scispace - formally typeset
Search or ask a question

Showing papers in "Journal of the American Chemical Society in 2014"


Journal ArticleDOI
TL;DR: Measurements of activity as a function of film thickness on Au and glassy carbon substrates are consistent with the hypothesis that Fe exerts a partial-charge-transfer activation effect on Ni, similar to that observed for noble-metal electrode surfaces.
Abstract: Fe plays a critical, but not yet understood, role in enhancing the activity of the Ni-based oxygen evolution reaction (OER) electrocatalysts. We report electrochemical, in situ electrical, photoelectron spectroscopy, and X-ray diffraction measurements on Ni1–xFex(OH)2/Ni1–xFexOOH thin films to investigate the changes in electronic properties, OER activity, and structure as a result of Fe inclusion. We developed a simple method for purification of KOH electrolyte that uses precipitated bulk Ni(OH)2 to absorb Fe impurities. Cyclic voltammetry on rigorously Fe-free Ni(OH)2/NiOOH reveals new Ni redox features and no significant OER current until >400 mV overpotential, different from previous reports which were likely affected by Fe impurities. We show through controlled crystallization that β-NiOOH is less active for OER than the disordered γ-NiOOH starting material and that previous reports of increased activity for β-NiOOH are due to incorporation of Fe-impurities during the crystallization process. Through...

2,419 citations


Journal ArticleDOI
TL;DR: A low-temperature vapor-assisted solution process is demonstrated to construct polycrystalline perovskite thin films with full surface coverage, small surface roughness, and grain size up to microscale, paving the way for high reproducibility of films and devices.
Abstract: Hybrid organic/inorganic perovskites (e.g., CH3NH3PbI3) as light absorbers are promising players in the field of third-generation photovoltaics. Here we demonstrate a low-temperature vapor-assisted solution process to construct polycrystalline perovskite thin films with full surface coverage, small surface roughness, and grain size up to microscale. Solar cells based on the as-prepared films achieve high power conversion efficiency of 12.1%, so far the highest efficiency based on CH3NH3PbI3 with the planar heterojunction configuration. This method provides a simple approach to perovskite film preparation and paves the way for high reproducibility of films and devices. The underlying kinetic and thermodynamic parameters regarding the perovskite film growth are discussed as well.

2,136 citations


Journal ArticleDOI
TL;DR: The topotactic fabrication of self-supported nanoporous cobalt phosphide nanowire arrays on carbon cloth via low-temperature phosphidation of the corresponding Co(OH)F/CC precursor offers excellent catalytic performance and durability under neutral and basic conditions.
Abstract: In this Communication, we report the topotactic fabrication of self-supported nanoporous cobalt phosphide nanowire arrays on carbon cloth (CoP/CC) via low-temperature phosphidation of the corresponding Co(OH)F/CC precursor. The CoP/CC, as a robust integrated 3D hydrogen-evolving cathode, shows a low onset overpotential of 38 mV and a small Tafel slope of 51 mV dec–1, and it maintains its catalytic activity for at least 80 000 s in acidic media. It needs overpotentials (η) of 67, 100, and 204 mV to attain current densities of 10, 20, and 100 mA cm–2, respectively. Additionally, this electrode offers excellent catalytic performance and durability under neutral and basic conditions.

2,063 citations


Journal ArticleDOI
TL;DR: MOF-801-P and MOF-841 are the highest performers based on the three criteria stated above; they are water stable, do not lose capacity after five adsorption/desorption cycles, and are easily regenerated at room temperature.
Abstract: Water adsorption in porous materials is important for many applications such as dehumidification, thermal batteries, and delivery of drinking water in remote areas. In this study, we have identified three criteria for achieving high performing porous materials for water adsorption. These criteria deal with condensation pressure of water in the pores, uptake capacity, and recyclability and water stability of the material. In search of an excellently performing porous material, we have studied and compared the water adsorption properties of 23 materials, 20 of which are metal–organic frameworks (MOFs). Among the MOFs are 10 zirconium(IV) MOFs with a subset of these, MOF-801-SC (single crystal form), −802, −805, −806, −808, −812, and −841 reported for the first time. MOF-801-P (microcrystalline powder form) was reported earlier and studied here for its water adsorption properties. MOF-812 was only made and structurally characterized but not examined for water adsorption because it is a byproduct of MOF-841 s...

1,776 citations


Journal ArticleDOI
TL;DR: The achieved ultrahigh oxygen evolution activity and strong durability, with superior performance in comparison to the state-of-the-art noble-metal/transition-metal and nonmetal catalysts, originate from the unique nanowire array electrode configuration and in situ carbon incorporation, which lead to the large active surface area, enhanced mass/charge transport capability, easy release of oxygen gas bubbles, and strong structural stability.
Abstract: Hybrid porous nanowire arrays composed of strongly interacting Co3O4 and carbon were prepared by a facile carbonization of the metal–organic framework grown on Cu foil. The resulting material, possessing a high surface area of 251 m2 g–1 and a large carbon content of 52.1 wt %, can be directly used as the working electrode for oxygen evolution reaction without employing extra substrates or binders. This novel oxygen evolution electrode can smoothly operate in alkaline solutions (e.g., 0.1 and 1.0 M KOH), affording a low onset potential of 1.47 V (vs reversible hydrogen electrode) and a stable current density of 10.0 mA cm–2 at 1.52 V in 0.1 M KOH solution for at least 30 h, associated with a high Faradaic efficiency of 99.3%. The achieved ultrahigh oxygen evolution activity and strong durability, with superior performance in comparison to the state-of-the-art noble-metal/transition-metal and nonmetal catalysts, originate from the unique nanowire array electrode configuration and in situ carbon incorporati...

1,631 citations


Journal ArticleDOI
TL;DR: A new "surface heterojunction" concept is proposed on the basis of the density functional theory (DFT) calculations to explain the difference in the photocatalytic activity of TiO2 with coexposed {001} and {101} facets.
Abstract: Control of TiO2 crystal facets has attracted enormous interest due to the fascinating shape-dependent photocatalytic activity of this material. In this work, the effect of the ratio of {001} and {101} facets on the photocatalytic CO2-reduction performance of anatase TiO2 is reported. A new “surface heterojunction” concept is proposed on the basis of the density functional theory (DFT) calculations to explain the difference in the photocatalytic activity of TiO2 with coexposed {001} and {101} facets.

1,605 citations


Journal ArticleDOI
TL;DR: A two-step reaction for preparing three-dimensional electrodes composed of CoSe2 nanoparticles grown on carbon fiber paper shows excellent catalytic activity for a hydrogen evolution reaction in an acidic electrolyte, and offers an attractive catalyst material for large-scale water-splitting technology.
Abstract: Development of a non-noble-metal hydrogen-producing catalyst is essential to the development of solar water-splitting devices. Improving both the activity and the stability of the catalyst remains a key challenge. In this Communication, we describe a two-step reaction for preparing three-dimensional electrodes composed of CoSe2 nanoparticles grown on carbon fiber paper. The electrode exhibits excellent catalytic activity for a hydrogen evolution reaction in an acidic electrolyte (100 mA/cm2 at an overpotential of ∼180 mV). Stability tests though long-term potential cycles and extended electrolysis confirm the exceptional durability of the catalyst. This development offers an attractive catalyst material for large-scale water-splitting technology.

1,237 citations


Journal ArticleDOI
TL;DR: The results show that CH3NH3Sn(0.5)Pb(0-x)I3 has the broadest light absorption and highest short-circuit photocurrent density ~20 mA cm(-2) (obtained under simulated full sunlight of 100 mW cm−2).
Abstract: Perovskite-based solar cells have recently been catapulted to the cutting edge of thin-film photovoltaic research and development because of their promise for high-power conversion efficiencies and ease of fabrication. Two types of generic perovskites compounds have been used in cell fabrication: either Pb- or Sn-based. Here, we describe the performance of perovskite solar cells based on alloyed perovskite solid solutions of methylammonium tin iodide and its lead analogue (CH3NH3Sn1–xPbxI3). We exploit the fact that, the energy band gaps of the mixed Pb/Sn compounds do not follow a linear trend (the Vegard’s law) in between these two extremes of 1.55 and 1.35 eV, respectively, but have narrower bandgap (<1.3 eV), thus extending the light absorption into the near-infrared (∼1,050 nm). A series of solution-processed solid-state photovoltaic devices using a mixture of organic spiro-OMeTAD/lithium bis(trifluoromethylsulfonyl)imide/pyridinium additives as hole transport layer were fabricated and studied as a f...

1,176 citations


Journal ArticleDOI
TL;DR: Using copper iodide, this work has succeeded in achieving a promising power conversion efficiency of 6.0% with excellent photocurrent stability and impedance spectroscopy revealed that CuI exhibits 2 orders of magnitude higher electrical conductivity than spiro-OMeTAD which allows for significantly higher fill factors.
Abstract: Organo-lead halide perovskite solar cells have emerged as one of the most promising candidates for the next generation of solar cells. To date, these perovskite thin film solar cells have exclusively employed organic hole conducting polymers which are often expensive and have low hole mobility. In a quest to explore new inorganic hole conducting materials for these perovskite-based thin film photovoltaics, we have identified copper iodide as a possible alternative. Using copper iodide, we have succeeded in achieving a promising power conversion efficiency of 6.0% with excellent photocurrent stability. The open-circuit voltage, compared to the best spiro-OMeTAD devices, remains low and is attributed to higher recombination in CuI devices as determined by impedance spectroscopy. However, impedance spectroscopy revealed that CuI exhibits 2 orders of magnitude higher electrical conductivity than spiro-OMeTAD which allows for significantly higher fill factors. Reducing the recombination in these devices could ...

1,169 citations


Journal ArticleDOI
TL;DR: The described electrochemical exfoliation of graphene sheets into aqueous solutions of different inorganic salts shows great promise for the industrial-scale synthesis of high-quality graphene for numerous advanced applications.
Abstract: Mass production of high-quality graphene sheets is essential for their practical application in electronics, optoelectronics, composite materials, and energy-storage devices. Here we report a prompt electrochemical exfoliation of graphene sheets into aqueous solutions of different inorganic salts ((NH4)2SO4, Na2SO4, K2SO4, etc.). Exfoliation in these electrolytes leads to graphene with a high yield (>85%, ≤3 layers), large lateral size (up to 44 μm), low oxidation degree (a C/O ratio of 17.2), and a remarkable hole mobility of 310 cm2 V–1 s–1. Further, highly conductive graphene films (11 Ω sq–1) are readily fabricated on an A4-size paper by applying brush painting of a concentrated graphene ink (10 mg mL–1, in N,N′-dimethylformamide). All-solid-state flexible supercapacitors manufactured on the basis of such graphene films deliver a high area capacitance of 11.3 mF cm–2 and an excellent rate capability of 5000 mV s–1. The described electrochemical exfoliation shows great promise for the industrial-scale ...

1,137 citations


Journal ArticleDOI
TL;DR: A richer surface chemistry for transition metals than previously known is revealed and new insights to guide the development of improved CO2 conversion catalysts are provided.
Abstract: Fuels and industrial chemicals that are conventionally derived from fossil resources could potentially be produced in a renewable, sustainable manner by an electrochemical process that operates at room temperature and atmospheric pressure, using only water, CO2, and electricity as inputs. To enable this technology, improved catalysts must be developed. Herein, we report trends in the electrocatalytic conversion of CO2 on a broad group of seven transition metal surfaces: Au, Ag, Zn, Cu, Ni, Pt, and Fe. Contrary to conventional knowledge in the field, all metals studied are capable of producing methane or methanol. We quantify reaction rates for these two products and describe catalyst activity and selectivity in the framework of CO binding energies for the different metals. While selectivity toward methane or methanol is low for most of these metals, the fact that they are all capable of producing these products, even at a low rate, is important new knowledge. This study reveals a richer surface chemistry ...

Journal ArticleDOI
TL;DR: In this article, the authors report metallic cobalt pyrite (cobalt disulfide, CoS2) as one such high-activity candidate material and demonstrate that its specific morphology plays a crucial role in determining its overall catalytic efficacy.
Abstract: The development of efficient and robust earth-abundant electrocatalysts for the hydrogen evolution reaction (HER) is an ongoing challenge. We report metallic cobalt pyrite (cobalt disulfide, CoS2) as one such high-activity candidate material and demonstrate that its specific morphology—film, microwire, or nanowire, made available through controlled synthesis—plays a crucial role in determining its overall catalytic efficacy. The increase in effective electrode surface area that accompanies CoS2 micro- and nanostructuring substantially boosts its HER catalytic performance, with CoS2 nanowire electrodes achieving geometric current densities of −10 mA cm–2 at overpotentials as low as −145 mV vs the reversible hydrogen electrode. Moreover, micro- and nanostructuring of the CoS2 material has the synergistic effect of increasing its operational stability, cyclability, and maximum achievable rate of hydrogen generation by promoting the release of evolved gas bubbles from the electrode surface. The benefits of ca...

Journal ArticleDOI
TL;DR: The results suggest the possibility for the development of effective and robust OER electrocatalysts by using cheap and easily prepared α-Ni(OH)2 to replace the expensive commercial catalysts such as RuO2 or IrO2.
Abstract: Electrochemical water splitting is a clean technology that can store the intermittent renewable wind and solar energy in H2 fuels. However, large-scale H2 production is greatly hindered by the sluggish oxygen evolution reaction (OER) kinetics at the anode of a water electrolyzer. Although many OER electrocatalysts have been developed to negotiate this difficult reaction, substantial progresses in the design of cheap, robust, and efficient catalysts are still required and have been considered a huge challenge. Herein, we report the simple synthesis and use of α-Ni(OH)2 nanocrystals as a remarkably active and stable OER catalyst in alkaline media. We found the highly nanostructured α-Ni(OH)2 catalyst afforded a current density of 10 mA cm(-2) at a small overpotential of a mere 0.331 V and a small Tafel slope of ~42 mV/decade, comparing favorably with the state-of-the-art RuO2 catalyst. This α-Ni(OH)2 catalyst also presents outstanding durability under harsh OER cycling conditions, and its stability is much better than that of RuO2. Additionally, by comparing the performance of α-Ni(OH)2 with two kinds of β-Ni(OH)2, all synthesized in the same system, we experimentally demonstrate that α-Ni(OH)2 effects more efficient OER catalysis. These results suggest the possibility for the development of effective and robust OER electrocatalysts by using cheap and easily prepared α-Ni(OH)2 to replace the expensive commercial catalysts such as RuO2 or IrO2.

Journal ArticleDOI
TL;DR: Photoluminescence, transient absorption, time-resolved terahertz and microwave conductivity measurements are applied to determine the time scales of generation and recombination of charge carriers as well as their transport properties in solution-processed CH3NH3PbI3 perovskite materials to unravel the remarkable intrinsic properties of the material.
Abstract: Organometal halide perovskite-based solar cells have recently been reported to be highly efficient, giving an overall power conversion efficiency of up to 15%. However, much of the fundamental photophysical properties underlying this performance has remained unknown. Here, we apply photoluminescence, transient absorption, time-resolved terahertz and microwave conductivity measurements to determine the time scales of generation and recombination of charge carriers as well as their transport properties in solution-processed CH3NH3PbI3 perovskite materials. We found that electron–hole pairs are generated almost instantaneously after photoexcitation and dissociate in 2 ps forming highly mobile charges (25 cm2 V–1 s–1) in the neat perovskite and in perovskite/alumina blends; almost balanced electron and hole mobilities remain very high up to the microsecond time scale. When the perovskite is introduced into a TiO2 mesoporous structure, electron injection from perovskite to the metal oxide is efficient in less ...

Journal ArticleDOI
TL;DR: This work reports the preparation of 6 nm-sized nanoparticles of this type by a simple and fast method based on the use of an ammonium bromide with a medium-sized chain that keeps the nanoparticles dispersed in a wide range of organic solvents.
Abstract: To date, there is no example in the literature of free, nanometer-sized, organolead halide CH3NH3PbBr3 perovskites. We report here the preparation of 6 nm-sized nanoparticles of this type by a simple and fast method based on the use of an ammonium bromide with a medium-sized chain that keeps the nanoparticles dispersed in a wide range of organic solvents. These nanoparticles can be maintained stable in the solid state as well as in concentrated solutions for more than three months, without requiring a mesoporous material. This makes it possible to prepare homogeneous thin films of these nanoparticles by spin-coating on a quartz substrate. Both the colloidal solution and the thin film emit light within a narrow bandwidth of the visible spectrum and with a high quantum yield (ca. 20%); this could be advantageous in the design of optoelectronic devices.

Journal ArticleDOI
TL;DR: L lithiated oxygen terminated MXenes surfaces are able to adsorb additional Li beyond a monolayer, providing a mechanism to substantially increase capacity, as observed mainly in delaminated MXenes and confirmed by DFT calculations and XAS.
Abstract: A combination of density functional theory (DFT) calculations and experiments is used to shed light on the relation between surface structure and Li-ion storage capacities of the following functionalized two-dimensional (2D) transition-metal carbides or MXenes: Sc2C, Ti2C, Ti3C2, V2C, Cr2C, and Nb2C The Li-ion storage capacities are found to strongly depend on the nature of the surface functional groups, with O groups exhibiting the highest theoretical Li-ion storage capacities MXene surfaces can be initially covered with OH groups, removable by high-temperature treatment or by reactions in the first lithiation cycle This was verified by annealing f-Nb2C and f-Ti3C2 at 673 and 773 K in vacuum for 40 h and in situ X-ray adsorption spectroscopy (XAS) and Li capacity measurements for the first lithiation/delithiation cycle of f-Ti3C2 The high-temperature removal of water and OH was confirmed using X-ray diffraction and inelastic neutron scattering The voltage profile and X-ray adsorption near edge struc

Journal ArticleDOI
TL;DR: Theoretical/experimental results reveal that the O-vacancies endow 5-atom-thick In2O3 sheets with a new donor level and increased states of density, hence narrowing the band gap from the UV to visible regime and improving the carrier separation efficiency.
Abstract: Finding an ideal model for disclosing the role of oxygen vacancies in photocatalysis remains a huge challenge. Herein, O-vacancies confined in atomically thin sheets is proposed as an excellent platform to study the O-vacancy–photocatalysis relationship. As an example, O-vacancy-rich/-poor 5-atom-thick In2O3 porous sheets are first synthesized via a mesoscopic-assembly fast-heating strategy, taking advantage of an artificial hexagonal mesostructured In-oleate complex. Theoretical/experimental results reveal that the O-vacancies endow 5-atom-thick In2O3 sheets with a new donor level and increased states of density, hence narrowing the band gap from the UV to visible regime and improving the carrier separation efficiency. As expected, the O-vacancy-rich ultrathin In2O3 porous sheets-based photoelectrode exhibits a visible-light photocurrent of 1.73 mA/cm2, over 2.5 and 15 times larger than that of the O-vacancy-poor ultrathin In2O3 porous sheets- and bulk In2O3-based photoelectrodes.

Journal ArticleDOI
TL;DR: The presented activity-selectivity-size relations provide novel insights in the CO2 electroreduction reaction on nanoscale surfaces and lend themselves well to density functional theory (DFT) evaluation and reaction mechanism verification.
Abstract: A study of particle size effects during the catalytic CO2 electroreduction on size-controlled Cu nanoparticles (NPs) is presented. Cu NP catalysts in the 2–15 nm mean size range were prepared, and their catalytic activity and selectivity during CO2 electroreduction were analyzed and compared to a bulk Cu electrode. A dramatic increase in the catalytic activity and selectivity for H2 and CO was observed with decreasing Cu particle size, in particular, for NPs below 5 nm. Hydrocarbon (methane and ethylene) selectivity was increasingly suppressed for nanoscale Cu surfaces. The size dependence of the surface atomic coordination of model spherical Cu particles was used to rationalize the experimental results. Changes in the population of low-coordinated surface sites and their stronger chemisorption were linked to surging H2 and CO selectivities, higher catalytic activity, and smaller hydrocarbon selectivity. The presented activity–selectivity–size relations provide novel insights in the CO2 electroreduction r...

Journal ArticleDOI
TL;DR: In this paper, ultrathin nanoplates of cobalt-manganese layered double hydroxide (CoMn LDH) are a highly active and stable oxygen evolution catalyst.
Abstract: Cost-effective production of solar fuels requires robust and earth-abundant oxygen evolution reaction (OER) catalysts. Herein, we report that ultrathin nanoplates of cobalt–manganese layered double hydroxide (CoMn LDH) are a highly active and stable oxygen evolution catalyst. The catalyst was fabricated by a one-pot coprecipitation method at room temperature, and its turnover frequency (TOF) is more than 20 times higher than the TOFs of Co and Mn oxides and hydroxides, and 9 times higher than the TOF of a precious IrO2 catalyst. The activity of the catalyst was promoted by anodic conditioning, which was proposed to form amorphous regions and reactive Co(IV) species on the surface. The stability of the catalyst was demonstrated by continued electrolysis.

Journal ArticleDOI
TL;DR: Experimental and computational studies suggest that the sorption behavior is related to the hydroxyl groups in activated Ti sites, where Pb(II) ion exchange is facilitated by the formation of a hexagonal potential trap.
Abstract: The functional groups and site interactions on the surfaces of two-dimensional (2D) layered titanium carbide can be tailored to attain some extraordinary physical properties. Herein a 2D alk-MXene (Ti3C2(OH/ONa)xF2–x) material, prepared by chemical exfoliation followed by alkalization intercalation, exhibits preferential Pb(II) sorption behavior when competing cations (Ca(II)/Mg(II)) coexisted at high levels. Kinetic tests show that the sorption equilibrium is achieved in as short a time as 120 s. Attractively, the alk-MXene presents efficient Pb(II) uptake performance with the applied sorption capacities of 4500 kg water per alk-MXene, and the effluent Pb(II) contents are below the drinking water standard recommended by the World Health Organization (10 μg/L). Experimental and computational studies suggest that the sorption behavior is related to the hydroxyl groups in activated Ti sites, where Pb(II) ion exchange is facilitated by the formation of a hexagonal potential trap.

Journal ArticleDOI
TL;DR: This Perspective presents recent advances in macromolecular engineering enabled by ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water.
Abstract: This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP—monomers, initiators, catalysts, and various additives—are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.

Journal ArticleDOI
TL;DR: Enhanced reductive stability of a superconcentrated AN solution is reported and, for the first time, reversible lithium intercalation into a graphite electrode in a reduction-vulnerable AN solvent is demonstrated.
Abstract: The development of a stable, functional electrolyte is urgently required for fast-charging and high-voltage lithium-ion batteries as well as next-generation advanced batteries (e.g., Li–O2 systems). Acetonitrile (AN) solutions are one of the most promising electrolytes with remarkably high chemical and oxidative stability as well as high ionic conductivity, but its low stability against reduction is a critical problem that hinders its extensive applications. Herein, we report enhanced reductive stability of a superconcentrated AN solution (>4 mol dm–3). Applying it to a battery electrolyte, we demonstrate, for the first time, reversible lithium intercalation into a graphite electrode in a reduction-vulnerable AN solvent. Moreover, the reaction kinetics is much faster than in a currently used commercial electrolyte. First-principle calculations combined with spectroscopic analyses reveal that the peculiar reductive stability arises from modified frontier orbital characters unique to such superconcentrated ...

Journal ArticleDOI
TL;DR: High surface area tin oxide nanocrystals prepared by a facile hydrothermal method are evaluated as electrocatalysts toward CO2 reduction to formate and a compromise between the strength of the interaction between CO2(•-) and the nanoscale tin surface and subsequent kinetic activation toward protonation and further reduction is found.
Abstract: High surface area tin oxide nanocrystals prepared by a facile hydrothermal method are evaluated as electrocatalysts toward CO2 reduction to formate. At these novel nanostructured tin catalysts, CO2 reduction occurs selectively to formate at overpotentials as low as ∼340 mV. In aqueous NaHCO3 solutions, maximum Faradaic efficiencies for formate production of >93% have been reached with high stability and current densities of >10 mA/cm(2) on graphene supports. The notable reactivity toward CO2 reduction achieved here may arise from a compromise between the strength of the interaction between CO2(•-) and the nanoscale tin surface and subsequent kinetic activation toward protonation and further reduction.

Journal ArticleDOI
TL;DR: This study may stimulate the development of metal-free electrocatalysts for other key energy conversion processes including hydrogen evolution and oxygen evolution reactions and largely expand the spectrum of catalysts for energy-related electrocatalysis reactions.
Abstract: The mutually corroborated electrochemical measurements and density functional theory (DFT) calculations were used to uncover the origin of electrocatalytic activity of graphene-based electrocatalysts for oxygen reduction reaction (ORR). A series of graphenes doped with nonmetal elements was designed and synthesized, and their ORR performance was evaluated in terms of four electrochemical descriptors: exchange current density, on-set potential, reaction pathway selectivity and kinetic current density. It is shown that these descriptors are in good agreement with DFT calculations, allowing derivation of a volcano plot between the ORR activity and the adsorption free energy of intermediates on metal-free materials, similarly as in the case of metallic catalysts. The molecular orbital concept was used to justify this volcano plot, and to theoretically predict the ORR performance of an ideal graphene-based catalyst, the ORR activity of which is comparable to the state-of-the-art Pt catalyst. Moreover, this study may stimulate the development of metal-free electrocatalysts for other key energy conversion processes including hydrogen evolution and oxygen evolution reactions and largely expand the spectrum of catalysts for energy-related electrocatalysis reactions.

Journal ArticleDOI
TL;DR: This work reports the synthesis and assessment of a new non-precious-metal oxygen reduction reaction (ORR) catalyst from pyrolysis of an iron-coordinated complex which manifests superior activity in both alkaline and acidic media and proposes that the optimal Fe-N/C-800 catalyst displays much greater durability and tolerance of methanol than Pt/C.
Abstract: In this work, we report the synthesis and assessment of a new non-precious-metal oxygen reduction reaction (ORR) catalyst from pyrolysis of an iron-coordinated complex which manifests superior activity in both alkaline and acidic media. 11,11′-bis(dipyrido[3,2-a:2′,3′-c]phenazinyl) (bidppz) was selected as a ligand for the formation of a nitrogen-rich iron-coordinated coordination polymer (Fe–bidppz) which forms a self-supporting catalyst containing high densities of nitrogen and iron doping by pyrolysis. The catalyst pyrolyzed at 800 °C (Fe–N/C-800) shows the highest ORR activity with onset and half-wave potentials of 923 and 809 mV in 0.1 M KOH, respectively, which are comparable to those of Pt/C (half-wave potential 818 mV vs RHE) at the same catalyst loading. Besides, the Fe–N/C-800 catalyst has an excellent ORR activity with onset and half-wave potentials only 38 and 59 mV less than those of the Pt/C catalyst in 0.1 M HClO4. The optimal Fe–N/C-800 catalyst displays much greater durability and toleran...

Journal ArticleDOI
TL;DR: The results not only demonstrate the potential of a notable, affordable, and earth-abundant water oxidation electrocatalyst based on ultrathin CoSe2 nanosheets but also open up a promising avenue into the exploration of excellent active and durable catalysts toward replacing noble metals for oxygen electrocatalysis.
Abstract: According to Yang Shao-Horn's principle, CoSe2 is a promising candidate as an efficient, affordable, and sustainable alternative electrocatalyst for the oxygen evolution reaction, owing to its well-suited electronic configuration of Co ions. However, the catalytic efficiency of pure CoSe2 is still far below what is expected, because of its poor active site exposure yield. Herein, we successfully overcome the disadvantage of insufficient active sites in bulk CoSe2 by reducing its thickness into the atomic scale rather than any additional modification (such as doping or hybridizing with graphene or noble metals). The positron annihilation spectrometry and XAFS spectra provide clear evidence that a large number of VCo″ vacancies formed in the ultrathin nanosheets. The first-principles calculations reveal that these VCo″ vacancies can serve as active sites to efficiently catalyze the oxygen evolution reaction, manifesting an OER overpotential as low as 0.32 V at 10 mA cm(-2) in pH 13 medium, which is superior to the values for its bulk counterparts as well as those for the most reported Co-based electrocatalysts. Considering the outstanding performance of the simple, unmodified ultrathin CoSe2 nanosheets as the only catalyst, further improvement of the catalytic activity is expected when various strategies of doping or hybridizing are used. These results not only demonstrate the potential of a notable, affordable, and earth-abundant water oxidation electrocatalyst based on ultrathin CoSe2 nanosheets but also open up a promising avenue into the exploration of excellent active and durable catalysts toward replacing noble metals for oxygen electrocatalysis.

Journal ArticleDOI
TL;DR: The discovery of the structure-related electrocatalytic activities could provide guidance in the further development of easily prepared, scalable, and low-cost catalysts based on metal oxides and their derivatives.
Abstract: Manganese oxides of various structures (α-, β-, and δ-MnO2 and amorphous) were synthesized by facile methods. The electrocatalytic properties of these materials were systematically investigated for catalyzing both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in alkaline media. Extensive characterization was correlated with the activity study by investigating the crystal structures (XRD, HRTEM), morphologies (SEM), porosities (BET), surfaces (XPS, O2-TPD/MS), and electrochemical properties (Tafel analysis, Koutechy-Levich plots, and constant-current electrolysis). These combined results show that the electrocatalytic activities are strongly dependent on the crystallographic structures, and follow an order of α-MnO2 > AMO > β-MnO2 > δ-MnO2. Both OER studies and ORR studies reveal similar structure-determined activity trends in alkaline media. In the OER studies, α-MnO2 displays an overpotential of 490 mV compared to 380 mV shown by an Ir/C catalyst in reaching 10 mA cm(-2). Meanwhile, α-MnO2 also exhibits stability for 3 h when supplying a constant current density of 5 mA cm(-2). This was further improved by adding Ni(2+) dopants (ca. 8 h). The superior OER activity was attributed to several factors, including abundant di-μ-oxo bridges existing in α-MnO2 as the protonation sites, analogous to the OEC in PS-II of the natural water oxidation system; the mixed valencies (AOS = 3.7); and the lowest charge transfer resistances (91.8 Ω, η = 430 mV) as revealed from in situ electrochemical impedance spectroscopy (EIS). In the ORR studies, when reaching 3 mA cm(-2), α-MnO2 shows 760 mV close to 860 mV for the best ORR catalyst (20% Pt/C). The outstanding ORR activity was due to the strongest O2 adsorption capability of α-MnO2 suggested by temperature-programmed desorption. As a result, this discovery of the structure-related electrocatalytic activities could provide guidance in the further development of easily prepared, scalable, and low-cost catalysts based on metal oxides and their derivatives.

Journal ArticleDOI
TL;DR: This approach has quickly become a powerful and versatile technique for the synthesis of a wide range of bespoke organic diblock copolymer nano-objects of controllable size, morphology, and surface functionality.
Abstract: In this Perspective, we discuss the recent development of polymerization-induced self-assembly mediated by reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization. This approach has quickly become a powerful and versatile technique for the synthesis of a wide range of bespoke organic diblock copolymer nano-objects of controllable size, morphology, and surface functionality. Given its potential scalability, such environmentally-friendly formulations are expected to offer many potential applications, such as novel Pickering emulsifiers, efficient microencapsulation vehicles, and sterilizable thermo-responsive hydrogels for the cost-effective long-term storage of mammalian cells.

Journal ArticleDOI
TL;DR: The facile synthesis of ordered mesoporous black TiO2 (OMBT) materials, which exhibit excellent photocatalytic hydrogen evolution performances and can extend the photoresponse from ultraviolet to visible and infrared light regions and exhibit a high solar-driven hydrogen production rate.
Abstract: Mesoporous TiO2 has gained increasing interest because of its outstanding properties and promising applications in a wide range of fields. Herein, we report the facile synthesis of ordered mesoporous black TiO2 (OMBT) materials, which exhibit excellent photocatalytic hydrogen evolution performances. In this case, the employment of a thermally stable and high-surface-area mesoporous TiO2 as the hydrogenation precursor is the key for fabricating the OMBT materials, which not only facilitate H2 gas diffusion into TiO2 and interaction with their structures but also maintain the ordered mesoporous structures as well as inhibit the phase transformation (from anatase to rutile) and crystal growth during hydrogenation at 500 °C. The resultant OMBT materials possess a relatively high surface area of ∼124 m2 g–1 and a large pore size and pore volume of ∼9.6 nm and 0.24 cm3 g–1, respectively. More importantly, the OMBT materials can extend the photoresponse from ultraviolet to visible and infrared light regions and ...

Journal ArticleDOI
TL;DR: These hybrids provide a tunable platform for combining the facile processability of organic materials with the structural definition of crystalline, inorganic solids.
Abstract: We report on the second family of layered perovskite white-light emitters with improved photoluminescence quantum efficiencies (PLQEs). Upon near-ultraviolet excitation, two new Pb–Cl and Pb–Br perovskites emit broadband “cold” and “warm” white light, respectively, with high color rendition. Emission from large, single crystals indicates an origin from the bulk material and not surface defect sites. The Pb–Br perovskite has a PLQE of 9%, which is undiminished after 3 months of continuous irradiation. Our mechanistic studies indicate that the emission has contributions from strong electron–phonon coupling in a deformable lattice and from a distribution of intrinsic trap states. These hybrids provide a tunable platform for combining the facile processability of organic materials with the structural definition of crystalline, inorganic solids.