Showing papers in "arXiv: Robotics in 2007"

Architecture Optimization of a 3-DOF Translational Parallel Mechanism for Machining Applications, the Orthoglide

Abstract: This paper addresses the architecture optimization of a 3-DOF translational parallel mechanism designed for machining applications. The design optimization is conducted on the basis of a prescribed Cartesian workspace with prescribed kinetostatic performances. The resulting machine, the Orthoglide, features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The interesting features of the Orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. A small-scale prototype of the Orthoglide under development is presented at the end of this paper.

Parametric stiffness analysis of the Orthoglide

Abstract: This paper presents a parametric stiffness analysis of the Orthoglide, a 3-DOF translational Parallel Kinematic Machine. First, a compliant modeling of the Orthoglide is conducted based on an existing method. Then stiffness matrix is symbolically computed. This allows one to easily study the influence of the geometric design parameters on the matrix elements. Critical links are displayed. Cutting forces are then modeled so that static displacements of the Orthoglide tool during slot milling are symbolically computed. Influence of the geometric design parameters on the static displacements is checked as well. Other machining operations can be modeled. This parametric stiffness analysis can be applied to any parallel manipulator for which stiffness is a critical issue.

Working and Assembly Modes of the Agile Eye

Abstract: This paper deals with the in-depth kinematic analysis of a special spherical parallel wrist, called the Agile Eye. The Agile Eye is a three-legged spherical parallel robot with revolute joints in which all pairs of adjacent joint axes are orthogonal. Its most peculiar feature, demonstrated in this paper for the first time, is that its (orientation) workspace is unlimited and flawed only by six singularity curves (rather than surfaces). Furthermore, these curves correspond to self-motions of the mobile platform. This paper also demonstrates that, unlike for any other such complex spatial robots, the four solutions to the direct kinematics of the Agile Eye (assembly modes) have a simple geometric relationship with the eight solutions to the inverse kinematics (working modes).

Kinematics and Workspace Analysis of a Three-Axis Parallel Manipulator: the Orthoglide

Abstract: The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which moves in the Cartesian x-y-z space with fixed orientation. New solutions to solve inverse/direct kinematics are proposed and we perform a detailed workspace and singularity analysis, taking into account specific joint limit constraints.

Sensitivity Analysis of the Orthoglide, a 3-DOF Translational Parallel Kinematic Machine

Abstract: This paper presents a sensitivity analysis of the Orthoglide, a 3-DOF translational Parallel Kinematic Machine. Two complementary methods are developed to analyze its sensitivity to its dimensional and angular variations. First, a linkage kinematic analysis method is used to have a rough idea of the influence of the dimensional variations on the location of the end-effector. Besides, this method shows that variations in the design parameters of the same type from one leg to the other have the same influence on the end-effector. However, this method does not take into account the variations in the parallelograms. Thus, a differential vector method is used to study the influence of the dimensional and angular variations in the parts of the manipulator on the position and orientation of the end-effector, and particularly the influence of the variations in the parallelograms. It turns out that the kinematic isotropic configuration of the manipulator is the least sensitive one to its dimensional and angular variations. On the contrary, the closest configurations to its kinematic singular configurations are the most sensitive ones to geometrical variations.

Degeneracy study of the forward kinematics of planar 3-RPR parallel manipulators

Abstract: This paper investigates two situations in which the forward kinematics of planar 3-RPR parallel manipulators degenerates. These situations have not been addressed before. The first degeneracy arises when the three input joint variables r1, r2 and r3 satisfy a certain relationship. This degeneracy yields a double root of the characteristic polynomial in t, which could be erroneously interpreted as two coalesce assembly modes. But, unlike what arises in non-degenerate cases, this double root yields two sets of solutions for the position coordinates (x, y) of the platform. In the second situation, we show that the forward kinematics degenerates over the whole joint space if the base and platform triangles are congruent and the platform triangle is rotated by 180 deg about one of its sides. For these "degenerate" manipulators, which are defined here for the first time, the forward kinematics is reduced to the solution of a 3rd-degree polynomial and a quadratics in sequence. Such manipulators constitute, in turn, a new family of analytic planar manipulators that would be more suitable for industrial applications.

Target assignment for robotic networks: asymptotic performance under limited communication

Abstract: We are given an equal number of mobile robotic agents, and distinct target locations. Each agent has simple integrator dynamics, a limited communication range, and knowledge of the position of every target. We address the problem of designing a distributed algorithm that allows the group of agents to divide the targets among themselves and, simultaneously, leads each agent to reach its unique target. We do not require connectivity of the communication graph at any time. We introduce a novel assignment-based algorithm with the following features: initial assignments and robot motions follow a greedy rule, and distributed refinements of the assignment exploit an implicit circular ordering of the targets. We prove correctness of the algorithm, and give worst-case asymptotic bounds on the time to complete the assignment as the environment grows with the number of agents. We show that among a certain class of distributed algorithms, our algorithm is asymptotically optimal. The analysis utilizes results on the Euclidean traveling salesperson problem.

A Comparative Study of Parallel Kinematic Architectures for Machining Applications

Abstract: Parallel kinematic mechanisms are interesting alternative designs for machining applications. Three 2-DOF parallel mechanism architectures dedicated to machining applications are studied in this paper. The three mechanisms have two constant length struts gliding along fixed linear actuated joints with different relative orientation. The comparative study is conducted on the basis of a same prescribed Cartesian workspace for the three mechanisms. The common desired workspace properties are a rectangular shape and given kinetostatic performances. The machine size of each resulting design is used as a comparative criterion. The 2-DOF machine mechanisms analyzed in this paper can be extended to 3-axis machines by adding a third joint.

The Kinematic Analysis of a Symmetrical Three-Degree-of-Freedom Planar Parallel Manipulator

Abstract: Presented in this paper is the kinematic analysis of a symmetrical three-degree-of-freedom planar parallel manipulator. In opposite to serial manipulators, parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. This property produces more complicated kinematic models but allows more flexibility in trajectory planning. To take into account this property, the notion of aspects, i.e. the maximal singularity-free domains, was introduced, based on the notion of working modes, which makes it possible to separate the inverse kinematic solutions. The aim of this paper is to show that a non-singular assembly-mode changing trajectory exist for a symmetrical planar parallel manipulator, with equilateral base and platform triangle.

Singular curves and cusp points in the joint space of 3-RPR parallel manipulators

Abstract: This paper investigates the singular curves in two-dimensional slices of the joint space of a family of planar parallel manipulators. It focuses on special points, referred to as cusp points, which may appear on these curves. Cusp points play an important role in the kinematic behavior of parallel manipulators since they make possible a nonsingular change of assembly mode. The purpose of this study is twofold. First, it reviews an important previous work, which, to the authors' knowledge, has never been exploited yet. Second, it determines the cusp points in any two-dimensional slice of the joint space. First results show that the number of cusp points may vary from zero to eight. This work finds applications in both design and trajectory planning.

An Interval Analysis Based Study for the Design and the Comparison of 3-DOF Parallel Kinematic Machines

Abstract: This paper addresses an interval analysis based study that is applied to the design and the comparison of 3-DOF parallel kinematic machines. Two design criteria are used, (i) a regular workspace shape and, (ii) a kinetostatic performance index that needs to be as homogeneous as possible throughout the workspace. The interval analysis based method takes these two criteria into account: on the basis of prescribed kinetostatic performances, the workspace is analysed to find out the largest regular dextrous workspace enclosed in the Cartesian workspace. An algorithm describing this method is introduced. Two 3-DOF translational parallel mechanisms designed for machining applications are compared using this method. The first machine features three fixed linear joints which are mounted orthogonally and the second one features three linear joints which are mounted in parallel. In both cases, the mobile platform moves in the Cartesian x-y-z space with fixed orientation.

Virtual Manufacturing : Tools for improving Design and Production

Abstract: The research area "Virtual Manufacturing" can be defined as an integrated manufacturing environment which can enhance one or several levels of decision and control in manufacturing process. Several domains can be addressed: Product and Process Design, Process and Production Planning, Machine Tool, Robot and Manufacturing System. As automation technologies such as CAD/CAM have substantially shortened the time required to design products, Virtual Manufacturing will have a similar effect on the manufacturing phase thanks to the modelling, simulation and optimisation of the product and the processes involved in its fabrication.

Design of a Three-Axis Isotropic Parallel Manipulator for Machining Applications: The Orthoglide

Abstract: The orthoglide is a 3-DOF parallel mechanism designed at IRCCyN for machining applications. It features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The orthoglide has been designed as function of a prescribed Cartesian workspace with prescribed kinetostatic performances. The interesting features of the orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. A small-scale prototype of the orthoglide under development is presented at the end of this paper.

Moveability and Collision Analysis for Fully-Parallel Manipulators

Abstract: The aim of this paper is to characterize the moveability of fully-parallel manipulators in the presence of obstacles. Fully parallel manipulators are used in applications where accuracy, stiffness or high speeds and accelerations are required \cite{Merlet:97}. However, one of its main drawbacks is a relatively small workspace compared to the one of serial manipulators. This is due mainly to the existence of potential internal collisions, and the existence of singularities. In this paper, the notion of free aspect is defined which permits to exhibit domains of the workspace and the joint space free of singularity and collision. The main application of this study is the moveability analysis in the workspace of the manipulator as well as path-planning, control and design.

Design of a 3 Axis Parallel Machine Tool for High Speed Machining: The Orthoglide

Abstract: The Orthoglide project aims at designing a new 3-axis machine tool for High Speed Machining Basis kinematics is a 3 degree-of-freedom translational parallel mechanism This basis was submitted to isotropic and manipulability constraints that allowed the optmization of its kinematic architecture and legs architecture Thus, several leg morphologies are convenient for the chosen mechanism We explain the process that led us to the choice we made for the Orthoglide A static study is presented to show how singular configurations of the legs can cause stiffness problems

Experiments with small helicopter automated landings at unusual attitudes

Abstract: This paper describes a set of experiments involving small he- licopters landing automated landing at unusual attitudes. By leveraging the increased agility of small air vehicles, we show that it is possible to automat- ically land a small helicopter on surfaces pitched at angles up to 60 degrees. Such maneuvers require considerable agility from the vehicle and its avion- ics system, and they pose signicant technical and safety challenges. Our work builds upon previous activities in human-inspired, high-agility ight for small rotorcraft. However, it was not possible to leverage manual ight test data to extract landing maneuvers due to stringent attitude and posi- tion control requirements. Availability of low-cost, local navigation systems requiring no on-board instrumentation has proven particularly important for these experiments to be successful.

Classification of one family of 3R positioning Manipulators

Abstract: The aim of this paper is to classify one family of 3R serial positioning manipulators. This categorization is based on the number of cusp points of quaternary, binary, generic and non-generic manipulators. It was found three subsets of manipulators with 0, 2 or 4 cusp points and one homotopy class for generic quaternary manipulators. This classification allows us to define the design parameters for which the manipulator is cuspidal or not, i.e., for which the manipulator can or cannot change posture without meeting a singularity, respectively.

A Comparative Study between Two Three-DOF Parallel Kinematic Machines using Kinetostatic Criteria and Interval Analysis

Abstract: This paper addresses the workspace analysis of two 3-DOF translational parallel mechanisms designed for machining applications. The two machines features three fixed linear joints. The joint axes of the first machine are orthogonal whereas these of the second are parallel. In both cases, the mobile platform moves in the Cartesian $x-y-z$ space with fixed orientation. The workspace analysis is conducted on the basis of prescribed kinetostatic performances. Interval analysis based methods are used to compute the dextrous workspace and the largest cube enclosed in this workspace.

Working Modes and Aspects in Fully-Parallel Manipulator

Abstract: The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [Borrel 86], and redefined for parallel manipulators with only one inverse kinematic solution in [Wenger 1997], is redefined for general fully parallel manipulators. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the "inverse kinematics" and the "direct kinematics" matrices. The study of these matrices allow to respectively define the parallel and the serial singularities. The notion of working modes is introduced to separate inverse kinematic solutions. Thus, we can find out domains of the workspace and the joint space exempt of singularity. Application of this study is the moveability analysis in the workspace of the manipulator as well as path-planing and control. This study is illustrated in this paper with a RR-RRR planar parallel manipulator.

Virtual reality: A human centered tool for improving Manufacturing

Abstract: Manufacturing is using Virtual Reality tools to enhance the product life cycle. Their definitions are still in flux and it is necessary to define their connections. Thus, firstly, we will introduce more closely some definitions where we will find that, if the Virtual manufacturing concepts originate from machining operations and evolve in this manufacturing area, there exist a lot of applications in different fields such as casting, forging, sheet metalworking and robotics (mechanisms). From the recent projects in Europe or in USA, we notice that the human perception or the simulation of mannequin is more and more needed in both fields. In this context, we have isolated some applications as ergonomic studies, assembly and maintenance simulation, design or training where the virtual reality tools can be applied. Thus, we find out a family of applications where the virtual reality tools give the engineers the main role in the optimization process. We will illustrate our paper by several examples where virtual reality interfaces are used and combined with optimization tools as multi-agent systems.

Kinematic and stiffness analysis of the Orthoglide, a PKM with simple, regular workspace and homogeneous performances

Abstract: The Orthoglide is a Delta-type PKM dedicated to 3-axis rapid machining applications that was originally developed at IRCCyN in 2000-2001 to meet the advantages of both serial 3-axis machines (regular workspace and homogeneous performances) and parallel kinematic architectures (good dynamic performances and stiffness). This machine has three fixed parallel linear joints that are mounted orthogonally. The geometric parameters of the Orthoglide were defined as function of the size of a prescribed cubic Cartesian workspace that is free of singularities and internal collision. The interesting features of the Orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. In this paper, a new method is proposed to analyze the stiffness of overconstrained Delta-type manipulators, such as the Orthoglide. The Orthoglide is then benchmarked according to geometric, kinematic and stiffness criteria: workspace to footprint ratio, velocity and force transmission factors, sensitivity to geometric errors, torsional stiffness and translational stiffness.

Conception Isotropique D'Une Morphologie Parall\`Ele : Application \`a L'Usinage

Abstract: The aim of this paper is the isotropic design of a hybrid morphology dedicated to 3-axis machining applications. It is necessary to ensure the feasibility of continuous, singularity-free trajectories, as well as a good manipulability in position and velocity. We want to propose an alternative design to conventional serial machine-tools. We compare a serial PPP machine-tool (three prismatic orthogonal axes) with a hybrid architecture which we optimize only the first two axes. The critrerion used for the optimization is the conditioning of the Jacobian matrices. The optimum, namely isotropy, can be obtained which provides our architecture with excellent manipulability properties.

Uniqueness Domains in the Workspace of Parallel Manipulators

Abstract: This work investigates new kinematic features of parallel manipulators. It is well known that parallel manipulators admit generally several direct kinematic solutions for a given set of input joint values. The aim of this paper is to characterize the uniqueness domains in the workspace of parallel manipulators, as well as their image in the joint space. The study focuses on the most usual case of parallel manipulators with only one inverse kinematic solution. The notion of aspect introduced for serial manipulators in [Borrel 86] is redefined for such parallel manipulators. Then, it is shown that it is possible to link several solutions to the forward kinematic problem without meeting a singularity, thus meaning that the aspects are not uniqueness domains. An additional set of surfaces, namely the characteristic surfaces, are characterized which divide the workspace into basic regions and yield new uniqueness domains. This study is illustrated all along the paper with a 3-RPR planar parallel manipulator. An octree model of spaces is used to compute the joint space, the workspace and all other newly defined sets.

Control and Monitoring System for Modular Wireless Robot

Abstract: We introduce our concept on the modular wireless robot consisting of three main modules : main unit, data acquisition and data processing modules We have developed a generic prototype with an integrated control and monitoring system to enhance its flexibility, and to enable simple operation through a web-based interface accessible wirelessly In present paper, we focus on the microcontroller based hardware to enable data acquisition and remote mechanical control

Workspace Analysis of the Parallel Module of the VERNE Machine

Abstract: The paper addresses geometric aspects of a spatial three-degree-of-freedom parallel module, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel module consists of a moving platform that is connected to a fixed base by three non-identical legs. Each leg is made up of one prismatic and two pairs of spherical joint, which are connected in a way that the combined effects of the three legs lead to an over-constrained mechanism with complex motion. This motion is defined as a simultaneous combination of rotation and translation. A method for computing the complete workspace of the VERNE parallel module for various tool lengths is presented. An algorithm describing this method is also introduced.

A Novel method for the design of 2-DOF Parallel mechanisms for machining applications

Abstract: Parallel Kinematic Mechanisms (PKM) are interesting alternative designs for machine tools A design method based on velocity amplification factors analysis is presented in this paper The comparative study of two simple two-degree-of-freedom PKM dedicated to machining applications is led through this method: the common desired properties are the largest square Cartesian workspace for given kinetostatic performances The orientation and position of the Cartesian workspace are chosen to avoid singularities and to produce the best ratio between Cartesian workspace size and mechanism size The machine size of each resulting design is used as a comparative criterion

A New Three-DOF Parallel Mechanism: Milling Machine Applications

Abstract: This paper describes a new parallel kinematic architecture for machining applications, namely, the orthoglide. This machine features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The main interest of the orthoglide is that it takes benefit from the advantages of the popular PPP serial machines (regular Cartesian workspace shape and uniform performances) as well as from the parallel kinematic arrangement of the links (less inertia and better dynamic performances), which makes the orthoglide well suited to high-speed machining applications. Possible extension of the orthoglide to 5-axis machining is also investigated.

Regions of Feasible Point-to-Point Trajectories in the Cartesian Workspace of Fully-Parallel Manipulators

Abstract: The goal of this paper is to define the n-connected regions in the Cartesian workspace of fully-parallel manipulators, i.e. the maximal regions where it is possible to execute point-to-point motions. The manipulators considered in this study may have multiple direct and inverse kinematic solutions. The N-connected regions are characterized by projection, onto the Cartesian workspace, of the connected components of the reachable configuration space defined in the Cartesian product of the Cartesian space by the joint space. Generalized octree models are used for the construction of all spaces. This study is illustrated with a simple planar fully-parallel manipulator.

Kinematic Analysis of a New Parallel Machine Tool: the Orthoglide

Abstract: This paper describes a new parallel kinematic architecture for machining applications: the orthoglide. This machine features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The main interest of the orthoglide is that it takes benefit from the advantages of the popular PPP serial machines (regular Cartesian workspace shape and uniform performances) as well as from the parallel kinematic arrangement of the links (less inertia and better dynamic performances), which makes the orthoglide well suited to high-speed machining applications. Possible extension of the orthoglide to 5-axis machining is also investigated.

Singularity Surfaces and Maximal Singularity-Free Boxes in the Joint Space of Planar 3-RPR Parallel Manipulators

Abstract: In this paper, a method to compute joint space singularity surfaces of 3-RPR planar parallel manipulators is first presented. Then, a procedure to determine maximal joint space singularity-free boxes is introduced. Numerical examples are given in order to illustrate graphically the results. This study is of high interest for planning trajectories in the joint space of 3-RPR parallel manipulators and for manipulators design as it may constitute a tool for choosing appropriate joint limits and thus for sizing the link lengths of the manipulator.