Showing papers in "Journal of Cleaner Production in 2009"

A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies

Abstract: Concern over the impact of anthropogenic carbon emissions on the global climate has increased in recent years due to growth in global warming awareness. Approximately 5% of global CO2 emissions originate from the manufacturing of cement, the third largest source of carbon emission in the United States. In addition to the generation of CO2 the cement manufacturing process produces millions of tons of the waste product cement kiln dust (CKD) each year contributing to respiratory and pollution health risks. In this paper LCA is used to evaluate the environmental impact of four cement manufacturing processes: (1) the production of traditional Portland cement, (2) blended cement (natural pozzolans), (3) cement where 100% of waste cement kiln dust is recycled into the kiln process, and (4) Portland cement produced when cement kiln dust (CKD) is used to sequester a portion of the process related CO2 emissions. To reduce uncertainty this manuscript presents a cradle-to-gate life-cycle assessment of several cement products. Analysis using SimaPro 6.0 software shows that blended cements provide the greatest environmental savings followed by utilization of CKD for sequestration. The recycling of CKD was found to have little environmental savings over the traditional process.

Determinant factors of corporate environmental information disclosure: an empirical study of Chinese listed companies

Abstract: In order to help understand the environmental disclosure mechanism from the corporate perspective, this paper identifies the determinant factors affecting the disclosure level of corporate environmental information on the basis of stakeholder theory, and gives an empirical observation on Chinese listed companies. The corporate environmental information disclosure (EID) level appears to be marginal in current Chinese context. Nearly 40% of the sampled companies opened no substantial environmental data to the public as could be seen from the content analysis of disclosed information. The present condition is that the EID strategy of Chinese listed companies is oriented to fill up the government's environmental concerns. The corporate EID effort is significantly relative to its environmental sensitivity (a proxy of the pressure from the government) and its size. The role of other stakeholders, like shareholders and creditors tested in this study in effecting the EID, is found to be still weak. Another interesting finding is that the sampled companies are selectively opening their environmental information. Companies operating in eastern coastal regions, where the economy has been relatively developed, are more likely to disclose emission-related data. The better the company's economic performance, the more information on environmental investment and pollution control cost is disclosed. More concerns of the firm's stakeholders on environmental issues shall be promoted in order to encourage Chinese enterprises to disclose more environmental information and accordingly become more proactive for improving their environmental performance.

Building institutions based on information disclosure: lessons from GRI's sustainability reporting

Abstract: Global Reporting Initiative (GRI) is the best-known framework for voluntary reporting of environmental and social performance by business worldwide. Using extensive empirical data, including interviews and documentary analysis, we examine GRI's organizational field and conclude that since its modest beginnings in 1999 GRI has been by several measures a successful institutionalization project. But the institutional logic of this new entity, as an instrument for corporate sustainability management, leaves out one of the central elements of the initial vision for GRI: as a mobilizing agent for many societal actors. This emergent logic reflects GRI's dominant constituency – large global companies and financial institutions and international business management consultancies – and not the less active civil society organizations and organized labor. We attribute these developments to factors such as building GRI within the existing institutional structures; the highly inclusive multistakeholder process; and the underdeveloped base of information users. From the institutional theory perspective, this case shows how the process of institutionalization is deeply affected by initial strategies of the founders, and how it reproduces existing power relations. From the governance perspective, this case leads us to question the power of commodified information to mobilize civil society and to strengthen governance based on partnerships.

Strategy development in small and medium sized enterprises for sustainability and increased value creation

Abstract: Sustainability strategies create many synergistic effects for SMEs working collaboratively, as well as systemic benefits for the commons. After setting forth the business case for sustainable SMEs, and considering SME sustainability advantages in contrast to MNEs, this paper discusses several different incentives for SMEs to optimize sustainability: (1) becoming valuable sustainable investment targets for larger firms; (2) creating highly competitive networks of sustainable SMEs in market spaces where large enterprises are less successful; (3) becoming highly efficient suppliers in global supply chains through sustainable practices. While several successful models of the sustainable SME are evolving, it may be that networks of SMEs will become essential for addressing the systemic problems that underlie industrial ecology, enterprise resilience, and global supply chain sustainability. SMEs represent the majority of all enterprises, and rapidly evolving communication technologies allow for various routes of network formation.

Applying hazardous substance management to supplier selection using analytic network process

Abstract: With increased outsourcing and environmental consciousness, this paper presents an analytic network process (ANP) approach to incorporate the issue of hazardous substance management (HSM) into supplier selection. In this study, identification of criteria of HSM competence is categorized into four dimensions, a multi-criteria decision model is proposed. ANP is then applied to supplier selection and is characterized by interdependencies among decision structure components. An illustrative example in an electronics company is presented to demonstrate how to select a most appropriate supplier in accordance with the requirements of hazardous substance for environmental regulations.

Adopting and applying eco-design techniques: a practitioners perspective

Abstract: This paper discusses the findings of a small scale research project which explored the possibility of adopting eco-design techniques. The paper focuses on identifying how eco-design techniques can be determined as being compatible with new product development processes. Via the development of a five stage ‘applicability framework’, this study demonstrates how a compatible suite of tools can be identified for application to product development processes. Testing and validation of this ‘applicability framework’, which was used to identify three key eco-design techniques; namely checklists, guidelines, and a material, energy and toxicity (MET) matrix, is shown to have taken place in relation to the development of a lightweight chemical detector product. It is established that checklists, guidelines and the MET matrix can be used both on a specific product, and also more generally in the design process. In particular, the MET matrix is shown as being used to successfully identify key environmental aspects of the product during its lifetime. The paper concludes by arguing that eco-design techniques may not have been more widely adopted by businesses because such methods are not necessarily generic and immediately applicable, but instead require some form of process-specific customisation prior to use, which can in turn act as a barrier to adoption. It is also highlighted that the shear diversity of pressures that come to bear during the product development process can also act as a barrier to adoption, and that the full integration of eco-design techniques will have to encompass approaches which overcome such pressures.

Is an environmental management system able to influence environmental and competitive performance? The case of the eco-management and audit scheme (EMAS) in the European union

Abstract: The EMAS Regulation (Reg 761/01 EC) is EU scheme implemented by the European Commission since 1993 and it is for the implementation of an Environmental Management System (EMS) by any organization. The EMS was originally proposed by the European Commission and by the ISO as the frontrunner of a series of policy tools that enable companies to simultaneously pursue environmental objectives and competitive targets in a synergetic way. Based on the unique dataset of the EVER project, this paper investigates whether or not an EMS implemented within the EMAS Regulation has any effect on firm performance both from an environmental and a competitive point of view. Our econometric analysis shows the positive impact of a welldesigned environmental management system on environmental performance and, as a consequence, on technical and organizational innovations. Effects on other competitive variables such as market performance, resource productivity and intangible assets are not strongly supported.

The Environmental Performance Strategy Map: an integrated LCA approach to support the strategic decision-making process

Abstract: Life Cycle Assessment (LCA) is a well-known tool for analyzing environmental impacts on a wide perspective with reference to a product system and the related environmental and economic impacts. The need for a novel approach that complements environmental and financial considerations is addressed in this study with the introduction of a new graphical representation: the Environmental Performance Strategy Map. This graphical map allows one to combine the main environmental indicators (footprints) with the additional dimension of cost. The paper defines the Sustainable Environmental Performance Indicator as a single measure for sustainability of a given option. Comparison of different options for strategic decision-making purposes can be enhanced and facilitated by the use of this indicator.

Environmental practices and firm performance: an empirical analysis in the Spanish hotel industry

Abstract: The impact of environmental practices on firm performance raises an ongoing debate in which the review of the existing literature yields no conclusive results. Different methods have been used to study this relationship and most of the analyses have focused on manufacturing companies. This paper examines the link between environmental practices and firm performance in the Spanish hotel industry using two methods: a cluster analysis and a regression analysis. First, three groups were defined according to their environmental proactivity, and hotels showing a stronger commitment to environmental practices proved to reach higher performance levels. Second, through the regression analysis, findings showed that environmental practices impact significantly on several performance variables.

Environmental implications of urbanization and lifestyle change in China: Ecological and Water Footprints

Abstract: Since the open door policy in 1978 China has undergone enormous economic and social changes making China to be one of the largest economies and consumers of resources in the world. The pronounced differences in income and lifestyles especially between urban and rural China were also part of China's economic rebirth. This paper explores current trajectories and scenarios for urbanization and lifestyle changes and other important socio-economic trends in China. The implications of these changes are analysed for Beijing in particular and then compared to China for the year 2020. These changes by 2020 are modelled using input–output analysis in combination with the Ecological Footprint and Water Footprint.

Development of a life cycle assessment tool for construction and maintenance of asphalt pavements

Abstract: The increasing use of recycled materials in asphalt pavements calls for environmental assessment of such impacts as the energy input and CO 2 footprint. Life cycle assessment (LCA) is being accepted by the road industry for such purpose. It aims to quantify and collate all the environmental impacts from the life time of the product or process. This paper reviews relevant LCA resources worldwide, identifies the knowledge gap for the road industry, and describes the development of an LCA model for pavement construction and maintenance that accommodates recycling and up-to-date research findings. Details are provided of both the methodology and data acquisition. This is followed by a discussion of the challenges of applying LCA to the pavement construction practice, and recommendations for further work. In the case study, the model is applied to an asphalt paving project at London Heathrow Terminal-5 (LHR), in which natural aggregates were replaced with waste glass, incinerator bottom ash (IBA) and recycled asphalt pavements (RAP). Production of hot mix asphalt and bitumen was found to represent the energy intensive processes. This is followed by data analysis and sensitivity check. Further development of the model includes expanding the database to accommodate the recycling and maintenance practice in the UK, and taking into account the effect that roadwork has on traffic emissions. The LCA model can be further tested and calibrated as a decision support tool for sustainable construction in the road industry.

Cleaner energy for sustainable future

Abstract: This special issue of the Journal of Cleaner Production focuses on “Energy for Sustainable Future”. It is designed to mirror the increasing relevance of renewable energy sources and improved efficiency as crucial topics for practitioners in industry, for governmental policy makers, as well as for civic service providers, researchers, and educators. The purpose of this special issue is to serve as a catalyst for dialogue. The global warming related to CO2 emissions, coupled with steeply rising energy prices and the recent global financial institutional melt-down are causing massive societal concerns and give rise to increasing demand for ways to improve societal and individual energy efficiency and for ways to shift increasingly to alternative, low or non-carbon based energy systems. Until recently, industrial energy efficiency improvements have focused on improvements on efficiency rather than on the integration of renewable sources. The aim of this special issue is the identification of policies to support the development and implementation of technologies and management approaches we can employ to make the transition to more sustainable societies. The collection of papers in this special issue provide a foundation for students, researchers, scholars, practitioners and policy makers interested in making sustainable development more than a metaphor. The papers include focus upon ways for: (a) Improving industrial process to achieve improvements in energy efficiency. (b) Minimising waste disposals and reducing their impact through better management. (c) Reducing CO2 emissions by making progress toward lower carbon, renewable energy based systems, (d) Improving production of biofuels and hydrogen production systems, facilitated by employing cleaner production and novel LCA tools. (e) Improving integration of advanced materials and energy efficient equipment in different industrial sectors. Current and future developments in national and world economies are closely connected to sustainable, efficient and safe usage of raw materials and upon energy based on cleaner production concepts and approaches that are ecologically and economically appropriate for the short and for the long-term future of society. These challenges have received considerable attention in the media and scientific journals over the last several years. The idea of developing a specialised conference focussed upon them was put forward on various occasions. Focus upon them became reality on the 5th and 6th May 2008 in the historic Castle of Veszprem, Hungary, the current premises of the Hungarian Academy of Science which hosted the Workshop. The Workshop was a stimulating event and an overwhelming success, with nearly 100 contributors from Africa, North America, Asia and Europe, representing 28 countries. After a comprehensive selection and thorough reviewing procedure 11 papers were selected for this special issue.

How integrated are environmental, quality and other standardized management systems? An empirical study ☆

Abstract: The aim of this article is to analyze the extent to which environmental management systems are really integrated with the quality and other standardized management systems implemented in organizations. To this end, an empirical study was carried out on 435 companies that were registered to multiple management system standards, including ISO 14001: 2004 and ISO 9001: 2000 at the minimum. Overall, 362 of those organizations indicated that they had integrated all or at least some of their standardized management systems. Results from the cluster analysis show three types of organizations in function of their level of integration of management system goals, documentation and human resources, as well as procedures. The results also illustrate which particular management system components are integrated and to what degree.

Product life-cycle implications for remanufacturing strategies

Abstract: For remanufacturing to be successful, there is a need to gain information on future market needs of remanufactured products, and match this to information on the magnitude of return flows. One of the major issues impacting remanufacturing is in the difficulty of obtaining used products (cores) that are suitable for remanufacturing. The timing and quantity of product returns is dependent on the type of product. Factors such as the mean product lifetime, rate of technical innovation, and failure rate of components all influence the return rate of products from end-of-use and end-of-life. The balance between product returns and demand for remanufactured products is a function of many variables, where the rate of technological innovation and the expected life of a product are the major influencing characteristics. The main contribution of this paper is the support that is provided in different supply and demand situations. By using a product life-cycle perspective, the supply and demand situations can be foreseen, and support given regarding possible strategies in these situations.

Decisions to reduce greenhouse gases from agriculture and product transport: LCA case study of organic and conventional wheat

Abstract: A streamlined hybrid life cycle assessment is conducted to compare the global warming potential (GWP) and primary energy use of conventional and organic wheat production and delivery in the US. Impact differences from agricultural inputs, grain farming, and transport processes are estimated. The GWP of a 1 kg loaf of organic wheat bread is about 30 g CO2-eq less than the conventional loaf. When organic wheat is shipped 420 km farther to market, organic and conventional wheat systems have similar impacts. These results can change dramatically depending on soil carbon accumulation and nitrous oxide emissions from the two systems. Key parameters and their variability are discussed to provide producers, wholesale and retail consumers, and policymakers metrics to align their decisions with low-carbon objectives.

Consumer attitudes regarding environmentally sustainable wine: an exploratory study of the New Zealand marketplace

Abstract: Previous research has suggested that consumers are becoming increasingly concerned by the effects of conventional agricultural food production practices on human health and environmental wellbeing. This study sought to understand whether environmentally sustainable practices in the vineyard would equate to advantages in the wine marketplace. Structured questionnaires were used to ascertain the views of wine consumers in Christchurch, New Zealand. The findings of this study indicate that consumers have a strong demand for wine which is produced using “green” production practices. Consumers believe that the quality of sustainable wine will be equal to or better than conventionally produced wine, and they are prepared to pay a higher price for this wine.

Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method

Abstract: The alkaline conditions for extraction of natural dye from Henna leaves were optimized and the resulting extract was used to further optimize its dyeing conditions on cotton by exhaust method Dyeings without any mordant were compared with those obtained with premordanting and postmordanting with alum and iron It was found that dyeings produced with alkaline extracts of Henna leaves have better colour strength than the dye extracts obtained in distilled water Furthermore, dyeings with alkaline extracts have moderate to good fastness properties and that mordanting did not result in any significant improvement in fastness properties Finally, in comparative studies between synthetic and this natural dye, it was inferred that natural dye has good potential to act as co-partner with synthetic dye

EKC analysis for studying economic growth and environmental quality: a case study in China

Abstract: Compared with the extensive research on the relationship between economic growth and environmental quality in developed countries, there is a paucity of an empirical research on studying the relation for developing countries. Based upon the Environmental Kuznets Curve (EKC) theory, this paper develops regression models for investigating the relationship between economic growth and environmental quality in China. The EKC analysis based on six pollution indices is illustrated with a case study in Jiaxing of Zhejiang, China.

Remanufacturing for the automotive aftermarket-strategic factors: literature review and future research needs

Abstract: While the concepts of remanufacturing and reverse logistics are gaining popularity in practice, the available literature and theory on strategic decision making in these areas are limited. This paper is designed to address this gap, in particular, for the automotive industry aftermarket. In doing so, the authors reviewed literature pertaining to: customer demand(s), product design and development, cost-benefit analysis of reman, core (i.e., used product) supply management, reman competencies and skills, product life cycle strategies, reman and reverse logistics network design, relationships among key stakeholders, environmental considerations, regulations, and impact of emerging economies. The literature findings along with our experience in working with automotive reman products were used as inputs to guide the formulation of seven major propositions for the strategic factors in decision making within reman. The propositions were then tested through a case study. The case study reconfirmed many of the factors like product life cycle, regulations, etc. from the literature review and also identified new factors like OE customer requirements. Our results provide a foundation for further research for companies that deal with Original Equipment (OE) Sales, Original Equipment Service (OES), as well as Independent Aftermarket (IAM) business in the automotive industry.

Assessing alternative aquaculture technologies: life cycle assessment of salmonid culture systems in Canada

Abstract: This study employed life cycle assessment (LCA) to quantify and compare the potential environmental impacts of culturing salmonids in a conventional marine net-pen system with those of three reportedly environmentally-friendly alternatives; a marine floating bag system; a land-based saltwater flow-through system; and a land-based freshwater recirculating system. Results of the study indicate that while the use of these closed-containment systems may reduce the local ecological impacts typically associated with net-pen salmon farming, the increase in material and energy demands associated with their use may result in significantly increased contributions to several environmental impacts of global concern, including global warming, non-renewable resource depletion, and acidification. It is recommended that these unanticipated impacts be carefully considered in further assessments of the sustainability of closed-containment systems and in ongoing efforts to develop and employ these technologies on a larger scale.

Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources

Abstract: If Europe is serious about reaching its target to keep global mean temperature increase below 2 °C, it must strive for a 100% renewable electricity system by 2050. The SuperSmart Grid approach combines what is often perceived as two exclusive alternatives: wide area power generation and decentralised power generation. We argue that by combining these, in fact, complementary measures, it is possible to address the crucial issue of renewable generation—fluctuating supply—in a comprehensive as well as in a technologically and economically viable manner. Thus, the SuperSmart Grid simultaneously can contribute to energy security, climate security, social security, and national security.

The energy and carbon intensity of wine distribution: A study of logistical options for delivering wine to consumers

Abstract: Logistics within the food and beverage sector are often energy-intensive, especially for the wine industry. We consider how California wines may be routed to U.S. consumers near and far, basing scenarios and supporting data on interviews and literature review. We use a web-based tool, CargoScope, to calculate the energy and carbon emissions associated with each transportation link and storage echelon. We find that supply chain configurations can result in vastly different energy and emissions' profiles, varying by up to a factor of 80, and discuss how these results could be incorporated into a winery's overall sustainability strategy.

Assessment of the environmental profile of PLA, PET and PS clamshell containers using LCA methodology

Abstract: Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.

Comparing the implementation of concrete recycling in the Australian and Japanese construction industries

Abstract: Environmental problems have been considered to be serious in the construction industry. Waste management pressures are pressing very hard with alarming industrial warming signals. Among the different types of construction and demolition wastes, concrete is about 81 percent of the volume of construction and demolition waste in Australia. To minimize the concrete waste generated from construction activities, recycling of concrete waste is one of the best methods to improve the environment. However, situations of concrete recycling in different countries vary considerably. Japan is a leading country in recycling concrete waste, with 100 percent recycling of the wastes that are used for new structural applications. This paper investigates the current concrete recycling situations in Australian and Japanese construction industries. A questionnaire survey and structured interviews were conducted. In comparing the current concrete recycling situations between Australia and Japan, it should be noted that major difficulties found from Australian and Japanese construction industries are on different phases of the transition to recycling of construction wastes. Therefore, it is suggested that the Australian construction industry should be: i) developing a unified policy in concrete recycling; ii) providing financial governmental support; iii) developing clear technical specifications or standards on the use of recycled aggregate for structural applications.

Recovery of organic wastes in the Spanish wine industry. Technical, economic and environmental analyses of the composting process.

Abstract: The main organic wastes produced in modern wine industries include grape pomace (62%), lees (14%), stalk (12%) and dewatered sludge (12%). Some of these wastes are being used as by-products (grape pomace and lees) whereas the rest of organic wastes (stalk and wastewater sludge) has been traditionally incinerated or disposed in landfill. In this work, composting is proposed for the recovery of stalk and wastewater sludge to produce a sanitized organic amendment for application in the vineyard, closing the organic matter cycle. The environmental and economical analyses of the different alternatives to manage organic wastes from the wine industry are also presented. Composting costs are almost negligible when compared to other management options. From the environmental point of view, in-situ composting presents the best performance in 8 of the 10 impact categories analysed. Finally, the energy balance shows that the 4 composting systems involved less energy than the systems based on Mineral Fertilizer consumption.

Sustainability in the New Zealand wine industry: drivers, stakeholders and practices

Abstract: This research aims to investigate various sustainability issues in the New Zealand wine industry. Namely, the study examines (1) what drives the industry to engage in sustainability practices, (2) the role of stakeholders in the company's decision-making, and (3) environmental practices related to water utilization, chemicals and waste management. A qualitative research approach supplemented by quantitative measures was adopted to answer the research questions. Twenty-four wineries were studied. The research found that the most important drivers for sustainable practices are personal values, preferences and satisfaction with the profession (i.e., enjoyment of the work itself), followed by product quality and customers' demand. Size of firm also appears to be an important factor. New Zealand wine companies are also driven by the market, but companies do not receive a price premium for grapes grown sustainably or organically grown. The study proposes a typology matrix that differentiates wineries' involvement in sustainability based on the extent of sustainability practices and sustainability drivers.

Finding the connection: environmental management systems and environmental performance

Abstract: With more than 130,000 organizations worldwide certified according to ISO requirements, business people, regulatory authorities and other stakeholders have reason to wonder whether the purpose of ISO 14001, which is to help improve environmental performance, is being fulfilled. There is a growing body of literature attempting to answer this question. The results, however, are inconclusive. This meta-study analyzes a pool of 23 studies connecting environmental performance to environmental management systems. It shows that the reason that earlier studies arrived at mixed conclusions is twofold. Firstly, there is no agreement on what environmental performance is or how to measure it. Secondly, there is neither clarity nor agreement about how or why environmental management systems are expected to aid performance. It is therefore unclear whether the mechanisms that lead to improvement are expected to be the same for all companies or dependent on each implementation. The authors conclude that it is more fruitful to research how environmental management systems affect performance, rather than whether they do so or not. The recommended starting point for such studies is environmental performance as each organization defines it. This in turn implies a case by case approach and a need for much more research in the field.

Sustainability criteria for bioenergy systems: results from an expert survey

Abstract: Environmental impacts associated with the use of fossil fuels, rising prices, potential limitations in supply and concerns about regional and national security are driving the development and use of biomass for bioenergy, biofuels and bioproducts. However, the use of biomass does not automatically imply that its production, conversion and use are sustainable. In order to operationalize sustainability assessments of biomass systems, it is crucial to identify critical criteria, but keep their number and measurement at a manageable level. The selection of these criteria can vary depending on individual's expertise, geographical region where they work, and spatial scale they are focused on. No clear consensus has yet emerged on what experts consider as critical indicators of sustainability. Objectives of this paper were to analyze how key experts perceive the 35 sustainability criteria for bioenergy found in emerging sustainability assessment frameworks and to identify levels of agreement and uncertainty. Experts were asked to rate the criteria for attributes of relevance, practicality, reliability, and importance. Perceptions of the importance of the 35 criteria varied among the experts surveyed. Only two criteria, energy balance and greenhouse gas balance, were perceived as critical by more than half of the respondents. Social criteria and locally applied criteria were generally ranked low for all four attributes. Seven of the 12 criteria scored as most important focused on environmental issues, four were social and only one was economic. Of the 12 most important criteria, seven were ranked low in practicality and reliability indicating that mechanisms to assess a number of important criteria need to be developed. The spatial scale the experts worked at and their profession explained most of the differences in importance ranking between experts, while regional focus had minimal effect. Criteria that were ranked low for importance, were characterized by a lack of consensus, suggesting the need for further debate regarding their inclusion in sustainability assessments. Outcomes of the survey provide a foundation for further discussions and development of sustainability assessments for bioenergy systems and may also provide a basis for assessing individual bioenergy projects within their specific geographic, ecological, societal, and technological context and scale.

Environmental consideration in procurement of construction contracts: current practice, problems and opportunities in green procurement in the Swedish construction industry

Abstract: Research and initiatives concerning green procurement have to a great extent focused on products. This article, however, explores the current practice, problems and opportunities of green procureme ...

Assessment of the environmental impact of carnivorous finfish production systems using life cycle assessment.

Abstract: When evaluating the environmental impacts of finfish production systems, both regional impacts (e.g., eutrophication) and global impacts (e.g., climate change) should be taken into account. The life cycle assessment (LCA) method is well suited for this purpose. Three fish farms that represent contrasting intensive production systems were investigated using LCA: rainbow trout (Oncorhynchus mykiss) in freshwater raceways in France, sea-bass (Dicentrarchus labrax) in sea cages in Greece, and turbot (Scophtalmus maximus) in an inland re-circulating system close to the seashore in France. Two main characteristics differentiated the three farm systems: feed use and energy use. Emission of nitrogen and phosphorus accounted for more than 90% of each farm's potential eutrophication impact. In the trout and sea-bass systems, feed production was the major contributor to potential climate change and acidification impacts and net primary production use (NPPU). In these systems, the main source of variation for environmental impacts was the feed conversion ratio. Results from this study indicate that the sea-bass cage system was less efficient than the trout raceway system, with a higher level of potential eutrophication (65% greater) and NPPU (15% greater). The turbot re-circulating system was a high energy-consumer compared to the trout raceway system (four times higher) and the sea-bass cage system (five times higher). Potential climate change and acidification impacts were largely influenced by energy consumption in the turbot re-circulating system. In the turbot re-circulating system 86% of energy use was due to on-site consumption, while in the sea-bass cage farming system 72% of energy use was due to feed production. These results are discussed in relation to regional contexts of production and focus attention on the sensitivity of each aquatic environment and the use of energy carriers.