Showing papers in "arXiv: Information Theory in 2021"

STAR: Simultaneous Transmission And Reflection for 360° Coverage by Intelligent Surfaces.

Abstract: A novel simultaneously transmitting and reflecting (STAR) system design relying on reconfigurable intelligent surfaces (RISs) is conceived. First, an existing prototype is reviewed and the potential benefits of STAR-RISs are discussed. Then, the key differences between conventional reflecting-only RISs and STAR-RISs are identified from the perspectives of hardware design, physics principles, and communication system design. Furthermore, the basic signal model of STAR-RISs is introduced, and three practical protocols are proposed for their operation, namely energy splitting, mode switching, and time switching. Based on the proposed protocols, a range of promising application scenarios are put forward for integrating STAR-RISs into next-generation wireless networks. By considering the downlink of a typical RIS-aided multiple-input single-output (MISO) system, numerical case studies are provided for revealing the superiority of STAR-RISs over other baselines, when employing the proposed protocols. Finally, several open research problems are discussed.

Foundations of User-Centric Cell-Free Massive MIMO

Abstract: Imagine a coverage area where each mobile device is communicating with a preferred set of wireless access points (among many) that are selected based on its needs and cooperate to jointly serve it, instead of creating autonomous cells. This effectively leads to a user-centric post-cellular network architecture, which can resolve many of the interference issues and service-quality variations that appear in cellular networks. This concept is called User-centric Cell-free Massive MIMO (multiple-input multiple-output) and has its roots in the intersection between three technology components: Massive MIMO, coordinated multipoint processing, and ultra-dense networks. The main challenge is to achieve the benefits of cell-free operation in a practically feasible way, with computational complexity and fronthaul requirements that are scalable to enable massively large networks with many mobile devices. This monograph covers the foundations of User-centric Cell-free Massive MIMO, starting from the motivation and mathematical definition. It continues by describing the state-of-the-art signal processing algorithms for channel estimation, uplink data reception, and downlink data transmission with either centralized or distributed implementation. The achievable spectral efficiency is mathematically derived and evaluated numerically using a running example that exposes the impact of various system parameters and algorithmic choices. The fundamental tradeoffs between communication performance, computational complexity, and fronthaul signaling requirements are thoroughly analyzed. Finally, the basic algorithms for pilot assignment, dynamic cooperation cluster formation, and power optimization are provided, while open problems related to these and other resource allocation problems are reviewed. All the numerical examples can be reproduced using the accompanying Matlab code.

Seven Defining Features of Terahertz (THz) Wireless Systems: A Fellowship of Communication and Sensing.

Abstract: Wireless communication at the terahertz (THz) frequency bands (0.1-10THz) is viewed as one of the cornerstones of tomorrow's 6G wireless systems. Owing to the large amount of available bandwidth, THz frequencies can potentially provide wireless capacity performance gains and enable high-resolution sensing. However, operating a wireless system at the THz-band is limited by a highly uncertain channel. Effectively, these channel limitations lead to unreliable intermittent links as a result of a short communication range, and a high susceptibility to blockage and molecular absorption. Consequently, such impediments could disrupt the THz band's promise of high-rate communications and high-resolution sensing capabilities. In this context, this paper panoramically examines the steps needed to efficiently deploy and operate next-generation THz wireless systems that will synergistically support a fellowship of communication and sensing services. For this purpose, we first set the stage by describing the fundamentals of the THz frequency band. Based on these fundamentals, we characterize seven unique defining features of THz wireless systems: 1) Quasi-opticality of the band, 2) THz-tailored wireless architectures, 3) Synergy with lower frequency bands, 4) Joint sensing and communication systems, 5) PHY-layer procedures, 6) Spectrum access techniques, and 7) Real-time network optimization. These seven defining features allow us to shed light on how to re-engineer wireless systems as we know them today so as to make them ready to support THz bands. Furthermore, these features highlight how THz systems turn every communication challenge into a sensing opportunity. Ultimately, the goal of this article is to chart a forward-looking roadmap that exposes the necessary solutions and milestones for enabling THz frequencies to realize their potential as a game changer for next-generation wireless systems.

Federated Learning With Quantized Global Model Updates

Abstract: We study federated learning (FL), which enables mobile devices to utilize their local datasets to collaboratively train a global model with the help of a central server, while keeping data localized At each iteration, the server broadcasts the current global model to the devices for local training, and aggregates the local model updates from the devices to update the global model Previous work on the communication efficiency of FL has mainly focused on the aggregation of model updates from the devices, assuming perfect broadcasting of the global model In this paper, we instead consider broadcasting a compressed version of the global model This is to further reduce the communication cost of FL, which can be particularly limited when the global model is to be transmitted over a wireless medium We introduce a lossy FL (LFL) algorithm, in which both the global model and the local model updates are quantized before being transmitted We analyze the convergence behavior of the proposed LFL algorithm assuming the availability of accurate local model updates at the server Numerical experiments show that the proposed LFL scheme, which quantizes the global model update (with respect to the global model estimate at the devices) rather than the global model itself, significantly outperforms other existing schemes studying quantization of the global model at the PS-to-device direction Also, the performance loss of the proposed scheme is marginal compared to the fully lossless approach, where the PS and the devices transmit their messages entirely without any quantization

Hybrid Satellite-UAV-Terrestrial Networks for 6G Ubiquitous Coverage: A Maritime Communications Perspective

Abstract: In the coming smart ocean era, reliable and efficient communications are crucial for promoting a variety of maritime activities. Current maritime communication networks (MCNs) mainly rely on marine satellites and on-shore base stations (BSs). The former generally provides limited transmission rate, while the latter lacks wide-area coverage capability. Due to these facts, the state-of-the-art MCN falls far behind terrestrial fifth-generation (5G) networks. To fill up the gap in the coming sixth-generation (6G) era, we explore the benefit of deployable BSs for maritime coverage enhancement. Both unmanned aerial vehicles (UAVs) and mobile vessels are used to configure deployable BSs. This leads to a hierarchical satellite-UAV-terrestrial network on the ocean. We address the joint link scheduling and rate adaptation problem for this hybrid network, to minimize the total energy consumption with quality of service (QoS) guarantees. Different from previous studies, we use only the large-scale channel state information (CSI), which is location-dependent and thus can be predicted through the position information of each UAV/vessel based on its specific trajectory/shipping lane. The problem is shown to be an NP-hard mixed integer nonlinear programming problem with a group of hidden non-linear equality constraints. We solve it suboptimally by using Min-Max transformation and iterative problem relaxation, leading to a process-oriented joint link scheduling and rate adaptation scheme. As observed by simulations, the scheme can provide agile on-demand coverage for all users with much reduced system overhead and a polynomial computation complexity. Moreover, it can achieve a prominent performance close to the optimal solution.

A Survey on Fundamental Limits of Integrated Sensing and Communication

Abstract: The integrated sensing and communication (ISAC), in which the sensing and communication share the same frequency band and hardware, has emerged as a key technology in future wireless systems. Early works on ISAC have been focused on the design, analysis and optimization of practical ISAC technologies for various ISAC systems. While this line of works are necessary, it is equally important to study the fundamental limits of ISAC in order to understand the gap between the current state-of-the-art technologies and the performance limits, and provide useful insights and guidance for the development of better ISAC technologies that can approach the performance limits. In this paper, we aim to provide a comprehensive survey for the current research progress on the fundamental limits of ISAC. Particularly, we first propose a systematic classification method for both traditional radio sensing (such as radar sensing and wireless localization) and ISAC so that they can be naturally incorporated into a unified framework. Then we summarize the major performance metrics and bounds used in sensing, communications and ISAC, respectively. After that, we present the current research progresses on fundamental limits of each class of the traditional sensing and ISAC systems. Finally, the open problems and future research directions are discussed.

Federated Learning for 6G: Applications, Challenges, and Opportunities.

Abstract: Traditional machine learning is centralized in the cloud (data centers). Recently, the security concern and the availability of abundant data and computation resources in wireless networks are pushing the deployment of learning algorithms towards the network edge. This has led to the emergence of a fast growing area, called federated learning (FL), which integrates two originally decoupled areas: wireless communication and machine learning. In this paper, we provide a comprehensive study on the applications of FL for sixth generation (6G) wireless networks. First, we discuss the key requirements in applying FL for wireless communications. Then, we focus on the motivating application of FL for wireless communications. We identify the main problems, challenges, and provide a comprehensive treatment of implementing FL techniques for wireless communications.

Millimeter-Wave and Terahertz Spectrum for 6G Wireless

Abstract: With the standardization of 5G, commercial millimeter wave (mmWave) communications has become a reality despite all the concerns about the unfavorable propagation characteristics of these frequencies. Even though the 5G systems are still being rolled out, it is argued that their gigabits per second rates may fall short in supporting many emerging applications, such as 3D gaming and extended reality. Such applications will require several hundreds of gigabits per second to several terabits per second data rates with low latency and high reliability, which are expected to be the design goals of the next generation 6G communications systems. Given the potential of terahertz (THz) communications systems to provide such data rates over short distances, they are widely regarded to be the next frontier for the wireless communications research. The primary goal of this chapter is to equip readers with sufficient background about the mmWave and THz bands so that they are able to both appreciate the necessity of using these bands for commercial communications in the current wireless landscape and to reason the key design considerations for the communications systems operating in these bands. Towards this goal, this chapter provides a unified treatment of these bands with particular emphasis on their propagation characteristics, channel models, design and implementation considerations, and potential applications to 6G wireless. A brief summary of the current standardization activities related to the use of these bands for commercial communications applications is also provided.

User-centric Cell-free Massive MIMO Networks: A Survey of Opportunities, Challenges and Solutions.

Abstract: Densification of network base stations is indispensable to achieve the stringent Quality of Service (QoS) requirements of future mobile networks. However, with a dense deployment of transmitters, interference management becomes an arduous task. To solve this issue, exploring radically new network architectures with intelligent coordination and cooperation capabilities is crucial. This survey paper investigates the emerging user-centric cell-free massive multiple-input multiple-output (MIMO) network architecture that sets a foundation for future mobile networks. Such networks use a dense deployment of distributed units (DUs) to serve users; the crucial difference from the traditional cellular paradigm is that a specific serving cluster of DUs is defined for each user. This framework provides macro diversity, power efficiency, interference management, and robust connectivity. Most importantly, the user-centric approach eliminates cell edges, thus contributing to uniform coverage and performance for users across the network area. We present here a guide to the key challenges facing the deployment of this network scheme and contemplate the solutions being proposed for the main bottlenecks facing cell-free communications. Specifically, we survey the literature targeting the fronthaul, then we scan the details of the channel estimation required, resource allocation, delay, and scalability issues. Furthermore, we highlight some technologies that can provide a management platform for this scheme such as distributed software-defined network (SDN) and self-organizing network (SON). Our article serves as a check point that delineates the current status and indicates future directions for this area in a comprehensive manner.

Reconfigurable Intelligent Surface-Assisted Cell-Free Massive MIMO Systems Over Spatially-Correlated Channels.

Abstract: Cell-Free Massive multiple-input multiple-output (MIMO) and reconfigurable intelligent surface (RIS) are two promising technologies for application to beyond-5G networks. This paper considers Cell-Free Massive MIMO systems with the assistance of an RIS for enhancing the system performance under the presence of spatial correlation among the scattering elements of the RIS. Distributed maximum-ratio processing is considered at the access points (APs). We introduce an aggregated channel estimation approach that provides sufficient information for data processing with the main benefit of reducing the overhead required for channel estimation. The considered system is studied by using asymptotic analysis which lets the number of APs and/or the number of RIS elements grow large. A lower bound for the channel capacity is obtained for a finite number of APs and scattering elements of the RIS, and closed-form expressions for the uplink and downlink ergodic net throughput are formulated in terms of only the channel statistics. Based on the obtained analytical frameworks, we unveil the impact of channel correlation, the number of RIS elements, and the pilot contamination on the net throughput of each user. In addition, a simple control scheme for controlling the configuration of the scattering elements of the RIS is proposed, which is shown to increase the channel estimation quality, and, hence, the system performance. Numerical results demonstrate the effectiveness of our system design and performance analysis. In particular, the performance benefits of using RISs in Cell-Free Massive MIMO systems are confirmed, especially if the direct links between the APs and the users are of insufficient quality with a high probability.

A Survey on Channel Estimation and Practical Passive Beamforming Design for Intelligent Reflecting Surface Aided Wireless Communications.

Abstract: Intelligent reflecting surface (IRS) has emerged as a key enabling technology to realize smart and reconfigurable radio environment for wireless communications, by digitally controlling the signal reflection via a large number of passive reflecting elements in real time. Different from conventional wireless communication techniques that only adapt to but have no or limited control over dynamic wireless channels, IRS provides a new and cost-effective means to combat the wireless channel impair-ments in a proactive manner. However, despite its great potential, IRS faces new and unique challenges in its efficient integration into wireless communication systems, especially its channel estimation and passive beamforming design under various practical hardware constraints. In this paper, we provide a comprehensive survey on the up-to-date research in IRS-aided wireless communications, with an emphasis on the promising solutions to tackle practical design issues. Furthermore, we discuss new and emerging IRS architectures and applications as well as their practical design problems to motivate future research.

Enabling Smart Reflection in Integrated Air-Ground Wireless Network: IRS Meets UAV.

Abstract: Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhance the UAV-ground communication performance, while UAV-mounted IRS is employed to assist in the terrestrial communication. We present their promising application scenarios, new communication design issues as well as potential solutions. In particular, we show that it is practically beneficial to deploy both the terrestrial and aerial IRSs in future wireless networks to reap the benefits of smart reflections in three-dimensional (3D) space.

What Will the Future of UAV Cellular Communications Be? A Flight from 5G to 6G.

Abstract: What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cell selection and interference challenges, we showcase encouraging mmWave coverage evaluations in both urban and suburban/rural settings, and we examine the peculiarities of direct device-to-device communications in the sky. Moving on, we sneak a peek at next-generation UAV communications, listing some of the use cases envisioned for the 2030s. We identify the most promising 6G enablers for UAV communication, those expected to take the performance and reliability to the next level. For each of these disruptive new paradigms (non-terrestrial networks, cell-free architectures, artificial intelligence, reconfigurable intelligent surfaces, and THz communications), we gauge the prospective benefits for UAVs and discuss the main technological hurdles that stand in the way. All along, we distil our numerous findings into essential takeaways, and we identify key open problems worthy of further study.

Improving Physical Layer Security for Reconfigurable Intelligent Surface aided NOMA 6G Networks

Abstract: The intrinsic integration of the nonorthogonal multiple access (NOMA) and reconfigurable intelligent surface (RIS) techniques is envisioned to be a promising approach to significantly improve both the spectrum efficiency and energy efficiency for future wireless communication networks. In this paper, the physical layer security (PLS) for a RIS-aided NOMA 6G networks is investigated, in which a RIS is deployed to assist the two "dead zone" NOMA users and both internal and external eavesdropping are considered. For the scenario with only internal eavesdropping, we consider the worst case that the near-end user is untrusted and may try to intercept the information of far-end user. A joint beamforming and power allocation sub-optimal scheme is proposed to improve the system PLS. Then we extend our work to a scenario with both internal and external eavesdropping. Two sub-scenarios are considered in this scenario: one is the sub-scenario without channel state information (CSI) of eavesdroppers, and another is the sub-scenario where the eavesdroppers' CSI are available. For the both sub-scenarios, a noise beamforming scheme is introduced to be against the external eavesdroppers. An optimal power allocation scheme is proposed to further improve the system physical security for the second sub-scenario. Simulation results show the superior performance of the proposed schemes. Moreover, it has also been shown that increasing the number of reflecting elements can bring more gain in secrecy performance than that of the transmit antennas.

Average Rate and Error Probability Analysis in Short Packet Communications over RIS-aided URLLC Systems

Abstract: In this paper, the average achievable rate and error probability of a reconfigurable intelligent surface (RIS) aided systems is investigated for the finite blocklength (FBL) regime. The performance loss due to the presence of phase errors arising from limited quantization levels as well as hardware impairments at the RIS elements is also discussed. First, the composite channel containing the direct path plus the product of reflected channels through the RIS is characterized. Then, the distribution of the received signal-to-noise ratio (SNR) is matched to a Gamma random variable whose parameters depend on the total number of RIS elements, phase errors and the channels' path loss. Next, by considering the FBL regime, the achievable rate expression and error probability are identified and the corresponding average rate and average error probability are elaborated based on the proposed SNR distribution. Furthermore, the impact of the presence of phase error due to either limited quantization levels or hardware impairments on the average rate and error probability is discussed. The numerical results show that Monte Carlo simulations conform to matched Gamma distribution to received SNR for sufficiently large number of RIS elements. In addition, the system reliability indicated by the tightness of the SNR distribution increases when RIS is leveraged particularly when only the reflected channel exists. This highlights the advantages of RIS-aided communications for ultra-reliable and low-latency systems. The difference between Shannon capacity and achievable rate in FBL regime is also discussed. Additionally, the required number of RIS elements to achieve a desired error probability in the FBL regime will be significantly reduced when the phase shifts are performed without error.

Federated Learning over Energy Harvesting Wireless Networks

Abstract: In this paper, the deployment of federated learning (FL) is investigated in an energy harvesting wireless network in which the base station (BS) employs massive multiple-input multiple-output (MIMO) to serve a set of users powered by independent energy harvesting sources. Since a certain number of users may not be able to participate in FL due to the interference and energy constraints, a joint energy management and user scheduling problem in FL over wireless systems is formulated. This problem is formulated as an optimization problem whose goal is to minimize the FL training loss via optimizing user scheduling. To find how the factors such as transmit power and number of scheduled users affect the training loss, the convergence rate of the FL algorithm is first analyzed. Given this analytical result, the user scheduling and energy management optimization problem can be decomposed, simplified, and solved. Further, the system model is extended by considering multiple BSs. Hence, a joint user association and scheduling problem in FL over wireless systems is studied. The optimal user association problem is solved using the branch-and-bound technique. Simulation results show that the proposed user scheduling and user association algorithm can reduce training loss compared to a standard FL algorithm.

Industrial Digital Twins at the Nexus of NextG Wireless Networks and Computational Intelligence: A Survey.

Abstract: By amalgamating recent communication and control technologies, computing and data analytics techniques, and modular manufacturing, Industry~4.0 promotes integrating cyber-physical worlds through cyber-physical systems (CPS) and digital twin (DT) for monitoring, optimization, and prognostics of industrial processes. A DT is an emerging but conceptually different construct than CPS. Like CPS, DT relies on communication to create a highly-consistent, synchronized digital mirror image of the objects or physical processes. DT, in addition, uses built-in models on this precise image to simulate, analyze, predict, and optimize their real-time operation using feedback. DT is rapidly diffusing in the industries with recent advances in the industrial Internet of things (IIoT), edge and cloud computing, machine learning, artificial intelligence, and advanced data analytics. However, the existing literature lacks in identifying and discussing the role and requirements of these technologies in DT-enabled industries from the communication and computing perspective. In this article, we first present the functional aspects, appeal, and innovative use of DT in smart industries. Then, we elaborate on this perspective by systematically reviewing and reflecting on recent research in next-generation (NextG) wireless technologies (e.g., 5G and beyond networks), various tools (e.g., age of information, federated learning, data analytics), and other promising trends in networked computing (e.g., edge and cloud computing). Moreover, we discuss the DT deployment strategies at different industrial communication layers to meet the monitoring and control requirements of industrial applications. We also outline several key reflections and future research challenges and directions to facilitate industrial DT's adoption.

IRS Meets Relaying: Joint Resource Allocation and Passive Beamforming Optimization

Abstract: Intelligent reflecting surface (IRS) has recently emerged as a new solution to enhance wireless communication performance via passive signal reflection. In this letter, we unlock the potential of IRS controller in relaying information and propose a novel IRS-assisted communication system with both IRS passive reflection and active relaying. Specifically, we jointly optimize the time allocations for decode-and-forward (DF) relaying by the IRS controller and the IRS passive beamforming to maximize the achievable rate of the proposed system. We also compare the rate performance of the proposed system with the conventional IRS without relaying, and reveal the conditions for one to outperform the other. Simulation results demonstrate that the proposed new design can significantly improve the coverage/rate performance of IRS-assisted systems.

Hybrid Beamforming for Terahertz Wireless Communications: Challenges, Architectures, and Open Problems

Abstract: Terahertz (THz) communications are regarded as a pillar technology for the sixth generation (6G) wireless systems, by offering multi-ten-GHz bandwidth. To overcome the short transmission distance and huge propagation loss, ultra-massive (UM) MIMO systems that employ sub-millimeter wavelength antennas array are proposed to enable an enticingly high array gain. In the UM-MIMO systems, hybrid beamforming stands out for its great potential in promisingly high data rate and reduced power consumption. In this paper, challenges and features of the THz hybrid beamforming design are investigated, in light of the distinctive THz peculiarities. Specifically, we demonstrate that the spatial degree-of-freedom (SDoF) is less than 5, which is caused by the extreme sparsity of the THz channel. The blockage problem caused by the huge reflection and scattering losses, as high as 15 dB or over, is studied. Moreover, we analyze the challenges led by the array containing 1024 or more antennas, including the requirement for intelligent subarray architecture, strict energy efficiency, and propagation characterization based on spherical-wave propagation mechanisms. Owning up to hundreds of GHz bandwidth, beam squint effect could cause over 5~dB array gain loss, when the fractional bandwidth exceeds 10%. Inspired by these facts, three novel THz-specific hybrid beamforming architectures are presented, including widely-spaced multi-subarray, dynamic array-of-subarrays, and true-time-delay-based architectures. We also demonstrate the potential data rate, power consumption, and array gain capabilities for THz communications. As a roadmap of THz hybrid beamforming design, multiple open problems and potential research directions are elaborated.

Dilated Convolution based CSI Feedback Compression for Massive MIMO Systems.

Abstract: Although the frequency-division duplex (FDD) massive multiple-input multiple-output (MIMO) system can offer high spectral and energy efficiency, it requires to feedback the downlink channel state information (CSI) from users to the base station (BS), in order to fulfill the precoding design at the BS. However, the large dimension of CSI matrices in the massive MIMO system makes the CSI feedback very challenging, and it is urgent to compress the feedback CSI. To this end, this paper proposes a novel dilated convolution based CSI feedback network, namely DCRNet. Specifically, the dilated convolutions are used to enhance the receptive field (RF) of the proposed DCRNet without increasing the convolution size. Moreover, advanced encoder and decoder blocks are designed to improve the reconstruction performance and reduce computational complexity as well. Numerical results are presented to show the superiority of the proposed DCRNet over the conventional networks. In particular, the proposed DCRNet can achieve almost the state-of-the-arts (SOTA) performance with much lower floating point operations (FLOPs). The open source code and checkpoint of this work are available at this https URL.

On the Distribution of the Sum of Double-Nakagami-m Random Vectors and Application in Randomly Reconfigurable Surfaces

Abstract: Reconfigurable intelligent surfaces (RISs) intend to improve significantly the performance of future wireless networks, by controlling the wireless propagation medium through elements that can shift the phase of the reflected signals. Although ideally the signals reflected from a RIS are added coherently at the receiver, this is very challenging in practice due to the requirement for perfect channel state information (CSI) at the RIS and phase control. To facilitate the performance analysis of more practical RIS-assisted systems, first, we present novel closed-form expressions for the probability density function, the cumulative distribution function, the moments, and the characteristic function of the distribution of the sum of double-Nakagami-m random vectors, whose amplitudes follow the double-Nakagami-m distribution, i.e., the distribution of the product of two random variables following the Nakagami-m distribution, and phases are circular uniformly distributed. We also consider a special case of this distribution, namely the distribution of the sum of Rayleigh-Nakagami-m random vectors. Then, we exploit these expressions to investigate the performance of the RIS-assisted composite channel, assuming that the two links undergo Nakagami-m fading and the equivalent phase follows the uniform distribution, which corresponds to the case where CSI is not available at the RIS and leads to a lower bound of the performance of a system with CSI. Closed-form expressions for the outage probability, the average received signal-to-noise ratio, the ergodic capacity, the bit error probability, the amount of fading, and the channel quality estimation index are provided to evaluate the performance of the considered system. These metrics are also derived for the practical special case where one of the two links undergoes Rayleigh fading.

Capacity Optimality of AMP in Coded Systems

Abstract: This paper studies a large random matrix system (LRMS) model involving an arbitrary signal distribution and forward error control (FEC) coding. We establish an area property based on the approximate message passing (AMP) algorithm. Under the assumption that the state evolution for AMP is correct for the coded system, the achievable rate of AMP is analyzed. We prove that AMP achieves the constrained capacity of the LRMS with an arbitrary signal distribution provided that a matching condition is satisfied. We provide related numerical results of binary signaling using irregular low-density parity-check (LDPC) codes. We show that the optimized codes demonstrate significantly better performance over un-matched ones under AMP. For quadrature phase shift keying (QPSK) modulation, bit error rate (BER) performance within 1 dB from the constrained capacity limit is observed.

Collaborative Multi-Resource Allocation in Terrestrial-Satellite Network Towards 6G

Abstract: Terrestrial-satellite networks are envisioned to play a significant role in the sixth-generation (6G) wireless networks. In such networks, hot air balloons are useful as they can relay the signals between satellites and ground stations. Most existing works assume that the hot air balloons are deployed at the same height with the same minimum elevation angle to the satellites, which may not be practical due to possible route conflict with airplanes and other flight equipment. In this paper, we consider a TSN containing hot air balloons at different heights and with different minimum elevation angles, which creates the challenge of non-uniform available serving time for the communication between the hot air balloons and the satellites. Jointly considering the caching, computing, and communication (3C) resource management for both the ground-balloon-satellite links and inter-satellite laser links, our objective is to maximize the network energy efficiency. Firstly, by proposing a tapped water-filling algorithm, we schedule the traffic to relay among satellites according to the available serving time of satellites. Then, we generate a series of configuration matrices, based on which we formulate the relationship of relay time and the power consumption involved in the relay among satellites. Finally, the integrated system model of TSN is built and solved by geometric programming with Taylor series approximation. Simulation results demonstrate the effectiveness of our proposed scheme.

Propagation Measurements and Path Loss Models for sub-THz in Urban Microcells

Abstract: Terahertz frequency bands will likely be used for the next-generation wireless communication systems to provide data rates of hundreds of Gbps or even Tbps because of the wide swaths of unused and unexplored spectrum. This paper presents two outdoor wideband measurement campaigns in downtown Brooklyn (urban microcell environment) in the sub-THz band of 140 GHz with TX-RX separation distance up to 100 m: i) terrestrial urban microcell measurement campaign, and ii) rooftop surrogate satellite and backhaul measurement campaign. Outdoor omnidirectional and directional path loss models for both line-of-sight and non-line-of-sight scenarios, as well as foliage loss (signal attenuation through foliage), are provided at 140 GHz for urban microcell environments. These measurements and models provide an understanding of both the outdoor terrestrial (e.g., 6G cellular and backhaul) and non-terrestrial (e.g., satellite and unmanned aerial vehicle communications) wireless channels, and prove the feasibility of using THz frequency bands for outdoor fixed and mobile cellular communications. This paper can be used for future outdoor wireless system design at frequencies above 100 GHz.

Channel Estimation with Reconfigurable Intelligent Surfaces - A General Framework.

Abstract: Optimally extracting the advantages available from reconfigurable intelligent surfaces (RISs) in wireless communications systems requires estimation of the channels to and from the RIS. The process of determining these channels is complicated by the fact that the RIS is typically composed of passive elements without any data processing capabilities, and thus the channels must be estimated indirectly by a non-colocated device, typically a controlling base station. In this article, we examine channel estimation for RIS-based systems from a fundamental viewpoint. We study various possible channel models and the identifiability of the models as a function of the available pilot data and behavior of the RIS during training. In particular, we consider situations with and without line-of-sight propagation, single- and multiple-antenna configurations for the users and base station, correlated and sparse channel models, single-carrier and wideband OFDM scenarios, availability of direct links between the users and base station, exploitation of prior information, as well as a number of other special cases. We further conduct numerical comparisons of achievable performance for various channel models using the relevant Cramer-Rao bounds.

Delay-Phase Precoding for Wideband THz Massive MIMO.

Abstract: Benefiting from tens of GHz bandwidth, terahertz (THz) communication is considered to be a promising technology to provide ultra-high speed data rates for future 6G wireless systems To compensate for the serious propagation attenuation of THz signals, massive multiple-input multiple-output (MIMO) with hybrid precoding can be utilized to generate directional beams with high array gains However, the standard hybrid precoding architecture based on frequency-independent phase-shifters cannot cope with the beam split effect in THz massive MIMO systems, where the directional beams will split into different physical directions at different subcarrier frequencies The beam split effect will result in a serious array gain loss across the entire bandwidth, which has not been well investigated in THz massive MIMO systems In this paper, we first reveal and quantify the seriousness of the beam split effect in THz massive MIMO systems by analyzing the array gain loss it causes Then, we propose a new precoding architecture called delay-phase precoding (DPP) to mitigate this effect Specifically, the proposed DPP introduces a time delay network as a new precoding layer between radio-frequency chains and phase-shifters in the standard hybrid precoding architecture In this way, conventional phase-controlled analog beamforming can be converted into delay-phase controlled analog beamforming Unlike frequency-independent phase shifts, the time delay network introduced in the DPP can realize frequency-dependent phase shifts, which can be designed to generate frequency-dependent beams towards the target physical direction across the entire THz bandwidth Due to the joint control of delay and phase, the proposed DPP can significantly relieve the array gain loss caused by the beam split effect Furthermore, we propose a hardware structure by using true-time-delayers to realize the concept of DPP

Off-grid Channel Estimation with Sparse Bayesian Learning for OTFS Systems.

Abstract: This paper proposes an off-grid channel estimation scheme for orthogonal time-frequency space (OTFS) systems adopting the sparse Bayesian learning (SBL) framework. To avoid channel spreading caused by the fractional delay and Doppler shifts and to fully exploit the channel sparsity in the delay-Doppler (DD) domain, we estimate the original DD domain channel response rather than the effective DD domain channel response as commonly adopted in the literature. OTFS channel estimation is first formulated as a one-dimensional (1D) off-grid sparse signal recovery (SSR) problem based on a virtual sampling grid defined in the DD space, where the on-grid and off-grid components of the delay and Doppler shifts are separated for estimation. In particular, the on-grid components of the delay and Doppler shifts are jointly determined by the entry indices with significant values in the recovered sparse vector. Then, the corresponding off-grid components are modeled as hyper-parameters in the proposed SBL framework, which can be estimated via the expectation-maximization method. To strike a balance between channel estimation performance and computational complexity, we further propose a two-dimensional (2D) off-grid SSR problem via decoupling the delay and Doppler shift estimations. In our developed 1D and 2D off-grid SBL-based channel estimation algorithms, the hyper-parameters are updated alternatively for computing the conditional posterior distribution of channels, which can be exploited to reconstruct the effective DD domain channel. Compared with the 1D method, the proposed 2D method enjoys a much lower computational complexity while only suffers slight performance degradation. Simulation results verify the superior performance of the proposed channel estimation schemes over state-of-the-art schemes.

CLNet: Complex Input Lightweight Neural Network designed for Massive MIMO CSI Feedback

Abstract: The Massive Multiple Input Multiple Output (MIMO) system is a core technology of the next generation communication. With the growing complexity of CSI, CSI feedback in massive MIMO system has become a bottleneck problem, the traditional compressive sensing based CSI feedback approaches have limited performance. Recently, numerous deep learning based CSI feedback approaches demonstrate their efficiency and potential. However, most existing methods improve accuracy at the cost of computational complexity and the accuracy decreases significantly as the CSI compression rate increases. This paper presents a novel neural network CLNet tailored for CSI feedback problem based on the intrinsic properties of CSI. The experiment result shows that CLNet outperforms the state-of-the-art method by average accuracy improvement of 5.41% in both outdoor and indoor scenarios with average 24.1% less computational overhead. Codes are available at GitHub.

What is Semantic Communication? A View on Conveying Meaning in the Era of Machine Intelligence.

Abstract: In 1940s, Claude Shannon developed the information theory focusing on quantifying the maximum data rate that can be supported by a communication channel. Guided by this, the main theme of wireless system design up until 5G was the data rate maximization. In his theory, the semantic aspect and meaning of messages were treated as largely irrelevant to communication. The classic theory started to reveal its limitations in the modern era of machine intelligence, consisting of the synergy between IoT and AI. By broadening the scope of the classic framework, in this article we present a view of semantic communication (SemCom) and conveying meaning through the communication systems. We address three communication modalities, human-to-human (H2H), human-to-machine (H2M), and machine-to-machine (M2M) communications. The latter two, the main theme of the article, represent the paradigm shift in communication and computing. H2M SemCom refers to semantic techniques for conveying meanings understandable by both humans and machines so that they can interact. M2M SemCom refers to effectiveness techniques for efficiently connecting machines such that they can effectively execute a specific computation task in a wireless network. The first part of the article introduces SemCom principles including encoding, system architecture, and layer-coupling and end-to-end design approaches. The second part focuses on specific techniques for application areas of H2M (human and AI symbiosis, recommendation, etc.) and M2M SemCom (distributed learning, split inference, etc.) Finally, we discuss the knowledge graphs approach for designing SemCom systems. We believe that this comprehensive introduction will provide a useful guide into the emerging area of SemCom that is expected to play an important role in 6G featuring connected intelligence and integrated sensing, computing, communication, and control.

Terahertz Wireless Channels: A Holistic Survey on Measurement, Modeling, and Analysis.

Abstract: Terahertz (THz) communications are envisioned as a key technology for sixth generation (6G) wireless systems. The study of underlying THz wireless propagation channels provides the foundations for the development of reliable THz communication systems and their applications. This article provides a comprehensive overview of the study of THz wireless channels. First, the three most popular THz channel measurement methodologies, namely, frequency-domain channel measurement based on a vector network analyzer (VNA), time-domain channel measurement based on sliding correlation, and time-domain channel measurement based on THz pulses from time-domain spectroscopy (THz-TDS), are introduced and compared. Current channel measurement systems and measurement campaigns are reviewed. Then, existing channel modeling methodologies are categorized into deterministic, stochastic, and hybrid approaches. State-of-the-art THz channel models are analyzed, and the channel simulators that are based on them are introduced. Next, an in-depth review of channel characteristics in the THz band is presented. Finally, open problems and future research directions for research studies on THz wireless channels for 6G are elaborated.