scispace - formally typeset
Search or ask a question

Showing papers in "Energy Procedia in 2017"


Journal ArticleDOI
TL;DR: In this paper, the authors compared the similarities and differences of the P2P energy trading trails in different regions of the world and showed that although many of the trails focus on the business models acting similarly to a supplier's role in the electricity sector, it is also necessary to design the necessary communication and control networks that could enable P2PCE energy trading in or among local microgrids.

345 citations


Journal ArticleDOI
TL;DR: In this paper, the basic process designs of chemical absorption and membrane-based separation processes for CO 2 capture, as well as corresponding optimization methods including optimizing operational parameters, process modifications, membrane module types and so forth.

308 citations


Journal ArticleDOI
TL;DR: The Allam Cycle as mentioned in this paper is a CO2, oxy-fuel power cycle that utilizes hydrocarbon fuels while inherently capturing approximately 100% of atmospheric emissions, including nearly all CO2 emissions at a cost of electricity that is highly competitive with the best available energy production systems that do not employ CO2 capture.

248 citations


Journal ArticleDOI
TL;DR: In this paper, the authors reviewed the technology, energy, and cost of the recent available desalination systems and their potential to be integrated with the renewable energy resources and suggested that the solar still distillation (SD) system, which is simply a natural evaporation-condensation process, is the most practical renewable Desalination technique to be used in the remote arid areas; however, a further research is required to enhance their performance and to increase the productivities of these systems.

246 citations


Journal ArticleDOI
TL;DR: In this paper, great attention has been paid to develop non-fossil fuel energy sources to reduce carbon emissions and create a sustainable energy system for the future Storing the intermittent energy is one of t

236 citations


Journal ArticleDOI
TL;DR: In this article, the authors assessed the different waste-to-energy technologies developed to date, and divided them into four groups: biological treatment of waste, thermal treatment, landfill gas utilization, and biorefineries.

205 citations


Journal ArticleDOI
TL;DR: In this paper, thin layers of (TiO2) with a high photocatalytic activity and antibacterial properties were prepared by sol-gel process using Titanium Tetrachloride (TiCl4) as a precursor, and calcined at different calcination temperatures (400, 600, 800, and 1000) °C.

195 citations


Journal ArticleDOI
TL;DR: In this article, the authors analyzed the evolution of the organic rankine cycle (ORC) market over the years, with today 2.7 GW of cumulated installed capacity.

187 citations


Journal ArticleDOI
TL;DR: In this paper, the authors presented the new technology of 3D printing of buildings for the sustainable houses of the future, which has many advantages such as reduction of the costs and time, minimizing the pollution of environment and decrease of injuries and fatalities on construction sites.

182 citations


Journal ArticleDOI
TL;DR: Flexible IoT hierarchical architecture model for smart cities needs a flexible layered architecture where the things, the people and the cloud services are combined to facilitate an application task.

163 citations


Journal ArticleDOI
TL;DR: In this paper, the authors present the results from Phase II of the Offshore Code Comparison, Collaboration, Continued, with Correlation (OCC) project, where numerical models of the DeepCwind floating semisubmersible wind system were validated using measurement data from a 1/50th-scale validation campaign performed at the Maritime Research Institute Netherlands offshore wave basin.

Journal ArticleDOI
TL;DR: In this paper, an indirect type solar dryer was designed and developed to dry agricultural products, which consists of solar flat plate air collector with V-corrugated absorption plates, insulated drying chamber, and chimney for exhaust air.

Journal ArticleDOI
Anne-Kari Furre1, Ola Eiken, Håvard Alnes1, Jonas Nesland Vevatne1, Anders Kiær1 
TL;DR: The Sleipner CO 2 injection project was the world's first industrial offshore CO 2 Capture and Storage (CCS) project with more than 16 Mt CO 2 injected since 1996.

Journal ArticleDOI
TL;DR: In this article, the authors compared the major P2P electricity trading cases and reviewed the potential development and future challenges of the P2PC electricity trading business and provided valuable information for government and corporations.

Journal ArticleDOI
TL;DR: AgroCycle as mentioned in this paper is a Horizon 2020 collaborative project with 26 partners, focusing on the application of the "circular economy" across the agri-food sector, aiming to reduce waste while making best use of the waste produced by using economically viable processes and procedures to increase their value.

Journal ArticleDOI
TL;DR: Wang et al. as mentioned in this paper discussed the development of PV technology, then studied the power generation efficiency of floating PV systems, and finally comprehensively analyzed the advantages and potential of floating photovoltaic systems in China.

Journal ArticleDOI
TL;DR: In this article, the limits and potentials of pressure swing adsorption (PSA) as CO 2 capture technology into power plants are investigated and discussed, in order to provide a general evaluation.

Journal ArticleDOI
Saleh Mobin1, Firoz Alam1
TL;DR: Several promising microalgal species have drawn scientific interest as they offer commercial sources of high-value by-products (chemicals) such as β-carotene, astaxanthin, docosahexaenoic acid, eicosapentaenoic Acid, bioactive and functional pigments, natural dyes, polysaccharides, antioxidants and algal extracts.

Journal ArticleDOI
TL;DR: In this article, the causal relationship between technology innovation and CO 2 emissions with economic growth, electricity consumption and energy price in Malaysia was examined by employing VECM and TYDL granger causality tests.

Journal ArticleDOI
TL;DR: In this paper, a comparison of common and well-documented methods for varying the single-diode model parameters extracted at standard test conditions (STC) of a PV module to suit varying operating conditions of irradiance and temperature is presented.

Journal ArticleDOI
Yifan Gu1, Yue Li1, Xuyao Li1, Pengzhou Luo1, Hongtao Wang1, Xin Wang1, Jiang Wu1, Fengting Li1 
TL;DR: In this paper, the authors analyzed the energy consumption and recovery in wastewater treatment plants (WWTPs) and characterized the comprehensive influence factors of energy use in WWTPs including treatment techniques, treatment capacity and different regions.

Journal ArticleDOI
TL;DR: The collection, cleaning, and compilation of several such data sets found publicly on-line, in addition to several collected by the authors, serve as a primary repository of open, non-residential data sources that can be built upon by other researchers.

Journal ArticleDOI
TL;DR: In this paper, the simulated performance of a 100 kWp grid connected Si-poly photovoltaic system is analyzed for evaluating the effective energy output of the PV array, energy injected into the grid, performance ratio and other normalized energy productions per installed kWp.

Journal ArticleDOI
TL;DR: In this paper, the authors present the international co-operative work in the framework of the International Energy Agency (IEA), the Technology Cooperation Programme on District Heating and Cooling including Combined Heat and Power (DHC|CHP) Annex TS1.

Journal ArticleDOI
TL;DR: A brief overview of current electricity generation status and energy scenarios in Bangladesh has been presented in this article, where the energy pricing issues are also touched and new policies have been drafted to cope with the challenges in the energy sector.

Journal ArticleDOI
TL;DR: In this article, the performance and reliability of industrial p-type monocrystalline solar cells with dielectrically passivated rear side and corresponding modules are investigated, and the results of the mass production of Q.ANTUM solar cells at Hanwha Q CELLS on boron-doped p -type Czochralski-grown silicon (Cz-Si) substrates are presented, exceeding 21.5 % average conversion efficiency.

Journal ArticleDOI
Chao Long1, Jianzhong Wu1, Chenghua Zhang1, Meng Cheng1, Ali Al-Wakeel1 
TL;DR: This work provides network planners with guidelines of appropriate shares of DERs for better constructing their future networks, and facilitates a P2P energy trading market paradigm.

Journal ArticleDOI
TL;DR: This paper introduces energy prosumer service model applying blockchain technology that allows various energy sources to be connected to various users and producers and proposes a transaction model that can collect, utilize, and process data more efficiently by combining the above technologies.

Journal ArticleDOI
TL;DR: In this paper, twenty-seven different biomass species have been characterized by proximate analysis (moisture, volatile matter, fixed carbon, and ash contents), and various empirical equations which contain linear and nonlinear terms have been tested in order to predict the higher heating values (HHV) of full sample set from the proximate results.

Journal ArticleDOI
TL;DR: In this paper, a back propagation (BP) neural network was used to estimate the battery's state-of-health (SOH) using the HPPC (Hybrid Pulse Power Characterization) test.