Showing papers in "arXiv: Materials Science in 2017"

Advanced capabilities for materials modelling with Quantum ESPRESSO

Abstract: Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software.

Advances in the Physics of Magnetic Skyrmions and Perspective for Technology

Abstract: Magnetic skyrmions are small swirling topological defects in the magnetization texture stabilized by the protection due to their topology. In most cases they are induced by chiral interactions between atomic spins existing in non-centrosymmetric magnetic compounds or in thin films in which inversion symmetry is broken by the presence of an interface. The skyrmions can be extremely small with diameters in the nanometer range and, importantly, they behave as particles that can be moved, created or annihilated, making them suitable for abacus-type applications in information storage, logic or neuro-inspired technologies. Up to the last years skyrmions were observed only at low temperature (and in most cases under large applied fields) but important efforts of research has been recently devoted to find thin film and multilayered structures in which skyrmions are stabilized above room temperature and manipulated by current. This article focuses on these recent advances on the route to devices prototypes.

Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues

Abstract: Freeze-casting, the templating of porous structure by the solidification of a solvent, have seen a great deal of efforts during the last few years. Of particular interest are the unique structure and properties exhibited by porous freeze-casted ceramics, which opened new opportunities in the field of cellular ceramics. The objective of this review is to provide a first understanding of the process as of today, with particular attention being paid on the underlying principles of the structure formation mechanisms and the influence of processing parameters on the structure. This analysis highlights the current limits of both the understanding and the control of the process. A few perspectives are given, with regards of the current achievements, interests and identified issues.

Janus Monolayer Transition Metal Dichalcogenides

Abstract: A novel crystal configuration of sandwiched S-Mo-Se structure (Janus SMoSe) at the monolayer limit has been synthesized and carefully characterized in this work. By controlled sulfurization of monolayer MoSe2 the top layer of selenium atoms are substituted by sulfur atoms while the bottom selenium layer remains intact. The peculiar structure of this new material is systematically investigated by Raman, photoluminescence and X-ray photoelectron spectroscopy and confirmed by transmission-electron microscopy and time-of-flight secondary ion mass spectrometry. Density-functional theory calculations are performed to better understand the Raman vibration modes and electronic structures of the Janus SMoSe monolayer, which are found to correlate well with corresponding experimental results. Finally, high basal plane hydrogen evolution reaction (HER) activity is discovered for the Janus monolayer and DFT calculation implies that the activity originates from the synergistic effect of the intrinsic defects and structural strain inherent in the Janus structure.

Antiferromagnetic opto-spintronics: Part of a collection of reviews on antiferromagnetic spintronics

Abstract: Control and detection of spin order in ferromagnets is the main principle allowing storing and reading of magnetic information in nowadays technology. The large class of antiferromagnets, on the other hand, is less utilized, despite its very appealing features for spintronics applications. For instance, the absence of net magnetization and stray fields eliminates crosstalk between neighbouring devices and the absence of a primary macroscopic magnetization makes spin manipulation in antiferromagnets inherently faster than in ferromagnets. However, control of spins in antiferromagnets requires exceedingly high magnetic fields, and antiferromagnetic order cannot be detected with conventional magnetometry. Here we provide an overview and illustrative examples of how electromagnetic radiation can be used for probing and modification of the magnetic order in antiferromagnets. Spin pumping from antiferromagnets, propagation of terahertz spin excitations, and tracing the reversal of the antiferromagnetic and ferroelectric order parameter in multiferroics are anticipated to be among the main topics defining the future of this field.

Electronic properties and applications of MXenes: a theoretical review

Abstract: Recent chemical exfoliation of layered MAX phase compounds to novel two-dimensional transition metal carbides and nitrides, so called MXenes, has brought new opportunity to materials science and technology. This review highlights the computational attempts that have been made to understand the physics and chemistry of this very promising family of advanced two-dimensional materials, and to exploit their novel and exceptional properties for electronic and energy harvesting applications.

Recent progress in voltage control of magnetism: Materials, mechanisms, and performance

Abstract: Voltage control of magnetism (VCM) is attracting increasing interest and exciting significant research activity driven by its profound physics and enormous potential for application. This review article aims to provide a comprehensive review of recent progress in VCM in different thin films. We first present a brief summary of the modulation of magnetism by electric fields and describe its discovery, development, classification, mechanism, and potential applications. In the second part, we focus on the classification of VCM from the viewpoint of materials, where both the magnetic medium and dielectric gating materials, and their influences on magnetic modulation efficiency are systematically described. In the third part, the nature of VCM is discussed in detail, including the conventional mechanisms of charge, strain, and exchange coupling at the interfaces of heterostructures, as well as the emergent models of orbital reconstruction and electrochemical effect. The fourth part mainly illustrates the typical performance characteristics of VCM, and discusses, in particular, its promising application for reducing power consumption and realizing high-density memory in several device configurations. The present review concludes with a discussion of the challenges and future prospects of VCM, which will inspire more in-depth research and advance the practical applications of this field.

Singlet Oxygen Generation as a Major Cause for Parasitic Reactions during Cycling of Aprotic Lithium-Oxygen Batteries

Abstract: Non-aqueous metal-oxygen batteries depend critically on the reversible formation/decomposition of metal oxides on cycling. Irreversible parasitic reactions cause poor rechargeability, efficiency, and cycle life and have predominantly been ascribed to the reactivity of reduced oxygen species with cell components. These species, however, cannot fully explain the side reactions. Here we show that singlet oxygen forms at the cathode of a lithium-oxygen cell during discharge and from the onset of charge, and accounts for the majority of parasitic reaction products. The amount increases during discharge, early stages of charge, and charging at higher voltages, and is enhanced by the presence of trace water. Superoxide and peroxide appear to be involved in singlet oxygen generation. Singlet oxygen traps and quenchers can reduce parasitic reactions effectively. Awareness of the highly reactive singlet oxygen in non-aqueous metal-oxygen batteries gives a rationale for future research towards achieving highly reversible cell operation.

Excitonic linewidth approaching the homogeneous limit in MoS2 based van der Waals heterostructures : accessing spin-valley dynamics

Abstract: The strong light matter interaction and the valley selective optical selection rules make monolayer (ML) MoS2 an exciting 2D material for fundamental physics and optoelectronics applications. But so far optical transition linewidths even at low temperature are typically as large as a few tens of meV and contain homogenous and inhomogeneous contributions. This prevented in-depth studies, in contrast to the better-characterized ML materials MoSe2 and WSe2. In this work we show that encapsulation of ML MoS2 in hexagonal boron nitride can efficiently suppress the inhomogeneous contribution to the exciton linewidth, as we measure in photoluminescence and reflectivity a FWHM down to 2 meV at T = 4K. This indicates that surface protection and substrate flatness are key ingredients for obtaining stable, high quality samples. Among the new possibilities offered by the well-defined optical transitions we measure the homogeneous broadening induced by the interaction with phonons in temperature dependent experiments. We uncover new information on spin and valley physics and present the rotation of valley coherence in applied magnetic fields perpendicular to the ML.

Giant anomalous Hall angle in a half-metallic magnetic Weyl semimetal

Abstract: Magnetic Weyl semimetals (WSMs) with time reversal symmetry breaking exhibit Weyl nodes that act as monopoles of Berry curvature and are thus expected to generate a large intrinsic anomalous Hall effect (AHE). However, in most magnetic WSMs, the Weyl nodes are located far from the Fermi energy, making it difficult to observe the Weyl-node dominated intrinsic AHE in experiments. Here we report a novel half-metallic magnetic WSM in the Kagome-lattice Shandite compound Co3Sn2S2. The Weyl nodes, linked by gapped nodal rings, are crucially located just 60 meV above the Fermi energy. Owing to both the significantly enhanced Berry curvature arising from the Weyl bands and the low charge conductivity, the anomalous Hall conductivity (AHC) and anomalous Hall angle (AHA) experimentally reach up to 1130 ohms-1 cm-1 and 20% respectively, which allows the material to simultaneously host a large AHC and giant AHA. Interpreting WSMs as coupled quantum AHE layers, the present results suggest that thin films of this quasi-two-dimensional WSM present a promising candidate for the bulk-insulating quantum AHE. Co3Sn2S2 as an easy-to-grow magnetic WSM thus represents an ideal platform to study Weyl physics. Our findings further suggest half-metallic Weyl semimetals - combining a topological Weyl phase for one spin channel with a band gap for the other - as a new paradigm for materials with a large Berry-in-origin AHE.

Field-effect transistors made from solution-grown two-dimensional tellurene

Abstract: The reliable production of two-dimensional crystals is essential for the development of new technologies based on 2D materials. However, current synthesis methods suffer from a variety of drawbacks, including limitations in crystal size and stability. Here, we report the fabrication of large-area, high-quality 2D tellurium (tellurene) using a substrate-free solution process. Our approach can create crystals with a process-tunable thickness, from monolayer to tens of nanometres, and with lateral sizes of up to 100 um. The chiral-chain van der Waals structure of tellurene gives rise to strong in-plane anisotropic properties and large thickness dependent shifts in Raman vibrational modes, which is not observed in other 2D layered materials. We also fabricate tellurene field-effect transistors, which exhibit air-stable performance at room temperature for over two months, on off ratios on the order of 106 and field-effect mobilities of around 700 cm2 per Vs. Furthermore, by scaling down the channel length and integrating with high-k dielectrics, transistors with a significant on-state current density of 1 A mm-1 are demonstrated.

Writing and Reading antiferromagnetic Mn$_2$Au: N\'eel spin-orbit torques and large anisotropic magnetoresistance

Abstract: Antiferromagnets are magnetically ordered materials which exhibit no net moment and thus are insensitive to magnetic fields. Antiferromagnetic spintronics aims to take advantage of this insensitivity for enhanced stability, while at the same time active manipulation up to the natural THz dynamic speeds of antiferromagnets is possible, thus combining exceptional storage density and ultra-fast switching. However, the active manipulation and read-out of the N\'eel vector (staggered moment) orientation is challenging. Recent predictions have opened up a path based on a new spin-orbit torque, which couples directly to the N\'eel order parameter. This N\'eel spin-orbit torque was first experimentally demonstrated in a pioneering work using semimetallic CuMnAs. Here we demonstrate for Mn$_2$Au, a good conductor with a high ordering temperature suitable for applications, reliable and reproducible switching using current pulses and readout by magnetoresistance measurements. The symmetry of the torques agrees with theoretical predictions and a large read-out magnetoresistance effect of more than $\simeq 6$~$\%$ is reproduced by ab initio transport calculations.

Response to critiques on Observation of the Wigner-Huntington transition to metallic hydrogen

Abstract: We reported the first observation of metallic hydrogen (MH) in the low temperature limit at a pressure of ~495 GPa in an article published in Science (1). This transition was first predicted by Wigner and Huntington (WE) over 80 years ago (2) at a pressure of ~25 GPa. In recent decades it became clear that the required pressure for metallization was far greater, in the 400-500 GPa range. Until now the observation of the WE transition in diamond anvil cells (DACs) has been prevented by one problem: the diamonds break before a sufficiently high pressure has been achieved. This has driven the high-pressure community to improve DACs and experimental methods to understand and overcome the conditions that limited the performance of diamonds and the pressure. In our experiment, with increasing pressure, we observed a clear transition from a transparent sample of solid molecular hydrogen to an opaque black sample to a shiny reflective sample of MH, as determined by reflectance measurements. There is no doubt that MH was produced at the highest pressures. Yet there have been criticisms concerning the pressure that was achieved, the possibility that the 50 nm alumina layer, deposited on diamonds to inhibit diffusion of hydrogen, might be transformed to a metal and be responsible for the reflectance, and analysis of the reflectance. Here we respond to the criticisms posted on the condensed matter arXiv by Loubeyre, Occelli, and Dumas (LOD)- arXiv:1702.07192, Eremets and Drozdov (ED)- arXiv:1702.05125, and Goncharov and Struzhkin (GS)- arXiv:1702.04246.

Liquid Metal-Organic Frameworks

Abstract: Metal--organic frameworks (MOFs) are a family of chemically diverse materials, with applications in a wide range of fields covering engineering, physics, chemistry, biology and medicine. Research so far has focused almost entirely on crystalline structures, yet a clear trend has emerged shifting the emphasis onto disordered states of MOFs, including "defective by design" crystals, as well as amorphous phases such as glasses and gels. Here we introduce a MOF liquid, a strongly associated liquid obtained by melting a zeolitic imidazolate framework (ZIF), with retention of chemical configuration, coordinative bonding modes, and porosity of the parent crystalline framework. We combine in-situ variable temperature X-ray, ex-situ neutron pair distribution function experiments, and first principles molecular dynamics simulations to study the melting phenomenon and the nature of the liquid obtained, focusing on structural characterization at the molecular scale, dynamics of the species, and thermodynamics of the solid--liquid transition.

Current-driven dynamics and inhibition of the skyrmion Hall effect of ferrimagnetic skyrmions in GdFeCo films

Abstract: Magnetic skyrmions are swirling magnetic textures with novel characteristics suitable for future spintronic and topological applications. Recent studies confirmed the room-temperature stabilization of skyrmions in ultrathin ferromagnets. However, such ferromagnetic skyrmions show undesirable topological effect, the skyrmion Hall effect, which leads to their current-driven motion towards device edges, where skyrmions could easily be annihilated by topographic defects. Recent theoretical studies have predicted enhanced current-driven behaviour for antiferromagnetically exchange-coupled skyrmions. Here we present the stabilization of these skyrmions and their current-driven dynamics in ferrimagnetic GdFeCo films. By utilizing element-specific X-ray imaging, we find that the skyrmions in the Gd and FeCo sublayers are antiferromagnetically exchange-coupled. We further confirm that ferrimagnetic skyrmions can move at a velocity of ~50 m s-1 with reduced skyrmion Hall angle, {\theta}SkHE ~20°. Our findings open the door to ferrimagnetic and antiferromagnetic skyrmionics while providing key experimental evidences of recent theoretical studies.

Fast domain wall motion induced by antiferromagnetic spin dynamics at the angular momentum compensation temperature of ferrimagnets

Abstract: Antiferromagnetic spintronics is an emerging research field which aims to utilize antiferromagnets as core elements in spintronic devices. A central motivation toward this direction is that antiferromagnetic spin dynamics is expected to be much faster than ferromagnetic counterpart because antiferromagnets have higher resonance frequencies than ferromagnets. Recent theories indeed predicted faster dynamics of antiferromagnetic domain walls (DWs) than ferromagnetic DWs. However, experimental investigations of antiferromagnetic spin dynamics have remained unexplored mainly because of the immunity of antiferromagnets to magnetic fields. Furthermore, this immunity makes field-driven antiferromagnetic DW motion impossible despite rich physics of field-driven DW dynamics as proven in ferromagnetic DW studies. Here we show that fast field-driven antiferromagnetic spin dynamics is realized in ferrimagnets at the angular momentum compensation point TA. Using rare-earth 3d-transition metal ferrimagnetic compounds where net magnetic moment is nonzero at TA, the field-driven DW mobility remarkably enhances up to 20 km/sT. The collective coordinate approach generalized for ferrimagnets and atomistic spin model simulations show that this remarkable enhancement is a consequence of antiferromagnetic spin dynamics at TA. Our finding allows us to investigate the physics of antiferromagnetic spin dynamics and highlights the importance of tuning of the angular momentum compensation point of ferrimagnets, which could be a key towards ferrimagnetic spintronics.

Excitations in the field-induced quantum spin liquid state of alpha-RuCl3

Abstract: The Kitaev model on a honeycomb lattice predicts a paradigmatic quantum spin liquid (QSL) exhibiting Majorana Fermion excitations. The insight that Kitaev physics might be realized in practice has stimulated investigations of candidate materials, recently including alpha-RuCl3. In all the systems studied to date, non-Kitaev interactions induce magnetic order at low temperature. However, in-plane magnetic fields of roughly 8 Tesla suppress the long-range magnetic order in alpha-RuCl3 raising the intriguing possibility of a field-induced QSL exhibiting non-Abelian quasiparticle excitations. Here we present inelastic neutron scattering in alpha-RuCl3 in an applied magnetic field. At a field of 8 Tesla, the spin waves characteristic of the ordered state vanish throughout the Brillouin zone. The remaining single dominant feature of the response is a broad continuum centered at the Gamma point, previously identified as a signature of fractionalized excitations. This provides compelling evidence that a field-induced QSL state has been achieved.

A conductive topological insulator with colossal spin Hall effect for ultra-low power spin-orbit-torque switching

Abstract: Spin-orbit-torque (SOT) switching using the spin Hall effect (SHE) in heavy metals and topological insulators (TIs) has great potential for ultra-low power magnetoresistive random-access memory (MRAM) To be competitive with conventional spin-transfer-torque (STT) switching, a pure spin current source with large spin Hall angle (${\theta}_{SH}$ > 1) and high electrical conductivity (${\sigma} > 10^5 {\Omega}^{-1}m^{-1}$) is required Here, we demonstrate such a pure spin current source: BiSb thin films with ${\sigma}{\sim}25*10^5 {\Omega}^{-1}m^{-1}$, ${\theta}_{SH}{\sim}52$, and spin Hall conductivity ${\sigma}_{SH}{\sim}13*10^7 {\hbar}/2e{\Omega}^{-1}m^{-1}$ at room temperature We show that BiSb thin films can generate a colossal spin-orbit field of 2770 Oe/(MA/cm$^2$) and a critical switching current density as low as 15 MA/cm$^2$ in Bi$_{09}$Sb$_{01}$ / MnGa bi-layers BiSb is the best candidate for the first industrial application of topological insulators

Structural composites for multifunctional applications: current challenges and future trends

Abstract: This review paper summarizes the current state-of-art and challenges for the future developments of fiber-reinforced composites for structural applications with multifunctional capabilities. After a brief analysis of the reasons of the successful incorporation of fiber-reinforced composites in many different industrial sectors, the review analyzes three critical factors that will define the future of composites. The first one is the application of novel fiber-deposition and preforming techniques together with innovative liquid moulding strategies, which will be combined by optimization tools based on novel multiscale modelling approaches, so fiber-reinforced composites with optimized properties can be designed and manufactured for each application. In addition, composite applications will be enhanced by the incorporation of multifunctional capabilities. Among them, electrical conductivity, energy storage (structural supercapacitors and batteries) and energy harvesting (piezoelectric and solar energy) seem to be the most promising ones.

Spin-orbit torques induced by interface-generated spin currents

Abstract: Magnetic torques generated through spin-orbit coupling promise energy-efficient spintronic devices. It is important for applications to control these torques so that they switch films with perpendicular magnetizations without an external magnetic field. One suggested approach uses magnetic trilayers in which the torque on the top magnetic layer can be manipulated by changing the magnetization of the bottom layer. Spin currents generated in the bottom magnetic layer or its interfaces transit the spacer layer and exert a torque on the top magnetization. Here we demonstrate field-free switching in such structures and attribute it to a novel spin current generated at the interface between the bottom layer and the spacer layer. The measured torque has a distinct dependence on the bottom layer magnetization which is consistent with this interface-generated spin current but not the anticipated bulk effects. This other interface-generated spin-orbit torque will enable energy-efficient control of spintronic devices.

Approaching the Intrinsic Photoluminescence Linewidth in Transition Metal Dichalcogenide Monolayers

Abstract: Excitonic states in monolayer transition metal dichalcogenides (TMDCs) have been the subject of extensive recent interest. Their intrinsic properties can, however, be obscured due to the influence of inhomogeneity in the external environment. Here we report methods for fabricating high quality TMDC monolayers with narrow photoluminescence (PL) linewidth approaching the intrinsic limit. We find that encapsulation in hexagonal boron nitride (h-BN) sharply reduces the PL linewidth, and that passivation of the oxide substrate by an alkyl monolayer further decreases the linewidth and also minimizes the charged exciton (trion) peak. The combination of these sample preparation methods results in much reduced spatial variation in the PL emission, with a full-width-at-half-maximum as low as 1.7 meV. Analysis of the PL line shape yields a homogeneous width of 1.43$\pm$0.08 meV and inhomogeneous broadening of 1.1$\pm$0.3 meV.

Ultra-low-loss Polaritons in Isotopically Pure Materials: A New Approach

Abstract: Conventional optical components are limited to size-scales much larger than the wavelength of light, as changes in the amplitude, phase and polarization of the electromagnetic fields are accrued gradually along an optical path. However, advances in nanophotonics have produced ultra-thin, co-called "flat" optical components that beget abrupt changes in these properties over distances significantly shorter than the free space wavelength. While high optical losses still plague many approaches, phonon polariton (PhP) materials have demonstrated long lifetimes for sub-diffractional modes in comparison to plasmon-polariton-based nanophotonics. We experimentally observe a three-fold improvement in polariton lifetime through isotopic enrichment of hexagonal boron nitride (hBN). Commensurate increases in the polariton propagation length are demonstrated via direct imaging of polaritonic standing waves by means of infrared nano-optics. Our results provide the foundation for a materials-growth-directed approach towards realizing the loss control necessary for the development of PhP-based nanophotonic devices.

Full phase diagram of isolated skyrmions in a ferromagnet

Abstract: Magnetic skyrmions are topological quasi particles of great interest for data storage applications because of their small size, high stability, and ease of manipulation via electric current. Theoretically, however, skyrmions are poorly understood since existing theories are not applicable to small skyrmion sizes and finite material thicknesses. Here, we present a complete theoretical framework to determine the energy of any skyrmion in any material, assuming only a circular symmetric 360$^\circ$ domain wall profile and a homogeneous magnetization profile in the out-of-plane direction. Our model precisely agrees with existing experimental data and micromagnetic simulations. Surprisingly, we can prove that there is no topological protection of skyrmions. We discover and confirm new phases, such as bi-stability, a phenomenon unknown in magnetism so far. The outstanding computational performance and precision of our model allow us to obtain the complete phase diagram of static skyrmions and to tackle the inverse problem of finding materials corresponding to given skyrmion properties, a milestone of skyrmion engineering.

Ultrafast, highly-sensitive infrared photodetectors based on two-dimensional oxyselenide crystals

Abstract: Infrared detection and sensing is deeply embedded in modern technology and human society and its development has always been benefitting from the discovery of new photoelectric response materials. The rise of two-dimensional (2D) materials, thanks to their distinct electronic structure, extreme dimensional confinement and strong light-matter interactions, provides new material platform for next-generation infrared photodetection. Ideal infrared detectors should have fast respond, high sensitivity and air-stability, which is rare to meet at the same time for all existing 2D materials, either graphene, transition metal dichalcogenide or black phosphorous. Herein we demonstrate a new infrared photodetector based on 2D Bi2O2Se crystals, whose main characteristics are superb in the whole 2D family: high sensitivity of ~65 A/W at 1200 nm and ultrafast intrinsic photoresponse of ~1 ps at room temperature. Such great performance is attributed to the suitable electronic bandgap and high carrier mobility of 2D oxyselenide. With additional merits of mass production, excellent stability and flexibility, 2D oxyselenide detectors should open new avenues in highly-sensitive, high-speed, low-cost, flexible infrared photodetection and imaging.

JDFTx: software for joint density-functional theory

Abstract: Density-functional theory (DFT) has revolutionized computational prediction of atomic-scale properties from first principles in physics, chemistry and materials science. Continuing development of new methods is necessary for accurate predictions of new classes of materials and properties, and for connecting to nano- and mesoscale properties using coarse-grained theories. JDFTx is a fully-featured open-source electronic DFT software designed specifically to facilitate rapid development of new theories, models and algorithms. Using an algebraic formulation as an abstraction layer, compact C++11 code automatically performs well on diverse hardware including GPUs. This code hosts the development of joint density-functional theory (JDFT) that combines electronic DFT with classical DFT and continuum models of liquids for first-principles calculations of solvated and electrochemical systems. In addition, the modular nature of the code makes it easy to extend and interface with, facilitating the development of multi-scale toolkits that connect to ab initio calculations, e.g. photo-excited carrier dynamics combining electron and phonon calculations with electromagnetic simulations.

Nucleation of dislocations and their dynamics in layered oxides cathode materials during battery charging

Abstract: Defects and their interactions in crystalline solids often underpin material properties and functionality as they are decisive for stability, result in enhanced diffusion, and act as a reservoir of vacancies. Recently, lithium-rich layered oxides have emerged among the leading candidates for the next-generation energy storage cathode material, delivering 50 % excess capacity over commercially used compounds. Oxygen-redox reactions are believed to be responsible for the excess capacity, however, voltage fading has prevented commercialization of these new materials. Despite extensive research the understanding of the mechanisms underpinning oxygen-redox reactions and voltage fade remain incomplete. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe nucleation of a mobile dislocation network in nanoparticles of lithium-rich layered oxide material. Surprisingly, we find that dislocations form more readily in the lithium-rich layered oxide material as compared with a conventional layered oxide material, suggesting a link between the defects and the anomalously high capacity in lithium-rich layered oxides. The formation of a network of partial dislocations dramatically alters the local lithium environment and contributes to the voltage fade. Based on our findings we design and demonstrate a method to recover the original high voltage functionality. Our findings reveal that the voltage fade in lithium-rich layered oxides is reversible and call for new paradigms for improved design of oxygen-redox active materials.

Deep Neural Networks for Accurate Predictions of Garnet Stability

Abstract: Predicting the stability of crystals is one of the central problems in materials science. Today, density functional theory (DFT) calculations are the computational tool of choice to obtain energies of crystals with quantitative accuracy. Despite algorithmic and computing advances, DFT calculations remain comparatively expensive and scale poorly with system size. Here we show that deep neural networks utilizing just two descriptors - the Pauling electronegativity and ionic radii - can predict the DFT formation energies of C3A2D3O12 garnets with extremely low mean absolute errors of 7-8 meV/atom, an order of magnitude improvement over previous machine learning models and well within the limits of DFT accuracy. Further extension to mixed garnets with little loss in accuracy can be achieved using a binary encoding scheme that introduces minimal increase in descriptor dimensionality. Our results demonstrate that generalizable deep-learning models for quantitative crystal stability prediction can be built on a small set of chemically-intuitive descriptors. Such models provide the means to rapidly transverse vast chemical spaces to accurately identify stable compositions, accelerating the discovery of novel materials with potentially superior properties.

High quality atomically thin PtSe2 films grown by molecular beam epitaxy

Abstract: Atomically thin PtSe2 films have attracted extensive research interests for potential applications in high-speed electronics, spintronics and photodetectors. Obtaining high quality, single crystalline thin films with large size is critical. Here we report the first successful layer-by-layer growth of high quality PtSe2 films by molecular beam epitaxy. Atomically thin films from 1 ML to 22 ML have been grown and characterized by low-energy electron diffraction, Raman spectroscopy and X-ray photoemission spectroscopy. Moreover, a systematic thickness dependent study of the electronic structure is revealed by angle-resolved photoemission spectroscopy (ARPES), and helical spin texture is revealed by spin-ARPES. Our work provides new opportunities for growing large size single crystalline films for investigating the physical properties and potential applications of PtSe2.

Computational Study of Halide Perovskite-Derived A$_2$BX$_6$ Inorganic Compounds: Chemical Trends in Electronic Structure and Structural Stability

Abstract: The electronic structure and energetic stability of A$_2$BX$_6$ halide compounds with the cubic and tetragonal variants of the perovskite-derived K$_2$PtCl$_6$ prototype structure are investigated computationally within the frameworks of density-functional-theory (DFT) and hybrid (HSE06) functionals. The HSE06 calculations are undertaken for seven known A$_2$BX$_6$ compounds with A = K, Rb and Cs, and B = Sn, Pd, Pt, Te, and X = I. Trends in band gaps and energetic stability are identified, which are explored further employing DFT calculations over a larger range of chemistries, characterized by A = K, Rb, Cs, B = Si, Ge, Sn, Pb, Ni, Pd, Pt, Se and Te and X = Cl, Br, I. For the systems investigated in this work, the band gap increases from iodide to bromide to chloride. Further, variations in the A site cation influences the band gap as well as the preferred degree of tetragonal distortion. Smaller A site cations such as K and Rb favor tetragonal structural distortions, resulting in a slightly larger band gap. For variations in the B site in the (Ni, Pd, Pt) group and the (Se, Te) group, the band gap increases with increasing cation size. However, no observed chemical trend with respect to cation size for band gap was found for the (Si, Sn, Ge, Pb) group. The findings in this work provide guidelines for the design of halide A$_2$BX$_6$ compounds for potential photovoltaic applications.

Spin torque control of antiferromagnetic moments in NiO

Abstract: For a long time, there have been no efficient ways of controlling antiferromagnets. Quite a strong magnetic field was required to manipulate the magnetic moments because of a high molecular field and a small magnetic susceptibility. It was also difficult to detect the orientation of the magnetic moments since the net magnetic moment is effectively zero. For these reasons, research on antiferromagnets has not been progressed as drastically as that on ferromagnets which are the main materials in modern spintronic devices. Here we show that the magnetic moments in NiO, a typical natural antiferromagnet, can indeed be controlled by the spin torque with a relatively small electric current density (~5 x 10^7 A/cm^2) and their orientation is detected by the transverse resistance resulting from the spin Hall magnetoresistance . The demonstrated techniques of controlling and detecting antiferromagnets would outstandingly promote the methodologies in the recently emerged "antiferromagnetic spintronics". Furthermore, our results essentially lead to a spin torque antiferromagnetic memory.