scispace - formally typeset
Search or ask a question

Showing papers in "arXiv: Mesoscale and Nanoscale Physics in 2014"


Journal ArticleDOI
Han Liu, Adam T. Neal, Zhen Zhu, David Tománek, Peide D. Ye1 
TL;DR: In this article, a few-layer phosphorene has been introduced as a 2D p-type material for electronic applications, which has an inherent, direct and appreciable band gap that depends on the number of layers.
Abstract: Preceding the current interest in layered materials for electronic applications, research in the 1960's found that black phosphorus combines high carrier mobility with a fundamental band gap. We introduce its counterpart, dubbed few-layer phosphorene, as a new 2D p-type material. Same as graphene and MoS2, phosphorene is flexible and can be mechanically exfoliated. We find phosphorene to be stable and, unlike graphene, to have an inherent, direct and appreciable band-gap that depends on the number of layers. Our transport studies indicate a carrier mobility that reflects its structural anisotropy and is superior to MoS2. At room temperature, our phosphorene field-effect transistors with 1.0 um channel length display a high on-current of 194 mA/mm, a high hole field-effect mobility of 286 cm2/Vs, and an on/off ratio up to 1E4. We demonstrate the possibility of phosphorene integration by constructing the first 2D CMOS inverter of phosphorene PMOS and MoS2 NMOS transistors.

3,846 citations


Journal ArticleDOI
TL;DR: It is shown that light-emitting diodes made by stacking metallic graphene, insulating hexagonal boron nitride and various semiconducting monolayers into complex but carefully designed sequences can also provide the basis for flexible and semi-transparent electronics.
Abstract: The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors5, photovoltaic devices, etc. Here we take the complexity and functionality of such van der Waals heterostructures to the next level by introducing quantum wells (QWs) engineered with one atomic plane precision. We describe light emitting diodes (LEDs) made by stacking up metallic graphene, insulating hexagonal boron nitride (hBN) and various semiconducting monolayers into complex but carefully designed sequences. Our first devices already exhibit extrinsic quantum efficiency of nearly 10% and the emission can be tuned over a wide range of frequencies by appropriately choosing and combining 2D semiconductors (monolayers of transition metal dichalcogenides). By preparing the heterostructures on elastic and transparent substrates, we show that they can also provide the basis for flexible and semi-transparent electronics. The range of functionalities for the demonstrated heterostructures is expected to grow further with increasing the number of available 2D crystals and improving their electronic quality.

1,150 citations


Journal ArticleDOI
TL;DR: In this paper, the single-particle electronic bandgap of single-layer metal dichalcogenides (TMDs) was determined using scanning tunneling spectroscopy (STS) and photoluminescence spectrograms (PL).
Abstract: Two-dimensional (2D) transition metal dichalcogenides (TMDs) exhibit novel electrical and optical properties and are emerging as a new platform for exploring 2D semiconductor physics. Reduced screening in 2D results in dramatically enhanced electron-electron interactions, which have been predicted to generate giant bandgap renormalization and excitonic effects. Currently, however, there is little direct experimental confirmation of such many-body effects in these materials. Here we present an experimental observation of extraordinarily large exciton binding energy in a 2D semiconducting TMD. We accomplished this by determining the single-particle electronic bandgap of single-layer MoSe2 via scanning tunneling spectroscopy (STS), as well as the two-particle exciton transition energy via photoluminescence spectroscopy (PL). These quantities yield an exciton binding energy of 0.55 eV for monolayer MoSe2, a value that is orders of magnitude larger than what is seen in conventional 3D semiconductors. This finding is corroborated by our ab initio GW and Bethe Salpeter equation calculations, which include electron correlation effects. The renormalized bandgap and large exciton binding observed here will have a profound impact on electronic and optoelectronic device technologies based on single-layer semiconducting TMDs.

1,027 citations


Journal ArticleDOI
TL;DR: A few-layer black phosphorus field effect devices on Si/SiO$_2$ and measure charge carrier mobility in a four-probe configuration as well as drain current modulation in a two-point configuration are presented in this paper.
Abstract: Black phosphorus exhibits a layered structure similar to graphene, allowing mechanical exfoliation of ultrathin single crystals. Here we demonstrate few-layer black phosphorus field effect devices on Si/SiO$_2$ and measure charge carrier mobility in a four-probe configuration as well as drain current modulation in a two-point configuration. We find room-temperature mobilities of up to 300 cm$^2$/Vs and drain current modulation of over 10$^3$. At low temperatures the on-off ratio exceeds 10$^5$ and the device exhibits both electron and hole conduction. Using atomic force microscopy we observe significant surface roughening of thin black phosphorus crystals over the course of 1 hour after exfoliation.

1,019 citations


Journal ArticleDOI
TL;DR: In this paper, the authors show that the anisotropic conductance of monolayer phosphorene can be controlled by simple strain conditions, and with the appropriate biaxial or uniaxially strain, they can rotate the preferred conducting direction by 90 degrees.
Abstract: Newly fabricated monolayer phosphorene and its few-layer structures are expected to be promising for electronic and optical applications because of their finite direct band gaps and sizable but anisotropic electronic mobility. By first-principles simulations, we show that this unique anisotropic conductance can be controlled by using simple strain conditions. With the appropriate biaxial or uniaxial strain, we can rotate the preferred conducting direction by 90 degrees. This will be of useful for exploring quantum Hall effects, and exotic electronic and mechanical applications based on phosphorene.

902 citations


Journal ArticleDOI
TL;DR: Graphene plasmons are rapidly emerging as a viable tool for fast electrical manipulation of light as mentioned in this paper, and the prospects for applications to electro-optical modulation, optical sensing, quantum plasmonics, light harvesting, spectral photometry, and tunable lighting at the nanoscale are further stimulated by the relatively low level of losses and high degree of spatial confinement that characterize these excitations compared with conventional plasmic materials.
Abstract: Graphene plasmons are rapidly emerging as a viable tool for fast electrical manipulation of light. The prospects for applications to electro-optical modulation, optical sensing, quantum plasmonics, light harvesting, spectral photometry, and tunable lighting at the nanoscale are further stimulated by the relatively low level of losses and high degree of spatial confinement that characterize these excitations compared with conventional plasmonic materials. We start with a general description of the plasmons in extended graphene, followed by analytical methods that lead to reasonably accurate estimates of both the plasmon energies and the strengths of coupling to external light in graphene nanostructures, including graphene ribbons. We discuss several possible strategies to extend these plasmons towards the visible and near infrared, including a reduction in the size of the graphene structures and an increase in the level of doping. Specifically, we discuss plasmons in narrow ribbons and molecular-size graphene structures. We further formulate prescriptions based on geometry to increase the level of electrostatic doping without causing electrical breakdown. Results are also presented for plasmons in highly-doped single-wall carbon nanotubes, which exhibit similar characteristics as narrow ribbons and show a relatively small dependence on the chirality of the tubes. We further discuss perfect light absorption by a single-atom carbon layer, which we illustrate by investigating arrays of ribbons using fully analytical expressions. Finally, we explore the possibility of exploiting optically pumped transient plasmons in graphene, whereby the optically heated graphene valence band can sustain collective plasmon oscillations similar to those of highly doped graphene, and well-defined during the picosecond time window over which the electron is at an elevated temperature.

900 citations


Posted Content
TL;DR: In this paper, the authors reveal highly anisotropic and tightly bound excitons in monolayer black phosphorus using polarization-resolved photoluminescence measurements at room temperature.
Abstract: Semi-metallic graphene and semiconducting monolayer transition metal dichalcogenides (TMDCs) are the two-dimensional (2D) materials most intensively studied in recent years. Recently, black phosphorus emerged as a promising new 2D material due to its widely tunable and direct bandgap, high carrier mobility and remarkable in-plane anisotropic electrical, optical and phonon properties. However, current progress is primarily limited to its thin-film form, and its unique properties at the truly 2D quantum confinement have yet to be demonstrated. Here, we reveal highly anisotropic and tightly bound excitons in monolayer black phosphorus using polarization-resolved photoluminescence measurements at room temperature. We show that regardless of the excitation laser polarization, the emitted light from the monolayer is linearly polarized along the light effective mass direction and centers around 1.3 eV, a clear signature of emission from highly anisotropic bright excitons. In addition, photoluminescence excitation spectroscopy suggests a quasiparticle bandgap of 2.2 eV, from which we estimate an exciton binding energy of around 0.9 eV, consistent with theoretical results based on first-principles. The experimental observation of highly anisotropic, bright excitons with exceedingly large binding energy not only opens avenues for the future explorations of many-electron effects in this unusual 2D material, but also suggests a promising future in optoelectronic devices such as on-chip infrared light sources.

856 citations


Journal ArticleDOI
TL;DR: This Article exploits near-field microscopy to image propagating plasmons in high-quality graphene encapsulated between two films of hexagonal boron nitride (h-BN), and finds unprecedentedly low plasmon damping combined with strong field confinement and confirms the high uniformity of this plAsmonic medium.
Abstract: Graphene plasmons were predicted to possess ultra-strong field confinement and very low damping at the same time, enabling new classes of devices for deep subwavelength metamaterials, single-photon nonlinearities, extraordinarily strong light-matter interactions and nano-optoelectronic switches. While all of these great prospects require low damping, thus far strong plasmon damping was observed, with both impurity scattering and many-body effects in graphene proposed as possible explanations. With the advent of van der Waals heterostructures, new methods have been developed to integrate graphene with other atomically flat materials. In this letter we exploit near-field microscopy to image propagating plasmons in high quality graphene encapsulated between two films of hexagonal boron nitride (h-BN). We determine dispersion and particularly plasmon damping in real space. We find unprecedented low plasmon damping combined with strong field confinement, and identify the main damping channels as intrinsic thermal phonons in the graphene and dielectric losses in the h-BN. The observation and in-depth understanding of low plasmon damping is the key for the development of graphene nano-photonic and nano-optoelectronic devices.

679 citations


Journal ArticleDOI
TL;DR: In this article, the dispersion of the valence and conduction bands at their extrema (the $K, $Q, $Gamma, and $M$ points of the hexagonal Brillouin zone) in atomic crystals of semiconducting monolayer transition metal dichalcogenides is described.
Abstract: We present $\mathbf{k}\cdotp\mathbf{p}$ Hamiltonians parametrised by {\it ab initio} density functional theory calculations to describe the dispersion of the valence and conduction bands at their extrema (the $K$, $Q$, $\Gamma$, and $M$ points of the hexagonal Brillouin zone) in atomic crystals of semiconducting monolayer transition metal dichalcogenides. We review the parametrisation of the essential parts of the $\mathbf{k}\cdotp\mathbf{p}$ Hamiltonians for MoS$_2$, MoSe$_2$, WS$_2$, and WSe$_2$, including the spin-splitting and spin-polarisation of the bands, and we discuss the vibrational properties of these materials. We then use $\mathbf{k}\cdotp\mathbf{p}$ theory to analyse optical transitions in two-dimensional transition metal dichalcogenides over a broad spectral range that covers the Van Hove singularities in the band structure (the $M$ points). We also discuss the visualisation of scanning tunnelling microscopy maps.

618 citations


Posted Content
TL;DR: The monolayer film is composed of coalescing single islands with limited numbers of lattice orientation due to an epitaxial growth mechanism, and local potential mapping along channels in field-effect transistors shows that the single-crystal MoS2 grains in the film are well connected, with interfaces that do not degrade the electrical conductivity.
Abstract: Two-dimensional semiconductors such as MoS2 are an emerging material family with wide-ranging potential applications in electronics, optoelectronics and energy harvesting. Large-area growth methods are needed to open the way to the applications. While significant progress to this goal was made, control over lattice orientation during growth still remains a challenge. This is needed in order to minimize or even avoid the formation of grain boundaries which can be detrimental to electrical, optical and mechanical properties of MoS2 and other 2D semiconductors. Here, we report on the uniform growth of high-quality centimeter-scale continuous monolayer MoS2 with control over lattice orientation. Using transmission electron microscopy we show that the monolayer film is composed of coalescing single islands that share a predominant lattice orientation due to an epitaxial growth mechanism. Raman and photoluminescence spectra confirm the high quality of the grown material. Optical absorbance spectra acquired over large areas show new features in the high-energy part of the spectrum, indicating that MoS2 could also be interesting for harvesting this region of the solar spectrum and fabrication of UV-sensitive photodetectors. Even though the interaction between the growth substrate and MoS2 is strong enough to induce lattice alignment, we can easily transfer the grown material and fabricate field-effect transistors on SiO2 substrates showing mobility superior to the exfoliated material.

604 citations


Journal ArticleDOI
TL;DR: In this article, a comprehensive first-principles study of the electronic properties of low-dimensional phosphorene nanostructures is performed, and the tensile strain and electric-field effects on electronic properties are also investigated.
Abstract: We perform a comprehensive first-principles study of the electronic properties of phosphorene nanoribbons, phosphorene nanotubes, multilayer phosphorene, and heterobilayers of phosphorene and two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayer. The tensile strain and electric-field effects on electronic properties of low-dimensional phosphorene nanostructures are also investigated. Our calculations show that zigzag phosphorene nanoribbons (z-PNRs) are metals, regardless of the ribbon width while armchair phosphorene nanoribbons (a-PNRs) are semiconductors with indirect bandgaps and the bandgaps are insensitive to variation of the ribbon width. We find that tensile compression (or expansion) strains can reduce (or increase) the bandgap of the a-PNRs while an in-plane electric field can significantly reduce the bandgap of a-PNRs, leading to the semiconductor-to-metal transition beyond certain electric field. For single-walled phosphorene nanotubes (SW-PNTs), both armchair and zigzag nanotubes are semiconductors with direct bandgaps. With either tensile strains or transverse electric field, similar behavior of bandgap modulation can arise as that for a-PNRs. It is known that multilayer phosphorene sheets are semiconductors with their bandgaps decreasing with increasing the number of multilayers. In the presence of a vertical electric field, the bandgaps of multilayer phosphorene sheets decrease with increasing the electric field, and the bandgap modulation is more significant with more layers. Lastly, heterobilayers of phosporene with a TMDC (MoS2 or WS2) monolayer are still semiconductors while their bandgaps can be reduced by applying a vertical electric field as well.

Posted Content
TL;DR: The observation of zero-dimensional anharmonic quantum emitters in monolayer tungsten diselenide with an energy that is 20-100 meV lower than that of two-dimensional excitons shows that the quantum dots have singlet ground states and an anisotropic confinement that is most probably induced by impurities or defects.
Abstract: Semiconductor quantum dots have emerged as promising candidates for implementation of quantum information processing since they allow for a quantum interface between stationary spin qubits and propagating single photons. In the meanwhile, transition metal dichalcogenide (TMD) monolayers have moved to the forefront of solid-state research due to their unique band structure featuring a large band gap with degenerate valleys and non-zero Berry curvature. Here we report the observation of quantum dots in monolayer tungsten-diselenide with an energy that is 20 to 100 meV lower than that of two dimensional excitons. Photon antibunching in second-order photon correlations unequivocally demonstrates the zero-dimensional anharmonic nature of these quantum emitters. The strong anisotropic magnetic response of the spatially localized emission peaks strongly indicates that radiative recombination stems from localized excitons that inherit their electronic properties from the host TMD. The large $\sim$ 1 meV zero-field splitting shows that the quantum dots have singlet ground states and an anisotropic confinement most likely induced by impurities or defects in the host TMD. Electrical control in van der Waals heterostructures and robust spin-valley degree of freedom render TMD quantum dots promising for quantum information processing.

Journal ArticleDOI
TL;DR: In this article, the electronic transport properties of individual crystallites of high quality CVD-grown monolayer MoS2 were investigated, and it was shown that the short-range scattering plays a dominant role in the highly conducting regime at low temperatures.
Abstract: Recent success in the growth of monolayer MoS2 via chemical vapor deposition (CVD) has opened up prospects for the implementation of these materials into thin film electronic and optoelectronic devices. Here, we investigate the electronic transport properties of individual crystallites of high quality CVD-grown monolayer MoS2. The devices show low temperature mobilities up to 500 cm 2 V −1 s −1 and a clear signature of metallic conduction at high doping densities. These characteristics are comparable to the electronic properties of the best mechanically exfoliated monolayers in literature, verifying the high electronic quality of the CVD- grown materials. We analyze the different scattering mechanisms and show that the short-range scattering plays a dominant role in the highly conducting regime at low temperatures. Additionally, the influence of optical phonons as a limiting factor is discussed.

Journal ArticleDOI
TL;DR: In this paper, the authors report the characterization of photoluminescence and optical spin polarization from single silicon vacancies in SiC, and demonstrate that single spins can be addressed at room temperature.
Abstract: Spins in solids are cornerstone elements of quantum spintronics. Leading contenders such as defects in diamond, or individual phosphorous dopants in silicon have shown spectacular progress but either miss established nanotechnology or an efficient spin-photon interface. Silicon carbide (SiC) combines the strength of both systems: It has a large bandgap with deep defects and benefits from mature fabrication techniques. Here we report the characterization of photoluminescence and optical spin polarization from single silicon vacancies in SiC, and demonstrate that single spins can be addressed at room temperature. We show coherent control of a single defect spin and find long spin coherence time under ambient conditions. Our study provides evidence that SiC is a promising system for atomic-scale spintronics and quantum technology.

Journal ArticleDOI
TL;DR: A model for carrier recombination dynamics that quantitatively explains all features of the data for different temperatures and pump fluences is presented and underscores the important role played by Auger processes in two-dimensional atomic materials.
Abstract: In this letter, we present non-degenerate ultrafast optical pump-probe studies of the carrier recombination dynamics in MoS$_{2}$ monolayers. By tuning the probe to wavelengths much longer than the exciton line, we make the probe transmission sensitive to the total population of photoexcited electrons and holes. Our measurement reveals two distinct time scales over which the photoexcited electrons and holes recombine; a fast time scale that lasts $\sim$2 ps and a slow time scale that lasts longer than $\sim$100 ps. The temperature and the pump fluence dependence of the observed carrier dynamics are consistent with defect-assisted recombination as being the dominant mechanism for electron-hole recombination in which the electrons and holes are captured by defects via Auger processes. Strong Coulomb interactions in two dimensional atomic materials, together with strong electron and hole correlations in two dimensional metal dichalcogenides, make Auger processes particularly effective for carrier capture by defects. We present a model for carrier recombination dynamics that quantitatively explains all features of our data for different temperatures and pump fluences. The theoretical estimates for the rate constants for Auger carrier capture are in good agreement with the experimentally determined values. Our results underscore the important role played by Auger processes in two dimensional atomic materials.

Posted Content
TL;DR: In this article, Zhao et al. explored water permeation in graphene oxide membranes using atomistic simulations, by considering flow through interlayer gallery, expanded pores such as wrinkles of interedge spaces, and pores within the sheet.
Abstract: Water transport through graphene-derived membranes has gained much interest recently due to its promising potential in filtration and separation applications. In this work, we explore water permeation in graphene oxide membranes using atomistic simulations, by considering flow through interlayer gallery, expanded pores such as wrinkles of interedge spaces, and pores within the sheet. We find that although flow enhancement can be established by nanoconfinement, fast water transport through pristine graphene channels is prohibited by a prominent side-pinning effect from capillaries formed between oxidized regions. We then discuss flow enhancement in situations according to several recent experiments. These understandings are finally integrated into a complete picture to understand water permeation through the layer-by-layer and porous microstructure and could guide rational design of functional membranes for energy and environmental applications.

Journal ArticleDOI
TL;DR: In this paper, the authors present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors.
Abstract: With advances in exfoliation and synthetic techniques, atomically thin films of semiconducting transition metal dichalcogenides have recently been isolated and characterized. Their two-dimensional structure, coupled with a direct band gap in the visible portion of the electromagnetic spectrum, suggests suitability for digital electronics and optoelectronics. Towards that end, several classes of high-performance devices have been reported along with significant progress in understanding their physical properties. Here, we present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors. By critically assessing and comparing the performance of these devices with competing technologies, the merits and shortcomings of this emerging class of electronic materials are identified, thereby providing a roadmap for future development.

Journal ArticleDOI
TL;DR: In this article, the relationship between surface scattering properties, the bulk band properties, and the formation of interface states is investigated, which can enable the design of systems with interface states in a rational manner.
Abstract: Surface impedance is an important concept in classical wave systems such as photonic crystals (PCs). For example, the condition of an interface state formation in the interfacial region of two different one-dimensional PCs is simply Z_SL +Z_SR=0, where Z_SL (Z_SR)is the surface impedance of the semi-infinite PC on the left- (right-) hand side of the interface. Here, we also show a rigorous relation between the surface impedance of a one-dimensional PC and its bulk properties through the geometrical (Zak) phases of the bulk bands, which can be used to determine the existence or non-existence of interface states at the interface of the two PCs in a particular band gap. Our results hold for any PCs with inversion symmetry, independent of the frequency of the gap and the symmetry point where the gap lies in the Brillouin Zone. Our results provide new insights on the relationship between surface scattering properties, the bulk band properties and the formation of interface states, which in turn can enable the design of systems with interface states in a rational manner.

Journal ArticleDOI
TL;DR: In this article, the properties of field effect transistors based on few layers of chemical vapor transport grown alpha-MoTe_2 crystals mechanically exfoliated onto SiO_2 were reported.
Abstract: Here we report the properties of field-effect transistors based on few layers of chemical vapor transport grown alpha- MoTe_2 crystals mechanically exfoliated onto SiO_2. We performed field-effect and Hall mobility measurements, as well as Raman scattering and transmission electron microscopy. In contrast to both MoS_2 and MoSe_2, our MoTe_2 field-effect transistors (FETs) are observed to be hole-doped, displaying on/off ratios surpassing 106 and typical sub-threshold swings of ~ 140 mV per decade. Both field-effect and Hall mobilities indicate maximum values approaching or surpassing 10 cm^2/Vs which are comparable to figures previously reported for single or bi-layered MoS_2 and/or for MoSe_2 exfoliated onto SiO_2 at room temperature and without the use of dielectric engineering. Raman scattering reveals sharp modes in agreement with previous reports, whose frequencies are found to display little or no dependence on the number of layers. Given that both MoS_2 is electron doped, the stacking of MoTe_2 onto MoS_2 could produce ambipolar field-effect transistors and a gap modulation. Although the overall electronic performance of MoTe_2 is comparable to those of MoS_2 and MoSe_2, the heavier element Te should lead to a stronger spin orbit-coupling and possibly to concomitantly longer decoherence times for exciton valley and spin indexes.

Journal ArticleDOI
TL;DR: In this article, the authors demonstrate that the undesirable effects such as screening and disorder in currently available specimens mask many anticipated physical phenomena and limit device applications of semiconducting monolayer transition-metal dichalcogenides.
Abstract: The optical response of semiconducting monolayer transition-metal dichalcogenides (TMDCs) is dominated by strongly bound excitons that are stable even at room temperature. However, substrate-related effects such as screening and disorder in currently available specimens mask many anticipated physical phenomena and limit device applications of TMDCs. Here, we demonstrate that that these undesirable effects are strongly suppressed in suspended devices. Extremely robust (photogain >1,000) and fast (response time 570meV. Along with band-edge excitons, we observe excitons associated with a van Hove singularity of rather unique nature. The analysis of the source-drain voltage dependence of photocurrent spectra reveals exciton dissociation and photoconversion mechanisms in TMDCs.

Journal ArticleDOI
TL;DR: In this article, the authors demonstrate the gigahertz frequency operation of layered black phosphorus field effect transistors for the first time, achieving a current density in excess of 270 mA/mm and DC transconductance above 180 mS/mm for hole conduction.
Abstract: Few-layer and thin film forms of layered black phosphorus (BP) have recently emerged as a promising material for applications in high performance nanoelectronics and infrared optoelectronics. Layered BP thin film offers a moderate bandgap of around 0.3 eV and high carrier mobility, leading to transistors with decent on-off ratio and high on-state current density. Here, we demonstrate the gigahertz frequency operation of black phosphorus field-effect transistors for the first time. The BP transistors demonstrated here show excellent current saturation with an on-off ratio exceeding 2000. We achieved a current density in excess of 270 mA/mm and DC transconductance above 180 mS/mm for hole conduction. Using standard high frequency characterization techniques, we measured a short-circuit current-gain cut-off frequency fT of 12 GHz and a maximum oscillation frequency fmax of 20 GHz in 300 nm channel length devices. BP devices may offer advantages over graphene transistors for high frequency electronics in terms of voltage and power gain due to the good current saturation properties arising from their finite bandgap, thus enabling the future ubiquitous transistor technology that can operate in the multi-GHz frequency range and beyond.

Journal ArticleDOI
TL;DR: In this paper, the authors demonstrate the feasibility of singular visible-light nanooptics which exploits the benefits of both plasmonic field enhancement and non-trivial topology of light phase.
Abstract: Non-trivial topology of phase is crucial for many important physics phenomena such as, for example, the Aharonov-Bohm effect 1 and the Berry phase 2. Light phase allows one to create "twisted" photons 3, 4 , vortex knots 5, dislocations 6 which has led to an emerging field of singular optics relying on abrupt phase changes 7. Here we demonstrate the feasibility of singular visible-light nanooptics which exploits the benefits of both plasmonic field enhancement and non-trivial topology of light phase. We show that properly designed plasmonic nanomaterials exhibit topologically protected singular phase behaviour which can be employed to radically improve sensitivity of detectors based on plasmon resonances. By using reversible hydrogenation of graphene 8 and a streptavidin-biotin test 9, we demonstrate areal mass sensitivity at a level of femto-grams per mm2 and detection of individual biomolecules, respectively. Our proof-of-concept results offer a way towards simple and scalable single-molecular label-free biosensing technologies.

Journal ArticleDOI
TL;DR: In this article, the authors used scanning tunneling microscopy (STM) and spectroscopy with gating capabilities to measure the bandgap and the position of the Fermi energy (EF) in MoS2, and to track its evolution with gate voltage.
Abstract: The discovery of graphene has put the spotlight on other layered materials including transition metal dichalcogenites (TMD) as building blocks for novel heterostructures assembled from stacked atomic layers. Molybdenum disulfide, MoS2, a semiconductor in the TMD family, with its remarkable thermal and chemical stability and high mobility, has emerged as a promising candidate for post-silicon applications such as switching, photonics, and flexible electronics. Since these rely on controlling the position of the Fermi energy (EF), it is crucial to understand its dependence on doping and gating. Here we employed scanning tunneling microscopy (STM) and spectroscopy (STS) with gating capabilities to measure the bandgap and the position of EF in MoS2, and to track its evolution with gate voltage. For bulk samples, the measured bandgap (~1.3eV) is comparable to the value obtained by photoluminescence, and the position of EF (~0.35eV) below the conduction band, is consistent with n-doping reported in this material. Using topography together with spectroscopy we traced the source of the ndoping in bulk MoS2 samples to point defects, which we attribute to S vacancies. In contrast, for thin films deposited on SiO2, we found significantly higher levels of ndoping that cannot be attributed to S vacancies. By combining gated STS with transport measurements in a field effect transistor (FET) configuration, we demonstrate that the higher levels of n-doping in thin film samples is due to charge traps at the samplesubstrate interface.

Journal ArticleDOI
TL;DR: In this article, the ballistic thermal transport in single-layer phosphorene was investigated using first-principles calculations and non-equilibrium Green's function method, and it was shown that the thermal conductance anisotropy with the orientation can be tuned by applying strain.
Abstract: Using first-principles calculations and non-equilibrium Green's function method, we investigate the ballistic thermal transport in single-layer phosphorene. A significant crystallographic orientation dependence of thermal conductance is observed, with room temperature thermal conductance along zigzag direction being 40 percent higher than that along armchair direction. Furthermore, we find that the thermal conductance anisotropy with the orientation can be tuned by applying strain. In particular, the zigzag-oriented thermal conductance is enhanced when a zigzag-oriented strain is applied but decreases when an armchair-oriented strain is applied; whereas the armchair-oriented thermal conductance always decreases when either a zigzag- or an armchair-oriented strain is applied. The present work suggests that the remarkable thermal transport anisotropy and its strain-modulated effect in single-layer phosphorene may be used for thermal management in phosphorene-based electronics and optoelectronic devices.

Journal ArticleDOI
TL;DR: In this article, density functional theory is employed to explore the potential application of recently synthesized two dimensional phosphorene as electrode materials, and it is shown that Li atoms can bind strongly with two-dimensional polysilicon monolayer and double layer with significant electron transfer.
Abstract: The capacity and stability of constituent electrodes determine the performance of Li-ion batteries. In this study, density functional theory is employed to explore the potential application of recently synthesized two dimensional phosphorene as electrode materials. Our results show that Li atoms can bind strongly with phosphorene monolayer and double layer with significant electron transfer. Besides, the structure of phosphorene is not much influenced by lithiation and the volume change is only 0.2\%. A semiconducting to metallic transition is observed after lithiation. The diffusion barrier is calculated to 0.76 and 0.72 eV on monolayer and double layer phosphorene. The theoretical specific capacity of phosphorene monolayer is 432.79 mAh/g, which is larger than other commercial anodes materials. Our findings show that the high capacity, low open circuit voltage, small volume change and electrical conductivity of phosphorene make it a good candidate as electrode material.

Journal ArticleDOI
TL;DR: In this article, the authors extend the analysis of metal-silicon Schottky junctions by using graphene, an atomically thin semimetal, and show that a fundamentally new transport model is needed to describe the graphene-sensor Schottkky junction.
Abstract: The proper understanding of semiconductor devices begins at the metal-semiconductor interface. The metal/semiconductor interface itself can also be an important device, as Schottky junctions often forms when the doping in the semiconductors is low. Here, we extend the analysis of metal-silicon Schottky junctions by using graphene, an atomically thin semimetal. We show that a fundamentally new transport model is needed to describe the graphene-silicon Schottky junction. While the current-voltage behavior follows the celebrated ideal diode behavior, the details of the diode characteristics is best characterized by the Landauer transport formalism, suggesting that the injection rate from graphene ultimately determines the transport properties of this new Schottky junction.

Journal ArticleDOI
TL;DR: In this article, the degradation process of exfoliated black phosphorus flakes is investigated in the presence of ambient conditions. And the authors show that the degradation occurs more rapidly on hydrophobic octadecyltrichlorosilosilane self-assembled monolayers and on H-Si(111).
Abstract: Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecyltrichlorosilane self-assembled monolayers and on H-Si(111), versus hydrophilic SiO2. For unencapsulated BP field-effect transistors, the ambient degradation causes large increases in threshold voltage after 6 hours in ambient, followed by a ~10^3 decrease in FET current on/off ratio and mobility after 48 hours. Atomic layer deposited AlOx overlayers effectively suppress ambient degradation, allowing encapsulated BP FETs to maintain high on/off ratios of ~10^3 and mobilities of ~100 cm2/(V*s) for over two weeks in ambient. This work shows that the ambient degradation of BP can be managed effectively when the flakes are sufficiently passivated. In turn, our strategy for enhancing BP environmental stability will accelerate efforts to implement BP in electronic and optoelectronic applications.

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the electric properties of phosphorene nanoribbons based on the tight-binding model and found that the quasi-flat bands can be controlled by applying in-plane electric field perpendicular to the ribbon direction.
Abstract: Phosphorene, a honeycomb structure of black phosphorus, was isolated recently. We investigate electric properties of phosphorene nanoribbons based on the tight-binding model. A prominent feature is the presence of quasi-flat edge bands entirely detached from the bulk band. We explore the mechanism of the emergence of the quasi-flat bands analytically and numerically from the flat bands well known in graphene by a continuous deformation of a honeycomb lattice. The quasi-flat bands can be controlled by applying in-plane electric field perpendicular to the ribbon direction. The conductance is switched off above a critical electric field, which acts as a field-effect transistor. The critical electric field is anti-proportional to the width of a nanoribbon. This results will pave a way toward nanoelectronics based on phosphorene.

Journal ArticleDOI
TL;DR: In this paper, the authors present a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm such as an error correcting code, in a configuration that distributes components of the control system across different temperature stages of a dilution refrigerator, as determined by the available cooling power.
Abstract: Solid-state qubits have recently advanced to the level that enables them, in-principle, to be scaled-up into fault-tolerant quantum computers. As these physical qubits continue to advance, meeting the challenge of realising a quantum machine will also require the engineering of new classical hardware and control architectures with complexity far beyond the systems used in today's few-qubit experiments. Here, we report a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm such as an error correcting code. We demonstrate the basic principles of this architecture in a configuration that distributes components of the control system across different temperature stages of a dilution refrigerator, as determined by the available cooling power. The combined setup includes a cryogenic field-programmable gate array (FPGA) controlling a switching matrix at 20 millikelvin which, in turn, manipulates a semiconductor qubit.

Journal ArticleDOI
TL;DR: In this article, coupled micropillars are etched out of a semiconductor microcavity to engineer a spin-orbit Hamiltonian for photons and polaritons in a microstructure.
Abstract: One of the most fundamental properties of electromagnetism and special relativity is the coupling between the spin of an electron and its orbital motion. This is at the origin of the fine structure in atoms, the spin Hall effect in semiconductors, and underlies many intriguing properties of topological insulators, in particular their chiral edge states. Configurations where neutral particles experience an effective spin-orbit coupling have been recently proposed and realized using ultracold atoms and photons. Here we use coupled micropillars etched out of a semiconductor microcavity to engineer a spin-orbit Hamiltonian for photons and polaritons in a microstructure. The coupling between the spin and orbital momentum arises from the polarisation dependent confinement and tunnelling of photons between micropillars arranged in the form of a hexagonal photonic molecule. Dramatic consequences of the spin-orbit coupling are experimentally observed in these structures in the wavefunction of polariton condensates, whose helical shape is directly visible in the spatially resolved polarisation patterns of the emitted light. The strong optical nonlinearity of polariton systems suggests exciting perspectives for using quantum fluids of polaritons11 for quantum simulation of the interplay between interactions and spin-orbit coupling.