Showing papers in "arXiv: Soft Condensed Matter in 2011"
TL;DR: In this article, the authors review the phenomena associated with the colloidal glass transition, and in particular discuss observations of spatial and temporally heterogeneous dynamics within colloidal samples near the glass transition.
Abstract: Concentrated colloidal suspensions are a well-tested model system which has a glass transition. Colloids are suspensions of small solid particles in a liquid, and exhibit glassy behavior when the particle concentration is high; the particles are roughly analogous to individual molecules in a traditional glass. Because the particle size can be large (100 nm - 1000 nm), these samples can be studied with a variety of optical techniques including microscopy and dynamic light scattering. Here we review the phenomena associated with the colloidal glass transition, and in particular discuss observations of spatial and temporally heterogeneous dynamics within colloidal samples near the glass transition. Although this Chapter focuses primarily on results from hard-sphere-like colloidal particles, we also discuss other colloidal systems with attractive or soft repulsive interactions.
414 citations
Posted Content•
TL;DR: The results reveal that the particle–fluid–trap system can be considered a nanomechanical resonator in which the intrinsic hydrodynamic backflow enhances resonance, and shows that hydrod dynamic correlations result in a resonant peak in the power spectral density of the sphere’s positional fluctuations, in strong contrast to overdamped systems.
Abstract: . Essen-tially two counteracting forces govern the motion of the Brownian particle.First, the particle is driven by the rapid collisions with the surrounding sol-vent molecules, referred to as thermal noise. Second, the friction betweenthe particle and the viscous solvent damps its motion. Conventionally, thethermal force is assumed to be random and characterized by a white noise1
269 citations
TL;DR: The rings relax stress much faster than linear polymers, and the zero-shear viscosity was found to vary as η(0) ∼ N(1.4 ± 0.2) which is much weaker than the N(3.4) behavior of linear chains, not matching any commonly known model for polymer dynamics when compared to the observed mean-square displacements.
Abstract: Molecular dynamics simulations were conducted to investigate the dynamic properties of melts of nonconcatenated ring polymers and compared to melts of linear polymers. The longest rings were composed of N=1600 monomers per chain which corresponds to roughly 57 entanglement lengths for comparable linear polymers. The ring melts were found to diffuse faster than their linear counterparts, with the self-diffusion coefficient for both architectures scaling as approximately N to the -2.4 power for large N. The mean-square displacement of the center-of-mass of the rings follows a sub-diffusive behavior for times and distances beyond the mean-square gyration radius, neither compatible with the Rouse nor the reptation model. The rings relax stress much faster than linear polymers and the zero-shear viscosity was found to vary as approximately N to the 1.4 power which is much weaker than the N to the 3.4 power of linear chains, not matching any commonly known model for polymer dynamics when compared to the observed mean-square displacements. These findings are discussed in view of the conformational properties of the rings presented in the preceding paper (DOI: 10.1063/1.3587137).
217 citations
Posted Content•
TL;DR: In this paper, the authors reveal the mechanism by which thermal fluctuations drive the transition from the supercooled liquid state to the crystal state, and show that fluctuations in bond orientational order trigger the nucleation process.
Abstract: Despite its fundamental and technological importance, a microscopic understanding of the crystallization process is still elusive. By computer simulations of the hard-sphere model we reveal the mechanism by which thermal fluctuations drive the transition from the supercooled liquid state to the crystal state. In particular we show that fluctuations in bond orientational order trigger the nucleation process, contrary to the common belief that the transition is initiated by density fluctuations. Moreover, the analysis of bond orientational fluctuations shows that these not only act as seeds of the nucleation process, but also i) determine the particular polymorph which is to be nucleated from them and ii) at high density favour the formation of fivefold structures which can frustrate the formation of crystals. These results can shed new light on our understanding of the relationship between crystallization and vitrification.
169 citations
TL;DR: In this article, the authors studied the thermodynamic self-assembly of a family of truncated tetrahedra and reported several atomic crystal isostructures, including diamond, β-tin and high pressure lithium, as the polyhedron shape varies from tetrahedral to octahedral.
Abstract: Polyhedra and their arrangements have intrigued humankind since the ancient Greeks and are today important motifs in condensed matter, with application to many classes of liquids and solids. Yet, little is known about the thermodynamically stable phases of polyhedrally-shaped building blocks, such as faceted nanoparticles and colloids. Although hard particles are known to organize due to entropy alone, and some unusual phases are reported in the literature, the role of entropic forces in connection with polyhedral shape is not well understood. Here, we study thermodynamic self-assembly of a family of truncated tetrahedra and report several atomic crystal isostructures, including diamond, {\beta}-tin, and high- pressure lithium, as the polyhedron shape varies from tetrahedral to octahedral. We compare our findings with the densest packings of the truncated tetrahedron family obtained by numerical compression and report a new space filling polyhedron, which has been overlooked in previous searches. Interestingly, the self-assembled structures differ from the densest packings. We show that the self-assembled crystal structures can be understood as a tendency for polyhedra to maximize face-to-face alignment, which can be generalized as directional entropic forces.
160 citations
TL;DR: In this paper, the Seeebeck coefficient of tetraalkylammonium ion in 1-dodecanol was found to be 7 mV/K at 0.1M concentration.
Abstract: The Seeebeck coefficients of the non-aqueous electrolytes tetrabutylammonium nitrate, tetraoctylphosphonium bromide and tetradodecylammonium nitrate in 1-octanol, 1-dodecanol and ethylene-glycol are measured in a temperature range from T=30 to T=45 C. The Seebeck coefficient is generally of the order of a few hundreds of microvolts per Kelvin for aqueous solution of inorganic ions. Here we report huge values of 7 mV/K at 0.1M concentration for tetrabutylammonium nitrate in 1-dodecanol. These striking results open the question of unexpectedly large kosmotrope or "structure making" effects of tetraalkylammonium ions on the structure of alcohols.
142 citations
TL;DR: In this article, a mean-field-based approach was used to predict ion-specific effects on the forces acting within and between charged interfaces immersed in salt solutions, and the results showed that ion-hydration interactions can be accounted for theoretically on a mean field level by including phenomenological terms in the free energy that correspond to the most dominant ionspecific interactions, leading to modified Poisson-Boltzmann equations with appropriate boundary conditions.
Abstract: In aqueous solutions, dissolved ions interact strongly with the surrounding water, thereby modifying the solution properties in an ion-specific manner. These ion-hydration interactions can be accounted for theoretically on a mean-field level by including phenomenological terms in the free energy that correspond to the most dominant ion-specific interactions. Minimizing this free energy leads to modified Poisson-Boltzmann equations with appropriate boundary conditions. Here, we review how this strategy has been used to predict some of the ways ion-specific effects can modify the forces acting within and between charged interfaces immersed in salt solutions.
132 citations
TL;DR: In this paper, a micromechanical study of unsaturated granular media in the pendular regime, based upon numerical experiments using the discrete element method, compared to a microstructural elastoplastic model, is presented.
Abstract: This paper presents a micromechanical study of unsaturated granular media in the pendular regime, based upon numerical experiments using the discrete element method, compared to a microstructural elastoplastic model. Water effects are taken into account by adding capillary menisci at contacts and their consequences in terms of force and water volume are studied. Simulations of triaxial compression tests are used to investigate both macro and micro-effects of a partial saturation. The results provided by the two methods appear to be in good agreement, reproducing the major trends of a partially saturated granular assembly, such as the increase in the shear strength and the hardening with suction. Moreover, a capillary stress tensor is exhibited from capillary forces by using homogenisation techniques. Both macroscopic and microscopic considerations emphasize an induced anisotropy of the capillary stress tensor in relation with the pore fluid distribution inside the material. In so far as the tensorial nature of this fluid fabric implies shear effects on the solid phase associated with suction, a comparison has been made with the standard equivalent pore pressure assumption. It is shown that water effects induce microstrural phenomena that cannot be considered at the macro level, particularly when dealing with material history. Thus, the study points out that unsaturated soil stress definitions should include, besides the macroscopic stresses such as the total stress, the microscopic interparticle stresses such as the ones resulting from capillary forces, in order to interpret more precisely the implications of the pore fluid on the mechanical behaviour of granular materials.
124 citations
TL;DR: In this article, a simple liquid is defined by the property of having strong correlation between virial and potential energy equilibrium fluctuations in the NVT ensemble, which is not a property of the intermolecular potential only because a liquid is usually only strongly correlating in part of its phase diagram.
Abstract: Simple liquids are traditionally defined as many-body systems of classical particles interacting via radially symmetric pair potentials. We suggest that a simple liquid should be defined instead by the property of having strong correlation between virial and potential energy equilibrium fluctuations in the NVT ensemble. There is considerable overlap between the two definitions, but also some notable differences. For instance, in the new definition simplicity is not a property of the intermolecular potential only because a liquid is usually only strongly correlating in part of its phase diagram. Moreover, according to the new definition not all simple liquids are atomic (i.e., with radially symmetric pair potentials) and not all atomic liquids are simple. The main part of the paper motivates the new definition of liquid simplicity by presenting evidence that a liquid is strongly correlating if and only if its intermolecular interactions may be ignored beyond the first coordination shell (FCS). This is demonstrated by NVT simulations of structure and dynamics of 15 atomic and molecular model liquids with a shifted-forces cutoff placed at the first minimum of the radial distribution function. No proof is given that the chemical characterization follows from the strong correlation property, but it is shown to be consistent with the existence of isomorphs in strongly correlating liquids' phase diagram. Finally, we note that the FCS characterization of simple liquids calls into question the basis for standard perturbation theory, according to which the repulsive and attractive forces play fundamentally different roles for the physics of liquids.
123 citations
TL;DR: In this paper, it was shown that power-law density scaling breaks down for larger density variations than usually studied, and a more general form of density scaling is derived, which is consistent with results for all the systems studied.
Abstract: Supercooled liquids are characterized by relaxation times that increase dramatically by cooling or compression. Many liquids have been shown to obey power-law density scaling, according to which the relaxation time is a function of density to some power over temperature. We show that power-law density scaling breaks down for larger density variations than usually studied. This is demonstrated by simulations of the Kob-Andersen binary Lennard-Jones mixture and two molecular models, as well as by experimental results for two van der Waals liquids. A more general form of density scaling is derived, which is consistent with results for all the systems studied. An analytical expression for the scaling function for liquids of particles interacting via generalized Lennard-Jones potentials is derived and shown to agree very well with simulations. This effectively reduces the problem of understanding the viscous slowing down from being a quest for a function of two variables to a search for a single-variable function.
122 citations
TL;DR: In this paper, the authors provide broadband dielectric spectra showing strong electrode polarization effects for various materials, belonging to very different material classes, including both ionic and electronic conductors.
Abstract: In the present work, we provide broadband dielectric spectra showing strong electrode polarization effects for various materials, belonging to very different material classes. This includes both ionic and electronic conductors as, e.g., salt solutions, ionic liquids, human blood, and colossal-dielectric-constant materials. These data are intended to provide a broad data base enabling a critical test of the validity of phenomenological and microscopic models for electrode polarization. In the present work, the results are analyzed using a simple phenomenological equivalent-circuit description, involving a distributed parallel RC circuit element for the modeling of the weakly conducting regions close to the electrodes. Excellent fits of the experimental data are achieved in this way, demonstrating the universal applicability of this approach. In the investigated ionically conducting materials, we find the universal appearance of a second dispersion region due to electrode polarization, which is only revealed if measuring down to sufficiently low frequencies. This indicates the presence of a second charge-transport process in ionic conductors with blocking electrodes.
Posted Content•
TL;DR: In this article, the underlying potential energy surface of liquid molecules at all temperatures was analyzed and shown to be spatially inhomogeneous either LDL- or HDL-like with a 3:1 predominance for HDL at ambient conditions.
Abstract: In the supercooled regime at elevated pressure two forms of liquid water, high-density (HDL) and low-density (LDL), have been proposed to be separated by a coexistence line ending at a critical point, but a connection to ambient conditions has been lacking. Here we perform large-scale molecular dynamics simulations and demonstrate that the underlying potential energy surface gives a strictly bimodal characterization of the molecules at all temperatures as spatially inhomogeneous either LDL- or HDL-like with a 3:1 predominance for HDL at ambient conditions. The Widom line, indicating maximum fluctuations, coincides with a 1:1 distribution. Our results indicate a unified description of liquid water covering supercooled to ambient conditions in agreement with recent x-ray spectroscopy and scattering data.
TL;DR: The implementation of INDUS in the NPT ensemble is described, the method may be of particular interest in characterizing the hydrophobicity of interfaces of proteins, nanotubes and related systems, and its distributions over a broad range of pressures are calculated.
Abstract: Water density fluctuations are an important statistical mechanical observable that is related to many-body correlations, as well as hydrophobic hydration and interactions. Local water density fluctuations at a solid-water surface have also been proposed as a measure of its hydrophobicity. These fluctuations can be quantified by calculating the probability, $P_v(N)$, of observing $N$ waters in a probe volume of interest $v$. When $v$ is large, calculating $P_v(N)$ using molecular dynamics simulations is challenging, as the probability of observing very few waters is exponentially small, and the standard procedure for overcoming this problem (umbrella sampling in $N$) leads to undesirable impulsive forces. Patel et al. [J. Phys. Chem. B, 114, 1632 (2010)] have recently developed an indirect umbrella sampling (INDUS) method, that samples a coarse-grained particle number to obtain $P_v(N)$ in cuboidal volumes. Here, we present and demonstrate an extension of that approach to other basic shapes, like spheres and cylinders, as well as to collections of such volumes. We further describe the implementation of INDUS in the NPT ensemble and calculate $P_v(N)$ distributions over a broad range of pressures. Our method may be of particular interest in characterizing the hydrophobicity of interfaces of proteins, nanotubes and related systems.
TL;DR: This article discusses the way the standard description of capillary filling dynamics has to be modified to account for liquid/solid slip in nanometric pores, and focuses, in particular, on the case of a large slip length compared to the pore size.
Abstract: This article discusses the way the standard description of capillary filling dynamics has to be modified to account for liquid/solid slip in nanometric pores. It focuses in particular on the case of a large slip length compared to the pore size. It is shown that the liquid viscosity does not play a role, and that the flow is only controlled by the friction coefficient of the liquid at the wall. Moreover in the Washburn regime, the filling velocity does not depend on the tube radius. Finally, molecular dynamics simulations suggest that this standard description fails to describe the early stage of capillary filling of carbon nanotubes by water, since viscous dissipation at the tube entrance must be taken into account.
TL;DR: In this article, a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel is presented, and good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model.
Abstract: We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a simple theoretical analysis, based on the dimensionless criterion proposed by Pakdel-McKinley for onset of a purely-elastic instability.
TL;DR: In this paper, a coarse-grained model of DNA double-helical duplexes is introduced and investigated via numerical simulations, where each duplex is represented as an hard quasi-cylinder whose bases are decorated with two identical reactive sites.
Abstract: Concentrated solutions of short blunt-ended DNA duplexes, down to 6 base pairs, are known to order into the nematic liquid crystal phase. This self-assembly is due to the stacking interactions between the duplex terminals that promotes their aggregation into poly-disperse chains with a significant persistence length. Experiments show that liquid crystals phases form above a critical volume fraction depending on the duplex length. We introduce and investigate via numerical simulations, a coarse-grained model of DNA double-helical duplexes. Each duplex is represented as an hard quasi-cylinder whose bases are decorated with two identical reactive sites. The stacking interaction between terminal sites is modeled via a short-range square-well potential. We compare the numerical results with predictions based on a free energy functional and find satisfactory quantitative matching of the isotropic-nematic phase boundary and of the system structure. Comparison of numerical and theoretical results with experimental findings confirm that the DNA duplexes self-assembly can be properly modeled via equilibrium polymerization of cylindrical particles and enables us to estimate the stacking energy.
TL;DR: A generalized approach for electrowetting is proposed that, among other results, can shed new light on contact angle saturation and is shown to be applicable to several AC and DC experimental Electrowetting-on-dielectric (EWOD) setups.
Abstract: While electrowetting has many applications, it is limited at large voltages by contact angle saturation - a phenomenon that is still not well understood. We propose a generalized approach for electrowetting that, among other results, can shed new light on contact angle saturation. The model assumes the existence of a minimum (with respect to the contact angle) in the electric energy and accounts for a quadratic voltage dependence ~U^2 in the low-voltage limit, compatible with the Young-Lippmann formula, and a ~1/U^2 saturation at the high-voltage limit. Another prediction is the surprising possibility of a reversed electrowetting regime, in which the contact angle increases with applied voltage. By explicitly taking into account the effect of the counter-electrode, our model is shown to be applicable to several AC and DC experimental electrowetting-on-dielectric (EWOD) setups. Several features seen in experiments compare favorably with our results. Furthermore, the AC frequency dependence of EWOD agrees quantitatively with our predictions. Our numerical results are complemented with simple analytical expressions for the saturation angle in two practical limits.
TL;DR: Magnetic and NMR relaxivity properties of embedded Fe2O3 nanoparticles embedded into the walls of polyelectrolyte multilayer capsules and freely dispersed in a sodium borate buffer solution have been investigated.
Abstract: Magnetic and NMR relaxivity properties of {\gamma}-Fe2O3 nanoparticles embedded into the walls of polyelectrolyte multilayer capsules and freely dispersed in a sodium borate buffer solution have been investigated The different geometric distribution of both configurations provides the opportunity to study the relationship of water accessibility and magnetic properties of particles on the NMR relaxivity Changes in their blocking temperature and average dipolar field were modeled as a function of packing fraction in the ensemble of free and entrapped nanoparticles For free nanoparticles with relatively low concentration, relaxivity values increase with packing fraction according to an increase in the dipolar field and larger water accessibility However for embedded NPs in the capsule wall, packing fractions should be limited to optimise the efficiency of this system as magnetic resonance imaging (MRI) contrast agent
TL;DR: This model elucidate the relevant energy terms required to understand the size-dependent uptake mechanism and verify it by correctly predicting the behavior at large and small particle sizes.
Abstract: We present a simple two-state model to understand the size-dependent endocytosis of nanoparticles. Using this model, we elucidate the relevant energy terms required to understand the size-dependent uptake mechanism and verify it by correctly predicting the behavior at large and small particle sizes. In the absence of interactions between the nanoparticles we observe an asymmetric distribution of sizes with maximum uptake at intermediate sizes and a minimum size cut-off below which there can be no endocytosis. Including the effect of interactions in our model has remarkable effects on the uptake characteristics. Attractive interactions shift the minimum size cut-off and increase the optimal uptake while repulsive interactions make the distribution more symmetric lowering the optimal uptake.
TL;DR: It is shown that the quasicrystal approximant is more stable than the dimer crystal for packing densities below 84% using Monte Carlo computer simulations and free energy calculations.
Abstract: Advancements in the synthesis of faceted nanoparticles and colloids have spurred interest in the phase behavior of polyhedral shapes Regular tetrahedra have attracted particular attention because they prefer local symmetries that are incompatible with periodicity Two dense phases of regular tetrahedra have been reported recently The densest known tetrahedron packing is achieved in a crystal of triangular bipyramids (dimers) with packing density 4000/4671=8563% In simulation a dodecagonal quasicrystal is observed; its approximant, with periodic tiling (343^24), can be compressed to a packing fraction of 8503% Here, we show that the quasicrystal approximant is more stable than the dimer crystal for packing densities below 84% using Monte Carlo computer simulations and free energy calculations To carry out the free energy calculations, we use a variation of the Frenkel-Ladd method for anisotropic shapes and thermodynamic integration The enhanced stability of the approximant can be attributed to a network substructure, which maximizes the free volume (and hence the 'wiggle room') available to the particles and facilitates correlated motion of particles, which further contributes to entropy and leads to diffusion for packing densities below 65% The existence of a solid-solid transition between structurally distinct phases not related by symmetry breaking -- the approximant and the dimer crystal-- is unusual for hard particle systems
TL;DR: In this article, it was shown that for any liquid or solid with strong correlation between its virial and potential-energy equilibrium fluctuations, the temperature is a product of a function of excess entropy per particle and density.
Abstract: We show that for any liquid or solid with strong correlation between its $NVT$ virial and potential-energy equilibrium fluctuations, the temperature is a product of a function of excess entropy per particle and a function of density, $T=f(s)h(\rho)$. This implies that 1) the system's isomorphs (curves in the phase diagram of invariant structure and dynamics) are described by $h(\rho)/T={\rm Const.}$, 2) the density-scaling exponent is a function of density only, 3) a Gr{\"u}neisen-type equation of state applies for the configurational degrees of freedom. For strongly correlating atomic systems one has $h(\rho)=\sum_nC_n\rho^{n/3}$ in which the only non-zero terms are those appearing in the pair potential expanded as $v(r)=\sum_n v_n r^{-n}$. Molecular dynamics simulations of Lennard-Jones type systems confirm the theory.
TL;DR: It is shown that different measures of the persistence length are not mutually consistent with each other and depend distinctly both on N(b) and the solvent quality, and that even at the theta point the side chains are considerably stretched.
Abstract: By Molecular Dynamics simulation of a coarse-grained bead-spring type model for a cylindrical molecular brush with a backbone chain of $N_b$ effective monomers to which with grafting density $\sigma$ side chains with $N$ effective monomers are tethered, several characteristic length scales are studied for variable solvent quality. Side chain lengths are in the range $5 \le N \le 40$, backbone chain lengths are in the range $50 \le N_b \le 200$, and we perform a comparison to results for the bond fluctuation model on the simple cubic lattice (for which much longer chains are accessible, $N_b \le 1027$, and which corresponds to an athermal, very good, solvent). We obtain linear dimensions of side chains and the backbone chain and discuss their $N$-dependence in terms of power laws and the associated effective exponents. We show that even at the Theta point the side chains are considerably stretched, their linear dimension depending on the solvent quality only weakly. Effective persistence lengths are extracted both from the orientational correlations and from the backbone end-to-end distance; it is shown that different measures of the persistence length (which would all agree for Gaussian chains) are not mutually consistent with each other, and depend distinctly both on $N_b$ and the solvent quality. A brief discussion of pertinent experiments is given.
TL;DR: In this paper, the authors used x-ray diffraction measurements with high energy-resolution and accuracy to study water structure at three different temperatures (7, 25 and 66 C) under normal pressure.
Abstract: We have developed x-ray diffraction measurements with high energy-resolution and accuracy to study water structure at three different temperatures (7, 25 and 66 C) under normal pressure. Using a spherically curved Ge crystal an energy resolution better than 15 eV has been achieved which eliminates influence from Compton scattering. The high quality of the data allows a precise oxygen-oxygen pair correlation function (PCF) to be directly derived from the Fourier transform of the experimental data resolving shell structure out to ~12 {\AA}, i.e. 5 hydration shells. Large-scale molecular dynamics (MD) simulations using the TIP4P/2005 force-field reproduce excellently the experimental shell-structure in the range 4-12 {\AA} although less agreement is seen for the first peak in the PCF. The Local Structure Index [J. Chem. Phys. 104, 7671 (1996)] identifies a tetrahedral minority giving the intermediate-range oscillations in the PCF and a disordered majority providing a more featureless background in this range. The current study supports the proposal that the structure of liquid water, even at high temperatures, can be described in terms of a two-state fluctuation model involving local structures related to the high-density and low-density forms of liquid water postulated in the liquid-liquid phase transition hypothesis.
TL;DR: In this paper, a simple model for a carrier-cargo system was proposed, where a catalytically active particle connected by a thin rigid rod to a cargo particle was considered.
Abstract: Catalytically active particles suspended in a liquid can move due to self-phoresis by generating solute gradients via chemical reactions of the solvent occurring at parts of their surface. Such particles can be used as carriers at the micro-scale. As a simple model for a carrier-cargo system we consider a catalytically active particle connected by a thin rigid rod to a catalytically inert cargo particle. We show that the velocity of the composite strongly depends on the relative orientation of the carrier-cargo link. Accordingly, there is an optimal configuration for the linkage. The subtlety of such carriers is underscored by the observation that a spherical particle completely covered by catalyst, which is motionless when isolated, acts as a carrier once attached to a cargo.
TL;DR: Comparing signals from C(70)-derivatives with different side-chains, it is obtained experimental proof that the polaron is localized on the cage of the C( 70) molecule.
Abstract: Charged polarons in thin films of polymer-fullerene composites are investigated by light-induced electron paramagnetic resonance (EPR) at 9.5 GHz (X-band) and 130 GHz (D-band). The materials studied were poly(3-hexylthiophene) (PHT), [6,6]-phenyl-C61-butyric acid methyl ester (C60-PCBM), and two different soluble C70-derivates: C70-PCBM and diphenylmethano[70]fullerene oligoether (C70-DPM-OE). The first experimental identification of the negative polaron localized on the C70-cage in polymer-fullerene bulk heterojunctions has been obtained. When recorded at conventional X-band EPR, this signal is overlapping with the signal of the positive polaron, which does not allow for its direct experimental identification. Owing to the superior spectral resolution of the high frequency D-band EPR, we were able to separate light-induced signals from P+ and P- in PHT-C70 bulk heterojunctions. Comparing signals from C70-derivatives with different side-chains, we have obtained experimental proof that the polaron is localized on the cage of the C70 molecule.
TL;DR: A systematic expansion of the many-body master equation for active matter, in which motors power configurational changes as in the cytoskeleton, is shown to yield a description of the steady state and responses in terms of an effective temperature.
Abstract: A systematic expansion of the many-body master equation for active matter, in which motors power configurational changes as in the cytoskeleton, is shown to yield a description of the steady state and responses in terms of an effective temperature. The effective temperature depends on the susceptibility of the motors and a Peclet number which measures their strength relative to thermal Brownian diffusion. The analytic prediction is shown to agree with previous numerical simulations and experiments. The mapping also establishes a description of aging in active matter that is also kinetically jammed.
TL;DR: A general theory of nucleation for colloids and macromolecules in solution is formulated within the context of fluctuating hydrodynamics and provides a justification and extension of more heuristic equilibrium approaches based solely on the free energy.
Abstract: A general theory of nucleation for colloids and macromolecules in solution is formulated within the context of fluctuating hydrodynamics. A formalism for the determination of nucleation pathways is developed and stochastic differential equations for the evolution of order parameters are given. The conditions under which the elements of Classical Nucleation Theory are recovered are determined. The theory provides a justification and extension of more heuristic equilibrium approaches based solely on the free energy. It is illustrated by application to the low-concentration/high-concentration transition in globular proteins where a novel two-step mechanism is identified where the first step involves the formation of long-wavelength density fluctuations and the second step is the actual nucleation event occuring within the fluctuation.
Posted Content•
TL;DR: This work elucidates the physics of driven translocation and proposes its dynamical scaling scenario analogous to that in the surface growth phenomena and identifies three distinct non-equilibrium regimes reflecting the steady-state property of a dragged polymer with finite extensibility.
Abstract: By analyzing the real space nonequilibrium dynamics of polymers, we elucidate the physics of driven translocation and propose its dynamical scaling scenario analogous to that in the surface growth phenomena. We provide a detailed account of the previously proposed tension-propagation formulation and extend it to cover the broader parameter space relevant to real experiments; In addition to a near-equilibrium regime, we identify three distinct nonequilibrium regimes reflecting the steady-state property of a dragged polymer with the finite extensibility. Finite size effects are also pointed out. These elements are shown to be crucial for the appropriate comparison with experiments and simulations.
Posted Content•
TL;DR: In this paper, the authors made connection of the dynamics of solvated proteins including the dynamic transition to that of glass-forming substances, but no connection is made to the similar change of temperature dependence of obtained by quasielastic neutron scattering when crossing the glass transition temperature Tg, generally observed in inorganic, organic and polymeric glass-formers.
Abstract: Mossbauer spectroscopy and neutron scattering measurements on proteins embedded in solvents including water and aqueous mixtures have emphasized the observation of the distinctive temperature dependence of the atomic mean square displacements, , commonly referred to as the dynamic transition at some temperature Td. At low temperatures, increases slowly, but it assume stronger temperature dependence after crossing Td, which depends on the time/frequency resolution of the spectrometer. Various authors have made connection of the dynamics of solvated proteins including the dynamic transition to that of glass-forming substances. Notwithstanding, no connection is made to the similar change of temperature dependence of obtained by quasielastic neutron scattering when crossing the glass transition temperature Tg, generally observed in inorganic, organic and polymeric glass-formers. Evidences are presented to show that such change of the temperature dependence of from neutron scattering at Tg is present in hydrated or solvated proteins, as well as in the solvents used unsurprisingly since the latter is just another organic glass-formers. The obtained by neutron scattering at not so low temperatures has contributions from the dissipation of molecules while caged by the anharmonic intermolecular potential at times before dissolution of cages by the onset of the Johari-Goldstein beta-relaxation. The universal change of at Tg of glass-formers had been rationalized by sensitivity to change in volume and entropy of the beta-relaxation, which is passed onto the dissipation of the caged molecules and its contribution to . The same rationalization applies to hydrated and solvated proteins for the observed change of at Tg.
TL;DR: In this paper, an analytical model of aeolian sand transport is presented, which quantifies the momentum transfer from the wind to the transported sand by providing expressions for the thickness of the saltation layer and the apparent surface roughness.
Abstract: We present an analytical model of aeolian sand transport. The model quantifies the momentum transfer from the wind to the transported sand by providing expressions for the thickness of the saltation layer and the apparent surface roughness. These expressions are derived from basic physical principles and a small number of assumptions. The model further predicts the sand transport rate (mass flux) and the impact threshold (the smallest value of the wind shear velocity at which saltation can be sustained). We show that, in contrast to previous studies, the present model's predictions are in very good agreement with a range of experiments, as well as with numerical simulations of aeolian saltation. Because of its physical basis, we anticipate that our model will find application in studies of aeolian sand transport on both Earth and Mars.