Showing papers in "arXiv: Materials Science in 2019"

Magnetic 2D materials and heterostructures

Abstract: The family of 2D materials grows day by day, drastically expanding the scope of possible phenomena to be explored in two dimensions, as well as the possible van der Waals heterostructures that one can create. Such 2D materials currently cover a vast range of properties. Until recently, this family has been missing one crucial member - 2D magnets. The situation has changed over the last two years with the introduction of a variety of atomically-thin magnetic crystals. Here we will discuss the difference between magnetic states in 2D materials and in bulk crystals and present an overview of the 2D magnets that have been explored recently. We will focus, in particular, on the case of the two most studied systems - semiconducting CrI$_3$ and metallic Fe$_3$GeTe$_2$ - and illustrate the physical phenomena that have been observed. Special attention will be given to the range of novel van der Waals heterostructures that became possible with the appearance of 2D magnets, offering new perspectives in this rapidly expanding field.

Verification of Short-Range Order and Its Impact on the Properties of the CrCoNi Medium Entropy Alloy

Abstract: Traditional metallic alloys are mixtures of elements where the atoms of minority species tend to distribute randomly if they are below their solubility limit, or lead to the formation of secondary phases if they are above it. Recently, the concept of medium/high entropy alloys (MEA/HEA) has expanded this view, as these materials are single-phase solid solutions of generally equiatomic mixtures of metallic elements that have been shown to display enhanced mechanical properties. However, the question has remained as to how random these solid solutions actually are, with the influence of chemical short-range order (SRO) suggested in computational simulations but not seen experimentally. Here we report the first direct observation of SRO in the CrCoNi MEA using high resolution and energy-filtered transmission electron microscopy. Increasing amounts of SRO give rise to both higher stacking fault energy and hardness. These discoveries suggest that the degree of chemical ordering at the nanometer scale can be tailored through thermomechanical processing, providing a new avenue for tuning the mechanical properties of MEA/HEAs.

Magnetic-field-induced quantized anomalous Hall effect in intrinsic magnetic topological insulator MnBi$_2$Te$_4$

Abstract: In a magnetic topological insulator, nontrivial band topology conspires with magnetic order to produce exotic states of matter that are best exemplified by quantum anomalous Hall (QAH) insulators and axion insulators. Up till now, such magnetic topological insulators are obtained by doping topological insulators with magnetic atoms. The random magnetic dopants, however, inevitably introduce disorders that hinder further exploration of quantum effects in the material. Here, we resolve this dilemma by probing quantum transport in MnBi$_2$Te$_4$ thin flake - a topological insulator with intrinsic magnetic order. In this layered van der Waals crystal, the ferromagnetic layers couple anti-parallel to each other, so MnBi$_2$Te$_4$ is an antiferromagnet. A magnetic field, however, aligns all the layers and induces an interlayer ferromagnetic order; we show that a quantized anomalous Hall response emerges in atomically thin MnBi$_2$Te$_4$ under a moderate magnetic field. MnBi$_2$Te$_4$ therefore becomes the first intrinsic magnetic topological insulator exhibiting quantized anomalous Hall effect. The result establishes MnBi$_2$Te$_4$ as an ideal arena for further exploring various topological phenomena.

Wannier90 as a community code: new features and applications

Abstract: Wannier90 is an open-source computer program for calculating maximally-localised Wannier functions (MLWFs) from a set of Bloch states. It is interfaced to many widely used electronic-structure codes thanks to its independence from the basis sets representing these Bloch states. In the past few years the development of Wannier90 has transitioned to a community-driven model; this has resulted in a number of new developments that have been recently released in Wannier90 v3.0. In this article we describe these new functionalities, that include the implementation of new features for wannierisation and disentanglement (symmetry-adapted Wannier functions, selectively-localised Wannier functions, selected columns of the density matrix) and the ability to calculate new properties (shift currents and Berry-curvature dipole, and a new interface to many-body perturbation theory); performance improvements, including parallelisation of the core code; enhancements in functionality (support for spinor-valued Wannier functions, more accurate methods to interpolate quantities in the Brillouin zone); improved usability (improved plotting routines, integration with high-throughput automation frameworks), as well as the implementation of modern software engineering practices (unit testing, continuous integration, and automatic source-code documentation). These new features, capabilities, and code development model aim to further sustain and expand the community uptake and range of applicability, that nowadays spans complex and accurate dielectric, electronic, magnetic, optical, topological and transport properties of materials.

Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways

Abstract: High-entropy alloys (HEAs) were presumed to have a configurational entropy as high as that of an ideally mixed solid solution (SS) of multiple elements in near-equal proportions. However, enthalpic interactions inevitably render such chemically disordered SSs rare and metastable, except at very high temperatures. Here we highlight a structural feature that sets these concentrated SSs apart from traditional solvent-solute ones: the HEAs possess a wide variety of (local) chemical ordering (LCO). Our atomistic simulations employing an empirical interatomic potential for NiCoCr reveal that the LCO of the multi-principal-element SS changes conspicuously with alloy processing conditions, producing a wide range of generalized planar fault energy in terms of both its sample-average and spatial variation. We further demonstrate that the LCO heightens the ruggedness of the energy landscape and raises activation barriers governing dislocation activities. This not only influences the selection of dislocation pathways in slip, faulting, twinning, and martensitic transformation, but also increases the lattice friction to dislocation motion via a new mechanism of nanoscale segment detrapping that elevates the mechanical strength. All these open a vast playground not accessible to ground-state SSs or intermetallics, offering rich opportunities to tune properties.

Magnetic Weyl Semimetal Phase in a Kagome Crystal

Abstract: Weyl semimetals are crystalline solids that host emergent relativistic Weyl fermions and have characteristic surface Fermi-arcs in their electronic structure. Weyl semimetals with broken time reversal symmetry are difficult to identify unambiguously. In this work, using angle-resolved photoemission spectroscopy, we visualized the electronic structure of the ferromagnetic crystal Co3Sn2S2 and discovered its characteristic surface Fermi-arcs and linear bulk band dispersions across the Weyl points. These results establish Co3Sn2S2 as a magnetic Weyl semimetal that may serve as a platform for realizing phenomena such as chiral magnetic effects, unusually large anomalous Hall effect and quantum anomalous Hall effect.

Thermodynamics of Guest-Induced Structural Transitions in Hybrid Organic-Inorganic Frameworks

Abstract: We provide a general thermodynamic framework for the understanding of guest-induced structural transitions in hybrid organic-inorganic materials. The method is based on the analysis of experimental adsorption isotherms. It allows the determination of the free energy differences between host structures involved in guest-induced transitions, especially hard to obtain experimentally. We discuss the general case of adsorption in flexible materials and show how a few key quantities, such as pore volumes and adsorption affinities, entirely determine the phenomenology of adsorption, including the occurrence of structural transitions. On the basis of adsorption thermodynamics, we then propose a taxonomy of guest-induced structural phase transitions and the corresponding isotherms. In particular, we derive generic conditions for observing a double structural transition upon adsorption, often resulting in a two-step isotherm. Finally, we show the wide applicability and the robustness of the model through three case studies of topical hybrid organic-inorganic frameworks: the hysteretic hydrogen adsorption in Co(1,4-benzenedipyrazolate), the guest-dependent gate-opening in Cu(4,4'-bipyridine)(2,5-dihydroxybenzoate)2 and the CO2-induced "breathing" of hybrid material MIL-53.

Topological Electronic Structure and Its Temperature Evolution in Antiferromagnetic Topological Insulator MnBi2Te4

Abstract: Topological quantum materials coupled with magnetism can provide a platform for realizing rich exotic physical phenomena, including quantum anomalous Hall effect, axion electrodynamics and Majorana fermions. However, these unusual effects typically require extreme experimental conditions such as ultralow temperature or sophisticate material growth and fabrication. Recently, new intrinsic magnetic topological insulators were proposed in MnBi2Te4-family compounds - on which rich topological effects could be realized under much relaxed experimental conditions. However, despite the exciting progresses, the detailed electronic structures observed in this family of compounds remain controversial up to date. Here, combining the use of synchrotron and laser light sources, we carried out comprehensive and high resolution angle-resolved photoemission spectroscopy studies on MnBi2Te4, and clearly identified its topological electronic structures including the characteristic gapless topological surface states. In addition, the temperature evolution of the energy bands clearly reveals their interplay with the magnetic phase transition by showing interesting differences for the bulk and surface states, respectively. The identification of the detailed electronic structures of MnBi2Te4 will not only help understand its exotic properties, but also pave the way for the design and realization of novel phenomena and applications.

Unified theory of thermal transport in crystals and disordered solids

Abstract: Crystals and glasses exhibit fundamentally different heat conduction mechanisms: the periodicity of crystals allows for the excitation of propagating vibrational waves that carry heat, as first discussed by Peierls; in glasses, the lack of periodicity breaks Peierls' picture and heat is mainly carried by the coupling of vibrational modes, often described by a harmonic theory introduced by Allen and Feldman. Anharmonicity or disorder are thus the limiting factors for thermal conductivity in crystals or glasses; hitherto, no transport equation has been able to account for both. Here, we derive such equation, resulting in a thermal conductivity that reduces to the Peierls and Allen-Feldman limits, respectively, in anharmonic-and-ordered or harmonic-and-disordered solids, while also covering the intermediate regimes where both effects are relevant. This approach also solves the long-standing problem of accurately predicting the thermal properties of crystals with ultralow or glass-like thermal conductivity, as we show with an application to a thermoelectric material representative of this class.

The Behavior of Flexible MIL-53(Al) upon CH4 and CO2 Adsorption

Abstract: The use of the osmotic thermodynamic model, combined with a series of methane and carbon dioxide gas adsorption experiments at various temperatures, has allowed shedding some new light on the fascinating phase behavior of flexible MIL-53(Al) metal-organic frameworks. A generic temperature-loading phase diagram has been derived; it is shown that the breathing effect in MIL-53 is a very general phenomenon, which should be observed in a limited temperature range regardless of the guest molecule. In addition, the previously proposed stress model for the structural transitions of MIL-53 is shown to be transferable from xenon to methane adsorption. The stress model also provides a theoretical framework for understanding the existence of lp/np phase mixtures at pressures close to the breathing transition pressure, without having to invoke an inhomogeneous distribution of the adsorbate in the porous sample.

Surface-charge-mediated Formation of H-TiO2@Ni(OH)2 Heterostructures for High-Performance Supercapcitors

Abstract: Supercapacitors or ultracapacitors are promising for efficient energy storage applications, owing to their high power density, high charge-discharge rates, and long cycle life performance. To achieve this goal, a large specific surface area, an high electronic conductivity and a fast cation intercalation de-intercalation process are generally required in the design and preparation of materials for high-performance supercapacitors. Recently, core-shell heterostructures with multifunctionalities are regarded as one of promising materials for supercapacitors or ultracapacitors applications. In particular, one-dimensional (1D) core-shell heterostructures have sparked great scientific and technological interests due to their high versatility and applicability as the essential components in nanoscale electronics, catalysis, chemical sensing, and energy conversion storage devices. Various metal metal oxide, metal metal, metal oxide metal oxide and metal oxide conductive polymers so far have been investigated. Transition metal hydroxide oxide Co3O4, Co(OH)2, MnO2, Mn(OH)2, NiO, Ni(OH)2 and their compounds storing energy by surface faradaic (redox) reactions were generally integrated with conducting scaffold to build core-shell structure. Intensive studies show that an enlarged active surface area of transition metal hydroxide oxide enables a promoted surface redox reaction and enhanced electrochemical performance. Therefore, controllable synthesis of a hierarchically porous construction with high surface areas is critically important for energy storage.

Absolute energy level positions in tin and lead based halide perovskites

Abstract: Metal-halide perovskites are promising materials for future optoelectronic applications. One intriguing property, important for many applications, is the tunability of the band gap via compositional engineering. While experimental reports on changes in absorption or photoluminescence show rather good agreement for wide variety of compounds, the physical origins of these changes, namely the variations in valence band and conduction band positions, are not well characterized. Knowledge of these band positions is of importance for optimizing the energy level alignment with charge extraction layers in optoelectronic devices. Here, we determine ionization energy and electron affinity values of all primary tin and lead based perovskites using photoelectron spectroscopy data, supported by first-principles calculations. Through analysis of the chemical bonding, we characterize the key energy levels and elucidate their trends via a tight-binding analysis. We demonstrate that energy level variations in perovskites are primarily determined by the relative positions of the atomic energy levels of metal cations and halide anions. Secondary changes in the perovskite energy levels result from the cation-anion interaction strength, which depends on the volume and structural distortions of the perovskite lattices. These results mark a significant step towards understanding the electronic structure of this material class and provides the basis for rational design rules regarding the energetics in perovskite optoelectronics.

Crystal growth and magnetic structure of MnBi2Te4

Abstract: Millimeter-sized MnBi$_2$Te$_4$ single crystals are grown out of Bi-Te flux and characterized by measuring magnetic and transport properties, scanning tunneling microscope (STM) and spectroscopy (STS). The magnetic structure of MnBi$_2$Te$_4$ below T$_N$ is determined by powder and single crystal neutron diffraction measurements. Below T$_N$=24\,K, Mn$^{2+}$ moments order ferromagnetically in the \textit{ab} plane but antiferromagnetically along the crystallographic \textit{c} axis. The ordered moment is 4.04(13) $\mu_{B}$/Mn at 10\,K and aligned along the crystallographic \textit{c}-axis. The electrical resistivity drops upon cooling across T$_N$ or when going across the metamagnetic transition in increasing fields below T$_N$. A critical scattering effect was observed in the vicinity of T$_N$ in the temperature dependence of thermal conductivity. However, A linear temperature dependence was observed for thermopower in the temperature range 2K-300K without any anomaly around T$_N$. These indicate that the magnetic order in Mn-Te layer has negligible effect on the electronic band structure, which makes possible the realization of proposed topological properties in MnBi$_2$Te$_4$ after fine tuning of the electronic band structure.

New classes of chiral topological nodes with non-contractible surface Fermi arcs in CoSi

Abstract: In condensed matter systems, chiral topological nodes are robust band crossing points in momentum space that carry nonzero Chern numbers. The chirality is manifested by the presence of surface Fermi arcs connecting the projections of nodes with opposite Chern numbers. In addition to the well-known Weyl nodes, theorists have proposed several other types of chiral topological nodes in condensed matter systems, but the direct experimental evidence of their existence is still lacking. Here, using angle-resolved photoemission spectroscopy, we reveal two types of new chiral nodes, namely the spin-1 nodes and charge-2 Dirac nodes, at the band crossing points near the Fermi level in CoSi, the projections of which on the (001) surface are connected by topologically protected surface Fermi arcs. As these chiral nodes in CoSi are enforced at the Brillouin zone (BZ) center and corner by the crystalline symmetries, the surface Fermi arcs connecting their projections form a non-contractible path traversing the entire (001) surface BZ, in sharp contrast to pairs of Weyl nodes with small separation. Our work marks the first experimental observation of chiral topological nodes beyond the Weyl nodes both in the bulk and on the surface in condensed matter systems.

Fatigue-resistant high-performance elastocaloric materials via additive manufacturing.

Abstract: Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performance low-hysteresis elastocaloric cooling materials via additive manufacturing of Titanium-Nickel (Ti-Ni) alloys. Contrary to established knowledge of the physical metallurgy of Ti-Ni alloys, intermetallic phases are found to be beneficial to elastocaloric performances when they are combined with the binary Ti-Ni compound in nanocomposite configurations. The resulting microstructure gives rise to quasi-linear stress-strain behaviors with extremely small hysteresis, leading to enhancement in the materials efficiency by a factor of five. Furthermore, despite being composed of more than 50% intermetallic phases, the reversible, repeatable elastocaloric performance of this material is shown to be stable over one million cycles. This result opens the door for direct implementation of additive manufacturing to elastocaloric cooling systems where versatile design strategy enables both topology optimization of heat exchangers as well as unique microstructural control of metallic refrigerants.

Molecular understanding of charge storage and charging dynamics in supercapacitors with MOF electrodes and ionic liquid electrolytes

Abstract: We present a computational microscopy analysis (targeted molecular dynamics simulations) of the structure and performance of conductive metal organic framework (MOF) electrodes in supercapacitors with room temperature ionic liquids. The molecular modeling predicts the characteristic shapes of the potential dependence of electrode capacitance, relying on the structure of MOF electrodes and particularly how ions transport and reside in MOFs under polarization. Transmission line model was adopted to characterize the charging dynamics process and build up a bridge to evaluate the capacitive performance of practical supercapacitor devices at macroscale from the simulation-obtained data at nanoscale. Such nanoscale-to-macroscale analysis demonstrates the potential of MOF supercapacitors for achieving unprecedentedly high volumetric energy and power densities. The investigation gives molecular insights into the preferred structures of MOF for achieving these results, which could provide a blueprint for future experimental characterization of these new systems.

Observation of ballistic avalanche phenomena in nanoscale vertical InSe/BP heterostructures

Abstract: Initiating impact ionization of avalanche breakdown essentially requires applying a high electric field in a long active region, hampering carrier-multiplication with high gain, low bias and superior noise performance. Here we report the observation of ballistic avalanche phenomena in sub-MFP scaled vertical indium selenide (InSe)/black phosphorus (BP) heterostructures. The heterojunction is engineered to avalanche photodetectors (APD) and impact ionization transistors, demonstrating ultra-sensitive mid-IR light detection (4 {\mu}m wavelength) and ultra-steep subthreshold swing, respectively. These devices show an extremely low avalanche threshold (<1 volt), excellent low noise figures and distinctive density spectral shape. Further transport measurement evidences the breakdown originals from a ballistic avalanche phenomenon, where the sub-MFP BP channel enables both electrons and holes to impact-ionize the lattice and abruptly amplify the current without scattering from the obstacles in a deterministic nature. Our results shed light on the development of advanced photodetectors and efficiently facilitating carriers on the nanoscale.

Local Crystal Misorientation Influences Non-Radiative Recombination

Abstract: We use ultrasensitive electron backscatter diffraction (EBSD) to map the local crystal orientations, grains, and grain boundaries in CH3NH3PbI3 (MAPI) perovskite thin films. Although the true grain structure is broadly consistent with the morphology visible in scanning electron microscopy (SEM), the inverse pole figure maps taken with EBSD reveal grain structure and internal misorientation that is otherwise hidden. Local crystal misorientation is consistent with the presence of local strain which varies from one grain to the next. We acquire co-aligned confocal optical photoluminescence (PL) microscopy images on the same MAPI samples used for EBSD. We correlate optical and EBSD data, showing that PL is anticorrelated with the local grain orientation spread, suggesting that grains with higher degrees of crystalline orientational heterogeneity (local strain) exhibit more non-radiative recombination. We find that larger grains tend to have larger grain orientation spread, consistent with higher degrees of strain and non-radiative recombination.

Light-Induced Charge Density Wave in LaTe$_3$

Abstract: When electrons in a solid are excited with light, they can alter the free energy landscape and access phases of matter that are beyond reach in thermal equilibrium. This accessibility becomes of vast importance in the presence of phase competition, when one state of matter is preferred over another by only a small energy scale that, in principle, is surmountable by light. Here, we study a layered compound, LaTe$_3$, where a small in-plane (a-c plane) lattice anisotropy results in a unidirectional charge density wave (CDW) along the c-axis. Using ultrafast electron diffraction, we find that after photoexcitation, the CDW along the c-axis is weakened and subsequently, a different competing CDW along the a-axis emerges. The timescales characterizing the relaxation of this new CDW and the reestablishment of the original CDW are nearly identical, which points towards a strong competition between the two orders. The new density wave represents a transient non-equilibrium phase of matter with no equilibrium counterpart, and this study thus provides a framework for unleashing similar states of matter that are "trapped" under equilibrium conditions.

Electronic Transport and quantum oscillation of Topological Semimetals

Abstract: Three-dimensional (3D) topological semimetals represent a new class of topological matters. The study of this family of materials has been at the frontiers of condensed matter physics, and many breakthroughs have been made. Several topological semimetal phases, including Dirac semimetals (DSMs), Weyl semimetals (WSMs), nodal-line semimetals (NLSMs), and triple-point semimetals, have been theoretically predicted and experimentally demonstrated. The low-energy excitation around the Dirac/Weyl nodal points, nodal line, or triply degenerated nodal point can be viewed as emergent relativistic fermions. Experimental studies have shown that relativistic fermions can result in a rich variety of exotic transport properties, e.g., extremely large magnetoresistance, the chiral anomaly, and the intrinsic anomalous Hall effect. In this review, we first briefly introduce band structural characteristics of each topological semimetal phase, then review the current studies on quantum oscillations and exotic transport properties of various topological semimetals, and finally provide a perspective of this area.

Type-II multiferroic Hf$_{2}$VC$_{2}$F$_{2}$ MXene monolayer with high transition temperature

Abstract: Achieving multiferroic two-dimensional (2D) materials should enable numerous functionalities in nanoscale devices Until now, however, predicted 2D multiferroics are very few and with coexisting yet only loosely coupled (type-I) ferroelectricity and magnetism Here, a type-II multiferroic MXene Hf$_{2}$VC$_{2}$F$_{2}$ monolayer is identified, where ferroelectricity originates directly from its magnetism The noncollinear Y-type spin order generates a polarization perpendicular to the spin helical plane Remarkably, the multiferroic transition is estimated to occur above room temperature Our investigation should open the door to a new branch of 2D materials for pursuit of intrinsically strong magnetoelectricity

Gapless surface Dirac cone in antiferromagnetic topological insulator MnBi$_2$Te$_4$

Abstract: The recent discovered antiferromagnetic topological insulators in Mn-Bi-Te family with intrinsic magnetic ordering have rapidly drawn broad interest since its cleaved surface state is believed to be gapped, hosting the unprecedented axion states with half-integer quantum Hall effect. Here, however, we show unambiguously by using high-resolution angle-resolved photoemission spectroscopy that a gapless Dirac cone at the (0001) surface of MnBi$_2$Te$_4$ exists between the bulk band gap. Such unexpected surface state remains unchanged across the bulk Neel temperature, and is even robust against severe surface degradation, indicating additional topological protection. Through symmetry analysis and $\textit{ab}$-$\textit{initio}$ calculations we consider different types of surface reconstruction of the magnetic moments as possible origins giving rise to such linear dispersion. Our results reveal that the intrinsic magnetic topological insulator hosts a rich platform to realize various topological phases such as topological crystalline insulator and time-reversal-preserved topological insulator, by tuning the magnetic configurations.

2DMatPedia: An open computational database of two-dimensional materials from top-down and bottom-up approaches

Abstract: Two-dimensional (2D) materials have been a hot research topic in the last decade, due to novel fundamental physics in the reduced dimension and appealing applications. Systematic discovery of functional 2D materials has been the focus of many studies. Here, we present a large dataset of 2D materials, with more than 6,000 monolayer structures, obtained from both top-down and bottom-up discovery procedures. First, we screened all bulk materials in the database of Materials Project for layered structures by a topology-based algorithm, and theoretically exfoliate them into monolayers. Then, we generated new 2D materials by chemical substitution of elements in known 2D materials by others from the same group in the periodic table. The structural, electronic and energetic properties of these 2D materials are consistently calculated, to provide a starting point for further material screening, data mining, data analysis and artificial intelligence applications. We present the details of computational methodology, data record and technical validation of our publicly available data (this http URL).

A Piezoelectric, Strain-Controlled Antiferromagnetic Memory Insensitive to Magnetic Fields

Abstract: Spintronic devices based on antiferromagnetic (AFM) materials hold the promise of fast switching speeds and robustness against magnetic fields. Different device concepts have been predicted and experimentally demonstrated, such as low-temperature AFM tunnel junctions that operate as spin-valves, or room-temperature AFM memory, for which either thermal heating in combination with magnetic fields, or Neel spin-orbit torque is used for the information writing process. On the other hand, piezoelectric materials were employed to control magnetism by electric fields in multiferroic heterostructures, which suppresses Joule heating caused by switching currents and may enable low energy-consuming electronic devices. Here, we combine the two material classes to explore changes of the resistance of the high-Neel-temperature antiferromagnet MnPt induced by piezoelectric strain. We find two non-volatile resistance states at room temperature and zero electric field, which are stable in magnetic fields up to 60 T. Furthermore, the strain-induced resistance switching process is insensitive to magnetic fields. Integration in a tunnel junction can further amplify the electroresistance. The tunneling anisotropic magnetoresistance reaches ~11.2% at room temperature. Overall, we demonstrate a piezoelectric, strain-controlled AFM memory which is fully operational in strong magnetic fields and has potential for low-energy and high-density memory applications.

Revealing multiple classes of stable quantum emitters in hexagonal boron nitride with correlated cathodoluminescence, photoluminescence, and strain mapping

Abstract: Single photon emitters (SPEs) in solids have emerged as promising candidates for quantum photonic sensing, communications, and computing. Defects in hexagonal boron nitride (hBN) exhibit high-brightness, room-temperature quantum emission, but their large spectral variability and unknown local structure significantly challenge their technological utility. Here, we directly correlate hBN quantum emission with the material's local strain using a combination of photoluminescence (PL), cathodoluminescence (CL) and nano-beam electron diffraction. Across 40 emitters and 15 samples, we observe zero phonon lines(ZPLs) in PL and CL ranging from 540-720 nm. CL mapping reveals that multiple defects and distinct defect species located within an optically-diffraction-limited region can each contribute to the observed PL spectra. Local strain maps indicate that strain is not required to activate the emitters and is not solely responsible for the observed ZPL spectral range. Instead, four distinct defect classes are responsible for the observed emission range. One defect class has ZPLs near 615 nm with predominantly matched CL-PL responses; it is not a strain-tuned version of another defect class with ZPL emission centered at 580 nm. A third defect class at 650 nm has low visible-frequency CL emission; and a fourth defect species centered at 705 nm has a small, ~10 nm shift between its CL and PL peaks. All studied defects are stable upon both electron and optical irradiation. Our results provide an important foundation for atomic-scale optical characterization of color centers, as well as a foundation for engineering defects with precise emission properties.

Phase-Change Control of Interlayer Exchange Coupling

Abstract: Changing the interlayer exchange coupling between magnetic layers in-situ is a key issue of spintronics, as it allows for the optimization of properties that are desirable for applications, including magnetic sensing and memory. In this paper, we utilize the phase change material VO2 as a spacer layer to regulate the interlayer exchange coupling between ferromagnetic layers with perpendicular magnetic anisotropy. The successful growth of ultra-thin (several nanometres) VO2 films is realized by sputtering at room temperature, which further enables the fabrication of [Pt/Co]2/VO2/[Co/Pt]2 multilayers with distinct interfaces. Such a magnetic multilayer exhibits an evolution from antiferromagnetic coupling to ferromagnetic coupling as the VO2 undergoes a phase change. The underlying mechanism originates from the change in the electronic structure of the spacer layer from an insulating to a metallic state. As a demonstration of phase change spintronics, this work may reveal the great potential of material innovations for next-generation spintronics.

Colossal barocaloric effects near room temperature in plastic crystals of neopentylglycol

Abstract: There is currently great interest in replacing the harmful volatile hydrofluorocarbon fluids used in refrigeration and air-conditioning with solid materials that display magnetocaloric, electrocaloric or mechanocaloric effects. However, the field-driven thermal changes in all of these caloric materials fall short with respect to their fluid counterparts. Here we show that plastic crystals of neopentylglycol (CH3)2C(CH2OH)2 display unprecedentedly large pressure-driven thermal changes near room temperature due to molecular reconfiguration, and that these changes are comparable with those exploited commercially in hydrofluorocarbons. Our discovery of colossal barocaloric effects in a plastic crystal should bring barocaloric materials to the forefront of research and development in order to achieve safe environmentally friendly cooling without compromising performance.

Natural van der Waals heterostructural single crystals with both magnetic and topological properties

Abstract: Heterostructures having both magnetism and topology are promising materials for the realization of exotic topological quantum states while challenging in synthesis and engineering. Here, we report natural magnetic van der Waals heterostructures of (MnBi2Te4)m(Bi2Te3)n that exhibit controllable magnetic properties while maintaining their topological surface states. The interlayer antiferromagnetic exchange coupling is gradually weakened as the separation of magnetic layers increases, and an anomalous Hall effect that is well coupled with magnetization and shows ferromagnetic hysteresis was observed below 5 K. The obtained homogeneous heterostructure with atomically sharp interface and intrinsic magnetic properties will be an ideal platform for studying the quantum anomalous Hall effect, axion insulator states, and the topological magnetoelectric effect.

What makes zeolitic imidazolate frameworks hydrophobic or hydrophilic? The impact of geometry and functionalization on water adsorption

Abstract: We demonstrate, by means of Grand Canonical Monte Carlo simulation on different members of the ZIF family, how topology, geometry, and linker functionalization drastically affect the water adsorption properties of these materials, tweaking the ZIF materials from hydrophobic to hydrophilic. We show that adequate functionalization of the linkers allows one to tune the host-guest interactions, even featuring dual amphiphilic materials whose pore space features both hydrophobic and hydrophilic regions. Starting from an initially hydrophobic material (ZIF-8), various degrees of hydrophilicity could be obtained, with a gradual evolution from a type V adsorption isotherm in the liquid phase to a type I isotherm in the gas phase. This behavior is similar to what was described earlier in families of hydrophobic all-silica zeolites, with hydrophilic "defects" of various strength, such as silanol nests or the presence of extra-framework cations.

Ultrafast transition between exciton phases in van der Waals heterostructures

Abstract: Heterostructures of atomically thin van der Waals bonded monolayers have opened a unique platform to engineer Coulomb correlations, shaping excitonic, Mott insulating, or superconducting phases. In transition metal dichalcogenide heterostructures, electrons and holes residing in different monolayers can bind into spatially indirect excitons with a strong potential for optoelectronics, valleytronics, Bose condensation, superfluidity, and moire-induced nanodot lattices. Yet these ideas require a microscopic understanding of the formation, dissociation, and thermalization dynamics of correlations including ultrafast phase transitions. Here we introduce a direct ultrafast access to Coulomb correlations between monolayers; phase-locked mid-infrared pulses allow us to measure the binding energy of interlayer excitons in WSe2/WS2 hetero-bilayers by revealing a novel 1s-2p resonance, explained by a fully quantum mechanical model. Furthermore, we trace, with subcycle time resolution, the transformation of an exciton gas photogenerated in the WSe2 layer directly into interlayer excitons. Depending on the stacking angle, intra- and interlayer species coexist on picosecond scales and the 1s-2p resonance becomes renormalized. Our work provides a direct measurement of the binding energy of interlayer excitons and opens the possibility to trace and control correlations in novel artificial materials.