Showing papers in "arXiv: Instrumentation and Methods for Astrophysics in 2009"
TL;DR: The Large Area Telescope (Fermi/LAT) as discussed by the authors is the primary instrument on the Fermi Gamma-ray Space Telescope, which is an imaging, wide field-of-view, high-energy gamma-ray telescope, covering the energy range from below 20 MeV to more than 300 GeV.
Abstract: (Abridged) The Large Area Telescope (Fermi/LAT, hereafter LAT), the primary instrument on the Fermi Gamma-ray Space Telescope (Fermi) mission, is an imaging, wide field-of-view, high-energy gamma-ray telescope, covering the energy range from below 20 MeV to more than 300 GeV. This paper describes the LAT, its pre-flight expected performance, and summarizes the key science objectives that will be addressed. On-orbit performance will be presented in detail in a subsequent paper. The LAT is a pair-conversion telescope with a precision tracker and calorimeter, each consisting of a 4x4 array of 16 modules, a segmented anticoincidence detector that covers the tracker array, and a programmable trigger and data acquisition system. Each tracker module has a vertical stack of 18 x,y tracking planes, including two layers (x and y) of single-sided silicon strip detectors and high-Z converter material (tungsten) per tray. Every calorimeter module has 96 CsI(Tl) crystals, arranged in an 8 layer hodoscopic configuration with a total depth of 8.6 radiation lengths. The aspect ratio of the tracker (height/width) is 0.4 allowing a large field-of-view (2.4 sr). Data obtained with the LAT are intended to (i) permit rapid notification of high-energy gamma-ray bursts (GRBs) and transients and facilitate monitoring of variable sources, (ii) yield an extensive catalog of several thousand high-energy sources obtained from an all-sky survey, (iii) measure spectra from 20 MeV to more than 50 GeV for several hundred sources, (iv) localize point sources to 0.3 - 2 arc minutes, (v) map and obtain spectra of extended sources such as SNRs, molecular clouds, and nearby galaxies, (vi) measure the diffuse isotropic gamma-ray background up to TeV energies, and (vii) explore the discovery space for dark matter.
3,046 citations
TL;DR: The Palomar Transient Factory (PTF) as mentioned in this paper is a fully-automated, wide-field survey aimed at a systematic exploration of the optical transient sky.
Abstract: The Palomar Transient Factory (PTF) is a fully-automated, wide-field survey aimed at a systematic exploration of the optical transient sky. The transient survey is performed using a new 8.1 square degree camera installed on the 48-inch Samuel Oschin telescope at Palomar Observatory; colors and light curves for detected transients are obtained with the automated Palomar 60-inch telescope. PTF uses eighty percent of the 1.2-m and fifty percent of the 1.5-m telescope time. With an exposure of 60-s the survey reaches a depth of approximately 21.3 in g' and 20.6 in R (5 sigma, median seeing). Four major experiments are planned for the five-year project: 1) a 5-day cadence supernova search; 2) a rapid transient search with cadences between 90 seconds and 1 day; 3) a search for eclipsing binaries and transiting planets in Orion; and 4) a 3-pi sr deep H-alpha survey. PTF provides automatic, realtime transient classification and follow up, as well as a database including every source detected in each frame. This paper summarizes the PTF project, including several months of on-sky performance tests of the new survey camera, the observing plans and the data reduction strategy. We conclude by detailing the first 51 PTF optical transient detections, found in commissioning data.
1,154 citations
Posted Content•
TL;DR: The Large Synoptic Survey Telescope (LSST) as discussed by the authors will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 degrees.
Abstract: A survey that can cover the sky in optical bands over wide fields to faint magnitudes with a fast cadence will enable many of the exciting science opportunities of the next decade. The Large Synoptic Survey Telescope (LSST) will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 deg^2, and will be devoted to a ten-year imaging survey over 20,000 deg^2 south of +15 deg. Each pointing will be imaged 2000 times with fifteen second exposures in six broad bands from 0.35 to 1.1 microns, to a total point-source depth of r~27.5. The LSST Science Book describes the basic parameters of the LSST hardware, software, and observing plans. The book discusses educational and outreach opportunities, then goes on to describe a broad range of science that LSST will revolutionize: mapping the inner and outer Solar System, stellar populations in the Milky Way and nearby galaxies, the structure of the Milky Way disk and halo and other objects in the Local Volume, transient and variable objects both at low and high redshift, and the properties of normal and active galaxies at low and high redshift. It then turns to far-field cosmological topics, exploring properties of supernovae to z~1, strong and weak lensing, the large-scale distribution of galaxies and baryon oscillations, and how these different probes may be combined to constrain cosmological models and the physics of dark energy.
1,135 citations
TL;DR: The MAXI (Monitor of All-sky X-ray Image) mission is the first astronomical payload to be installed on the Japanese Experiment Module-Exposed Facility (JEM-EF) on the ISS as discussed by the authors.
Abstract: The MAXI (Monitor of All-sky X-ray Image) mission is the first astronomical payload to be installed on the Japanese Experiment Module-Exposed Facility (JEM-EF) on the ISS. It is scheduled for launch in the middle of 2009 to monitor all-sky X-ray objects on every ISS orbit. MAXI will be more powerful than any previous X-ray All Sky Monitor (ASM) payloads, being able to monitor hundreds of AGN. MAXI will provide all sky images of X-ray sources of about 20 mCrab in the energy band of 2-30 keV from observation on one ISS orbit (90 min), about 4.5 mCrab for one day, and about 1 mCrab for one month. A final detectability of MAXI could be 0.2 mCrab for 2 year observations.
486 citations
TL;DR: In this article, the authors present results of a pilot study into the motivations and demographics of Galaxy Zoo volunteers, and define a technique to determine motivations from free responses that can be used in larger multiple-choice surveys with similar populations.
Abstract: The Galaxy Zoo citizen science website invites anyone with an Internet connection to participate in research by classifying galaxies from the Sloan Digital Sky Survey. As of April 2009, more than 200,000 volunteers had made more than 100 million galaxy classifications. In this paper, we present results of a pilot study into the motivations and demographics of Galaxy Zoo volunteers, and define a technique to determine motivations from free responses that can be used in larger multiple-choice surveys with similar populations. Our categories form the basis for a future survey, with the goal of determining the prevalence of each motivation.
432 citations
TL;DR: The Large APEX Bolometer Camera (LABOCA) as mentioned in this paper is a new facility instrument for the Atacama Pathfinder Experiment (APEX) 12m submillimeter telescope.
Abstract: The Large APEX Bolometer Camera, LABOCA, has been commissioned for operation as a new facility instrument t the Atacama Pathfinder Experiment 12m submillimeter telescope. This new 295-bolometer total power camera, operating in the 870 micron atmospheric window, combined with the high efficiency of APEX and the excellent atmospheric transmission at the site, offers unprecedented capability in mapping submillimeter continuum emission for a wide range of astronomical purposes.
396 citations
TL;DR: The Murchison Widefield Array (MWA) as discussed by the authors is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range and is capable of a wide range of science investigations, but is initially focused on three key science projects.
Abstract: The Murchison Widefield Array (MWA) is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range. It is capable of a wide range of science investigations, but is initially focused on three key science projects. These are detection and characterization of 3-dimensional brightness temperature fluctuations in the 21cm line of neutral hydrogen during the Epoch of Reionization (EoR) at redshifts from 6 to 10, solar imaging and remote sensing of the inner heliosphere via propagation effects on signals from distant background sources,and high-sensitivity exploration of the variable radio sky. The array design features 8192 dual-polarization broad-band active dipoles, arranged into 512 tiles comprising 16 dipoles each. The tiles are quasi-randomly distributed over an aperture 1.5km in diameter, with a small number of outliers extending to 3km. All tile-tile baselines are correlated in custom FPGA-based hardware, yielding a Nyquist-sampled instantaneous monochromatic uv coverage and unprecedented point spread function (PSF) quality. The correlated data are calibrated in real time using novel position-dependent self-calibration algorithms. The array is located in the Murchison region of outback Western Australia. This region is characterized by extremely low population density and a superbly radio-quiet environment,allowing full exploitation of the instrumental capabilities.
344 citations
TL;DR: The Atacama Large Millimeter/submillimeter Array (ALMA) as mentioned in this paper is an international radio telescope under construction in the atacama Desert of northern Chile with two arrays of high-precision antennas.
Abstract: The Atacama Large Millimeter/submillimeter Array (ALMA) is an international radio telescope under construction in the Atacama Desert of northern Chile. ALMA is situated on a dry site at 5000 m elevation, allowing excellent atmospheric transmission over the instrument wavelength range of 0.3 to 10 mm. ALMA will consist of two arrays of high-precision antennas. One, of up to 64 12-m diameter antennas, is reconfigurable in multiple patterns ranging in size from 150 meters up to ~15 km. A second array is comprised of a set of four 12-m and twelve 7-m antennas operating in one of two closely packed configurations ~50 m in diameter. The instrument will provide both interferometric and total-power astronomical information on atomic, molecular and ionized gas and dust in the solar system, our Galaxy, and the nearby to high-redshift universe. In this paper we outline the scientific drivers, technical challenges and planned progress of ALMA.
269 citations
TL;DR: An overview of the entire data mining process, from data collection through to the interpretation of results, concludes that, so long as one carefully selects an appropriate algorithm, and is guided by the astronomical problem at hand, data mining can be very much the powerful tool, and not the questionable black box.
Abstract: We review the current state of data mining and machine learning in astronomy. 'Data Mining' can have a somewhat mixed connotation from the point of view of a researcher in this field. If used correctly, it can be a powerful approach, holding the potential to fully exploit the exponentially increasing amount of available data, promising great scientific advance. However, if misused, it can be little more than the black-box application of complex computing algorithms that may give little physical insight, and provide questionable results. Here, we give an overview of the entire data mining process, from data collection through to the interpretation of results. We cover common machine learning algorithms, such as artificial neural networks and support vector machines, applications from a broad range of astronomy, emphasizing those where data mining techniques directly resulted in improved science, and important current and future directions, including probability density functions, parallel algorithms, petascale computing, and the time domain. We conclude that, so long as one carefully selects an appropriate algorithm, and is guided by the astronomical problem at hand, data mining can be very much the powerful tool, and not the questionable black box.
265 citations
TL;DR: The Gamma-Ray Burst Monitor (GBM) as mentioned in this paper uses an array of twelve sodium iodide scintillators and two bismuth germanate scintillation detectors to detect gamma rays from 8 keV to 40 MeV over the full unocculted sky.
Abstract: The Gamma-Ray Burst Monitor (GBM) will significantly augment the science return from the Fermi Observatory in the study of Gamma-Ray Bursts (GRBs). The primary objective of GBM is to extend the energy range over which bursts are observed downward from the energy range of the Large Area Telescope (LAT) on Fermi into the hard X-ray range where extensive previous data exist. A secondary objective is to compute burst locations on-board to allow re-orientiong the spacecraft so that the LAT can observe delayed emission from bright bursts. GBM uses an array of twelve sodium iodide scintillators and two bismuth germanate scintillators to detect gamma rays from ~8 keV to ~40 MeV over the full unocculted sky. The on-board trigger threshold is ~0.7 photons/cm2/s (50-300 keV, 1 s peak). GBM generates on-board triggers for ~250 GRBs per year.
202 citations
Posted Content•
TL;DR: In this article, the authors discuss the findings of the Joint Dark Energy Mission (JDEM) Figure of Merit (FoM) Science Working Group (SWG), the FoMSWG.
Abstract: These are the findings of the Joint Dark Energy Mission (JDEM) Figure of Merit (FoM) Science Working Group (SWG), the FoMSWG. JDEM is a space mission planned by NASA and the DOE for launch in the 2016 time frame. The primary mission is to explore the nature of dark energy. In planning such a mission, it is necessary to have some idea of knowledge of dark energy in 2016, and a way to quantify the performance of the mission. In this paper we discuss these issues.
Posted Content•
TL;DR: MPFIT as discussed by the authors is a port to IDL of the non-linear least squares fitting program MINPACK-1, which inherits the robustness of the original FORTRAN version of MINPAC, but is optimized for performance and convenience in IDL.
Abstract: MPFIT is a port to IDL of the non-linear least squares fitting program MINPACK-1. MPFIT inherits the robustness of the original FORTRAN version of MINPACK-1, but is optimized for performance and convenience in IDL. In addition to the main fitting engine, MPFIT, several specialized functions are provided to fit 1-D curves and 2-D images; 1-D and 2-D peaks; and interactive fitting from the IDL command line. Several constraints can be applied to model parameters, including fixed constraints, simple bounding constraints, and "tying" the value to another parameter. Several data weighting methods are allowed, and the parameter covariance matrix is computed. Extensive diagnostic capabilities are available during the fit, via a call-back subroutine, and after the fit is complete. Several different forms of documentation are provided, including a tutorial, reference pages, and frequently asked questions. The package has been translated to C and Python as well. The full IDL and C packages can be found at this http URL
TL;DR: In this paper, the vector vortex coronagraph was used to detect a brown dwarf companion 3000 times fainter than its host star (HR 7672) in the Ks band (centered at 2.15 microns), at an angular separation of 2.5 lb/d.
Abstract: High-contrast coronagraphy will be needed to image and characterize faint extra-solar planetary systems. Coronagraphy is a rapidly evolving field, and many enhanced alternatives to the classical Lyot coronagraph have been proposed in the past ten years. Here, we discuss the operation of the vector vortex coronagraph, which is one of the most efficient possible coronagraphs. We first present recent laboratory results, and then first light observations at the Palomar observatory. Our near-infrared H-band (centered at ~ 1.65 microns) and K-band (centered at ~ 2.2 microns) vector vortex devices demonstrated excellent contrast results in the lab, down to ~ 1e-6 at an angular separation of 3 lb/d. On sky, we detected a brown dwarf companion 3000 times fainter than its host star (HR 7672) in the Ks band (centered at ~2.15 microns), at an angular separation of ~ 2.5 lb/d. Current and next-generation high-contrast instruments can directly benefit from the demonstrated capabilities of such a vector vortex: simplicity, small inner working angle, high optical throughput (>90%), and maximal off-axis discovery space.
TL;DR: The design elements of the ATA, the cost savings made possible by the use of commercial off-the-shelf components, and the cost/performance tradeoffs that eventually enabled this first snapshot radio camera are summarized.
Abstract: The first 42 elements of the Allen Telescope Array (ATA-42) are beginning to deliver data at the Hat Creek Radio Observatory in Northern California. Scientists and engineers are actively exploiting all of the flexibility designed into this innovative instrument for simultaneously conducting surveys of the astrophysical sky and conducting searches for distant technological civilizations. This paper summarizes the design elements of the ATA, the cost savings made possible by the use of COTS components, and the cost/performance trades that eventually enabled this first snapshot radio camera. The fundamental scientific program of this new telescope is varied and exciting; some of the first astronomical results will be discussed.
Posted Content•
TL;DR: The reproducibility of the non X-ray background model depends on the event selection criteria (such as cut-off rigidity and energy band) and the integration time, and the 1sigma systematic error is estimated to be less than 3% (PIN 15--40 keV) and 1% (GSO 50--100 keV), for more than 10 ksec exposure as mentioned in this paper.
Abstract: Suzaku Hard X-ray Detector (HXD) achieved the lowest background level than any other previously or currently operational missions sensitive in the energy range of 10--600 keV, by utilizing PIN photodiodes and GSO scintillators mounted in the BGO active shields to reject particle background and Compton-scattered events as much as possible. Because it does not have imaging capability nor rocking mode for the background monitor, the sensitivity is limited by the reproducibility of the non X-ray background (NXB) model. We modeled the HXD NXB, which varies with time as well as other satellites with a low-earth orbit, by utilizing several parameters, including particle monitor counts and satellite orbital/attitude information. The model background is supplied as an event file in which the background events are generated by random numbers, and can be analyzed in the same way as the real data. The reproducibility of the NXB model depends on the event selection criteria (such as cut-off rigidity and energy band) and the integration time, and the 1sigma systematic error is estimated to be less than 3% (PIN 15--40 keV) and 1% (GSO 50--100 keV) for more than 10 ksec exposure.
Posted Content•
TL;DR: The National Astronomical Observatory (NAOJ) as mentioned in this paper is an inter-university institute serving as the national center for ground-based astronomy offering observational facilities covering the optical, infrared, radio wavelength domain.
Abstract: National Astronomical Observatory is an inter-university institute serving as the national center for ground based astronomy offering observational facilities covering the optical, infrared, radio wavelength domain. NAOJ also has solar physics and geo-lunar science groups collaborating with JAXA for space missions and a theoretical group with computer simulation facilities. The outline of NAOJ, its various unique facilities, and some highlights of recent science achievements are reviewed.
TL;DR: In this article, the authors present MHDEnzo, an extension of the cosmological code Enzo to include the effects magnetic fields through the ideal MHD approximation, using a higher order Godunov Riemann solver for the computation of interface fluxes.
Abstract: In this work, we present MHDEnzo, the extension of the cosmological code Enzo to include the effects magnetic fields through the ideal MHD approximation. We use a higher order Godunov Riemann solver for the computation of interface fluxes. We use two constrained transport methods to compute the electric field from those interface fluxes, which simultaneously advances the induction equation and maintains the divergence of the magnetic field. A third order divergence free reconstruction technique is used to interpolate the magnetic fields in the block structured AMR framework already extant in Enzo. This reconstruction also preserves the divergence of the magnetic field to machine precision. We use operator splitting to include gravity and cosmological expansion. We then present a series of cosmological and non cosmological tests problems to demonstrate the quality of solution resulting from this combination of solvers.
Posted Content•
TL;DR: In this paper, the MAGIC gamma-ray Cherenkov telescope has been upgraded with MARS, a ROOT-based code written in C++, which includes all the necessary algorithms to transform the raw data recorded by the telescopes into information about the physics parameters of the observed targets.
Abstract: With the commissioning of the second MAGIC gamma-ray Cherenkov telescope situated close to MAGIC-I, the standard analysis package of the MAGIC collaboration, MARS, has been upgraded in order to perform the stereoscopic reconstruction of the detected atmospheric showers. MARS is a ROOT-based code written in C++, which includes all the necessary algorithms to transform the raw data recorded by the telescopes into information about the physics parameters of the observed targets. An overview of the methods for extracting the basic shower parameters is presented, together with a description of the tools used in the background discrimination and in the estimation of the gamma-ray source spectra.
TL;DR: In this article, the authors present a system that takes as input an astronomical image, and returns as output the pointing, scale, and orientation of that image (the astrometric calibration or WCS information).
Abstract: We have built a reliable and robust system that takes as input an astronomical image, and returns as output the pointing, scale, and orientation of that image (the astrometric calibration or WCS information). The system requires no first guess, and works with the information in the image pixels alone; that is, the problem is a generalization of the "lost in space" problem in which nothing--not even the image scale--is known. After robust source detection is performed in the input image, asterisms (sets of four or five stars) are geometrically hashed and compared to pre-indexed hashes to generate hypotheses about the astrometric calibration. A hypothesis is only accepted as true if it passes a Bayesian decision theory test against a background hypothesis. With indices built from the USNO-B Catalog and designed for uniformity of coverage and redundancy, the success rate is 99.9% for contemporary near-ultraviolet and visual imaging survey data, with no false positives. The failure rate is consistent with the incompleteness of the USNO-B Catalog; augmentation with indices built from the 2MASS Catalog brings the completeness to 100% with no false positives. We are using this system to generate consistent and standards-compliant meta-data for digital and digitized imaging from plate repositories, automated observatories, individual scientific investigators, and hobbyists. This is the first step in a program of making it possible to trust calibration meta-data for astronomical data of arbitrary provenance.
TL;DR: The Coronagraphic Low Order Wavefront Sensor (CLOWFS) as mentioned in this paper produces a defocused image of a reflective focal plane ring to measure low-order aberrations.
Abstract: High contrast coronagraphic imaging of the immediate surrounding of stars requires exquisite control of low-order wavefront aberrations, such as tip-tilt (pointing) and focus. We propose an accurate, efficient and easy to implement technique to measure such aberrations in coronagraphs which use a focal plane mask to block starlight. The Coronagraphic Low Order Wavefront Sensor (CLOWFS) produces a defocused image of a reflective focal plane ring to measure low order aberrations. Even for small levels of wavefront aberration, the proposed scheme produces large intensity signals which can be easily measured, and therefore does not require highly accurate calibration of either the detector or optical elements. The CLOWFS achieves nearly optimal sensitivity and is immune from non-common path errors. This technique is especially well suited for high performance low inner working angle (IWA) coronagraphs. On phase-induced amplitude apodization (PIAA) type coronagraphs, it can unambiguously recover aberrations which originate from either side of the beam shaping introduced by the PIAA optics. We show that the proposed CLOWFS can measure sub-milliarcsecond telescope pointing errors several orders of magnitude faster than would be possible in the coronagraphic science focal plane alone, and can also accurately calibrate residual coronagraphic leaks due to residual low order aberrations. We have demonstrated 1e-3 lambda/D pointing stability in a laboratory demonstration of the CLOWFS on a PIAA type coronagraph.
TL;DR: The TMT site testing project has been described in detail in this paper, where the authors present the results of a series of analyses on the five candidates, Cerros Tolar, Armazones and Tolonchar in northern Chile, San Pedro Martir in Baja California, Mexico and the 13 North (13N) site on Mauna Kea, Hawaii.
Abstract: As part of the conceptual and preliminary design processes of the Thirty Meter Telescope (TMT), the TMT site testing team has spent the last five years measuring the atmospheric properties of five candidate mountains in North and South America with an unprecedented array of instrumentation. The site testing period was preceded by several years of analyses selecting the five candidates, Cerros Tolar, Armazones and Tolonchar in northern Chile; San Pedro Martir in Baja California, Mexico and the 13 North (13N) site on Mauna Kea, Hawaii. Site testing was concluded by the selection of two remaining sites for further consideration, Armazones and Mauna Kea 13N. It showed that all five candidates are excellent sites for an extremely large astronomical observatory and that none of the sites stands out as the obvious and only logical choice based on its combined properties. This is the first article in a series discussing the TMT site testing project.
Posted Content•
TL;DR: The specifications of the MeerKAT Karoo Array Telescope, the South African Square Kilometre Array Precursor is presented and the community is invited to submit proposals for Large Key Projects.
Abstract: We present the specifications of the MeerKAT Karoo Array Telescope, the South African Square Kilometre Array Precursor. Some of the key science for MeerKAT is described in this document. We invite the community to submit proposals for Large Key Projects.
TL;DR: GamER as discussed by the authors is a GPU-accelerated adaptive mesh refinement (AMR) code that improves the performance of AMR by a large factor with the use of the graphic processing unit (GPU).
Abstract: We present the newly developed code, GAMER (GPU-accelerated Adaptive MEsh Refinement code), which has adopted a novel approach to improve the performance of adaptive mesh refinement (AMR) astrophysical simulations by a large factor with the use of the graphic processing unit (GPU). The AMR implementation is based on a hierarchy of grid patches with an oct-tree data structure. We adopt a three-dimensional relaxing TVD scheme for the hydrodynamic solver, and a multi-level relaxation scheme for the Poisson solver. Both solvers have been implemented in GPU, by which hundreds of patches can be advanced in parallel. The computational overhead associated with the data transfer between CPU and GPU is carefully reduced by utilizing the capability of asynchronous memory copies in GPU, and the computing time of the ghost-zone values for each patch is made to diminish by overlapping it with the GPU computations. We demonstrate the accuracy of the code by performing several standard test problems in astrophysics. GAMER is a parallel code that can be run in a multi-GPU cluster system. We measure the performance of the code by performing purely-baryonic cosmological simulations in different hardware implementations, in which detailed timing analyses provide comparison between the computations with and without GPU(s) acceleration. Maximum speed-up factors of 12.19 and 10.47 are demonstrated using 1 GPU with 4096^3 effective resolution and 16 GPUs with 8192^3 effective resolution, respectively.
TL;DR: In this article, a method for characterizing and removing internal reflections between the CCD and other optical surfaces in an astronomical camera is presented. But the stellar reflections appear as out-of-focus images and are not necessarily axisymmetric about the star.
Abstract: We present a means of characterizing and removing internal reflections between the CCD and other optical surfaces in an astronomical camera. The stellar reflections appear as out-of-focus images and are not necessarily axisymmetric about the star. Using long exposures of very bright stars as calibration images we are able to measure the position, size, and intensity of reflections as a function of their position on the field. We also measure the extended stellar point-spread function out to one degree. Together this information can be used to create an empirical model of the excess light from bright stars and reduce systematic artifacts in deep surface photometry. We then reduce a set of deep observations of the Virgo cluster with our method to demonstrate its efficacy and to provide a comparison with other strategies for removing scattered light.
TL;DR: In this paper, a super-sampled point spread function of the low-resolution modules was used for spectral extraction of point-like sources adapted to the Infrared Spectrograph onboard the Spitzer Space Telescope.
Abstract: We present new advances in the spectral extraction of point-like sources adapted to the Infrared Spectrograph onboard the Spitzer Space Telescope For the first time, we created a super-sampled point spread function of the low-resolution modules We describe how to use the point spread function to perform optimal extraction of a single source and of multiple sources within the slit We also examine the case of the optimal extraction of one or several sources with a complex background The new algorithms are gathered in a plugin called Adopt which is part of the SMART data analysis software
TL;DR: In this paper, a beam combining concept using Integrated Optics (IO) technologies with a novel ABCD-like fringe encoding scheme was proposed for near-infrared long-baseline interferometry.
Abstract: The very recent years have seen a promising start in scientific publications making use of images produced by near-infrared long-baseline interferometry. The technique has reached, at last, a technical maturity level that opens new avenues for numerous astrophysical topics requiring milli-arcsecond model-independent imaging. The Very Large Telescope Interferometer (VLTI) is on the path to be equipped with instruments capable to combine between four to six telescopes. In the framework of the VLTI second generation instruments Gravity and VSI, we propose a new beam combining concept using Integrated Optics (IO) technologies with a novel ABCD-like fringe encoding scheme. Our goal is to demonstrate that IO-based combination brings considerable advantages in terms of instrumental design and performance. We therefore aim at giving a full characterization of an IO beam combiner to establish its performances and check its compliance with the specifications of an imaging instrument. Laboratory measurements were made in the H band with a dedicated testbed. We studied the beam combiners through the analysis of throughput, instrumental visibilities, phases and closure phases in wide band as well as with spectral dispersion. Study of the polarization properties is also done. We obtain competitive throughput, high and stable instrumental contrasts, stable but non-zero closure phases which we attribute to internal well calibrable optical path differences. We validate a new static and achromatic phase shifting IO function close to the nominal 90deg value. All these observables show limited chromaticity over the H band range. Our results demonstrate that such ABCD-like beam combiners are particularly well suited to achieve aperture synthesis imaging. This opens the way to extend to all near infrared wavelengths and in particular, the K band.
Posted Content•
TL;DR: In this article, the authors describe the current best knowledge of the Fermi Gamma-ray Space Telescope (LAT) and their plans towards releasing public response functions to support data release in year 2.
Abstract: The Large Area Telescope (LAT) on-board the Fermi Gamma-ray Space Telescope started nominal operations on August 13, 2008, after about 60 days of instrument checkout and commissioning and is currently performing an all-sky gamma-ray survey from 30 MeV to above 300 GeV with unprecedented sensitivity and angular resolution. The LAT pre-launch response was tuned using Monte Carlo simulations and test beam data from a campaign necessarily limited in scope. This suggested a conservative approach in dealing with systematics that affect the reconstruction analysis of the first months of data taking. The first major update of the instrument performance based on flight data is now being completed. Not only are the LAT calibrations now based on flight data, but also the ground event reconstruction has been updated to accommodate on-orbit calibrations, and response was carefully verified using real data from celestial sources. In this contribution we describe the current best knowledge of the instrument, and our plans towards releasing public response functions to support data release in year 2.
TL;DR: In this article, the authors review the relevant research activities aiming at the development of single-mode guided optics and corresponding manufacturing technologies and compare the experimentally achieved performance and compare it with the performance requirements for applications in various fields of astronomy.
Abstract: Research activities during the last decade have shown the strong potential of photonic devices to greatly simplify ground based and space borne astronomical instruments and to improve their performance. We focus specifically on the mid-infrared wavelength regime (about 5-20 microns), a spectral range offering access to warm objects (about 300 K) and to spectral features that can be interpreted as signatures for biological activity (e.g. water, ozone, carbon dioxide). We review the relevant research activities aiming at the development of single-mode guided optics and the corresponding manufacturing technologies. We evaluate the experimentally achieved performance and compare it with the performance requirements for applications in various fields of astronomy. Our goal is to show a perspective for future astronomical instruments based on mid-infrared photonic devices.
TL;DR: In this paper, the photometric precision of stellar light curves obtained by the CoRoT satellite in its planet finding channel, with a particular emphasis on the timescales characteristic of planetary transits, was studied.
Abstract: In this short paper, we study the photometric precision of stellar light curves obtained by the CoRoT satellite in its planet finding channel, with a particular emphasis on the timescales characteristic of planetary transits Together with other articles in the same issue of this journal, it forms an attempt to provide the building blocks for a statistical interpretation of the CoRoT planet and eclipsing binary catch to date
After pre-processing the light curves so as to minimise long-term variations and outliers, we measure the scatter of the light curves in the first three CoRoT runs lasting more than 1 month, using an iterative non-linear filter to isolate signal on the timescales of interest The bevhaiour of the noise on 2h timescales is well-described a power-law with index 025 in R-magnitude, ranging from 01mmag at R=115 to 1mmag at R=16, which is close to the pre-launch specification, though still a factor 2-3 above the photon noise due to residual jitter noise and hot pixel events There is evidence for a slight degradation of the performance over time We find clear evidence for enhanced variability on hours timescales (at the level of 05 mmag) in stars identified as likely giants from their R-magnitude and B-V colour, which represent approximately 60 and 20% of the observed population in the direction of Aquila and Monoceros respectively On the other hand, median correlated noise levels over 2h for dwarf stars are extremely low, reaching 005mmag at the bright end
TL;DR: In this paper, principal component analysis (PCA) is used to transform the system of correlated coordinates into a system of uncorrelated coordinates ordered by principal components of decreasing variance.
Abstract: Astronomy has evolved almost exclusively by the use of spectroscopic and imaging techniques, operated separately. With the development of modern technologies it is possible to obtain datacubes in which one combines both techniques simultaneously, producing images with spectral resolution. To extract information from them can be quite complex, and hence the development of new methods of data analysis is desirable. We present a method of analysis of datacube (data from single field observations, containing two spatial and one spectral dimension) that uses PCA (Principal Component Analysis) to express the data in the form of reduced dimensionality, facilitating efficient information extraction from very large data sets. PCA transforms the system of correlated coordinates into a system of uncorrelated coordinates ordered by principal components of decreasing variance. The new coordinates are referred to as eigenvectors, and the projections of the data onto these coordinates produce images we will call tomograms. The association of the tomograms (images) to eigenvectors (spectra) is important for the interpretation of both. The eigenvectors are mutually orthogonal and this information is fundamental for their handling and interpretation. When the datacube shows objects that present uncorrelated physical phenomena, the eigenvector's orthogonality may be instrumental in separating and identifying them. By handling eigenvectors and tomograms one can enhance features, extract noise, compress data, extract spectra, etc. We applied the method, for illustration purpose only, to the central region of the LINER galaxy NGC 4736, and demonstrate that it has a type 1 active nucleus, not known before. Furthermore we show that it is displaced from the centre of its stellar bulge.