Showing papers in "arXiv: Materials Science in 2006"

Detection of Individual Gas Molecules Absorbed on Graphene

Abstract: The ultimate aspiration of any detection method is to achieve such a level of sensitivity that individual quanta of a measured value can be resolved. In the case of chemical sensors, the quantum is one atom or molecule. Such resolution has so far been beyond the reach of any detection technique, including solid-state gas sensors hailed for their exceptional sensitivity. The fundamental reason limiting the resolution of such sensors is fluctuations due to thermal motion of charges and defects which lead to intrinsic noise exceeding the sought-after signal from individual molecules, usually by many orders of magnitude. Here we show that micrometre-size sensors made from graphene are capable of detecting individual events when a gas molecule attaches to or detaches from graphenes surface. The adsorbed molecules change the local carrier concentration in graphene one by one electron, which leads to step-like changes in resistance. The achieved sensitivity is due to the fact that graphene is an exceptionally low-noise material electronically, which makes it a promising candidate not only for chemical detectors but also for other applications where local probes sensitive to external charge, magnetic field or mechanical strain are required.

Magnetism in Graphene Induced by Single-Atom Defects

Abstract: We study from first principles the magnetism in graphene induced by single carbon atom defects. For two types of defects considered in our study, the hydrogen chemisorption defect and the vacancy defect, the itinerant magnetism due to the defect-induced extended states has been observed. Calculated magnetic moments are equal to 1 $\mu_B$ per hydrogen chemisorption defect and 1.12$-$1.53 $\mu_B$ per vacancy defect depending on the defect concentration. The coupling between the magnetic moments is either ferromagnetic or antiferromagnetic, depending on whether the defects correspond to the same or to different hexagonal sublattices of the graphene lattice, respectively. The relevance of itinerant magnetism in graphene to the high-$T_C$ magnetic ordering is discussed.

Calculated electronic and magnetic properties of the half-metallic, transition metal based Heusler compounds

Abstract: In this work, results of {\it ab-initio} band structure calculations for $A_2BC$ Heusler compounds that have $A$ and $B$ sites occupied by transition metals and $C$ by a main group element are presented. This class of materials includes some interesting half-metallic and ferromagnetic properties. The calculations have been performed in order to understand the properties of the minority band gap and the peculiar magnetic behavior found in these materials. Among the interesting aspects of the electronic structure of the materials are the contributions from both $A$ and $B$ atoms to states near the Fermi energy and to the total magnetic moment. The magnitude of the total magnetic moment, which depends as well on the kind of $C$ atoms, shows a trend consistent with the Slater-Pauling type behavior in several classes of these compounds. The localized moment in these magnetic compounds resides at the $B$ site. Other than in the classical Cu$_2$-based Heusler compounds, the $A$ atoms in Co$_2$, Fe$_2$, and Mn$_2$ based compounds may contribute pronounced to the total magnetic moment.

Carbon-doped ZnO: A New Class of Room Temperature Dilute Magnetic Semiconductor

Abstract: We report magnetism in carbon doped ZnO. Our first-principles calculations based on density functional theory predicted that carbon substitution for oxygen in ZnO results in a magnetic moment of 1.78 $\mu_B$ per carbon. The theoretical prediction was confirmed experimentally. C-doped ZnO films deposited by pulsed laser deposition with various carbon concentrations showed ferromagnetism with Curie temperatures higher than 400 K, and the measured magnetic moment based on the content of carbide in the films ($1.5 - 3.0 \mu_B$ per carbon) is in agreement with the theoretical prediction. The magnetism is due to bonding coupling between Zn ions and doped C atoms. Results of magneto-resistance and abnormal Hall effect show that the doped films are $n$-type semiconductors with intrinsic ferromagnetism. The carbon doped ZnO could be a promising room temperature dilute magnetic semiconductor (DMS) and our work demonstrates possiblity of produing DMS with non-metal doping.

Flow boundary conditions from nano- to micro-scales

Abstract: The development of microfluidic devices has recently revived the interest in "old" problems associated with transport at, or across, interfaces. As the characteristic sizes are decreased, the use of pressure gradients to transport fluids becomes problematic, and new, interface driven, methods must be considered. This has lead to new investigations of flow near interfaces, and to the conception of interfaces engineered at various scales to reduce flow friction. In this review, we discuss the present theoretical understanding of flow past solid interfaces at different length scales. We also briefly discuss the corresponding phenomenon of heat transport, and the influence of surface slip on interface driven (e.g. electro-osmotic) flows.

Giant electrocaloric effect in the thin film relaxor ferroelectric 0.9 PbMg_(1/3)Nb_(2/3)O_3 - 0.1 PbTiO_3 near room temperature

Abstract: We have recently observed a giant electrocaloric effect (12 K in 25 V) in 350 nm sol-gel Pb Zr_0.95 Ti_0.05 O_3 films near the ferroelectric Curie temperature of 242oC. Here we demonstrate a giant electrocaloric effect (5 K in 25 V) in 260 nm sol-gel films of the relaxor ferroelectric 0.9 PbMg_(1/3)Nb_(2/3)O_3 - 0.1 PbTiO_3 near the Curie temperature of 60oC. This reduction in operating temperature widens the potential for applications in novel cooling systems.

Highly-ordered graphene for two dimensional electronics

Abstract: With expanding interest in graphene-based electronics, it is crucial that high quality graphene films be grown. Sublimation of Si from the 4H-SiC(0001) Si-terminated) surface in ultrahigh vacuum is a demonstrated method to produce epitaxial graphene sheets on a semiconductor. In this paper we show that graphene grown from the SiC$(000\bar{1})$ (C-terminated) surface are of higher quality than those previously grown on SiC(0001). Graphene grown on the C-face can have structural domain sizes more than three times larger than those grown on the Si-face while at the same time reducing SiC substrate disorder from sublimation by an order of magnitude.

Negative oxygen vacancies in HfO$_2$ as charge traps in high-k stacks

Abstract: We calculated the optical excitation and thermal ionization energies of oxygen vacancies in m-HfO$_2$ using atomic basis sets, a non-local density functional and periodic supercell. The thermal ionization energies of negatively charged V$^-$ and V$^{2-}$ centres are consistent with values obtained by the electrical measurements. The results suggest that negative oxygen vacancies are the likely candidates for intrinsic electron traps in the hafnum-based gate stack devices.

Pressure-Induced Zero-Gap Semiconducting State in Organic Conductor $\alpha$-(BEDT-TTF)$_2$I$_3$ Salt

Abstract: We show a zero-gap semiconducting (ZGS) state in the quasi-two-dimensional organic conductor $\alpha$-(BEDT-TTF)$_2$I$_3$ salt, which emerges under uniaxial pressure along the a-axis (the stacking axis of the BEDT-TTF molecule). The ZGS state is the state in which a Dirac cone with the band spectrum of a linear dispersion exists around the Fermi point connecting an unoccupied (electron) band with an occupied (hole) band. The spectrum exhibits a large anisotropy in velocity, which depends on the direction from the Fermi point. By varying the magnitude of several transfer energies of a tight-binding model with four sites per unit cell, it is shown that the ZGS state exists in a wide pressure range, and is attributable to the large anisotropy of the transfer energies along the stacking axis.

Complex Precipitation Pathways in Multi-Component Alloys

Abstract: One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative diffusivity of solute atoms and on the relative driving forces involved. In Al-Zr-Sc alloys, atomic simulations based on first-principle calculations combined with various complementary experimental approaches working at different scales reveal a strongly inhomogeneous structure of the precipitates: owing to the much faster diffusivity of Sc compared with Zr in the solid solution, and to the absence of Zr and Sc diffusion inside the precipitates, the precipitate core is mostly Sc-rich, whereas the external shell is Zr-rich. This explains previous observations of an enhanced nucleation rate in Al-Zr-Sc alloys compared with binary Al-Sc alloys, along with much higher resistance to Ostwald ripening, two features of the utmost importance in the field of light high-strength materials.

Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite

Abstract: A filamentary composite elaborated by cold drawing was processed by High Pressure Torsion (HPT). The nanostructure resulting from this severe plastic deformation (SPD) was investigated thanks to scanning electron microscopy, transmission electron microscopy, X-ray diffraction and 3D atom probe. Although the mutual solubility of Cu and Fe is extremely low at room temperature in equilibrium conditions, it is shown that nanoscaled Fe clusters dissolve in the Cu matrix. The non-equilibrium copper supersaturated solid solutions contain up to 20at.% Fe. The driving force of the dissolution is attributed to capillary pressures and mechanisms which could enhanced the atomic mobility during HPT are discussed. We conclude that the interdiffusion is the result of a dramatic increase of the vacancy concentration during SPD.

Ab initio prediction of half-metallic properties for the ferromagnetic Heusler alloys Co$_2$MSi (M=Ti, V, Cr)

Abstract: By means of density functional calculations the magnetic and electronic properties and phase stabilities of the Heusler compounds Co$_2$MSi (with M=Ti, V, Cr, Mn, Fe, Co, Ni) were investigated. Based on the calculated results we predict the ferromagnetic phases of the compounds Co$_2$TiSi, Co$_2$VSi and Co$_2$CrSi to be half-metals. Of particular interest is Co$_2$CrSi because of its high density of majority spin states at Fermi energy in combination with a reasonably high estimated Curie temperature of 747K. The compounds Co$_2$TiSi and Co$_2$VSi are thermodynamically stable, whereas Co$_2$CrSi is a metastable phase which might be stabilized by suitable experimental techniques.

Molecular Dynamics Study of the Catalyst Particle Size Dependence on Carbon Nanotube Growth

Abstract: The molecular dynamics method, based on an empirical potential energy surface, was used to study the effect of catalyst particle size on the growth mechanism and structure of single-walled carbon nanotubes (SWNTs). The temperature for nanotube nucleation (800-1100 K), which occurs on the surface of the cluster, is similar to that used in catalyst chemical vapor deposition experiments, and the growth mechanism, which is described within the vapor-liquid-solid model, is the same for all cluster sizes studied here (iron clusters containing between 10 and 200 atoms were simulated). Large catalyst particles, that contain at least 20 iron atoms, nucleate SWNTs and have a far better tubular structure than SWNTs nucleated from smaller clusters. In addition, the SWNTs that grow from the larger clusters have diameters that are similar to the cluster diameter, whereas the smaller clusters, which have diameters less than 0.5 nm, nucleate nanotubes that are approximately 0.6-0.7 nm in diameter. This is in agreement with the experimental observations that SWNT diameters are similar to the catalyst particle diameter, and that the narrowest free-standing SWNT is 0.6-0.7 nm.

Influence of Similar Atom Substitution on Glass Formation in (La-Ce)-Al-Co Bulk Metallic Glasses

Abstract: The glass-formation range of bulk metallic glasses (BMGs) based on lanthanum and cerium was pinpointed in La-Al-Co, Ce-Al-Co and pseudo-ternary (La-Ce)-Al-Co system respectively by copper mold casting. Through the stepwise substitution of La for solvent Ce in (LaxCe1-x)65Al10Co25 alloys (0

Molecular-Spintronics: the art of driving spin through molecules

Abstract: Spintronics is the ability of injecting, manipulating and detecting electron spins into solid state systems. Molecular-electronics investigates the possibility of making electronic devices using organic molecules. Traditionally these two burgeoning areas have lived separate lives, but recently a growing number of experiments have indicated a possible pathway towards their integration. This is the playground for molecular-spintronics, where spin-polarized currents are carried through molecules, and in turn they can affect the state of the molecule. We review the most recent advances in molecular-spintronics. In particular we discuss how a fully quantitative theory for spin-transport in nanostructures can offer fundamental insights into the main factors affecting spin-transport at the molecular level, and can help in designing novel concept devices.

High-temperature ferromagnetism of $sp$ electrons in narrow impurity bands: Application to CaB$_6$

Abstract: Ferromagnetism with high Curie temperature $T_c$, well above room temperature, and very small saturation moment has been reported in various carbon and boron systems. It is argued that the magnetization must be very inhomogeneous with only a small fraction of the sample ferromagnetically ordered. It is shown that a possible source of high $T_c$ within the ferromagnetic regions is itinerant electrons occupying a narrow impurity band. Correlation effects do not reduce the effective interaction which enters the Stoner criterion in the same way as in a bulk band. It is also shown how, in the impurity band case, spin wave excitations may not be effective in lowering $T_c$ below its value given by Stoner theory. These ideas are applied to CaB$_6$ and a thorough review of the experimental situation in this material is given. It is suggested that the intrinsic magnetism of the B$_2$ and O$_2$ dimers might be exploited in suitable structures containing these elements.

Multicomponent Density-Functional Theory for Electrons and Nuclei

Abstract: We present a general multi-component density functional theory in which electrons and nuclei are treated completely quantum mechanically, without the use of a Born-Oppenheimer approximation. The two fundamental quantities in terms of which our theory is formulated are the nuclear N-body density and the electron density expressed in coordinates referring to the nuclear framework. For these two densities coupled Kohn-Sham equations are derived and the electron-nuclear correlation functional is analyzed in detail. The formalism is tested on the hydrogen molecule $H_2$ and its positive ion $H_2^+$ using several approximations for the electron-nuclear correlation functional.

Fracture strength and Young's modulus of ZnO nanowires

Abstract: The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 um were manipulated with an atomic force microscopy tip mounted on a nanomanipulator inside a scanning electron microscope. The fracture strain of (7.7 +- 0.8)% measured in the bending test was found close to the theoretical limit of 10% and revealed a strength about twice as high as in the tensile test. From the tensile experiments the Young's modulus could be measured to be within 30% of that of bulk ZnO, contrary to the lower values found in literature.

Microwave shielding of transparent and conducting single-walled carbon nanotube films

Abstract: The authors measured the transport properties of single-walled carbon nanotube (SWCNT) films in the microwave frequency range from 10 MHz to 30 GHz by using the Corbino reflection technique from temperatures of 20-400 K. Based on the real and imaginary parts of the microwave conductivity, they calculated the shielding effectiveness for various film thicknesses. Shielding effectiveness of 43 dB at 10 MHz and 28 dB at 10 GHz are found for films with 90% optical transmittance, which suggests that SWCNT films are promising as a type of transparent microwave shielding material. By combining their data with those from the literature, the conductivity of SWCNT films was established in a broad frequency range from dc to visible.

Recent progress with large-scale ab initio calculations: the CONQUEST code

Abstract: While the success of density functional theory (DFT) has led to its use in a wide variety of fields such as physics, chemistry, materials science and biochemistry, it has long been recognised that conventional methods are very inefficient for large complex systems, because the memory requirements scale as $N^2$ and the cpu requirements as $N^3$ (where $N$ is the number of atoms). The principles necessary to develop methods with linear scaling of the cpu and memory requirements with system size ($\mathcal{O}(N)$ methods) have been established for more than ten years, but only recently have practical codes showing this scaling for DFT started to appear. We report recent progress in the development of the \textsc{Conquest} code, which performs $\mathcal{O}(N)$ DFT calculations on parallel computers, and has a demonstrated ability to handle systems of over 10,000 atoms. The code can be run at different levels of precision, ranging from empirical tight-binding, through \textit{ab initio} tight-binding, to full \textit{ab initio}, and techniques for calculating ionic forces in a consistent way at all levels of precision will be presented. Illustrations are given of practical \textsc{Conquest} calculations in the strained Ge/Si(001) system.

Hydrogenation and Hydro-Carbonation and Etching of Single-Walled Carbon Nanotubes

Abstract: We present a systematic experimental investigation of the reactions between hydrogen plasma and single-walled carbon nanotubes (SWNTs) at various temperatures. Microscopy, infrared (IR) and Raman spectroscopy and electrical transport measurements are carried out to investigate the properties of SWNTs after hydrogenation. Structural deformations, drastically reduced electrical conductance and increased semiconducting nature of SWNTs upon sidewall hydrogenation are observed. These changes are reversible upon thermal annealing at 500C via dehydrogenation. Harsh plasma or high temperature reactions lead to etching of nanotube likely via hydro-carbonation. Smaller SWNTs are markedly less stable against hydro-carbonation than larger tubes. The results are fundamental and may have implications to basic and practical applications including hydrogen storage, sensing, band-gap engineering for novel electronics and new methods of manipulation, functionalization and etching of nanotubes.

Optical scattering resonances of single plasmonic nanoantennas

Abstract: We investigate the far-field optical resonances of individual dimer nanoantennas using confocal scattering spectroscopy. Experiments on a single-antenna array with varying arm lengths and interparticle gap sizes show large spectral shifts of the plasmon modes due to a combination of geometrical resonances and plasmon hybridization. All resonances are considerably broadened compared to those of small nanorods in the quasistatic limit, which we attribute to a greatly enhanced radiative damping of the antenna modes. The scattering spectra are compared with rigorous model calculations that demonstrate both the near-field and far-field characteristics of a half-wave antenna.

Band gap and band parameters of InN and GaN from quasiparticle energy calculations based on exact-exchange density-functional theory

Abstract: We have studied the electronic structure of InN and GaN employing G0W0 calculations based on exact-exchange density-functional theory. For InN our approach predicts a gap of 0.7 eV. Taking the Burnstein-Moss effect into account, the increase of the apparent quasiparticle gap with increasing electron concentration is in good agreement with the observed blue shift of the experimental optical absorption edge. Moreover, the concentration dependence of the effective mass, which results from the non-parabolicity of the conduction band, agrees well with recent experimental findings. Based on the quasiparticle band structure the parameter set for a 4x4 kp Hamiltonian has been derived.

Magnetoelectric effects of nanoparticulate Pb(Zr0.52Ti0.48)O3-NiFe2O4 composite films

Abstract: We fabricated Pb(Zr0.52Ti0.48)O3-NiFe2O4 composite films consisting of randomly dispersed NiFe2O4 nanoparticles in the Pb(Zr0.52Ti0.48)O3 matrix. The structural analysis revealed that the crystal axes of the NiFe2O4 nanoparticles are aligned with those of the ferroelectric matrix. The composite has good ferroelectric and magnetic properties. We measured the transverse and longitudinal components of the magnetoelectric voltage coefficient, which supports the postulate that the magnetoelectric effect comes from direct stress coupling between magnetostrictive NiFe2O4 and piezoelectric Pb(Zr0.52Ti0.48)O3 grains.

Orthorhombic Fddd Network in Diblock Copolymer Melts

Abstract: For the first time a Fddd network structure is found in a poly(styrene-b-isoprene) (S-I) diblock copolymer melts by using small-angle X-ray scattering and transmission electron microscope, as predicted by Tyler et al. by using calculations with self-consistent field theory for diblock copolymer melts. The phase diagram of the S-I exhibits the sequence of Disorder- Fddd-Lamellae with decreasing temperature. The measured unit cell parameters ratios (a,b,c) are (1:2.02:3.46), which agrees with the result of the theoretical calculation.

Substituting the main group element in cobalt - iron based Heusler alloys: Co$_2$FeAl$_{1-x}$Si$_x$

Abstract: This work reports about electronic structure calculations for the Heusler compound Co$_2$FeAl$_{1-x}$Si$_x$. Particular emphasis was put on the role of the main group element in this compound. The substitution of Al by Si leads to an increase of the number of valence electrons with increasing Si content and may be seen as electron-doping. Self-consistent electronic structure calculations were performed to investigate the consequences of the electron doping for the magnetic properties. The series Co$_2$FeAl$_{1-x}$Si$_x$ is found to exhibit half-metallic ferromagnetism and the magnetic moment follows the Slater-Pauling rule. It is shown that the electron-doping stabilises the gap in the minority states for $x=0.5$.

Inhomogeneous superconductivity and the "pseudogap state of novel superconductors

Abstract: Novel superconducting compounds such as the high Tc oxides are intrinsically inhomogeneous systems. An inhomogeneous structure is created by doping and the statistical nature of the distribution of dopants. Consequently, the critical temperature is spatially dependent: Tc = Tc (r).

Electronic structure and spectroscopy of the quaternary Heusler alloy Co$_2$Cr$_{1-x}$Fe$_{x}$Al

Abstract: Quaternary Heusler alloys Co$_2$Cr$_{1-x}$Fe$_{x}$Al with varying Cr to Fe ratio $x$ were investigated experimentally and theoretically. The electronic structure and spectroscopic properties were calculated using the full relativistic Korringa-Kohn-Rostocker method with coherent potential approximation to account for the random distribution of Cr and Fe atoms as well as random disorder. Magnetic effects are included by the use of spin dependent potentials in the local spin density approximation. Magnetic circular dichroism in X-ray absorption was measured at the $L_{2,3}$ edges of Co, Fe, and Cr of the pure compounds and the $x=0.4$ alloy in order to determine element specific magnetic moments. Calculations and measurements show an increase of the magnetic moments with increasing iron content. Resonant (560eV - 800eV) soft X-ray as well as high resolution - high energy ($\geq 3.5$keV) hard X-ray photo emission was used to probe the density of the occupied states in Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al.

Particle size dependence of magnetization and phase transition near T_N in multiferroic BiFeO3

Abstract: We report results of a comprehensive study of the phase transition at T_N (~643 K) as a function of particle size in multiferroic BiFeO3 system. We employed electrical, thermal, and temperature dependent X-ray diffraction (XRD) studies in order to characterize the transition in a host of samples. We also carried out detailed magnetic measurements over a temperature regime 2-300 K under a magnetic field 100-10000 Oe both on bulk and nano-crystalline systems. While in the bulk system a sharp endothermic peak at T_N together with a broad feature, ranging over nearly ~150 K (Delta_T), could be observed in calorimetry, the nanoscale systems exhibit only the broad feature. The characteristic dielectric anomaly, expected at T_N, is found to occur both at T_O and T_N across Delta_T in the bulk sample. The Maxwell-Wagner component due to interfaces between heterogenous regions with different conductivities is also present. The magnetic properties, measured at lower temperature, corroborate our observations in calorimetry. The metastability increases in the nanoscale BiFeO3 with divergence between zero-field cooled (ZFC) and field cooled (FC) magnetization below ~100 K and faster magnetic relaxation. Interestingly, in nanoscale BiFeO3, one also observes finite coercivity at lower temperature which points out that suitable design of particle size and shape may induce ferromagnetism. The inhomogeneous distribution of Bi/Fe-ions and/or oxygen non-stoichiometry seems to be giving rise to broad features in thermal, magnetic as well as in electrical responses.

Short-range exchange-correlation energy of a uniform electron gas with modified electron-electron interaction

Abstract: We calculate the short-range exchange-correlation energy of the uniform electron gas with two modified electron-electron interactions. While the short-range exchange functionals are calculated analytically, Coupled-Cluster and Fermi-hypernetted chain calculations are carried out for the correlation energy and the results are fitted to an analytical parametrization. These data enable to construct the local density approximation corresponding to these modified interactions.