Showing papers in "arXiv: Materials Science in 2010"

Review of Best Practice Methods for Determining an Electrode Material's Performance for Ultracapacitors

Abstract: Ultracapacitors are rapidly being adopted for use for a wide range of electrical energy storage applications. While ultracapacitors are able to deliver high rates of charge and discharge, they are limited in the amount of energy stored. The capacity of ultracapacitors is largely determined by the electrode material and as a result, research to improve the performance of electrode materials has dramatically increased. While test methods for packaged ultracapacitors are well developed, it is often not feasible for the materials scientist to assemble full sized, packaged cells to test electrode materials. Methodology to reliably measure a material's performance for ultracapacitor electrode use is not well standardized with the different techniques currently being used yielding widely varying results. In this manuscript, we review the best practice test methods that accurately predict a materials performance, yet are flexible and quick enough to accommodate a wide range of material sample types and amounts.

Mn3O4-Graphene Hybrid as a High Capacity Anode Material for Lithium Ion Batteries

Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.

Oxidation resistance of graphene-coated Cu and Cu/Ni alloy

Abstract: The ability to protect refined metals from reactive environments is vital to many industrial and academic applications. Current solutions, however, typically introduce several negative effects, including increased thickness and changes in the metal physical properties. In this paper, we demonstrate for the first time the ability of graphene films grown by chemical vapor deposition to protect the surface of the metallic growth substrates of Cu and Cu/Ni alloy from air oxidation. SEM, Raman spectroscopy, and XPS studies show that the metal surface is well protected from oxidation even after heating at 200 \degree C in air for up to 4 hours. Our work further shows that graphene provides effective resistance against hydrogen peroxide. This protection method offers significant advantages and can be used on any metal that catalyzes graphene growth.

Fluorographene: Two Dimensional Counterpart of Teflon

Abstract: We report a stoichiometric derivative of graphene with a fluorine atom attached to each carbon. Raman, optical, structural, micromechanical and transport studies show that the material is qualitatively different from the known graphene-based nonstoichiometric derivatives. Fluorographene is a high-quality insulator (resistivity >10^12 Ohm per square) with an optical gap of 3 eV. It inherits the mechanical strength of graphene, exhibiting Young's modulus of 100 N/m and sustaining strains of 15%. Fluorographene is inert and stable up to 400C even in air, similar to Teflon.

Simple models for dynamic hysteresis loops calculation: Application to hyperthermia optimization

Abstract: To optimize the heating properties of magnetic nanoparticles (MNPs) in magnetic hyperthermia applications, it is necessary to calculate the area of their hysteresis loops in an alternating magnetic field. The three types of theories suitable for describing the hysteresis loops of MNPs are presented and compared to numerical simulations: equilibrium functions, Stoner-Wohlfarth model based theories (SWMBTs) and linear response theory (LRT). Suitable formulas to calculate the hysteresis area of major cycles are deduced from SWMBTs and from numerical simulations; the domain of validity of the analytical formula is explicitly studied. In the case of minor cycles, the hysteresis area calculations are based on the LRT. A perfect agreement between LRT and numerical simulations of hysteresis loops is obtained. The domain of validity of the LRT is explicitly studied. Formulas to calculate the hysteresis area at low field valid for any anisotropy of the MNP are proposed. Numerical simulations of the magnetic field dependence of the area show it follows power-laws with a large range of exponents. Then, analytical expressions derived from LRT and SWMBTs are used for a theoretical study of magnetic hyperthermia. It is shown that LRT is only pertinent for MNPs with strong anisotropy and that SWMBTs should be used for weak anisotropy MNPs. The optimum volume of MNPs for magnetic hyperthermia as function of material and experimental parameters is derived. The maximum specific absorption rate (SAR) achievable is calculated versus the MNP anisotropy. It is shown that an optimum anisotropy increases the SAR and reduces the detrimental effects of size distribution. The optimum anisotropy is simple to calculate and depends on the magnetic field used in the hyperthermia experiments and on the MNP magnetization only. The theoretical optimum parameters are compared to the one of several magnetic materials.

Polymer-Fullerene Bulk Heterojunction Solar Cells

Abstract: Organic solar cells have the potential to be low-cost and efficient solar energy converters, with a promising energy balance. They are made from carbon-based semiconductors, which exhibit favourable light absorption and charge generation properties, and can be manufactured by low temperature processes such as printing from solvent-based inks, which are compatible with flexible plastic substrates or even paper. In this review, we will present an overview of the physical function of organic solar cells, their state-of-the-art performance and limitations, as well as novel concepts to achieve a better material stability and higher power conversion efficiencies. We will also briefly review processing and cost in view of the market potential.

Nanocrystal Growth on Graphene with Various Degrees of Oxidation

Abstract: We show a general two-step method to grow hydroxide and oxide nanocrystals of the iron family elements (Ni, Co, Fe) on graphene with two degrees of oxidation. Drastically different nanocrystal growth behaviors were observed on low-oxidation graphene sheets (GS) and highly oxidized graphite oxide (GO) in hydrothermal reactions. Small particles pre-coated on GS with few oxygen-containing surface groups diffused and recrystallized into single-crystalline nickel hydroxide Ni(OH)2 hexagonal nanoplates or iron oxide Fe2O3 nanorods with well defined morphologies. In contrast, particles pre-coated on GO were pinned by the high-concentration oxygen groups and defects on GO without recrystallization into well-defined shapes. Adjusting reaction temperature can be combined to further control materials grown on graphene. For materials with weak interactions with graphene, increasing the reaction temperature can lead to diffusion and recrystallization of surface species into larger crystals even on highly oxidized and defective GO. Our results suggest an interesting new approach to controlling the morphology of nanomaterials grown on graphene by tuning the surface chemistry of graphene as substrates for crystal nucleation and growth.

Robust isothermal electric switching of interface magnetization: A route to voltage-controlled spintronics

Abstract: Roughness-insensitive and electrically controllable magnetization at the (0001) surface of antiferromagnetic chromia is observed using magnetometry and spin-resolved photoemission measurements and explained by the interplay of surface termination and magnetic ordering. Further, this surface in placed in proximity with a ferromagnetic Co/Pd multilayer film. Exchange coupling across the interface between chromia and Co/Pd induces an electrically controllable exchange bias in the Co/Pd film, which enables a reversible isothermal (at room temperature) shift of the global magnetic hysteresis loop of the Co/Pd film along the magnetic field axis between negative and positive values. These results reveal the potential of magnetoelectric chromia for spintronic applications requiring non-volatile electric control of magnetization.

Mechanical and Electronic Properties of MoS$_2$ Nanoribbons and Their Defects

Abstract: We present our study on atomic, electronic, magnetic and phonon properties of one dimensional honeycomb structure of molybdenum disulfide (MoS$_2$) using first-principles plane wave method. Calculated phonon frequencies of bare armchair nanoribbon reveal the fourth acoustic branch and indicate the stability. Force constant and in-plane stiffness calculated in the harmonic elastic deformation range signify that the MoS$_2$ nanoribbons are stiff quasi one dimensional structures, but not as strong as graphene and BN nanoribbons. Bare MoS$_2$ armchair nanoribbons are nonmagnetic, direct band gap semiconductors. Bare zigzag MoS$_2$ nanoribbons become half-metallic as a result of the (2x1) reconstruction of edge atoms and are semiconductor for minority spins, but metallic for the majority spins. Their magnetic moments and spin-polarizations at the Fermi level are reduced as a result of the passivation of edge atoms by hydrogen. The functionalization of MoS$_2$ nanoribbons by adatom adsorption and vacancy defect creation are also studied. The nonmagnetic armchair nanoribbons attain net magnetic moment depending on where the foreign atoms are adsorbed and what kind of vacancy defect is created. The magnetization of zigzag nanoribbons due to the edge states is suppressed in the presence of vacancy defects.

Accurate and efficient algorithm for Bader charge integration

Abstract: We propose an efficient, accurate method to integrate the basins of attraction of a smooth function defined on a general discrete grid, and apply it to the Bader charge partitioning for the electron charge density. Starting with the evolution of trajectories in space following the gradient of charge density, we derive an expression for the fraction of space neighboring each grid point that flows to its neighbors. This serves as the basis to compute the fraction of each grid volume that belongs to a basin (Bader volume), and as a weight for the discrete integration of functions over the Bader volume. Compared with other grid-based algorithms, our approach is robust, more computationally efficient with linear computational effort, accurate, and has quadratic convergence. Moreover, it is straightforward to extend to non-uniform grids, such as from a mesh-refinement approach, and can be used to both identify basins of attraction of fixed points and integrate functions over the basins.

Functionalization of Single Layer MoS$_2$ Honeycomb Structures

Abstract: Based on the first-principles plane wave calculations, we studied the functionalization of the two-dimensional single layer MoS$_2$ structure via adatom adsorption and vacancy defect creation. Minimum energy adsorption sites are determined for sixteen different adatoms, each gives rise to diverse properties. Bare, single layer MoS$_2$, which is normally a nonmagnetic, direct band gap semiconductor, attains a net magnetic moment upon adsorption of specific transition metal atoms, as well as silicon and germanium atoms. The localized donor and acceptor states in the band gap expand the utilization of MoS$_2$ in nanoelectronics and spintronics. Specific adatoms, like C and O, attain significant excess charge upon adsorption to single layer MoS$_{2}$ which may be useful for its tribological applications. Each MoS$_{2}$-triple vacancy created in a single layer MoS$_{2}$ gives rise to a net magnetic moment, while other vacancy defects related with Mo and S atoms do not influence the nonmagnetic ground state. Present results are also relevant for the surface of graphitic MoS$_2$.

O-vacancy as the origin of negative bias illumination stress instability in amorphous In-Ga-Zn-O thin film transistors

Abstract: We find that O-vacancy (Vo) acts as a hole trap and play a role in negative bias illumination stress instability in amorphous In-Ga-Zn-O thin film transistors. Photo-excited holes drifted toward the channel/dielectric interface due to small potential barriers and can be captured by Vo in the dielectrics. While Vo(+2) defects are very stable at room temperature, their original deep states are recovered via electron capture upon annealing. We also find that Vo(+2) can diffuse in amorphous phase, including hole accumulation near the interface under negative gate bias.

Creation and control of a two-dimensional electron liquid at the bare SrTiO3 surface

Abstract: Many-body interactions in transition-metal oxides give rise to a wide range of functional properties, such as high-temperature superconductivity, colossal magnetoresistance, or multiferroicity. The seminal recent discovery of a two-dimensional electron gas (2DEG) at the interface of the insulating oxides LaAlO3 and SrTiO3 represents an important milestone towards exploiting such properties in all-oxide devices. This conducting interface shows a number of appealing properties, including a high electron mobility, superconductivity, and large magnetoresistance and can be patterned on the few-nanometer length scale. However, the microscopic origin of the interface 2DEG is poorly understood. Here, we show that a similar 2DEG, with an electron density as large as 8x10^13 cm^-2, can be formed at the bare SrTiO3 surface. Furthermore, we find that the 2DEG density can be controlled through exposure of the surface to intense ultraviolet (UV) light. Subsequent angle-resolved photoemission spectroscopy (ARPES) measurements reveal an unusual coexistence of a light quasiparticle mass and signatures of strong many-body interactions.

The structure of graphite oxide: Investigation of its surface chemical groups

Abstract: The structure of graphite oxide (GO) has been systematically studied using various tools such as SEM, TEM, XRD, Fourier transform infrared spectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), 13C solid state NMR, and O K-edge X-ray absorption near edge structure (XANES). The TEM data reveal that GO consists of amorphous and crystalline phases. The XPS data show that some carbon atoms have sp3 orbitals and others have sp2 orbitals. The ratio of sp2 to sp3 bonded carbon atoms decreases as sample preparation times increase. The 13C solid-state NMR spectra of GO indicate the existence of -OH and -O- groups for which peaks appear at 60 and 70 ppm, respectively. FT-IR results corroborate these findings. The existence of ketone groups is also implied by FT-IR, which is verified by O K-edge XANES and 13C solid-state NMR. We propose a new model for GO based on the results; -O-, -OH, and -C=O groups are on the surface.

Contact resistivity and current flow path at metal/graphene contact

Abstract: The contact properties between metal and graphene were examined. The electrical measurement on a multiprobe device with different contact areas revealed that the current flow preferentially entered graphene at the edge of the contact metal. The analysis using the cross-bridge Kelvin structure (CBK) suggested that a transition from the edge conduction to area conduction occurred for a contact length shorter than the transfer length of ~1 micron. The contact resistivity for Ni was measured as ~5*10-6 Ohmcm2 using the CBK. A simple calculation suggests that a contact resistivity less than 10-9 Ohmcm2 is required for miniaturized graphene field effect transistors.

Spin dynamics in semiconductors

Abstract: This article reviews the current status of spin dynamics in semiconductors which has achieved a lot of progress in the past years due to the fast growing field of semiconductor spintronics. The primary focus is the theoretical and experimental developments of spin relaxation and dephasing in both spin precession in time domain and spin diffusion and transport in spacial domain. A fully microscopic many-body investigation on spin dynamics based on the kinetic spin Bloch equation approach is reviewed comprehensively.

Pt-Decorated PdCo@Pd/C Core-Shell Nanoparticles with Enhanced Stability and Electrocatalytic Activity for Oxygen Reduction Reaction

Abstract: A simple method for the preparation of PdCo@Pd core-shell nanoparticles supported on carbon has been developed using an adsorbate-induced surface segregation effect. The stability and electrocatalytic activity for the oxygen reduction of PdCo@Pd nanoparticles was enhanced by a small amount of Pt, deposited via a spontaneous displacement reaction. The facile method described herein is suitable for large-scale lower cost production and significantly lowers the Pt loading and thus cost. The as-prepared PdCo@Pd and Pd-decorated PdCo@Pd nanocatalysts have higher methanol-tolerance for the ORR when compared to Pt/C, and are promising cathode catalysts for fuel cell applications.

First Principles Studies on 3-Dimentional Strong Topological Insulators: Bi2Te3, Bi2Se3 and Sb2Te3

Abstract: Bi2Se3, Bi2Te3 and Sb2Te3 compounds are recently predicted to be 3-dimentional (3D) strong topological insulators. In this paper, based on ab-initio calculations, we study in detail the topological nature and the surface states of this family compounds. The penetration depth and the spin-resolved Fermi surfaces of the surface states will be analyzed. We will also present an procedure, from which highly accurate effective Hamiltonian can be constructed, based on projected atomic Wannier functions (which keep the symmetries of the systems). Such Hamiltonian can be used to study the semi-infinite systems or slab type supercells efficiently. Finally, we discuss the 3D topological phase transition in Sb2(Te1-xSex)3 alloy system.

Compression Behavior of Single-layer Graphene

Abstract: Central to most applications involving monolayer graphene is its mechanical response under various stress states. To date most of the work reported is of theoretical nature and refers to tension and compression loading of model graphene. Most of the experimental work is indeed limited to bending of single flakes in air and the stretching of flakes up to typically ~1% using plastic substrates. Recently we have shown that by employing a cantilever beam we can subject single graphene into various degrees of axial compression. Here we extend this work much further by measuring in detail both stress uptake and compression buckling strain in single flakes of different geometries. In all cases the mechanical response is monitored by simultaneous Raman measurements through the shift of either the G or 2D phonons of graphene. In spite of the infinitely small thickness of the monolayers, the results show that graphene embedded in plastic beams exhibit remarkable compression buckling strains. For large length (l)-to-width (w) ratios (> 0.2) the buckling strain is of the order of -0.5% to -0.6%. However, for l/w <0.2 no failure is observed for strains even higher than -1%. Calculations based on classical Euler analysis show that the buckling strain enhancement provided by the polymer lateral support is more than six orders of magnitude compared to suspended graphene in air.

Clar's Theory, STM Images, and Geometry of Graphene Nanoribbons

Abstract: We show that Clar's theory of the aromatic sextet is a simple and powerful tool to predict the stability, the \pi-electron distribution, the geometry, the electronic/magnetic structure of graphene nanoribbons with different hydrogen edge terminations. We use density functional theory to obtain the equilibrium atomic positions, simulated scanning tunneling microscopy (STM) images, edge energies, band gaps, and edge-induced strains of graphene ribbons that we analyze in terms of Clar formulas. Based on their Clar representation, we propose a classification scheme for graphene ribbons that groups configurations with similar bond length alternations, STM patterns, and Raman spectra. Our simulations show how STM images and Raman spectra can be used to identify the type of edge termination.

Vacancy ordering and electronic structure of gamma-Fe2O3 (maghemite): a theoretical investigation

Abstract: The crystal structure of the iron oxide gamma-Fe2O3 is usually reported in either the cubic system (space group P4332) with partial Fe vacancy disorder or in the tetragonal system (space group P41212) with full site ordering and c/a\approx 3. Using a supercell of the cubic structure, we obtain the spectrum of energies of all the ordered configurations which contribute to the partially disordered P4332 cubic structure. Our results show that the configuration with space group P41212 is indeed much more stable than the others, and that this stability arises from a favourable electrostatic contribution, as this configuration exhibits the maximum possible homogeneity in the distribution of iron cations and vacancies. Maghemite is therefore expected to be fully ordered in equilibrium, and deviations from this behaviour should be associated with metastable growth, extended anti-site defects and surface effects in the case of small nanoparticles. The confirmation of the ordered tetragonal structure allows us to investigate the electronic structure of the material using density functional theory (DFT) calculations. The inclusion of a Hubbard (DFT+U) correction allows the calculation of a band gap in good agreement with experiment. The value of the gap is dependent on the electron spin, which is the basis for the spin-filtering properties of maghemite.

Crystal structure prediction using the Minima Hopping method

Abstract: A structure prediction method is presented based on the Minima Hopping method. Optimized moves on the configurational enthalpy surface are performed to escape local minima using variable cell shape molecular dynamics by aligning the initial atomic and cell velocities to low curvature directions of the current minimum. The method is applied to both silicon crystals and binary Lennard-Jones mixtures and the results are compared to previous investigations. It is shown that a high success rate is achieved and a reliable prediction of unknown ground state structures is possible.

Low-Symmetry Monoclinic Phases and Polarization Rotation Path Mediated By Epitaxial Strain in Multiferroic BiFeO3 Thin Films

Abstract: A morphotropic phase boundary driven by epitaxial strain has been observed in a lead-free multiferroic BiFeO3 thin films and the strain-driven phase transitions were widely reported to be iso-symmetric Cc-Cc ones by recent works. In this paper, we suggest that the tetragonal-like BiFeO3 phase identified in epitaxial films on (001) LaAlO3 single crystal substrates is monoclinic MC. This MC phase is different from MA type monoclinic phase reported in BiFeO3 films grown on low mismatch substrates, such as SrTiO3. This is confirmed not only by synchrotron x-ray studies but also by piezoresponse force microscopy measurements. The polarization vectors of the tetragonal-like phase lie in the (100) plane, not the (110) plane as previously reported. A phenomenological analysis was proposed to explain the formation of MC Phase. Such a low symmetry MC phase, with its linkage to MA phase and the multiphase coexistence open an avenue for large piezoelectric response in BiFeO3 films and shed light on a complete understanding towards possible polarization rotation paths and enhanced multiferroicity in BiFeO3 films mediated by epitaxial strain. This work may also aid the understanding of developing new lead-free strain-driven morphotropic phase boundary in other ferroic systems.

Elucidating the Bimodal Acid-base Behavior of the Water-silica Interface from First Principles

Abstract: Understanding the acid-base behavior of silica surfaces is critical for many nanoscience and bio-nano interface applications. Silanol groups (SiOH) on silica surfaces exhibit two acidity constants--one as acidic as vinegar--but their structural basis remains controversial. The atomic details of the more acidic silanol site govern not just the overall surface charge density at near neutral solution pH, but also how ions and bio-molecules interacts with and bind to silica immersed in water. Using initio molecular dynamics simulations and multiple representative crystalline silica surfaces, we determine the deprotonation free energies of silanol groups with different structural motifs. We show that previously proposed motifs related to chemical connectivity or inter-silanol hydrogen bonds do not yield high acidity. Instead, a plausible candiate for pKa=4.5 silanol groups may be found in locally strained or defected regions with sparse silanol coverage. In the process, irreversible ring-opening reactions of strained silica trimer rings in contact with liquid water are observed.

Silicon nanowire band gap modification

Abstract: Band gap modification for small-diameter (1 nm) silicon nanowires resulting from the use of different species for surface termination is investigated by density functional theory calculations. Because of quantum confinement, small-diameter wires exhibit a direct band gap that increases as the wire diameter narrows, irrespective of surface termination. This effect has been observed in previous experimental and theoretical studies for hydrogenated wires. For a fixed cross-section, the functional group used to saturate the silicon surface significantly modifies the band gap, resulting in relative energy shifts of up to an electronvolt. The band gap shifts are traced to details of the hybridization between the silicon valence band and the frontier orbitals of the terminating group, which is in competition with quantum confinement.

Light-induced size changes in BiFeO3 crystals

Abstract: Multifunctional oxides are promising materials because of their fundamental physical properties as well as their potential in applications1. Among these materials, multiferroics exhibiting ferroelectricity and magnetism are good candidates for spin electronic applications using the magnetoelectric effect, which couples magnetism and ferroelecticity. Furthermore, because ferroelectrics are insulators with a reasonable bandgap, photons can efficiently interact with electrons leading to photoconduction or photovoltaic effects. However, until now, coupling of light with mechanical degrees of freedom has been elusive, although ferroelasticity is a well-known property of these materials. Here, we report on the observation, for the first time, of a substantial visiblelight- induced change in the dimensions of BiFeO3 crystals at room temperature. The relative light-induced photostrictive effect is of the order of 10e-5 with response times below 0.1s. It depends on the polarization of incident light as well as applied magnetic fields. This opens the perspective of combining mechanical, magnetic, electric and optical functionalities in future generations of remote switchable devices.

Violation of Fourier's Law and Anomalous Heat Diffusion in Silicon

Abstract: We study heat conduction and diffusion in silicon nanowires (SiNWs) systematically by using non-equilibrium molecular dynamics It is found that the thermal conductivity of SiNWs diverges with the length, even when the length is up to 1,100 nm which is much longer than the phonon mean free path Moreover, an anomalous heat diffusion is observed which is believed to be responsible for the length dependent thermal conductivity Our results provide strong evidence that Fourier's law of heat conduction is not valid in low dimensional nanostructures

Crystal Symmetry Breaking in Few-Quintuple Bismuth Telluride Films: Applications in Nanometrology of Topological Insulators

Abstract: We report results of micro-Raman spectroscopy investigation of the "graphene-like" mechanically exfoliated single-crystal bismuth telluride films with the thickness ranging from a few-nm-range to bulk limit. It is found that the optical phonon mode A1u, which is not-Raman active in bulk bismuth telluride crystals, appears in the atomically-thin films due to crystal-symmetry breaking. The intensity ratios of the out-of-plane A1u and A1g modes to the in-plane Eg mode grow with decreasing film thickness. The evolution of Raman signatures with the film thickness can be used for identification of bismuth telluride crystals with the thickness of few-quintuple layers, which are important for topological insulator and thermoelectric applications.

Bi(1-x)R(x)FeO(3)(R=rare earth): a family of novel magnetoelectrics

Abstract: Crystals of solid solutions Bi(1-x)R(x)FeO(3),here R= La, Dy, Gd, were obtained with x <=0.7. Solid solutions of the stated rare earths, as x is increased from 0 to 0.7, have one and the same sequence of five crystal structures (rhombohedral C3v 6, triclinic C1 1,orthorhombic D2 6,orthorhombic D2 5, orthorhombic C2v 9). The ferroelectric-paraelectric transition occurs in rhombohedral and triclinic crystals at T=810-560{\deg}C.The high temperature modifications are orthorhombic and cubic. The orthorhombic structure C2v 9 holds up to 1180{\deg}C.The ferroelectric domain structure was distinguished in all types of crystals. No magnetoelectric effect (MEE) was detected in the orthorhombic crystals with the D2 (222) symmetry class. But the mm2 crystals were found to have both quadratic and linear MEE.The value of the quadratic effect is considerably smaller than that ofthe linear one. Magnetoelectric hysteresis takes place in the crystals. The tensorial properties of the obtained crystals are analyzed from the viewpoint of crystal symmetry.

Graphene synthesis by chemical vapor deposition and transfer by a roll-to-roll process

Abstract: We synthesized centimeter-scale single- to few-layer graphene (FLG) films via chemical vapor deposition (CVD) on Ni foils. We demonstrates that the precipitation mechanism may not be the only important mechanism in the formation of graphene by CVD in Ni system, and that controlling the cooling rate in the CVD process may not be the appropriate way to control the thickness of graphene films. In addition, we are the first to demonstrate the transfer of centimeter-scale FLG from Ni foil to transparent flexible polyethylene terephthalate substrates via an efficient roll-to-roll process. Comparing to rigid substrates, synthesis of graphene on flexible Ni foil has necessity for the use of a roll-to-roll transfer process.