Showing papers in "Journal of the American Chemical Society in 2015"
TL;DR: A standard protocol is used as a primary screen for evaluating the activity, short-term (2 h) stability, and electrochemically active surface area (ECSA) of 18 and 26 electrocatalysts for the hydrogen evolution reaction (HER and OER) under conditions relevant to an integrated solar water-splitting device in aqueous acidic or alkaline solution.
Abstract: Objective comparisons of electrocatalyst activity and stability using standard methods under identical conditions are necessary to evaluate the viability of existing electrocatalysts for integration into solar-fuel devices as well as to help inform the development of new catalytic systems. Herein, we use a standard protocol as a primary screen for evaluating the activity, short-term (2 h) stability, and electrochemically active surface area (ECSA) of 18 electrocatalysts for the hydrogen evolution reaction (HER) and 26 electrocatalysts for the oxygen evolution reaction (OER) under conditions relevant to an integrated solar water-splitting device in aqueous acidic or alkaline solution. Our primary figure of merit is the overpotential necessary to achieve a magnitude current density of 10 mA cm–2 per geometric area, the approximate current density expected for a 10% efficient solar-to-fuels conversion device under 1 sun illumination. The specific activity per ECSA of each material is also reported. Among HER...
2,877 citations
TL;DR: High efficiency perovskite solar cells were fabricated reproducibly via Lewis base adduct of lead(II) iodide through interaction between Lewis base DMSO and/or iodide and Lewis acid PbI2 through spin-coating of a DMF solution.
Abstract: High efficiency perovskite solar cells were fabricated reproducibly via Lewis base adduct of lead(II) iodide. PbI2 was dissolved in N,N-dimethyformamide with equimolar N,N-dimethyl sulfoxide (DMSO) and CH3NH3I. Stretching vibration of S═O appeared at 1045 cm–1 for bare DMSO, which was shifted to 1020 and 1015 cm–1 upon reacting DMSO with PbI2 and PbI2 + CH3NH3I, respectively, indicative of forming the adduct of PbI2·DMSO and CH3NH3I·PbI2·DMSO due to interaction between Lewis base DMSO and/or iodide (I–) and Lewis acid PbI2. Spin-coating of a DMF solution containing PbI2, CH3NH3I, and DMSO (1:1:1 mol %) formed a transparent adduct film, which was converted to a dark brown film upon heating at low temperature of 65 °C for 1 min due to removal of the volatile DMSO from the adduct. The adduct-induced CH3NH3PbI3 exhibited high charge extraction characteristics with hole mobility as high as 3.9 × 10–3 cm2/(V s) and slow recombination rate. Average power conversion efficiency (PCE) of 18.3% was achieved from 41 ...
1,960 citations
TL;DR: It is established that Fe(3+) in Ni(1-x)Fe(x)OOH occupies octahedral sites with unusually short Fe-O bond distances, induced by edge-sharing with surrounding [NiO6] octahedra, which results in near optimal adsorption energies of OER intermediates and low overpotentials at Fe sites.
Abstract: Highly active catalysts for the oxygen evolution reaction (OER) are required for the development of photoelectrochemical devices that generate hydrogen efficiently from water using solar energy. Here, we identify the origin of a 500-fold OER activity enhancement that can be achieved with mixed (Ni,Fe)oxyhydroxides (Ni(1-x)Fe(x)OOH) over their pure Ni and Fe parent compounds, resulting in one of the most active currently known OER catalysts in alkaline electrolyte. Operando X-ray absorption spectroscopy (XAS) using high energy resolution fluorescence detection (HERFD) reveals that Fe(3+) in Ni(1-x)Fe(x)OOH occupies octahedral sites with unusually short Fe-O bond distances, induced by edge-sharing with surrounding [NiO6] octahedra. Using computational methods, we establish that this structural motif results in near optimal adsorption energies of OER intermediates and low overpotentials at Fe sites. By contrast, Ni sites in Ni(1-x)Fe(x)OOH are not active sites for the oxidation of water.
1,850 citations
TL;DR: It is demonstrated that, via controlled anion exchange reactions using a range of different halide precursors, this approach gives access to perovskite semiconductor NCs with both structural and optical qualities comparable to those of directly synthesized NCs.
Abstract: We demonstrate that, via controlled anion exchange reactions using a range of different halide precursors, we can finely tune the chemical composition and the optical properties of presynthesized colloidal cesium lead halide perovskite nanocrystals (NCs), from green emitting CsPbBr3 to bright emitters in any other region of the visible spectrum, and back, by displacement of Cl– or I– ions and reinsertion of Br– ions. This approach gives access to perovskite semiconductor NCs with both structural and optical qualities comparable to those of directly synthesized NCs. We also show that anion exchange is a dynamic process that takes place in solution between NCs. Therefore, by mixing solutions containing perovskite NCs emitting in different spectral ranges (due to different halide compositions) their mutual fast exchange dynamics leads to homogenization in their composition, resulting in NCs emitting in a narrow spectral region that is intermediate between those of the parent nanoparticles.
1,658 citations
TL;DR: The homologous 2D halide perovskites define a promising class of stable and efficient light-absorbing materials for solid-state photovoltaics and other applications.
Abstract: We report on the fabrication and properties of the semiconducting 2D (CH3(CH2)3NH3)2(CH3NH3)n–1PbnI3n+1 (n = 1, 2, 3, and 4) perovskite thin films. The band gaps of the series decrease with increasing n values, from 2.24 eV (CH3(CH2)3NH3)2PbI4 (n = 1) to 1.52 eV CH3NH3PbI3 (n = ∞). The compounds exhibit strong light absorption in the visible region, accompanied by strong photoluminescence at room temperature, rendering them promising light absorbers for photovoltaic applications. Moreover, we find that thin films of the semi-2D perovskites display an ultrahigh surface coverage as a result of the unusual film self-assembly that orients the [PbnI3n+1]− layers perpendicular to the substrates. We have successfully implemented this 2D perovskite family in solid-state solar cells, and obtained an initial power conversion efficiency of 4.02%, featuring an open-circuit voltage (Voc) of 929 mV and a short-circuit current density (Jsc) of 9.42 mA/cm2 from the n = 3 compound. This result is even more encouraging con...
1,589 citations
TL;DR: Inspired by the superiority of carbon conductivity, the propitious H atom binding energy of metallic cobalt, and better OER activity of cobalt oxide, cobalt-cobalt oxide/N-doped carbon hybrids (CoOx@CN) composed of Co(0), CoO, Co3O4 applied to HER and OER are synthesized.
Abstract: Remarkable hydrogen evolution reaction (HER) or superior oxygen evolution reaction (OER) catalyst has been applied in water splitting, however, utilizing a bifunctional catalyst for simultaneously generating H2 and O2 is still a challenging issue, which is crucial for improving the overall efficiency of water electrolysis Herein, inspired by the superiority of carbon conductivity, the propitious H atom binding energy of metallic cobalt, and better OER activity of cobalt oxide, we synthesized cobalt–cobalt oxide/N-doped carbon hybrids (CoOx@CN) composed of Co0, CoO, Co3O4 applied to HER and OER by simple one-pot thermal treatment method CoOx@CN exhibited a small onset potential of 85 mV, low charge-transfer resistance (41 Ω), and considerable stability for HER Electrocatalytic experiments further indicated the better performance of CoOx@CN for HER can be attributed to the high conductivity of carbon, the synergistic effect of metallic cobalt and cobalt oxide, the stability of carbon-encapsulated Co nano
1,508 citations
TL;DR: Experimental results and theoretical calculations indicate that Ni3S2/NF's excellent catalytic activity is mainly due to the synergistic catalytic effects produced in it by its nanosheet arrays and exposed {2̅10} high-index facets.
Abstract: Elaborate design of highly active and stable catalysts from Earth-abundant elements has great potential to produce materials that can replace the noble-metal-based catalysts commonly used in a range of useful (electro)chemical processes. Here we report, for the first time, a synthetic method that leads to in situ growth of {210} high-index faceted Ni3S2 nanosheet arrays on nickel foam (NF). We show that the resulting material, denoted Ni3S2/NF, can serve as a highly active, binder-free, bifunctional electrocatalyst for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Ni3S2/NF is found to give ∼100% Faradaic yield toward both HER and OER and to show remarkable catalytic stability (for >200 h). Experimental results and theoretical calculations indicate that Ni3S2/NF’s excellent catalytic activity is mainly due to the synergistic catalytic effects produced in it by its nanosheet arrays and exposed {210} high-index facets.
1,459 citations
TL;DR: It is hypothesized that Fe is the most-active site in the catalyst, while CoOOH primarily provides a conductive, high-surface area, chemically stabilizing host.
Abstract: Cobalt oxides and (oxy)hydroxides have been widely studied as electrocatalysts for the oxygen evolution reaction (OER). For related Ni-based materials, the addition of Fe dramatically enhances OER activity. The role of Fe in Co-based materials is not well-documented. We show that the intrinsic OER activity of Co1–xFex(OOH) is ∼100-fold higher for x ≈ 0.6–0.7 than for x = 0 on a per-metal turnover frequency basis. Fe-free CoOOH absorbs Fe from electrolyte impurities if the electrolyte is not rigorously purified. Fe incorporation and increased activity correlate with an anodic shift in the nominally Co2+/3+ redox wave, indicating strong electronic interactions between the two elements and likely substitutional doping of Fe for Co. In situ electrical measurements show that Co1–xFex(OOH) is conductive under OER conditions (∼0.7–4 mS cm–1 at ∼300 mV overpotential), but that FeOOH is an insulator with measurable conductivity (2.2 × 10–2 mS cm–1) only at high overpotentials >400 mV. The apparent OER activity of ...
1,449 citations
TL;DR: To improve the performance of carbon K-ion anodes, this work synthesized a nongraphitic soft carbon that exhibits cyclability and rate capability much superior to that of graphite.
Abstract: We for the first time report electrochemical potassium insertion in graphite in a nonaqueous electrolyte, which can exhibit a high reversible capacity of 273 mAh/g Ex situ XRD studies confirm that KC36, KC24, and KC8 sequentially form upon potassiation, whereas depotassiation recovers graphite through phase transformations in an opposite sequence Graphite shows moderate rate capability and relatively fast capacity fading To improve the performance of carbon K-ion anodes, we synthesized a nongraphitic soft carbon that exhibits cyclability and rate capability much superior to that of graphite This work may open up a new paradigm toward rechargeable K-ion batteries
1,423 citations
TL;DR: It is demonstrated that efficient fixation of N2 to NH3 can proceed under room temperature and atmospheric pressure in water using visible light illuminated BiOBr nanosheets of oxygen vacancies in the absence of any organic scavengers and precious-metal cocatalysts.
Abstract: Even though the well-established Haber–Bosch process has been the major artificial way to “fertilize” the earth, its energy-intensive nature has been motivating people to learn from nitrogenase, which can fix atmospheric N2 to NH3 in vivo under mild conditions with its precisely arranged proteins Here we demonstrate that efficient fixation of N2 to NH3 can proceed under room temperature and atmospheric pressure in water using visible light illuminated BiOBr nanosheets of oxygen vacancies in the absence of any organic scavengers and precious-metal cocatalysts The designed catalytic oxygen vacancies of BiOBr nanosheets on the exposed {001} facets, with the availability of localized electrons for π-back-donation, have the ability to activate the adsorbed N2, which can thus be efficiently reduced to NH3 by the interfacial electrons transferred from the excited BiOBr nanosheets This study might open up a new vista to fix atmospheric N2 to NH3 through the less energy-demanding photochemical process
1,345 citations
TL;DR: Electrochemical data strongly demonstrate that this nanoporous hybrid carbon material integrates the advantageous properties of the individual NC and GC, exhibiting a distinguished specific capacitance calculated from the galvanostatic charge-discharge curves at a current density of 2 A·g(-1).
Abstract: Core–shell structured ZIF-8@ZIF-67 crystals are well-designed and prepared through a seed-mediated growth method. After thermal treatment of ZIF-8@ZIF-67 crystals, we obtain selectively functionalized nanoporous hybrid carbon materials consisting of nitrogen-doped carbon (NC) as the cores and highly graphitic carbon (GC) as the shells. This is the first example of the integration of NC and GC in one particle at the nanometer level. Electrochemical data strongly demonstrate that this nanoporous hybrid carbon material integrates the advantageous properties of the individual NC and GC, exhibiting a distinguished specific capacitance (270 F·g–1) calculated from the galvanostatic charge–discharge curves at a current density of 2 A·g–1. Our study not only bridges diverse carbon-based materials with infinite metal–organic frameworks but also opens a new avenue for artificially designed nanoarchitectures with target functionalities.
TL;DR: Femtosecond transient absorption spectroscopic measurements show the effect that humidity has on the ultrafast excited state dynamics of CH(3)NH( 3)PbI(3).
Abstract: Humidity has been an important factor, in both negative and positive ways, in the development of perovskite solar cells and will prove critical in the push to commercialize this exciting new photovoltaic technology. The interaction between CH(3)NH(3)PbI(3) and H(2)O vapor is investigated by characterizing the ground-state and excited-state optical absorption properties and probing morphology and crystal structure. These undertakings reveal that H(2)O exposure does not simply cause CH(3)NH(3)PbI(3) to revert to PbI(2). It is shown that, in the dark, H(2)O is able to complex with the perovskite, forming a hydrate product similar to (CH(3)NH(3))(4)PbI(6)·2H(2)O. This causes a decrease in absorption across the visible region of the spectrum and a distinct change in the crystal structure of the material. Femtosecond transient absorption spectroscopic measurements show the effect that humidity has on the ultrafast excited state dynamics of CH(3)NH(3)PbI(3). More importantly, the deleterious effects of humidity on complete solar cells, specifically on photovoltaic efficiency and stability, are explored in the light of these spectroscopic understandings.
TL;DR: Low-temperature solution-processed nanocrystalline SnO2 can be an excellent alternative ETL material for efficient perovskite solar cells and its best-performing planar cell has achieved an average efficiency of 16.02%.
Abstract: Lead halide perovskite solar cells with the high efficiencies typically use high-temperature processed TiO2 as the electron transporting layers (ETLs). Here, we demonstrate that low-temperature solution-processed nanocrystalline SnO2 can be an excellent alternative ETL material for efficient perovskite solar cells. Our best-performing planar cell using such a SnO2 ETL has achieved an average efficiency of 16.02%, obtained from efficiencies measured from both reverse and forward voltage scans. The outstanding performance of SnO2 ETLs is attributed to the excellent properties of nanocrystalline SnO2 films, such as good antireflection, suitable band edge positions, and high electron mobility. The simple low-temperature process is compatible with the roll-to-roll manufacturing of low-cost perovskite solar cells on flexible substrates.
TL;DR: The designed synthesis of novel box-in-box nanocages with different shell compositions, namely, Co3O4/NiCo2O4 double-shelled nanocage (DSNCs) with greatly improved electrochemical performance demonstrates the importance of rational design and synthesis of hollow structures with higher complexity.
Abstract: Hollow structures with high complexity in shell architecture and composition have attracted tremendous interest because of their great importance for both fundamental studies and practical applications. Herein we report the designed synthesis of novel box-in-box nanocages (NCs) with different shell compositions, namely, Co3O4/NiCo2O4 double-shelled nanocages (DSNCs). Uniform zeolitic imidazolate framework-67/Ni–Co layered double hydroxides yolk-shelled structures are first synthesized and then transformed into Co3O4/NiCo2O4 DSNCs by thermal annealing in air. Importantly, this strategy can be easily extended to prepare other complex DSNCs. When evaluated as electrodes for pseudocapacitors, the Co3O4/NiCo2O4 DSNCs show a high specific capacitance of 972 F g–1 at a current density of 5 A g–1 and excellent stability with 92.5% capacitance retention after 12 000 cycles, superior to that of Co3O4 NCs with simple configuration and Co3O4/Co3O4 DSNCs. Besides, the Co3O4/NiCo2O4 DSNCs also exhibit much better elect...
TL;DR: The synthesis of quantum confined all inorganic cesium lead halide nanoplates in the perovskite crystal structure that are also highly luminescent (PLQY 84%) and controllable self-assembly of nanoplate either into stacked columnar phases or crystallographic-oriented thin-sheet structures is demonstrated.
Abstract: Anisotropic colloidal quasi-two-dimensional nanoplates (NPLs) hold great promise as functional materials due to their combination of low dimensional optoelectronic properties and versatility through colloidal synthesis. Recently, lead-halide perovskites have emerged as important optoelectronic materials with excellent efficiencies in photovoltaic and light-emitting applications. Here we report the synthesis of quantum confined all inorganic cesium lead halide nanoplates in the perovskite crystal structure that are also highly luminescent (PLQY 84%). The controllable self-assembly of nanoplates either into stacked columnar phases or crystallographic-oriented thin-sheet structures is demonstrated. The broad accessible emission range, high native quantum yields, and ease of self-assembly make perovskite NPLs an ideal platform for fundamental optoelectronic studies and the investigation of future devices.
TL;DR: The finding suggests that metallic nitride nanosheets could serve as a new group of OER electrocatalysts with excellent property, and benefitting from enhanced electrical conductivity with metallic behavior and atomically disordered structure compared with bulk Ni3N and NiO nanOSheets.
Abstract: Exploring efficient and inexpensive oxygen evolution reaction (OER) electrocatalysts is of great importance for various electrochemical energy storage and conversion technologies. Ni-based electrocatalysts have been actively pursued because of their promising activity and earth abundance. However, the OER efficiency for most of the developed Ni-based electrocatalysts has been intrinsically limited due to their low electrical conductivity and poor active site exposure yield. Herein, we report metallic Ni3N nanosheets as an efficient OER electrocatalyst for the first time. The first-principles calculations and electrical transport property measurements unravel that the Ni3N is intrinsically metallic, and the carrier concentration can be remarkably improved with dimensional confinement. The EXAFS spectra provide solid evidence that the Ni3N nanosheets have disordered structure resultant of dimensional reduction, which then could provide more active sites for OER. Benefiting from enhanced electrical conductiv...
TL;DR: Th thin films of nanosized metal-organic frameworks (MOFs) are introduced as atomically defined and nanoscopic materials that function as catalysts for the efficient and selective reduction of carbon dioxide to carbon monoxide in aqueous electrolytes.
Abstract: A key challenge in the field of electrochemical carbon dioxide reduction is the design of catalytic materials featuring high product selectivity, stability, and a composition of earth-abundant elements. In this work, we introduce thin films of nanosized metal-organic frameworks (MOFs) as atomically defined and nanoscopic materials that function as catalysts for the efficient and selective reduction of carbon dioxide to carbon monoxide in aqueous electrolytes. Detailed examination of a cobalt-porphyrin MOF, Al2(OH)2TCPP-Co (TCPP-H2 = 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrabenzoate) revealed a selectivity for CO production in excess of 76% and stability over 7 h with a per-site turnover number (TON) of 1400. In situ spectroelectrochemical measurements provided insights into the cobalt oxidation state during the course of reaction and showed that the majority of catalytic centers in this MOF are redox-accessible where Co(II) is reduced to Co(I) during catalysis.
TL;DR: A volcano-like curve of the turnover frequency for CO production within the size range suggests that CO2 adsorption, COOH* formation, and CO* removal during CO2 reduction can be tuned by varying the size of Pd NPs due to the changing ratio of corner, edge, and terrace sites.
Abstract: Size effect has been regularly utilized to tune the catalytic activity and selectivity of metal nanoparticles (NPs). Yet, there is a lack of understanding of the size effect in the electrocatalytic reduction of CO2, an important reaction that couples with intermittent renewable energy storage and carbon cycle utilization. We report here a prominent size-dependent activity/selectivity in the electrocatalytic reduction of CO2 over differently sized Pd NPs, ranging from 2.4 to 10.3 nm. The Faradaic efficiency for CO production varies from 5.8% at -0.89 V (vs reversible hydrogen electrode) over 10.3 nm NPs to 91.2% over 3.7 nm NPs, along with an 18.4-fold increase in current density. Based on the Gibbs free energy diagrams from density functional theory calculations, the adsorption of CO2 and the formation of key reaction intermediate COOH* are much easier on edge and corner sites than on terrace sites of Pd NPs. In contrast, the formation of H* for competitive hydrogen evolution reaction is similar on all three sites. A volcano-like curve of the turnover frequency for CO production within the size range suggests that CO2 adsorption, COOH* formation, and CO* removal during CO2 reduction can be tuned by varying the size of Pd NPs due to the changing ratio of corner, edge, and terrace sites.
TL;DR: An approach to designing tight-binding ligands with a substantial reduction in false positives relative to compounds synthesized on the basis of other computational or medicinal chemistry approaches is reported, demonstrating the robustness and broad range of applicability of this approach, which can be used to drive decisions in lead optimization.
Abstract: Designing tight-binding ligands is a primary objective of small-molecule drug discovery. Over the past few decades, free-energy calculations have benefited from improved force fields and sampling algorithms, as well as the advent of low-cost parallel computing. However, it has proven to be challenging to reliably achieve the level of accuracy that would be needed to guide lead optimization (∼5× in binding affinity) for a wide range of ligands and protein targets. Not surprisingly, widespread commercial application of free-energy simulations has been limited due to the lack of large-scale validation coupled with the technical challenges traditionally associated with running these types of calculations. Here, we report an approach that achieves an unprecedented level of accuracy across a broad range of target classes and ligands, with retrospective results encompassing 200 ligands and a wide variety of chemical perturbations, many of which involve significant changes in ligand chemical structures. In addition, we have applied the method in prospective drug discovery projects and found a significant improvement in the quality of the compounds synthesized that have been predicted to be potent. Compounds predicted to be potent by this approach have a substantial reduction in false positives relative to compounds synthesized on the basis of other computational or medicinal chemistry approaches. Furthermore, the results are consistent with those obtained from our retrospective studies, demonstrating the robustness and broad range of applicability of this approach, which can be used to drive decisions in lead optimization.
TL;DR: The exfoliated black phosphorus nanosheets are demonstrated to be effective photosensitizers for the generation of singlet oxygen with a high quantum yield of about 0.91, rendering their attractive applications in catalysis and photodynamic therapy.
Abstract: Benefiting from its strong oxidizing properties, the singlet oxygen has garnered serious attentions in physical, chemical, as well as biological studies. However, the photosensitizers for the generation of singlet oxygen bear in low quantum yields, lack of long wavelength absorption band, poor biocompatibility, undegradable in living tissues, and so on. Here we first demonstrate the exfoliated black phosphorus nanosheets to be effective photosensitizers for the generation of singlet oxygen with a high quantum yield of about 0.91, rendering their attractive applications in catalysis and photodynamic therapy. Through in vitro and in vivo studies, the water dispersible black phosphorus nanosheets show notable cancer therapy ability. In addition, the photodegradable character of black phosphorus from element to biocompatible phosphorus oxides further highlights its therapeutic potential against cancer. This study will not only expand the breadth of study in black phosphorus but also offer an efficient catalys...
TL;DR: PCN-222 significantly enhances photocatalytic conversion of CO2 into formate anion compared to the corresponding porphyrin ligand itself, which provides important insights into the design of MOF-based materials for CO2 capture and photoreduction.
Abstract: It is highly desirable to convert CO2 to valuable fuels or chemicals by means of solar energy, which requires CO2 enrichment around photocatalysts from the atmosphere. Here we demonstrate that a porphyrin-involved metal–organic framework (MOF), PCN-222, can selectively capture and further photoreduce CO2 with high efficiency under visible-light irradiation. Mechanistic information gleaned from ultrafast transient absorption spectroscopy (combined with time-resolved photoluminescence spectroscopy) has elucidated the relationship between the photocatalytic activity and the electron–hole separation efficiency. The presence of a deep electron trap state in PCN-222 effectively inhibits the detrimental, radiative electron–hole recombination. As a direct result, PCN-222 significantly enhances photocatalytic conversion of CO2 into formate anion compared to the corresponding porphyrin ligand itself. This work provides important insights into the design of MOF-based materials for CO2 capture and photoreduction.
TL;DR: In this article, the atomically dispersed Pd on graphene can be fabricated using the atomic layer deposition technique, and the single-atom Pd1/graphene catalyst showed about 100% butenes selectivity at 95% conversion at a mild reaction condition of about 50 °C, likely due to the changes of 1,3-butadiene adsorption mode and enhanced steric effect on the isolated Pd atoms.
Abstract: We reported that atomically dispersed Pd on graphene can be fabricated using the atomic layer deposition technique. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy both confirmed that isolated Pd single atoms dominantly existed on the graphene support. In selective hydrogenation of 1,3-butadiene, the single-atom Pd1/graphene catalyst showed about 100% butenes selectivity at 95% conversion at a mild reaction condition of about 50 °C, which is likely due to the changes of 1,3-butadiene adsorption mode and enhanced steric effect on the isolated Pd atoms. More importantly, excellent durability against deactivation via either aggregation of metal atoms or carbonaceous deposits during a total 100 h of reaction time on stream was achieved. Therefore, the single-atom catalysts may open up more opportunities to optimize the activity, selectivity, and durability in selective hydrogenation reactions.
TL;DR: A catalyst-free, solution-phase synthesis of CsPbX3 nanowires (NWs) with well-defined morphology could serve as an ideal platform for the investigation of fundamental properties and the development of future applications in nanoscale optoelectronic devices based on all-inorganic perovskites.
Abstract: Halide perovskites have attracted much attention over the past 5 years as a promising class of materials for optoelectronic applications. However, compared to hybrid organic–inorganic perovskites, the study of their pure inorganic counterparts, like cesium lead halides (CsPbX3), lags far behind. Here, a catalyst-free, solution-phase synthesis of CsPbX3 nanowires (NWs) is reported. These NWs are single-crystalline, with uniform growth direction, and crystallize in the orthorhombic phase. Both CsPbBr3 and CsPbI3 are photoluminescence active, with composition-dependent temperature and self-trapping behavior. These NWs with a well-defined morphology could serve as an ideal platform for the investigation of fundamental properties and the development of future applications in nanoscale optoelectronic devices based on all-inorganic perovskites.
TL;DR: The articulation of the notion of "frustrated Lewis pairs" (FLPs), which emerged from the discovery that H2 can be reversibly activated by combinations of sterically encumbered Lewis acids and bases, has prompted a great deal of recent activity in development of FLP catalysts for the hydrogenation of a range of organic substrates.
Abstract: The articulation of the notion of “frustrated Lewis pairs” (FLPs), which emerged from the discovery that H2 can be reversibly activated by combinations of sterically encumbered Lewis acids and bases, has prompted a great deal of recent activity. Perhaps the most remarkable consequence has been the development of FLP catalysts for the hydrogenation of a range of organic substrates. In the past 9 years, the substrate scope has evolved from bulky polar species to include a wide range of unsaturated organic molecules. In addition, effective stereoselective metal-free hydrogenation catalysts have begun to emerge. The mechanism of this activation of H2 has been explored, and the nature and range of Lewis acid/base combinations capable of effecting such activation have also expanded to include a variety of non-metal species. The reactivity of FLPs with a variety of other small molecules, including olefins, alkynes, and a range of element oxides, has also been developed. Although much of this latter chemistry has...
TL;DR: Hole traps on the surfaces of three-dimensional CH3NH3PbI3 perovskite thin films and excitonic traps below the optical gaps in these materials are provided and explained, explaining a widely known mystery on the much better solar cell performance of the former.
Abstract: Recent discoveries of highly efficient solar cells based on lead iodide perovskites have led to a surge in research activity on understanding photo carrier generation in these materials, but little is known about trap states that may be detrimental to solar cell performance. Here we provide direct evidence for hole traps on the surfaces of three-dimensional (3D) CH3NH3PbI3 perovskite thin films and excitonic traps below the optical gaps in these materials. The excitonic traps possess weak optical transition strengths, can be populated from the relaxation of above gap excitations, and become more significant as dimensionality decreases from 3D CH3NH3PbI3 to two-dimensional (2D) (C4H9NH3I)2(CH3NH3I)n−1(PbI2)n (n = 1, 2, 3) perovskites and, within the 2D family, as n decreases from 3 to 1. We also show that the density of excitonic traps in CH3NH3PbI3 perovskite thin films grown in the presence of chloride is at least one-order of magnitude lower than that grown in the absence of chloride, thus explaining a ...
TL;DR: A one-pot, large-scale protocol for the controlled synthesis of new one-dimensional bamboo-like carbon nanotube/Fe(3)C nanoparticle hybrid nanoelectrocatalysts, which are directly prepared by annealing a mixture of PEG-PPG-PEG Pluronic P123, melamine, and Fe(NO(3))( 3) at 800 °C in N(2).
Abstract: The design of a new class of non-noble-metal catalysts with oxygen reduction reaction (ORR) activity superior to that of Pt is extremely important for future fuel cell devices. Here we demonstrate a one-pot, large-scale protocol for the controlled synthesis of new one-dimensional bamboo-like carbon nanotube/Fe3C nanoparticle hybrid nanoelectrocatalysts, which are directly prepared by annealing a mixture of PEG-PPG-PEG Pluronic P123, melamine, and Fe(NO3)3 at 800 °C in N2. The resulting hybrid electrocatalysts show very high ORR activity with a half-wave potential of 0.861 V (vs reversible hydrogen electrode) in 0.10 M KOH solution, 49 mV more positive than that of 20 wt% Pt/C catalyst. Furthermore, they exhibit good ORR activity in acidic media, with an onset potential comparable to that of the Pt/C catalyst. Most importantly, they show much higher stability and better methanol tolerance, with almost no ORR polarization curve shift and no change of the oxygen reduction peak in the cyclic voltammogram in t...
TL;DR: The results demonstrate that a fine and balanced modification/design of chemical structure can make significant performance differences and that the performance of solution-processed small-molecule-based solar cells can be comparable to or even surpass that of their polymer counterparts.
Abstract: A series of acceptor-donor-acceptor simple oligomer-like small molecules based on oligothiophenes, namely, DRCN4T-DRCN9T, were designed and synthesized. Their optical, electrical, and thermal properties and photovoltaic performances were systematically investigated. Except for DRCN4T, excellent performances were obtained for DRCN5T-DRCN9T. The devices based on DRCN5T, DRCN7T, and DRCN9T with axisymmetric chemical structures exhibit much higher short-circuit current densities than those based on DRCN6T and DRCN8T with centrosymmetric chemical structures, which is attributed to their well-developed fibrillar network with a feature size less than 20 nm. The devices based on DRCN5T/PC71BM showed a notable certified power conversion efficiency (PCE) of 10.10% under AM 1.5G irradiation (100 mW cm(-2)) using a simple solution spin-coating fabrication process. This is the highest PCE for single-junction small-molecule-based organic photovoltaics (OPVs) reported to date. DRCN5T is a rather simpler molecule compared with all of the other high-performance molecules in OPVs to date, and this might highlight its advantage in the future possible commercialization of OPVs. These results demonstrate that a fine and balanced modification/design of chemical structure can make significant performance differences and that the performance of solution-processed small-molecule-based solar cells can be comparable to or even surpass that of their polymer counterparts.
TL;DR: An effective strategy was developed to reduce the bulk electric resistance of MOFs by interweaving MOF crystals with polyaniline chains that are electrochemically deposited on MOFs without altering the underlying structure of the MOF.
Abstract: Metal–organic frameworks (MOFs) have received increasing attention as promising electrode materials in supercapacitors (SCs). Yet poor conductivity in most MOFs largely thwarts their capacitance and/or rate performance. In this work, an effective strategy was developed to reduce the bulk electric resistance of MOFs by interweaving MOF crystals with polyaniline (PANI) chains that are electrochemically deposited on MOFs. Specifically we synthesized cobalt-based MOF crystals (ZIF-67) onto carbon cloth (CC) and further electrically deposited PANI to give a flexible conductive porous electrode (noted as PANI-ZIF-67-CC) without altering the underlying structure of the MOF. Electrochemical studies showed that the PANI-ZIF-67-CC exhibits an extraordinary areal capacitance of 2146 mF cm–2 at 10 mV s–1. A symmetric flexible solid-state supercapacitor was also assembled and tested. This strategy may shed light on designing new MOF-based supercapacitors and other electrochemical devices.
TL;DR: This work produces the most active HER catalyst based on iron pyrite, suggesting a scalable, low cost, and highly efficient catalyst for hydrogen generation.
Abstract: Hydrogen evolution reaction (HER) from water through electrocatalysis using cost-effective materials to replace precious Pt catalysts holds great promise for clean energy technologies. In this work we developed a highly active and stable catalyst containing Co doped earth abundant iron pyrite FeS2 nanosheets hybridized with carbon nanotubes (Fe1–xCoxS2/CNT hybrid catalysts) for HER in acidic solutions. The pyrite phase of Fe1–xCoxS2/CNT was characterized by powder X-ray diffraction and absorption spectroscopy. Electrochemical measurements showed a low overpotential of ∼0.12 V at 20 mA/cm2, small Tafel slope of ∼46 mV/decade, and long-term durability over 40 h of HER operation using bulk quantities of Fe0.9Co0.1S2/CNT hybrid catalysts at high loadings (∼7 mg/cm2). Density functional theory calculation revealed that the origin of high catalytic activity stemmed from a large reduction of the kinetic energy barrier of H atom adsorption on FeS2 surface upon Co doping in the iron pyrite structure. It is also fo...
TL;DR: Three-dimensional porous crystalline polyimide covalent organic frameworks (termed PI-COFs) have been synthesized and show high thermal stability and surface area and high loading and good release control for drug delivery applications.
Abstract: Three-dimensional porous crystalline polyimide covalent organic frameworks (termed PI-COFs) have been synthesized. These PI-COFs feature non- or interpenetrated structures that can be obtained by choosing tetrahedral building units of different sizes. Both PI-COFs show high thermal stability (>450 °C) and surface area (up to 2403 m2 g–1). They also show high loading and good release control for drug delivery applications.