Showing papers in "Journal of Materials Science & Technology in 2009"

TL;DR: A review of current research activities that concentrate on Ti(3)SiC(2) can be found in this article, where the authors provide an overview of the crystal and electronic structures, which are the basis to understand this material.

TL;DR: In this paper, 1Doxide nanomaterials are represented as follows: ZnO, SnO, In_2O_3, Ga2O, Ga3, SiO_x, MgO, and Al2O.3.

TL;DR: In this article, an attempt has been made to study the influence of wear parameters like applied load, sliding speed, sliding distance and percentage of reinforcement on the dry sliding wear of the metal matrix composites.

TL;DR: A survey of various methods for generating 1D nanomaterials and nanostructures can be found in this article, which mainly focuses on structures, synthesis, characterization, formation mechanisms and optical property tuning, and luminescence mechanisms of 1D ZnS nano-structures.

TL;DR: Changhui Ye as mentioned in this paper studied Materials Science at the University of Science and Technology of China, where he obtained his B.S. and M.S degrees in 1997 and 2000, respectively.

TL;DR: In this paper, the authors used the combination of atomic-resolution Z-contrast scanning transmission electron microscopy (STEM), selected area electron diffraction (SAED), and convergent beam electron difforescence (CBED) to link microstructures of materials to macroscopic properties, allowing layered ternary ceramics to be investigated in an unprecedented detail.

TL;DR: In this paper, the authors propose a cladding X65 cladding called GMAW, i.e., i.i.d.width of the cladding material.

TL;DR: In this article, fracture mechanics and crack propagation have been obtained, making use of Vickers microhardness studies on two different crystallographic planes (110 and (001)) of flux grown erbium aluminate crystals in the load ranging from 10-100 g.

TL;DR: Sun et al. as discussed by the authors have published more than 150 peer-reviewed journal publications, which include 2 papers in Nano Lett., 1 paper in Phys. Rev. Lett.

TL;DR: It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the beta-TCP coated porous Mg, which indicates that the Beta-TCPs is promising to be a bone tissue engineering scaffold material.

TL;DR: In this article, Ni et al. describe anisotropic anisotropy in the context of 3Al and NiAl, and propose NiAl and 3Al 2.0.

TL;DR: In this article, the authors used the Ti-6AI-4V (4.5 g/cm~3 ) to test the performance of GTA-6.5.

TL;DR: Based on the rule of mixtures, a mathematical model, which correlates the impact energy of functionally graded steels to the individual layers through Vickers microhardness of the layers, was presented as mentioned in this paper.

TL;DR: In the 0.2%proof range as mentioned in this paper, 0.25～ 0.75 wt wt ǫ in the range of 0.5 wt.

TL;DR: In this paper, an experimental study was carried out on the strain cycliccharacteristics and ratcheting of 316L stainless steel subjected to uniaxial and multi-aixial cyclic loading.

TL;DR: In this article, the authors proposed a MMC composites composites (MMC) for solid-gas-liquid (SGLC) applications and showed that solid gas-liquid composites can be used in solid gas liquids.

TL;DR: In this paper, the authors measured the distribution of trace element Bi in the weld and monitored the change of arc voltageduring A-TIG welding of stainless steel 0Crl8Ni9 with fluxes SiO2 and TiO2.

TL;DR: In this article, a combustion reaction was used to synthesize a 3TiO(2)-5Al-2C system, which was obtained at the molar ratio of TiO2:Al:C=3.0:5.0 similar to 5.1:1.8.

TL;DR: The hydrophobicity of silica aerogels is investigated in this article, where the authors show that they can reach 350 °C with 350°C with silicone aerogel.

TL;DR: In this paper, the authors provide a dense review of the state-of-the-art research activities in one-dimensional (1D) ZnS-based hetero-, core/shell and hierarchical nanostructures.

TL;DR: In this paper, the alpha-Al8Fe2Si (alpha) and the beta-Al5FeSi (beta) were used to test the performance of the alpha.