Journal of Mass Spectrometry 

About: Journal of Mass Spectrometry is an academic journal published by Wiley. The journal publishes majorly in the area(s): Mass spectrometry & Mass spectrum. It has an ISSN identifier of 1076-5174. Over the lifetime, 11024 publications have been published receiving 237350 citations. The journal is also known as: JMS.

MassBank: a public repository for sharing mass spectral data for life sciences.

Abstract: MassBank is the first public repository of mass spectra of small chemical compounds for life sciences (<3000 Da). The database contains 605 electron-ionization mass spectrometry (EI-MS), 137 fast atom bombardment MS and 9276 electrospray ionization (ESI)-MS(n) data of 2337 authentic compounds of metabolites, 11 545 EI-MS and 834 other-MS data of 10,286 volatile natural and synthetic compounds, and 3045 ESI-MS(2) data of 679 synthetic drugs contributed by 16 research groups (January 2010). ESI-MS(2) data were analyzed under nonstandardized, independent experimental conditions. MassBank is a distributed database. Each research group provides data from its own MassBank data servers distributed on the Internet. MassBank users can access either all of the MassBank data or a subset of the data by specifying one or more experimental conditions. In a spectral search to retrieve mass spectra similar to a query mass spectrum, the similarity score is calculated by a weighted cosine correlation in which weighting exponents on peak intensity and the mass-to-charge ratio are optimized to the ESI-MS(2) data. MassBank also provides a merged spectrum for each compound prepared by merging the analyzed ESI-MS(2) data on an identical compound under different collision-induced dissociation conditions. Data merging has significantly improved the precision of the identification of a chemical compound by 21-23% at a similarity score of 0.6. Thus, MassBank is useful for the identification of chemical compounds and the publication of experimental data.

The Orbitrap: a new mass spectrometer

Abstract: Research areas such as proteomics and metabolomics are driving the demand for mass spectrometers that have high performance but modest power requirements, size, and cost. This paper describes such an instrument, the Orbitrap, based on a new type of mass analyzer invented by Makarov. The Orbitrap operates by radially trapping ions about a central spindle electrode. An outer barrel-like electrode is coaxial with the inner spindlelike electrode and mass/charge values are measured from the frequency of harmonic ion oscillations, along the axis of the electric field, undergone by the orbitally trapped ions. This axial frequency is independent of the energy and spatial spread of the ions. Ion frequencies are measured non-destructively by acquisition of time-domain image current transients, with subsequent fast Fourier transforms (FFTs) being used to obtain the mass spectra. In addition to describing the Orbitrap mass analyzer, this paper also describes a complete Orbitrap-based mass spectrometer, equipped with an electrospray ionization source (ESI). Ions are transferred from the ESI source through three stages of differential pumping using RF guide quadrupoles. The third quadrupole, pressurized to less than 10(-3) Torr with collision gas, acts as an ion accumulator; ion/neutral collisions slow the ions and cause them to pool in an axial potential well at the end of the quadrupole. Ion bunches are injected from this pool into the Orbitrap analyzer for mass analysis. The ion injection process is described in a simplified way, including a description of electrodynamic squeezing, field compensation for the effects of the ion injection slit, and criteria for orbital stability. Features of the Orbitrap at its present stage of development include high mass resolution (up to 150,000), large space charge capacity, high mass accuracy (2-5 ppm), a mass/charge range of at least 6000, and dynamic range greater than 10(3). Applications based on electrospray ionization are described, including characterization of transition-metal complexes, oligosaccharides, peptides, and proteins. Use is also made of the high-resolution capabilities of the Orbitrap to confirm the presence of metaclusters of serine octamers in ESI mass spectra and to perform H/D exchange experiments on these ions in the storage quadrupole.

Ion mobility-mass spectrometry.

Abstract: This review article compares and contrasts various types of ion mobility-mass spectrometers available today and describes their advantages for application to a wide range of analytes. Ion mobility spectrometry (IMS), when coupled with mass spectrometry, offers value-added data not possible from mass spectra alone. Separation of isomers, isobars, and conformers; reduction of chemical noise; and measurement of ion size are possible with the addition of ion mobility cells to mass spectrometers. In addition, structurally similar ions and ions of the same charge state can be separated into families of ions which appear along a unique mass-mobility correlation line. This review describes the four methods of ion mobility separation currently used with mass spectrometry. They are (1) drift-time ion mobility spectrometry (DTIMS), (2) aspiration ion mobility spectrometry (AIMS), (3) differential-mobility spectrometry (DMS) which is also called field-asymmetric waveform ion mobility spectrometry (FAIMS) and (4) traveling-wave ion mobility spectrometry (TWIMS). DTIMS provides the highest IMS resolving power and is the only IMS method which can directly measure collision cross-sections. AIMS is a low resolution mobility separation method but can monitor ions in a continuous manner. DMS and FAIMS offer continuous-ion monitoring capability as well as orthogonal ion mobility separation in which high-separation selectivity can be achieved. TWIMS is a novel method of IMS with a low resolving power but has good sensitivity and is well intergrated into a commercial mass spectrometer. One hundred and sixty references on ion mobility-mass spectrometry (IMMS) are provided.

Contributions of mass spectrometry to peptide and protein structure.

Abstract: With the advent of recombinant deoxyribonucleic acid (DNA) technology which allows a wide range of manipulation of genes and their expression in cell lines other than the natural ones, many aspects of protein structure have become more important than ever. In addition to the determination of the amino acid sequence questions relating to homogeneity, the nature of post-translational modifications, the verification of the structure of a protein produced by a synthetically modified gene or the detection of a natural mutant are all questions that are more and more frequently asked and with the demand for more detail. Mass spectrometry has emerged as an important contributor to this field, particularly since the advent of fast atom bombardment (FAB) ionization, which makes it possible to ionize directly large polar molecules such as peptides and small proteins. As such, FAB mass spectrometry provides mainly molecular weight information which, in itself, often sufficies to answer certain questions, particularly because the mass of many peptides can be determined directly from a single mass spectrum of a mixture. However, in order to obtain detailed structural information, such as the amino acid sequence, fragmentation has to be induced by collision processes and the product ions separated, preferably in the second mass spectrometer of a tandem system. This approach is particularly suited for the determination of the sequence of N-blocked peptides and the nature of the blocking group; the type and location of modified (i.e. phosphorylated, sulfated, glycosylated) amino acids; detection or verification of amino acid replacements; confirmation of the structure of synthetic peptides; and last but not least, the determination of the primary structure of proteins.

Mobile and localized protons: a framework for understanding peptide dissociation

Abstract: Protein identification and peptide sequencing by tandem mass spectrometry requires knowledge of how peptides fragment in the gas phase, specifically which bonds are broken and where the charge(s) resides in the products. For many peptides, cleavage at the amide bonds dominate, producing a series of ions that are designated b and y. For other peptides, enhanced cleavage occurs at just one or two amino acid residues. Surface-induced dissociation, along with gas-phase collision-induced dissociation performed under a variety of conditions, has been used to refine the general 'mobile proton' model and to determine how and why enhanced cleavages occur at aspartic acid residues and protonated histidine residues. Enhanced cleavage at acidic residues occurs when the charge is unavailable to the peptide backbone or the acidic side-chain. The acidic H of the side-chain then serves to initiate cleavage at the amide bond immediately C-terminal to Asp (or Glu), producing an anhydride. In contrast, enhanced cleavage occurs at His when the His side-chain is protonated, turning His into a weak acid that can initiate backbone cleavage by transferring a proton to the backbone. This allows the nucleophilic nitrogen of the His side-chain to attack and form a cyclic structure that is different from the 'typical' backbone cleavage structures.