Showing papers in "IEEE Transactions on Power Electronics in 2014"

A Survey of Wide Bandgap Power Semiconductor Devices

Abstract: Wide bandgap semiconductors show superior material properties enabling potential power device operation at higher temperatures, voltages, and switching speeds than current Si technology. As a result, a new generation of power devices is being developed for power converter applications in which traditional Si power devices show limited operation. The use of these new power semiconductor devices will allow both an important improvement in the performance of existing power converters and the development of new power converters, accounting for an increase in the efficiency of the electric energy transformations and a more rational use of the electric energy. At present, SiC and GaN are the more promising semiconductor materials for these new power devices as a consequence of their outstanding properties, commercial availability of starting material, and maturity of their technological processes. This paper presents a review of recent progresses in the development of SiC- and GaN-based power semiconductor devices together with an overall view of the state of the art of this new device generation.

Overview of Dual-Active-Bridge Isolated Bidirectional DC–DC Converter for High-Frequency-Link Power-Conversion System

Abstract: High-frequency-link (HFL) power conversion systems (PCSs) are attracting more and more attentions in academia and industry for high power density, reduced weight, and low noise without compromising efficiency, cost, and reliability. In HFL PCSs, dual-active-bridge (DAB) isolated bidirectional dc-dc converter (IBDC) serves as the core circuit. This paper gives an overview of DAB-IBDC for HFL PCSs. First, the research necessity and development history are introduced. Second, the research subjects about basic characterization, control strategy, soft-switching solution and variant, as well as hardware design and optimization are reviewed and analyzed. On this basis, several typical application schemes of DAB-IBDC for HPL PCSs are presented in a worldwide scope. Finally, design recommendations and future trends are presented. As the core circuit of HFL PCSs, DAB-IBDC has wide prospects. The large-scale practical application of DAB-IBDC for HFL PCSs is expected with the recent advances in solid-state semiconductors, magnetic and capacitive materials, and microelectronic technologies.

A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer

Abstract: Starting from Tesla's principles of wireless power transfer a century ago, this critical review outlines recent magneto-inductive research activities on wireless power transfer with the transmission distance greater than the transmitter coil dimension. It summarizes the operating principles of a range of wireless power research into 1) the maximum power transfer and 2) the maximum energy efficiency principles. The differences and the implications of these two approaches are explained in terms of their energy efficiency and transmission distance capabilities. The differences between the system energy efficiency and the transmission efficiency are also highlighted. The review covers the two-coil systems, the four-coil systems, the systems with relay resonators and the wireless domino-resonator systems. Related issues including human exposure issues and reduction of winding resistance are also addressed. The review suggests that the use of the maximum energy efficiency principle in the two-coil systems is suitable for short-range rather than mid-range applications, the use of the maximum power transfer principle in the four-coil systems is good for maximizing the transmission distance, but is under a restricted system energy efficiency (<;50%); the use of the maximum energy efficiency principle in relay or domino systems may offer a good compromise for good system energy efficiency and transmission distance on the condition that relay resonators can be placed between the power source and the load.

Distributed Secondary Control for Islanded Microgrids—A Novel Approach

Abstract: This paper presents a novel approach to conceive the secondary control in droop-controlled microgrids (MGs). The conventional approach is based on restoring the frequency and amplitude deviations produced by the local droop controllers by using an MG central controller (MGCC). A distributed networked control system is used in order to implement a distributed secondary control (DSC), thus avoiding its implementation in MGCC. The proposed approach is not only able to restore frequency and voltage of the MG but also ensures reactive power sharing. The distributed secondary control does not rely on a central control, so that the failure of a single unit will not produce the fail down of the whole system. Experimental results are presented to show the feasibility of the DSC. The time latency and data drop-out limits of the communication systems are studied as well.

An Improved Droop Control Method for DC Microgrids Based on Low Bandwidth Communication With DC Bus Voltage Restoration and Enhanced Current Sharing Accuracy

Abstract: Droop control is the basic control method for load current sharing in dc microgrid applications. The conventional dc droop control method is realized by linearly reducing the dc output voltage as the output current increases. This method has two limitations. First, with the consideration of line resistance in a droop-controlled dc microgrid, since the output voltage of each converter cannot be exactly the same, the output current sharing accuracy is degraded. Second, the dc-bus voltage deviation increases with the load due to the droop action. In this paper, in order to improve the performance of the dc microgrid operation, a low-bandwidth communication (LBC)-based improved droop control method is proposed. In contrast with the conventional approach, the control system does not require a centralized secondary controller. Instead, it uses local controllers and the LBC network to exchange information between converter units. The droop controller is employed to achieve independent operation, and the average voltage and current controllers are used in each converter to simultaneously enhance the current sharing accuracy and restore the dc bus voltage. All of the controllers are realized locally, and the LBC system is only used for changing the values of the dc voltage and current. Hence, a decentralized control scheme is accomplished. The simulation test based on MATLAB/Simulink and the experimental validation based on a 2 × 2.2 kW prototype were implemented to demonstrate the proposed approach.

Self-Synchronized Synchronverters: Inverters Without a Dedicated Synchronization Unit

Abstract: A synchronverter is an inverter that mimics synchronous generators, which offers a mechanism for power systems to control grid-connected renewable energy and facilitates smart grid integration. Similar to other grid-connected inverters, it needs a dedicated synchronization unit, e.g., a phase-locked loop (PLL), to provide the phase, frequency, and amplitude of the grid voltage as references. In this paper, a radical step is taken to improve the synchronverter as a self-synchronized synchronverter by removing the dedicated synchronization unit. It can automatically synchronize itself with the grid before connection and track the grid frequency after connection. This considerably improves the performance, reduces the complexity, and computational burden of the controller. All the functions of the original synchronverter, such as frequency and voltage regulation, real power, and reactive power control, are maintained. Both simulation and experimental results are presented to validate the control strategy. Experimental results have shown that the proposed control strategy can improve the performance of frequency tracking by more than 65%, the performance of real power control by 83%, and the performance of reactive power control by about 70%.

Impedance Modeling and Analysis of Grid-Connected Voltage-Source Converters

Abstract: This paper presents small-signal impedance modeling of grid-connected three-phase converters for wind and solar system stability analysis. In the proposed approach, a converter is modeled by a positive-sequence and a negative-sequence impedance directly in the phase domain. It is further demonstrated that the two sequence subsystems are decoupled under most conditions and can be studied independently from each other. The proposed models are verified by experimental measurements and their applications are demonstrated in a system testbed.

Supervisory Control of an Adaptive-Droop Regulated DC Microgrid With Battery Management Capability

Abstract: DC power systems are gaining an increasing interest in renewable energy applications because of the good matching with dc output type sources such as photovoltaic (PV) systems and secondary batteries. In this paper, several distributed generators (DGs) have been merged together with a pair of batteries and loads to form an autonomous dc microgrid (MG). To overcome the control challenge associated with coordination of multiple batteries within one stand-alone MG, a double-layer hierarchical control strategy was proposed. 1) The unit-level primary control layer was established by an adaptive voltage-droop method aimed to regulate the common bus voltage and to sustain the states of charge (SOCs) of batteries close to each other during moderate replenishment. The control of every unit was expanded with unit-specific algorithm, i.e., finish-of-charging for batteries and maximum power-point tracking (MPPT) for renewable energy sources, with which a smooth online overlap was designed and 2) the supervisory control layer was designed to use the low-bandwidth communication interface between the central controller and sources in order to collect data needed for adaptive calculation of virtual resistances (VRs) as well as transit criteria for changing unit-level operating modes. A small-signal stability for the whole range of VRs. The performance of developed control was assessed through experimental results.

Modeling and Analysis of Harmonic Stability in an AC Power-Electronics-Based Power System

Abstract: This paper addresses the harmonic stability caused by the interactions among the wideband control of power converters and passive components in an ac power-electronics-based power system. The impedance-based analytical approach is employed and expanded to a meshed and balanced three-phase network which is dominated by multiple current- and voltage-controlled inverters with LCL- and LC-filters. A method of deriving the impedance ratios for the different inverters is proposed by means of the nodal admittance matrix. Thus, the contribution of each inverter to the harmonic stability of the power system can be readily predicted through Nyquist diagrams. Time-domain simulations and experimental tests on a three-inverter-based power system are presented. The results validate the effectiveness of the theoretical approach.

Capacitor-Current-Feedback Active Damping With Reduced Computation Delay for Improving Robustness of LCL-Type Grid-Connected Inverter

Abstract: This paper investigates the capacitor-current-feedback active damping for the digitally controlled LCL-type grid-connected inverter. It turns out that proportional feedback of the capacitor current is equivalent to virtual impedance connected in parallel with the filter capacitor due to the computation and pulse width modulation (PWM) delays. The LCL-filter resonance frequency is changed by this virtual impedance. If the actual resonance frequency is higher than one-sixth of the sampling frequency (fs/6), where the virtual impedance contains a negative resistor component, a pair of open-loop unstable poles will be generated. As a result, the LCL-type grid-connected inverter becomes much easier to be unstable if the resonance frequency is moved closer to fs/6 due to the variation of grid impedance. To address this issue, this paper proposes a capacitor-current-feedback active damping with reduced computation delay, which is achieved by shifting the capacitor current sampling instant towards the PWM reference update instant. With this method, the virtual impedance exhibits more like a resistor in a wider frequency range, and the open-loop unstable poles are removed; thus, high robustness against the grid-impedance variation is acquired. Experimental results from a 6-kW prototype confirm the theoretical expectations.

Survey on Fault-Tolerant Techniques for Power Electronic Converters

Abstract: With wide-spread application of power electronic converters in high power systems, there has been a growing interest in system reliability analysis and fault-tolerant capabilities. This paper presents a comprehensive review of conventional fault-tolerant techniques regarding power electronic converters in case of power semiconductor device failures. These techniques can be classified into four categories based on the type of hardware redundancy unit: switch-level, leg-level, module-level, and system-level. Also, various fault-tolerant methods are assessed according to cost, complexity, performance, etc. The intent of this review is to provide a detailed picture regarding the current landscape of research in power electronic fault-handling mechanisms.

Moving Average Filter Based Phase-Locked Loops: Performance Analysis and Design Guidelines

Abstract: The phase-locked loops (PLLs) are probably the most widely used synchronization technique in grid-connected applications. The main challenge that is associated with the PLLs is how to precisely and fast estimate the phase and frequency, when the grid voltage is unbalanced and/or distorted. To overcome this challenge, incorporating moving average filter(s) (MAF) into the PLL structure has been proposed in some recent literature. An MAF is a linear-phase finite-impulse-response filter, which can act as an ideal low-pass filter, if certain conditions hold. The main aim of this paper is to present the control design guidelines for a typical MAF-based PLL. The paper starts with the general description of MAFs. The main challenge associated with using the MAFs is then explained, and its possible solutions are discussed. The paper then proceeds with a brief overview of the different MAF-based PLLs. In each case, the PLL block diagram description is shown, the advantages and limitations are briefly discussed, and the tuning approach (if available) is evaluated. The paper then presents two systematic methods to design the control parameters of a typical MAF-based PLL: one for the case of using a proportional-integral (PI) type loop filter (LF) in the PLL, and the other for the case of using a proportional-integral-derivative (PID) type LF. Finally, the paper compares the performance of a well-tuned MAF-based PLL when using the PI-type LF with the results of using the PID-type LF, which provides useful insights into their capabilities and limitations.

Multistep Finite Control Set Model Predictive Control for Power Electronics

Abstract: For direct model predictive control with reference tracking of the converter current, we derive an efficient optimization algorithm that allows us to solve the control problem for very long prediction horizons. This is achieved by adapting sphere decoding principles to the underlying optimization problem. The proposed algorithm requires only few computations and directly provides the optimal switch positions. Since the computational burden of our algorithm is effectively independent of the number of converter output levels, the concept is particularly suitable for multi-level topologies with a large number of voltage levels. Our method is illustrated for the case of a variable speed drive system with a three-level voltage source converter.

Step-by-Step Controller Design for LCL-Type Grid-Connected Inverter with Capacitor–Current-Feedback Active-Damping

Abstract: The injected grid current regulator and active damping of the LCL filter are essential to the control of LCL-type grid-connected inverters. Generally speaking, the current regulator guarantees the quality of the injected grid current, and the active damping suppresses the resonance peak caused by the LCL filter and makes it easier to stabilize the whole system. Based on the proportional-integral (PI) and proportional-resonant (PR) compensator together with capacitor-current-feedback active-damping which are widely used for their effectiveness and simple implementations, this paper proposes a simple step-by-step controller design method for the LCL-type grid-connected inverter. By carefully dealing with the interaction between the current regulator and active damping, the complete satisfactory regions of the controller parameters for meeting the system specifications are obtained, and from which the controller parameters can be easily picked out. Based on these satisfactory regions, it is more convenient and explicit to optimize the system performance. Besides, the insight of tuning the controller parameters from these satisfactory regions is also discussed. Simulation and experimental results verify the proposed step-by-step design method.

Design for Efficiency Optimization and Voltage Controllability of Series–Series Compensated Inductive Power Transfer Systems

Abstract: Inductive power transfer (IPT) is an emerging technology that may create new possibilities for wireless power charging and transfer applications. However, the rather complex control method and low efficiency remain the key obstructing factors for general deployment. In a regularly compensated IPT circuit, high efficiency and controllability of the voltage transfer function are always conflicting requirements under varying load conditions. In this paper, the relationships among compensation parameters, circuit efficiency, voltage transfer function, and conduction angle of the input current relative to the input voltage are studied. A design and optimization method is proposed to achieve a better overall efficiency as well as good output voltage controllability. An IPT system design procedure is illustrated with design curves to achieve a desirable voltage transfer ratio, optimizing between efficiency enhancement and current rating of the switches. The analysis is supported with experimental results.

An Adaptive Impedance-Matching Network Based on a Novel Capacitor Matrix for Wireless Power Transfer

Abstract: In a wireless power transfer (WPT) system via the magnetic resonant coupling, one of the most challenging design issues is to maintain a reasonable level of power transfer efficiency (PTE), even when the distance between the transmitter and the receiver changes When the distance varies, the PTE drastically decreases due to the impedance mismatch between the resonator of the transmitter and that of the receiver This paper presents a novel serial/parallel capacitor matrix in the transmitter, where the impedance can be automatically reconfigured to track the optimum impedance-matching point in the case of varying distances The dynamic WPT matching system is enabled by changing the combination of serial and parallel capacitors in the capacitor matrix An interesting observation in the proposed capacitor matrix is that the resonant frequency is not shifted, even with capacitor-matrix tuning In order to quickly find the best capacitor combination that achieves maximum power transfer, a window-prediction-based search algorithm is also presented in this paper The proposed resonance WPT system is implemented using a resonant frequency of 1356 MHz, and the experimental results with 1W power transfer show that the transfer efficiency increases up to 88 % when the distance changes from 0 to 12 m

An Experimental Investigation of the Tradeoff between Switching Losses and EMI Generation With Hard-Switched All-Si, Si-SiC, and All-SiC Device Combinations

Abstract: Silicon carbide (SiC) switching power devices (MOSFETs, JFETs) of 1200 V rating are now commercially available, and in conjunction with SiC diodes, they offer substantially reduced switching losses relative to silicon (Si) insulated gate bipolar transistors (IGBTs) paired with fast-recovery diodes. Low-voltage industrial variable-speed drives are a key application for 1200 V devices, and there is great interest in the replacement of the Si IGBTs and diodes that presently dominate in this application with SiC-based devices. However, much of the performance benefit of SiC-based devices is due to their increased switching speeds ( di/dt, dv/ dt), which raises the issues of increased electromagnetic interference (EMI) generation and detrimental effects on the reliability of inverter-fed electrical machines. In this paper, the tradeoff between switching losses and the high-frequency spectral amplitude of the device switching waveforms is quantified experimentally for all-Si, Si-SiC, and all-SiC device combinations. While exploiting the full switching-speed capability of SiC-based devices results in significantly increased EMI generation, the all-SiC combination provides a 70% reduction in switching losses relative to all-Si when operated at comparable dv/dt. It is also shown that the loss-EMI tradeoff obtained with the Si-SiC device combination can be significantly improved by driving the IGBT with a modified gate voltage profile.

Impedance Shaping of the Grid-Connected Inverter with LCL Filter to Improve Its Adaptability to the Weak Grid Condition

Abstract: The current-controlled grid-connected inverter with LCL filter is widely used in the distributed generation system (DGS), due to its fast dynamic response and better power quality features. However, with the increase of power injected into the grid, control performances of the inverter will be significantly influenced by the nonideal grid conditions. Specifically, the possible wide variation of the grid impedance challenges the system stability. Meanwhile, background harmonics of the grid can greatly distort the injected current. Therefore, the control of the inverter should be designed with strong stability-robustness and high harmonic-rejection-ability, both of which correlate closely with the inverter output impedance. However, it is difficult to shape the output impedance into the one with a desirable characteristic simply by adjusting the current loop gain. In this paper, an impedance shaping method is proposed with virtual impedances, and the current control loop can be designed independently. The implementation and parameter design of the virtual impedances are studied under the practical considerations. With this proposed method, the grid-connected inverter can work stably over a wide range of the typical inductive-resistive grid impedance and exhibit strong rejection ability of grid-voltage harmonics. Experimental results from a 6-kW single-phase grid-connected inverter confirm the effectiveness of the proposed method.

A Model Predictive Control System for a Hybrid Battery-Ultracapacitor Power Source

Abstract: A model predictive control system for a hybrid battery-ultracapacitor power source is proposed and experimentally verified in this paper. The main advantage of the proposed system is that the battery current, the battery state of charge, and the ultracapacitor current and voltage are maintained within predefined limits during the operation. In addition, the controller allocates fast current changes to the ultracapacitor while the battery responds mainly to slow current changes which helps to increase the battery lifetime. The presented experimental results verify operation of the proposed system.

Mode-Adaptive Decentralized Control for Renewable DC Microgrid With Enhanced Reliability and Flexibility

Abstract: A mode-adaptive decentralized control strategy is proposed for the power management of a dc microgrid with multiple renewable distributed generators and energy storage systems. In the presented solution, the dc bus voltage signal is used not only to enable power sharing among different sources, but also to designate microgrid operation modes and facilitate seamless mode transitions. With this mode-adaptive operation mechanism, a greater control freedom can be achieved than the conventional dc voltage droop control scheme. More importantly, this approach features fully self-disciplined regulation of distributed converters without an extra control center or communication link. Therefore, both reliability and flexibility can be enhanced. Meanwhile, a novel mode definition criterion is also provided to highlight the special characteristics of the dc microgrid which is different from an ac one. Three typical operation conditions are summarized according to which type of sources are dominating the power balance. Finally, the effectiveness of the proposed technique is verified experimentally based on a composite dc microgrid test system.

Optimal ZVS Modulation of Single-Phase Single-Stage Bidirectional DAB AC–DC Converters

Abstract: A comprehensive procedure for the derivation of optimal, full-operating-range zero voltage switching (ZVS) modulation schemes for single-phase, single-stage, bidirectional and isolated dual active bridge (DAB) ac-dc converters is presented. The converter topology consists of a DAB dc-dc converter, receiving a rectified ac line voltage via a synchronous rectifier. The DAB comprises primary and secondary side full bridges, linked by a high-frequency isolation transformer and a series inductor. ZVS modulation schemes previously proposed in the literature are either based on current-based or energy-based ZVS analyses. The procedure outlined in this paper for the calculation of optimal DAB modulation schemes (i.e., combined phase-shift, duty-cycle, and switching frequency modulation) relies on a novel, more accurate, current-dependent charge-based ZVS analysis, taking into account the amount of charge that is required to charge the nonlinear parasitic output capacitances of the switches during commutation. Thereby, the concept of “commutation inductance(s)” is shown to be an essential element in achieving full-operating-range ZVS. The proposed methods are applied to a 3.7 kW, bidirectional, and unity power factor electric vehicle battery charger which interfaces a 400 V dc-bus with the 230 Vac, 50-Hz utility grid. Experimental results obtained from a high-power-density, high-efficiency converter prototype are given to validate the theoretical analysis and practical feasibility of the proposed strategy.

Evaluation and Application of 600 V GaN HEMT in Cascode Structure

Abstract: Gallium nitride high electron mobility transistor (GaN HEMT) has matured dramatically over the last few years. A progressively larger number of GaN devices have been manufactured for in field applications ranging from low power voltage regulators to high power infrastructure base-stations. Compared to the state-of-the-art silicon MOSFET, GaN HEMT has a much better figure of merit and shows potential for high-frequency applications. The first generation of 600 V GaN HEMT is intrinsically normally on device. To easily apply normally on GaN HEMT in circuit design, a low-voltage silicon MOSFET is in series to drive the GaN HEMT, which is well known as cascode structure. This paper studies the characteristics and operation principles of a 600 V cascode GaN HEMT. Evaluations of the cascode GaN HEMT performance based on buck converter at hard-switching and soft-switching conditions are presented in detail. Experimental results prove that the cascode GaN HEMT is superior to the silicon MOSFET, but it still needs soft-switching in high-frequency operation due to considerable package and layout parasitic inductors and capacitors. The cascode GaN HEMT is then applied to a 1 MHz 300 W 400 V/12 V LLC converter. A comparison of experimental results with a state-of-the-art silicon MOSFET is provided to validate the advantages of the GaN HEMT.

A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices

Abstract: This paper presents an isolated on-board vehicular battery charger that utilizes silicon carbide (SiC) power devices to achieve high density and high efficiency for application in electric vehicles (EVs) and plug-in hybrid EVs (PHEVs). The proposed level 2 charger has a two-stage architecture where the first stage is a bridgeless boost ac-dc converter and the second stage is a phase-shifted full-bridge isolated dc-dc converter. The operation of both topologies is presented and the specific advantages gained through the use of SiC power devices are discussed. The design of power stage components, the packaging of the multichip power module, and the system-level packaging is presented with a primary focus on system density and a secondary focus on system efficiency. In this work, a hardware prototype is developed and a peak system efficiency of 95% is measured while operating both power stages with a switching frequency of 200 kHz. A maximum output power of 6.1 kW results in a volumetric power density of 5.0 kW/L and a gravimetric power density of 3.8 kW/kg when considering the volume and mass of the system including a case.

Analysis and Comparison of Secondary Series- and Parallel-Compensated Inductive Power Transfer Systems Operating for Optimal Efficiency and Load-Independent Voltage-Transfer Ratio

Abstract: Secondary series- and parallel-compensations are widely used in inductive power transfer (IPT) systems for various applications. These compensations are often studied under some isolated constraints of maximum power transfer, optimal efficiency at a particular loading condition, etc. These constraints constitute an insufficient set of requirements for engineers to select appropriate compensation techniques to be used as a voltage converter with optimal efficiency and loading conditions. This paper studies the characteristics of the IPT system at various frequencies of operation utilizing the two compensation techniques to work as a voltage converter. The frequencies that can provide maximum efficiency of operation and load-independent voltage-transfer ratio are analyzed. The optimal frequencies corresponding to the two compensation techniques are found and compared to facilitate the design of voltage converters with efficient power conversion and load-independent frequency of operation. The analysis is supported by experimental measurements.

H6 Transformerless Full-Bridge PV Grid-Tied Inverters

Abstract: Transformerless inverters are widely used in grid-tied photovoltaic (PV) generation systems, due to the benefits of achieving high efficiency and low cost. Various transformerless inverter topologies have been proposed to meet the safety requirement of leakage currents, such as specified in the VDE-4105 standard. In this paper, a family of H6 transformerless inverter topologies with low leakage currents is proposed, and the intrinsic relationship between H5 topology, highly efficient and reliable inverter concept (HERIC) topology, and the proposed H6 topology has been discussed as well. One of the proposed H6 inverter topologies is taken as an example for detail analysis with operation modes and modulation strategy. The power losses and power device costs are compared among the H5, the HERIC, and the proposed H6 topologies. A universal prototype is built for these three topologies mentioned for evaluating their performances in terms of power efficiency and leakage currents characteristics. Experimental results show that the proposed H6 topology and the HERIC achieve similar performance in leakage currents, which is slightly worse than that of the H5 topology, but it features higher efficiency than that of H5 topology.

On Energy Storage Requirements in Modular Multilevel Converters

Abstract: The modular multilevel converter is a promising topology for high-voltage and high-power applications. By using submodules equipped with dc-capacitors excellent output voltage waveforms can be obtained at low switching frequencies. The rated energy storage of the submodule capacitors is a driving factor of the size, cost, and weight of the submodules. Although the modular multilevel converter has been thoroughly investigated in the literature, a more detailed analysis of the energy-storage requirements will provide an important contribution for dimensioning and analysis of modular multilevel converters. Such an analysis is presented in this paper. The analysis relates the power transfer capability to the stored energy in the converter and the findings are validated by both simulations and experimental results. The required size of the submodule capacitors in a 4.5 MW grid-connected converter is first calculated and the calculated operating range is then compared with simulation results. The experimental results show that if the average capacitor voltage is allowed to increase 10% above the nominal value an energy storage to power transfer ratio of 21 J/kW can be achieved. It is concluded that the presented theory can relate the power transfer capability to the energy storage in the converter and is thus a valuable tool in the design and analysis of modular multilevel converters.

Understanding the Effect of PCB Layout on Circuit Performance in a High-Frequency Gallium-Nitride-Based Point of Load Converter

Abstract: The introduction of enhancement-mode gallium-nitride-based power devices such as the eGaN FET offers the potential to achieve higher efficiencies and higher switching frequencies than possible with silicon MOSFETs. With the improvements in switching performance and low parasitic packaging provided by eGaN FETs, the printed circuit board (PCB) layout becomes critical to converter performance. This paper will study the effect of PCB layout parasitic inductance on efficiency and peak device voltage stress for an eGaN FET-based point of load (POL) converter operating at a switching frequency of 1 MHz, an input voltage range of 12-28 V, an output voltage of 1.2 V, and an output current up to 20 A. This paper will also compare the parasitic inductances of conventional PCB layouts and propose an improved PCB design, providing a 40% decrease in parasitic inductance over the best conventional PCB design.

Model Predictive Torque Control of Induction Motor Drives With Optimal Duty Cycle Control

Abstract: Model predictive torque control (MPTC) is emerging as a powerful control scheme for high performance control of induction motor (IM) drives. Compared to direct torque control, MPTC is more effective and accurate in voltage vector selection by incorporating the system model directly with the finite switching states. However, for two-level inverter-fed IM drives, the sampling frequency of MPTC has to be high to achieve good performance due to the limited number of voltage vectors. Recently, the concept of duty cycle control was introduced in MPTC by inserting a null vector along with the selected active voltage vector to achieve torque ripple reduction. The active vector is first selected from conventional MPTC and then its duration is determined based on a certain principle. The cascaded processing of active vector and its duration leads to poor low-speed performance and the sampling frequency still has to be high. This paper proposes an improved MPTC with duty cycle control by optimizing the vector selection and its duration simultaneously when minimizing both torque and flux errors. As a result, better steady-state performance at both low and high speeds is achieved, even if the sampling frequency is reduced by half. The effectiveness of the proposed MPTC is verified by both simulation and experimental results.

A Control Method for Voltage Balancing in Modular Multilevel Converters

Abstract: The modular multilevel converter (MMC) is attractive for medium- or high-power applications because of the advantages of its high modularity, availability, and high power quality. The voltage balancing of the floating capacitors in the cascaded submodules of the MMC is a key issue. In this paper, a voltage-balancing control method is proposed. This method uses the phase-shifted carrier-based pulsewidth modulation scheme to control high-frequency current components for capacitor voltage balancing in the MMC without measuring the arm currents. Simulations and experimental studies of the MMC were conducted, and the results confirm the effectiveness of the proposed capacitor voltage-balancing control method.

A High Voltage Gain DC–DC Converter Integrating Coupled-Inductor and Diode–Capacitor Techniques

Abstract: The high-voltage gain converter is widely employed in many industry applications, such as photovoltaic systems, fuel cell systems, electric vehicles, and high-intensity discharge lamps. This paper presents a novel single-switch high step-up nonisolated dc-dc converter integrating coupled inductor with extended voltage doubler cell and diode-capacitor techniques. The proposed converter achieves extremely large voltage conversion ratio with appropriate duty cycle and reduction of voltage stress on the power devices. Moreover, the energy stored in leakage inductance of coupled inductor is efficiently recycled to the output, and the voltage doubler cell also operates as a regenerative clamping circuit, alleviating the problem of potential resonance between the leakage inductance and the junction capacitor of output diode. These characteristics make it possible to design a compact circuit with high static gain and high efficiency for industry applications. In addition, the unexpected high-pulsed input current in the converter with coupled inductor is decreased. The operating principles and the steady-state analyses of the proposed converter are discussed in detail. Finally, a prototype circuit is implemented in the laboratory to verify the performance of the proposed converter.