovascular applications have been studied to demonstrate the proposed method's effectiveness and merit. Both Gaussian and non-Gaussian MRI noises are investigated to illustrate the denoising capability.
73 citations
Posted Content•
TL;DR: This work analyzes flows during breathing and speaking, including phonetic features, using orders-of-magnitude estimates, numerical simulations, and laboratory experiments to quantify how exhaled air is transported in speech, and documents the spatiotemporal structure of the expelled airflow.
Abstract: Many scientific reports document that asymptomatic and presymptomatic individuals contribute to the spread of COVID-19, probably during conversations in social interactions. Droplet emission occurs during speech, yet few studies document the flow to provide the transport mechanism. This lack of understanding prevents informed public health guidance for risk reduction and mitigation strategies, e.g. the "six-foot rule". Here we analyze flows during breathing and speaking, including phonetic features, using order-of-magnitudes estimates, numerical simulations, and laboratory experiments. We document the spatio-temporal structure of the expelled air flow. Phonetic characteristics of plosive sounds like 'P' lead to enhanced directed transport, including jet-like flows that entrain the surrounding air. We highlight three distinct temporal scaling laws for the transport distance of exhaled material including (i) transport over a short distance ($<$ 0.5 m) in a fraction of a second, with large angular variations due to the complexity of speech, (ii) a longer distance, approximately 1 m, where directed transport is driven by individual vortical puffs corresponding to plosive sounds, and (iii) a distance out to about 2 m, or even further, where sequential plosives in a sentence, corresponding effectively to a train of puffs, create conical, jet-like flows. The latter dictates the long-time transport in a conversation. We believe that this work will inform thinking about the role of ventilation, aerosol transport in disease transmission for humans and other animals, and yield a better understanding of linguistic aerodynamics, i.e., aerophonetics.
TL;DR: A review and perspectives on recent developments in the use of machine learning (ML) to augment Reynolds-averaged Navier-Stokes (RANS) and Large Eddy Simulation (LES) models of turbulent flows is presented in this article.
Abstract: This work presents a review and perspectives on recent developments in the use of machine learning (ML) to augment Reynolds-averaged Navier--Stokes (RANS) and Large Eddy Simulation (LES) models of turbulent flows. Different approaches of applying supervised learning to represent unclosed terms, model discrepancies and sub-filter scales are discussed in the context of RANS and LES modeling. Particular emphasis is placed on the impact of the training procedure on the consistency of ML augmentations with the underlying physical model. Techniques to promote model-consistent training, and to avoid the requirement of full fields of direct numerical simulation data are detailed. This is followed by a discussion of physics-informed and mathematical considerations on the choice of the feature space, and imposition of constraints on the ML model. With a view towards developing generalizable ML-augmented RANS and LES models, outstanding challenges are discussed, and perspectives are provided. While the promise of ML-augmented turbulence modeling is clear, and successes have been demonstrated in isolated scenarios, a general consensus of this paper is that truly generalizable models require model-consistent training with careful characterization of underlying assumptions and imposition of physically and mathematically informed priors and constraints to account for the inevitable shortage of data relevant to predictions of interest. Thus, machine learning should be viewed as one tool in the turbulence modeler's toolkit. This modeling endeavor requires multi-disciplinary advances, and thus the target audience for this paper is the fluid mechanics community, as well as the computational science and machine learning communities.
TL;DR: In this paper, a machine-learned reduced order model (ML-ROM) is constructed by combining a convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM), which are trained in a sequential manner.
Abstract: We propose a method to construct a reduced order model with machine learning for unsteady flows. The present machine-learned reduced order model (ML-ROM) is constructed by combining a convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM), which are trained in a sequential manner. First, the CNN-AE is trained using direct numerical simulation (DNS) data so as to map the high-dimensional flow data into low-dimensional latent space. Then, the LSTM is utilized to establish a temporal prediction system for the low-dimensionalized vectors obtained by CNN-AE. As a test case, we consider flows around a bluff body whose shape is defined using a combination of trigonometric functions with random amplitudes. The present ML-ROMs are trained on a set of 80 bluff body shapes and tested on a different set of 20 bluff body shapes not used for training, with both training and test shapes chosen from the same random distribution. The flow fields are confirmed to be well reproduced by the present ML-ROM in terms of various statistics. We also focus on the influence of two main parameters: (1) the latent vector size in the CNN-AE, and (2) the time step size between the mapped vectors used for the LSTM. The present results show that the ML-ROM works well even for unseen shapes of bluff bodies when these parameters are properly chosen, which implies great potential for the present type of ML-ROM to be applied to more complex flows
TL;DR: In this paper, a combined experimental and numerical analysis was performed to identify transmission mechanisms on an urban bus and assess strategies to reduce risk of SARS-CoV-2 (COVID-19) transmission.
Abstract: Airborne respiratory diseases such as SARS-CoV-2 (COVID-19) pose significant challenges for public transportation. Several recent outbreaks of SARS-CoV-2 indicate the high risk of transmission among passengers on public buses if special precautions are not taken. This study presents a combined experimental and numerical analysis to identify transmission mechanisms on an urban bus and assess strategies to reduce risk. The effects of the ventilation and air-conditioning systems, opening windows and doors, and wearing masks are analyzed. Specific attention is made to the transport of sub-micron and micron-size particles relevant to typical respiratory droplets. High-resolution instrumentation was used to measure size distribution and aerosol response time on a University of Michigan campus bus under these different conditions. Computational fluid dynamics was employed to measure the airflow within the bus and evaluate risk. A risk metric was adopted based on the number of particles exposed to susceptible passengers. The flow that carries these aerosols is predominantly controlled by the ventilation system, which acts to uniformly distribute the aerosol concentration throughout the bus while simultaneously diluting it with fresh air. The opening of doors and windows was found to reduce the concentration by approximately one half, albeit its benefit does not uniformly impact all passengers on the bus due to recirculation of airflow caused by entrainment through windows. Finally, it was found that well fitted surgical masks, when worn by both infected and susceptible passengers, can nearly eliminate the transmission of the disease.
TL;DR: In this paper, a model for quasi-two-dimensional MHD flows between two planes with small magnetic Reynolds number and constant transverse magnetic field orthogonal to the planes is presented.
Abstract: This paper presents a model for quasi two-dimensional MHD flows between two planes with small magnetic Reynolds number and constant transverse magnetic field orthogonal to the planes. A method is presented that allows to take 3D effects into account in a 2D equation of motion thanks to a model for the transverse velocity profile. The latter is obtained by using a double perturbation asymptotic development both in the core flow and in the Hartmann layers arising along the planes. A new model is thus built that describes inertial effects in these two regions. Two separate classes of phenomena are thus pointed out : the one related to inertial effects in the Hartmann layer gives a model for recirculating flows and the other introduces the possibility of having a transverse dependence of the velocity profile in the core flow. The ''recirculating'' velocity profile is then introduced in the transversally averaged equation of motion in order to provide an effective 2D equation of motion. Analytical solutions of this model are obtained for two experimental configurations : isolated vortices aroused by a point electrode and axisymmetric parallel layers occurring in the MATUR (MAgneticTURbulence) experiment. The theory is found to give a satisfactory agreement with the experiment so that it can be concluded that recirculating flows are actually responsible for both vortices core spreading and excessive dissipative behavior of the axisymmetric side wall layers.
TL;DR: It is shown that the DRL controller is able to significantly reduce the lift and drag fluctuations and to actively reduce the drag by approximately 5.7%, at $Re$=100, 200, 300, and 400 respectively.
Abstract: This paper focuses on the active flow control of a computational fluid dynamics simulation over a range of Reynolds numbers using deep reinforcement learning (DRL). More precisely, the proximal policy optimization (PPO) method is used to control the mass flow rate of four synthetic jets symmetrically located on the upper and lower sides of a cylinder immersed in a two-dimensional flow domain. The learning environment supports four flow configurations with Reynolds numbers 100, 200, 300 and 400, respectively. A new smoothing interpolation function is proposed to help the PPO algorithm to learn to set continuous actions, which is of great importance to effectively suppress problematic jumps in lift and allow a better convergence for the training process. It is shown that the DRL controller is able to significantly reduce the lift and drag fluctuations and to actively reduce the drag by approximately 5.7%, 21.6%, 32.7%, and 38.7%, at $Re$=100, 200, 300, and 400 respectively. More importantly, it can also effectively reduce drag for any previously unseen value of the Reynolds number between 60 and 400. This highlights the generalization ability of deep neural networks and is an important milestone to active flow control.
TL;DR: In this paper, the authors investigated the applicability of machine learning based reduced order model (ML-ROM) to three-dimensional complex flows by combining a 3D convolutional neural network autoencoder and a long short-term memory (LSTM).
Abstract: We investigate the applicability of machine learning based reduced order model (ML-ROM) to three-dimensional complex flows. As an example, we consider a turbulent channel flow at the friction Reynolds number of $Re_\tau=110$ in a minimum domain which can maintain coherent structures of turbulence. Training data set are prepared by direct numerical simulation (DNS). The present ML-ROM is constructed by combining a three-dimensional convolutional neural network autoencoder (CNN-AE) and a long short-term memory (LSTM). The CNN-AE works to map high-dimensional flow fields into a low-dimensional latent space. The LSTM is then utilized to predict a temporal evolution of the latent vectors obtained by the CNN-AE. The combination of CNN-AE and LSTM can represent the spatio-temporal high-dimensional dynamics of flow fields by only integrating the temporal evolution of the low-dimensional latent dynamics. The turbulent flow fields reproduced by the present ML-ROM show statistical agreement with the reference DNS data in time-ensemble sense, which can also be found through an orbit-based analysis. Influences of the population of vortical structures contained in the domain and the time interval used for temporal prediction on the ML- ROM performance are also investigated. The potential and limitation of the present ML-ROM for turbulence analysis are discussed at the end of our presentation.
TL;DR: In this paper, deconvolutional artificial neural network (DANN) models are developed for subgrid-scale (SGS) stress in large eddy simulation (LES) of turbulence, where the filtered velocities at different spatial points are used as input features of the DANN models to reconstruct the unfiltered velocity.
Abstract: Deconvolutional artificial neural network (DANN) models are developed for subgrid-scale (SGS) stress in large eddy simulation (LES) of turbulence. The filtered velocities at different spatial points are used as input features of the DANN models to reconstruct the unfiltered velocity. The grid width of the DANN models is chosen to be smaller than the filter width, in order to accurately model the effects of SGS dynamics. The DANN models can predict the SGS stress more accurately than the conventional approximate deconvolution method (ADM) and velocity gradient model (VGM) in a prior study: the correlation coefficients can be made larger than 99\% and the relative errors can be made less than 15\% for the DANN model. In an a posteriori study, a comprehensive comparison of the DANN model, the implicit large eddy simulation (ILES), the dynamic Smagorinsky model (DSM), and the dynamic mixed model (DMM) shows that: the DANN model is superior to the ILES, DSM, and DMM models in the prediction of the velocity spectrum, various statistics of velocity and the instantaneous coherent structures without increasing the considerable computational cost. Besides, the trained DANN models without any fine-tuning can predict the velocity statistics well for different filter widths. These results indicate that the DANN framework with consideration of SGS spatial features is a promising approach to develop advanced SGS models in the LES of turbulence.
TL;DR: In this paper, the authors used reinforcement learning (DRLSTM) to perform active flow control in strong turbulent flows, and achieved a remarkable drag reduction of around 30% in a circular cylinder, accompanied by elongation of the recirculation bubble and reduction of turbulent fluctuations in the cylinder wake.
Abstract: Machine learning has recently become a promising technique in fluid mechanics, especially for active flow control (AFC) applications. A recent work [J. Fluid Mech. (2019), vol. 865, pp. 281-302] has demonstrated the feasibility and effectiveness of deep reinforcement learning (DRL) in performing AFC over a circular cylinder at $Re = 100$, i.e., in the laminar flow regime. As a follow-up study, we investigate the same AFC problem at an intermediate Reynolds number, i.e., $Re = 1000$, where the turbulence in the flow poses great challenges to the control. The results show that the DRL agent can still find effective control strategies, but requires much more episodes in the learning. A remarkable drag reduction of around $30\%$ is achieved, which is accompanied by elongation of the recirculation bubble and reduction of turbulent fluctuations in the cylinder wake. To our best knowledge, this study is the first successful application of DRL to AFC in weak turbulent conditions. It therefore sets a new milestone in progressing towards AFC in strong turbulent flows.
TL;DR: This work demonstrates equivalent performance to that of modern NNs but with the added benefits of interpretability, increased ease-of-use and dissemination, and robustness to sparse training datasets.
Abstract: A data-driven framework for formulation of closures of the Reynolds-Average Navier--Stokes (RANS) equations is presented. In recent years, the scientific community has turned to machine learning techniques to distill a wealth of highly resolved data into improved RANS closures. While the body of work in this area has primarily leveraged Neural Networks (NNs), we alternately leverage a sparse regression framework. This methodology has two important properties: (1) The resultant model is in a closed, algebraic form, allowing for direct physical inferences to be drawn and naive integration into existing computational fluid dynamics solvers, and (2) Galilean invariance can be guaranteed by thoughtful tailoring of the feature space. Our approach is demonstrated for two classes of flows: homogeneous free shear turbulence and turbulent flow over a wavy wall. This work demonstrates equivalent performance to that of modern NNs but with the added benefits of interpretability, increased ease-of-use and dissemination, and robustness to sparse training datasets.
TL;DR: In this paper, an autoencoder network is used for nonlinear dimension reduction and feature extraction as an alternative for singular value decomposition (SVD) then the extracted features are used as an input for long short-term memory network (LSTM) to predict the velocity field at future time instances.
Abstract: Unsteady fluid systems are nonlinear high-dimensional dynamical systems that may exhibit multiple complex phenomena both in time and space Reduced Order Modeling (ROM) of fluid flows has been an active research topic in the recent decade with the primary goal to decompose complex flows to a set of features most important for future state prediction and control, typically using a dimensionality reduction technique In this work, a novel data-driven technique based on the power of deep neural networks for reduced order modeling of the unsteady fluid flows is introduced An autoencoder network is used for nonlinear dimension reduction and feature extraction as an alternative for singular value decomposition (SVD) Then, the extracted features are used as an input for long short-term memory network (LSTM) to predict the velocity field at future time instances The proposed autoencoder-LSTM method is compared with non-intrusive reduced order models based on dynamic mode decomposition (DMD) and proper orthogonal decomposition (POD) Moreover, an autoencoder-DMD algorithm is introduced for reduced order modeling, which uses the autoencoder network for dimensionality reduction rather than SVD rank truncation Results show that the autoencoder-LSTM method is considerably capable of predicting fluid flow evolution, where higher values for coefficient of determination $R^{2}$ are obtained using autoencoder-LSTM compared to other models
TL;DR: In this article, the authors consider the use of probabilistic neural networks for fluid flow surrogate modeling and data recovery, and demonstrate that this framework has the ability to provide for prediction confidence intervals based on the assumption of a probability distribution, given an appropriate model architecture and adequate training data.
Abstract: We consider the use of probabilistic neural networks for fluid flow {surrogate modeling} and data recovery. This framework is constructed by assuming that the target variables are sampled from a Gaussian distribution conditioned on the inputs. Consequently, the overall formulation sets up a procedure to predict the hyperparameters of this distribution which are then used to compute an objective function given training data. We demonstrate that this framework has the ability to provide for prediction confidence intervals based on the assumption of a probabilistic posterior, given an appropriate model architecture and adequate training data. The applicability of the present framework to cases with noisy measurements and limited observations is also assessed. To demonstrate the capabilities of this framework, we consider canonical regression problems of fluid dynamics from the viewpoint of reduced-order modeling and spatial data recovery for four canonical data sets. The examples considered in this study arise from (1) the shallow water equations, (2) a two-dimensional cylinder flow, (3) the wake of NACA0012 airfoil with a Gurney flap, and (4) the NOAA sea surface temperature data set. The present results indicate that the probabilistic neural network not only produces a machine-learning-based fluid flow {surrogate} model but also systematically quantifies the uncertainty therein to assist with model interpretability.
TL;DR: Qualitative visualizations suggest that to minimize the community spread of COVID-19, it may be preferable to use high quality cloth or surgical masks that are of a plain design, instead of face shields and masks equipped with exhale valves.
Abstract: Several places across the world are experiencing a steep surge in COVID-19 infections. Face masks have become increasingly accepted as one of the most effective means for combating the spread of the disease, when used in combination with social-distancing and frequent hand-washing. However, there is an increasing trend of people substituting regular cloth or surgical masks with clear plastic face shields, and with masks equipped with exhalation valves. One of the factors driving this increased adoption is improved comfort compared to regular masks. However, there is a possibility that widespread public use of these alternatives to regular masks could have an adverse effect on mitigation efforts. To help increase public awareness regarding the effectiveness of these alternative options, we use qualitative visualizations to examine the performance of face shields and exhalation valves in impeding the spread of aerosol-sized droplets. The visualizations indicate that although face shields block the initial forward motion of the jet, the expelled droplets can move around the visor with relative ease and spread out over a large area depending on light ambient disturbances. Visualizations for a mask equipped with an exhalation port indicate that a large number of droplets pass through the exhale valve unfiltered, which significantly reduces its effectiveness as a means of source control. Our observations suggest that to minimize the community spread of COVID-19, it may be preferable to use high quality cloth or surgical masks that are of a plain design, instead of face shields and masks equipped with exhale valves.
Posted Content•
TL;DR: The processes of droplet generation by exhalation, their potential transformation into airborne particles by evaporation, transport over long distances by the exhaled puff and by ambient air turbulence, and final inhalation by the receiving host are discussed as interconnected multiphase flow processes.
Abstract: COVID-19 pandemic has strikingly demonstrated how important it is to develop fundamental knowledge related to generation, transport and inhalation of pathogen-laden droplets and their subsequent possible fate as airborne particles, or aerosols, in the context of human to human transmission. It is also increasingly clear that airborne transmission is an important contributor to rapid spreading of the disease. In this paper, we discuss the processes of droplet generation by exhalation, their potential transformation into airborne particles by evaporation, transport over long distances by the exhaled puff and by ambient air turbulence, and final inhalation by the receiving host as interconnected multiphase flow processes. A simple model for the time evolution of droplet/aerosol concentration is presented based on a theoretical analysis of the relevant physical processes. The modeling framework along with detailed experiments and simulations can be used to study a wide variety of scenarios involving breathing, talking, coughing and sneezing and in a number of environmental conditions, as humid or dry atmosphere, confined or open environment. Although a number of questions remain open on the physics of evaporation and coupling with persistence of the virus, it is clear that with a more reliable understanding of the underlying flow physics of virus transmission one can set the foundation for an improved methodology in designing case-specific social distancing and infection control guidelines.
TL;DR: In this article, a mesoscale kinetic model for multicomponent flows, augmented with a short range forcing term, aimed at describing the combined effect of surface tension and near-contact interactions operating at the fluid interface level is presented.
Abstract: We present a mesoscale kinetic model for multicomponent flows, augmented with a short range forcing term, aimed at describing the combined effect of surface tension and near-contact interactions operating at the fluid interface level. Such mesoscale approach is shown to i) accurately capture the complex dynamics of bouncing colliding droplets for different values of the main governing parameters, ii) predict quantitatively the effective viscosity of dense emulsions in micro-channels and iii) simulate the formation of the so-called soft flowing crystals in microfluidic focusers.
TL;DR: A method using supervised machine learning to estimate velocity fields from particle images having missing regions due to experimental {limitations} suggests that it may be able to obtain finer and hidden structures of the flow field which cannot be resolved with the conventional cross-correlation method.
Abstract: We propose a method using supervised machine learning to estimate velocity fields from particle images having missing regions due to experimental limitations. As a first example, a velocity field around a square cylinder at Reynolds number of ${\rm Re}_D=300$ is considered. To train machine learning models, we utilize artificial particle images (APIs) as the input data, which mimic the images of the particle image velocimetry (PIV). The output data are the velocity fields, and the correct answers for them are given by a direct numerical simulation (DNS). We examine two types of the input data: APIs without missing regions (i.e., full APIs) and APIs with missing regions (lacked APIs). The missing regions in the lacked APIs are assumed following the exact experimental situation in our wind tunnel setup. The velocity fields estimated from both full and lacked APIs are in great agreement with the reference DNS data in terms of various statistical assessments. We further apply these machine learned models trained with the DNS data to experimental particle images so that their applicability to the exact experimental situation can be investigated. The velocity fields estimated by the machine learned models contain approximately 40 folds denser data than that with the conventional cross-correlation method. This finding suggests that we may be able to obtain finer and hidden structures of the flow field which cannot be resolved with the conventional cross-correlation method. We also found that even the complex flow structures are hidden due to the alignment of two square cylinders, the machine learned model is able to estimate the field in the missing region reasonably well. The present results indicate a great potential of the proposed machine learning based method as a new data reconstruction method for PIV.
Posted Content•
TL;DR: An insight into the current state of the art of the use of DRL within fluid mechanics, focusing on control and optimal design problems.
Abstract: In recent years, Artificial Neural Networks (ANNs) and Deep Learning have become increasingly popular across a wide range of scientific and technical fields, including Fluid Mechanics. While it will take time to fully grasp the potentialities as well as the limitations of these methods, evidence is starting to accumulate that point to their potential in helping solve problems for which no theoretically optimal solution method is known. This is particularly true in Fluid Mechanics, where problems involving optimal control and optimal design are involved. Indeed, such problems are famously difficult to solve effectively with traditional methods due to the combination of non linearity, non convexity, and high dimensionality they involve. By contrast, Deep Reinforcement Learning (DRL), a method of optimization based on teaching empirical strategies to an ANN through trial and error, is well adapted to solving such problems. In this short review, we offer an insight into the current state of the art of the use of DRL within fluid mechanics, focusing on control and optimal design problems.
Posted Content•
TL;DR: The proposed sparsity-seeking algorithm has achieved a successful optimisation to a reduced five-sensor layout while keeping state-of-the-art performance and a novel algorithm (S-PPO-CMA) is introduced to optimise the sensor layout.
Abstract: This paper focuses on a drag-reducing control strategy on a 2D-simulated laminar flow past a cylinder. Deep reinforcement learning algorithms have been implemented to discover efficient control schemes, using two synthetic jets located on the cylinder's poles as actuators and pressure sensors in the wake of the cylinder as feedback observation. The present work focuses on the efficiency and robustness of the identified control strategy and introduces a novel algorithm (S-PPO-CMA) to optimise the sensor layout. An energy-efficient control strategy reducing drag by 18.4% at Reynolds number 120 is obtained. This control policy is shown to be robust both to the Reynolds number in the range [100,216] and to measurement noise, enduring signal to noise ratios as low as 0.2 with negligible impact on performance. Along with a systematic study on sensor number and location, the proposed sparsity-seeking algorithm has achieved a successful optimisation to a reduced 5-sensor layout while keeping state-of-the-art performance. These results highlight the interesting possibilities of reinforcement learning for active flow control and pave the way to efficient, robust and practical implementations of these control techniques in experimental or industrial systems.
TL;DR: The evolution of droplets in space and time under varying external conditions of temperature, humidity, and wind flow by using laws of statistical and fluid mechanics concludes that both temporal and geometric distance that a healthy individual should maintain from an infected one is based on the smaller droplets under flowing air, which makes the use of a mask mandatory to prevent the virus.
Abstract: The spread of COVID19 through droplets ejected by infected individuals during sneezing and coughing has been considered as a matter of key concern. Therefore, a quantitative understanding of the propagation of droplets containing virus assumes immense importance. Here we investigate the evolution of droplets in space and time under varying external conditions of temperature, humidity and wind flow by using laws of statistical and fluid mechanics. The effects of drag, diffusion and the gravity on droplets of different sizes and ejection velocities have been considered during their motion in the air. In still air we found that bigger droplets traverse larger distance but the smaller droplets remain suspended in the air for longer time. So, in still air the horizontal distance that a healthy individual should maintain from an infected one is determined by the bigger droplets but the time interval to be maintained is determined by the smaller droplets. We show that in places with wind flow the lighter droplets travel larger distance and remain suspended in the air for longer time. Therefore, we conclude that both temporal and the geometric distance that a healthy individual should maintain from an infected one is determined by the smaller droplets under flowing air which makes the use of mask mandatory to prevent the virus. The maintenance of only stationary separation between healthy and infected individuals is not substantiated. The quantitative results obtained here will be useful to devise strategies for preventing the spread of other types of droplets also containing microorganisms.
TL;DR: In this article, the authors sketch their personal scientific bubble journey, starting with single bubble sonoluminescence, continuing with sound emission and scattering of bubbles, cavitation, snapping shrimp, impact events, air entrainment, surface micro-and nanobubbles, and finally coming to effective force models for bubbles and dispersed bubble two-phase flow.
Abstract: For centuries, bubbles have fascinated artists, engineers, and scientists alike. In spite of century-long research on them, new and often surprising bubble phenomena, features, and applications keep popping up. In this paper I sketch my personal scientific bubble journey, starting with single bubble sonoluminescence, continuing with sound emission and scattering of bubbles, cavitation, snapping shrimp, impact events, air entrainment, surface micro- and nanobubbles, and finally coming to effective force models for bubbles and dispersed bubbly two-phase flow. In particular, I also cover various applications of bubbles, namely in ultrasound diagnostics, drug and gene delivery, piezo-acoustic inkjet printing, immersion lithography, sonochemistry, electrolysis, catalysis, acoustic marine geophysical survey, and bubble drag reduction for naval vessels, and show how these applications crossed my way. I also try to show that good and interesting fundamental science and relevant applications are not a contradiction, but mutually stimulate each other in both directions.