Materials Science & Engineering R-reports 

About: Materials Science & Engineering R-reports is an academic journal. The journal publishes majorly in the area(s): Semiconductor & Wafer. Over the lifetime, 389 publication(s) have been published receiving 103581 citation(s).

Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials

Abstract: This review aims at reporting on very recent developments in syntheses, properties and (future) applications of polymer-layered silicate nanocomposites. This new type of materials, based on smectite clays usually rendered hydrophobic through ionic exchange of the sodium interlayer cation with an onium cation, may be prepared via various synthetic routes comprising exfoliation adsorption, in situ intercalative polymerization and melt intercalation. The whole range of polymer matrices is covered, i.e. thermoplastics, thermosets and elastomers. Two types of structure may be obtained, namely intercalated nanocomposites where the polymer chains are sandwiched in between silicate layers and exfoliated nanocomposites where the separated, individual silicate layers are more or less uniformly dispersed in the polymer matrix. This new family of materials exhibits enhanced properties at very low filler level, usually inferior to 5 wt.%, such as increased Young’s modulus and storage modulus, increase in thermal stability and gas barrier properties and good flame retardancy.

Diamond-like amorphous carbon

Abstract: Diamond-like carbon (DLC) is a metastable form of amorphous carbon with significant sp3 bonding. DLC is a semiconductor with a high mechanical hardness, chemical inertness, and optical transparency. This review will describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of DLCs. The films have widespread applications as protective coatings in areas, such as magnetic storage disks, optical windows and micro-electromechanical devices (MEMs).

Bulk metallic glasses

Abstract: Amorphous alloys were first developed over 40 years ago and found applications as magnetic core or reinforcement added to other materials. The scope of applications is limited due to the small thickness in the region of only tens of microns. The research effort in the past two decades, mainly pioneered by a Japanese- and a US-group of scientists, has substantially relaxed this size constrain. Some bulk metallic glasses can have tensile strength up to 3000 MPa with good corrosion resistance, reasonable toughness, low internal friction and good processability. Bulk metallic glasses are now being used in consumer electronic industries, sporting goods industries, etc. In this paper, the authors reviewed the recent development of new alloy systems of bulk metallic glasses. The properties and processing technologies relevant to the industrial applications of these alloys are also discussed here. The behaviors of bulk metallic glasses under extreme conditions such as high pressure and low temperature are especially addressed in this review. In order that the scope of applications can be broadened, the understanding of the glass-forming criteria is important for the design of new alloy systems and also the processing techniques.

Surface modification of titanium, titanium alloys, and related materials for biomedical applications

Abstract: Titanium and titanium alloys are widely used in biomedical devices and components, especially as hard tissue replacements as well as in cardiac and cardiovascular applications, because of their desirable properties, such as relatively low modulus, good fatigue strength, formability, machinability, corrosion resistance, and biocompatibility. However, titanium and its alloys cannot meet all of the clinical requirements. Therefore, in order to improve the biological, chemical, and mechanical properties, surface modification is often performed. This article reviews the various surface modification technologies pertaining to titanium and titanium alloys including mechanical treatment, thermal spraying, sol–gel, chemical and electrochemical treatment, and ion implantation from the perspective of biomedical engineering. Recent work has shown that the wear resistance, corrosion resistance, and biological properties of titanium and titanium alloys can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained. The proper surface treatment expands the use of titanium and titanium alloys in the biomedical fields. Some of the recent applications are also discussed in this paper.

Dispersion and alignment of carbon nanotubes in polymer matrix: A review

Abstract: Polymer/carbon nanotube (CNT) composites are expected to have good processability characteristics of the polymer and excellent functional properties of the CNTs. The critical challenge, however, is how to enhance dispersion and alignment of CNTs in the matrix. Here, we review recent progress and advances that have been made on: (a) dispersion of CNTs in a polymer matrix, including optimum blending, in situ polymerization and chemical functionalization; and (b) alignment of CNTs in the matrix enhanced by ex situ techniques, force and magnetic fields, electrospinning and liquid crystalline phase-induced methods. In addition, discussions on mechanical, thermal, electrical, electrochemical, optical and super-hydrophobic properties; and applications of polymer/CNT composites are included. Enhanced dispersion and alignment of CNTs in the polymer matrix will promote and extend the applications and developments of polymer/CNT nanocomposites.