scispace - formally typeset
Search or ask a question

Showing papers in "arXiv: Superconductivity in 2012"


Journal ArticleDOI
TL;DR: This review paper highlights recent advances in the condensed matter search for Majorana that have led many in the field to believe that this quest may soon bear fruit and discusses the most remarkable properties of condensed matter Majorana fermions-the non-Abelian exchange statistics that they generate and their associated potential for quantum computation.
Abstract: The 1937 theoretical discovery of Majorana fermions--whose defining property is that they are their own anti-particles--has since impacted diverse problems ranging from neutrino physics and dark matter searches to the fractional quantum Hall effect and superconductivity. Despite this long history the unambiguous observation of Majorana fermions nevertheless remains an outstanding goal. This review article highlights recent advances in the condensed matter search for Majorana that have led many in the field to believe that this quest may soon bear fruit. We begin by introducing in some detail exotic `topological' one- and two-dimensional superconductors that support Majorana fermions at their boundaries and at vortices. We then turn to one of the key insights that arose during the past few years; namely, that it is possible to `engineer' such exotic superconductors in the laboratory by forming appropriate heterostructures with ordinary s-wave superconductors. Numerous proposals of this type are discussed, based on diverse materials such as topological insulators, conventional semiconductors, ferromagnetic metals, and many others. The all-important question of how one experimentally detects Majorana fermions in these setups is then addressed. We focus on three classes of measurements that provide smoking-gun Majorana signatures: tunneling, Josephson effects, and interferometry. Finally, we discuss the most remarkable properties of condensed matter Majorana fermions--the non-Abelian exchange statistics that they generate and their associated potential for quantum computation.

1,515 citations


Journal ArticleDOI
TL;DR: In this article, a phase diagram in the single-layer FeSe films grown on SrTiO3 substrate by an annealing procedure to tune the charge carrier concentration over a wide range is presented.
Abstract: Superconductivity in the cuprate superconductors and the Fe-based superconductors is realized by doping the parent compound with charge carriers, or by application of high pressure, to suppress the antiferromagnetic state. Such a rich phase diagram is important in understanding superconductivity mechanism and other physics in the Cu- and Fe-based high temperature superconductors. In this paper, we report a phase diagram in the single-layer FeSe films grown on SrTiO3 substrate by an annealing procedure to tune the charge carrier concentration over a wide range. A dramatic change of the band structure and Fermi surface is observed, with two distinct phases identified that are competing during the annealing process. Superconductivity with a record high transition temperature (Tc) at ~65 K is realized by optimizing the annealing process. The wide tunability of the system across different phases, and its high-Tc, make the single-layer FeSe film ideal not only to investigate the superconductivity physics and mechanism, but also to study novel quantum phenomena and for potential applications.

548 citations


Journal ArticleDOI
TL;DR: The synthesis of Li(x)( NH(2))(y)(NH(3))(1-y)Fe(2)Se(2), with lithium ions, lithium amide and ammonia acting as the spacer layer between FeSe layers, which exhibits superconductivity at 43(1) K, higher than in any FeSe-derived compound reported so far.
Abstract: The recent discovery of high temperature superconductivity in a layered iron arsenide has led to an intensive search to optimize the superconducting properties of iron-based superconductors by changing the chemical composition of the spacer layer that is inserted between adjacent anionic iron arsenide layers. Until now, superconductivity has only been found in compounds with a cationic spacer layer consisting of metal ions: Li+, Na+, K+, Ba2+ or a PbO-type or perovskite-type oxide layer. Electronic doping is usually necessary to control the fine balance between antiferromagnetism and superconductivity. Superconductivity has also been reported in FeSe, which contains neutral layers similar in structure to those found in the iron arsenides but without the spacer layer. Here we demonstrate the synthesis of Lix(NH2)y(NH3)1-yFe2Se2 (x ~0.6 ; y ~ 0.2), with lithium ions, lithium amide and ammonia acting as the spacer layer, which exhibits superconductivity at 43(1) K, higher than in any FeSe-derived compound reported so far and four times higher at ambient pressure than the transition temperature, Tc, of the parent Fe1.01Se. We have determined the crystal structure using neutron powder diffraction and used magnetometry and muon-spin rotation data to determine the superconducting properties. This new synthetic route opens up the possibility of further exploitation of related molecular intercalations in this and other systems in order to greatly optimize the superconducting properties in this family.

300 citations


Journal ArticleDOI
TL;DR: In this paper, a series of superconductors with enhanced Tc=30~46 K can be obtained by intercalating metals, Li, Na, Ba, Sr, Ca, Yb, and Eu in between FeSe layers by the ammonothermal method.
Abstract: New iron selenide superconductors by intercalating smaller-sized alkali metals (Li, Na) and alkaline earths using high-temperature routes have been pursued ever since the discovery of superconductivity at about 30 K in KFe2Se2, but all have failed so far. Here we demonstrate that a series of superconductors with enhanced Tc=30~46 K can be obtained by intercalating metals, Li, Na, Ba, Sr, Ca, Yb, and Eu in between FeSe layers by the ammonothermal method at room temperature. Analysis on their powder X-ray diffraction patterns reveals that all the main phases can be indexed based on body-centered tetragonal lattices with a~3.755-3.831 A while c~15.99-20.54 A. Resistivities show the corresponding sharp transitions at 45 K and 39 K for NaFe2Se2 and Ba0.8Fe2Se2, respectively, confirming their bulk superconductivity. These findings provide a new starting point for studying the properties of these superconductors and an effective synthetic route for the exploration of new superconductors as well.

234 citations


Posted Content
TL;DR: In this paper, a superconducting parametric amplifier was proposed for the microwave frequency superconducted Josephson parametric amplifiers with high dynamic range and low nonlinearity, which can be applied to microwave, millimeter wave and sub-millimeter wave bands.
Abstract: Amplifiers are ubiquitous in electronics and play a fundamental role in a wide range of scientific measurements. From a user's perspective, an ideal amplifier has very low noise, operates over a broad frequency range, and has a high dynamic range - it is capable of handling strong signals with little distortion. Unfortunately, it is difficult to obtain all of these characteristics simultaneously. For example, modern transistor amplifiers offer multi-octave bandwidths and excellent dynamic range. However, their noise remains far above the fundamental limit set by the uncertainty principle of quantum mechanics. Parametric amplifiers, which predate transistor amplifiers and are widely used in optics, exploit a nonlinear response to transfer power from a strong pump tone to a weak signal. If the nonlinearity is purely reactive, ie. nondissipative, in theory the amplifier noise can reach the quantum-mechanical limit. Indeed, microwave frequency superconducting Josephson parametric amplifiers do approach the quantum limit, but generally are narrow band and have very limited dynamic range. In this paper, we describe a superconducting parametric amplifier that overcomes these limitations. The amplifier is very simple, consisting only of a patterned metal film on a dielectric substrate, and relies on the nonlinear kinetic inductance of a superconducting transmission line. We measure gain extending over 2 GHz on either side of an 11.56 GHz pump tone, and we place an upper limit on the added noise of the amplifier of 3.4 photons at 9.4 GHz. Furthermore, the dynamic range is very large, comparable to microwave transistor amplifiers, and the concept can be applied throughout the microwave, millimeter-wave and submillimeter-wave bands.

187 citations


Journal ArticleDOI
TL;DR: In this article, a simple introduction to the FeSC physics is given, and an opinion that all the complexity of FeSC properties is encapsulated in their electronic structure is advocated, which agrees reasonably well with the results of band structure calculations.
Abstract: Angle resolved photoemission spectroscopy (ARPES) reveals the features of the electronic structure of quasi-two-dimensional crystals, which are crucial for the formation of spin and charge ordering and determine the mechanisms of electron-electron interaction, including the superconducting pairing. The newly discovered iron based superconductors (FeSC) promise interesting physics that stems, on one hand, from a coexistence of superconductivity and magnetism and, on the other hand, from complex multi-band electronic structure. In this review I want to give a simple introduction to the FeSC physics, and to advocate an opinion that all the complexity of FeSC properties is encapsulated in their electronic structure. For many compounds, this structure was determined in numerous ARPES experiments and agrees reasonably well with the results of band structure calculations. Nevertheless, the existing small differences may help to understand the mechanisms of the magnetic ordering and superconducting pairing in FeSC.

166 citations


Journal ArticleDOI
TL;DR: A broad range of experiments on Sr(2)RuO(4) that are sensitive to p-wave pairing, triplet superconductivity and time-reversal symmetry breaking are reviewed and compared to each other and to theoretical predictions, finding the evidence for triplet pairing is strong, although some puzzles remain.
Abstract: Shortly after the discovery in 1994 of superconductivity in Sr2RuO4, it was proposed on theoretical grounds that the superconducting state may have chiral p-wave symmetry analogous to the A phase of superfluid He-3. Substantial experimental evidence has since accumulated in favor of this pairing symmetry, including several interesting recent results related to broken time reversal symmetry and vortices with half of the usual superconducting flux quantum. Great interest surrounds the possibility of chiral p-wave order in Sr2RuO4, since this state may exhibit topological order analogous to that of a quantum Hall state, and can support such exotic physics as Majorana fermions and non-Abelian winding statistics, which have been proposed as one route to a quantum computer. However, serious discrepancies remain in trying to connect the experimental results to theoretical predictions for chiral p-wave order. In this paper, I review a broad range of experiments on Sr2RuO4 that are sensitive to p-wave pairing, triplet superconductivity and time-reversal symmetry breaking and compare these experiments to each other and to theoretical predictions. In this context, the evidence for triplet pairing is strong, although some puzzles remain. The "smoking gun" experimental results for chiral p-wave, those which directly look for evidence of broken time-reversal symmetry in the superconducting state of Sr2RuO4, are most perplexing when the results are compared to each other and to theoretical predictions. Consequently, the case for chiral p-wave in Sr2RuO4 remains unresolved, suggesting the need to consider either significant modifications to the standard chiral p-wave models or possible alternative pairing symmetries. Recent ideas along these lines are discussed.

165 citations


Posted Content
TL;DR: In this article, the authors reported synthesis and superconductivity at 3.7K in PrO0.5F 0.5BiS2 using vacuum encapsulation technique at 7800C in single step.
Abstract: We report synthesis and superconductivity at 3.7K in PrO0.5F0.5BiS2. The newly discovered material belongs to the layered sulfide based REO0.5F0.5BiS2 compounds having ZrCuSiAs type structure. The bulk polycrystalline compound is synthesized by vacuum encapsulation technique at 7800C in single step. Detailed structural analysis has shown that the as synthesized PrO0.5F0.5BiS2 is crystallized in tetragonal P4/nmm space group with lattice parameters a = 4.015(5) {\AA}, c = 13.362(4) {\AA}. Bulk superconductivity is observed in PrO0.5F0.5BiS2 below 4K from magnetic and transport measurements. Electrical transport measurements showed superconducting transition temperature (Tc) onset at 3.7K and Tc ({\rho}=0) at 3.1K. Hump at Tc related to superconducting transition is not observed in heat capacity measurement and rather a Schottky-type anomaly is observed at below ~6K. The compound is slightly semiconducting in normal state. Isothermal magnetization (MH) exhibited typical type II behavior with lower critical field (Hc1) of around 8Oe.

127 citations


Journal ArticleDOI
TL;DR: In the first three years since the discovery of Fe-based high Tc superconductors, scanning tunneling microscopy (STM) and spectroscopy have shed light on three important questions as mentioned in this paper.
Abstract: In the first three years since the discovery of Fe-based high Tc superconductors, scanning tunneling microscopy (STM) and spectroscopy have shed light on three important questions. First, STM has demonstrated the complexity of the pairing symmetry in Fe-based materials. Phase-sensitive quasiparticle interference (QPI) imaging and low temperature spectroscopy have shown that the pairing order parameter varies from nodal to nodeless s\pm within a single family, FeTe1-xSex. Second, STM has imaged C4 -> C2 symmetry breaking in the electronic states of both parent and superconducting materials. As a local probe, STM is in a strong position to understand the interactions between these broken symmetry states and superconductivity. Finally, STM has been used to image the vortex state, giving insights into the technical problem of vortex pinning, and the fundamental problem of the competing states introduced when superconductivity is locally quenched by a magnetic field. Here we give a pedagogical introduction to STM and QPI imaging, discuss the specific challenges associated with extracting bulk properties from the study of surfaces, and report on progress made in understanding Fe-based superconductors using STM techniques.

124 citations


Journal ArticleDOI
TL;DR: In this paper, the authors employed few-cycle multi-terahertz pulses to probe the evolution of the spin-density-wave (SDW) gap of the pnictide compound BaFe2As2 following excitation with a femtosecond optical pulse.
Abstract: The interplay among charge, spin and lattice degrees of freedom in solids gives rise to intriguing macroscopic quantum phenomena such as colossal magnetoresistance, multiferroicity and high-temperature superconductivity. Strong coupling or competition between various orders in these systems presents the key to manipulate their functional properties by means of external perturbations such as electric and magnetic fields or pressure. Ultrashort and intense optical pulses have emerged as an interesting tool to investigate elementary dynamics and control material properties by melting an existing order. Here, we employ few-cycle multi-terahertz pulses to resonantly probe the evolution of the spin-density-wave (SDW) gap of the pnictide compound BaFe2As2 following excitation with a femtosecond optical pulse. When starting in the low-temperature ground state, optical excitation results in a melting of the SDW order, followed by ultrafast recovery. In contrast, the SDW gap is induced when we excite the normal state above the transition temperature. Very surprisingly, the transient ordering quasi-adiabatically follows a coherent lattice oscillation at a frequency as high as 5.5 THz. Our results attest to a pronounced spin-phonon coupling in pnictides that supports rapid development of a macroscopic order on small vibrational displacement even without breaking the symmetry of the crystal.

120 citations


Journal ArticleDOI
TL;DR: In this paper, a fast Magnetic Josephson Junction (MJJ) was developed for a scalable high-density cryogenic memory compatible in speed and fabrication with energy-efficient Single Flux Quantum (SFQ) circuits.
Abstract: We develop a fast Magnetic Josephson Junction (MJJ) - a superconducting ferromagnetic device for a scalable high-density cryogenic memory compatible in speed and fabrication with energy-efficient Single Flux Quantum (SFQ) circuits. We present experimental results for Superconductor-Insulator-Ferromagnet-Superconductor (SIFS) MJJs with high characteristic voltage IcRn of >700 uV proving their applicability for superconducting circuits. By applying magnetic field pulses, the device can be switched between MJJ logic states. The MJJ IcRn product is only ~30% lower than that of conventional junction co-produced in the same process, allowing for integration of MJJ-based and SIS-based ultra-fast digital SFQ circuits operating at tens of gigahertz.

Journal ArticleDOI
TL;DR: In this article, the authors employed the Nernst effect on tiny bulk Fermi surfaces and showed that the most dilute superconductor has a metallic normal state with a FermI energy as little as 1.1 meV on top of a band gap as large as 3 eV.
Abstract: The origin of superconductivity in bulk SrTiO$_{3}$ is a mystery, since the non-monotonous variation of the critical transition with carrier concentration defies the expectations of the crudest version of the BCS theory. Here, employing the Nernst effect, an extremely sensitive probe of tiny bulk Fermi surfaces, we show that down to concentrations as low as $5.5 \times 10^{17}cm^{-3}$, the system has both a sharp Fermi surface and a superconducting ground state. The most dilute superconductor currently known has therefore a metallic normal state with a Fermi energy as little as 1.1 meV on top of a band gap as large as 3 eV. Occurrence of a superconducting instability in an extremely small, single-component and barely anisotropic Fermi surface implies strong constraints for the identification of the pairing mechanism.

Journal ArticleDOI
TL;DR: In this article, the authors reported the appearance of superconductivity at 5K in NdO0.5F 0.5BiS2 and supplement the discovery of the same in layered sulfide based ZrCuSiAs type compounds.
Abstract: We report appearance of superconductivity at 5K in NdO0.5F0.5BiS2 and supplement the discovery [1] of the same in layered sulfide based ZrCuSiAs type compounds. The bulk polycrystalline compound is synthesized by conventional solid state route via vacuum encapsulation technique. Detailed structural analysis showed that the studied compound is crystallized in tetragonal P4/nmm space group with lattice parameters a = 3.9911(3) {\AA}, c = 13.3830(2) {\AA}. Bulk superconductivity is established in NdO0.5F0.5BiS2 at 5K by both transport and magnetic measurements. Electrical transport measurements showed superconducting Tc onset at 5.2K and Tc ({\rho}=0) at 4.7K. Under applied magnetic field both Tc onset and Tc ({\rho} =0) decrease to lower temperatures and an upper critical field [Hc2(0)] of above 23kOe is estimated. Both AC and DC magnetic susceptibility measurements showed bulk superconductivity below 5K. Isothermal magnetization (MH) exhibited typical type II behavior with lower critical field (Hc1) of around 15Oe. Isothermal magnetization (MH) exhibited typical type-II behavior with lower critical field (Hc1) of around 15Oe. Specific heat [Cp(T)] is investigated in the temperature range of 1.9-50K in zero external magnetic field. A Schottky-type anomaly is observed at low temperature below 7K. This low temperature Schottky can be attributed to the change in the entropy of the system.

Journal ArticleDOI
TL;DR: Using the density-functional perturbation theory with structural optimization, this paper investigated the electronic structure, phonon spectra, and superconductivity of BiS2-based layered compounds LaO1-xFxBiS2.
Abstract: Using the density-functional perturbation theory with structural optimization, we investigate the electronic structure, phonon spectra, and superconductivity of BiS2-based layered compounds LaO1-xFxBiS2. For LaO0.5F0.5BiS2, the calculated electron-phonon coupling constant is equal to lambda = 0.8, and obtained Tc = 9.1 K is very close to its experimental value, indicating that it is a conventional electron-phonon superconductor.

Journal ArticleDOI
TL;DR: In this article, single-photon counting at 1550 nm with titanium-nitride (TiN) microwave kinetic inductance detectors was shown to follow Poisson statistics with energy resolution of 0.4 eV and arrival time resolution of 1.2 microseconds.
Abstract: We demonstrate single-photon counting at 1550 nm with titanium-nitride (TiN) microwave kinetic inductance detectors. Energy resolution of 0.4 eV and arrival-time resolution of 1.2 microseconds are achieved. 0-, 1-, 2-photon events are resolved and shown to follow Poisson statistics. We find that the temperature-dependent frequency shift deviates from the Mattis-Bardeen theory, and the dissipation response shows a shorter decay time than the frequency response at low temperatures. We suggest that the observed anomalous electrodynamics may be related to quasiparticle traps or subgap states in the disordered TiN films. Finally, the electron density-of-states is derived from the pulse response.

Journal ArticleDOI
TL;DR: In this paper, it was shown that the breaking of Ir-Ir bonds that occurs in Ir1-xPtxTe2 results in the appearance of a structural critical point in the T = 0 limit at xc = 0.035.
Abstract: IrTe2, a layered compound with a triangular iridium lattice, exhibits a structural phase transition at approximately 250 K. This transition is characterized by the formation of Ir-Ir bonds along the b-axis. We found that the breaking of Ir-Ir bonds that occurs in Ir1-xPtxTe2 results in the appearance of a structural critical point in the T = 0 limit at xc = 0.035. Although both IrTe2 and PtTe2 are paramagnetic metals, superconductivity at Tc = 3.1 K is induced by the bond breaking in a narrow range of x > xc in Ir1-xPtxTe2. This result indicates that structural fluctuations can be involved in the emergence of superconductivity.

Journal ArticleDOI
TL;DR: In this paper, the surface-dominated loss hypothesis was tested by systematically studying the role of geometrical parameters on the internal quality factors of compact resonators patterned in Nb on sapphire.
Abstract: Applications in quantum information processing and photon detectors are stimulating a race to produce the highest possible quality factor on-chip superconducting microwave resonators. We have tested the surface-dominated loss hypothesis by systematically studying the role of geometrical parameters on the internal quality factors of compact resonators patterned in Nb on sapphire. Their single-photon internal quality factors were found to increase with the distance between capacitor fingers, the width of the capacitor fingers, and the impedance of the resonator. Quality factors were improved from 210,000 to 500,000 at T = 200 mK. All of these results are consistent with our starting hypothesis.

Journal ArticleDOI
TL;DR: The superconducting properties of these new hybride materials appear not to be influenced by the presence of electronically-innocent Li(NH2) salt moieties as discussed by the authors.
Abstract: Following a recent proposal by Burrard-Lucas et al. [unpublished, arXiv: 1203.5046] we intercalated FeSe by Li in liquid ammonia. We report on the synthesis of new LixFe2Se2(NH3)y phases as well as on their magnetic and superconducting properties. We suggest that the superconducting properties of these new hybride materials appear not to be influenced by the presence of electronically-innocent Li(NH2) salt moieties. Indeed, high onset temperatures of 44 K and shielding fractions of almost 80% were only obtained in samples containing exclusively Lix(NH3)y moieties acting simultaneously as electron donors and spacer units. The c-axis of the new intercalated phases is strongly enhanced when compared to the alkali-metal intercalated iron selenides A1-xFe2-ySe2 with A = K, Rb, Cs, Tl with T c = 32 K.

Journal ArticleDOI
TL;DR: In this paper, a phase diagram of the LaO1-xFxBiS2 was established and a wide F-concentration range of x = 0.2 ~ 0.7 was established.
Abstract: Novel BiS2-based superconductors LaO1-xFxBiS2 prepared by the high pressure synthesis technique were systematically studied. It was found that the high pressure annealing strongly the lattice as compared to the LaO1-xFxBiS2 samples prepared by conventional solid state reaction at ambient pressure. Bulk superconductivity was observed within a wide F-concentration range of x = 0.2 ~ 0.7. On the basis of those results, we have established a phase diagram of LaO1-xFxBiS2.

Journal ArticleDOI
TL;DR: In this paper, angle-resolved photoemission spectroscopy (ARPES) studies of high-temperature cuprate superconductors aiming at elucidating the relationship between the superconductivity, the pseudogap, and the Fermi arc are presented.
Abstract: We present an overview of angle-resolved photoemission spectroscopy (ARPES) studies of high-temperature cuprate superconductors aiming at elucidating the relationship between the superconductivity, the pseudogap, and the Fermi arc. ARPES studies of underdoped samples show a momentum dependence of the energy gap below Tc which deviates from a simple d-wave form, suggesting the coexistence of multiple energy scales in the superconducting state. Hence, two distinct energy scales have been introduced, namely, the gap near the node (characterized by Delta_0) and in the anti-nodal region (characterized by Delta^*). Dichotomy between them has been demonstrated from the material, doping, and temperature dependence of the energy gap. While Delta^* at the same doping level is approximately material independent, Delta_0 shows a strong material dependence tracking the magnitude of Tc,max. The anti-nodal gap does not close at Tc in contrast to the gap near the node which follows something closer to a BCS-like temperature dependence. An effective superconducting gap Delta_sc defined at the end point of the Fermi arc is found to be proportional to Tc's in various materials.

Journal ArticleDOI
TL;DR: The first experimental demonstration of single flux quantum logic, eSFQ, was reported in this article. But the authors did not report the performance metrics of the eSFLQ circuits.
Abstract: We report the first experimental demonstration of recently proposed energy-efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic eliminating dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ~0.8 aJ per bit operation. Two types of demonstration eSFQ circuits, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA/cm2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

Journal ArticleDOI
TL;DR: In this article, a trapped field of over 3 T has been measured at 17.5 K in a magnetized stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm.
Abstract: A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data using the Biot-Savart law is consistent with the measured local critical current density. From this we conclude that critical current density, and therefore trapped field performance, is limited by the flux pinning available in MgB2, rather than by lack of connectivity. This suggests strongly that both increasing sample size and enhancing pinning through doping will allow further increases in trapped field performance of bulk MgB2.

Journal ArticleDOI
TL;DR: In this article, the transport properties of a few hundreds of nanometers thick (in the graphene plane direction) lamellae of highly oriented pyrolytic graphite (HOPG) have been investigated.
Abstract: Transport properties of a few hundreds of nanometers thick (in the graphene plane direction) lamellae of highly oriented pyrolytic graphite (HOPG) have been investigated. Current-Voltage characteristics as well as the temperature dependence of the voltage at different fixed input currents provide evidence for Josephson-coupled superconducting regions embedded in the internal two-dimensional interfaces, reaching zero resistance at low enough temperatures. The overall behavior indicates the existence of superconducting regions with critical temperatures above 100 K at the internal interfaces of oriented pyrolytic graphite.

Journal ArticleDOI
TL;DR: In this article, the structural and physical properties of layered chalcogenide superconductors are summarized and a new BiS2-based layered superconductor is introduced.
Abstract: Structural and physical properties of layered chalcogenide superconductors are summarized. In particular, we review the remarkable properties of the Fe-chalcogenide superconductors, FeSe and FeTe-based materials. Furthermore, we introduce the recently-discovered new BiS2-based layered superconductors and discuss its prospects.

Journal ArticleDOI
TL;DR: In this paper, a new iron selenide superconductor with a TC onset of 45K and nominal composition Lix(C5H5N)yFe2-zSe2, synthesized via intercalation of dissolved alkaline metal in anhydrous pyridine at room temperature, was reported.
Abstract: We report on a new iron selenide superconductor with a TC onset of 45K and the nominal composition Lix(C5H5N)yFe2-zSe2, synthesized via intercalation of dissolved alkaline metal in anhydrous pyridine at room temperature. This superconductor exhibits a broad transition, reaching zero resistance at 10K. Magnetization measurements reveal a superconducting shielding fraction of approximately 30%. Analogous phases intercalated with Na, K and Rb were also synthesized and characterized. The superconducting transition temperature of Lix(C5H5N)yFe2-zSe2 is clearly enhanced in comparison to the known superconductors FeSe0.98 (Tc ~ 8K) and AxFe2-ySe2 (TC ~ 27-32K) and is in close agreement with critical temperatures recently reported for Lix(NH3)yFe2-zSe2. Post-annealing of intercalated material (Lix(C5H5N)yFe2-zSe2) at elevated temperatures drastically enlarges the c-parameter of the unit cell (~44%) and increases the amount of superconducting shielding fraction to nearly 100%. Our findings indicate a new synthesis road leading to possibly even higher critical temperatures in this class of materials by intercalation of organic compounds between Fe-Se layers.

Journal ArticleDOI
TL;DR: In this article, the authors investigated the correlation between the microwave loss and patterning method for coplanar waveguide titanium nitride resonators fabricated on Si wafers and found that the silicon surface exhibits a higher loss when chlorine-etched than when fluorine-ecked.
Abstract: We have investigated the correlation between the microwave loss and patterning method for coplanar waveguide titanium nitride resonators fabricated on Si wafers. Three different methods were investigated: fluorine- and chlorine-based reactive ion etches and an argon-ion mill. At high microwave probe powers the reactive etched resonators showed low internal loss, whereas the ion-milled samples showed dramatically higher loss. At single-photon powers we found that the fluorine-etched resonators exhibited substantially lower loss than the chlorine-etched ones. We interpret the results by use of numerically calculated filling factors and find that the silicon surface exhibits a higher loss when chlorine-etched than when fluorine-etched. We also find from microscopy that re-deposition of silicon onto the photoresist and side walls is the probable cause for the high loss observed for the ion-milled resonators

Journal ArticleDOI
TL;DR: First principle calculations are in agreement with experimental results and show that SrFBiS2 is very similar to LaOBiS2, which becomes a superconductor with F doping, therefore, SrF biS2 may be a parent compound of new superconductors.
Abstract: We have synthesized a new layered BiS$_{2}$-based compound SrFBiS2. This compound has similar structure to BiS2. It is built up by stacking up SrF layers and NaCl-type BiS2 layers alternatively along the c axis. Electric transport measurement indicates that SrFBiS2 is a semiconductor. Thermal transport measurement shows that SrFBiS2 has a small thermal conductivity and large Seebeck coefficient. First principle calculations are in agreement with experimental results and show that SrFBiS2 is very similar to LaOBiS2 which becomes superconductor with F doping. Therefore, SrFBiS2 may be a parent compound of new superconductors.

Journal ArticleDOI
TL;DR: In this paper, it was shown that the local temperature rise is the origin of the synchronization of the phase kink for terahertz radiation in the mesa structures of Bi$2$Sr$_2$CaCu$_ 2$O$8+\delta.
Abstract: Terahertz radiation from the mesa structures of Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$ is detected in samples with thin electrodes $< 100$ nm. In samples with thick electrodes $\simeq$ 400 nm, neither radiations nor voltage jumps in current-voltage characteristics are detected. This suggests that the thin electrode helps excite the Josephson plasma oscillation as a result of the poor heat flow through the electrode. The shielding effect by the electrode is not essential. We consider that the local temperature rise is the origin of the synchronization of the phase kink for terahertz radiation.

Journal ArticleDOI
TL;DR: In this paper, the intrinsic phase diagram of antiferromagnetism (AFM) and high-temperature superconductivity (HTSC) for a disorder-free CuO2 plane with hole carriers was uncovered.
Abstract: High-temperature superconductivity (HTSC) in copper oxides emerges on a layered CuO2 plane when an antiferromagnetic Mott insulator is doped with mobile hole carriers. We review extensive studies of multilayered copper oxides by site-selective nuclear magnetic resonance (NMR), which have uncovered the intrinsic phase diagram of antiferromagnetism (AFM) and HTSC for a disorder-free CuO2 plane with hole carriers. We present our experimental findings such as the existence of the AFM metallic state in doped Mott insulators, the uniformly mixed phase of AFM and HTSC, and the emergence of d-wave SC with a maximum Tc just outside a critical carrier density, at which the AFM moment on a CuO2 plane disappears. These results can be accounted for by the Mott physics based on the t-J model. The superexchange interaction J_in among spins plays a vital role as a glue for Cooper pairs or mobile spin-singlet pairs, in contrast to the phonon-mediated attractive interaction among electrons established in the Bardeen-Cooper-Schrieffer (BCS) theory. We remark that the attractive interaction for raising the $T_c$ of HTSC up to temperatures as high as 160 K is the large J_in (~0.12 eV), which binds electrons of opposite spins to be on neighboring sites, and that there are no bosonic glues. It is the Coulomb repulsive interaction U(> 6 eV) among Cu-3d electrons that plays a central role in the physics behind high-Tc phenomena. A new paradigm of the SC mechanism opens to strongly correlated electron matter.

Journal ArticleDOI
TL;DR: In this article, the authors compared different methods to induce superconductivity in iron chalcogenide Fe1+yTe0.6Se0.4 including annealing in vacuum, N2, O2, I2 atmosphere, and immersing samples into acid and alcoholic beverages.
Abstract: We have systematically investigated and compared different methods to induce superconductivity in iron chalcogenide Fe1+yTe0.6Se0.4 including annealing in vacuum, N2, O2, I2 atmosphere, and immersing samples into acid and alcoholic beverages. Vacuum and N2 annealing are proved to be ineffective to induce superconductivity in Fe1+yTe0.6Se0.4 single crystal. O2 and I2 annealing, acid and alcoholic beverages can induce superconductivity by oxidizing the excess Fe in the sample. Superconductivity in O2 annealed sample is in bulk nature, while I2, acid and alcoholic beverages can only induce superconductivity near the surface. By comparing different effects of O2, I2, acid and alcoholic beverages, we propose a scenario to explain how the superconductivity is induced in the non-superconducting as-grown Fe1+yTe0.6Se0.4.