scispace - formally typeset
Search or ask a question

Showing papers in "Journal of the American Chemical Society in 2006"


Journal ArticleDOI
TL;DR: It is found that, after exposure to continuous red laser at 800 nm, malignant cells require about half the laser energy to be photothermally destroyed than the nonmalignant cells, so both efficient cancer cell diagnostics and selective photothermal therapy are realized at the same time.
Abstract: Due to strong electric fields at the surface, the absorption and scattering of electromagnetic radiation by noble metal nanoparticles are strongly enhanced. These unique properties provide the potential of designing novel optically active reagents for simultaneous molecular imaging and photothermal cancer therapy. It is desirable to use agents that are active in the near-infrared (NIR) region of the radiation spectrum to minimize the light extinction by intrinsic chromophores in native tissue. Gold nanorods with suitable aspect ratios (length divided by width) can absorb and scatter strongly in the NIR region (650−900 nm). In the present work, we provide an in vitro demonstration of gold nanorods as novel contrast agents for both molecular imaging and photothermal cancer therapy. Nanorods are synthesized and conjugated to anti-epidermal growth factor receptor (anti-EGFR) monoclonal antibodies and incubated in cell cultures with a nonmalignant epithelial cell line (HaCat) and two malignant oral epithelial ...

5,047 citations


Journal ArticleDOI
TL;DR: It is reported that nanoscale carbon particles (carbon dots) upon simple surface passivation are strongly photoluminescent in both solution and the solid state.
Abstract: We report that nanoscale carbon particles (carbon dots) upon simple surface passivation are strongly photoluminescent in both solution and the solid state. The luminescence emission of the carbon dots is stable against photobleaching, and there is no blinking effect. These strongly emissive carbon dots may find applications similar to or beyond those of their widely pursued silicon counterparts.

3,817 citations


PatentDOI
TL;DR: A carbon dioxide storage system includes a container and a conduit attached to the container for introducing or removing a carbon dioxide-containing composition from the container as mentioned in this paper, which is positioned within the container.
Abstract: A carbon dioxide storage system includes a container and a conduit attached to the container for introducing or removing a carbon dioxide-containing composition from the container. A carbon dioxide storage material is positioned within the container. The carbon dioxide-storage material includes a metal-organic framework, which has a sufficient surface area to store at least 10 carbon dioxide molecules per formula unit of the metal-organic framework at a temperature of about 25° C.

2,320 citations


Journal ArticleDOI
TL;DR: By using bifunctional surface modifiers (SH-R-COOH), CdSe quantum dots (QDs) have been assembled onto mesoscopic TiO(2) films and exhibits a photon-to-charge carrier generation efficiency of 12%.
Abstract: By using bifunctional surface modifiers (SH−R−COOH), CdSe quantum dots (QDs) have been assembled onto mesoscopic TiO2 films. Upon visible light excitation, CdSe QDs inject electrons into TiO2 nanocrystallites. Femtosecond transient absorption as well as emission quenching experiments confirm the injection from the excited state of CdSe QDs into TiO2 nanoparticles. Electron transfer from the thermally relaxed s-state occurs over a wide range of rate constant values between 7.3 × 109 and 1.95 × 1011 s-1. The injected charge carriers in a CdSe-modified TiO2 film can be collected at a conducting electrode to generate a photocurrent. The TiO2−CdSe composite, when employed as a photoanode in a photoelectrochemical cell, exhibits a photon-to-charge carrier generation efficiency of 12%. Significant loss of electrons occurs due to scattering as well as charge recombination at TiO2/CdSe interfaces and internal TiO2 grain boundaries.

1,738 citations


Journal ArticleDOI
TL;DR: The results suggest that under low-loading conditions, the H(2) adsorption behavior of MOFs can be improved by imparting larger charge gradients on the metal oxide units and adjusting the link metrics to constrict the pore dimensions; however, a large pore volume is still a prerequisite feature.
Abstract: The dihydrogen adsorption isotherms of eight metal-organic frameworks (MOFs), measured at 77 K up to a pressure of 1 atm, have been examined for correlations with their structural features. All materials display approximately Type I isotherms with no hysteresis, and saturation was not reached for any of the materials under these conditions. Among the six isoreticular MOFs (IRMOFs) studied, the catenated materials exhibit the largest capacities on a molar basis, up to 9.8 H(2) per formula unit. The addition of functional groups (-Br, -NH(2), -C(2)H(4)-) to the phenylene links of IRMOF-1 (MOF-5), or their replacement with thieno[3,2-b]thiophene moieties in IRMOF-20, altered the adsorption behavior by a minor amount despite large variations in the pore volumes of the resulting materials. In contrast, replacement of the metal oxide units with those containing coordinatively unsaturated metal sites resulted in greater H(2) uptake. The enhanced affinities of these materials, MOF-74 and HKUST-1, were further demonstrated by calculation of the isosteric heats of adsorption, which were larger across much of the range of coverage examined, compared to those of representative IRMOFs. The results suggest that under low-loading conditions, the H(2) adsorption behavior of MOFs can be improved by imparting larger charge gradients on the metal oxide units and adjusting the link metrics to constrict the pore dimensions; however, a large pore volume is still a prerequisite feature.

1,670 citations


Journal ArticleDOI
TL;DR: In this article, thin films of silicon-doped Fe2O3 were deposited by APCVD (atmospheric pressure chemical vapor deposition) from Fe(CO)5 and TEOS (tetraethoxysilane) on SnO2-coated glass at 415 °C.
Abstract: Thin films of silicon-doped Fe2O3 were deposited by APCVD (atmospheric pressure chemical vapor deposition) from Fe(CO)5 and TEOS (tetraethoxysilane) on SnO2-coated glass at 415 °C. HRSEM reveals a highly developed dendritic nanostructure of 500 nm thickness having a feature size of only 10−20 nm at the surface. Real surface area determination by dye adsorption yields a roughness factor of 21. XRD shows the films to be pure hematite with strong preferential orientation of the [110] axis vertical to the substrate, induced by silicon doping. Under illumination in 1 M NaOH, water is oxidized at the Fe2O3 electrode with higher efficiency (IPCE = 42% at 370 nm and 2.2 mA/cm2 in AM 1.5 G sunlight of 1000 W/m2 at 1.23 VRHE) than at the best reported single crystalline Fe2O3 electrodes. This unprecedented efficiency is in part attributed to the dendritic nanostructure which minimizes the distance photogenerated holes have to diffuse to reach the Fe2O3/electrolyte interface while still allowing efficient light abso...

1,442 citations


Journal ArticleDOI
TL;DR: Magnetic and electrical resistivity measurements verify the occurrence of the superconducting transition at approximately 4 K in an iron-based layered oxy-pnictide LaOFeP.
Abstract: We report superconductivity in an iron-based layered oxy-pnictide LaOFeP. LaOFeP is composed of an alternate stack of lanthanum oxide (La3+O2-) and iron pnictide (Fe2+P3-) layers. Magnetic and electrical resistivity measurements verify the occurrence of the superconducting transition at ∼4 K.

1,399 citations


Journal ArticleDOI
TL;DR: It is demonstrated directly, by in situ differential electrochemical mass spectrometry (DEMS), that O2 is evolved from such Mn4+ -containing compounds, Li-Mn-Ni-O compounds, which can, after O loss, store 200 mAhg(-1) of charge compared with 140mAhg (-1) for LiCoO(2).
Abstract: The cathode in rechargeable lithium-ion batteries operates by conventional intercalation; Li+ is extracted from LiCoO2 on charging accompanied by oxidation of Co3+ to Co4+; the process is reversed on discharge. In contrast, Li+ may be extracted from Mn4+-based solids, e.g., Li2MnO3, without oxidation of Mn4+. A mechanism involving simultaneous Li and O removal is often proposed. Here, we demonstrate directly, by in situ differential electrochemical mass spectrometry (DEMS), that O2 is evolved from such Mn4+-containing compounds, Li[Ni0.2Li0.2Mn0.6]O2, on charging and using powder neutron diffraction show that O loss from the surface is accompanied by diffusion of transition metal ions from surface to bulk where they occupy vacancies created by Li removal. The composition of the compound moves toward MO2. Understanding such unconventional Li extraction is important because Li−Mn−Ni−O compounds, irrespective of whether they contain Co, can, after O loss, store 200 mAhg-1 of charge compared with 140 mAhg-1 f...

1,387 citations


Journal ArticleDOI
TL;DR: Photoluminescent measurements indicate that the value of I610/I590 and the overall emission intensity of the NaEuF4 nanocrystals are highly correlative with the symmetries of the Eu3+ ions in both the lattice and the surface.
Abstract: We report a general synthesis of high-quality cubic (α-phase) and hexagonal (β-phase) NaREF4 (RE: Pr to Lu, Y) nanocrystals (nanopolyhedra, nanorods, nanoplates, and nanospheres) and NaYF4:Yb,Er/Tm nanocrystals (nanopolyhedra and nanoplates) via the co-thermolysis of Na(CF3COO) and RE(CF3COO)3 in oleic acid/oleylamine/1-octadecene. By tuning the ratio of Na/RE, solvent composition, reaction temperature and time, we can manipulate phase, shape, and size of the nanocrystals. On the basis of its α → β phase transition behavior, along the rare-earth series, NaREF4 can be divided into three groups (I: Pr and Nd; II: Sm to Tb; III: Dy to Lu, Y). The whole controlled-synthesis mechanism can be explained from the point of view of free energy. Photoluminescent measurements indicate that the value of I610/I590 and the overall emission intensity of the NaEuF4 nanocrystals are highly correlative with the symmetries of the Eu3+ ions in both the lattice and the surface.

1,338 citations


Journal ArticleDOI
TL;DR: X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports.
Abstract: The influence of cobalt particle size in the range of 2.6-27 nm on the performance in Fischer-Tropsch synthesis has been investigated for the first time using well-defined catalysts based on an inert carbon nanofibers support material. X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports. The turnover frequency (TOF) for CO hydrogenation was independent of cobalt particle size for catalysts with sizes larger than 6 nm (1 bar) or 8 nm (35 bar), while both the selectivity and the activity changed for catalysts with smaller particles. At 35 bar, the TOF decreased from 23 x 10(-3) to 1.4 x 10(-3) s(-1), while the C5+ selectivity decreased from 85 to 51 wt % when the cobalt particle size was reduced from 16 to 2.6 nm. This demonstrates that the minimal required cobalt particle size for Fischer-Tropsch catalysis is larger (6-8 nm) than can be explained by classical structure sensitivity. Other explanations raised in the literature, such as formation of CoO or Co carbide species on small particles during catalytic testing, were not substantiated by experimental evidence from X-ray absorption spectroscopy. Interestingly, we found with EXAFS a decrease of the cobalt coordination number under reaction conditions, which points to reconstruction of the cobalt particles. It is argued that the cobalt particle size effects can be attributed to nonclassical structure sensitivity in combination with CO-induced surface reconstruction. The profound influences of particle size may be important for the design of new Fischer-Tropsch catalysts.

1,326 citations


Journal ArticleDOI
TL;DR: Covalent derivatization of the acidic functional groups in oxidized graphite with octadecylamine renders graphite soluble in common organic solvents, and the first solution properties of graphite are reported.
Abstract: Covalent derivatization of the acidic functional groups in oxidized graphite with octadecylamine renders graphite soluble in common organic solvents. Atomic force microscopic characterization of the soluble species supports the idea that the solutions consist of single and few layer graphene sheets, and we report the first solution properties of graphite.

Journal ArticleDOI
TL;DR: These newly discovered reaction conditions are also applicable for cyanation, amination, etherification, and thioetherification of aryl C-H bonds.
Abstract: Cu(II)-catalyzed acetoxylation and halogenation of aryl C−H bonds are developed. ortho-Selectivity was observed with a wide range of 2-arylpyridine substrates. Both mono- and difunctionalizations are achieved by tuning the reaction conditions. Excellent functional group tolerance and use of O2 as a stoichiometric oxidant are significant advantages over our recently developed Pd-catalyzed C−H functionalization reactions. These newly discovered reaction conditions are also applicable for cyanation, amination, etherification, and thioetherification of aryl C−H bonds. Mechanistic investigations are carried out to gain insights into the Cu(II)-catalyzed C−H functionalization reactions.

Journal ArticleDOI
TL;DR: Results demonstrate that maximum H2 storage capacity in MOFs correlates well to surface area, and that feasible volumetric uptakes can be realized even in highly porous materials.
Abstract: Saturation H2 uptake in a series of microporous metal−organic frameworks (MOFs) has been measured at 77 K. Saturation pressures vary between 25 and 80 bar across the series, with MOF-177 showing the highest uptake on a gravimetric basis (7.5 wt %) and IRMOF-20 showing the highest uptake on a volumetric basis at 34 g/L. These results demonstrate that maximum H2 storage capacity in MOFs correlates well to surface area, and that feasible volumetric uptakes can be realized even in highly porous materials.

Journal ArticleDOI
TL;DR: This paper describes a systematic study on the synthesis, anion exchange, and delamination of Co-Al layered double hydroxide (LDH), with the aim of achieving fabrication and clarifying the properties of LDH nanosheet/polyanion composite films.
Abstract: This paper describes a systematic study on the synthesis, anion exchange, and delamination of Co-Al layered double hydroxide (LDH), with the aim of achieving fabrication and clarifying the properties of LDH nanosheet/polyanion composite films. Co-Al-CO3 LDH hexagonal platelets of 4 mum in lateral size were synthesized by the urea method under optimized reaction conditions. The as-prepared CO3(2-)-LDH was converted to Cl- -LDH by treating with a NaCl-HCl mixed solution, retaining its high crystallinity and hexagonal platelike morphology. LDHs intercalated with a variety of anions (such as NO3-, ClO4-, acetate, lactate, dodecyl sulfate, and oleate) were further prepared from Cl- -LDH via an anion-exchange process employing corresponding salts. Exchanged products in various anion forms were found to show different delamination behaviors in formamide. Among them, best results were observed for NO3- -LDH in terms of the exfoliating degree and the quality of the exfoliated nanosheets. The delamination gave a pink transparent suspension containing well-defined nanosheets with lateral sizes of up to 2 microm. The resulting nanosheets were assembled layer-by-layer with an anionic polymer, poly(sodium styrene 4-sulfonate) (PSS), onto quartz glass substrates to produce composite films. Magnetic circular dichroism (MCD) measurements revealed that the assembled multilayer films exhibited an interesting magneto-optical response.

Journal ArticleDOI
TL;DR: P(MEO2MA-co-OEGMA) copolymers can be considered as ideal structures, which combine both the properties of poly(ethylene glycol) and PNIPAM in a single macromolecule.
Abstract: The present Communication compares the thermosensitivity in dilute aqueous solutions of well-defined copolymers composed of 95% of 2-(2-methoxyethoxy)ethyl methacrylate (MEO2MA) and 5% of oligo(ethylene glycol) methacrylate (OEGMA, Mn = 475 g·mol-1) and poly(N-isopropylacrylamide) (PNIPAM) samples having similar degrees of polymerization and chain-ends. The thermoresponsive behavior of P(MEO2MA-co-OEGMA) was found to be overall comparable, and in some cases, superior to PNIPAM. Hence, P(MEO2MA-co-OEGMA) copolymers can be considered as ideal structures, which combine both the properties of poly(ethylene glycol) and PNIPAM in a single macromolecule.

Journal ArticleDOI
TL;DR: In this paper, the authors demonstrate two essential prerequisites for the successful operation of a rechargeable Li/O2 battery; that the Li2O2 formed on discharging such an O2 electrode is decomposed to Li and O2 on charging (shown here by in situ mass spectrometry), with or without a catalyst, and that charge/discharge cycling is sustainable for many cycles.
Abstract: Rechargeable lithium batteries represent one of the most important developments in energy storage for 100 years, with the potential to address the key problem of global warming. However, their ability to store energy is limited by the quantity of lithium that may be removed from and reinserted into the positive intercalation electrode, LixCoO2, 0.5

Journal ArticleDOI
TL;DR: It is reported that polarsolvents such as H(2)O, alcohols, dipolar aprotic solvents, ethylene and propylene carbonate, and ionic liquids instantaneously disproportionate Cu(I)X into Cu(0) and Cu(II)X(2), facilitating an ultrafast LRP in which the free radicals are generated by the nascent and extremely reactive Cu( 0) atomic species.
Abstract: Conventional metal-catalyzed organic radical reactions and living radical polymerizations (LRP) performed in nonpolar solvents, including atom-transfer radical polymerization (ATRP), proceed by an inner-sphere electron-transfer mechanism. One catalytic system frequently used in these polymerizations is based on Cu(I)X species and N-containing ligands. Here, it is reported that polar solvents such as H(2)O, alcohols, dipolar aprotic solvents, ethylene and propylene carbonate, and ionic liquids instantaneously disproportionate Cu(I)X into Cu(0) and Cu(II)X(2) species in the presence of a diversity of N-containing ligands. This disproportionation facilitates an ultrafast LRP in which the free radicals are generated by the nascent and extremely reactive Cu(0) atomic species, while their deactivation is mediated by the nascent Cu(II)X(2) species. Both steps proceed by a low activation energy outer-sphere single-electron-transfer (SET) mechanism. The resulting SET-LRP process is activated by a catalytic amount of the electron-donor Cu(0), Cu(2)Se, Cu(2)Te, Cu(2)S, or Cu(2)O species, not by Cu(I)X. This process provides, at room temperature and below, an ultrafast synthesis of ultrahigh molecular weight polymers from functional monomers containing electron-withdrawing groups such as acrylates, methacrylates, and vinyl chloride, initiated with alkyl halides, sulfonyl halides, and N-halides.

Journal ArticleDOI
TL;DR: Use of the tritopic bridging ligand 1,3,5-benzenetristetrazolate (BTT3-) enables formation ofDMF, featuring a porous metal-organic framework with a previously unknown cubic topology.
Abstract: Use of the tritopic bridging ligand 1,3,5-benzenetristetrazolate (BTT3-) enables formation of [Mn(DMF)6]3[(Mn4Cl)3(BTT)8(H2O)12]2·42DMF·11H2O·20CH3OH, featuring a porous metal−organic framework with a previously unknown cubic topology. Crystals of the compound remain intact upon desolvation and show a total H2 uptake of 6.9 wt % at 77 K and 90 bar, which at 60 g H2/L provides a storage density 85% of that of liquid hydrogen. The material exhibits a maximum isosteric heat of adsorption of 10.1 kJ/mol, the highest yet observed for a metal−organic framework. Neutron powder diffraction data demonstrate that this is directly related to H2 binding at coordinatively unsaturated Mn2+ centers within the framework.

Journal ArticleDOI
TL;DR: The very specific binding of the HgII ion unexpectedly and significantly stabilizes naturally occurring thymine-thymine base mispairing in DNA duplexes and prepared DNA dupLexes containing metal-mediated base pairs at the desired sites, as well as novel double helical architectures consisting only of thymine/HgII/thymine pairs.
Abstract: The very specific binding of the HgII ion unexpectedly and significantly stabilizes naturally occurring thymine−thymine base mispairing in DNA duplexes. Following this finding, we prepared DNA dupl...

Journal ArticleDOI
TL;DR: Upconverting lanthanide-doped nanocrystals were synthesized via the thermal decomposition of trifluoroacetate precursors in a mixture of oleic acid and octadecene to provide highly luminescent nanoparticles through a simple one-pot technique with only one preparatory step.
Abstract: Upconverting lanthanide-doped nanocrystals were synthesized via the thermal decomposition of trifluoroacetate precursors in a mixture of oleic acid and octadecene. This method provides highly luminescent nanoparticles through a simple one-pot technique with only one preparatory step. The Er3+, Yb3+ and Tm3+, Yb3+ doped cubic NaYF4 nanocrystals are colloidally stable in nonpolar organic solvents and exhibit green/red and blue upconversion luminescence, respectively, under 977 nm laser excitation with low power densities.

Journal ArticleDOI
TL;DR: These three different near-surface compositions (Pt-skin, Pt-skeleton, and pure polycrystalline Pt) all having pure-Pt outermost layers are found to have different electronic structures, which originates from different arrangements of subsurface atoms of the alloying component.
Abstract: The surface properties of PtM (M = Co, Ni, Fe) polycrystalline alloys are studied by utilizing Auger electron spectroscopy, low energy ion scattering spectroscopy, and ultraviolet photoemission spectroscopy. For each alloy initial surface characterization was done in an ultrahigh vacuum (UHV) system, and depending on preparation procedure it was possible to form surfaces with two different compositions. Due to surface segregation thermodynamics, annealed alloy surfaces form the outermost Pt-skin surface layer, which consists only platinum atoms, while the sputtered surfaces have the bulk ratio of alloying components. The measured valence band density of state spectra clearly shows the differences in electronic structures between Pt-skin and sputtered surfaces. Well-defined surfaces were hereafter transferred out from UHV and exposed to the acidic (electro)chemical environment. The electrochemical and post-electrochemical UHV surface characterizations revealed that Pt-skin surfaces are stable during and af...

PatentDOI
TL;DR: In this article, a convenient process for the regioselective synthesis of 1,5-disubstituted 1,2,3-triazoles and 1,4,5-trisubstitized 1, 2,3, 4,5, 5 triazoles from organic azides and alkynes employs catalytic ruthenium.
Abstract: A convenient process for the regioselective synthesis of 1 ,5-disubstituted 1 ,2,3-triazoles and 1 ,4,5-trisubstituted 1 ,2,3-triazoles from organic azides and alkynes employs catalytic ruthenium.

Journal ArticleDOI
TL;DR: The molecular design of alkyl-functionalized dyes strongly suggests the promising performance of molecular photovoltaics based on organic dyes.
Abstract: We designed and synthesized new alkyl-functionalized organic dyes, MK-1 and MK-2, for dye-sensitized solar cells (DSSCs). Based on the MK-2 dye, a high performance of efficiency (eta, 7.7%; short-circuit current density Jsc = 14.0 mA cm-2, open-circuit voltage Voc = 0.74 V, and fill factor FF = 0.74) was achieved under AM 1.5 G irradiation (100 mW cm-2). Remarkably, the relatively higher Voc for DSSCs based on MK-1 and MK-2 dyes, which have long alkyl chains, were observed among the organic dyes caused by the increasing of the electron lifetime in the conduction band of TiO2. Our molecular design of alkyl-functionalized dyes strongly suggests the promising performance of molecular photovoltaics based on organic dyes.

Journal ArticleDOI
TL;DR: The magnetic separation, luminescent detection, and controlled release of drugs were demonstrated using the uniform mesoporous silica spheres embedded with monodisperse nanocrystals.
Abstract: We synthesized uniform pore-sized mesoporous silica spheres embedded with magnetite nanocrystal and quantum dots. The magnetic separation, luminescent detection, and controlled release of drugs were demonstrated using the uniform mesoporous silica spheres embedded with monodisperse nanocrystals.

Journal ArticleDOI
TL;DR: Experimental and computational evidence indicates that the pivalate anion is a key component in the palladium-pivalic acid cocatalyst system, that it lowers the energy of C-H bond cleavage and acts as a catalytic proton shuttle from benzene to the stoichiometric carbonate base.
Abstract: A palladium−pivalic acid cocatalyst system has been developed that exhibits unprecedented reactivity in direct arylation This reactivity is illustrated with the first examples of high yielding direct metalation−arylation reactions of a completely unactivated arene, benzene Experimental and computational evidence indicates that the pivalate anion is a key component in the palladation/C−H bond breaking event, that it lowers the energy of C−H bond cleavage and acts as a catalytic proton shuttle from benzene to the stoichiometric carbonate base Eight examples of substituted aryl bromides are included which undergo direct arylation with benzene in 55−85% yield

Journal ArticleDOI
TL;DR: These results provide a characterization of the electronic states associated with N impurities in TiO2 and, for the first time, a picture of the processes occurring in the solid under irradiation with visible light.
Abstract: Nitrogen-doped titanium dioxide (N-TiO2), a photocatalytic material active in visible light, has been investigated by a combined experimental and theoretical approach. The material contains single-atom nitrogen impurities that form either diamagnetic (Nb-) or paramagnetic (Nb•) bulk centers. Both types of Nb centers give rise to localized states in the band gap of the oxide. The relative abundance of these species depends on the oxidation state of the solid, as, upon reduction, electron transfer from Ti3+ ions to Nb• results in the formation of Ti4+ and Nb-. EPR spectra measured under irradiation show that Nb centers are responsible for visible light absorption with promotion of electrons from the band gap localized states to the conduction band or to surface-adsorbed electron scavengers. These results provide a characterization of the electronic states associated with N impurities in TiO2 and, for the first time, a picture of the processes occurring in the solid under irradiation with visible light.

Journal ArticleDOI
TL;DR: The air oxidation process does not require the use of toxic or aggressive chemicals, catalysts, or inhibitors and opens avenues for numerous new applications of nanodiamond.
Abstract: The presence of large amounts of nondiamond carbon in detonation-synthesized nanodiamond (ND) severely limits applications of this exciting nanomaterial. We report on a simple and environmentally friendly route involving oxidation in air to selectively remove sp2-bonded carbon from ND. Thermogravimetric analysis and in situ Raman spectroscopy shows that sp2 and sp3 carbon species oxidize with different rates at 375−450 °C and reveals a narrow temperature range of 400−430 °C in which the oxidation of sp2-bonded carbon occurs with no or minimal loss of diamond. X-ray absorption near-edge structure spectroscopy detects an increase of up to 2 orders of magnitude in the sp3/sp2 ratio after oxidation. The content of up to 96% of sp3-bonded carbon in the oxidized samples is comparable to that found in microcrystalline diamond and is unprecedented for ND powders. Transmission electron microscopy and Fourier transform infrared spectroscopy studies show high purity 5-nm ND particles covered by oxygen-containing sur...

Journal ArticleDOI
TL;DR: The present catalytic system has proven to be efficient with as low as 10 parts-per-million (ppm) of precatalyst in the Buchwald-Hartwig reaction and 50 ppm in the Suzuki-Miyaura reaction.
Abstract: A series of (NHC)Pd(R-allyl)Cl complexes [NHC: IPr = N,N‘-bis(2,6-diisopropylphenyl)imidazol-2-ylidene, SIPr = N,N‘-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene; R = H, Me, gem-Me2, Ph] have been synthesized and fully characterized. When compared to (NHC)Pd(allyl)Cl, substitution at the terminal position of the allyl scaffold favors a more facile activation step. This translates into higher catalytic activity in the Suzuki−Miyaura and Buchwald−Hartwig reactions, allowing for the coupling of unactivated aryl chlorides at room temperature in minutes. In the Suzuki−Miyaura reaction, aryl triflates, bromides, and chlorides react with boronic acids using very low catalyst loading. In the N-aryl amination reaction, a wide range of substrates has been coupled efficiently; primary-, secondary-, alkyl-, or aryl-amines react in high yields with unactivated, neutral, and activated aryl chlorides and bromides. In both reactions, extremely hindered substrates such as tri-ortho-substituted biaryls and tetr...

Journal ArticleDOI
TL;DR: Confocal fluorescence micrographs showed that the different surface functionalities of MSNs could also affect their ability to escape endosomal entrapment, which is a key factor in designing effective intracellular delivery vehicles.
Abstract: We have synthesized a series of MCM-41-type mesoporous silica nanoparticles (MSN). The surface of the MSNs are functionalized with 3-aminopropyl (AP), 3-guanidinopropyl (GP), 3-[N-(2-guanidinoethyl)guanidino]propyl (GEGP), and N-folate-3-aminopropyl (FAP). In contrast to the ζ-potential of −18.4 mV for FITC-MSN, the values of ζ-potential for AP-, GP-, GEGP-, and FAP-functionalized FITC-MSNs in 100 mM PBS buffer (pH 7.4) increased positively from −11.3, −10.6, −4.0, to +4.9 mV, respectively. The uptake efficiency, endocytosis mechanism, and biocompatibility of these organically functionalized MSNs were investigated with human cervical cancer cells (HeLa). Flow cytometry results suggested that the endocytosis of MSN could be manipulated by different surface functionalization. The immunocytochemistry study indicated that the uptake of these MSNs by HeLa cells was surface functional group dependent and involved several different mechanisms of endocytosis. Confocal fluorescence micrographs showed that the diff...

Journal ArticleDOI
TL;DR: The results from this work suggest that NMOFs can be used as potential contrast agents for multimodal imaging.
Abstract: Nanoscale metal−organic frameworks (NMOFs) based on Gd3+ centers and benzenedicarboxylate and benzenetricarboxylate bridging ligands were synthesized using reverse microemulsions and characterized using SEM, PXRD, and TGA. These NMOFs exhibit extraordinarily large R1 and R2 relaxivities because of the presence of up to tens of millions of Gd3+ centers in each nanoparticle and are thus efficient T1 and T2 contrast agents for MRI. The NMOFs can also be made highly luminescent by doping with Eu3+ or Tb3+ centers. The results from this work suggest that NMOFs can be used as potential contrast agents for multimodal imaging.