Showing papers in "Chemical Society Reviews in 2013"

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes

Abstract: Over the past few decades, researchers have established artificial enzymes as highly stable and low-cost alternatives to natural enzymes in a wide range of applications. A variety of materials including cyclodextrins, metal complexes, porphyrins, polymers, dendrimers and biomolecules have been extensively explored to mimic the structures and functions of naturally occurring enzymes. Recently, some nanomaterials have been found to exhibit unexpected enzyme-like activities, and great advances have been made in this area due to the tremendous progress in nano-research and the unique characteristics of nanomaterials. To highlight the progress in the field of nanomaterial-based artificial enzymes (nanozymes), this review discusses various nanomaterials that have been explored to mimic different kinds of enzymes. We cover their kinetics, mechanisms and applications in numerous fields, from biosensing and immunoassays, to stem cell growth and pollutant removal. We also summarize several approaches to tune the activities of nanozymes. Finally, we make comparisons between nanozymes and other catalytic materials (other artificial enzymes, natural enzymes, organic catalysts and nanomaterial-based catalysts) and address the current challenges and future directions (302 references).

Covalent organic frameworks (COFs): from design to applications

Abstract: Covalent organic frameworks (COFs) represent an exciting new type of porous organic materials, which are ingeniously constructed with organic building units via strong covalent bonds. The well-defined crystalline porous structures together with tailored functionalities have offered the COF materials superior potential in diverse applications, such as gas storage, adsorption, optoelectricity, and catalysis. Since the seminal work of Yaghi and co-workers in 2005, the rapid development in this research area has attracted intensive interest from researchers with diverse expertise. This critical review describes the state-of-the-art development in the design, synthesis, characterisation, and application of the crystalline porous COF materials. Our own opinions on further development of the COF materials are also presented for discussion (155 references).

Enzyme immobilisation in biocatalysis : Why, what and how

Abstract: In this tutorial review, an overview of the why, what and how of enzyme immobilisation for use in biocatalysis is presented. The importance of biocatalysis in the context of green and sustainable chemicals manufacture is discussed and the necessity for immobilisation of enzymes as a key enabling technology for practical and commercial viability is emphasised. The underlying reasons for immobilisation are the need to improve the stability and recyclability of the biocatalyst compared to the free enzyme. The lower risk of product contamination with enzyme residues and low or no allergenicity are further advantages of immobilised enzymes. Methods for immobilisation are divided into three categories: adsorption on a carrier (support), encapsulation in a carrier, and cross-linking (carrier-free). General considerations regarding immobilisation, regardless of the method used, are immobilisation yield, immobilisation efficiency, activity recovery, enzyme loading (wt% in the biocatalyst) and the physical properties, e.g. particle size and density, hydrophobicity and mechanical robustness of the immobilisate, i.e. the immobilised enzyme as a whole (enzyme + support). The choice of immobilisate is also strongly dependent on the reactor configuration used, e.g. stirred tank, fixed bed, fluidised bed, and the mode of downstream processing. Emphasis is placed on relatively recent developments, such as the use of novel supports such as mesoporous silicas, hydrogels, and smart polymers, and cross-linked enzyme aggregates (CLEAs).

Inorganic nanostructures for photoelectrochemical and photocatalytic water splitting

Abstract: The increasing human need for clean and renewable energy has stimulated research in artificial photosynthesis, and in particular water photoelectrolysis as a pathway to hydrogen fuel. Nanostructured devices are widely regarded as an opportunity to improve efficiency and lower costs, but as a detailed analysis shows, they also have considerably disadvantages. This article reviews the current state of research on nanoscale-enhanced photoelectrodes and photocatalysts for the water splitting reaction. The focus is on transition metal oxides with special emphasis of Fe2O3, but nitrides and chalcogenides, and main group element compounds, including carbon nitride and silicon, are also covered. The effects of nanostructuring on carrier generation and collection, multiple exciton generation, and quantum confinement are also discussed, as well as implications of particle size on surface recombination, on the size of space charge layers and on the possibility of controlling nanostructure energetics via potential determining ions. After a summary of electrocatalytic and plasmonic nanostructures, the review concludes with an outlook on the challenges in solar fuel generation with nanoscale inorganic materials.

Metal dichalcogenide nanosheets: preparation, properties and applications

Abstract: Two-dimensional (2D) nanomaterials have received much attention in recent years, because of their unusual properties associated with their ultra-thin thickness and 2D morphology. Besides graphene which has aroused tremendous research interest, other types of 2D nanomaterials such as metal dichalcogenides have also been studied and applied in various applications including electronics, optoelectronics, energy storage devices, and so on. In this tutorial review, we will take MoS2 as a typical example to introduce the latest research development of 2D inorganic nanomaterials with emphasis on their preparation methods, properties and applications.

Nanostructured sulfur cathodes

Abstract: Rechargeable Li/S batteries have attracted significant attention lately due to their high specific energy and low cost. They are promising candidates for applications, including portable electronics, electric vehicles and grid-level energy storage. However, poor cycle life and low power capability are major technical obstacles. Various nanostructured sulfur cathodes have been developed to address these issues, as they provide greater resistance to pulverization, faster reaction kinetics and better trapping of soluble polysulfides. In this review, recent developments on nanostructured sulfur cathodes and mechanisms behind their operation are presented and discussed. Moreover, progress on novel characterization of sulfur cathodes is also summarized, as it has deepened the understanding of sulfur cathodes and will guide further rational design of sulfur electrodes.

BODIPY dyes in photodynamic therapy.

Abstract: BODIPY dyes tend to be highly fluorescent, but their emissions can be attenuated by adding substituents with appropriate oxidation potentials. Substituents like these have electrons to feed into photoexcited BODIPYs, quenching their fluorescence, thereby generating relatively long-lived triplet states. Singlet oxygen is formed when these triplet states interact with 3O2. In tissues, this causes cell damage in regions that are illuminated, and this is the basis of photodynamic therapy (PDT). The PDT agents that are currently approved for clinical use do not feature BODIPYs, but there are many reasons to believe that this situation will change. This review summarizes the attributes of BODIPY dyes for PDT, and in some related areas.

Far-red to near infrared analyte-responsive fluorescent probes based on organic fluorophore platforms for fluorescence imaging

Abstract: The long wavelength (far-red to NIR) analyte-responsive fluorescent probes are advantageous for in vivo bioimaging because of minimum photo-damage to biological samples, deep tissue penetration, and minimum interference from background auto-fluorescence by biomolecules in the living systems. Thus, great interest in the development of new long wavelength analyte-responsive fluorescent probes has emerged in recent years. This review highlights the advances in the development of far-red to NIR fluorescent probes since 2000, and the probes are classified according to their organic dye platforms into various categories, including cyanines, rhodamine analogues, BODIPYs, squaraines, and other types (240 references).

Gold nanorods and their plasmonic properties

Abstract: Gold nanorods have been receiving extensive attention owing to their extremely attractive applications in biomedical technologies, plasmon-enhanced spectroscopies, and optical and optoelectronic devices. The growth methods and plasmonic properties of Au nanorods have therefore been intensively studied. In this review, we present a comprehensive overview of the flourishing field of Au nanorods in the past five years. We will focus mainly on the approaches for the growth, shape and size tuning, functionalization, and assembly of Au nanorods, as well as the methods for the preparation of their hybrid structures. The plasmonic properties and the associated applications of Au nanorods will also be discussed in detail.

Modifying enzyme activity and selectivity by immobilization.

Abstract: Immobilization of enzymes may produce alterations in their observed activity, specificity or selectivity. Although in many cases an impoverishment of the enzyme properties is observed upon immobilization (caused by the distortion of the enzyme due to the interaction with the support) in some instances such properties may be enhanced by this immobilization. These alterations in enzyme properties are sometimes associated with changes in the enzyme structure. Occasionally, these variations will be positive. For example, they may be related to the stabilization of a hyperactivated form of the enzyme, like in the case of lipases immobilized on hydrophobic supports via interfacial activation. In some other instances, these improvements will be just a consequence of random modifications in the enzyme properties that in some reactions will be positive while in others may be negative. For this reason, the preparation of a library of biocatalysts as broad as possible may be a key turning point to find an immobilized biocatalyst with improved properties when compared to the free enzyme. Immobilized enzymes will be dispersed on the support surface and aggregation will no longer be possible, while the free enzyme may suffer aggregation, which greatly decreases enzyme activity. Moreover, enzyme rigidification may lead to preservation of the enzyme properties under drastic conditions in which the enzyme tends to become distorted thus decreasing its activity. Furthermore, immobilization of enzymes on a support, mainly on a porous support, may in many cases also have a positive impact on the observed enzyme behavior, not really related to structural changes. For example, the promotion of diffusional problems (e.g., pH gradients, substrate or product gradients), partition (towards or away from the enzyme environment, for substrate or products), or the blocking of some areas (e.g., reducing inhibitions) may greatly improve enzyme performance. Thus, in this tutorial review, we will try to list and explain some of the main reasons that may produce an improvement in enzyme activity, specificity or selectivity, either real or apparent, due to immobilization.

Enhancing solar cell efficiency: the search for luminescent materials as spectral converters

Abstract: Photovoltaic (PV) technologies for solar energy conversion represent promising routes to green and renewable energy generation. Despite relevant PV technologies being available for more than half a century, the production of solar energy remains costly, largely owing to low power conversion efficiencies of solar cells. The main difficulty in improving the efficiency of PV energy conversion lies in the spectral mismatch between the energy distribution of photons in the incident solar spectrum and the bandgap of a semiconductor material. In recent years, luminescent materials, which are capable of converting a broad spectrum of light into photons of a particular wavelength, have been synthesized and used to minimize the losses in the solar-cell-based energy conversion process. In this review, we will survey recent progress in the development of spectral converters, with a particular emphasis on lanthanide-based upconversion, quantum-cutting and down-shifting materials, for PV applications. In addition, we will also present technical challenges that arise in developing cost-effective high-performance solar cells based on these luminescent materials.

Nano-graphene in biomedicine: theranostic applications

Abstract: Owing to their unique physical and chemical properties, graphene and its derivatives such as graphene oxide (GO), reduced graphene oxide (RGO) and GO-nanocomposites have attracted tremendous interest in many different fields including biomedicine in recent years. With every atom exposed on its surface, single-layered graphene shows ultra-high surface area available for efficient molecular loading and bioconjugation, and has been widely explored as novel nano-carriers for drug and gene delivery. Utilizing the intrinsic near-infrared (NIR) optical absorbance, in vivo graphene-based photothermal therapy has been realized, achieving excellent anti-tumor therapeutic efficacy in animal experiments. A variety of inorganic nanoparticles can be grown on the surface of nano-graphene, obtaining functional graphene-based nanocomposites with interesting optical and magnetic properties useful for multi-modal imaging and imaging-guided cancer therapy. Moreover, significant efforts have also been devoted to study the behaviors and toxicology of functionalized nano-graphene in animals. It has been uncovered that both surface chemistry and sizes play key roles in controlling the biodistribution, excretion, and toxicity of nano-graphene. Biocompatibly coated nano-graphene with ultra-small sizes can be cleared out from body after systemic administration, without rendering noticeable toxicity to the treated mice. In this review article, we will summarize the latest progress in this rapidly growing field, and discuss future prospects and challenges of using graphene-based materials for theranostic applications.

Conjugated microporous polymers: design, synthesis and application

Abstract: Conjugated microporous polymers (CMPs) are a class of organic porous polymers that combine π-conjugated skeletons with permanent nanopores, in sharp contrast to other porous materials that are not π-conjugated and with conventional conjugated polymers that are nonporous. As an emerging material platform, CMPs offer a high flexibility for the molecular design of conjugated skeletons and nanopores. Various chemical reactions, building blocks and synthetic methods have been developed and a broad variety of CMPs with different structures and specific properties have been synthesized, driving the rapid growth of the field. CMPs are unique in that they allow the complementary utilization of π-conjugated skeletons and nanopores for functional exploration; they have shown great potential for challenging energy and environmental issues, as exemplified by their excellent performance in gas adsorption, heterogeneous catalysis, light emitting, light harvesting and electrical energy storage. This review describes the molecular design principles of CMPs, advancements in synthetic and structural studies and the frontiers of functional exploration and potential applications.

Nanostructured metal chalcogenides: synthesis, modification, and applications in energy conversion and storage devices

Abstract: Advanced energy conversion and storage (ECS) devices (including fuel cells, photoelectrochemical water splitting cells, solar cells, Li-ion batteries and supercapacitors) are expected to play a major role in the development of sustainable technologies that alleviate the energy and environmental challenges we are currently facing. The successful utilization of ECS devices depends critically on synthesizing new nanomaterials with merits of low cost, high efficiency, and outstanding properties. Recent progress has demonstrated that nanostructured metal chalcogenides (MCs) are very promising candidates for efficient ECS systems based on their unique physical and chemical properties, such as conductivity, mechanical and thermal stability and cyclability. In this review, we aim to provide a summary on the liquid-phase synthesis, modifications, and energy-related applications of nanostructured metal chalcogenide (MC) materials. The liquid-phase syntheses of various MC nanomaterials are primarily categorized with the preparation method (mainly 15 kinds of methods). To obtain optimized, enhanced or even new properties, the nanostructured MC materials can be modified by other functional nanomaterials such as carbon-based materials, noble metals, metal oxides, or MCs themselves. Thus, this review will then be focused on the recent strategies used to realize the modifications of MC nanomaterials. After that, the ECS applications of the MC/modified-MC nanomaterials have been systematically summarized based on a great number of successful cases. Moreover, remarks on the challenges and perspectives for future MC research are proposed (403 references).

Catalysis of the electrochemical reduction of carbon dioxide

Abstract: The direct and catalyzed electrochemistry of CO2 partake in the contemporary attempts to reduce this inert molecule to fuels by means of solar energy, either directly, after conversion of light to electricity, or indirectly in that all elements of comprehension derived from electrochemical experiments can be used in the design and interpretation of photochemical experiments. Following reviews of the activity in the field until 2007–2008, the present review reports more recent findings even if their interpretation remains uncertain. It also develops useful notions that allow analyzing and comparing more rigorously the performances of existing catalysts when the necessary data are available. Among the general trends that transpire presently and are likely to be the object of active future work emphasis is put on the favorable role of acid addition in homogeneous catalytic systems and on the crucial chemical role of the electrode material in heterogeneous catalysis.

The calculations of excited-state properties with Time-Dependent Density Functional Theory

Abstract: In this tutorial review, we show how Time-Dependent Density Functional Theory (TD-DFT) has become a popular tool for computing the signatures of electronically excited states, and more specifically, the properties directly related to the optical (absorption and emission) spectra of molecules. We discuss the properties that can be obtained with widely available programs as well as how to account for the environmental effects (solvent and surfaces) and present recent applications in these fields. We next expose the transformation of the TD-DFT results into chemically intuitive parameters (colours as well as charge-transfer distances). Eventually, the non-specialised reader will find a series of advices and warnings necessary to perform her/his first TD-DFT calculations.

Luminescent probes and sensors for temperature.

Abstract: Temperature (T) is probably the most fundamental parameter in all kinds of science. Respective sensors are widely used in daily life. Besides conventional thermometers, optical sensors are considered to be attractive alternatives for sensing and on-line monitoring of T. This Review article focuses on all kinds of luminescent probes and sensors for measurement of T, and summarizes the recent progress in their design and application formats. The introduction covers the importance of optical probes for T, the origin of their T-dependent spectra, and the various detection modes. This is followed by a survey on (a) molecular probes, (b) nanomaterials, and (c) bulk materials for sensing T. This section will be completed by a discussion of (d) polymeric matrices for immobilizing T-sensitive probes and (e) an overview of the various application formats of T-sensors. The review ends with a discussion on the prospects, challenges, and new directions in the design of optical T-sensitive probes and sensors.

Porphyrin-sensitized solar cells

Abstract: Nature has chosen chlorophylls in plants as antennae to harvest light for the conversion of solar energy in complicated photosynthetic processes. Inspired by natural photosynthesis, scientists utilized artificial chlorophylls – the porphyrins – as efficient centres to harvest light for solar cells sensitized with a porphyrin (PSSC). After the first example appeared in 1993 of a porphyrin of type copper chlorophyll as a photosensitizer for PSSC that achieved a power conversion efficiency of 2.6%, no significant advance of PSSC was reported until 2005; beta-linked zinc porphyrins were then reported to show promising device performances with a benchmark efficiency of 7.1% reported in 2007. Meso-linked zinc porphyrin sensitizers in the first series with a push–pull framework appeared in 2009; the best cell performed comparably to that of a N3-based device, and a benchmark 11% was reported for a porphyrin sensitizer of this type in 2010. With a structural design involving long alkoxyl chains to envelop the porphyrin core to suppress the dye aggregation for a push–pull zinc porphyrin, the PSSC achieved a record 12.3% in 2011 with co-sensitization of an organic dye and a cobalt-based electrolyte. The best PSSC system exhibited a panchromatic feature for light harvesting covering the visible spectral region to 700 nm, giving opportunities to many other porphyrins, such as fused and dimeric porphyrins, with near-infrared absorption spectral features, together with the approach of molecular co-sensitization, to enhance the device performance of PSSC. According to this historical trend for the development of prospective porphyrin sensitizers used in PSSC, we review systematically the progress of porphyrins of varied kinds, and their derivatives, applied in PSSC with a focus on reports during 2007–2012 from the point of view of molecular design correlated with photovoltaic performance.

Synthesis of mesoporous silica nanoparticles

Abstract: Good control of the morphology, particle size, uniformity and dispersity of mesoporous silica nanoparticles (MSNs) is of increasing importance to their use in catalyst, adsorption, polymer filler, optical devices, bio-imaging, drug delivery, and biomedical applications. This review discusses different synthesis methodologies to prepare well-dispersed MSNs and hollow silica nanoparticles (HSNs) with tunable dimensions ranging from a few to hundreds of nanometers of different mesostructures. The methods include fast self-assembly, soft and hard templating, a modified Stober method, dissolving–reconstruction and modified aerogel approaches. In practical applications, the MSNs prepared by these methods demonstrate good potential for use in high-performance catalysis, antireflection coating, transparent polymer–MSNs nanocomposites, drug-release and theranostic systems.

Progress, challenge and perspective of heterogeneous photocatalysts

Abstract: There is increasing interest in developing artificial systems that can mimic natural photosynthesis to directly harvest and convert solar energy into usable or storable energy resources. Photocatalysis, in which solar photons are used to drive redox reactions to produce chemical fuel, is the central process to achieve this goal. Despite significant efforts to date, a practically viable photocatalyst with sufficient efficiency, stability and low cost is yet to be demonstrated. It is often difficult to simultaneously achieve these different performance metrics with a single material component. The heterogeneous photocatalysts with multiple integrated functional components could combine the advantages of different components to overcome the drawbacks of single component photocatalysts. A wide range of heterostructures, including metal/semiconductor, semiconductor/semiconductor, molecule/semiconductor and multi-heteronanostructures, have been explored for improved photocatalysts by increasing the light absorption, promoting the charge separation and transportation, enhancing the redox catalytic activity and prolonging the functional life-time. The present review gives a concise overview of heterogeneous photocatalysts with a focus on the relationship between the structural architecture and the photocatalytic activity and stability.

Biosensors: sense and sensibility

Abstract: This review is based on the Theophilus Redwood Medal and Award lectures, delivered to Royal Society of Chemistry meetings in the UK and Ireland in 2012, and presents a personal overview of the field of biosensors. The biosensors industry is now worth billions of United States dollars, the topic attracts the attention of national initiatives across the world and tens of thousands of papers have been published in the area. This plethora of information is condensed into a concise account of the key achievements to date. The reasons for success are examined, some of the more exciting emerging technologies are highlighted and the author speculates on the importance of biosensors as a ubiquitous technology of the future for health and the maintenance of wellbeing.

Progress in bismuth vanadate photoanodes for use in solar water oxidation

Abstract: Harvesting energy directly from sunlight as nature accomplishes through photosynthesis is a very attractive and desirable way to solve the energy challenge. Many efforts have been made to find appropriate materials and systems that can utilize solar energy to produce chemical fuels. One of the most viable options is the construction of a photoelectrochemical cell that can reduce water to H2 or CO2 to carbon-based molecules. Bismuth vanadate (BiVO4) has recently emerged as a promising material for use as a photoanode that oxidizes water to O2 in these cells. Significant advancement in the understanding and construction of efficient BiVO4-based photoanode systems has been made within a short period of time owing to various newly developed ideas and approaches. In this review, the crystal and electronic structures that are closely related to the photoelectrochemical properties of BiVO4 are described first, and the photoelectrochemical properties and limitations of BiVO4 are examined. Subsequently, the latest efforts toward addressing these limitations in order to improve the performances of BiVO4-based photoanodes are discussed. These efforts include morphology control, formation of composite structures, composition tuning, and coupling oxygen evolution catalysts. The discussions and insights provided in this review reflect the most recent approaches and directions for general photoelectrode developments and they will be directly applicable for the understanding and improvement of other photoelectrode systems.

Triplet photosensitizers: from molecular design to applications

Abstract: Triplet photosensitizers (PSs) are compounds that can be efficiently excited to the triplet excited state which subsequently act as catalysts in photochemical reactions. The name is originally derived from compounds that were used to transfer the triplet energy to other compounds that have only a small intrinsic triplet state yield. Triplet PSs are not only used for triplet energy transfer, but also for photocatalytic organic reactions, photodynamic therapy (PDT), photoinduced hydrogen production from water and triplet-triplet annihilation (TTA) upconversion. A good PS should exhibit strong absorption of the excitation light, a high yield of intersystem crossing (ISC) for efficient production of the triplet state, and a long triplet lifetime to allow for the reaction with a reactant molecule. Most transition metal complexes show efficient ISC, but small molar absorption coefficients in the visible spectral region and short-lived triplet excited states, which make them unsuitable as triplet PSs. One obstacle to the development of new triplet PSs is the difficulty in predicting the ISC of chromophores, especially of organic compounds without any heavy atoms. This review article summarizes some molecular design rationales for triplet PSs, based on the molecular structural factors that facilitate ISC. The design of transition metal complexes with large molar absorption coefficients in the visible spectral region and long-lived triplet excited states is presented. A new method of using a spin converter to construct heavy atom-free organic triplet PSs is discussed, with which ISC becomes predictable, C60 being an example. To enhance the performance of triplet PSs, energy funneling based triplet PSs are proposed, which show broadband absorption in the visible region. Applications of triplet PSs in photocatalytic organic reactions, hydrogen production, triplet-triplet annihilation upconversion and luminescent oxygen sensing are briefly introduced.

Self-healing polymeric materials

Abstract: Inspired by nature, self-healing materials represent the forefront of recent developments in materials chemistry and engineering. This review outlines the recent advances in the field of self-healing polymers. The first part discusses thermodynamic requirements for self-healing networks in the context of conformation changes that contribute to the Gibbs free energy. The chain flexibility significantly contributes to the entropy changes, whereas the heat of reaction and the external energy input are the main contributors to enthalpy changes. The second part focuses on chemical reactions that lead to self-healing, and the primary classes are the covalent bonding, supramolecular assemblies, ionic interactions, chemo-mechanical self-healing, and shape memory polymers. The third part outlines recent advances using encapsulation, remote self-healing and the role of shape memory polymers. Recent developments in the field of self-healing polymers undeniably indicate that the main challenge will be the designing of high glass transition (Tg) functional materials, which also exhibit stimuli-responsive attributes. Build-in controllable hierarchical heterogeneousness at various length scales capable of remote self-healing by physical and chemical responses will be essential in designing future materials of the 21st century.

Nano-magnetite (Fe3O4) as a support for recyclable catalysts in the development of sustainable methodologies

Abstract: Surface functionalization of nano-magnetic nanoparticles is a well-designed way to bridge the gap between heterogeneous and homogeneous catalysis. The introduction of magnetic nanoparticles (MNPs) in a variety of solid matrices allows the combination of well-known procedures for catalyst heterogenization with techniques for magnetic separation. Magnetite is a well-known material, also known as ferrite (Fe3O4), and can be used as a versatile support for functionalization of metals, organocatalysts, N-heterocyclic carbenes, and chiral catalysts. It is used as a support for important homogeneous catalytically active metals such as Pd, Pt, Cu, Ni, Co, Ir, etc. to obtain stable and magnetically recyclable heterogeneous catalysts. Homogeneous organocatalysts can be successfully decorated with linkers/ligands on the surface of magnetite or alternatively the organocatalysts can be directly immobilized on the surface of magnetite. The functionalized magnetically retrievable catalysts or nanocatalysts that are increasingly being used in catalysis, green chemistry and pharmaceutically significant reactions are summarized in this review.

New directions in thermoresponsive polymers.

Abstract: Interest in thermoresponsive polymers has steadily grown over many decades, and a great deal of work has been dedicated to developing temperature sensitive macromolecules that can be crafted into new smart materials. However, the overwhelming majority of previously reported temperature-responsive polymers are based on poly(N-isopropylacrylamide) (PNIPAM), despite the fact that a wide range of other thermoresponsive polymers have demonstrated similar promise for the preparation of adaptive materials. Herein, we aim to highlight recent results that involve thermoresponsive systems that have not yet been as fully considered. Many of these (co)polymers represent clear opportunities for advancements in emerging biomedical and materials fields due to their increased biocompatibility and tuneable response. By highlighting recent examples of newly developed thermoresponsive polymer systems, we hope to promote the development of new generations of smart materials.

Three dimensional macroporous architectures and aerogels built of carbon nanotubes and/or graphene: synthesis and applications

Abstract: Carbon nanotubes and graphene are some of the most intensively explored carbon allotropes in materials science. This interest mainly resides in their unique properties with electrical conductivities as high as 104 S cm−1, thermal conductivities as high as 5000 W m−1 K and superior mechanical properties with elastic moduli on the order of 1 TPa for both of them. The possibility to translate the individual properties of these monodimensional (e.g. carbon nanotubes) and bidimensional (e.g. graphene) building units into two-dimensional free-standing thick and thin films has paved the way for using these allotropes in a number of applications (including photocatalysis, electrochemistry, electronics and optoelectronics, among others) as well as for the preparation of biological and chemical sensors. More recently and while recognizing the tremendous interest of these two-dimensional structures, researchers are noticing that the performance of certain devices can experience a significant enhancement by the use of three-dimensional architectures and/or aerogels because of the increase of active material per projected area. This is obviously the case as long as the nanometre-sized building units remain accessible so that the concept of hierarchical three-dimensional organization is critical to guarantee the mass transport and, as consequence, performance enhancement. Thus, this review aims to describe the different synthetic processes used for preparation of these three-dimensional architectures and/or aerogels containing either any or both allotropes, and the different fields of application in which the particular structure of these materials provided a significant enhancement in the efficacy as compared to their two-dimensional analogues or even opened the path to novel applications. The unprecedented compilation of information from both CNT- and graphene-based three-dimensional architectures and/or aerogels in a single revision is also of interest because it allows a straightforward comparison between the particular features provided by each allotrope.

Design, functionalization strategies and biomedical applications of targeted biodegradable/biocompatible polymer-based nanocarriers for drug delivery

Abstract: Design and functionalization strategies for multifunctional nanocarriers (e.g., nanoparticles, micelles, polymersomes) based on biodegradable/biocompatible polymers intended to be employed for active targeting and drug delivery are reviewed. This review will focus on the nature of the polymers involved in the preparation of targeted nanocarriers, the synthesis methods to achieve the desired macromolecular architecture, the selected coupling strategy, the choice of the homing molecules (vitamins, hormones, peptides, proteins, etc.), as well as the various strategies to display them at the surface of nanocarriers. The resulting morphologies and the main colloidal features will be given as well as an overview of the biological activities, with a special focus on the main in vivo achievements.

Perspective on the Martini model.

Abstract: The Martini model, a coarse-grained force field for biomolecular simulations, has found a broad range of applications since its release a decade ago. Based on a building block principle, the model combines speed and versatility while maintaining chemical specificity. Here we review the current state of the model. We describe recent highlights as well as shortcomings, and our ideas on the further development of the model.

Recent advances in dynamic covalent chemistry

Abstract: Dynamic covalent chemistry (DCvC) has been strongly integrated into diverse research fields, and has enabled easy access to a variety of combinatorial libraries, 2-D macrocycles, and 3-D molecular cages that target many important applications, such as drug discovery, biotechnology, molecular separation, light harvesting, etc. DCvC relies on the reversible formation and breaking of rather strong covalent bonding within molecules. Therefore it combines the error-correction capability of supramolecular chemistry and the robustness of covalent bonding. Compared to those supramolecular interactions, dynamic covalent reactions usually have slower kinetics and require the assistance of catalysts to achieve rapid equilibrium. Although the scope of dynamic covalent reactions is rapidly expanding, the reversible reactions suitable for DCvC are still very limited. The identification and development of new dynamic reactions and catalysts would be critical for the further advancement of DCvC. This review covers the recent development of dynamic covalent reactions as well as their applications.