Showing papers in "Journal of Nanoscience and Nanotechnology in 2008"

Electronic properties of semiconductor nanowires.

Abstract: This paper provides a review of the state-of-the-art electronic-structure calculations of semiconductor nanowires. Results obtained using empirical k.p, empirical tight-binding, semi-empirical pseudopotential, and with ab initio methods are compared. For conciseness, we will restrict our detailed discussions to free-standing plain and modulated nanowires. Connections to relevant experimental data, particularly band gaps and polarization anisotropy, will be made since these results depend crucially on the electronic properties. For completeness, a brief review on the synthesis of nanowires is included.

Superparamagnetism and other magnetic features in granular materials: A review on ideal and real systems

Abstract: An overview on magnetic of nanostructured magnetic materials is presented, with particular emphasis on the basic features displayed by granular nanomagnetic solids. Besides a review of the basic concepts and experimental techniques, the role of structural disorder (mainly the distribution of grain sizes), interparticle magnetic interactions and surface effects are also discussed with some detail. Recent results, models and trends on the area are also discussed.

Exchange bias phenomenology and models of core/shell nanoparticles.

Abstract: Some of the main experimental observations related to the occurrence of exchange bias in magnetic systems are reviewed, focusing the attention on the peculiar phenomenology associated to nanoparticles with core/shell structure as compared to thin film bilayers. The main open questions posed by the experimental observations are presented and contrasted to existing theories and models for exchange bias formulated up to date. We also present results of simulations based on a simple model of a core/shell nanoparticle in which the values of microscopic parameters such as anisotropy and exchange constants can be tuned in the core, shell and at the interfacial regions, offering new insight on the microscopic origin of the experimental phenomenology. A detailed study of the magnetic order of the interfacial spins shows compelling evidence that most of the experimentally observed effects can be qualitatively accounted within the context of this model and allows also to quantify the magnitude of the loop shifts in striking agreement with the macroscopic observed values.

New aspects of nanopharmaceutical delivery systems.

Abstract: Nanobiotechnology, involving biological systems manufactured at the molecular level, is a multidisciplinary field that has fostered the development of nanoscaled pharmaceutical delivery devices. Micelles, liposomes, solid lipid nanoparticles, polymeric nanoparticles, functionalized nanoparticles, nanocrystals, cyclodextrins, dendrimers, nanotubes and metallic nanoparticles have been used as strategies to deliver conventional pharmaceuticals or substances such as peptides, recombinant proteins, vaccines and nucleotides. Nanoparticles and other colloidal pharmaceutical delivery systems modify many physicochemical properties, thus resulting in changes in the body distribution and other pharmacological processes. These changes can lead to pharmaceutical delivery at specific sites and reduce side effects. Therefore, nanoparticles can improve the therapeutic efficiency, being excellent carriers for biological molecules, including enzymes, recombinant proteins and nucleic acid. This review discusses different pharmaceutical carrier systems, and their potential and limitations in the field of pharmaceutical technology. Products with these technologies which have been approved by the FDA in different clinical phases and which are on the market will be also discussed.

Selective diameter control of single-walled carbon nanotubes in the gas-phase synthesis.

Abstract: A novel approach for selective diameter control of single-walled carbon nanotubes (SWNTs) is performed in the gas-phase growth using two kinds of carbon sources with different decomposition properties; the one carbon source (1st carbon source) is the organic solvent which is difficult to decompose in the reactor and the another carbon source (2nd carbon source) is facile to decompose. The diameter distributions of SWNTs synthesized with various conditions of the flow rate of the 2nd carbon source were investigated by resonant Raman scattering, optical absorption, and photoluminescence (PL) mapping measurements. It was found that increasing the flow rate of the ethylene tends to decrease the diameter of synthesized SWNTs, probably due to the earlier nucleation of SWNTs induced by the ethylene addition. The controlling the flow rate of the ethylene used as a 2nd carbon source can selectively tune the diameter distribution of SWNTs in our growth system.

Magnetic vortex state stability, reversal and dynamics in restricted geometries.

Abstract: Magnetic vortices are typically the ground states in geometrically confined ferromagnets with small magnetocrystalline anisotropy. In this article I review static and dynamic properties of the magnetic vortex state in small particles with nanoscale thickness and sub-micron and micron lateral sizes (magnetic dots). Magnetic dots made of soft magnetic material shaped as flat circular and elliptic cylinders are considered. Such mesoscopic dots undergo magnetization reversal through successive nucleation, displacement and annihilation of magnetic vortices. The reversal process depends on the stability of different possible zero-field magnetization configurations with respect to the dot geometrical parameters and application of an external magnetic field. The interdot magnetostatic interaction plays an important role in magnetization reversal for dot arrays with a small dot-to-dot distance, leading to decreases in the vortex nucleation and annihilation fields. Magnetic vortices reveal rich, non-trivial dynamical properties due to existance of the vortex core bearing topological charges. The vortex ground state magnetization distribution leads to a considerable modification of the nature of spin excitations in comparison to those in the uniformly magnetized state. A magnetic vortex confined in a magnetically soft ferromagnet with micron-sized lateral dimensions possesses a characteristic dynamic excitation known as a translational mode that corresponds to spiral-like precession of the vortex core around its equilibrium position. The translation motions of coupled vortices are considered. There are, above the vortex translation mode eigenfrequencies, several dynamic magnetization eigenmodes localized outside the vortex core whose frequencies are determined principally by dynamic demagnetizing fields appearing due to restricted dot geometry. The vortex excitation modes are classified as translation modes and radially or azimuthally symmetric spin waves over the vortex ground state. Studying the spin eigenmodes in such systems provides valuable information to relate the particle dynamical response to geometrical parameters. Unresolved problems are identified to attract attention of researchers working in the area of nanomagnetism.

Magnetic nanoparticles for drug delivery applications.

Abstract: In recent past magnetic nanoparticles have been explored for a number of biomedical applications due to their superparamagnetic moment with high magnetic saturation value. For these biomedical applications, magnetic nanoparticles require being monodispersed so that the individual nanoparticle has almost identical physico-chemical properties for biodistribution, bioelimination and contrast imaging potential. Further, the surface functionalization/modification of magnetic nanoparticles ultimately facilitate the protein or DNA separation, detection and magnetic resonance imaging contrast, drug delivery and hyperthermia applications. The essential goal of this review is to evaluate the recent advances of magnetic nanoparticles for tumor, brain targeting and hyperthermia applications.

Shape memory polymers and their nanocomposites: a review of science and technology of new multifunctional materials.

Abstract: In this study Co(Ni)/MoS2 unsupported nanocatalysts (nanorods and nanoribbons) were synthesized with Co(Ni)/(Co(Ni) + Mo) = 0.3, 0.5 molar ratios for Co and Ni respectively. First the alpha-MoO3 nanostructures were impregnated with an aqueous solution of Co(Ni)Cl2 x 6H2O or Co(Ni)(NO3)2 x 6H2O, then were treated for 2 h at 473 K, and finally the precursors were activated under a H2S/H2 mixture (15% v/v H2S) by ramping the temperature from room temperature to 773 K and keeping it at that value for 2 h. The resulting materials were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, specific surface area and X-ray photoelectron spectroscopy, and tested as catalysts for the hydrodesulfurization (HDS) of dibenzothiophene (DBT). It was found that these materials presented specific surface areas below 25 m2/g. The catalytic test showed that only when Co is added a promoter effect is observed compared with MoS2 unpromoted catalysts. Among the materials prepared, the Co/MoS2 catalyst made from cobalt chloride presented the highest catalytic activity (6.95 mol s(-1) g(-1)catalyst) for the HDS of DBT. The selectivity for the latter indicated a clear preference for the direct desulphurization over the hydrogenating pathway.

Biotemplated synthesis of metallic nanoparticle chains on an alpha-synuclein fiber scaffold.

Abstract: Biomolecular templates provide an excellent potential tool for bottom-up device fabrication. Self-assembling alpha-synuclein protein fibrils, the formation of which has been linked to Parkinson's disease, have yet to be explored for potential device fabrication. In this paper, alpha-synuclein fibrils were used as a template for palladium (Pd), gold (Au) and copper (Cu) nanoparticle chains synthesis. Deposition over a range of conditions resulted in metal-coated fibers with reproducible average diameters between 50 and 200 nm. Active elemental palladium deposited on the protein fibrils is used as a catalyst for the electroless deposition of Au and Cu. Nanoparticle chains were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray energy dispersive spectrometry (XEDS), and electron energy loss spectrometry (EELS).

Oxide nanobelts and nanowires--growth, properties and applications.

Abstract: Nanowires (NWs) and nanobelts (NBs) are diverse classes of one-dimensional nanoscale materials with controllable size, composition, structure and corresponding physical and chemical properties. This article reviews the novel growth phenomena, unique properties and exciting applications of oxide NWs and NBs. First, the article gives a general introduction about the vapor-liquid-solid (VLS) growth method. Second, the growth of oxide NBs using a vapor-solid (VS) process has been demonstrated. Third, using ZnO as an example, polar-surface dominated growth phenomena, such as the formation of single-crystal nanoring, nanospring and nanohelix, are comprehensively described. Then, novel techniques developed for characterizing the mechanical, electrical, thermal and optical properties of NWs and NBs are illustrated. Finally, some exciting applications in areas such as sensors, photon detectors and nanogenerators are presented. In concluding, the challenges and prospects for the future are discussed.

Nanoparticle fluorescence based technology for biological applications.

Abstract: Fluorescence is widely used in biological detection and imaging. The emerging luminescent nanoparticles or quantum dots provide a new type of biological agents that can improve these applications. The advantages of luminescent nanoparticles for biological applications include their high quantum yield, color availability, good photo-stability, large surface-to-volume ratio, surface functionality, and small size. In this review article, we first introduce quantum size confinement, photoluminescence and upconversion luminescence of nanoparticles, then describe the preparation and conjugation of water soluble nanoparticles and introduce the applications of luminescence nanoparticles for in vitro and in vivo imaging, fluorescence resonance energy based detection, and the applications of luminescence nanoparticles for photodynamic activation.

Nanorods and nanotubes for solar cells.

Abstract: Nanorods and nanotubes as photoactive materials as well as electrodes in photovoltaic cells have been launched a few years ago, and the literature in this field started to appear only recently. The first steps have shown both advantages and disadvantages of their application, and the main expectation associated with their effective charge transport has not been realized completely. This article aims to review both the first and the recent tendencies in the development and application of nanorod and nanotube materials in photovoltaic cells. Two basic techniques of synthesis of crystalline nanorod structures are described, the top-down and bottom-up approaches, respectively. Design and photovoltaic performance of solar cells based on various semiconductor nanorod materials, such as TiO2, ZnO, CdS, CdSe, CdTe, CuO, Si are presented and compared with respective solar cells based on semiconductor nanoparticles. Specific of synthesis and application of carbon nanotubes in photovoltaic devices is also reviewed.

Nanofluid Two-Phase Flow and Thermal Physics: A New Research Frontier of Nanotechnology and Its Challenges

Abstract: Nanofluids are a new class of fluids engineered by dispersing nanometer-size solid particles in base fluids. As a new research frontier, nanofluid two-phase flow and thermal physics have the potential to improve heat transfer and energy efficiency in thermal management systems for many applications, such as microelectronics, power electronics, transportation, nuclear engineering, heat pipes, refrigeration, air-conditioning and heat pump systems. So far, the study of nanofluid two-phase flow and thermal physics is still in its infancy. This field of research provides many opportunities to study new frontiers but also poses great challenges. To summarize the current status of research in this newly developing interdisciplinary field and to identify the future research needs as well, this paper focuses on presenting a comprehensive review of nucleate pool boiling, flow boiling, critical heat flux, condensation and two-phase flow of nanofluids. Even for the limited studies done so far, there are some controversies. Conclusions and contradictions on the available nanofluid studies on physical properties, two-phase flow, heat transfer and critical heat flux (CHF) are presented. Based on a comprehensive analysis, it has been realized that the physical properties of nanofluids such as surface tension, liquid thermal conductivity, viscosity and density have significant effects on the nanofluid two-phase flow and heat transfer characteristics but the lack of the accurate knowledge of these physical properties has greatly limited the study in this interdisciplinary field. Therefore, effort should be made to contribute to the physical property database of nanofluids as a first priority. Secondly, in particular, research on nanofluid two-phase flow and heat transfer in microchannels should be emphasized in the future.

Antimicrobial activity of organically modified nano-clays.

Abstract: Antimicrobial activity of three kinds of commercially available montmorillonite nano-clays including a naturally occurring one (Cloisite Na+) and two organically modified ones (Cloisite 20A and Cloisite 30B) against four representative pathogenic bacteria (two Gram-positive ones such as Staphylococcus aureus and Listeria monocytogenes, and two Gram-negative ones such as Salmonella typhimurium and E. coli O157:H7) was investigated. Antimicrobial activity was found to be dependent on the type of nano-clay and microorganisms tested. Among the nano-clays tested, Cloisite 30B showed the highest antibacterial activity followed by Cloisite 20A, however, the unmodified montmorillonite (Cloisite Na+) did not show any antibacterial activity. Especially, Cloisite 30B inactivated Gram-positive bacteria completely within an hour of incubation and inactivated Gram-negative bacteria by more than 2-3 log cycles after 8 hours incubation. SEM and TEM images of cell structure indicated that the organically modified nano-clay caused rupture of cell membrane and inactivation of the bacteria. This finding of antimicrobial activity of the organo-clay would open a new opportunity to develop polymer nanocomposites with additional functionality, i.e., antimicrobial function.

Bacterial synthesis of copper/copper oxide nanoparticles

Abstract: A bacterial mediated synthesis of copper/copper oxide nanoparticle composite is reported. A Gram-negative bacterium belonging to the genus Serratia was isolated from the midgut of Stibara sp., an insect of the Cerambycidae family of beetles found in the Northwestern Ghats of India. This is a unique bacterium that is quite specific for the synthesis of copper oxide nanoparticles as several other strains isolated from the same insect and common Indian mosquitoes did not result in nanoparticle formation. By following the reaction systematically, we could delineate that the nanoparticle formation occurs intracellularly. However, the process results in the killing of bacterial cells. Subsequently the nanoparticles leak out as the cell wall disintegrates. The nanoparticles formed are thoroughly characterized by UV-Vis, TEM, XRD, XPS and FTIR studies.

Polymerically modified layered silicates: an effective route to nanocomposites.

Abstract: Polymer/clay nanocomposites have been under an extensive investigation for about 15 years. Traditional methods to modify the clay are usually limited to small organic cations, preferably containing long alkyl chain(s), which are exchanged with the inorganic cations in the clay gallery. This article provides a comprehensive review on the strategies for clay modification using polymeric surfactants or polycations: from the synthesis of such surfactants, through the preparation of the polymerically modified clays, and to the fabrication of the respective polymer nanocomposites and their properties.

Cadmium sulphide (CdS) nanotechnology: synthesis and applications.

Abstract: Over the past few years there has been sustained interest in the synthesis, characterization and application of cadmium sulphide (CdS) nanostructures such as nanoparticles, nanowires, nanobelts, nanospheres. The history of CdS, more recent advances in the chemistry and synthesis of CdS nanostructures, and their application as nanoscale devices in diverse technology areas from electronics to targeted drug delivery is described. Although the focus is on CdS, the review provides an excellent overview of the materials, methods, processes and promising solutions that are emerging.

Self-assembly and graft polymerization route to Monodispersed Fe3O4@SiO2--polyaniline core-shell composite nanoparticles: physical properties.

Abstract: This study describes the synthesis of monodispersed core-shell composites of silica-modified magnetic nanoparticles and conducting polyaniline by self-assembly and graft polymerization. Magnetic ferrite nanoparticles (Fe3O4) were prepared by coprecipitation of Fe+2 and Fe+3 ions in alkaline solution, and then silananized. The silanation of magnetic particles (Fe3O4@SiO2) was carried out using 3-bromopropyltrichlorosilane (BPTS) as the coupling agent. FT-IR spectra indicated the presence of Fe--O--Si chemical bonds in Fe3O4@SiO2. Core-shell type nanocomposites (Fe3O4@SiO2/PANI) were prepared by grafting polyaniline (PANI) on the surface of silanized magnetic particles through surface initiated in-situ chemical oxidative graft polymerization. The nanocomposites were characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform infrared (FTIR) spectra, UV-visible spectroscopy, photoluminescence (PL) spectra, electrical conductivity and magnetic characteristics. HRTEM images of the nanocomposites revealed that the silica-modified magnetic particles made up the core while PANI made up the shell. The XPS spectrum revealed the presence of silica in the composites, and the XRD results showed that the composites were more crystalline than pure PANI. PL spectra show that composites exhibit photoluminescent property. Conductivity of the composites (6.2 to 9.4 x 10(-2) S/cm) was higher than that of pristine PANI (3.7 x 10(-3) S/cm). The nanocomposites exhibited superparamagnetism. Formation mechanism of the core-shell structured nanocomposites and the effect of modified magnetic nanoparticles on the electro-magnetic properties of the Fe3O4@SiO2/PANI nanocomposites are also investigated. This method provides a new strategy for the generation of multi-functional nanocomposites that composed of other conducting polymers and metal nanoparticles.

Preparation of Boron Nitride Nanotubes Aqueous Dispersions for Biological Applications

Abstract: While in the last years applications of carbon nanotubes in the field of biotechnology have been largely proposed, biomedical applications of boron nitride nanotubes (BNNTs) are yet totally unexplored. BNNTs have very interesting physical properties that should be exploited in the biomedical field. At this date, studies on their biocompatibility are completely missing and the first issue behind this investigation is the dispersion of BNNTs in aqueous solutions. In this paper the authors propose, for the first time, a technique for obtaining BNNT stable dispersions suitable for biological applications, based on polyethyleneimine (PEI) water solutions. Based on authors' knowledge, in vitro testing performed on human neuroblastoma cell line (SH-SY5Y) is the first study of interaction between BNNTs and living material. Experimental results showed a satisfactory cell viability up to a concentration of 5.0 microg/ml PEI-BNNTs in the cell culture medium.

Conducting polymer/clay nanocomposites and their applications.

Abstract: This review aims at reporting on interesting and potential aspects of conducting polymer/clay nanocomposites with regard to their preparation, characteristics and engineering applications. Various conducting polymers such as polyaniline, polypyrrole and copolyaniline are introduced and three different preparation methods of synthesizing conducting polymer/clay nanocomposites are being emphasized. Morphological features, structure characteristics and thermal degradation behavior are explained based on SEM/TEM images, XRD pattern analyses and TGA/DSC graphs, respectively. Attentions are also being paid on conductive/magnetic performances as well as two potential applications in anti-corrosion coating and electrorheological (ER) fluids.

ZnO nanonails: synthesis and their application as glucose biosensor.

Abstract: Well-crystallized zinc oxide nanonails were grown in a high density by thermal evaporation process and were used as supporting matrixes for glucose oxidase (GOx) immobilization to construct efficient glucose biosensor. The GOx attached to the surfaces of ZnO nanonails had more spatial freedom in its orientation, which facilitated the direct electron transfer between the active sites of immobilized GOx and electrode surface. The fabricated biosensor showed a high sensitivity of 24.613 microA cm(-2) mM(-1) with a response time less than 10 s. Moreover, it shows a linear range from 0.1 to 7.1 mM with a correlation coefficient of R = 0.9937 and detection limit of 5 microM.

The role of sulphur in the synthesis of carbon nanotubes by chemical vapour deposition at high temperatures

Abstract: Sulphur has been recognised as a growth promoter for carbon fibres and carbon nanotubes for over 30 years. Moreover, the Fe-C-S system, in particular, has been extensively studied for more than half a century in the fields of steelmaking and cast iron. In the present work we examine the role of sulphur in the iron-catalysed growth of carbon nanotubes during the process of direct spinning of fibres from the gas phase. A detailed microstructural characterisation of the reaction products was conducted by high resolution TEM and EELS composition mapping on a dedicated FEG STEM (VG HB 501) equipped with Cs aberration correctors. Our results agree with previous works in classical metallurgy, indicating that sulphur forms a layer on the surface of the catalyst particles that plays a role in encouraging nanotube growth by surface diffusion.

Effect of micro/nano silica particle feeding for mice.

Abstract: The toxic effect of nano and micron sized silica particle was studied on mice. The size of the nano and micron sized silica were approximately 30 nm and approximately 30 microm, respectively. The mice, Balb/c (20 approximately 30 g, white) and C57BL/6J (black) for the experiment were classified to normal, nano sized silica (1%), and micron sized silica (1%) dieted groups. After feeding for 10 weeks, the blood was tested biochemically and hematologically. There was no difference between the groups in the tested items except ALT (Alanine Aminotransferase). The nano sized silica particle dieted group showed higher value of ALT than normal and micron sized silica dieted groups. H&E staining of the liver of the nano sized particle dieted group indicated some fatty liver pattern while the contents of Si in the livers of the groups were almost the same. From the results, it was suggested that the nano sized silica particle had a toxic effect on the liver even though there was no significant different on the health in total fed amount of 140 g silica/kg mouse.

Application of the Hansen solubility Parameters theory to carbon nanotubes.

Abstract: Carbon nanotubes (CNT) are very promising nano-objects due to their exceptional properties. However, their tendency to form bundles as well as their insolubility in common solvents makes them difficult to handle. The main way to solve the problem is chemical or physical CNTs functionalisations, with all the problems inherent to the methods. In this contribution, we present a new approach that allows predicting the solubility of carbon nanotubes in many solvents but also predicting the most appropriate solvents to use for given samples of CNTs. Solubilisation and dispersion being directly connected, the present approach of solubilisation proves also to be efficient in dispersing the CNTs bundles. This contribution is a first step toward the control of carbon nanotube's dispersion in polymers and their homogenous functionalisation. Moreover, we also report here a new method, based on solvents, to separate carbon nanotubes by size, the use of mixture of non-solvents in order to obtain good solvents and the use of mixture of good solvents to obtain higher solubility. The use of mixture of good solvents allowed us to obtain high solubility, up to three times higher then that reported in literature. We have also measured and analysed the solubility of some functionalised carbon nanotubes.

Fast microwave-assisted purification, functionalization and dispersion of multi-walled carbon nanotubes.

Abstract: Microwave-assisted purification, chemical functionalization and dispersion of multi-walled carbon nanotubes (MWNTs) are reported. To prevent sidewall functionalization, removal of residual catalyst was carried out using weak, dilute acids and complexing agents. Further covalent derivatization by attaching hydrophilic groups to the sidewall improved aqueous dispersibility to reach 1 mg/mL in deionized water and 0.5 mg/mL in ethanol. Oxidized MWNTs containing -COOH could be used for further functionalization, such as, amidation. The MWNTs were found to be less reactive and had lower solubility than the single-walled carbon nanotubes (SWNTs). Electron microscopy, Fourier Transform Infrared Spectroscopy, Thermogravimetric Analyses and Atomic Absorption spectrometry studies were used to characterize the aimed-MWNTs.

Stiffness and thickness of boron-nitride nanotubes

Abstract: We establish an analytic approach to determine the tensile and bending stiffness of a hexagonal boron-nitride (h-BN) monolayer and single- and multi-wall boron-nitride nanotubes (BNNTs) directly from the interatomic potential. Such an approach enables one to bypass atomistic simulations and to give the tensile and bending stiffness in terms of the parameters in the potential. For single- and multi-wall BNNTs, the stiffness also depends on the (inner most or outer most) wall radius and the number of the walls. The thickness of h-BN monolayer is also discussed.

Recent developments in tip-based nanofabrication and its roadmap.

Abstract: Recent developments of tip-based nanofabrication (TBN) are reviewed. In TBN, a functionalized cantilevered-tip is the common basic apparatus for performing the tasks of nanofabrication. The nanofabrication applications of three major techniques under the TBN family: atomic force microscopy (AFM), dip-pen nanolithography (DPN), and scanning near-field optical microscopy (SNOM), are studied with the focus on their manipulability over the size, orientation, and position of the nanostructures fabricated. The nanostructures made by these techniques are selectively presented in order to illustrate the versatility and advancement of these tip-based techniques. The information reviewed and illustrated is extrapolated to form the basis for the assessment of the needs and challenges facing the TBN community in the future. A preliminary roadmap over the next seven years is then developed. The prospective approaches and focusing areas for future research and development are also discussed.

Scratch and wear resistance of polyamide 6 reinforced with multiwall carbon nanotubes.

Abstract: While carbon nanotubes have been used for a variety of purposes, it was not known whether they can improve tribological properties of polymers. Polyamide 6 (PA6) has been reinforced with 0.2, 0.5 and 1.0 wt% of multiwall carbon nanotubes (MWCNTs) by melt mixing process and characterized by scanning electron microscopy (SEM), transmission electron microscopy, thermogravimetric analysis (TGA), scratching, sliding wear and tensile testing. TGA results for the air atmosphere show that MWCNTs shift the onset of thermal degradation to higher temperatures. Sliding wear tests show that the penetration depth decreases as the concentration of carbon nanotubes increases. However, the viscoelastic healing is hampered by the MWCNTs presence and the residual depths increase at the same time. Narrower scratch groove widths are seen in SEM for composites with MWCNTs, and scratch hardness increases. Tensile tests show an increase of 27% in the Young modulus value upon addition of 1.0% of MWCNTs. The stress at yield is also higher for the nanocomposites.

Functionalizing nanowires with catalytic nanoparticles for gas sensing application.

Abstract: Metal oxide semiconducting nanowires are among the most promising materials systems for use as conductometric gas sensors. These systems function by converting surface chemical processes, often catalytic processes, into observable conductance variations in the nanowire. The surface properties, and hence the sensing properties of these devices can be altered dramatically improving the sensitivity and selectivity, by the deposition of catalytic metal nanoparticles on the nanowire's surface. This leads not only to promising sensor strategies but to a route for understanding some of the fundamental science occurring on these nanoparticles and at the metal/nanowire junction. In particular studying these systems can lead to a better understanding of the influence of the catalyst particle on the electronic structure of the nanowire and its electron transport. This report surveys results obtained so far in this area. In particular, the comparative sensing performance of single quasi-1D chemiresistors (i.e., nanowires or nanobelts) before and after surface decoration with noble metal catalyst particles show significant improvement in sensitivity toward oxidizing and reducing gases. Moreover, one finds that the sensing mechanism can depend dramatically on the degree of metal coverage of the nanowire.

The use of ultrasound and micelles in cancer treatment.

Abstract: The high toxicity of potent chemotherapeutic drugs like Doxorubicin (Dox) limits the therapeutic window in which they can be applied. This window can be expanded by controlling the drug delivery in both space and time such that non-targeted tissues are not adversely affected. Recent research has shown that ultrasound (US) can be used to control the release of Dox and other hydrophobic drugs from polymeric micelles in both time and space. It has also been shown using an in vivo rat tumor model that Dox activity can be enhanced by ultrasound in one region, while in an adjacent region there is little or no effect of the drug. In this article, we review the in vivo and in vitro research being conducted in the area of micellar drug delivery and ultrasound to cancerous tissues. Additionally, we summarize our previously published mathematical models that attempt to represent the release and re-encapsulation phenomena of Dox from Pluronic® P105 micelles upon the application of ultrasound. The potential benefits of such controlled chemotherapy compels a thorough investigation of role of ultrasound (US) and the mechanisms by which US accomplishes drug release and/or enhances drug potency. Therefore we will summarize our findings related the mechanism involved in acoustically activated micellar drug delivery to tumors.