scispace - formally typeset
Search or ask a question

Showing papers in "Environmental Science & Technology in 2016"


Journal ArticleDOI
TL;DR: The uptake and tissue accumulation of polystyrene microplastics in zebrafish were detected, and the toxic effects in liver were investigated, showing that both 5 μm and 70 nm PS-MPs caused inflammation and lipid accumulation in fish liver.
Abstract: Microplastics have become emerging contaminants, causing widespread concern about their potential toxic effects. In this study, the uptake and tissue accumulation of polystyrene microplastics (PS-MPs) in zebrafish were detected, and the toxic effects in liver were investigated. The results showed that after 7 days of exposure, 5 μm diameter MPs accumulated in fish gills, liver, and gut, while 20 μm diameter MPs accumulated only in fish gills and gut. Histopathological analysis showed that both 5 μm and 70 nm PS-MPs caused inflammation and lipid accumulation in fish liver. PS-MPs also induced significantly increased activities of superoxide dismutase and catalase, indicating that oxidative stress was induced after treatment with MPs. In addition, metabolomic analysis suggested that exposure to MPs induced alterations of metabolic profiles in fish liver and disturbed the lipid and energy metabolism. These findings provide new insights into the toxic effects of MPs on fish.

1,244 citations


Journal ArticleDOI
TL;DR: This study shows that despite the efficient removal rates of MP achieved by this modern treatment plant when dealing with such a large volume of effluent even a modest amount of microplastics being released per liter of Effluent could result in significant amounts of micro Plastics entering the environment.
Abstract: Municipal effluent discharged from wastewater treatment works (WwTW) is suspected to be a significant contributor of microplastics (MP) to the environment as many personal care products contain plastic microbeads. A secondary WwTW (population equivalent 650 000) was sampled for microplastics at different stages of the treatment process to ascertain at what stage in the treatment process the MP are being removed. The influent contained on average 15.70 (±5.23) MP·L–1. This was reduced to 0.25 (±0.04) MP·L–1 in the final effluent, a decrease of 98.41%. Despite this large reduction we calculate that this WwTW is releasing 65 million microplastics into the receiving water every day. A significant proportion of the microplastic accumulated in and was removed during the grease removal stage (19.67 (±4.51) MP/2.5 g), it was only in the grease that the much publicised microbeads were found. This study shows that despite the efficient removal rates of MP achieved by this modern treatment plant when dealing with su...

1,191 citations


Journal ArticleDOI
TL;DR: Overall the flux of HOCs bioaccumulated from natural prey overwhelms the flux from ingested microplastics for most habitats, which implies that microplastic ingestion is not likely to increase the exposure to and thus risks of H OCs in the marine environment.
Abstract: The hypothesis that ‘microplastic will transfer hazardous hydrophobic organic chemicals (HOC) to marine animals’ has been central to the perceived hazard and risk of plastic in the marine environment. The hypothesis is often cited and has gained momentum, turning it into paradigm status. We provide a critical evaluation of the scientific literature regarding this hypothesis. Using new calculations based on published studies, we explain the sometimes contrasting views and unify them in one interpretive framework. One explanation for the contrasting views among studies is that they test different hypotheses. When reframed in the context of the above hypothesis, the available data become consistent. We show that HOC microplastic-water partitioning can be assumed to be at equilibrium for most microplastic residing in the oceans. We calculate the fraction of total HOC sorbed by plastics to be small compared to that sorbed by other media in the ocean. We further demonstrate consistency among (a) measured HOC tr...

978 citations


Journal ArticleDOI
TL;DR: In this paper, a review of the current state of knowledge on the occurrence of bisphenol analogues (other than BPA) in the environment, consumer products and foodstuffs, human exposure and biomonitoring, and toxicity.
Abstract: Numerous studies have investigated the environmental occurrence, human exposure, and toxicity of bisphenol A (BPA). Following stringent regulations on the production and usage of BPA, several bisphenol analogues have been produced as a replacement for BPA in various applications. The present review outlines the current state of knowledge on the occurrence of bisphenol analogues (other than BPA) in the environment, consumer products and foodstuffs, human exposure and biomonitoring, and toxicity. Whereas BPA was still the major bisphenol analogue found in most environmental monitoring studies, BPF and BPS were also frequently detected. Elevated concentrations of BPAF, BPF, and BPS (i.e., similar to or greater than that of BPA) have been reported in the abiotic environment and human urine from some regions. Many analogues exhibit endocrine disrupting effects, cytotoxicity, genotoxicity, reproductive toxicity, dioxin-like effects, and neurotoxicity in laboratory studies. BPAF, BPB, BPF, and BPS have been show...

968 citations


Journal ArticleDOI
TL;DR: It is suggested that widespread application of sewage sludge from municipal wastewater treatment plants (WWTPs) to farmlands is likely to represent a major input of MPs to agricultural soils, with unknown consequences for sustainability and food security.
Abstract: D to their ubiquitous distribution and chemical composition, microplastics (MPs) are increasingly being recognized as a global concern. While it is widely acknowledged thatMPs in the ocean are a serious issue with potentially negative effects onmarine organisms, information aboutMPs in terrestrial and freshwater environments is fragmentary. Based on new MP emission estimates in industrialized countries, we suggest that widespread application of sewage sludge frommunicipal wastewater treatment plants (WWTPs) to farmlands is likely to represent a major input of MPs to agricultural soils, with unknown consequences for sustainability and food security. Terrestrial emissions are the dominant source of MPs, including those conveyed to receiving waters by WWTP outfalls. Recent reports based on product life cycle data offer the first quantitative insights into national MP emission inventories. MPs originate predominantly from automobile tire wear, household and laundry dust, industrial processes (e.g., blasting and deflashing of plastics), and through deterioration of surfaces made of or coated with plastic, for example, artificial turf and polymeric paint. Most of these emissions occur in urban and residential areas. In developed regions, municipal/industrial effluents and even diffuse urban runoff are eventually conveyed to WWTPs. During wastewater treatment, over 90% of MPs are retained in sewage sludge. Effectiveness of MP retention is dependent on particle density and size. MPs with a density greater than water are almost completely retained in sewage sludge during primary and secondary treatment. Tertiary filtration treatment effectively removes larger floating particles, while smaller and lighter particles, expectedly, are released with wastewater effluents. The use of sewage sludge as fertilizer for agricultural applications is often economically advantageous and is common in many developed regions. In Europe and North America about 50% of sewage sludge is processed for agricultural use. Using national data on farm areas, population and sewage sludge fate (http://ec.europa.eu/eurostat), with estimates of MP emissions and applying broad but conservative uncertainty ranges, we estimate that between 125 and 850 tons MP/million inhabitants are added annually to European agricultural soils either through direct application of sewage sludge or as processed biosolids. This is at least equal to, and probably much higher than our estimate of 110 to 180 tons MP/million inhabitants emitted annually to surface waters based on refs 1−3. In Europe, in fact, between 1270 and 2130 tons MPs/million inhabitants are released to urban environments, annually. Conservatively assuming that 10−90% of MPs produced from road wear and debris from building coating are collected by sewers, between 360 and 1980 tons MPs are expected to reach municipal WWTPs. Here, an uncertain fraction of MPs from car tire debris (conservatively, 20−80%) and >90% of MPs from personal care products are likely to be retained in sludge, giving a total input of between 250 and 1700 tons/million inhabitants each year. Sludge application to agricultural land was calculated as the sum of direct application and application of processed biosolids, excluding the fraction of wastewater sludge incinerated, disposed in landfills or subject to other nonagricultural uses. These figures are highly conservative as sludge is only ever applied to a small percentage of agricultural land. There is a broad range of sludge application rates and intensities to European agricultural land (Figure 1). Application rates (estimated as compost plus direct application) range from 0 to 91%, with an average of 43%. This equates to average and maximum areal per-capita loadings of 0.2 and 8 mg MP/ha/yr. MPs inputs estimated here possibly reflect the situation in other countries with similar socioeconomic conditions and/or similar use of plastics (e.g., in Asia and the Americas). A rough extrapolation from data in refs 1−3 produces a total yearly input of 63 000−430 000 and 44 000−300 000 tons MPs to European and North American farmlands, respectively. This would be an alarmingly high input. Comprehensively, this exceeds the total accumulated burden of 93 000−236 000 tons MPs currently estimated to be present in surface water in the global oceans.

920 citations


Journal ArticleDOI
TL;DR: Research shows that NZVI-based materials have satisfactory removal capacities for heavy metal ions and play an important role in the environmental pollution cleanup.
Abstract: The presence of heavy metals in the industrial effluents has recently been a challenging issue for human health. Efficient removal of heavy metal ions from environment is one of the most important issues from biological and environmental point of view, and many studies have been devoted to investigate the environmental behavior of nanoscale zerovalent iron (NZVI) for the removal of toxic heavy metal ions, present both in the surface and underground wastewater. The aim of this review is to show the excellent removal capacity and environmental remediation of NZVI-based materials for various heavy metal ions. A new look on NZVI-based materials (e.g., modified or matrix-supported NZVI materials) and possible interaction mechanism (e.g., adsorption, reduction and oxidation) and the latest environmental application. The effects of various environmental conditions (e.g., pH, temperature, coexisting oxy-anions and cations) and potential problems for the removal of heavy metal ions on NZVI-based materials with the...

898 citations


Journal ArticleDOI
TL;DR: This approach demonstrates that the addition of even sparse ground-based measurements to more globally continuous PM2.5 data sources can yield valuable improvements to PM 2.5 characterization on a global scale.
Abstract: We estimated global fine particulate matter (PM2.5) concentrations using information from satellite-, simulation- and monitor-based sources by applying a Geographically Weighted Regression (GWR) to global geophysically based satellite-derived PM2.5 estimates. Aerosol optical depth from multiple satellite products (MISR, MODIS Dark Target, MODIS and SeaWiFS Deep Blue, and MODIS MAIAC) was combined with simulation (GEOS-Chem) based upon their relative uncertainties as determined using ground-based sun photometer (AERONET) observations for 1998-2014. The GWR predictors included simulated aerosol composition and land use information. The resultant PM2.5 estimates were highly consistent (R(2) = 0.81) with out-of-sample cross-validated PM2.5 concentrations from monitors. The global population-weighted annual average PM2.5 concentrations were 3-fold higher than the 10 μg/m(3) WHO guideline, driven by exposures in Asian and African regions. Estimates in regions with high contributions from mineral dust were associated with higher uncertainty, resulting from both sparse ground-based monitoring, and challenging conditions for retrieval and simulation. This approach demonstrates that the addition of even sparse ground-based measurements to more globally continuous PM2.5 data sources can yield valuable improvements to PM2.5 characterization on a global scale.

881 citations


Journal ArticleDOI
TL;DR: In this paper, the authors combined satellite-based estimates, chemical transport model simulations, and ground measurements from 79 different countries to produce global estimates of annual average fine particle (PM2.5) and ozone concentrations at 0.1° × 0. 1° spatial resolution for five-year intervals from 1990 to 2010 and the year 2013.
Abstract: Exposure to ambient air pollution is a major risk factor for global disease. Assessment of the impacts of air pollution on population health and evaluation of trends relative to other major risk factors requires regularly updated, accurate, spatially resolved exposure estimates. We combined satellite-based estimates, chemical transport model simulations, and ground measurements from 79 different countries to produce global estimates of annual average fine particle (PM2.5) and ozone concentrations at 0.1° × 0.1° spatial resolution for five-year intervals from 1990 to 2010 and the year 2013. These estimates were applied to assess population-weighted mean concentrations for 1990-2013 for each of 188 countries. In 2013, 87% of the world's population lived in areas exceeding the World Health Organization Air Quality Guideline of 10 μg/m(3) PM2.5 (annual average). Between 1990 and 2013, global population-weighted PM2.5 increased by 20.4% driven by trends in South Asia, Southeast Asia, and China. Decreases in population-weighted mean concentrations of PM2.5 were evident in most high income countries. Population-weighted mean concentrations of ozone increased globally by 8.9% from 1990-2013 with increases in most countries-except for modest decreases in North America, parts of Europe, and several countries in Southeast Asia.

854 citations


Journal ArticleDOI
TL;DR: In vitro tests revealed that antioxidant-related enzymes and MAPK signaling pathways were significantly activated in response to microplastic exposure in a size-dependent manner, suggesting that 6-μm microbeads are more effectively egested from B. koreanus than 0.05- or 0.5- μm microBeads.
Abstract: In this study, we evaluated accumulation and adverse effects of ingestion of microplastics in the monogonont rotifer (Brachionus koreanus). The dependence of microplastic toxicity on particle size was investigated by measuring several in vivo end points and studying the ingestion and egestion using 0.05-, 0.5-, and 6-μm nonfunctionalized polystyrene microbeads. To identify the defense mechanisms activated in response to microplastic exposure, the activities of several antioxidant-related enzymes and the phosphorylation status of mitogen-activated protein kinases (MAPKs) were determined. Exposure to polystyrene microbeads of all sizes led to significant size-dependent effects, including reduced growth rate, reduced fecundity, decreased lifespan and longer reproduction time. Rotifers exposed to 6-μm fluorescently labeled microbeads exhibited almost no fluorescence after 24 h, while rotifers exposed to 0.05- and 0.5-μm fluorescently labeled microbeads displayed fluorescence until 48 h, suggesting that 6-μm microbeads are more effectively egested from B. koreanus than 0.05- or 0.5-μm microbeads. This observation provides a potential explanation for our findings that microbead toxicity was size-dependent and smaller microbeads were more toxic. In vitro tests revealed that antioxidant-related enzymes and MAPK signaling pathways were significantly activated in response to microplastic exposure in a size-dependent manner.

782 citations


Journal ArticleDOI
TL;DR: This study studied the survival and fitness of the earthworm Lumbricus terrestris exposed to microplastics in litter at concentrations of 7, 28, 45, and 60% dry weight, percentages that, after bioturbation, translate to 0.2 to 1.2% in bulk soil.
Abstract: Plastic debris is widespread in the environment, but information on the effects of microplastics on terrestrial fauna is completely lacking. Here, we studied the survival and fitness of the earthworm Lumbricus terrestris (Oligochaeta, Lumbricidae) exposed to microplastics (Polyethylene, <150 μm) in litter at concentrations of 7, 28, 45, and 60% dry weight, percentages that, after bioturbation, translate to 0.2 to 1.2% in bulk soil. Mortality after 60 days was higher at 28, 45, and 60% of microplastics in the litter than at 7% w/w and in the control (0%). Growth rate was significantly reduced at 28, 45, and 60% w/w microplastics, compared to the 7% and control treatments. Due to the digestion of ingested organic matter, microplastic was concentrated in cast, especially at the lowest dose (i.e., 7% in litter) because that dose had the highest proportion of digestible organic matter. Whereas 50 percent of the microplastics had a size of <50 μm in the original litter, 90 percent of the microplastics in the casts was <50 μm in all treatments, which suggests size-selective egestion by the earthworms. These concentration-transport and size-selection mechanisms may have important implications for fate and risk of microplastic in terrestrial ecosystems.

754 citations


Journal ArticleDOI
TL;DR: It is found that numerous long-term studies of lake ecosystems in Europe and North America show that controlling algal blooms and other symptoms of eutrophication depends on reducing inputs of a single nutrient: phosphorus.
Abstract: As human populations increase and land-use intensifies, toxic and unsightly nuisance blooms of algae are becoming larger and more frequent in freshwater lakes. In most cases, the blooms are predominantly blue-green algae (Cyanobacteria), which are favored by low ratios of nitrogen to phosphorus. In the past half century, aquatic scientists have devoted much effort to understanding the causes of such blooms and how they can be prevented or reduced. Here we review the evidence, finding that numerous long-term studies of lake ecosystems in Europe and North America show that controlling algal blooms and other symptoms of eutrophication depends on reducing inputs of a single nutrient: phosphorus. In contrast, small-scale experiments of short duration, where nutrients are added rather than removed, often give spurious and confusing results that bear little relevance to solving the problem of cyanobacteria blooms in lakes.

Journal ArticleDOI
TL;DR: The results from municipal waste samples and soil samples collected from an industrial area demonstrated that the PFE method is a promising alternative for determining the concentration and identity of microplastics in environmental samples.
Abstract: A method based on pressurized fluid extraction (PFE) was developed for measuring microplastics in environmental samples This method can address some limitations of the current microplastic methods and provide laboratories with a simple analytical method for quantifying common microplastics in a range of environmental samples The method was initially developed by recovering 101% to 111% of spiked plastics on glass beads and was then applied to a composted municipal waste sample with spike recoveries ranging from 85% to 94% The results from municipal waste samples and soil samples collected from an industrial area demonstrated that the method is a promising alternative for determining the concentration and identity of microplastics in environmental samples

Journal ArticleDOI
TL;DR: This critical review discusses the drivers, incentives, technologies, and environmental impacts of zero liquid discharge, and highlights the evolution of ZLD from thermal- to membrane-based processes, and analyzes the advantages and limitations of existing and emerging ZLD technologies.
Abstract: Zero liquid discharge (ZLD)—a wastewater management strategy that eliminates liquid waste and maximizes water usage efficiency — has attracted renewed interest worldwide in recent years. Although implementation of ZLD reduces water pollution and augments water supply, the technology is constrained by high cost and intensive energy consumption. In this critical review, we discuss the drivers, incentives, technologies, and environmental impacts of ZLD. Within this framework, the global applications of ZLD in the United States and emerging economies such as China and India are examined. We highlight the evolution of ZLD from thermal- to membrane-based processes, and analyze the advantages and limitations of existing and emerging ZLD technologies. The potential environmental impacts of ZLD, notably greenhouse gas emission and generation of solid waste, are discussed and the prospects of ZLD technologies and research needs are highlighted.

Journal ArticleDOI
Yong Feng1, Deli Wu2, Yu Deng1, Tong Zhang1, Kaimin Shih1 
TL;DR: Copper-iron bimetallic oxides have shown great potential for powerful radical production by activating peroxides and CuFeO2 rhombohedral crystals were synthesized and used as heterogeneous catalysts for peroxymonosulfate (PMS) activation under various conditions.
Abstract: Copper–iron bimetallic oxides have shown great potential for powerful radical production by activating peroxides. In this work, CuFeO2 rhombohedral crystals (RCs) were synthesized and used as heterogeneous catalysts for peroxymonosulfate (PMS) activation under various conditions. Sulfadiazine, a widely used veterinary sulfonamide, was used as a target pollutant to evaluate the efficiency of this combination. The results showed that of all the catalysts tested, the CuFeO2 RCs had the greatest reactivity. Under conditions of 0.1 g L–1 CuFeO2 RCs and 33.0 μM PMS, the nearly complete degradation of sulfadiazine occurred within 24 min. A synergistic catalytic effect was found between solid Cu(I) and Fe(III), probably due to the accelerated reduction of Fe(III). The two activation stages that produced different radicals (hydroxyl radicals followed by sulfate radicals) existed when solid Cu(I) was used as the catalyst. The CuFeO2 RCs had a higher PMS utilization efficiency than CuFe2O4, probably because the Cu(I...

Journal ArticleDOI
TL;DR: Results indicate that radical intermediates such as sulfate radical anion and hydroxyl radical are not majorly responsible for this persulfate-driven oxidation of organic compounds, and suggest that G-ND plays a critical role in mediating facile electron transfer from phenol to persulfates.
Abstract: This study introduces graphited nanodiamond (G-ND) as an environmentally friendly, easy-to-regenerate, and cost-effective alternative catalyst to activate persulfate (i.e., peroxymonosulfate (PMS) and peroxydisulfate (PDS)) and oxidize organic compounds in water. The G-ND was found to be superior for persulfate activation to other benchmark carbon materials such as graphite, graphene, fullerene, and carbon nanotubes. The G-ND/persulfate showed selective reactivity toward phenolic compounds and some pharmaceuticals, and the degradation kinetics were not inhibited by the presence of oxidant scavengers and natural organic matter. These results indicate that radical intermediates such as sulfate radical anion and hydroxyl radical are not majorly responsible for this persulfate-driven oxidation of organic compounds. The findings from linear sweep voltammetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectroscopy analyses suggest that the both pers...

Journal ArticleDOI
TL;DR: It is shown that MHV and ϕ6 remained infective on the time scale of days and the presented methods will enable future research on enveloped viruses in water environments.
Abstract: Many of the devastating pandemics and outbreaks of the 20th and 21st centuries have involved enveloped viruses, including influenza, HIV, SARS, MERS, and Ebola. However, little is known about the presence and fate of enveloped viruses in municipal wastewater. Here, we compared the survival and partitioning behavior of two model enveloped viruses (MHV and ϕ6) and two nonenveloped bacteriophages (MS2 and T3) in raw wastewater samples. We showed that MHV and ϕ6 remained infective on the time scale of days. Up to 26% of the two enveloped viruses adsorbed to the solid fraction of wastewater compared to 6% of the two nonenveloped viruses. Based on this partitioning behavior, we assessed and optimized methods for recovering enveloped viruses from wastewater. Our optimized ultrafiltration method resulted in mean recoveries (±SD) of 25.1% (±3.6%) and 18.2% (±9.5%) for the enveloped MHV and ϕ6, respectively, and mean recoveries of 55.6% (±16.7%) and 85.5% (±24.5%) for the nonenveloped MS2 and T3, respectively. A ma...

Journal ArticleDOI
TL;DR: Managers should consider whether balanced control of N and P will most effectively reduce HABs along the freshwater-marine continuum, supported by studies indicating that biological N fixation cannot always meet lake ecosystem N needs, and that anthropogenic N andP loading has increased dramatically in recent decades.
Abstract: Preventing harmful algal blooms (HABs) is needed to protect lakes and downstream ecosystems. Traditionally, reducing phosphorus (P) inputs was the prescribed solution for lakes, based on the assumption that P universally limits HAB formation. Reduction of P inputs has decreased HABs in many lakes, but was not successful in others. Thus, the “P-only” paradigm is overgeneralized. Whole-lake experiments indicate that HABs are often stimulated more by combined P and nitrogen (N) enrichment rather than N or P alone, indicating that the dynamics of both nutrients are important for HAB control. The changing paradigm from P-only to consideration of dual nutrient control is supported by studies indicating that (1) biological N fixation cannot always meet lake ecosystem N needs, and (2) that anthropogenic N and P loading has increased dramatically in recent decades. Sediment P accumulation supports long-term internal loading, while N may escape via denitrification, leading to perpetual N deficits. Hence, controllin...

Journal ArticleDOI
TL;DR: The quantity and morphology of floating micro- and macroplastics in 29 Great Lakes tributaries in six states under different land covers, wastewater effluent contributions, population densities, and hydrologic conditions are characterized.
Abstract: Plastic debris is a growing contaminant of concern in freshwater environments, yet sources, transport, and fate remain unclear. This study characterized the quantity and morphology of floating micro- and macroplastics in 29 Great Lakes tributaries in six states under different land covers, wastewater effluent contributions, population densities, and hydrologic conditions. Tributaries were sampled three or four times each using a 333 μm mesh neuston net. Plastic particles were sorted by size, counted, and categorized as fibers/lines, pellets/beads, foams, films, and fragments. Plastics were found in all 107 samples, with a maximum concentration of 32 particles/m3 and a median of 1.9 particles/m3. Ninety-eight percent of sampled plastic particles were less than 4.75 mm in diameter and therefore considered microplastics. Fragments, films, foams, and pellets/beads were positively correlated with urban-related watershed attributes and were found at greater concentrations during runoff-event conditions. Fibers,...

Journal ArticleDOI
TL;DR: This article provides a comprehensive overview of the range of benefits of recovering P from waste streams, i.e., the total value of recovered P, as well as other assets that are associated with P and can be recovered in parallel, such as energy, nitrogen, metals and minerals, and water.
Abstract: Phosphorus (P) is a critical, geographically concentrated, nonrenewable resource necessary to support global food production. In excess (e.g., due to runoff or wastewater discharges), P is also a primary cause of eutrophication. To reconcile the simultaneous shortage and overabundance of P, lost P flows must be recovered and reused, alongside improvements in P-use efficiency. While this motivation is increasingly being recognized, little P recovery is practiced today, as recovered P generally cannot compete with the relatively low cost of mined P. Therefore, P is often captured to prevent its release into the environment without beneficial recovery and reuse. However, additional incentives for P recovery emerge when accounting for the total value of P recovery. This article provides a comprehensive overview of the range of benefits of recovering P from waste streams, i.e., the total value of recovering P. This approach accounts for P products, as well as other assets that are associated with P and can be recovered in parallel, such as energy, nitrogen, metals and minerals, and water. Additionally, P recovery provides valuable services to society and the environment by protecting and improving environmental quality, enhancing efficiency of waste treatment facilities, and improving food security and social equity. The needs to make P recovery a reality are also discussed, including business models, bottlenecks, and policy and education strategies.

Journal ArticleDOI
TL;DR: The results support the proposal that sinking faecal matter represents a mechanism by which floating plastics can be vertically transported away from surface waters and facilitate the transfer of plastics to coprophagous biota.
Abstract: Plastic debris is a widespread contaminant, prevalent in aquatic ecosystems across the globe. Zooplankton readily ingest microscopic plastic (microplastic, < 1 mm), which are later egested within their faecal pellets. These pellets are a source of food for marine organisms, and contribute to the oceanic vertical flux of particulate organic matter as part of the biological pump. The effects of microplastics on faecal pellet properties are currently unknown. Here we test the hypotheses that (1) faecal pellets are a vector for transport of microplastics, (2) polystyrene microplastics can alter the properties and sinking rates of zooplankton egests and, (3) faecal pellets can facilitate the transfer of plastics to coprophagous biota. Following exposure to 20.6 μm polystyrene microplastics (1000 microplastics mL–1) and natural prey (∼1650 algae mL–1) the copepod Calanus helgolandicus egested faecal pellets with significantly (P < 0.001) reduced densities, a 2.25-fold reduction in sinking rates, and a higher pr...

Journal ArticleDOI
TL;DR: The flows to the environment that these ENM provide will constitute the most accurate and reliable input of masses for environmental fate models which are using process-based descriptions of the fate and behavior of ENM in natural systems and rely on accurate mass input parameters.
Abstract: The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental concentrations. Despite significant advances in analytical methods, it is still not possible to measure the concentrations of ENM in natural systems. Material flow and environmental fate models have been used to provide predicted environmental concentrations. However, almost all current models are static and consider neither the rapid development of ENM production nor the fact that many ENM are entering an in-use stock and are released with a lag phase. Here we use dynamic probabilistic material flow modeling to predict the flows of four ENM (nano-TiO2, nano-ZnO, nano-Ag and CNT) to the environment and to quantify their amounts in (temporary) sinks such as the in-use stock and (“final”) environmental sinks such as soil and sediment. Caused by the increase in production, the concentrations of all ENM in all compartments are increasing. Nano-TiO2 had far higher concentrations...

Journal ArticleDOI
TL;DR: The adsorption mechanism of U(VI) and Eu(III) on carbonaceous nanofibers (CNFs) was investigated using batch, IR, XPS, XANES, and EXAFS techniques and played an important role in the removal of radionuclides on inexpensive and available carbon-based nanoparticles in environmental cleanup applications.
Abstract: The adsorption mechanism of U(VI) and Eu(III) on carbonaceous nanofibers (CNFs) was investigated using batch, IR, XPS, XANES, and EXAFS techniques. The pH-dependent adsorption indicated that the adsorption of U(VI) on the CNFs was significantly higher than the adsorption of Eu(III) at pH < 7.0. The maximum adsorption capacity of the CNFs calculated from the Langmuir model at pH 4.5 and 298 K for U(VI) and Eu(III) were 125 and 91 mg/g, respectively. The CNFs displayed good recyclability and recoverability by regeneration experiments. Based on XPS and XANES analyses, the enrichment of U(VI) and Eu(III) was attributed to the abundant adsorption sites (e.g., −OH and −COOH groups) of the CNFs. IR analysis further demonstrated that −COOH groups were more responsible for U(VI) adsorption. In addition, the remarkable reducing agents of the R-CH2OH groups were responsible for the highly efficient adsorption of U(VI) on the CNFs. The adsorption mechanism of U(VI) on the CNFs at pH 4.5 was shifted from inner- to out...

Journal ArticleDOI
TL;DR: A stoichiometric and thermodynamic model is delved into that sheds light on the effect of substrate ratios and environmental conditions on product formation and was reviewed to bring together research from different fields.
Abstract: Chain elongation into medium-chain carboxylates, such as n-caproate and n-caprylate, with ethanol as an electron donor and with open cultures of microbial consortia (i.e., reactor microbiomes) under anaerobic conditions is being developed as a biotechnological production platform. The goal is to use the high thermodynamic efficiency of anaerobic fermentation to convert organic biomass or organic wastes into valuable biochemicals that can be extracted. Several liter-scale studies have been completed and a first pilot-plant study is underway. However, the underlying microbial pathways are not always well understood. In addition, an interdisciplinary approach with knowledge from fields ranging from microbiology and chemical separations to biochemistry and environmental engineering is required. To bring together research from different fields, we reviewed the literature starting with the microbiology and ending with the bioprocess engineering studies that already have been performed. Because understanding the microbial pathways is so important to predict and steer performance, we delved into a stoichiometric and thermodynamic model that sheds light on the effect of substrate ratios and environmental conditions on product formation. Finally, we ended with an outlook.

Journal ArticleDOI
TL;DR: This critical review aims to highlight the development of carbon-based solid sorbents for postcombustion CO2 capture and touches upon the recent progress made to develop metal organic frameworks (MOFs) and carbon nanomaterials and their general CO2 sorption potential.
Abstract: The persistent increase in atmospheric CO2 from anthropogenic sources makes research directed toward carbon capture and storage imperative. Current liquid amine absorption technology has several drawbacks including hazardous byproducts and a high-energy requirement for regeneration; therefore, research is ongoing to develop more practical methods for capturing CO2 in postcombustion scenarios. The unique properties of carbon-based materials make them specifically promising for CO2 adsorption at low temperature and moderate to high partial pressure. This critical review aims to highlight the development of carbon-based solid sorbents for postcombustion CO2 capture. Specifically, it provides an overview of postcombustion CO2 capture processes with solid adsorbents and discusses a variety of carbon-based materials that could be used. This review focuses on low-cost pyrogenic carbon, activated carbon (AC), and metal–carbon composites for CO2 capture. Further, it touches upon the recent progress made to develop...

Journal ArticleDOI
TL;DR: This model uses convolutional layers, which aggregate neighboring information, into a neural network to account for spatial and temporal autocorrelation and allows epidemiologists to access PM2.5 exposure in both the short-term and the long-term.
Abstract: A number of models have been developed to estimate PM2.5 exposure, including satellite-based aerosol optical depth (AOD) models, land-use regression, or chemical transport model simulation, all with both strengths and weaknesses. Variables like normalized difference vegetation index (NDVI), surface reflectance, absorbing aerosol index, and meteoroidal fields are also informative about PM2.5 concentrations. Our objective is to establish a hybrid model which incorporates multiple approaches and input variables to improve model performance. To account for complex atmospheric mechanisms, we used a neural network for its capacity to model nonlinearity and interactions. We used convolutional layers, which aggregate neighboring information, into a neural network to account for spatial and temporal autocorrelation. We trained the neural network for the continental United States from 2000 to 2012 and tested it with left out monitors. Ten-fold cross-validation revealed a good model performance with a total R2 of 0....

Journal ArticleDOI
TL;DR: A thorough physicochemical characterization of samples collected from the North Artlantic subtropical gyre during the sea campaign Expedition seventh Continent found that the smaller microplastics, the cubic ones mostly, are fragmented much faster than the parallelepipeds.
Abstract: The global estimation of microplastic afloat in the ocean is only approximately 1% of annual global plastic inputs. This reflects fundamental knowledge gaps in the transformation, fragmentation, and fates of microplastics in the ocean. In order to better understand microplastic fragmentation we proceeded to a thorough physicochemical characterization of samples collected from the North Artlantic subtropical gyre during the sea campaign Expedition seventh Continent in May 2014. The results were confronted with a mathematical approach. The introduction of mass distribution in opposition to the size distribution commonly proposed in this area clarify the fragmentation pattern. The mathematical analysis of the mass distribution points out a lack of debris with mass lighter than 1 mg. Characterization by means of microscopy, microtomography, and infrared microscopy gives a better understanding of the behavior of microplastic at sea. Flat pieces of debris (2 to 5 mm in length) typically have one face that is more photodegraded (due to exposure to the sun) and the other with more biofilm, suggesting that they float in a preferred orientation. Smaller debris, with a cubic shape (below 2 mm), seems to roll at sea. All faces are evenly photodegraded and they are less colonized. The breakpoint in the mathematical model and the experimental observation around 2 mm leads to the conclusion that there is a discontinuity in the rate of fragmentation: we hypothesized that the smaller microplastics, the cubic ones mostly, are fragmented much faster than the parallelepipeds.

Journal ArticleDOI
TL;DR: For minimizing the trade-off relationship between As and Cd in rice grains in the field investigated, water management strategies should target the realization of optimal soil Eh of -73 mV and pH of 6.2 during the 3 weeks after heading.
Abstract: Arsenic (As) and cadmium (Cd) concentrations in rice grains are a human health concern. We conducted field experiments to investigate optimal conditions of Eh and pH in soil for simultaneously decreasing As and Cd accumulation in rice. Water managements in the experiments, which included continuous flooding and intermittent irrigation with different intervals after midseason drainage, exerted striking effects on the dissolved As and Cd concentrations in soil through changes in Eh, pH, and dissolved Fe(II) concentrations in the soil. Intermittent irrigation with three-day flooding and five-day drainage was found to be effective for simultaneously decreasing the accumulation of As and Cd in grain. The grain As and Cd concentrations were, respectively, linearly related to the average dissolved As and Cd concentrations during the 3 weeks after heading. We propose a new indicator for expressing the degree to which a decrease in the dissolved As or Cd concentration is compromised by the increase in the other. F...

Journal ArticleDOI
TL;DR: Evidence is provided that MBs from personal care products are capable of transferring sorbed pollutants to fish that ingest them and that BDE-99 did not appear to bioaccumulate in the fish.
Abstract: The prevalence of microplastics (<5 mm) in natural environments has become a widely recognized global problem. Microplastics have been shown to sorb chemical pollutants from their surrounding environment, thus raising concern as to their role in the movement of these pollutants through the food chain. This experiment investigated whether organic pollutants sorbed to microbeads (MBs) from personal care products were assimilated by fish following particle ingestion. Rainbow fish (Melanotaenia fluviatilis) were exposed to MBs with sorbed polybrominated diphenyl ethers (PBDEs; BDE-28, -47, -100, -99, -153, -154, -183, 200 ng g(-1); BDE-209, 2000 ng g(-1)) and sampled at 0, 21, 42, and 63 days along with two control treatments (food only and food + clean MBs). Exposed fish had significantly higher Σ8PBDE concentrations than both control treatments after just 21 days, and continued exposure resulted in increased accumulation of the pollutants over the experiment (ca. 115 pg g(-1) ww d(-1)). Lower brominated congeners showed the highest assimilation whereas higher brominated congeners did not appear to transfer, indicating they may be too strongly sorbed to the plastic or unable to be assimilated by the fish due to large molecular size or other factors. Seemingly against this trend, however, BDE-99 did not appear to bioaccumulate in the fish, which may be due to partitioning from the MBs or it being metabolized in vivo. This work provides evidence that MBs from personal care products are capable of transferring sorbed pollutants to fish that ingest them.

Journal ArticleDOI
TL;DR: Findings suggest that thermal degradation byproducts are formed during vapor generation when e-cigarette vapor is present, and Glycidol and acrolein were primarily produced by glycerin degradation.
Abstract: Use of electronic cigarettes has grown exponentially over the past few years, raising concerns about harmful emissions. This study quantified potentially toxic compounds in the vapor and identified key parameters affecting emissions. Six principal constituents in three different refill "e-liquids" were propylene glycol (PG), glycerin, nicotine, ethanol, acetol, and propylene oxide. The latter, with mass concentrations of 0.4-0.6%, is a possible carcinogen and respiratory irritant. Aerosols generated with vaporizers contained up to 31 compounds, including nicotine, nicotyrine, formaldehyde, acetaldehyde, glycidol, acrolein, acetol, and diacetyl. Glycidol is a probable carcinogen not previously identified in the vapor, and acrolein is a powerful irritant. Emission rates ranged from tens to thousands of nanograms of toxicants per milligram of e-liquid vaporized, and they were significantly higher for a single-coil vs a double-coil vaporizer (by up to an order of magnitude for aldehydes). By increasing the voltage applied to a single-coil device from 3.3 to 4.8 V, the mass of e-liquid consumed doubled from 3.7 to 7.5 mg puff(-1) and the total aldehyde emission rates tripled from 53 to 165 μg puff(-1), with acrolein rates growing by a factor of 10. Aldehyde emissions increased by more than 60% after the device was reused several times, likely due to the buildup of polymerization byproducts that degraded upon heating. These findings suggest that thermal degradation byproducts are formed during vapor generation. Glycidol and acrolein were primarily produced by glycerin degradation. Acetol and 2-propen-1-ol were produced mostly from PG, while other compounds (e.g., formaldehyde) originated from both. Because emissions originate from reaction of the most common e-liquid constituents (solvents), harmful emissions are expected to be ubiquitous when e-cigarette vapor is present.

Journal ArticleDOI
TL;DR: It is found that many processes that are expected to influence PPCP uptake and accumulation have received little study, particularly rhizosphere interactions, in planta transformations, and physicochemical properties beyond lipophilicity (as measured by Kow).
Abstract: Crops irrigated with reclaimed wastewater or grown in biosolids-amended soils may take up pharmaceuticals and personal care product ingredients (PPCPs) through their roots. The uptake pathways followed by PPCPs and the propensity for these compounds to bioaccumulate in food crops are still not well understood. In this critical review, we discuss processes expected to influence root uptake of PPCPs, evaluate current literature on uptake of PPCPs, assess models for predicting plant uptake of these compounds, and provide recommendations for future research, highlighting processes warranting study that hold promise for improving mechanistic understanding of plant uptake of PPCPs. We find that many processes that are expected to influence PPCP uptake and accumulation have received little study, particularly rhizosphere interactions, in planta transformations, and physicochemical properties beyond lipophilicity (as measured by Kow). Data gaps and discrepancies in methodology and reporting have so far hindered d...