Showing papers in "arXiv: Materials Science in 2008"

PEGylated Nano-Graphene Oxide for Delivery of Water Insoluble Cancer Drugs

Abstract: It is known that many potent, often aromatic drugs are water insoluble, which has hampered their use for disease treatment. In this work, we functionalized nano-graphene oxide (NGO), a novel graphitic material, with branched polyethylene glycol (PEG) to obtain a biocompatible NGO-PEG conjugate stable in various biological solutions, and used them for attaching hydrophobic aromatic molecules including a camptothecin (CPT) analog, SN38 non-covalently via pi-pi stacking. The resulting NGO-PEG-SN38 complex exhibited excellent water solubility while maintaining its high cancer cell killing potency similar to that of the free SN38 molecules in organic solvents. The efficacy of NGO-PEG-SN38 was far higher than that of irinotecan (CPT-11), a FDA approved water soluble SN38 prodrug used for the treatment of colon cancer. Our results showed that graphene is a novel class of material promising for biological applications including future in vivo cancer treatment with various aromatic, low-solubility drugs.

Nano-Graphene Oxide for Cellular Imaging and Drug Delivery

Abstract: Two-dimensional graphene offers interesting electronic, thermal and mechanical properties that are currently explored for advanced electronics, membranes and composites. Here we synthesize and explore the biological application of nano-graphene oxide NGO, single-layer graphene oxide sheets down to a few nanometers in lateral width. We develop functionalization chemistry to impart solubility and compatibility of NGO in biological environments. We obtain size separated pegylated NGO sheets that are soluble in buffers and serum without agglomeration. The NGO sheets are found to be photoluminescent in the visible and infrared regions. The intrinsic photoluminescence of NGO is used for live cell imaging in the near-infrared with little background. We found that simple physisorption via pi-stacking can be used for loading doxorubicin, a widely used cancer drug onto NGO functionalized with antibody for selective cancer cell killing in vitro. Owing to the small size, intrinsic optical properties, large specific surface area,low cost, and useful non-covalent interactions with aromatic drug molecules, NGO is a promising new material for biological and medical applications.

Liquid phase production of graphene by exfoliation of graphite in surfactant/water solutions

Abstract: We have demonstrated a method to disperse and exfoliate graphite to give graphene suspended in water-surfactant solutions. Optical characterisation of these suspensions allowed the partial optimisation of the dispersion process. Transmission electron microscopy showed the dispersed phase to consist of small graphitic flakes. More than 40% of these flakes had <5 layers with ~3% of flakes consisting of monolayers. These flakes are stabilised against reaggregation by Coulomb repulsion due to the adsorbed surfactant. However, the larger flakes tend to sediment out over ~6 weeks, leaving only small flakes dispersed. It is possible to form thin films by vacuum filtration of these dispersions. Raman and IR spectroscopic analysis of these films suggests the flakes to be largely free of defects and oxides. The deposited films are reasonably conductive and are semi-transparent. Further improvements may result in the development of cheap transparent conductors.

Drug delivery with carbon nanotubes for in vivo cancer treatment

Abstract: Chemically functionalized single-walled carbon nanotubes (SWNTs) have shown promise in tumor targeted accumulation in mice and exhibit biocompatibility, excretion and little toxicity. Here, we demonstrate in-vivo SWNT drug delivery for tumor suppression in mice. We conjugate paclitaxel (PTX), a widely used cancer chemotherapy drug to branched polyethylene-glycol (PEG) chains on SWNTs via a cleavable ester bond to obtain a water soluble SWNT-paclitaxel conjugate (SWNT-PTX). SWNT-PTX affords higher efficacy in suppressing tumor growth than clinical Taxol in a murine 4T1 breast-cancer model, owing to prolonged blood circulation and 10-fold higher tumor PTX uptake by SWNT delivery likely through enhanced permeability and retention (EPR). Drug molecules carried into the reticuloendothelial system are released from SWNTs and excreted via biliary pathway without causing obvious toxic effects to normal organs. Thus, nanotube drug delivery is promising for high treatment efficacy and minimum side effects for future cancer therapy with low drug doses.

Raman Spectroscopy of Graphene Edges

Abstract: Graphene edges are of particular interest, since their chirality determines the electronic properties. Here we present a detailed Raman investigation of graphene flakes with well defined edges oriented at different crystallographic directions. The position, width and intensity of G and D peaks at the edges are studied as a function of the incident light polarization. The D-band is strongest for light polarized parallel to the edge and minimum for perpendicular orientation. Raman mapping shows that the D peak is localized in proximity of the edge. The D to G ratio does not always show a significant dependence on edge orientation. Thus, even though edges can appear macroscopically smooth and oriented at well defined angles, they are not necessarily microscopically ordered.

Intrinsic Response of Graphene Vapor Sensors

Abstract: Graphene is a purely two-dimensional material that has extremely favorable chemical sensor properties. It is known, however, that conventional nanolithographic processing typically leaves a resist residue on the graphene surface, whose impact on the sensor characteristics of the system has not yet been determined. Here we show that the contamination layer both degrades the electronic properties of the graphene and masks graphene s intrinsic sensor responses. The contamination layer chemically dopes the graphene, enhances carrier scattering, and acts as an absorbent layer that concentrates analyte molecules at the graphene surface, thereby enhancing the sensor response. We demonstrate a cleaning process that verifiably removes the contamination on the device structure and allows the intrinsic chemical responses of graphene to be measured.

Chemical functionalization of graphene

Abstract: Experimental and theoretical results on chemical functionalization of graphene are reviewed. Using hydrogenated graphene as a model system, general principles of the chemical functionalization are formulated and discussed. It is shown that, as a rule, 100% coverage of graphene by complex functional groups (in contrast with hydrogen and fluorine) is unreachable. A possible destruction of graphene nanoribbons by fluorine is considered. The functionalization of infinite graphene and graphene nanoribbons by oxygen and by hydrofluoric acid is simulated step by step.

Charge Transport in Single Au|Alkanedithiol|Au Junctions: Coordination Geometries and Conformational Degrees of Freedom

Abstract: Recent STM molecular break-junction experiments have revealed multiple series of peaks in the conductance histograms of alkanedithiols. To resolve a current controversy, we present here an in-depth study of charge transport properties of Au|alkanedithiol|Au junctions. Conductance histograms extracted from our STM measurements unambiguously confirm features showing more than one set of junction configurations. Based on quantum chemistry calculations, we propose that certain combinations of different sulfur-gold couplings and trans/gauche conformations act as the driving agents. The present study may have implications for experimental methodology: whenever conductances of different junction conformations are not statistically independent, the conductance histogram technique can exhibit a single series only, even though a much larger abundance of microscopic realizations exists.

Metallic conduction at organic charge-transfer interfaces

Abstract: The electronic properties of interfaces between two different solids can differ strikingly from those of the constituent materials. For instance, metallic conductivity, and even superconductivity, have been recently discovered at interfaces formed by insulating transition metal oxides. Here we investigate interfaces between crystals of conjugated organic molecules, which are large gap undoped semiconductors, i.e. essentially insulators. We find that highly conducting interfaces can be realized with resistivity ranging from 1 to 30 kOhm square, and that, for the best samples, the temperature dependence of the conductivity is metallic. The observed electrical conduction originates from a large transfer of charge between the two crystals that takes place at the interface, on a molecular scale. As the interface assembly process is simple and can be applied to crystals of virtually any conjugated molecule, the conducting interfaces described here represent the first examples of a new class of electronic systems.

Epitaxial graphene transistors on SiC substrates

Abstract: This paper describes the behavior of top gated transistors fabricated using carbon, particularly epitaxial graphene on SiC, as the active material. In the past decade research has identified carbon-based electronics as a possible alternative to silicon-based electronics. This enthusiasm was spurred by high carbon nanotube carrier mobilities. However, nanotube production, placement, and control are all serious issues. Graphene, a thin sheet of graphitic carbon, can overcome some of these problems and therefore is a promising new electronic material. Although graphene devices have been built before, in this work we provide the first demonstration and systematic evaluation of arrays of a large number of transistors entirely produced using standard microelectronics methods. Graphene devices presented feature high-k dielectric, mobilities up to 5000 cm2/Vs and, Ion/Ioff ratios of up to 7, and are methodically analyzed to provide insight into the substrate properties. Typical of graphene, these micron-scale devices have negligible band gaps and therefore large leakage currents.

Raman spectra of epitaxial graphene on SiC and of epitaxial graphene transferred to SiO2

Abstract: Raman spectra were measured for mono-, bi- and trilayer graphene grown on SiC by solid state graphitization, whereby the number of layers was pre-assigned by angle-resolved ultraviolet photoemission spectroscopy. It was found that the only unambiguous fingerprint in Raman spectroscopy to identify the number of layers for graphene on SiC(0001) is the linewidth of the 2D (or D*) peak. The Raman spectra of epitaxial graphene show significant differences as compared to micromechanically cleaved graphene obtained from highly oriented pyrolytic graphite crystals. The G peak is found to be blue-shifted. The 2D peak does not exhibit any obvious shoulder structures but it is much broader and almost resembles a single-peak even for multilayers. Flakes of epitaxial graphene were transferred from SiC onto SiO2 for further Raman studies. A comparison of the Raman data obtained for graphene on SiC with data for epitaxial graphene transferred to SiO2 reveals that the G peak blue-shift is clearly due to the SiC substrate. The broadened 2D peak however stems from the graphene structure itself and not from the substrate.

Hydrogen Dissociation and Diffusion on Transition Metal(=Ti,Zr,V,Fe,Ru,Co,Rh,Ni,Pd,Cu,Ag)-doped Mg(0001) Surfaces

Abstract: The kinetics of hydrogen absorption by magnesium bulk is affected by two main activated processes: the dissociation of the H$_2$ molecule and the diffusion of atomic H into the bulk. In order to have fast absorption kinetics both activated processed need to have a low barrier. Here we report a systematic ab-initio density functional theory investigation of H$_2$ dissociation and subsequent atomic H diffusion on TM(=Ti,V,Zr,Fe,Ru,Co,Rh,Ni,Pd,Cu,Ag)-doped Mg(0001) surfaces. The calculations show that doping the surface with TM's on the left of the periodic table eliminates the barrier for the dissociation of the molecule, but the H atoms bind very strongly to the TM, therefore hindering diffusion. Conversely, TM's on the right of the periodic table don't bind H, however, they do not reduce the barrier to dissociate H$_2$ significantly. Our results show that Fe, Ni and Rh, and to some extent Co and Pd, are all exceptions, combining low activation barriers for both processes, with Ni being the best possible choice.

Changes in the electronic structure and properties of graphene induced by molecular charge-transfer

Abstract: Interaction with electron donor and acceptor molecules such as aniline and nitrobenzene brings about marked changes in the Raman spectrum and the electronic structure of graphene, prepared by the exfoliation of graphitic oxide.

Strong Suppression of Electrical Noise in Bilayer Graphene Nano Devices

Abstract: Low-frequency 1/f noise is ubiquitous, and dominates the signal-to-noise performance in nanodevices. Here we investigate the noise characteristics of single-layer and bilayer graphene nano-devices, and uncover an unexpected 1/f noise behavior for bilayer devices. Graphene is a single layer of graphite, where carbon atoms form a 2D honeycomb lattice. Despite the similar composition, bilayer graphene (two graphene monolayers stacked in the natural graphite order) is a distinct 2D system with a different band structure and electrical properties. In graphene monolayers, the 1/f noise is found to follow Hooge's empirical relation with a noise parameter comparable to that of bulk semiconductors. However, this 1/f noise is strongly suppressed in bilayer graphene devices, and exhibits an unusual dependence on the carrier density, different from most other materials. The unexpected noise behavior in graphene bilayers is associated with its unique band structure that varies with the charge distribution among the two layers, resulting in an effective screening of potential fluctuations due to external impurity charges. The findings here point to exciting opportunities for graphene bilayers in low-noise applications.

Nanoscale control of exchange bias with BiFeO3 thin films

Abstract: We demonstrate a direct correlation between the domain structure of multiferroic BiFeO3 thin films and exchange bias of Co0.9Fe0.1/BiFeO3 heterostructures. Two distinct types of interactions, an enhancement of the coercive field (exchange enhancement) and an enhancement of the coercive field combined with large shifts of the hysteresis loop (exchange bias), have been observed in these heterostructures, which depend directly on the type and crystallography of the nanoscale (2 nm) domain walls in the BiFeO3 film. We show that the magnitude of the exchange bias interaction scales with the length of 109 degree ferroelectric domain walls in the BiFeO3 thin films which have been probed via piezoresponse force microscopy and x-ray magnetic circular dichroism.

Small anisotropy, weak thermal fluctuations, and high field superconductivity in Co-doped iron pnictide Ba(Fe1-xCox)2As2

Abstract: We performed high-field magnetotransport and magnetization measurements on a single crystal of the 122-phase iron pnictide Ba(Fe1-xCox)2As2. Unlike the HTS cuprates and 1111-phase oxypnictides, Ba(Fe1-xCox)2As2 showed practically no broadening of the resistive transitions under magnetic fields up to 45 T. The mass anisotropy gamma = Hc2ab/Hc2c deduced from the slopes of the upper critical field dHc2ab/dT = 4.9T/K and dHc2c/dT = 2.5T/K decreases from ~2 near Tc, to ~1.5 at lower temperatures. We observed the irreversibility field close to Hc2, and a rather unusual symmetric volume pinning force curve Fp(H) suggestive of strong pinning nano-structure.

Tunable stress and controlled thickness modification in graphene by annealing

Abstract: Graphene has many unique properties which make it an attractive material for fundamental study as well as for potential applications. In this paper, we report the first experimental study of process-induced defects and stress in graphene using Raman spectroscopy and imaging. While defects lead to the observation of defect-related Raman bands, stress causes shift in phonon frequency. A compressive stress (as high as 2.1 GPa) was induced in graphene by depositing a 5 nm SiO2 followed by annealing, whereas a tensile stress (~ 0.7 GPa) was obtained by depositing a thin silicon capping layer. In the former case, both the magnitude of the compressive stress and number of graphene layers can be controlled or modified by the annealing temperature. As both the stress and thickness affect the physical properties of graphene, this study may open up the possibility of utilizing thickness and stress engineering to improve the performance of graphene-based devices. Local heating techniques may be used to either induce the stress or reduce the thickness selectively.

Optical absorption of divalent metal tungstates: Correlation between the band-gap energy and the cation ionic radius

Abstract: We have carried out optical-absorption and reflectance measurements at room temperature in single crystals of AWO4 tungstates (A = Ba, Ca, Cd, Cu, Pb, Sr, and Zn). From the experimental results their band-gap energy has been determined to be 5.26 eV (BaWO4), 5.08 eV (SrWO4), 4.94 eV (CaWO4), 4.15 eV (CdWO4), 3.9-4.4 eV (ZnWO4), 3.8-4.2 eV (PbWO4), and 2.3 eV (CuWO4). The results are discussed in terms of the electronic structure of the studied tungstates. It has been found that those compounds where only the s electron states of the A2+ cation hybridize with the O 2p and W 5d states (e.g BaWO4) have larger band-gap energies than those where also p, d, and f states of the A2+ cation contribute to the top of the valence band and the bottom of the conduction band (e.g. PbWO4). The results are of importance in view of the large discrepancies existent in prevoiusly published data.

Combinatorial discovery of a lead-free morphotropic phase boundary in a thin-film piezoelectric perovskite

Abstract: We report on the discovery of a lead-free morphotropic phase boundary in Sm doped BiFeO3 with a simple perovskite structure using the combinatorial thin film strategy. The boundary is a rhombohedral to pseudo-orthorhombic structural transition which exhibits a ferroelectric (FE) to antiferroelectric (AFE) transition at approximately Bi0.86Sm0.14FeO3 with dielectric constant and out-of-plane piezoelectric coefficient comparable to those of epitaxial (001) oriented Pb(Zr,Ti)O3 (PZT) thin films at the MPB. The discovered composition may be a strong candidate of a Pb-free piezoelectric replacement of PZT.

On the accuracy of DFT exchange-correlation functionals for H bonds in small water clusters II: The water hexamer and van der Waals interactions

Abstract: Second order Moeller-Plesset perturbation theory (MP2) at the complete basis set (CBS) limit and diffusion quantum Monte Carlo (DMC) are used to examine several low energy isomers of the water hexamer. Both approaches predict the so-called "prism" to be the lowest energy isomer, followed by "cage", "book", and "cyclic" isomers. The energies of the four isomers are very similar, all being within 10-15 meV/H2O. This reference data is then used to evaluate the performance of several density-functional theory (DFT) exchange-correlation (xc) functionals. A subset of the xc functionals tested for smaller water clusters [I: Santra et al., J. Chem. Phys. 127, 184104 (2007)] has been considered. Whilst certain functionals do a reasonable job at predicting the absolute dissociation energies of the various isomers (coming within 10-20 meV/H2O), none predict the correct energetic ordering of the four isomers, nor does any predict the correct low total energy isomer. All xc functionals tested either predict the book or cyclic isomers to have the largest dissociation energies. A many-body decomposition of the total interaction energies within the hexamers leads to the conclusion that the failure lies in the poor description of van der Waals (dispersion) forces in the xc functionals considered. It is shown that the addition of an empirical pairwise (attractive) C6/R6 correction to certain functionals allows for an improved energetic ordering of the hexamers. The relevance of these results to density-functional simulations of liquid water is also briefly discussed.

Bulk photonic metamaterial with hyperbolic dispersion

Abstract: In this work, we demonstrate a self-standing bulk three-dimensional metamaterial based on the network of silver nanowires in an alumina membrane. This constitutes an anisotropic effective medium with hyperbolic dispersion, which can be used in sub-diffraction imaging or optical cloaks. Highly anisotropic dielectric constants of the material range from positive to negative, and the transmitted laser beam shifts both toward the normal to the surface, as in regular dielectrics, and off the normal, as in anisotropic dielectrics with the refraction index smaller than one. The designed photonic metamaterial is the thickest reported in the literature, both in terms of its physical size 1cm x 1cm x 51 mm, and the number of vacuum wavelengths, N=61 at l=0.84 mm.

Linear and Nonlinear Optical constants of BiFeO_3

Abstract: Using spectroscopic ellipsometry, the refractive index and absorption versus wavelength of the ferroelectric antiferromagnet Bismuth Ferrite, BiFeO_3 is reported. The material has a direct band-gap at 442 nm wavelength (2.81 eV). Using optical second harmonic generation, the nonlinear optical coefficients were determined to be d_15/d_22 = 0.20 +/- 0.01, d_31/d_22 = 0.35 +/- 0.02, d_33/d_22 = -11.4 +/- 0.20 and |d_22| = 298.4 +/- 6.1 pm/V at a fundamental wavelength of 800 nm.

Colossal dielectric constant up to GHz at room temperature

Abstract: The search for new materials with extremely high ("colossal") dielectric constants, required for future electronics, is one of the most active fields of modern materials science. However, the applicability of the colossal-epsilon' materials, discovered so far, suffers from the fact that their dielectric constant, epsilon', only is huge in a limited frequency range below about 1 MHz. In the present report, we show that the dielectric properties of La15/8Sr1/8NiO4 surpass those of other materials. Especially, epsilon' retains its colossal magnitude of >10000 well into the GHz range. This material is prone to charge order and this spontaneous ordering process of the electronic subsystem can be assumed to play an important role in the generation of the observed unusual dielectric properties.

Origin of the energy bandgap in epitaxial graphene

Abstract: We studied the effect of quantum confinement on the size of the band gap in single layer epitaxial graphene. Samples with different graphene terrace sizes are studied by using low energy electron microscopy (LEEM) and angle-resolved photoemission spectroscopy (ARPES). The direct correlation between the terrace size extracted from LEEM and the gap size extracted from ARPES shows that quantum confinement alone cannot account for the large gap observed in epitaxial graphene samples.

Electron Transport in Silicon Nanowires: The Role of Acoustic Phonon Confinement and Surface Roughness Scattering

Abstract: We investigate the effects of electron and acoustic-phonon confinement on the low-field electron mobility of thin square silicon nanowires (SiNWs) that are surrounded by SiO$_2$ and gated. We employ a self-consistent Poisson-Schr\"{o}dinger-Monte Carlo solver that accounts for scattering due to acoustic phonons (confined and bulk), intervalley phonons, and the Si/SiO$_2$ surface roughness. The wires considered have cross sections between 3 $\times$ 3 nm$^2$ and 8 $\times$ 8 nm$^2$. For larger wires, as expected, the dependence of the mobility on the transverse field from the gate is pronounced. At low transverse fields, where phonon scattering dominates, scattering from confined acoustic phonons results in about a 10% decrease of the mobility with respect to the bulk phonon approximation. As the wire cross-section decreases, the electron mobility drops because the detrimental increase in both electron--acoustic phonon and electron--surface roughness scattering rates overshadows the beneficial volume inversion and subband modulation. For wires thinner than 5 $\times$ 5 nm$^2$, surface roughness scattering dominates regardless of the transverse field applied and leads to a monotonic decrease of the electron mobility with decreasing SiNWs cross section.

Simulation Studies of Nanomagnet-Based Architecture

Abstract: We report a simulation study on interacting ensembles of Co nanomagnets that can perform basic logic operations and propagate logic signals, where the state variable is the magnetization direction. Dipole field coupling between individual nanomagnets drives the logic functionality of the ensemble and coordinated arrangements of the nanomagnets allow for the logic signal to propagate in a predictable way. Problems with the integrity of the logic signal arising from instabilities in the constituent magnetizations are solved by introducing a biaxial anisotropy term to the Gibbs magnetic free energy of each nanomagnet. The enhanced stability allows for more complex components of a logic architecture capable of random combinatorial logic, including horizontal wires, vertical wires, junctions, fanout nodes, and a novel universal logic gate. Our simulations define the focus of scaling trends in nanomagnet-based logic and provide estimates of the energy dissipation and time per nanomagnet reversal.

Room temperature ferromagnetism in carbon-implanted ZnO

Abstract: Unexpected ferromagnetism has been observed in carbon doped ZnO films grown by pulsed laser deposition [Phys. Rev. Lett. 99, 127201 (2007)]. In this letter, we introduce carbon into ZnO films by ion implantation. Room temperature ferromagnetism has been observed. Our analysis demonstrates that (1) C-doped ferromagnetic ZnO can be achieved by an alternative method, i.e. ion implantation, and (2) the chemical involvement of carbon in the ferromagnetism is indirectly proven.

Acoustic metafluids

Abstract: Acoustic metafluids are defined as the class of fluids that allow one domain of fluid to acoustically mimic another, as exemplified by acoustic cloaks. It is shown that the most general class of acoustic metafluids are materials with anisotropic inertia and the elastic properties of what are known as pentamode materials. The derivation uses the notion of finite deformation to define the transformation of one region to another. The main result is found by considering energy density in the original and transformed regions. Properties of acoustic metafluids are discussed, and general conditions are found which ensure that the mapped fluid has isotropic inertia, which potentially opens up the possibility of achieving broadband cloaking.

A method for atomistic spin dynamics simulations: implementation and examples

Abstract: We present a method for performing atomistic spin dynamic simulations. A comprehensive summary of all pertinent details for performing the simulations such as equations of motions, models for including temperature, methods of extracting data and numerical schemes for performing the simulations is given. The method can be applied in a first principles mode, where all interatomic exchange is calculated self-consistently, or it can be applied with frozen parameters estimated from experiments or calculated for a fixed spin-configuration. Areas of potential applications to different magnetic questions are also discussed. The method is finally applied to one situation where the macrospin model breaks down; magnetic switching in ultra strong fields.

Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar

Abstract: In this paper, the influence of aggregate size and volume fraction on shrinkage induced micro-cracking and permeability of concrete and mortar was investigated. Nonlinear finite element analyses of model concrete and mortar specimens with regular and random aggregate arrangements were performed. The aggregate diameter was varied between 2 and 16 mm. Furthermore, a range of volume fractions between 0.1 and 0.5 was studied. The nonlinear analyses were based on a 2D lattice approach in which aggregates were simplified as monosized cylindrical inclusions. The analysis results were interpreted by means of crack length, crack width and change of permeability. The results show that increasing aggregate diameter (at equal volume fraction) and decreasing volume fraction (at equal aggregate diameter), increases crack width and consequently greatly increases permeability.