Journal•ISSN: 0265-2048
Journal of Microencapsulation
Informa
About: Journal of Microencapsulation is an academic journal published by Informa. The journal publishes majorly in the area(s): Drug carrier & Dosage form. It has an ISSN identifier of 0265-2048. Over the lifetime, 2249 publications have been published receiving 66754 citations.
Topics: Drug carrier, Dosage form, Microparticle, PLGA, Controlled release
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, Urea-formaldehyde microcapsules containing dicyclopentadiene were prepared by in situ polymerization in an oil-in-water emulsion that meet these requirements for self-healing epoxy.
Abstract: Microencapsulated healing agents that possess adequate strength, long shelf-life and excellent bonding to the host material are required for self-healing materials. Urea-formaldehyde microcapsules containing dicyclopentadiene were prepared by in situ polymerization in an oil-in-water emulsion that meet these requirements for self-healing epoxy. Microcapsules of 10-1000 microm in diameter were produced by appropriate selection of agitation rate in the range of 200-2000 rpm. A linear relation exists between log(mean diameter) and log(agitation rate). Surface morphology and shell wall thickness were investigated by optical and electron microscopy. Microcapsules are composed of a smooth 160-220 nm inner membrane and a rough, porous outer surface of agglomerated urea-formaldehyde nanoparticles. Surface morphology is influenced by pH of the reacting emulsion and interfacial surface area at the core-water interface. High yields (80-90%) of a free flowing powder of spherical microcapsules were produced with a fill content of 83-92 wt% as determined by CHN analysis.
751 citations
TL;DR: Urea-formaldehyde microcapsules containing dicyclopentadiene were prepared by in situ polymerization in an oil-in-water emulsion that meet these requirements for self-healing epoxy.
Abstract: Microencapsulated healing agents that possess adequate strength, long shelf-life and excellent bonding to the host material are required for self-healing materials. Urea-formaldehyde microcapsules containing dicyclopentadiene were prepared by in situ polymerization in an oil-in-water emulsion that meet these requirements for self-healing epoxy. Microcapsules of 10–1000 μm in diameter were produced by appropriate selection of agitation rate in the range of 200–2000 rpm. A linear relation exists between log(mean diameter) and log(agitation rate). Surface morphology and shell wall thickness were investigated by optical and electron microscopy. Microcapsules are composed of a smooth 160–220 nm inner membrane and a rough, porous outer surface of agglomerated urea-formaldehyde nanoparticles. Surface morphology is influenced by pH of the reacting emulsion and interfacial surface area at the core-water interface. High yields (80–90%) of a free flowing powder of spherical microcapsules were produced with a fill content of 83–92 wt% as determined by CHN analysis.
577 citations
TL;DR: The present article provides a literature review of different microencapsulation techniques and different factors influencing the encapsulation efficiency of the micro Encapsulation technique.
Abstract: Microencapsulation is one of the quality preservation techniques of sensitive substances and a method for production of materials with new valuable properties. Microencapsulation is a process of enclosing micron-sized particles in a polymeric shell. There are different techniques available for the encapsulation of drug entities. The encapsulation efficiency of the microparticle or microsphere or microcapsule depends upon different factors like concentration of the polymer, solubility of polymer in solvent, rate of solvent removal, solubility of organic solvent in water, etc. The present article provides a literature review of different microencapsulation techniques and different factors influencing the encapsulation efficiency of the microencapsulation technique.
529 citations
TL;DR: In vivo and in vitro drug release from these microcapsules is reviewed and problems associated with the different microencapsulation techniques using PLA or PLCG are reviewed.
Abstract: Poly(lactic acid) [PLA] and its co-polymers with glycolic acid [PLCG] have been known to be biodegradable and histocompatible for the past 20 years. Their physico-chemical and biological properties have been found suitable, in many instances, for sustaining drug release in vivo for days or months. Several dosage forms for parenteral administration have been investigated using these polymers and a microencapsulation technique is chosen frequently for its unique properties. There are a limited number of published papers concerning preparation and characterization of PLA or PLCG microcapsules, possibly because of commercial unavailability and difficulties in the synthesis of reproducible batches of these polymers. However, microcapsules can be made using different traditional and non-traditional techniques containing core materials ranging from biological proteins to synthetic drugs. An attempt is made here to review problems associated with the different microencapsulation techniques using PLA or PLCG. In vivo and in vitro drug release from these microcapsules is also reviewed.
455 citations
TL;DR: Twelve superparamagnetic Magnetite-Dextran nanoparticles potentially useful as contrast agents for Magnetic Resonance Imaging (MRI), with different sizes, charges and surface natures, were produced and internally labelled with (59)Fe in order to investigate the effect of their physicochemical properties on their biodistribution in mice.
Abstract: Twelve superparamagnetic Magnetite-Dextran (MD) nanoparticles potentially useful as contrast agents for Magnetic Resonance Imaging (MRI), with different sizes, charges and surface natures, were pro...
453 citations