Showing papers in "IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control in 2008"

Broadband piezoelectric energy harvesting devices using multiple bimorphs with different operating frequencies

Abstract: This paper presents a novel approach for designing broadband piezoelectric harvesters by integrating multiple piezoelectric bimorphs (PBs) with different aspect ratios into a system. The effect of 2 connecting patterns among PBs, in series and in parallel, on improving energy harvesting performance is discussed. It is found for multifrequency spectra ambient vibrations: 1) the operating frequency band (OFB) of a harvesting structure can be widened by connecting multiple PBs with different aspect ratios in series; 2) the OFB of a harvesting structure can be shifted to the dominant frequency domain of the ambient vibrations by increasing or decreasing the number of PBs in parallel. Numerical results show that the OFB of the piezoelectric energy harvesting devices can be tailored by the connection patterns (i.e., in series and in parallel) among PBs.

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control

Abstract: This page shows some examples of multimedia files. It is also available at: http://www.ieee-uffc.org/tr/mexample.pdf. For submission of multimedia manuscripts to TUFFC, please follow “Information for Contributors” at: http://www.ieeeuffc.org/tr/contrib.pdf. Multimedia Example Created by Jian-yu Lu, Editor-in-Chief, 07/07/03 IEEE Ultrasonics, Ferroelectrics, and Frequency Control Society 1. Color Figure: The IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control (TUFFC) now accepts color figures online with corresponding grayscale figures in print without additional charges if authors follow the multimedia manuscript submission procedure in the “Information for Contributors”. The “color figures” icon below indicates in the print that a color version of the figure is available online. It also links to the color figure submitted originally by the authors for viewing details. Because of the sizes of color figures and the additional editorial work such as making two sets of PostScript files in which they remain identical after replacing grayscale with color, authors should request color figures online only when it is necessary. The color figure must be in JPEG (Joint Photographic Expert Group) or GIF (Graphics Interchange Format) format to reduce file size and to decrease the bandwidth usage on the TUFFC server. Fig. 1. An eight-layer printed circuit board (PCB) used primarily for multi-channel ultrasound signal reception and storage. The board was designed in the Ultrasound Lab at The University of Toledo, led by Dr. Jian-yu Lu. It is one of the many PCBs designed for a high-frame rate medical ultrasound imaging system [1], which consists of 128 linear, ±144V peak, 0.05-10MHz, and 12-bit arbitrary waveform generators for the production of ultrasound signals or for other research purposes. 2. Movies: Please click on the movie icon to see a movie. The two movies below give you an idea on the file size versus movie quality. “VCD quality” here means 1150kbits/s for video and 224kbits/s for 16-bit MP2 stereo audio at 44.1KHz sampling rate. Fig. 2. An introduction to the Ultrasound Lab at The University of Toledo. 3. Movies and Animations: Please click on the movie icons to see movies or animations. Fig. 3. Circuit design and construction of the imaging system. 4. Movies and Animation: Please click on the movie icons to see movies or animation. Movie [File size: 785KB; Format: MPEG1; Resolution: 320X240; Duration: 9 seconds]

Integration of 2D CMUT arrays with front-end electronics for volumetric ultrasound imaging

Abstract: For three-dimensional (3D) ultrasound imaging, connecting elements of a two-dimensional (2D) transducer array to the imaging system's front-end electronics is a challenge because of the large number of array elements and the small element size. To compactly connect the transducer array with electronics, we flip-chip bond a 2D 16 times 16-element capacitive micromachined ultrasonic transducer (CMUT) array to a custom-designed integrated circuit (IC). Through-wafer interconnects are used to connect the CMUT elements on the top side of the array with flip-chip bond pads on the back side. The IC provides a 25-V pulser and a transimpedance preamplifier to each element of the array. For each of three characterized devices, the element yield is excellent (99 to 100% of the elements are functional). Center frequencies range from 2.6 MHz to 5.1 MHz. For pulse-echo operation, the average -6-dB fractional bandwidth is as high as 125%. Transmit pressures normalized to the face of the transducer are as high as 339 kPa and input-referred receiver noise is typically 1.2 to 2.1 rnPa/ radicHz. The flip-chip bonded devices were used to acquire 3D synthetic aperture images of a wire-target phantom. Combining the transducer array and IC, as shown in this paper, allows for better utilization of large arrays, improves receive sensitivity, and may lead to new imaging techniques that depend on transducer arrays that are closely coupled to IC electronics.

Pyroelectric energy conversion: Optimization principles

Abstract: In the framework of microgenerators, we present in this paper the key points for energy harvesting from temperature using ferroelectric materials. Thermoelectric devices profit from temperature spatial gradients, whereas ferroelectric materials require temporal fluctuation of temperature, thus leading to different applications targets. Ferroelectric materials may harvest perfectly the available thermal energy whatever the materials properties (limited by Carnot conversion efficiency) whereas thermoelectric material's efficiency is limited by materials properties (ZT figure of merit). However, it is shown that the necessary electric fields for Carnot cycles are far beyond the breakdown limit of bulk ferroelectric materials. Thin films may be an excellent solution for rising up to ultra-high electric fields and outstanding efficiency. Different thermodynamic cycles are presented in the paper: principles, advantages, and drawbacks. Using the Carnot cycle, the harvested energy would be independent of materials properties. However, using more realistic cycles, the energy conversion effectiveness remains dependent on the materials properties as discussed in the paper. A particular coupling factor is defined to quantify and check the effectiveness of pyroelectric energy harvesting. It is defined similarly to an electromechanical coupling factor as k2 = p2thetas0/(epsivthetas 33 CE), where p, thetas0, epsivthetas 33, Ce are pyroelectric coefficient, maximum working temperature, dielectric permittivity, and specific heat, respectively. The importance of the electrothermal coupling factor is shown and discussed as an energy harvesting figure of merit. It gives the effectiveness of all techniques of energy harvesting (except the Carnot cycle). It is finally shown that we could reach very high efficiency using lang111rang0.75Pb(Mg1/3Nb2/3)-0.25PbTiO3 single crystals and synchronized switch harvesting on inductor (almost 50% of Carnot efficiency). Finally, practical implementation key points of pyroelectric energy harvesting are presented showing that the different thermodynamic cycles are feasible and potentially effective, even compared to thermoelectric devices.

High frame-rate blood vector velocity imaging using plane waves: Simulations and preliminary experiments

Abstract: Conventional ultrasound methods for acquiring color images of blood velocity are limited by a relatively low frame-rate and are restricted to give velocity estimates along the ultrasound beam direction only. To circumvent these limitations, the method presented in this paper uses 3 techniques: 1) The ultrasound is not focused during the transmissions of the ultrasound signals; 2) A 13 -bit Barker code is transmitted simultaneously from each transducer element; and 3) The 2-D vector velocity of the blood is estimated using 2-D cross-correlation. A parameter study was performed using the Field II program, and performance of the method was investigated when a virtual blood vessel was scanned by a linear array transducer. An improved parameter set for the method was identified from the parameter study, and a flow rig measurement was performed using the same improved setup as in the simulations. Finally, the common carotid artery of a healthy male was scanned with a scan sequence that satisfies the limits set by the Food and Drug Administration. Vector velocity images were obtained with a frame-rate of 100 Hz where 40 speckle images are used for each vector velocity image. It was found that the blood flow approximately followed the vessel wall, and that maximum velocity was approximately 1 m/s, which is a normal value for a healthy person. To further evaluate the method, the test person was scanned with magnetic resonance (MR) angiography. The volume flow derived from the MR scanning was compared with that from the ultrasound scanning. A deviation of 9% between the 2 volume flow estimates was found.

Thin-film piezoelectric-on-silicon resonators for high-frequency reference oscillator applications

Abstract: This paper studies the application of lateral bulk acoustic thin-film piezoelectric-on-substrate (TPoS) resonators in high-frequency reference oscillators Low-motional impedance TPoS resonators are designed and fabricated in 2 classes--high-order and coupled-array Devices of each class are used to assemble reference oscillators and the performance characteristics of the oscillators are measured and discussed Since the motional impedance of these devices is small, the transimpedance amplifier (TIA) in the oscillator loop can be reduced to a single transistor and 3 resistors, a format that is very power-efficient The lowest reported power consumption is ~350 muW for an oscillator operating at ~106 MHz A passive temperature compensation method is also utilized bThis paper studies the application of lateral bulk acoustic thin-film piezoelectric-on-substrate (TPoS) resonators in high-frequency reference oscillators Low-motionalimpedance TPoS resonators are designed and fabricated in 2 classes--high-order and coupled-array Devices of each class are used to assemble reference oscillators and the performance characteristics of the oscillators are measured and discussed Since the motional impedance of these devices is small, the transimpedance amplifier (TIA) in the oscillator loop can be reduced to a single transistor and 3 resistors, a format that is very power-efficient The lowest reported power consumption is ~350 muW for an oscillator operating at ~106 MHz A passive temperature compensation method is also utilized by including the buried oxide layer of the silicon-on-insulator (SOI) substrate in the structural resonant body of the device, and a very small (-24 ppm/degC) temperature coefficient of frequency is obtained for an 82-MHz oscillatory including the buried oxide layer of the silicon-on-insulator (SOI) substrate in the structural resonant body of the device, and a very small (-24 ppm/degC) temperature coefficient of frequency is obtained for an 82-MHz oscillator

Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction

Abstract: This paper presents a new technique for optimized energy harvesting using piezoelectric microgenerators called double synchronized switch harvesting (DSSH). This technique consists of a nonlinear treatment of the output voltage of the piezoelectric element. It also integrates an intermediate switching stage that ensures an optimal harvested power whatever the load connected to the microgenerator. Theoretical developments are presented considering either constant vibration magnitude, constant driving force, or independent extraction. Then experimental measurements are carried out to validate the theoretical predictions. This technique exhibits a constant output power for a wide range of load connected to the microgenerator. In addition, the extracted power obtained using such a technique allows a gain up to 500% in terms of maximal power output compared with the standard energy harvesting method. It is also shown that such a technique allows a fine-tuning of the trade-off between vibration damping and energy harvesting.

The wavenumber algorithm for full-matrix imaging using an ultrasonic array

Abstract: Ultrasonic imaging using full-matrix capture, e.g., via the total focusing method (TFM), has been shown to increase angular inspection coverage and improve sensitivity to small defects in nondestructive evaluation. In this paper, we develop a Fourier-domain approach to full-matrix imaging based on the wavenumber algorithm used in synthetic aperture radar and sonar. The extension to the wavenumber algorithm for full-matrix data is described and the performance of the new algorithm compared with the TFM, which we use as a representative benchmark for the time-domain algorithms. The wavenumber algorithm provides a mathematically rigorous solution to the inverse problem for the assumed forward wave propagation model, whereas the TFM employs heuristic delay-and-sum beamforming. Consequently, the wavenumber algorithm has an improved point-spread function and provides better imagery. However, the major advantage of the wavenumber algorithm is its superior computational performance. For large arrays and images, the wavenumber algorithm is several orders of magnitude faster than the TFM. On the other hand, the key advantage of the TFM is its flexibility. The wavenumber algorithm requires a regularly sampled linear array, while the TFM can handle arbitrary imaging geometries. The TFM and the wavenumber algorithm are compared using simulated and experimental data.

Sidelobe suppression in ultrasound imaging using dual apodization with cross-correlation

Abstract: This paper introduces a novel sidelobe and clutter suppression method in ultrasound imaging called dual apodization with cross-correlation or DAX. DAX dramatically improves the contrast-to-noise ratio (CNR) allowing for easier visualization of anechoic cysts and blood vessels. This technique uses dual apodization or weighting strategies that are effective in removing or minimizing clutter and efficient in terms of computational load and hardware/software needs. This dual apodization allows us to determine the amount of mainlobe versus clutter contribution in a signal by cross-correlating RF data acquired from 2 apodization functions. Simulation results using a 128 element 5 MHz linear array show an improvement in CNR of 139% compared with standard beamformed data with uniform apodization in a 3 mm diameter anechoic cylindrical cyst. Experimental CNR using a tissue-mimicking phantom with the same sized cyst shows an improvement of 123% in a DAX processed image.

Ultrasonic guided waves in bone

Abstract: Recent progress in quantitative ultrasound (QUS) has shown increasing interest toward measuring long bones by ultrasonic guided waves. This technology is widely used in the field of nondestructive testing and evaluation of different waveguide structures. Cortical bone provides such an elastic waveguide and its ability to sustain loading and resist fractures is known to be related to its mechanical properties at different length scales. Because guided waves could yield diverse characterizations of the bone's mechanical properties at the macroscopic level, the method of guided waves has a strong potential over the standardized bone densitometry as a tool for bone assessment. Despite this, development of guided wave methods is challenging, e.g., due to interferences and rnultiparametric inversion problems. This paper discusses the promises and challenges related to bone characterization by ultrasonic guided waves.

Instrumentation for in vivo ultrasonic characterization of bone strength

Abstract: Although it has been more than 20 years since the first recorded use of a quantitative ultrasound (QUS) technology to predict bone fragility, the field has not yet reached its maturity. QUS has the potential to predict fracture risk in several clinical circumstances and has the advantages of being nonionizing, inexpensive, portable, highly acceptable to patients, and repeatable. However, the wide dissemination of QUS in clinical practice is still limited and suffering from the absence of clinical consensus on how to integrate QUS technologies in bone densitometry armamentarium. Several critical issues need to be addressed to develop the role of QUS within rheumatology. These include issues of technologies adapted to measure the central skeleton, data acquisition, and signal processing procedures to reveal bone properties beyond bone mineral quantity and elucidation of the complex interaction between ultrasound and bone structure. This article reviews the state-of-the-art in technological developments applied to assess bone strength in vivo. We describe generic measurement and signal processing methods implemented in clinical ultrasound devices, the devices and their practical use, and performance measures. The article also points out the present limitations, especially those related to the absence of standardization, and the lack of comprehensive theoretical models. We conclude with suggestions of future lines and trends in technology challenges and research areas such as new acquisition modes,, advanced signal processing techniques, and modelization.

Defect characterization using an ultrasonic array to measure the scattering coefficient matrix

Abstract: Ultrasonic nondestructive evaluation is used for detection, characterization, and sizing of defects. The accurate sizing of defects that are of similar or less size than the ultrasonic wavelength is of particular importance in assessing structural integrity. In this paper, we demonstrate how measurement of the scattering coefficient matrix of a cracklike defect can be used to obtain its size, shape, and orientation. The scattering coefficient matrix describes the far field amplitude of scattered signals from a scatterer as a function of incident and scattering angles. A finite element (FE) modeling procedure is described that predicts the scattering coefficient matrix of various cracklike defects. Experimental results are presented using a commercial 64-element, 5 MHz array on 2 aluminum test samples that contain several machined slots and through thickness circular holes. To minimize the interference from the reflections of neighboring defects, a subarray approach is used to focus ultrasound on each target defect in turn and extract its scattering coefficient matrices. A circular hole and a fine slot can be clearly distinguished by their different scattering coefficient matrices over a specific range of incident angles and scattering angles. The orientation angles of slots directly below the array are deduced from the measured scattering coefficient matrix to an accuracy of a few degrees, and their lengths are determined with an error of 10%.

Simultaneous imaging of artery-wall strain and blood flow by high frame rate acquisition of RF signals

Abstract: Mechanical properties of the arterial walls are significantly altered by atherosclerosis, and various studies have been recently conducted to measure the regional elastic properties (radial strain) of the arterial wall. We have developed a phase-sensitive correlation-based method, namely, the phased-tracking method, to measure the regional radial strain. On the other hand, the measurement of blood flow is an important practical routine in the diagnosis of atherosclerosis. It would be useful if the regional strain of the arterial wall as well as blood flow could be assessed simultaneously. Such measurement would require a high frame rate of several kilohertz. In this study, acquisition of ultrasonic RF echoes at a high frame rate (about 3500 Hz) was achieved using parallel beamforming in which plane waves were transmitted only 3 times and receive beamforming created 24 beams for each transmit beam. The accuracy in measurement of the minute radial strain was evaluated by a basic experiment using a cylindrical phantom. The error of the measured strain from the theoretical strain profile and its standard deviation were 4.8% and 9.5%, respectively. Furthermore, the radial strain of a carotid arterial wall and blood flow were simultaneously imaged in vivo.

Capon beamforming in medical ultrasound imaging with focused beams

Abstract: Medical ultrasound imaging is conventionally done by insonifying the imaged medium with focused beams. The backscattered echoes are beamformed using delay-and-sum operations that cannot completely eliminate the contribution of signals backscattered by structures off the imaging beam to the beamsum. It leads to images with limited resolution and contrast. This paper presents an adaptation of the Capon beam- former algorithm to ultrasound medical imaging with focused beams. The strategy is to apply data-dependent weight functions to the imaging aperture. These weights act as lateral spatial filters that filter out off-axis signals. The weights are computed for each point in the imaged medium, from the statistical analysis of the signals backscattered by that point to the different elements of the imaging probe when insonifying it with different focused beams. Phantom and in vivo images are presented to illustrate the benefits of the Capon algorithm over the conventional delay-and-sum approach. On heart sector images, the clutter in the heart chambers is decreased. The endocardium border is better defined. On abdominal linear array images, significant contrast and resolution enhancement are observed.

Theory and operation of 2-D array piezoelectric micromachined ultrasound transducers

Abstract: Piezoelectric micromachined ultrasound transducers (pMUTs) are a new approach for the construction of 2-D arrays for forward-looking 3-D intravascular (IVUS) and intracardiac (ICE) imaging. Two-dimensional pMUT test arrays containing 25 elements (5 times 5 arrays) were bulk micromachined in silicon substrates. The devices consisted of lead zirconate titanate (PZT) thin film membranes formed by deep reactive ion etching of the silicon substrate. Element widths ranged from 50 to 200 mum with pitch from 100 to 300 mum. Acoustic transmit properties were measured in de-ionized water with a calibrated hydrophone placed at a range of 20 mm. Measured transmit frequencies for the pMUT elements ranged from 4 to 13 MHz, and mode of vibration differed for the various element sizes. Element capacitance varied from 30 to over 400 pF depending on element size and PZT thickness. Smaller element sizes generally produced higher acoustic transmit output as well as higher frequency than larger elements. Thicker PZT layers also produced higher transmit output per unit electric field applied. Due to flexure mode operation above the PZT coercive voltage, transmit output increased nonlinearly with increased drive voltage. The pMUT arrays were attached directly to the Duke University T5 phased array scanner to produce real-time pulse-echo B-mode images with the 2-D pMUT arrays.

Ultrasonic scattering from cancellous bone: A review

Abstract: This paper reviews theory, measurements, and computer simulations of scattering from cancellous bone reported by many laboratories. Three theoretical models (binary mixture, Faran cylinder, and weak scattering) for scattering from cancellous bone have demonstrated some consistency with measurements of backscatter. Backscatter is moderately correlated with bone mineral density in human calcaneus in vitro (r2 = 0.66 - 0.68). Backscatter varies approximately as frequency cubed and trabecular thickness cubed in human calcaneus and femur in vitro. Backscatter from human calcaneus and bovine tibia exhibits substantial anisotropy. So far, backscatter has demonstrated only modest clinical utility. Computer simulation models have helped to elucidate mechanisms underlying scattering from cancellous bones.

1.52-GHz micromechanical extensional wine-glass mode ring resonators

Abstract: Vibrating polysilicon micromechanical ring resonators, using a unique extensional wine-glass-mode shape to achieve lower impedance than previous UHF resonators, have been demonstrated at frequencies as high as 1.2 GHz with a Q of 3,700, and 1.52 GHz with a Q of 2,800. The 1.2-GHz resonator exhibits a measured motional resistance of 1 MOmega with a dc-bias voltage of 20 V, which is 2.2 times lower than the resistance measured on radial contour- mode disk counterparts at the same frequency. The use of larger rings offers a path toward even lower impedance, provided the spurious modes that become more troublesome as ring size increases can be properly suppressed using methods described herein. With spurious modes suppressed, the high-Q and low-impedance advantages, together with the multiple frequency on-chip integration advantages afforded by capacitively transduced mumechanical resonators, make this device an attractive candidate for use in the front-end RF filtering and frequency generation functions needed by wireless communication devices.

Ultrasound simulation in bone

Abstract: The manner in which ultrasound interacts with bone is of key interest in therapy and diagnosis alike. These may include applications directly to bone, as, for example, in treatment to accelerate the healing of bone fractures and in assessment of bone density in osteoporosis, or indirectly in diagnostic imaging of soft tissue with interest in assessing exposure levels to nearby bone. Because of the lack of analytic solutions to virtually every "practical problem" encountered clinically, ultrasound simulation has become a widely used technique for evaluating ultrasound interactions in bone. This paper provides an overview of the use of ultrasound simulation in bone. A brief description of the mathematical model used to characterize ultrasound propagation in bone is first provided. A number of simulation examples are then presented that explain how simulation may be utilized in a variety of practical configurations. The focus of this paper in terms of examples presented is on diagnostic applications in bone, and, in particular, for assessment of osteoporosis. However, the use of simulation in other areas of interest can easily be extrapolated from the examples presented. In conclusion, this paper describes the use of ultrasound simulation in bone and demonstrates the power of computational methods for ultrasound research in general and tissue and bone applications in particular.

A composite high-frame-rate system for clinical cardiovascular imaging

Abstract: High frame-rate ultrasound RF data acquisition has been proved to be critical for novel cardiovascular imaging techniques, such as high-precision myocardial elastography, pulse wave imaging (PWI), and electromechanical wave imaging (EWI). To overcome the frame-rate limitations on standard clinical ultrasound systems, we developed an automated method for multi-sector ultrasound imaging through retrospective electrocardiogram (ECG) gating on a clinically used open architecture system. The method achieved both high spatial (64 beam density) and high temporal resolution (frame rate of 481 Hz) at an imaging depth up to 11 cm and a 100% field of view in a single breath-hold duration. Full-view imaging of the left ventricle and the abdominal aorta of healthy human subjects was performed using the proposed technique in vivo. ECG and ultrasound RF signals were simultaneously acquired on a personal computer (PC). Composite, full-view frames both in RF- and B-mode were reconstructed through retrospective combination of seven small (20%) juxtaposed sectors using an ECG-gating technique. The axial displacement of the left ventricle, in both long-axis and short-axis views, and that of the abdominal aorta, in a long-axis view, were estimated using a RF-based speckle tracking technique. The electromechanical wave and the pulse wave propagation were imaged in a cineloop using the proposed imaging technique. Abnormal patterns of such wave propagation can serve as indicators of early cardiovascular disease. This clinical system could thus expand the range of applications in cardiovascular elasticity imaging for quantitative, noninvasive diagnosis of myocardial ischemia or infarction, arrhythmia, abdominal aortic aneurysms, and early-stage atherosclerosis.

Assessment of the mechanical properties of the musculoskeletal system using 2-D and 3-D very high frame rate ultrasound

Abstract: One of the great challenges for understanding muscular diseases is to assess noninvasively the active and passive mechanical properties of the musculoskeletal system. In this paper we report the use of ultrafast ultrasound imaging to explore with a submillimeter resolution the behavior of the contracting tissues in vivo (biceps brachii). To image the contraction, which is a very brief phenomenon (<100 ms), a recently designed ultrasound scanner prototype able to take up to 6000 frames/s was used. A very high frame rate from 1000 to 2500 frames/s was used to image the cross section plane of the muscle (transverse to fibers) enabling us to catch in real time the muscle contraction during a transient electrostimulation. Tissue velocities were obtained from radiofrequency based speckle tracking techniques and their profiles are discussed with respect to electrostimulation intensities and pulse repetition frequencies for different volunteers. Three-dimensional (3-D) very high frame rate movies were also acquired by repeating the experiment for different acquisition planes while triggering the imaging system with the electrostimulation device. The reconstructed 3-D velocity field allows the full localization of the contracting fibers bundle. This ultrasound technique, referred to as echo mechanomyography, offers new perspectives for in vivo and in situ noninvasive muscle diagnosis of an active contractile tissue.

High-frame rate, full-view myocardial elastography with automated contour tracking in murine left ventricles in vivo

Abstract: Myocardial elastography is a novel method for noninvasively assessing regional myocardial function, with the advantages of high resolution and high precision. The purpose in this paper was to isolate the left ventricle from other structures for better displacement and strain visualization. Using a high-resolution (30 MHz) ultrasound system and a retrospective electrocardiogram (ECG)-gating technique, an extremely high frame rate (up to 8 kHz) was previously shown achievable for full-view (12-mm times 12-mm) myocardial elastography in the murine left ventricle. In vivo experiments were performed in anesthetized normal and infarcted mice [one day after left anterior descending (LAD) coronary artery ligation]. Radio frequency (RF) signals of the left ventricle (LV) in the long-axis view and the associated ECG were simultaneously acquired, with the ECG allowing gating of the RF signals. Incremental axial displacement of the myocardium was estimated using a one-dimensional (1-D) cross-correlation function. The cumulative displacement and strain then were calculated from the incremental displacement. In this paper, after manual selection of 40-50 points along the endo-and epicardial borders in the first frame of the cine-loop, myocardial contour was automatically tracked across the entire LV throughout a full cardiac cycle, which correctly determined the region of interest (ROI) for better interpretation. The cine-loop of the cumulative displacement and strain in one cardiac cycle, in both the normal and infarcted cases, showed that motion and deformation in the infarcted myocardium were significantly reduced, and that the infarcted region underwent thinning, rather than thickening, during systole. High precision of the displacement estimation, due to high frequency (30 MHz) and high frame rate (up to 8 kHz) available with this system, allowed for automated tracking of a manually-initialized myocardial contour over an entire cardiac cycle. High frame rate, full-view myocardial elastography with automated contour tracking could provide regional strain information of the LV throughout an entire cardiac cycle, and characterize normal as well as detect abnormal myocardial function, such as an infarction. The method of automated contour tracking can further enhance the capability of the elastographic technique with minimal user intervention while providing accurate functional information for the detection of disease throughout the entire cardiac cycle.

The Measurement of Broadband Ultrasonic Attenuation in Cancellous Bone-A Review of the Science and Technology

Abstract: The measurement of broadband ultrasonic attenuation (BUA) in cancellous bone at the calcaneus was first described in 1984. The assessment of osteoporosis by BUA has recently been recognized by Universities UK, within its EurekaUK book, as being one of the "100 discoveries and developments in UK Universities that have changed the world" over the past 50 years, covering the whole academic spectrum from the arts and humanities to science and technology. Indeed, BUA technique has been clinically validated and is utilized worldwide, with at least seven commercial systems providing calcaneal BUA measurement. However, a fundamental understanding of the dependence of BUA upon the material and structural properties of cancellous bone is still lacking. This review aims to provide a science- and technology-orientated perspective on the application of BUA to the medical disease of osteoporosis.

Evolution of bubble clouds induced by pulsed cavitational ultrasound therapy - Histotripsy

Abstract: Mechanical tissue fractionation can be achieved using successive, high-intensity ultrasound pulses in a process termed histotripsy. Histotripsy has many potential clinical applications where noninvasive tissue removal is desired. The primary mechanism for histotripsy is believed to be cavitation. Using fast-gated imaging, this paper studies the evolution of a cavitating bubble cloud induced by a histotripsy pulse (10 and 14 cycles) at peak negative pressures exceeding 21 MPa. Bubble clouds are generated inside a gelatin phantom and at a tissue-water interface, representing two situations encountered clinically. In both envi ronments, the imaging results show that the bubble clouds share the same evolutionary trend. The bubble cloud and individual bubbles in the cloud were generated by the first cycle of the pulse, grew with each cycle during the pulse, and continued to grow and collapsed several hundred microseconds after the pulse. For example, the bubbles started under 10 mum, grew to 50 mum during the pulse, and continued to grow > 100 mum after the pulse. The results also suggest that the bubble clouds generated in the two environments differ in growth and collapse duration, void fraction, shape, and size. This study furthers our understanding of the dynamics of bubble clouds induced by histotripsy.

Ultrasonic monitoring of bone fracture healing

Abstract: Quantitative ultrasound has attracted significant interest in the evaluation of bone fracture healing. Animal and clinical studies have demonstrated that the propagation velocity across fractured bones can be used as an indicator of healing. Researchers have recently employed computational methods for modeling wave propagation in bones, aiming to gain insight into the underlying mechanisms of wave propagation and to further enhance the monitoring capabilities of ultrasound. In this paper, we review the relevant literature and present the current status of knowledge.

Displacement vector measurement using instantaneous ultrasound signal phase-multidimensional autocorrelation and Doppler methods

Abstract: Two new methods of measuring a multidimensional displacement vector using an instantaneous ultrasound signal phase are described, i.e., the multidimensional autocorrelation method (MAM) and multidimensional Doppler method (MDM). A high measurement accuracy is achieved by combining either method with the lateral Gaussian envelope cosine modulation method (LGECMM) or multidirectional synthetic aperture method (MDSAM). Measurement accuracy is evaluated using simulated noisy echo data. Both methods yield accurate measurements comparable to that of our previously developed cross-spectrum phase gradient method (MCSPGM); however, they require less computational time (the order, MDM ≪ MAM ≈ MCSPGM) and would provide realtime measurements. Moreover, comparisons of LGECMM and MDSAM performed by geometrical evaluations clarifies that LGECMM has potentials to yield more accurate measurements with less computational time. Both MAM and MDM can be applied to the measurement of tissue strain, blood flow, sonar data, and other target motions.

Microelastic imaging of bone

Abstract: Several high-frequency ultrasound techniques have been developed during the last decade with the intention of assessing elastic properties of bone at the tissue level. The basic measurement principles can be divided into: 1) measurement of the compressional wave velocity in thin tissue sections; 2) measurement of surface acoustic wave velocities in thick sections; and 3) derivation of the acoustic impedance from the confocal reflection amplitude in thick sections. In this paper, the 3 principles are described with example measurements given in the frequency range from 50 MHz to 1.2 GHz. The measurements were made with 2 microscopes operating in the pulse-echo mode, either with frequencies up to 200 MHz and time-resolved detection or between 100 MHz and 2 GHz and amplitude detection. The methods are compared and their application potentials and limitations are discussed with respect to the hierarchical structure of cortical bone. Mapping of the confocal reflection amplitude has superior capabilities for deriving quantitative elastic and structural parameters in the heterogeneous bone material. Even at low frequencies (50 MHz), the mineralized tissue matrix can be separated from the larger pores (Haversian canals), and the elastic coefficient in the probing direction can be measured in 2 dimensions. Depending on the type of sample surface preparation (flat or cylindrically shaped), local distribution of a single elastic coefficient or the average transverse isotropic stiffness tensor can be derived. With frequencies in the GHz range, the lamellar bone structure can be analyzed. However, at one GHz, the acoustic wavelength is still one order of magnitude larger than the individual mineralized collagen fibrils. Although the thickness of a lamellar unit can easily be assessed from the acoustic image, the derivation of the anisotropic elastic properties of the mineralized collagen fibrils as well as the detailed structure of a lamella can only be accomplished with further model assumptions.

Piezoelectricity of chiral polymeric fiber and its application in biomedical engineering

Abstract: Poly-L-lactic acid (PLLA), which is a type of chiral polymer, exhibits a high shear piezoelectric constant. To realize a higher shear piezoelectric constant, we spun PLLA resin into fibers. We succeeded in controlling the piezoelectric motion of a PLLA fiber by applying a dc voltage and ac voltage, similar to the control of a piezoelectric actuator. On the basis of this experimental result, we designed a catheter using a PLLA fiber (PLLA fiber catheter) and tweezers using a pair of PLLA fibers (PLLA fiber tweezers), controlled by adjusting the applied voltage. Then, using the PLLA fiber tweezers or catheter, we successfully picked up and removed small samples, such as a thrombosis in a blood vessel.

Energy harvesting based on FE-FE transition in ferroelectric single crystals

Abstract: The pyroelectric properties of Pb(Zn1/3Nb2/3)0.055Ti0.045BO3 single crystals versus an electric field have been studied for energy harvesting in this paper. Two thermodynamic cycles (Stirling and Ericsson) were used for this purpose. By applying an electric field, a FE-FE transition was induced, abruptly increasing the polarization. This transition minimized the supplied energy and improved the harvested energy. By discharging the single crystal at a higher temperature, a gain of 1100% was obtained with the Stirling cycle at 1 kV/rnrn (gain is defined as harvested energy divided by supplied energy). The study revealed that Stirling cycles are more interesting for low electric fields. Based on experimental results, simulations were carried out to estimate energy harvesting in high electric fields to evaluate the performances of thin samples (single crystals or oriented thin films). At high electric fields, both cycles gave almost the same energy harvesting, but Ericsson cycles were more appropriate to control the voltage on the sample. The simulation led to a harvested energy of 500 mj/g for an applied electric field equal to 50 kV/mm. The efficiency with respect to Carnot was raised 20%.

Ultrasonic characterization of human cancellous bone in vitro using three different apparent backscatter parameters in the frequency range 0.6-15.0 mhz

Abstract: Ultrasonic techniques based on measurements of apparent backscatter may provide a useful means for diagnosing bone diseases such as osteoporosis. The term "apparent" means that the backscattered signals are not compensated for the frequency-dependent effects of attenuation and diffraction. We performed in vitro apparent backscatter measurements on 23 specimens of human cancellous bone prepared from the left and right femoral heads of seven donors. A mechanical scanning system was used to obtain backscattered signals from each specimen at several sites. Scans were performed using five different ultrasonic transducers with center frequencies of 1, 2.25, 5, 7.5, and 10 MHz. The -6 dB bandwidths of these transducers covered a frequency range of 0.6-15.0 MHz. The backscattered signals were analyzed to determine three ultrasonic parameters: apparent integrated backscatter (AIB), frequency slope of apparent backscatter (FSAB), and time slope of apparent backscatter (TSAB). Linear regression analysis was used to examine the correlation of these ultrasonic parameters with five measured physical characteristics of the specimens: mass density, X-ray bone mineral density, Young's modulus, yield strength, and ultimate strength. A total of 75 such correlations were examined (3 ultrasonic parameters times 5 specimen characteristics times 5 transducers). Good correlations were observed for AIB using the 5 MHz (r = 0.70 - 0.89) and 7.5 MHz (r = 0.75-0.93) transducers; for FSAB using the 2.25 MHz (r = 0.70 - 0.88), 5 MHz (r = 0.79 - 0.94), and 7.5 MHz (r = 0.80 - 0.92) transducers; and for TSAB using the 5 MHz (r = 0.68 - 0.89), 7.5 MHz (r = 0.75 - 0.89), and 10 MHz (r = 0.75 - 0.92) transducers.

Phase-based ultrasonic deformation estimation

Abstract: Deformation estimation is the foundation of emerging techniques for imaging the mechanical properties of soft tissues. We present theoretical analysis and experimental results from an investigation of phase-based ultrasonic deformation estimators. Numerous phase-based algorithm variants were tested quantitatively on simulated R.F data from uniform scatterer fields, subject to a range of uniform strain deformations. Particular attention is paid to a new algorithm, weighted phase separation, the performance of which is demonstrated in application to in vivo freehand strain imaging. Good results support the theory that underlies the new algorithm, and more generally highlight the factors that should be considered in the design of high-performance deformation estimators for practical applications. For context, note that this represents progress with an algorithm class that is suitable for real-time applications, yet has already been shown quantitatively to offer greater accuracy over a wide range of scanning conditions than adaptive companding methods based on correlation coefficient or sum of absolute differences.