Showing papers in "Environmental Science & Technology in 2002"

Pharmaceuticals, hormones, and other organic wastewater contaminants in U.S. streams, 1999-2000: a national reconnaissance.

Abstract: To provide the first nationwide reconnaissance of the occurrence of pharmaceuticals, hormones, and other organic wastewater contaminants (OWCs) in water resources, the U.S. Geological Survey used five newly developed analytical methods to measure concentrations of 95 OWCs in water samples from a network of 139 streams across 30 states during 1999 and 2000. The selection of sampling sites was biased toward streams susceptible to contamination (i.e. downstream of intense urbanization and livestock production). OWCs were prevalent during this study, being found in 80% of the streams sampled. The compounds detected represent a wide range of residential, industrial, and agricultural origins and uses with 82 of the 95 OWCs being found during this study. The most frequently detected compounds were coprostanol (fecal steroid), cholesterol (plant and animal steroid), N,N-diethyltoluamide (insect repellant), caffeine (stimulant), triclosan (antimicrobial disinfectant), tri(2-chloroethyl)phosphate (fire retardant), and 4-nonylphenol (nonionic detergent metabolite). Measured concentrations for this study were generally low and rarely exceeded drinking-water guidelines, drinking-water health advisories, or aquatic-life criteria. Many compounds, however, do not have such guidelines established. The detection of multiple OWCs was common for this study, with a median of seven and as many as 38 OWCs being found in a given water sample. Little is known about the potential interactive effects (such as synergistic or antagonistic toxicity) that may occur from complex mixtures of OWCs in the environment. In addition, results of this study demonstrate the importance of obtaining data on metabolites to fully understand not only the fate and transport of OWCs in the hydrologic system but also their ultimate overall effect on human health and the environment.

A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control

Abstract: Capture and sequestration of CO2 from fossil fuel power plants is gaining widespread interest as a potential method of controlling greenhouse gas emissions. Performance and cost models of an amine (MEA)-based CO2 absorption system for postcombustion flue gas applications have been developed and integrated with an existing power plant modeling framework that includes multipollutant control technologies for other regulated emissions. The integrated model has been applied to study the feasibility and cost of carbon capture and sequestration at both new and existing coal-burning power plants. The cost of carbon avoidance was shown to depend strongly on assumptions about the reference plant design, details of the CO2 capture system design, interactions with other pollution control systems, and method of CO2 storage. The CO2 avoidance cost for retrofit systems was found to be generally higher than for new plants, mainly because of the higher energy penalty resulting from less efficient heat integration as well ...

Removal of pharmaceuticals during drinking water treatment.

Abstract: The elimination of selected pharmaceuticals (bezafibrate, clofibric acid, carbamazepine, diclofenac) during drinking water treatment processes was investigated at lab and pilot scale and in real waterworks. No significant removal of pharmaceuticals was observed in batch experiments with sand under natural aerobic and anoxic conditions, thus indicating low sorption properties and high persistence with nonadapted microorganisms. These results were underscored by the presence of carbamazepine in bank-filtrated water with anaerobic conditions in a waterworks area. Flocculation using iron(III) chloride in lab-scale experiments (Jar test) and investigations in waterworks exhibited no significant elimination of the selected target pharmaceuticals. However, ozonation was in some cases very effective in eliminating these polar compounds. In lab-scale experiments, 0.5 mg/L ozone was shown to reduce the concentrations of diclofenac and carbamazepine by more than 90%, while bezafibrate was eliminated by 50% with a 1.5 mg/L ozone dose. Clofibric acid was stable even at 3 mg/L ozone. Under waterworks conditions, similar removal efficiencies were observed. In addition to ozonation, filtration with granular activated carbon (GAC) was very effective in removing pharmaceuticals. Except for clofibric acid, GAC in pilot-scale experiments and waterworks provided a major elimination of the pharmaceuticals under investigation.

Adsorption of several metal ions onto a low-cost biosorbent: kinetic and equilibrium studies.

Abstract: Sugar beet pulp generated by sugar-refining factories has been shown to be an effective adsorbent for the removal of heavy metals from aqueous solutions. The structural components related to the metallic adsorption being determined, batch adsorption studies were performed for several metal ions, namely, Pb2+, Cu2+, Zn2+, Cd2+, and Ni2+ cations. Two simple kinetic models, that is, pseudo-first- and pseudo-second-order, were tested to investigate the adsorption mechanisms. The kinetic parameters of the models were calculated and discussed. For an 8 x 10(-4) M initial metal concentration, the initial sorption rates (v0) ranged from 0.063 mmol x g(-1) x min(-1) for Pb2+ to 0.275 mmol x g(-1) x min(-1) for Ni2+ ions, in the order Ni2+ > Cd2+ > Zn2+ > Cu2+ > Pb2+. The equilibrium data fitted well with the Langmuir and Freundlich models and showed the following affinity order of the material: Pb2+ > Cu2+ > Zn2+ > Cd2+ > Ni2+. The metal removal was strongly dependent on pH and, to a lesser extent, ionic strength. Ion exchange with Ca2+ ions neutralizing the carboxyl groups of the polysaccharide was found to be the predominant mechanism, added with complexation for Pb2+, Cu2+, and Zn2+ metals.

Fluorescence Inner-Filtering Correction for Determining the Humification Index of Dissolved Organic Matter

Abstract: The use of fluorescence spectrometry has been suggested as a simple method to determine the extent of natural organic matter humification by quantifying the red-shifting of fluorescence emission that occurs with increasing humification. Humification indices are calculated by dividing fluorescence intensity at longer wavelengths by intensity at shorter wavelengths. These indices calculated without any specific efforts to standardize dissolved organic matter (DOM) concentration will result in index values thatvary with DOM concentration due to fluorescence innerfiltering effects. This study critically evaluated the effect of DOM concentration on humification index determination using organic matter isolated from field corn extract, soil: water extract, and soil fulvic acid. The results show that humification index values are sensitive to DOM concentration of the solution and are linear with respect to transmittance of the solution at the 254 nm used as the excitation wavelength. An approximate correction for DOM is to exploit the linear nature of the regression fit and to determine index values at the extrapolated 100% transmittance value. An exact correction using explicit correction factors for both primary and secondary innerfiltration effects was shown to give humification index values that are concentration invariant when absorbance of the solution at 254 nm was less than approximately 0.3 unit. Defining the humification index as the fluorescence intensity in the 300-345 nm region divided by the sum of intensity in the 300-345 nm and 435-480 nm regions was statistically advantageous. This study suggests that for quantitative results which can be used to compare humification of natural organic matter across different studies, correction of the fluorescence emission spectra for innerfiltration effects is needed.

Measurement of Emissions from Air Pollution Sources. 5. C1−C32 Organic Compounds from Gasoline-Powered Motor Vehicles

Abstract: Gas- and particle-phase organic compounds present in the tailpipe emissions from an in-use fleet of gasoline-powered automobiles and light-duty trucks were quantified using a two-stage dilution source sampling system. The vehicles were driven through the cold-start Federal Test Procedure (FTP) urban driving cycle on a transient dynamometer. Emission rates of 66 volatile hydrocarbons, 96 semi-volatile and particle-phase organic compounds, 27 carbonyls, and fine particle mass and chemical composition were quantified. Six isoprenoids and two tricyclic terpanes, which are quantified using new source sampling techniques for semi-volatile organic compounds, have been identified as potential tracers for gasoline-powered motor vehicle emissions. A composite of the commercially distributed California Phase II Reformulated Gasoline used in these tests was analyzed by several analytical methods to quantify the gasoline composition, including some organic compounds that are found in the atmosphere as semi-volatile and particle-phase organic compounds. These results allow a direct comparison of the semi-volatile and particle-phase organic compound emissions from gasoline-powered motor vehicles to the gasoline burned by these vehicles. The distribution of n-alkanes and isoprenoids emitted from the catalyst-equipped gasoline-powered vehicles is the same as the distribution of these compounds found in the gasoline used, whereas the distribution of these compounds in the emissions from the noncatalyst vehicles is very different from the distribution in the fuel. In contrast, the distribution of the polycyclic aromatic hydrocarbons and their methylated homologues in the gasoline is significantly different from the distribution of the PAH in the tailpipe emissions from both types of vehicles.

Something from "nothing"--eight weak estrogenic chemicals combined at concentrations below NOECs produce significant mixture effects.

Abstract: We tested whether multicomponent mixtures of xenoestrogens would produce significant effects when each component was combined at concentrations below its individual NOEC or EC01 level. The estrogenic effects of eight chemicals of environmental relevance, including hydroxylated PCBs, benzophenones, parabenes, bisphenol A, and genistein, were recorded using a recombinant yeast estrogen screen (YES). To ensure that no chemical contributed disproportionately to the overall combination effect, a mixture was prepared at a mixture ratio proportional to the potency of each individual component. The performance of four approaches for the calculation of additive combination effects (concentration addition, toxicity equivalency factors, effect summation, and independent action) was compared. Experimental testing of the predictions revealed that concentration addition and its application, the toxicity equivalency factor approach, were valid methods for the calculation of additive mixture effects. There was excellent agreement between prediction and observation. In contrast, independent action and effect summation led to clear underestimations of the experimentally observed responses. Crucially, there were substantial mixture effects even though each chemical was present at levels well below its NOEC and EC01. We conclude that estrogenic agents are able to act together to produce significant effects when combined at concentrations below their NOECs. Our results highlight the limitations of the traditional focus on the effects of single agents. Hazard assessments that ignore the possibility of joint action of estrogenic chemicals will almost certainly lead to significant underestimations of risk.

Natural organic matter affects arsenic speciation and sorption onto hematite.

Abstract: Arsenic mobility in natural environments is controlled primarily by sorption onto metal oxide surfaces, and the extent of this sorption may be influenced strongly by the presence of other dissolved substances that interact with surfaces or with arsenic itself. Natural organic matter (NOM), a prevalent constituent of natural waters, is highly reactive toward both metals and surfaces and is thus a clear candidate to influence arsenic mobility. The objectives of this study were therefore to reveal the influences of diverse NOM samples on the sorption of arsenic onto hematite, a model metal oxide, as well as to reveal influences of arsenic on the sorption of NOM, using conditions and concentrations relevant to natural freshwater environments. Of the six NOM samples tested, four formed aqueous complexes with arsenate and arsenite. The extent of complexation varied with the NOM origin and, in particular, increased with the cationic metal (primarily Fe) content of the NOM sample. In addition, every NOM sample showed active redox behavior toward arsenic species, indicating that NOM may greatly influence redox as well as complexation speciation of arsenic in freshwater environments. When NOM and As were incubated together with hematite, NOM dramatically delayed the attainment of sorption equilibrium and diminished the extent of sorption of both arsenate and arsenite. Consistent with this result, when NOM and As were introduced sequentially, all NOM samples displaced sorbed arsenate and arsenite from hematite surfaces, and arsenic species similarly displaced sorbed NOM from hematite in significant quantities. Competition between NOM and As for sorption thus appears to be a potentially important process in natural waters, suggesting that NOM may play a greater role in arsenic mobility than previously recognized. In addition, in all sorption experiments, arsenite was consistently desorbed or prevented from sorbing to a greater extent than arsenate, indicating that interactions with NOM may also partially explain the generally greater mobility of arsenite in natural environments.

Triclosan: Occurrence and fate of a widely used biocide in the aquatic environment: Field measurements in wastewater treatment plants, surface waters, and lake sediments

Abstract: Triclosan is used as an antimicrobial agent in a wide range of medical and consumer care products. To investigate the occurrence and fate of triclosan in the aquatic environment, analytical methods for the quantification of triclosan in surface water and wastewater, sludge, and sediment were developed. Furthermore, the fate of triclosan in a wastewater treatment plant (biological degradation, 79%; sorption to sludge, 15%; input into the receiving surface water, 6%) was measured during a field study. Despite the high overall removal rate, the concentration in the wastewater effluents were in the range of 42−213 ng/L leading to concentrations of 11−98 ng/L in the receiving rivers. Moreover, a high removal rate of 0.03 d-1 for triclosan in the epilimnion of the lake Greifensee was observed. This is due to photochemical degradation. The measured vertical concentration profile of triclosan in a lake sediment core of lake Greifensee reflects its increased use over 30 years. As the measured concentrations in sur...

Comparison of Five In Vitro Digestion Models To Study the Bioaccessibility of Soil Contaminants

Abstract: Soil ingestion can be a major exposure route for humans to many immobile soil contaminants. Exposure to soil contaminants can be overestimated if oral bioavailability is not taken into account. Several in vitro digestion models simulating the human gastrointestinal tract have been developed to assess mobilization of contaminants from soil during digestion, i.e., bioaccessibility. Bioaccessibility is a crucial step in controlling the oral bioavailability for soil contaminants. To what extent in vitro determination of bioaccessibility is method dependent has, until now, not been studied. This paper describes a multi-laboratory comparison and evaluation of five in vitro digestion models. Their experimental design and the results of a round robin evaluation of three soils, each contaminated with arsenic, cadmium, and lead, are presented and discussed. A wide range of bioaccessibility values were found for the three soils: for As 6-95%, 1-19%, and 10-59%; for Cd 7-92%, 5-92%, and 6-99%; and for Pb 4-91%, 1-56%, and 3-90%. Bioaccessibility in many cases is less than 50%, indicating that a reduction of bioavailability can have implications for health risk assessment. Although the experimental designs of the different digestion systems are distinct, the main differences in test results of bioaccessibility can be explained on the basis of the applied gastric pH. High values are typically observed for a simple gastric method, which measures bioaccessibility in the gastric compartment at low pHs of 1.5. Other methods that also apply a low gastric pH, and include intestinal conditions, produce lower bioaccessibility values. The lowest bioaccessibility values are observed for a gastrointestinal method which employs a high gastric pH of 4.0.

Distribution of polycyclic aromatic hydrocarbons (PAHs) in rivers and estuaries in Malaysia: a widespread input of petrogenic PAHs.

Abstract: This is the first publication on the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in riverine and coastal sediments in South East Asia where the rapid transfer of land-based pollutants into aquatic environments by heavy rainfall and runoff waters is of great concern. Twenty-nine Malaysian riverine and coastal sediments were analyzed for PAHs (3-7 rings) by gas chromatography mass spectrometry. Total PAHs concentrations in the sediment ranged from 4 to 924 ng/g. Alkylated homologues were abundant for all sediment samples. The ratio of the sum of methylphenanthrenes to phenanthrene (MP/P), an index of petrogenic PAHs contribution, was more than unity for 26 sediment samples and more than 3 for seven samples for urban rivers covering a broad range of locations. The MP/P ratio showed a strong correlation with the total PAHs concentrations, with an r2 value of 0.74. This ratio and all other compositional features indicated that Malaysian urban sediments are heavily impacted by petrogenic PAHs. This finding is in contrast to other studies reported in many industrialized countries where PAHs are mostly of pyrogenic origin. The MP/P ratio was also significantly correlated with higher molecular weight PAHs such as benzo[a]pyrene, suggesting unique PAHs source in Malaysia which contains both petrogenic PAHs and pyrogenic PAHs. PAHs and hopanes fingerprints indicated that used crankcase oil is one of the major contributors of the sedimentary PAHs. Two major routes of inputs to aquatic environments have been identified: (1) spillage and dumping of waste crankcase oil and (2) leakage of crankcase oils from vehicles onto road surfaces, with the subsequent washout by street runoff. N-Cyclohexyl-2-benzothiazolamine (NCBA), a molecular marker of street dust, was detected in the polluted sediments. NCBA and other biomarker profiles confirmed our hypothesis of the input from street dust contained the leaked crankcase oil. The fingerprints excluded crude oil, fresh lubricating oil, asphalt, and tire-particles as major contributors.

Surface complexation of ferrous iron and carbonate on ferrihydrite and the mobilization of arsenic.

Abstract: Surface complexation models are commonly used to predict the mobility of trace metals in aquifers. For arsenic in groundwater, surface complexation models cannot be used because the database is incomplete. Both carbonate and ferrous iron are often present at a high concentration in groundwater and will influence the sorption of arsenic, but the surface complexation constants are absent in the database of Dzombak and Morel. This paper presents the surface complexation constants for carbonate and ferrous iron on ferrihydrite as derived for the double-layer model. For ferrous iron the constants were obtained from published data supplemented by new experiments to determine the sorption on the strong sites of ferrihydrite. For carbonate the constants were derived from experiments by Zachara et al., who employed relatively low concentrations of carbonate. The double-layer model, optimized for low concentrations, was tested against sorption experiments of carbonate on goethite at higher concentration by Villalobos and Leckie, and reasonable agreement was found. Sorption was also estimated using linear free energy relations (LFER), and results compared well with our derived constants. Model calculations confirm that sorption of particularly carbonate at common soil and groundwater concentrations reduces the sorption capacity of arsenic on ferrihydrite significantly. The displacing effect of carbonate on sorbed arsenate and arsenite has been overlooked in many studies. It may be an important cause for the high concentrations of arsenic in groundwater in Bangladesh. Sediments containing high amounts of sorbed arsenic are deposited in surface water with low carbonate concentrations. Subsequently the sediments become exposed to groundwater with a high dissolved carbonate content, and arsenic is mobilized by displacement from the sediment surface.

Kinetics of nitrate, nitrite, and Cr(VI) reduction by iron metal.

Abstract: The kinetics of nitrate, nitrite, and Cr(VI) reduction by three types of iron metal (Fe0) were studied in batch reactors for a range of Fe0 surface area concentrations and solution pH values (5.5−9.0). At pH 7.0, there was only a modest difference (2−4×) in first-order rate coefficients (kobs) for each contaminant among the three Fe0 types investigated (Fisher, Peerless, and Connelly). The kobs values at pH 7.0 for both nitrite and Cr(VI) reduction were first-order with respect to Fe0 surface area concentration, and average surface area normalized rate coefficients (kSA) of 9.0 × 10-3 and 2.2 × 10-1 L m-2 h-1 were determined for nitrite and Cr(VI), respectively. Unlike nitrite and Cr(VI), Fe0 surface area concentration had little effect on rates of nitrate reduction (with the exception of Connelly Fe0, which reduced nitrate at slower rates at higher Fe0 surface areas). The rates of nitrate, nitrite, and Cr(VI) reduction by Fisher Fe0 decreased with increasing pH with apparent reaction orders of 0.49 ± 0.0...

Characterization and comparison of three passive air samplers for persistent organic pollutants.

Abstract: The accumulation of persistent organic pollutants by three passive sampling mediasemipermeable membrane devices (SPMDs), polyurethane foam (PUF) disks, and an organic-rich soilwas investigated. The media were exposed to contaminated indoor air over a period of 450 days, and concentrations in the air and in the media were monitored for individual polychlorinated biphenyl (PCB) congeners and polychlorinated naphthalene homologue groups. Uptake was initially linear and governed by the surface area of the sampler and the boundary layer air-side mass transfer coefficient (MTC). Mean values of the MTC were 0.13, 0.11, and 0.26 cm s-1 for SPMD, PUF, and soil, respectively. As the study progressed, equilibrium was established between ambient air and the passive sampling media for the lower molecular weight PCB congeners. This information was used to calculate passive sampler−air partition coefficients, KPSM-A. These were correlated to the octanol−air partition coefficient, and the resulting regressions were used ...

Arsenic(III) Oxidation and Arsenic(V) Adsorption Reactions on Synthetic Birnessite

Abstract: The oxidation of arsenite (As(III)) by manganese oxide is an important reaction in both the natural cycling of As and the development of remediation technology for lowering the concentration of dissolved As(III) in drinking water. This study used both a conventional stirred reaction apparatus and extended X-ray absorption fine structure (EXAFS) spectroscopy to investigate the reactions of As(III) and As(V) with synthetic birnessite (MnO2). Stirred reactor experiments indicate that As(III) is oxidized by MnO2 followed by the adsorption of the As(V) reaction product on the MnO2 solid phase. The As(V)-Mn interatomic distance determined by EXAFS analysis for both As(III)- and As(V)-treated MnO2 was 3.22 A, giving evidence for the formation of As(V) adsorption complexes on MnO2 crystallite surfaces. The most likely As(V)-MnO2 complex is a bidentate binuclear corner sharing (bridged) complex occurring at MnO2 crystallite edges and interlayer domains. In the As(III)-treated MnO2 systems, reductive dissolution of the MnO2 solid during the oxidation of As(III) caused an increase in the adsorption of As(V) when compared with As(V)-treated MnO2. This suggested that As(III) oxidation caused a surface alteration, creating fresh reaction sites for As(V) on MnO2 surfaces.

Arsenic accumulation and metabolism in rice (Oryza sativa L.)

Abstract: The use of arsenic (As) contaminated groundwater for irrigation of crops has resulted in elevated concentrations of arsenic in agricultural soils in Bangladesh, West Bengal (India), and elsewhere. Paddy rice (Oryza sativa L.) is the main agricultural crop grown in the arsenic-affected areas of Bangladesh. There is, therefore, concern regarding accumulation of arsenic in rice grown those soils. A greenhouse study was conducted to examine the effects of arsenic-contaminated irrigation water on the growth of rice and uptake and speciation of arsenic. Treatments of the greenhouse experiment consisted of two phosphate doses and seven different arsenate concentrations ranging from 0 to 8 mg of As L(-1) applied regularly throughout the 170-day post-transplantation growing period until plants were ready for harvesting. Increasing the concentration of arsenate in irrigation water significantly decreased plant height, grain yield, the number of filled grains, grain weight, and root biomass, while the arsenic concentrations in root, straw, and rice husk increased significantly. Concentrations of arsenic in rice grain did not exceed the food hygiene concentration limit (1.0 mg of As kg(-1) dry weight). The concentrations of arsenic in rice straw (up to 91.8 mg kg(-1) for the highest As treatment) were of the same order of magnitude as root arsenic concentrations (up to 107.5 mg kg(-1)), suggesting that arsenic can be readily translocated to the shoot. While not covered by food hygiene regulations, rice straw is used as cattle feed in many countries including Bangladesh. The high arsenic concentrations may have the potential for adverse health effects on the cattle and an increase of arsenic exposure in humans via the plant-animal-human pathway. Arsenic concentrations in rice plant parts except husk were not affected by application of phosphate. As the concentration of arsenic in the rice grain was low, arsenic speciation was performed only on rice straw to predict the risk associated with feeding contaminated straw to the cattle. Speciation of arsenic in tissues (using HPLC-ICP-MS) revealed that the predominant species present in straw was arsenate followed by arsenite and dimethylarsinic acid (DMAA). As DMAA is only present at low concentrations, it is unlikely this will greatly alter the toxicity of arsenic present in rice.

Sorption of polycyclic aromatic hydrocarbons and polychlorinated biphenyls to soot and soot-like materials in the aqueous environment: Mechanistic considerations

Abstract: Recent studies have shown that sorption of polycyclic aromatic hydrocarbons (PAHs) in soot-water systems is exceptionally strong. As a consequence, soot may fully control the actual fate of PAHs in the aquatic environment. However, sorption has only been characterized for a limited number of PAHs to diesel soot, and the mechanism is poorly understood. In this paper, we present an extensive data set of sorbent-water distribution coefficients (K(S), n = 236) for a series of PAHs (both native and added) and polychlorinated biphenyls (PCBs) to five different types of soot and five soot-like materials. Both Ks values and physicochemical properties of the sorbents show large variation. In general, sorption is very strong, with K(S) values up to 10(10), showing the highest distribution coefficients on a mass basis ever reported. Sorption of in particular PAHs is often over 1000 times as strong as sorption to amorphous sedimentary organic carbon. The variation in K(S) values cannot be explained by "soot carbon fractions" or specific surface areas of the sorbents. Instead, values for native PAHs are mostly determined by the sorbates' molar volume, and values for added PAHs and PCBs are determined by the sorbents' average pore diameter. From differences in K(S) values between native and added PAH analogues, it can be deduced that generally more than 50% (with values up to 97%) of the native PAH concentration in soot is not available for distribution to the aqueous phase. We conclude that this is caused by physical entrapment of the chemicals within the solid matrix. Furthermore, most sorbents appear to preferentially sorb PCBs with planar configurations, a phenomenon most likely driven by sorption in molecular-sized pores. Pore sorption is also concluded to be the most important sorption mechanism for added PAHs together with pi-pi interaction processes with flat aromatic sorbent surfaces. Frequently observed, slowly desorbing, resistant contaminant fractions in sediments may very well be explained on the basis of these results.

Formation of N-nitrosodimethylamine (NDMA) from dimethylamine during chlorination.

Abstract: Chlorine disinfection of secondary wastewater effluent and drinking water can result in the production of the potent carcinogen N-nitrosodimethylamine (NDMA) at concentrations of approximately 100 and 10 parts per trillion (ng/L), respectively. Laboratory experiments with potential NDMA precursors indicate that NDMA formation can form during the chlorination of dimethylamine and other secondary amines. The formation of NDMA during chlorination may involve the slow formation of 1,1-dimethylhydrazine by the reaction of monochloramine and dimethylamine followed by its rapid oxidation to NDMA and other products including dimethylcyanamide and dimethylformamide. Other pathways also lead to NDMA formation during chlorination such as the reaction of sodium hypochlorite with dimethylamine. However, the rate of NDMA formation is approximately an order of magnitude slower than that observed when monochloramine reacts with dimethylamine. The reaction exhibits a strong pH dependence due to competing reactions. It may be possible to reduce NDMA formation during chlorination by removing ammonia prior to chlorination, by breakpoint chlorination, or by avoidance of the use of monochloramine for drinking water disinfection.

Dynamic oxidation of gaseous mercury in the Arctic troposphere at polar sunrise.

Abstract: Gaseous elemental mercury (Hg0) is a globally distributed air toxin with a long atmospheric residence time. Any process that reduces its atmospheric lifetime increases its potential accumulation in the biosphere. Our data from Barrow, AK, at 71 degrees N show that rapid, photochemically driven oxidation of boundary-layer Hg0 after polar sunrise, probably by reactive halogens, creates a rapidly depositing species of oxidized gaseous mercury in the remote Arctic troposphere at concentrations in excess of 900 pg m(-3). This mercury accumulates in the snowpack during polar spring at an accelerated rate in a form that is bioavailable to bacteria and is released with snowmelt during the summer emergence of the Arctic ecosystem. Evidence suggests that this is a recent phenomenon that may be occurring throughout the earth's polar regions.

Assessing the combined roles of natural organic matter and black carbon as sorbents in sediments.

Abstract: We hypothesized that two mechanisms, absorption into natural organic matter and adsorption onto combustion-derived black carbon (BC), act in parallel to bind polycyclic aromatic hydrocarbons (PAHs) to Boston Harbor sediments. To focus on BC-adsorption, we removed the non-BC fraction by combusting near shore sediments at 375 °C for 24 h under air, leaving ca. 16% of the reduced carbon. The isotherm for pyrene sorption onto our combusted sediment was nonlinear with a Freundlich exponent of 0.62 ± 0.12 and a BC-normalized distribution coefficient (μg/kgBC)/(μg/L)n of 106.25±0.14. Pyrene sorption to untreated sediment was reasonably estimated using Kd = foc 104.7 + fBC 106.25 Cw(0.62-1) where foc was the non-BC organic carbon content, 104.7 was the organic carbon-normalized absorption coefficient for pyrene (L/kgoc), fBC was the BC content, and Cw was the dissolved pyrene concentration (μg/L). C/H/N ratios indicated that our environmental BC differed substantially from NIST diesel soot, possibly due to inclus...

Complexation with dissolved organic matter and solubility control of heavy metals in a sandy soil.

Abstract: The complexation of heavy metals with dissolved organic matter (DOM) in the environment influences the solubility and mobility of these metals. In this paper, we measured the complexation of Cu, Cd, Zn, Ni, and Pb with DOM in the soil solution at pH 3.7-6.1 using a Donnan membrane technique. The results show that the DOM-complexed species is generally more significant for Cu and Pb than for Cd, Zn, and Ni. The ability of two advanced models for ion binding to humic substances, e.g., model VI and NICA-Donnan, in the simulation of metal binding to natural DOM was assessed by comparing the model predictions with the measurements. Using the default parameters of fulvic and humic acid, the predicted concentrations of free metal ions from the solution speciation calculation using the two models are mostly within 1 order of magnitude difference from the measured concentrations, except for Ni and Pb in a few samples. Furthermore, the solid-solution partitioning of the metals was simulated using a multisurface model, in which metal binding to soil organic matter, dissolved organic matter, clay, and iron hydroxides was accounted for using adsorption and cation exchange models (NICA-Donnan, Donnan, DDL, CD-MUSIC). The model estimation of the dissolved concentration of the metals is mostly within 1 order of magnitude difference from those measured except for Ni in some samples and Pb. The solubility of the metals depends mainly on the metal loading over soil sorbents, pH, and the concentration of inorganic ligands and DOM in the soil solution.

Biological hydrogen production measured in batch anaerobic respirometers

Abstract: The biological production of hydrogen from the fermentation of different substrates was examined in batch tests using heat-shocked mixed cultures with two techniques: an intermittent pressure release method (Owen method) and a continuous gas release method using a bubble measurement device (respirometric method). Under otherwise identical conditions, the respirometric method resulted in the production of 43% more hydrogen gas from glucose than the Owen method. The lower conversion of glucose to hydrogen using the Owen protocol may have been produced by repression of hydrogenase activity from high partial pressures in the gastight bottles, but this could not be proven using a thermodynamic/rate inhibition analysis. In the respirometric method, total pressure in the headspace never exceeded ambient pressure, and hydrogen typically composed as much as 62% of the headspace gas. High conversion efficiencies were consistently obtained with heat-shocked soils taken at different times and those stored for up to a month. Hydrogen gas composition was consistently in the range of 60-64% for glucose-grown cultures during logarithmic growth but declined in stationary cultures. Overall, hydrogen conversion efficiencies for glucose cultures were 23% based on the assumption of a maximum of 4 mol of hydrogen/ mol of glucose. Hydrogen conversion efficiencies were similar for sucrose (23%) and somewhat lower for molasses (15%) but were much lower for lactate (0.50%) and cellulose (0.075%).

Occurrence and environmental behavior of the bactericide triclosan and its methyl derivative in surface waters and in wastewater.

Abstract: The bactericide triclosan and methyl triclosan, an environmental transformation product thereof, were detected in lakes and in a river in Switzerland at concentrations of up to 74 and 2 ng L(-1), respectively. Both compounds were emitted via wastewater treatment plants (WWTPs), with methyl triclosan probably being formed by biological methylation. A regional mass balance for a lake (Greifensee) indicated significant removal of triclosan by processes other than flushing. Laboratory experiments showed that triclosan in the dissociated form was rapidly decomposed in lake water when exposed to sunlight (half-life less than 1 h in August at 47 degrees latitude). Methyl triclosan and nondissociated triclosan, however, were relatively stable toward photodegradation. Modeling these experimental data for the situation of lake Greifensee indicated that photodegradation can account for the elimination of triclosan from the lake and suggested a seasonal dependence of the concentrations (lower in summer, higher in winter), consistent with observed concentrations. Although emissions of methyl triclosan from WWTPs were only approximately 2% relative to those of triclosan, its predicted concentration relative to triclosan in the epilimnion of the lake increases to 30% in summer. Passive sampling with semipermeable membrane devices (SPMDs) indicated the presence of methyl triclosan in lakes with inputs from anthropogenic sources but not in a remote mountain lake. Surprisingly, no parent triclosan was observed in the SPMDs from these lakes. Methyl triclosan appears to be preferentially accumulated in SPMDs under the conditions in these lakes, leading to concentrations comparable to those of persistent chlorinated organic pollutants.

Source apportionment of PM2.5 in the Southeastern United States using solvent-extractable organic compounds as tracers

Abstract: A chemical mass balance (CMB) receptor model using particle-phase organic compounds as tracers is applied to apportion the primary source contributions to fine particulate matter and fine particulate organic carbon concentrations in the southeastern United States to determine the seasonal variability of these concentrations. Source contributions to particles with aerodynamic diameter ≤2.5 μm (PM2.5) collected from four urban and four rural/suburban sites in AL, FL, GA, and MS during April, July, and October 1999 and January 2000 are calculated and presented. Organic compounds in monthly composite samples at each site are identified and quantified by gas chromatography/mass spectrometry and are used as molecular markers in the CMB model. The major contributors to identified PM2.5 organic carbon concentrations at these sites in the southeastern United States include wood combustion (25−66%), diesel exhaust (14−30%), meat cooking (5−12%), and gasoline-powered motor vehicle exhaust (0−10%), as well as smaller but statistically significant contributions from natural gas combustion, paved road dust, and vegetative detritus. The primary sources determined in the present study when added to secondary aerosol formation account for on average 89% of PM2.5 mass concentrations, with the major contributors to PM2.5 mass as secondary sulfate (30 ± 6%), wood combustion (15 ± 12%), diesel exhaust (16 ± 7%), secondary ammonium (8 ± 2%), secondary nitrate (4 ± 3%), meat cooking (3 ± 2%), gasoline-powered motor vehicle exhaust (2 ± 2%), and road dust (2 ± 2%). Distinct seasonality is observed in source contributions, including higher contributions from wood combustion during the colder months of October and January. In addition, higher percentages of unexplained fine organic carbon concentrations are observed in July, which are likely due to an increase in secondary organic aerosol formation during the summer season.

Monitoring Perfluorinated Surfactants in Biota and Surface Water Samples Following an Accidental Release of Fire-Fighting Foam into Etobicoke Creek

Abstract: Perfluorinated surfactants have emerged as priority environmental contaminants due to recent reports of their detection in environmental and biological matrices as well as concerns regarding their persistence and toxicity. In June 2000, 22000 L of fire retardant foam containing perfluorinated surfactants was accidentally released at L. B. Pearson International Airport, Toronto, ON, and subsequently entered into Etobicoke Creek, a tributary to Lake Ontario. A suite of analytical tools that include liquid chromatography/tandem mass spectrometry (LC/MS/MS) and 19F NMR were employed to characterize fish (common shiner, Notropus cornutus) and surface water samples collected following the discharge of the perfluorinated material. Total perfluoroalkanesulfonate (4, 6, and 8 carbons) concentrations in fish liver samples ranged from 2.00 to 72.9 microg/g, and total perfluorocarboxylate (5-14 carbons) concentrations ranged from 0.07 to 1.02 microg/g. In addition to fish samples, total perfluoroalkanesulfonate (6 and 8 carbons) concentrations were detected in creek water samples by LC/MS/MS over a 153 day sampling period with concentrations ranging from <0.017 to 2260 microg/L; perfluorooctanoate concentrations (<0.009-11.3 microg/L) were lower than those observed for the perfluoroalkane-sulfonates. By 19F NMR, the total perfluorinated surfactant concentrations in surface water samples ranged from < 10 to 17000 microg/L. A bioaccumulation factor range of 6300-125000 was calculated for perfluorooctanesulfonate, based on concentrations in fish liver and surface water. The residence time of perfluorooctanesulfonate in Etobicoke Creek as well as the high bioaccumulation in fish liver suggests that perfluorinated surfactants will persist and bioaccumulate following release into the aquatic environment.

Quantitative Characterization of Trace Levels of PFOS and PFOA in the Tennessee River

Abstract: Although there is evidence of widespread distribution of organic fluorochemicals such as perfluorooctane sulfonate and perfluorooctanoate, in the environment, the versatility of these compounds in industrial and commercial applications complicates characterization of pathways into the environment. A solid-phase extraction method coupled with HPLC-negative-ion electrospray tandem mass spectrometry was developed to quantitatively measure trace levels of organic fluorochemicals in drinking water and surface water. Using this method, certain fluorochemicals can be quantitatively measured in water samples down to 25 ppt, a level well below calculated drinking water advisory levels. To assess fluorochemical distribution in a localized geography and to ascertain whether fluorochemical manufacturing facilities contribute to environmental levels of fluorochemicals, 40 water samples were collected on an 80-mi stretch of the Tennessee River, near a fluorochemical manufacturing site in Decatur, AL. Low levels (ppt) of perfluorooctane sulfonate were determined throughout the stretch of river sampled. Concentrations of the measured fluorochemicals increased downstream of the fluorochemical manufacturing facility, indicating that effluent from manufacturing is one likely source of organic fluorochemicals into the river.

Field demonstration of successful bioaugmentation to achieve dechlorination of tetrachloroethene to ethene.

Abstract: A laboratory microcosm study and a pilot scale field test were conducted to evaluate biostimulation and bioaugmentation to dechlorinate tetrachloroethene (PCE) to ethene at Kelly Air Force Base. The site groundwater contained about 1 mg/L of PCE and lower amounts of trichloroethene (TCE) and cis-1,2-dichloroethene (cDCE). Laboratory microcosms inoculated with soil and groundwater from the site exhibited partial dechlorination of TCE to cDCE when amended with lactate or methanol. Following the addition of a dechlorinating enrichment culture, KB-1, the chlorinated ethenes in the microcosms were completely converted to ethene. The KB-1 culture is a natural dechlorinating microbial consortium that contains phylogenetic relatives of Dehalococcoides ethenogenes. The ability of KB-1 to stimulate biodegradation of chlorinated ethenes in situ was explored using a closed loop recirculation cell with a pore volume of approximately 64 000 L. The pilot test area (PTA) groundwater was first amended with methanol and ac...

Fouling of Microfiltration and Ultrafiltration Membranes by Natural Waters

Abstract: Membrane filtration (microfiltration and ultrafiltration) has become an accepted process for drinking water treatment, but membrane fouling remains a significant problem. The objective of this study was to systematically investigate the mechanisms and components in natural waters that contribute to fouling. Natural waters from five sources were filtered in a benchtop filtration system. A sequential filtration process was used in most experiments. The first filtration steps removed specific components from the water, and the latter filtration steps investigated membrane fouling by the remaining components. Particulate matter (larger than 0.45 microm) was relatively unimportant in fouling as compared to dissolved matter. Very small colloids, ranging from about 3-20 nm in diameter, appeared to be important membrane foulants based on this experimental protocol. The colloidal foulants included both inorganic and organic matter, but the greatest fraction of material was organic. When the colloidal fraction of material was removed, the remaining dissolved organic matter (DOM), which was smaller than about 3 nm and included about 85-90% of the total DOM, caused very little fouling. Thus, although other studies have identified DOM as a major foulant during filtration of natural waters, this work shows that a small fraction of DOM may be responsible for fouling. Adsorption was demonstrated to be an important mechanism for fouling by colloids.