Showing papers in "arXiv: Soft Condensed Matter in 2010"
TL;DR: In this article, a unified view of the many kinds of active matter is presented, encompassing not only living systems but inanimate analogues, and experiments are discussed side by side.
Abstract: Active particles contain internal degrees of freedom with the ability to take in and dissipate energy and, in the process, execute systematic movement. Examples include all living organisms and their motile constituents such as molecular motors. This article reviews recent progress in applying the principles of nonequilibrium statistical mechanics and hydrodynamics to form a systematic theory of the behaviour of collections of active particles -- active matter -- with only minimal regard to microscopic details. A unified view of the many kinds of active matter is presented, encompassing not only living systems but inanimate analogues. Theory and experiment are discussed side by side.
234 citations
TL;DR: In this paper, the phenomenological aspects and physical origin of shear-localization and shearbanding in various material types, namely emulsions, suspensions, colloids, granular materials and micellar systems, are reviewed and compared.
Abstract: We review and compare the phenomenological aspects and physical origin of shear-localization and shear-banding in various material types, namely emulsions, suspensions, colloids, granular materials and micellar systems. It appears that shear-banding, which must be distinguished from the simple effect of coexisting static-flowing regions in yield stress fluids, occurs in the form of a progressive evolution of the local viscosity towards two significantly different values in two adjoining regions of the fluids in which the stress takes slightly different values. This suggests that from a global point of view shear-banding in these systems has a common physical origin: two physical phenomena (for example, in colloids, destructuration due to flow and restructuration due to aging) are in competition and, depending on the flow conditions, one of them becomes dominant and makes the system evolve in a specific direction.
222 citations
TL;DR: In this article, the first moments of the probability distribution function for displacements as a function of time for a spherical particle with isotropic translational diffusion as well as for an anisotropic ellipsoidal particle are calculated.
Abstract: Overdamped Brownian motion of a self-propelled particle is studied by solving the Langevin equation analytically. On top of translational and rotational diffusion, in the context of the presented model, the "active" particle is driven along its internal orientation axis. We calculate the first four moments of the probability distribution function for displacements as a function of time for a spherical particle with isotropic translational diffusion as well as for an anisotropic ellipsoidal particle. In both cases the translational and rotational motion is either unconfined or confined to one or two dimensions. A significant non-Gaussian behavior at finite times t is signalled by a non-vanishing kurtosis. To delimit the super-diffusive regime, which occurs at intermediate times, two time scales are identified. For certain model situations a characteristic t^3 behavior of the mean square displacement is observed. Comparing the dynamics of real and artificial microswimmers like bacteria or catalytically driven Janus particles to our analytical expressions reveals whether their motion is Brownian or not.
166 citations
TL;DR: In this article, the behavior of suspensions of rigid particles in a non-Newtonian fluid is studied in the framework of a nonlinear homogenization method, and the overall properties of the composite material are obtained.
Abstract: The behavior of suspensions of rigid particles in a non-Newtonian fluid is studied in the framework of a nonlinear homogenization method. Estimates for the overall properties of the composite material are obtained. In the case of a Herschel-Bulkley suspending fluid, it is shown that the properties of a suspension with overall isotropy can be satisfactory modeled as that of a Herschel-Bulkley fluid with an exponent equal to that of the suspending fluid. Estimates for the yield stress and the consistency at large strain rate levels are proposed. These estimates compare well to both experimental data obtained by Mahaut et al [J. Rheol. 52, 287-313 (2008)] and to experimental data found in the literature.
165 citations
Posted Content•
TL;DR: Despite the successes of theory, it is concluded that much remains to be done to solve the protein folding problem in the broadest sense.
Abstract: Understanding how monomeric proteins fold under in vitro conditions is crucial to describing their functions in the cellular context. Significant advances both in theory and experiments have resulted in a conceptual framework for describing the folding mechanisms of globular proteins. The experimental data and theoretical methods have revealed the multifaceted character of proteins. Proteins exhibit universal features that can be determined using only the number of amino acid residues (N) and polymer concepts. The sizes of proteins in the denatured and folded states, cooperativity of the folding transition, dispersions in the melting temperatures at the residue level, and time scales of folding are to a large extent determined by N. The consequences of finite N especially on how individual residues order upon folding depends on the topology of the folded states. Such intricate details can be predicted using the Molecular Transfer Model that combines simulations with measured transfer free energies of protein building blocks from water to the desired concentration of the denaturant. By watching one molecule fold at a time, using single molecule methods, the validity of the theoretically anticipated heterogeneity in the folding routes, and the N-dependent time scales for the three stages in the approach to the native state have been established. Despite the successes of theory, of which only a few examples are documented here, we conclude that much remains to be done to solve the "protein folding problem" in the broadest sense.
162 citations
TL;DR: In this paper, two different cut-off implementations are compared, the standard shifted potential cutoff and the less commonly used shifted forces cutoff, and it is shown that for most purposes realistic simulations may be obtained using a shifted-forces cutoff at $r=1.5\sigma.
Abstract: Simulations involving the Lennard-Jones potential usually employ a cut-off at $r=2.5\sigma$. This paper investigates the possibility of reducing the cut-off. Two different cut-off implementations are compared, the standard shifted potential cut-off and the less commonly used shifted forces cut-off. The first has correct forces below the cut-off, whereas the shifted forces cut-off modifies Newton's equations at all distances. The latter is nevertheless superior; we find that for most purposes realistic simulations may be obtained using a shifted-forces cut-off at $r=1.5\sigma$, even though the pair force is here 30 times larger than at $r=2.5\sigma$.
153 citations
TL;DR: In this article, a carbopol microgel fluid was studied and the authors showed that the total duration of the fluidization process scales as τ √ √ f √ 1/(σ − ϵ - ϵ c) √ β √ ϵ − β, where β is an exponent which only depends on the microgel properties and not on the gap width or on the boundary conditions.
Abstract: Stress-induced fluidization of a simple yield stress fluid, namely a carbopol microgel, is addressed through extensive rheological measurements coupled to simultaneous temporally and spatially resolved velocimetry. These combined measurements allow us to rule out any bulk fracture-like scenario during the fluidization process such as that suggested in [Caton {\it et al., Rheol Acta}, 2008, {\bf 47}, 601-607]. On the contrary, we observe that the transient regime from solidlike to liquidlike behaviour under a constant shear stress $\sigma$ successively involves creep deformation, total wall slip, and shear banding before a homogeneous steady state is reached. Interestingly, the total duration $\tau_f$ of this fluidization process scales as $\tau_f \propto 1/(\sigma - \sigma_c)^{\beta}$, where $\sigma_c$ stands for the yield stress of the microgel, and $\beta$ is an exponent which only depends on the microgel properties and not on the gap width or on the boundary conditions. Together with recent experiments under imposed shear rate [Divoux {\it et al., Phys. Rev. Lett.}, 2010, {\bf 104}, 208301], this scaling law suggests a route to rationalize the phenomenological Herschel-Bulkley (HB) power-law classically used to describe the steady-state rheology of simple yield stress fluids. In particular, we show that the {\it steady-state} HB exponent appears as the ratio of the two fluidization exponents extracted separately from the {\it transient} fluidization processes respectively under controlled shear rate and under controlled shear stress.
126 citations
TL;DR: In this paper, the authors study the dependence of the shape of the droplets on the surface tensions and ratio of volumes and propose diagrams representing the equilibrium morphologies of two immiscible liquid droplets brought into contact.
Abstract: We propose diagrams representing the equilibrium morphologies of two immiscible liquid droplets brought into contact. We study the dependence of the shape of the droplets on the surface tensions and ratio of volumes. We study theoretically and experimentally the regimes of the parameters corresponding to complete engulfing (one of the droplets completely absorbed by the other one), non-engulfing (in which the droplets remain separated) and partial-engulfing (intermediate configuration in which all three interfaces are present). We specify the values of surface tensions corresponding to a Janus droplet, i.e., a perfectly spherical droplet composed of two sub-volumes occupied by two different phases and separated by a curved interface. We further calculate and experimentally verify a morphological transition between the states with positive and negative curvature of this interface depending on the ratio of volumes and on the equilibrium contact angle.
122 citations
TL;DR: In this paper, a tensor-valued Minkowski function is proposed for the analysis of complex spatial structure using a triangulation of the bounding surface of a 3D shape.
Abstract: This article describes the theoretical foundation of and explicit algorithms for a novel approach to morphology and anisotropy analysis of complex spatial structure using tensor-valued Minkowski functionals, the so-called Minkowski tensors. Minkowski tensors are generalisations of the well-known scalar Minkowski functionals and are explicitly sensitive to anisotropic aspects of morphology, relevant for example for elastic moduli or permeability of microstructured materials. Here we derive explicit linear-time algorithms to compute these tensorial measures for three-dimensional shapes. These apply to representations of any object that can be represented by a triangulation of its bounding surface; their application is illustrated for the polyhedral Voronoi cellular complexes of jammed sphere configurations, and for triangulations of a biopolymer fibre network obtained by confocal microscopy. The article further bridges the substantial notational and conceptual gap between the different but equivalent approaches to scalar or tensorial Minkowski functionals in mathematics and in physics, hence making the mathematical measure theoretic method more readily accessible for future application in the physical sciences.
112 citations
TL;DR: The surface free energy γ(R) of both spherical and cylindrical droplets and bubbles in the vapor-liquid case is extracted and evidence that for R→∞ the leading order (Tolman) correction for droplets has sign opposite to the case of bubbles, consistent with the Tolman length being independent on the sign of curvature.
Abstract: We study the excess free energy due to phase coexistence of fluids by Monte Carlo simulations using successive umbrella sampling in finite LxLxL boxes with periodic boundary conditions. Both the vapor-liquid phase coexistence of a simple Lennard-Jones fluid and the coexistence between A-rich and B-rich phases of a symmetric binary (AB) Lennard-Jones mixture are studied, varying the density rho in the simple fluid or the relative concentration x_A of A in the binary mixture, respectively. The character of phase coexistence changes from a spherical droplet (or bubble) of the minority phase (near the coexistence curve) to a cylindrical droplet (or bubble) and finally (in the center of the miscibility gap) to a slab-like configuration of two parallel flat interfaces. Extending the analysis of M. Schrader, P. Virnau, and K. Binder [Phys. Rev. E 79, 061104 (2009)], we extract the surface free energy gamma (R) of both spherical and cylindrical droplets and bubbles in the vapor-liquid case, and present evidence that for R -> Infinity the leading order (Tolman) correction for droplets has sign opposite to the case of bubbles, consistent with the Tolman length being independent on the sign of curvature. For the symmetric binary mixture the expected non-existence of the Tolman length is confirmed. In all cases {and for a range of radii} R relevant for nucleation theory, gamma(R) deviates strongly from gamma (Infinity) which can be accounted for by a term of order gamma(Infinity)/gamma(R)-1 ~ 1/R^2. Our results for the simple Lennard-Jones fluid are also compared to results from density functional theory and we find qualitative agreement in the behavior of gamma(R) as well as in the sign and magnitude of the Tolman length.
110 citations
TL;DR: A mean-field model is presented to account for the heterogeneity of the dielectric constant caused by the ions and suggests that the effect of ions on the local dielectrics constant should be taken into account when interpreting experiments that address ion-specific effects.
Abstract: Many theoretical studies were devoted in the past to ion-specific effects, trying to interpret a large body of experimental evidence, such as surface tension at air/water interfaces and force measurements between charged objects. Although several mechanisms were suggested to explain the results, such as dispersion forces and specific surface-ion interactions, we would like to suggest another source of ion-specificity, originating from the local variations of the dielectric constant due to the presence of ions in the solution. We present a mean-field model to account for the heterogeneity of the dielectric constant caused by the ions. In particular, for ions that decrease the dielectric constant we find a depletion of ions from the vicinity of charged surfaces. For a two-plate system, the same effect leads to an increase of the pressure in between two surfaces. Our results suggest that the effect of ions on the local dielectric constant should be taken into account when interpreting experiments that address ion-specific effects.
Posted Content•
TL;DR: Tunable nanopores fabricated in elastomeric membranes have been used to study the dependence of ionic current blockade rate on the concentration and electrophoretic mobility of particles in aqueous suspensions, finding blockade rates for carboxylic acid and amine coated 500 and 200 nm silica particles were found to correspond to changes in their mobility as a function of the solution pH.
Abstract: Tunable nanopores in elastomeric membranes have been used to study the dependence of ionic current blockade rate on the concentration and electrophoretic mobility of particles in aqueous suspensions. A range of nanoparticle sizes, materials and surface functionalities has been tested. Using pressure-driven flow through a pore, the blockade rate for 100 nm carboxylated polystyrene particles was found to be linearly proportional to both transmembrane pressure (controlled between 0 and 1.8 kPa) and particle concentration (between 7 x 10^8 and 4.5 x 10^10 mL^-1). This result can be accurately modelled using Nernst-Planck transport theory. Using only an applied potential across a pore, the blockade rates for carboxylic acid and amine coated 500 nm and 200 nm silica particles were found to correspond to changes in their mobility as a function of the solution pH. Scanning electron microscopy and confocal microscopy have been used to visualise changes in the tunable nanopore geometry in three dimensions as a function of applied mechanical strain. The pores observed were conical in shape, and changes in pore size were consistent with ionic current measurements. A zone of inelastic deformation adjacent to the pore has been identified as critical in the tuning process.
TL;DR: The energy cost associated with the insertion of a carbon nanotube into a model phospholipid bilayer is calculated using the single-chain mean field theory, which is particularly suitable for the accurate measurements of equilibrium free energies.
Abstract: Great efficiency to penetrate into living cells is attributed to carbon nanotubes due to a number of direct and indirect observations of carbon nanotubes inside the cells. However, a direct evidence of physical translocation of nanotubes through phospholipid bilayers and the exact microscopic mechanism of their penetration into cells are still lacking. In order to test one of the inferred translocation mechanisms, namely the spontaneous piercing through the membrane induced only by thermal motion, we calculate the energy cost associated with the insertion of a carbon nanotube into a model phospholipid bilayer using the Single Chain Mean Field theory which is particularly suitable for the accurate measurements of equilibrium free energies. We find that the energy cost of the bilayer rupture is quite high compared to the energy of thermal motion. This conclusion may indirectly support other energy dependent translocation mechanisms such as, for example, endocytosis.
Posted Content•
[...]
TL;DR: Some of the principles which underlie the modelin g of active matter, including large fluctuations violating expectations from the central limit theorem and substantial robustness against the disordering effects of thermal fluct uations, are described.
Abstract: The term active matter describes diverse systems, spanning macroscopic (eg shoals of fish and flocks of birds) to microscopic scales (eg migrating cells, motile bacteria and gels formed through the interaction of nanoscale molecular motors with cytoskeletal filaments within cells) Such systems are often idealizable in terms of collections of individual units, referred to as active particles or self-propelled particles, which take energy from an internal replenishable energy depot or ambient medium and transduce it into useful work performed on the environment, in addition to dissipating a fraction of this energy into heat These individual units may interact both directly as well as through disturbances propagated via the medium in which they are immersed Active particles can exhibit remarkable collective behaviour as a consequence of these interactions, including non-equilibrium phase transitions between novel dynamical phases, large fluctuations violating expectations from the central limit theorem and substantial robustness against the disordering effects of thermal fluctuations In this chapter, following a brief summary of experimental systems which may be classified as examples of active matter, I describe some of the principles which underlie the modeling of such systems
Posted Content•
TL;DR: In this paper, the authors used molecular dynamics simulations on a single nanoparticle of radius R ($4\sigma \le$R$\le 16 \sigma), where σ is the diameter of a polymer monomer, and they found that the number of entanglements between the brush and matrix chains scale with the product of the local monomer densities of brush and melt chains.
Abstract: It has recently been proposed that the miscibility of nanoparticles with a polymer matrix can be controlled by grafting polymer chains to the nanoparticle surface. As a first step to study this situation, we have used molecular dynamics simulations on a single nanoparticle of radius R ($4\sigma \le$R$\le 16\sigma$, where $\sigma$ is the diameter of a polymer monomer) grafted with chains of length 500 in a polymer melt of chains of length 1000. The grafting density $\Sigma$ was varied between $0.04$-$0.32$ chains/$\sigma^2$. To facilitate equilibration a Monte Carlo double-bridging algorithm is applied - new bonds are formed across a pair of chains, creating two new chains each substantially different from the original. For the long brush chains studied here, the structure of the brush assumes its large particle limit even for $R$ as small as 8$\sigma$, which is consistent with recent experimental findings. We study autophobic dewetting of the melt from the brush as a function of increasing $\Sigma$. Even these long brush and matrix chains of length $6$ and $12$ $N_e$, respectively, (the entanglement length is $N_e \sim 85$) give somewhat ambiguous results for the interfacial width, showing that studies of two or more nanoparticles are necessary to properly understand these miscibility issues. Entanglement between the brush and melt chains were identified using the primitive path analysis. We find that the number of entanglements between the brush and melt chains scale simply with the product of the local monomer densities of brush and melt chains.
TL;DR: A new experimental approach to study the structural transitions of large numbers of nanoparticle-coated droplets as their volume is reduced, by adding a fixed amount of unsaturated continuous phase, causing them to buckle or crumple, thereby becoming nonspherical.
Abstract: We introduce a new experimental approach to study the structural transitions of large numbers of nanoparticle-coated droplets as their volume is reduced. We use an emulsion system where the dispersed phase is slightly soluble in the continuous phase. By adding a fixed amount of unsaturated continuous phase, the volume of the droplets can be controllably reduced, causing them to buckle or crumple, thereby becoming nonspherical. The resultant morphologies depend both on the extent of volume reduction and the average droplet size. The buckling and crumpling behavior implies that the droplet surfaces are solid.
TL;DR: A coarse grained model for flexible polymers end-grafted to repulsive spherical nanoparticles is studied for various chain lengths and grafting densities under good solvent conditions by molecular dynamics methods and density functional theory.
Abstract: A coarse grained model for flexible polymers end-grafted to repulsive spherical nanoparticles is studied for various chain lengths and grafting densities under good solvent conditions, by Molecular Dynamics methods and density functional theory. With increasing chain length the monomer density profile exhibits a crossover to the star polymer limit. The distribution of polymer ends and the linear dimensions of individual polymer chains are obtained, while the inhomogeneous stretching of the chains is characterized by the local persistence lengths. The results on the structure factor of both single chain and full spherical brush as well as the range of applicability of the different theoretical tools are presented. Eventually an outlook on experiments is given.
Posted Content•
TL;DR: In this article, an organic microenvironment is formed around dispersed graphene sheets in surfactant solutions, and a nylon 6,10 or nylon 6 6,6 coating is created via interfacial polymerization.
Abstract: We demonstrate a novel in situ polymerization technique to develop localized polymer coatings on the surface of dispersed pristine graphene sheets. Graphene sheets show great promise as strong, conductive fillers in polymer nanocomposites; however, difficulties in dispersion quality and interfacial strength between filler and matrix have been a persistent problem for graphene-based nanocomposites, particularly for pristine graphene. To address this problem, a physisorbed polymer layer is used to stabilize graphene sheets in solution. To form this protective layer, an organic microenvironment is formed around dispersed graphene sheets in surfactant solutions, and a nylon 6,10 or nylon 6,6 coating is created via interfacial polymerization. A similar technique was originally developed to protect luminescent properties of carbon nanotubes in solution. These coated graphene dispersions are aggregation-resistant and may be reversibly redispersed in water even after freeze-drying. The coated graphene holds promise for a number of applications, including multifunctional graphene-polymer nanocomposites.
TL;DR: A significant improvement to 3D cross-correlation is presented in which the two scattering experiments are temporally separated by modulating the incident laser beams and gating the detector outputs at frequencies exceeding the timescale of the system dynamics.
Abstract: Accurate characterization using static light scattering (SLS) and dynamic light scattering (DLS) methods mandates the measurement and analysis of singly-scattered light. In turbid samples, the suppression of multiple scattering is therefore required to obtain meaningful results. One powerful technique for achieving this, known as 3D cross-correlation, uses two simultaneous light scattering experiments performed at the same scattering vector on the same sample volume in order to extract only the single scattering information common to both. Here we present a significant improvement to this method in which the two scattering experiments are temporally separated by modulating the incident laser beams and gating the detector outputs at frequencies exceeding the timescale of the system dynamics. This robust modulation scheme eliminates cross-talk between the two beam- detector pairs and leads to a four-fold improvement in the cross-correlation intercept. We measure the dynamic and angular-dependent scattering intensity of turbid colloidal suspensions and exploit the improved signal quality of the modulated 3D cross-correlation DLS and SLS techniques.
TL;DR: Superpositioning of relaxation data as a function of the product variable TV(γ), where T is temperature, V the specific volume, and γ a material constant, is an experimental fact demonstrated, suggesting that an IPL is a good approximation for certain relaxation properties over the relevant range of intermolecular distances.
Abstract: Superpositioning of relaxation data as a function of the product variable TV^{\gamma}, where T is temperature, V the specific volume, and {\gamma} a material constant, is an experimental fact demonstrated for approximately 100 liquids and polymers. Such scaling behavior would result from the intermolecular potential having the form of an inverse power law (IPL), suggesting that an IPL is a good approximation for certain relaxation properties over the relevant range of intermolecular distances. However, the derivation of the scaling property of an IPL liquid is based on reduced quantities, for example, the reduced relaxation time equal to T^1/2V^-1/3 times the actual relaxation time. The difference between scaling using reduced rather than unreduced units is negligible in the supercooled regime; however, at higher temperature the difference can be substantial, accounting for the purported breakdown of the scaling and giving rise to different values of the scaling exponent. Only the {\gamma} obtained using reduced quantities can be sensibly related to the intermolecular potential.
TL;DR: In this paper, a generic model of glassy dynamics is proposed to explain the formation of ultra-stable glass films, the associated enhancement of relaxation rates by a factor of 10^5, the observation of front-like response to temperature jumps and the temperature dependence of the front velocity.
Abstract: The recent experimental fabrication of ultra stable glass films via vapour deposition [Science 315, 353 (2007)] and the observation of front-like response to the annealing of these films [Phys.Rev.Lett. 102, 065503 (2009)], have raised important questions about the possibility of manipulating the properties of glass films and addressing fundamental questions about kinetics and thermodynamics of amorphous materials. Central to both of these issues is the need to establish the essential physics that governs the formation of the ultra-stable films and their subsequent response. In this paper we demonstrate that a generic model of glassy dynamics can account for the formation of ultra-stable films, the associated enhancement of relaxation rates by a factor of 10^5, the observation of front-like response to temperature jumps and the temperature dependence of the front velocity
TL;DR: In this article, the authors reported the first direct measurement of the conformation of a polymer corona grafted around silica nano-particles dispersed inside a nanocomposite, a matrix of the same polymer.
Abstract: The present communication reports the first direct measurement of the conformation of a polymer corona grafted around silica nano-particles dispersed inside a nanocomposite, a matrix of the same polymer. This measurement constitutes an experimental breakthrough based on a refined combination of chemical synthesis, which permits to match the contribution of the neutron silica signal inside the composite, and the use of complementary scattering methods SANS and SAXS to extract the grafted polymer layer form factor from the inter-particles silica structure factor. The modelization of the signal of the grafted polymer on nanoparticles inside the matrix and the direct comparison with the form factor of the same particles in solution show a clear-cut change of the polymer conformation from bulk to the nanocomposite: a transition from a stretched and swollen form in solution to a Gaussian conformation in the matrix followed with a compression of a factor two of the grafted corona. In the probed range, increasing the interactions between the grafted particles (by increasing the particle volume fraction) or between the grafted and the free matrix chains (decreasing the grafted-free chain length ratio) does not influence the amplitude of the grafted brush compression. This is the first direct observation of the wet-to-dry conformational transition theoretically expected to minimize the free energy of swelling of grafted chains in interaction with free matrix chains, illustrating the competition between the mixing entropy of grafted and free chains, and the elastic deformation of the grafted chains. In addition to the experimental validation of the theoretical prediction, this result constitutes a new insight for the nderstanding of the general problem of dispersion of nanoparticles inside a polymer matrix for the design of new nanocomposites materials.
TL;DR: In this paper, the applicability of the Kratky-porod model for self-avoiding walks of up to $N_b=50000$ steps and variable flexibility was tested.
Abstract: When the local intrinsic stiffness of a polymer chain varies over a wide range, one can observe both a crossover from rigid-rod-like behavior to (almost) Gaussian random coils and a further crossover towards self-avoiding walks in good solvents. Using the pruned-enriched Rosenbluth method (PERM) to study self-avoiding walks of up to $N_b=50000$ steps and variable flexibility, the applicability of the Kratky-Porod model is tested. Evidence for non-exponential decay of the bond-orientational correlations $ $ for large distances $s$ along the chain contour is presented, irrespective of chain stiffness. For bottle-brush polymers on the other hand, where experimentally stiffness is varied via the length of side-chains, it is shown that these cylindrical brushes (with flexible backbones) are not described by the Kratky-Porod wormlike chain model, since their persistence length is (roughly) proportional to their cross-sectional radius, for all conditions of practical interest.
TL;DR: In this paper, the authors present a comprehensive investigation of polymer diffusion in the semidilute regime by fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS).
Abstract: We present a comprehensive investigation of polymer diffusion in the semidilute regime by fluorescence correlation spectroscopy (FCS) and dynamic light scattering (DLS). Using single-labeled polystyrene chains, FCS leads to the self-diffusion coefficient while DLS gives the cooperative diffusion coefficient for exactly the same molecular weights and concentrations. Using FCS we observe a new fast mode in the semidilute entangled concentration regime beyond the slower mode which is due to self-diffusion. Comparison of FCS data with data obtained by DLS on the same polymers shows that the second mode observed in FCS is identical to the cooperative diffusion coefficient measured with DLS. An in-depth analysis and a comparison with current theoretical models demonstrates that the new cooperative mode observed in FCS is due to the effective long-range interaction of the chains through the transient entanglement network.
TL;DR: A new multiple-relaxation-time lattice Boltzmann scheme for compressible flows with arbitrary specific-heat ratio and Prandtl number is presented, based on a two-dimensional 16-discrete-velocity model.
Abstract: A new multiple-relaxation-time lattice Boltzmann scheme for compressible flows with arbitrary specific heat ratio and Prandtl number is presented. In the new scheme, which is based on a two-dimensional 16-discrete-velocity model, the moment space and the corresponding transformation matrix are constructed according to the seven-moment relations associated with the local equilibrium distribution function. In the continuum limit, the model recovers the compressible Navier-Stokes equations with flexible specific-heat ratio and Prandtl number. Numerical experiments show that compressible flows with strong shocks can be simulated by the present model up to Mach numbers $Ma \sim 5$.
Posted Content•
TL;DR: In this article, the structural and mechanical properties of static packings composed of frictionless convex (ellipses) and concave (rigid dimers) particles in two dimensions were compared.
Abstract: We compare the structural and mechanical properties of static packings composed of frictionless convex (ellipses) and concave (rigid dimers) particles in two dimensions. We employ numerical simulations to generate static packings and measure the shear stress in response to applied simple shear strain as a function of the aspect ratio and amount of compression. We find that the behavior near jamming is significantly different for ellipses and dimers even though both shapes are roughly characterized by the aspect ratio and possess the same number of translational and rotational degrees of freedom per particle. For example, we find that ellipse packings are hypostatic (not isostatic as found for dimers), display novel power-law scaling of the static linear shear modulus and contact number with the amount of compression, and possess stress-strain relations that are qualitatively different from that for dimers. Thus, we observe that important macroscopic properties of static packings of anisotropic particles can depend on the microscale geometrical features of individual particles.
TL;DR: The density range of the excess entropy anomaly is shown to be much narrower in water than in ionic melts or the 2SRP fluid, and Isochores with similar diffusivity-scaling parameters are shown to have the temperature dependence of the corresponding entropic contribution.
Abstract: Anomalous behaviour of the excess entropy ($S_e$) and the associated scaling relationship with diffusivity are compared in liquids with very different underlying interactions but similar water-like anomalies: water (SPC/E and TIP3P models), tetrahedral ionic melts (SiO$_2$ and BeF$_2$) and a fluid with core-softened, two-scale ramp (2SRP) interactions. We demonstrate the presence of an excess entropy anomaly in the two water models. Using length and energy scales appropriate for onset of anomalous behaviour, the density range of the excess entropy anomaly is shown to be much narrower in water than in ionic melts or the 2SRP fluid. While the reduced diffusivities ($D^*$) conform to the excess entropy scaling relation, $D^* =A\exp (\alpha S_e)$ for all the systems (Y. Rosenfeld, Phys. Rev. A {\bf 1977}, {\it 15}, 2545), the exponential scaling parameter, $\alpha$, shows a small isochore-dependence in the case of water. Replacing $S_e$ by pair correlation-based approximants accentuates the isochore-dependence of the diffusivity scaling. Isochores with similar diffusivity scaling parameters are shown to have the temperature dependence of the corresponding entropic contribution. The relationship between diffusivity, excess entropy and pair correlation approximants to the excess entropy are very similar in all the tetrahedral liquids.
Posted Content•
TL;DR: It is shown that in the liquid regime the behaviour of jammed systems turns from that of a simple yield stress fluid to a shear-banding material when the ratio of a characteristic relaxation time of the system to a restructuring time becomes smaller than 1, thus suggesting a possible physical origin of these trends.
Abstract: Jammed systems all have a yield stress. Among these materials some have been shown to shear-band but it is as yet unclear why some materials develop shear-band and some others do not. In order to rationalize existing data concerning the flow characteristics of jammed systems and in particular understand the physical origin of such a difference we propose a simple approach for describing the steady flow behaviour of yield stress fluids, which retains only basic physical ingredients. Within this frame we show that in the liquid regime the behaviour of jammed systems turns from that of a simple yield stress fluid (exhibiting homogeneous flows) to a shear-banding material when the ratio of a characteristic relaxation time of the system to a restructuring time becomes smaller than 1, thus suggesting a possible physical origin of these trends.
TL;DR: Linear stability analysis of the startup to a sufficiently high shear rate shows that spatial fluctuations are unstable at early times, and there is a strong correlation between this instability and the negative slope of the (time dependent) constitutive curve.
Abstract: Spatially inhomogeneous shear flow occurs in entangled polymer solutions, both as steady state shear banding and transiently after a large step strain or during start up to a steady uniform shear rate. Steady state shear banding is a hallmark of models with a non-monotonic constitutive relation between total shear stress and applied shear rate, but transient banding is sometimes seen in fluids that do not shear band at steady state. We model this behavior using the diffusive Rolie-Poly model in a Newtonian solvent, whose constitutive behavior can be monotonic or non-monotonic depending on the degree of convected constraint release (CCR). We study monotonic constitutive behaviour. Linear stability analysis of start up to a sufficiently high shear rate shows that spatial fluctuations are unstable at early times. There is a strong correlation between this instability and the negative slope of the (time dependent) constitutive curve. If the time integral of the most unstable eigenvalue is sufficiently large then the system exhibits transient shear bands that later vanish in steady state. We show how perturbations, due to fluctuations or the inhomogeneous stresses, can trigger this instability. This transient behavior is similar to recent observations in entangled polymer solutions
TL;DR: In this paper, the authors present a new convenient and efficient "grafting from" method to obtain well defined polystyrene (PS) silica nanoparticles, which is based on Nitroxide-Mediated Polymerization (NMP), consists to bind covalently the alkoxyamine, which acts as initiator controller agent.
Abstract: We present a new convenient and efficient "grafting from" method to obtain well defined polystyrene (PS) silica nanoparticles. The method, based on Nitroxide-Mediated Polymerization (NMP), consists to bind covalently the alkoxyamine, which acts as initiator controller agent, at the silica nanoparticles surface in two steps. The first step is a reaction between the aminopropylsilane and the silica particles in order to functionalize the particles surface with amino group. In a second step, the initiating-controlling alkoxyamine moiety is introduced via an over grafting reaction between the amino group and the N-hydroxysuccinimide based MAMA-SG1 activated ester. To simplify both their chemical transformation and the polymerization step, the native silica particles, initially dispersed in water, have been transferred in an organic solvent, the dimethylacetamide, which is also a good solvent for the polystyrene. The synthesis parameters have been optimized for grafting density, conversion rates, and synthesis reproducibility while keeping the colloidal stability and to avoid any aggregation of silica particles induced by the inter-particles interaction evolution during the synthesis. After synthesis, the final grafted objects have been purified and the non-grafted polymer chains formed in the solvent have been washed out by ultra filtration. Then the particles have been studied using Small angle Neutron Scattering (SANS) coupled to neutron contrast variation method. To optimize the contrast conditions, both hydrogenated and deuterated monomers have been used for the synthesis. A refined fitting analysis based on the comparison on two models, a basic core-shell and the Gaussian Pedersen model, enables us to fit nicely the experimental data for both the hydrogenated and deuterated grafted case. Differences are seen between grafting of normal or deuterated chains which can be due to monomer reactivity or to neutron contrast effect variations. The synthesis and the characterization method established in this work constitute a robust and reproducible way to design well defined grafted polymer nanoparticles. These objects will be incorporated in polymer matrices in a further step to create Nanocomposites for polymer reinforcement.