Showing papers in "arXiv: Soft Condensed Matter in 2017"
TL;DR: In this paper, the dynamics of cylindrical armoured bubbles excited by mechanical vibrations were studied and it was shown through energy balance that nonspherical armoured bubbles constitute a metastable state and the vibration instills the activation energy necessary for the bubble to return to its least energetic stable state.
Abstract: In this paper, we study the dynamics of cylindrical armoured bubbles excited by mechanical vibrations. A step by step transition from cylindrical to spherical shape is reported as the intensity of the vibration is increased, leading to a reduction of the bubble surface and a dissemination of the excess particles. We demonstrate through energy balance that nonspherical armoured bubbles constitute a metastable state. The vibration instills the activation energy necessary for the bubble to return to its least energetic stable state: a spherical armoured bubble. At this point, particle desorption can only be achieved through higher amplitude of excitation required to overcome capillary retention forces. Nonspherical armoured bubbles open perspectives for tailored localized particle dissemination with limited excitation power.
385 citations
TL;DR: A series of achiral asymmetric dimers with an odd number of atoms in the spacer are reported, which form twisted structures in nematic as well as in lamellar phases, and the short-pitch helical structure in the smectic phases is confirmed by resonant X-ray measurements.
Abstract: A series of asymmetric dimers with an odd number of atoms in the spacer were found to form different types of twisted structures despite being achiral. The formation of a variety of helical structures is accompanied by a gradual freezing of molecular rotation. The tight pitch heliconical nematic (NTB) phase and heliconical tilted smectic C (SmCTB) phase are formed. In the lowest temperature smectic phase, HexI, the twist is expressed through the formation of hierarchical structure: nano-scale helices and mesoscopic helical filaments. The short pitch helical structure in smectic phases is confirmed by resonant x-ray measurements.
147 citations
TL;DR: In this paper, discrete particle simulations are used to study the shear rheology of dense, stabilized, frictional particulate suspensions in a viscous liquid, toward development of a constitutive model for steady shear flows at arbitrary stress.
Abstract: Discrete particle simulations are used to study the shear rheology of dense, stabilized, frictional particulate suspensions in a viscous liquid, toward development of a constitutive model for steady shear flows at arbitrary stress. These suspensions undergo increasingly strong continuous shear thickening (CST) as solid volume fraction $\phi$ increases above a critical volume fraction, and discontinuous shear thickening (DST) is observed for a range of $\phi$. When studied at controlled stress, the DST behavior is associated with non-monotonic flow curves of the steady-state stress as a function of shear rate. Recent studies have related shear thickening to a transition between mostly lubricated to predominantly frictional contacts with the increase in stress. In this study, the behavior is simulated over a wide range of the dimensionless parameters $(\phi,\tilde{\sigma}$, and $\mu)$, with $\tilde{\sigma} = \sigma/\sigma_0$ the dimensionless shear stress and $\mu$ the coefficient of interparticle friction: the dimensional stress is $\sigma$, and $\sigma_0 \propto F_0/ a^2$, where $F_0$ is the magnitude of repulsive force at contact and $a$ is the particle radius. The data have been used to populate the model of the lubricated-to-frictional rheology of Wyart and Cates [Phys. Rev. Lett.{\bf 112}, 098302 (2014)], which is based on the concept of two viscosity divergences or \textquotedblleft jamming\textquotedblright\ points at volume fraction $\phi_{\rm J}^0 = \phi_{\rm rcp}$ (random close packing) for the low-stress lubricated state, and at $\phi_{\rm J} (\mu) < \phi_{\rm J}^0$ for any nonzero $\mu$ in the frictional state; a generalization provides the normal stress response as well as the shear stress. A flow state map of this material is developed based on the simulation results.
107 citations
TL;DR: Network-based approaches to studying granular materials (and particulate matter more generally) are reviewed and the potential of such frameworks to provide a useful description of these materials is explored to enhance understanding of the underlying physics is explored.
Abstract: The arrangements of particles and forces in granular materials have a complex organization on multiple spatial scales that ranges from local structures to mesoscale and system-wide ones. This multiscale organization can affect how a material responds or reconfigures when exposed to external perturbations or loading. The theoretical study of particle-level, force-chain, domain, and bulk properties requires the development and application of appropriate physical, mathematical, statistical, and computational frameworks. Traditionally, granular materials have been investigated using particulate or continuum models, each of which tends to be implicitly agnostic to multiscale organization. Recently, tools from network science have emerged as powerful approaches for probing and characterizing heterogeneous architectures across different scales in complex systems, and a diverse set of methods have yielded fascinating insights into granular materials. In this paper, we review work on network-based approaches to studying granular matter and explore the potential of such frameworks to provide a useful description of these systems and to enhance understanding of their underlying physics. We also outline a few open questions and highlight particularly promising future directions in the analysis and design of granular matter and other kinds of material networks.
93 citations
TL;DR: In this article, a review of single polymer dynamics is examined by highlighting major developments and new physics to emerge from these techniques, including the role of flexibility, excluded volume interactions, and hydrodynamic interactions in governing behavior.
Abstract: Single polymer dynamics offers a powerful approach to study molecular-level interactions and dynamic microstructure in materials. Direct visualization of single chain dynamics has uncovered new ideas regarding the rheology and non-equilibrium dynamics of macromolecules, including the importance of molecular individualism, dynamic heterogeneity, and molecular sub-populations that govern macroscale behavior. In recent years, the field of single polymer dynamics has been extended to increasingly complex materials, including architecturally complex polymers such as combs, bottlebrushes, and ring polymers and entangled solutions of long chain polymers in flow. Single molecule visualization, complemented by modeling and simulation techniques such as Brownian dynamics and Monte Carlo methods, allow for unparalleled access to the molecular-scale dynamics of polymeric materials. In this review, recent progress in the field of single polymer dynamics is examined by highlighting major developments and new physics to emerge from these techniques. The molecular properties of DNA as a model polymer are examined, including the role of flexibility, excluded volume interactions, and hydrodynamic interactions in governing behavior. Recent developments in studying polymer dynamics in time-dependent flows, new chemistries and new molecular topologies, and the role of intermolecular interactions in concentrated solutions are considered. Moreover, cutting-edge methods in simulation techniques are further reviewed as an ideal complementary method to single polymer experiments. Future work aimed at extending the field of single polymer dynamics to new materials promises to uncover original and unexpected information regarding the flow dynamics of polymeric systems.
93 citations
[...]
TL;DR: In this paper, the authors used a combination of experiments, theory, continuum computational analysis, and molecular dynamics simulations to provide mechanistic insights into the geometric and topological design of kirigami actuators.
Abstract: Thin elastic sheets bend easily and, if they are patterned with cuts, can deform in sophisticated ways Here we show that carefully tuning the location and arrangement of cuts within thin sheets enables the design of mechanical actuators that scale down to atomically-thin 2D materials We first show that by understanding the mechanics of a single, non-propagating crack in a sheet we can generate four fundamental forms of linear actuation: roll, pitch, yaw, and lift Our analytical model shows that these deformations are only weakly dependent on thickness, which we confirm with experiments at centimeter scale objects and molecular dynamics simulations of graphene and MoS$_{2}$ nanoscale sheets We show how the interactions between non-propagating cracks can enable either lift or rotation, and we use a combination of experiments, theory, continuum computational analysis, and molecular dynamics simulations to provide mechanistic insights into the geometric and topological design of kirigami actuators
81 citations
TL;DR: In this article, the authors investigate the distinct conformational changes of outer and inner stems of S. lepidophylla triggered by dehydration, and reveal that the outer stems bend into circular rings in a relatively short period of desiccation, whereas inner stems curl slowly into spirals due to hydro-actuated strain gradient along their length.
Abstract: The spirally arranged stems of the spikemoss Selaginella lepidophylla, an ancient resurrection plant, compactly curl into a nest-ball shape upon dehydration. Due to its spiral phyllotaxy, older outer stems on the plant interlace and envelope the younger inner stems forming the plant centre. Stem curling is a morphological mechanism that limits photoinhibitory and thermal damages the plant might experience in arid environments. Here, we investigate the distinct conformational changes of outer and inner stems of S. lepidophylla triggered by dehydration. Outer stems bend into circular rings in a relatively short period of desiccation, whereas inner stems curl slowly into spirals due to hydro-actuated strain gradient along their length. This arrangement eases both the tight packing of the plant during desiccation and its fast opening upon rehydration. The insights gained from this work shed light on the hydro-responsive movements in plants and might contribute to the development of deployable structures with remarkable shape transformations in response to environmental stimuli.
76 citations
TL;DR: In this article, a method of experimental and numerical analysis of localized structures in liquid crystals was introduced, similar to the mathematical Hopf maps, which relates all points of the medium's order parameter space to their closed-loop preimages within the 3D solitons.
Abstract: Topological solitons are knots in continuous physical fields classified by non-zero Hopf index values. Despite arising in theories that span many branches of physics, from elementary particles to condensed matter and cosmology, they remain experimentally elusive and poorly understood. We introduce a method of experimental and numerical analysis of such localized structures in liquid crystals that, similar to the mathematical Hopf maps, relates all points of the medium's order parameter space to their closed-loop preimages within the three-dimensional solitons. We uncover a surprisingly large diversity of naturally occurring and laser-generated topologically nontrivial solitons with differently knotted nematic fields, which previously have not been realized in theories and experiments alike. We discuss the implications of the liquid crystal's non-polar nature on the knot soliton topology and how the medium's chirality, confinement and elastic anisotropy help to overcome the constrains of the Hobart-Derrick theorem, yielding static three-dimensional solitons without or with additional defects. Our findings will establish chiral nematics as a model system for experimental exploration of topological solitons and may impinge on understanding of such nonsingular field configurations in other branches of physics, as well as may lead to technological applications
68 citations
TL;DR: A review of the state of the art in this fast-growing field can be found in this paper, with a focus on its scientific and technological potential, as well as its potential for new discovery that may impinge on composite material fabrication, low-dimensional topology, photonics, and so on.
Abstract: Colloids are abundant in nature, science and technology, with examples ranging from milk to quantum dots and the "colloidal atom" paradigm. Similarly, liquid crystal ordering is important in contexts ranging from biological membranes to laboratory models of cosmic strings and liquid crystal displays in consumer devices. Some of the most exciting recent developments in both of these soft matter fields emerge at their interface, in the fast-growing research arena of liquid crystal colloids. Mesoscale self-assembly in such systems may lead to artificial materials and structures with emergent physical behavior arising from patterning of molecular order and nano- or micro-particles into precisely controlled configurations. Liquid crystal colloids show an exceptional promise of new discovery that may impinge on the composite material fabrication, low-dimensional topology, photonics, and so on. Starting from physical underpinnings, I review the state of art in this fast-growing field, with a focus on its scientific and technological potential.
61 citations
Posted Content•
TL;DR: In this article, the spatio-temporal distribution of cellular stresses from measured traction forces in motile tissues and show that such traction-based stresses match those calculated from instantaneous cell shapes.
Abstract: Collective cell migration is a highly regulated process involved in wound healing, cancer metastasis and morphogenesis. Mechanical interactions among cells provide an important regulatory mechanism to coordinate such collective motion. Using a Self-Propelled Voronoi (SPV) model that links cell mechanics to cell shape and cell motility, we formulate a generalized mechanical inference method to obtain the spatio-temporal distribution of cellular stresses from measured traction forces in motile tissues and show that such traction-based stresses match those calculated from instantaneous cell shapes. We additionally use stress information to characterize the rheological properties of the tissue. We identify a motility-induced swim stress that adds to the interaction stress to determine the global contractility or extensibility of epithelia. We further show that the temporal correlation of the interaction shear stress determines an effective viscosity of the tissue that diverges at the liquid-solid transition, suggesting the possibility of extracting rheological information directly from traction data.
60 citations
Posted Content•
TL;DR: In this article, a DNA origami-based tensegrity triangle structure was used to construct a 3D rhombohedral crystalline lattice, where 10 nm and 20 nm gold particles were placed within the lattice.
Abstract: Engineering shape and interactions of nanoscopic building blocks allows for the assembly of rationally designed macroscopic three-dimensional (3D) materials with spatial accuracy inaccessible to top-down fabrication methods. Owing to its sequence-specific interaction, DNA is often used as selective binder to connect metallic nanoparticles into highly ordered lattices. Moreover, 3D crystals assembled entirely from DNA have been proposed and implemented with the declared goal to arrange guest molecules in predefined lattices. This requires design schemes that provide high rigidity and sufficiently large open guest space. We here present a DNA origami-based tensegrity triangle structure that assembles into a 3D rhombohedral crystalline lattice. We site-specifically place 10 nm and 20 nm gold particles within the lattice, demonstrating that our crystals are spacious enough to host e.g. ribosome-sized macromolecules. We validate the accurate assembly of the DNA origami lattice itself as well as the precise incorporation of gold particles by electron microscopy and small angle X-ray scattering (SAXS) experiments. Our results show that it is possible to create DNA building blocks that assemble into lattices with customized geometry. Site-specific hosting of nano objects in the transparent DNA lattice sets the stage for metamaterial and structural biology applications.
TL;DR: In this article, a comparative study of the Unified Colored Noise Approximation (UCNA) and the approximation scheme by Fox recently employed within this context is performed, and it is shown that in the presence of translational white noise the Fox approach is more accurate.
Abstract: The equations of motion of active systems can be modeled in terms of Ornstein-Uhlenbeck processes (OUPs) with appropriate correlators. For further theoretical studies, these should be approximated to yield a Markovian picture for the dynamics and a simplified steady-state condition. We perform a comparative study of the Unified Colored Noise Approximation (UCNA) and the approximation scheme by Fox recently employed within this context. We review the approximations necessary to define effective interaction potentials in the low-density limit and study the conditions for which these represent the behavior observed in two-body simulations for the OUPs model and Active Brownian particles. The demonstrated limitations of the theory for potentials with a negative slope or curvature can be qualitatively corrected by a new empirical modification. In general, we find that in the presence of translational white noise the Fox approach is more accurate. Finally, we examine an alternative way to define a force-balance condition in the limit of small activity.
TL;DR: In this article, particle surface chemistry can play a central role in creating conditions that allow reversible shear jamming (SJ) into a state with finite yield stress, and the system's ability to form interparticle hydrogen bonds when sheared into contact elicits SJ.
Abstract: Dense suspensions of hard particles in a liquid can exhibit strikingly counter-intuitive behavior, such as discontinuous shear thickening (DST) [1-8] and reversible shear jamming (SJ) into a state with finite yield stress [9-13]. Recent studies identified a stress-activated crossover from hydrodynamic interactions to frictional particle contacts to be key for these behaviors [2-4, 6-8, 10, 14]. However, many suspensions exhibit only DST and not SJ. Here we show that particle surface chemistry can play a central role in creating conditions that allow for SJ. We find the system's ability to form interparticle hydrogen bonds when sheared into contact elicits SJ. We demonstrate this with charge-stabilized polymer microspheres and non-spherical cornstarch particles, controlling hydrogen bond formation with solvents. The propensity for SJ is quantified by tensile tests [13] and linked to an enhanced friction by atomic force microscopy. Our results extend the fundamental understanding of the SJ mechanism and open new avenues for designing strongly non-Newtonian fluids.
TL;DR: In this paper, the effects of distortions caused by chiral springs and helices on the colloidal self-organization in a nematic liquid crystal using laser tweezers, particle tracking and optical imaging are investigated.
Abstract: Colloidal particles disturb the alignment of rod-like molecules of liquid crystals, giving rise to long-range interactions that minimize the free energy of distorted regions. Particle shape and topology are known to guide this self-assembly process. However, how chirality of colloidal inclusions affects these long-range interactions is unclear. Here we study the effects of distortions caused by chiral springs and helices on the colloidal self-organization in a nematic liquid crystal using laser tweezers, particle tracking and optical imaging. We show that chirality of colloidal particles interacts with the nematic elasticity to predefine chiral or racemic colloidal superstructures in nematic colloids. These findings are consistent with numerical modelling based on the minimization of Landau-de Gennes free energy. Our study uncovers the role of chirality in defining the mesoscopic order of liquid crystal colloids, suggesting that this feature may be a potential tool to modulate the global orientated self-organization of these systems.
TL;DR: In this paper, the steady state profile of an active polar flock on a two-sphere and a catenoid is analyzed, and it is shown that curvature and active flow together result in symmetry protected topological modes that get localized to special geodesics on the surface (the equator or the neck respectively).
Abstract: Active systems on curved geometries are ubiquitous in the living world. In the presence of curvature orientationally ordered polar flocks are forced to be inhomogeneous, often requiring the presence of topological defects even in the steady state due to the constraints imposed by the topology of the underlying surface. In the presence of spontaneous flow the system additionally supports long-wavelength propagating sound modes which get gapped by the curvature of the underlying substrate. We analytically compute the steady state profile of an active polar flock on a two-sphere and a catenoid, and show that curvature and active flow together result in symmetry protected topological modes that get localized to special geodesics on the surface (the equator or the neck respectively). These modes are the analogue of edge states in electronic quantum Hall systems and provide unidirectional channels for information transport in the flock, robust against disorder and backscattering.
TL;DR: In this paper, a Doi-Onsager kinetic theory based on microscopic modeling is used to analyze a suspension of immotile "extensor" particles that exert active extensile dipolar stresses on the fluid in which they are immersed.
Abstract: We analyze one of the simplest active suspensions with complex dynamics: a suspension of immotile "Extensor" particles that exert active extensile dipolar stresses on the fluid in which they are immersed. This is relevant to several experimental systems, such as recently studied tripartite rods that create extensile flows by consuming a chemical fuel. We first describe the system through a Doi-Onsager kinetic theory based on microscopic modeling. This theory captures the active stresses produced by the particles that can drive hydrodynamic instabilities, as well as the steric interactions of rod-like particles that lead to nematic alignment. This active nematic system yields complex flows and disclination defect dynamics very similar to phenomenological Landau-deGennes Q-tensor theories for active nematic fluids, as well as by more complex Doi-Onsager theories for polar microtubule/motor-protein systems. We apply the quasi-equilibrium Bingham closure, used to study suspensions of passive microscopic rods, to develop a non-standard Q-tensor theory. We demonstrate through simulation that this "BQ-tensor" theory gives an excellent analytical and statistical accounting of the suspension's complex dynamics, at a far reduced computational cost. Finally, we apply the BQ-tensor model to study the dynamics of Extensor suspensions in circular and bi-concave domains. In circular domains, we reproduce previous results for systems with weak nematic alignment, but for strong alignment find novel dynamics with activity-controlled defect production and absorption at the boundaries of the domain. In bi-concave domains, a Fredericks-like transition occurs as the width of the neck connecting the two disks is varied.
TL;DR: In this paper, the authors demonstrate that an active isotropic fluid, comprised of microtubules and molecular motors, autonomously flows through meter-long three-dimensional channels, and establish control over the magnitude, velocity profile and direction of the self-organized flows, and correlate these to the structure of extensile microtubule bundles.
Abstract: Transport of fluid through a pipe is essential for the operation of macroscale machines and microfluidic devices. Conventional fluids only flow in response to external pressure. We demonstrate that an active isotropic fluid, comprised of microtubules and molecular motors, autonomously flows through meter-long three-dimensional channels. We establish control over the magnitude, velocity profile and direction of the self-organized flows, and correlate these to the structure of the extensile microtubule bundles. The inherently three-dimensional transition from bulk-turbulent to confined-coherent flows occurs concomitantly with a transition in the bundle orientational order near the surface, and is controlled by a scale-invariant criterion related to the channel profile. The non-equilibrium transition of confined isotropic active fluids can be used to engineer self-organized soft machines.
TL;DR: In this article, the authors describe a type of colloidal gels called equilibrium gels, which are low-packing arrested states of matter which are able to support stress on cooling.
Abstract: Gels are low-packing arrested states of matter which are able to support stress. On cooling, limited valence colloidal particles form open networks stabilized by the progressive increase of the interparticle bond lifetime. These gels, named equilibrium gels, are the focus of this review article. Differently from other types of colloidal gels, equilibrium gels do not require an underlying phase separation to form. Oppositely, they form in a region of densities deprived of thermodynamic instabilities. Limited valence equilibrium gels neither coarsen nor age with time.
TL;DR: It is shown that, beyond its chemical properties, the detailed shape of a catalytic swimmer plays an essential role in determining its direction of motion, demonstrating the compatibility of the classical theoretical framework with experimental observations.
Abstract: Catalytic swimmers have attracted much attention as alternatives to biological systems for examining collective microscopic dynamics and the response to physico-chemical signals. Yet, understanding and predicting even the most fundamental characteristics of their individual propulsion still raises important challenges. While chemical asymmetry is widely recognized as the cornerstone of catalytic propulsion, different experimental studies have reported that particles with identical chemical properties may propel in opposite directions. Here, we show that, beyond its chemical properties, the detailed shape of a catalytic swimmer plays an essential role in determining its direction of motion, demonstrating the compatibility of the classical theoretical framework with experimental observations.
Posted Content•
TL;DR: The results show that the equations of state of ABPs account for their phase behaviour, providing a firm basis to describe MIPS as an equilibrium-like phase transition.
Abstract: As a result of the competition between self-propulsion and excluded volume interactions, purely repulsive self-propelled spherical particles undergo a motility-induced phase separation (MIPS). We carry out a systematic computational study, considering several interaction potentials, systems confined by hard walls or with periodic boundary conditions, and different initial protocols. This approach allows us to identify that, despite its non-equilibrium nature, the equations of state of Active Brownian Particles (ABP) across MIPS verify the characteristic properties of first-order liquid-gas phase transitions, meaning, equality of pressure of the coexisting phases once a nucleation barrier has been overcome and, in the opposite case, hysteresis around the transition as long as the system remains in the metastable region. Our results show that the equations of state of ABPs quantitatively account for their phase behaviour, providing a firm basis to describe MIPS as an equilibrium-like phase transition.
Posted Content•
TL;DR: In this paper, an elastic filament, pinned at one end, acted on by a molecular motor treated as a point force is considered, leading to flapping motion analogous to the high Reynolds number oscillations of a garden hose with a free end.
Abstract: It is known from the wave-like motion of microtubules in motility assays that the piconewton forces that motors produce can be sufficient to bend the filaments. In cellular phenomena such as cytosplasmic streaming, molecular motors translocate along cytoskeletal filaments, carrying cargo which entrains fluid. When large numbers of such forced filaments interact through the surrounding fluid, as in particular stages of oocyte development in $Drosophila~melanogaster$, complex dynamics are observed, but the detailed mechanics underlying them has remained unclear. Motivated by these observations, we study here perhaps the simplest model for these phenomena: an elastic filament, pinned at one end, acted on by a molecular motor treated as a point force. Because the force acts tangential to the filament, no matter what its shape, this "follower-force" problem is intrinsically non-variational, and thereby differs fundamentally from Euler buckling, where the force has a fixed direction, and which, in the low Reynolds number regime, ultimately leads to a stationary, energy-minimizing shape. Through a combination of linear stability theory, analytical study of a solvable simplified "two-link" model, and numerical studies of the full elastohydrodynamic equations of motion we elucidate the Hopf bifurcation that occurs with increasing forcing of a filament, leading to flapping motion analogous to the high Reynolds number oscillations of a garden hose with a free end.
TL;DR: The feasibility of computing the required partition coefficients in DPD using brute-force simulation, within an adaptive semi-automatic staged optimization scheme, and the transferability of a subset of the determined parameters are illustrated by calculating the critical micelle concentrations and mean aggregation numbers of selected alkyl ethoxylate surfactants.
Abstract: We present a systematic, top-down, thermodynamic parametrization scheme for dissipative particle dynamics (DPD) using water-octanol partition coefficients, supplemented by water-octanol phase equilibria and pure liquid phase density data. We demonstrate the feasibility of computing the required partition coefficients in DPD using brute-force simulation, within an adaptive semi-automatic staged optimization scheme. We test the methodology by fitting to experimental partition coefficient data for twenty one small molecules in five classes comprising alcohols and poly-alcohols, amines, ethers and simple aromatics, and alkanes (i.e. hexane). Finally, we illustrate the transferability of a subset of the determined parameters by calculating the critical micelle concentrations of selected alkyl ethoxylate surfactants, in good agreement with reported experimental values.
TL;DR: In this article, a dynamical density functional theory for colored noise models is proposed to explain why the related thermodynamic results for pressure and interfacial tension do not represent the results one would measure mechanically.
Abstract: Active particles driven by colored noise can be approximately mapped onto a system that obeys detailed balance. The effective interactions which can be derived for such a system allow to describe the structure and phase behavior of the active fluid by means of an effective free energy. In this paper we explain why the related thermodynamic results for pressure and interfacial tension do not represent the results one would measure mechanically. We derive a dynamical density functional theory, which in the steady state simultaneously validates the use of effective interactions and provides access to mechanical quantities. Our calculations suggest that in the colored-noise model the mechanical pressure in coexisting phases might be unequal and the interfacial tension can become negative.
TL;DR: In this article, a coarse-grained molecular dynamics model was proposed to screen thermodynamic properties of small molecules in cell membranes. But the model requires significant sampling at the atomistic level.
Abstract: The partitioning of small molecules in cell membranes---a key parameter for pharmaceutical applications---typically relies on experimentally-available bulk partitioning coefficients. Computer simulations provide a structural resolution of the insertion thermodynamics via the potential of mean force, but require significant sampling at the atomistic level. Here, we introduce high-throughput coarse-grained molecular dynamics simulations to screen thermodynamic properties. This application of physics based models in a large-scale study of small molecules establishes linear relationships between partitioning coefficients and key features of the potential of mean force. This allows us to predict the structure of the insertion from bulk experimental measurements for more than 400,000 compounds. The potential of mean force hereby becomes an easily accessible quantity---already recognized for its high predictability of certain properties, e.g., passive permeation. Further, we demonstrate how coarse graining helps reduce the size of chemical space, enabling a hierarchical approach to screening small molecules.
TL;DR: The experimental and numerical techniques presented here give experimental access to the stress tensor of a packing of deformed particles.
Abstract: We describe here how to apply the three dimensional imaging technique of refrecative index matched scanning to hydrogel spheres. Hydrogels are water based materials with a low refractive index, which allows for index matching with water-based solvent mixtures. We discuss here various experimental techniques required to handle specifically hydrogel spheres as opposed to other transparent materials. The deformability of hydrogel spheres makes their identification in three dimensional images non-trivial. We will also discuss numerical techniques that can be used in general to detect contacting, non-spherical particles in a three dimensional image. The experimental and numerical techniques presented here give experimental access to the stress tensor of a packing of deformed particles.
TL;DR: In this article, the transient response of model hard sphere glasses is examined during the application of steady rate start-up shear using Brownian Dynamics simulations, experimental rheology and confocal microscopy.
Abstract: The transient response of model hard sphere glasses is examined during the application of steady rate start-up shear using Brownian Dynamics (BD) simulations, experimental rheology and confocal microscopy. With increasing strain the glass initially exhibits an almost linear elastic stress increase, a stress peak at the yield point and then reaches a constant steady state. The stress overshoot has a non-monotonic dependence with Peclet number, Pe, and volume fraction, {\phi}, determined by the available free volume and a competition between structural relaxation and shear advection. Examination of the structural properties under shear revealed an increasing anisotropic radial distribution function, g(r), mostly in the velocity - gradient (xy) plane, which decreases after the stress peak with considerable anisotropy remaining in the steady-state. Low rates minimally distort the structure, while high rates show distortion with signatures of transient elongation. As a mechanism of storing energy, particles are trapped within a cage distorted more than Brownian relaxation allows, while at larger strains, stresses are relaxed as particles are forced out of the cage due to advection. Even in the steady state, intermediate super diffusion is observed at high rates and is a signature of the continuous breaking and reformation of cages under shear.
TL;DR: In this paper, the authors found that quasicrystals can be self-assembled by monodisperse, isotropic particles interacting via a simple potential without multiple length scales.
Abstract: In previous approaches to form quasicrystals, multiple competing length scales involved in particle size, shape or interaction potential are believed to be necessary. It is unexpected that quasicrystals can be self-assembled by monodisperse, isotropic particles interacting via a simple potential without multiple length scales. Here we report the surprising finding of the self-assembly of such quasicrystals in two dimensional systems of soft-core disks interacting via repulsions. We find not only dodecagonal but also octagonal quasicrystals, which have not been found yet in soft quasicrystals. In the self-assembly of such unexpected quasicrystals, particles tend to form pentagons, which are essential elements to form the quasicrystalline order. Our findings pave an unexpected and simple way to form quasicrystals and pose a new challenge for theoretical understanding of quasicrystals.
TL;DR: In this paper, the authors studied the active dynamics of self-propelled asymmetrical colloidal particles (Janus particles) fueled by an AC electric field and found that the speed and direction of the self-propulsion and the strength of attractive interaction between the particles can be controlled by tuning the frequency of applied electric fields and the ion concentration.
Abstract: We study the active dynamics of self-propelled asymmetrical colloidal particles (Janus particles) fueled by an AC electric field Both the speed and the direction of the self-propulsion and the strength of attractive interaction between the particles can be controlled by tuning the frequency of the applied electric field and the ion concentration of the solution The strong attractive force at high ion concentration give rise to chain formation of the Janus particles, which can be explained by the quadrupolar charge distribution on the particles The chain formation is observed irrespective of the direction of the self-propulsion of the particles When both the positions and the orientations of the heads of chains are fixed, they exhibit beating behavior reminiscent of eukaryotic flagella The beating frequency of the chains of the Janus particles depends on the applied voltage and thus on the self-propulsive force The scaling relation between the beating frequency and the self-propulsive force deviates from theoretical predictions made previously on active filaments However, this discrepancy is resolved by assuming that the attractive interaction between the particles is mediated by the quadrupolar distribution of the induced charges, which gives indirect but convincing evidence on the mechanisms of the Janus particles This signifies that the dependence between the propulsion mechanism and the interaction mechanism, which had been dismissed previously, can modify dispersion relations of beating behaviors In addition, hydrodynamic interaction within the chain and its effect on propulsion speed are discussed These provide new insights on active filaments such as optimal flagellar design for biological functions
TL;DR: In this article, the authors studied self-propulsion of half-coated spherical colloids in critical binary mixtures and showed that the coupling of local body forces, induced by laser illumination, and the wetting properties of the colloid, can be used to fine tune both the swimming speed and its directionality.
Abstract: Microorganisms are able to overcome the thermal randomness of their surroundings by harvesting energy to navigate in viscous fluid environments. In a similar manner, synthetic colloidal microswimmers are capable of mimicking complex biolocomotion by means of simple self-propulsion mechanisms. Although experimentally the speed of active particles can be controlled by e.g. self-generated chemical and thermal gradients, an in-situ change of swimming direction remains a challenge. In this work, we study self-propulsion of half-coated spherical colloids in critical binary mixtures and show that the coupling of local body forces, induced by laser illumination, and the wetting properties of the colloid, can be used to finely tune both the colloid's swimming speed and its directionality. We experimentally and numerically demonstrate that the direction of motion can be reversibly switched by means of the size and shape of the droplet(s) nucleated around the colloid, depending on the particle radius and the fluid's ambient temperature. Moreover, the aforementioned features enable the possibility to realize both negative and positive phototaxis in light intensity gradients. Our results can be extended to other types of half-coated microswimmers, provided that both of their hemispheres are selectively made active but with distinct physical properties.
TL;DR: The collective behavior of chemically propelled sphere-dimer motors made from linked catalytic and noncatalytic spheres in a quasi-two-dimensional confined geometry is studied using a coarse-grained microscopic dynamical model.
Abstract: The collective behavior of chemically propelled sphere-dimer motors made from linked catalytic and noncatalytic spheres in a quasi-two-dimensional confined geometry is studied using a coarse-grained microscopic dynamical model. Chemical reactions at the catalytic spheres that convert fuel to product generate forces that couple to solvent degrees of freedom as a consequence of momentum conservation in the microscopic dynamics. The collective behavior of the many-body system is influenced by direct intermolecular interactions among the motors, chemotactic effects due to chemical gradients, hydrodynamic coupling, and thermal noise. Segregation into high and low density phases and globally homogeneous states with strong fluctuations are investigated as functions of the motor characteristics. Factors contributing to this behavior are discussed in the context of active Brownian models.