Journal of Geotechnical and Geoenvironmental Engineering 

About: Journal of Geotechnical and Geoenvironmental Engineering is an academic journal published by American Society of Civil Engineers. The journal publishes majorly in the area(s): Pile & Liquefaction. It has an ISSN identifier of 1090-0241. Over the lifetime, 6056 publications have been published receiving 242440 citations. The journal is also known as: ASCE journal of geotechnical and geoenvironmental engineering.

Liquefaction Resistance of Soils: Summary Report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of Soils

Abstract: Following disastrous earthquakes in Alaska and in Niigata, Japan in 1964, Professors H. B. Seed and I. M. Idriss developed and published a methodology termed the ''simplified procedure'' for evaluating liquefaction resistance of soils. This procedure has become a standard of practice throughout North America and much of the world. The methodology which is largely empirical, has evolved over years, primarily through summary papers by H. B. Seed and his colleagues. No general review or update of the procedure has occurred, however, since 1985, the time of the last major paper by Professor Seed and a report from a National Research Council workshop on liquefaction of soils. In 1996 a workshop sponsored by the National Center for Earthquake Engineering Research (NCEER) was convened by Professors T. L. Youd and I. M. Idriss with 20 experts to review developments over the previous 10 years. The purpose was to gain consensus on updates and augmen- tations to the simplified procedure. The following topics were reviewed and recommendations developed: (1) criteria based on standard penetration tests; (2) criteria based on cone penetration tests; (3) criteria based on shear-wave velocity measurements; (4) use of the Becker penetration test for gravelly soil; (4) magnitude scaling factors; (5) correction factors for overburden pressures and sloping ground; and (6) input values for earthquake magnitude and peak acceleration. Probabilistic and seismic energy analyses were reviewed but no recommen- dations were formulated.

Empirical Strength Criterion for Rock Masses

Abstract: An empirical strength criterion for rocks and rock masses is proposed. The nonlinear criterion includes the uniaxial compressive strength of the intact rock material and introduces two dimensionless parameters, m and s. The parameter m varies with rock type, the angle of interblock or interparticle friction and the degree of block or particle interlock. The parameter s varies from 1.0 for intact rock material to zero for granular aggregates and depends on the interparticle tensile strength and the degree of interlock within the rock mass. For anisotropic rock, both m and s vary with the orientations of the planes of weakness to the principal stress directions. Approximate relationships between rock type, rock mass quality indices, and the rock mass strength parameters m and s, are presented. These relationships have been found useful in preliminary design calculations for slopes and underground excavations in jointed rock.

Particle Shape Effects on Packing Density, Stiffness, and Strength: Natural and Crushed Sands

Abstract: The size and shape of soil particles reflect the formation history of the grains. In turn, the macroscale behavior of the soil mass results from particle level interactions which are affected by particle shape. Sphericity, roundness, and smoothness characterize different scales associated with particle shape. New experimental data and results from published studies are gathered into two databases to explore the effects of particle shape on packing density and on the small-to-large strain mechanical properties of sandy soils. In agreement with previous studies, these data confirm that increased angularity or eccentricity produces an increase in emax and emin. Furthermore, the data show that increasing particle irregularity causes a decrease in stiffness yet heightened sensitivity to the state of stress; an increase in compressibility under zero-lateral strain loading; an increase in the critical state friction angle cs; and an increase in the intercept of the critical state line there is a weak effect on the slope . Therefore, particle shape emerges as a significant soil index property that needs to be properly characterized and documented, particularly in clean sands and gravels. The systematic assessment of particle shape will lead to a better understanding of sand behavior.

Microbially Induced Cementation to Control Sand Response to Undrained Shear

Abstract: Current methods to improve the engineering properties of sands are diverse with respect to methodology, treatment uniformity, cost, environmental impact, site accessibility requirements, etc. All of these methods have benefits and drawbacks, and there continues to be a need to explore new possibilities of soil improvement, particularly as suitable land for development becomes more scarce. This paper presents the results of a study in which natural microbial biological processes were used to engineer a cemented soil matrix within initially loose, collapsible sand. Microbially induced calcite precipitation (MICP) was achieved using the microorganism Bacillus pasteurii, an aerobic bacterium pervasive in natural soil deposits. The microbes were introduced to the sand specimens in a liquid growth medium amended with urea and a dissolved calcium source. Subsequent cementation treatments were passed through the specimen to increase the cementation level of the sand particle matrix. The results of both MICP- and ...

Factors of safety and reliability in geotechnical engineering

Abstract: Simple reliability analyses, involving neither complex theory nor unfamiliar terms, can be used in routine geotechnical engineering practice. These simple reliability analyses require little effort beyond that involved in conventional geotechnical analyses. They provide a means of evaluating the combined effects of uncertainties in the parameters involved in the calculations, and they offer a useful supplement to conventional analyses. The additional parameters needed for the reliability analyses—standard deviations of the parameters—can be evaluated using the same amount of data and types of correlations that are widely used in geotechnical engineering practice. Example applications to stability and settlement problems illustrate the simplicity and practical usefulness of the method.