scispace - formally typeset
Search or ask a question
JournalISSN: 0927-796X

Materials Science & Engineering R-reports 

Elsevier BV
About: Materials Science & Engineering R-reports is an academic journal. The journal publishes majorly in the area(s): Semiconductor & Wafer. Over the lifetime, 389 publications have been published receiving 103581 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, a review of polymer-layered silicate nanocomposites is presented, where the polymer chains are sandwiched in between silicate layers and exfoliated layers are more or less uniformly dispersed in the polymer matrix.
Abstract: This review aims at reporting on very recent developments in syntheses, properties and (future) applications of polymer-layered silicate nanocomposites. This new type of materials, based on smectite clays usually rendered hydrophobic through ionic exchange of the sodium interlayer cation with an onium cation, may be prepared via various synthetic routes comprising exfoliation adsorption, in situ intercalative polymerization and melt intercalation. The whole range of polymer matrices is covered, i.e. thermoplastics, thermosets and elastomers. Two types of structure may be obtained, namely intercalated nanocomposites where the polymer chains are sandwiched in between silicate layers and exfoliated nanocomposites where the separated, individual silicate layers are more or less uniformly dispersed in the polymer matrix. This new family of materials exhibits enhanced properties at very low filler level, usually inferior to 5 wt.%, such as increased Young’s modulus and storage modulus, increase in thermal stability and gas barrier properties and good flame retardancy.

5,901 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of diamond-like carbon.
Abstract: Diamond-like carbon (DLC) is a metastable form of amorphous carbon with significant sp3 bonding. DLC is a semiconductor with a high mechanical hardness, chemical inertness, and optical transparency. This review will describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of DLCs. The films have widespread applications as protective coatings in areas, such as magnetic storage disks, optical windows and micro-electromechanical devices (MEMs).

5,400 citations

Journal ArticleDOI
TL;DR: In this article, the authors reviewed the recent development of new alloy systems of bulk metallic glasses and the properties and processing technologies relevant to the industrial applications of these alloys are also discussed.
Abstract: Amorphous alloys were first developed over 40 years ago and found applications as magnetic core or reinforcement added to other materials. The scope of applications is limited due to the small thickness in the region of only tens of microns. The research effort in the past two decades, mainly pioneered by a Japanese- and a US-group of scientists, has substantially relaxed this size constrain. Some bulk metallic glasses can have tensile strength up to 3000 MPa with good corrosion resistance, reasonable toughness, low internal friction and good processability. Bulk metallic glasses are now being used in consumer electronic industries, sporting goods industries, etc. In this paper, the authors reviewed the recent development of new alloy systems of bulk metallic glasses. The properties and processing technologies relevant to the industrial applications of these alloys are also discussed here. The behaviors of bulk metallic glasses under extreme conditions such as high pressure and low temperature are especially addressed in this review. In order that the scope of applications can be broadened, the understanding of the glass-forming criteria is important for the design of new alloy systems and also the processing techniques.

3,089 citations

Journal ArticleDOI
TL;DR: A review of surface modification techniques for titanium and titanium alloys can be found in this article, where the authors have shown that the wear resistance, corrosion resistance, and biological properties can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained.
Abstract: Titanium and titanium alloys are widely used in biomedical devices and components, especially as hard tissue replacements as well as in cardiac and cardiovascular applications, because of their desirable properties, such as relatively low modulus, good fatigue strength, formability, machinability, corrosion resistance, and biocompatibility. However, titanium and its alloys cannot meet all of the clinical requirements. Therefore, in order to improve the biological, chemical, and mechanical properties, surface modification is often performed. This article reviews the various surface modification technologies pertaining to titanium and titanium alloys including mechanical treatment, thermal spraying, sol–gel, chemical and electrochemical treatment, and ion implantation from the perspective of biomedical engineering. Recent work has shown that the wear resistance, corrosion resistance, and biological properties of titanium and titanium alloys can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained. The proper surface treatment expands the use of titanium and titanium alloys in the biomedical fields. Some of the recent applications are also discussed in this paper.

3,019 citations

Journal ArticleDOI
Shi Ye1, F. Xiao1, Y.X. Pan1, Y. Y. Ma1, Qi Zhang1 
TL;DR: In this article, the most recent advances in the synthesis and application of phosphors for white light-emitting diodes (pc-WLEDs) with emphasis specifically on: (a) principles to tune the excitation and emission spectra of the phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-W LEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions
Abstract: Phosphor-converted white light-emitting diodes (pc-WLEDs) are emerging as an indispensable solid-state light source for the next generation lighting industry and display systems due to their unique properties including but not limited to energy savings, environment-friendliness, small volume, and long persistence. Until now, major challenges in pc-WLEDs have been to achieve high luminous efficacy, high chromatic stability, brilliant color-rending properties, and price competitiveness against fluorescent lamps, which rely critically on the phosphor properties. A comprehensive understanding of the nature and limitations of phosphors and the factors dominating the general trends in pc-WLEDs is of fundamental importance for advancing technological applications. This report aims to provide the most recent advances in the synthesis and application of phosphors for pc-WLEDs with emphasis specifically on: (a) principles to tune the excitation and emission spectra of phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-WLEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions (i.e. Ce 3+ and Eu 2+ ), including YAG:Ce, other garnets, non-garnets, sulfides, and (oxy)nitrides; (c) pc-WLEDs with phosphors excited by near ultraviolet LED chips: single-phased white-emitting phosphors (e.g. Eu 2+ –Mn 2+ activated phosphors), red-green-blue phosphors, energy transfer, and mechanisms involved; and (d) new clues for designing novel high-performance phosphors for pc-WLEDs based on available LED chips. Emphasis shall also be placed on the relationships among crystal structure, luminescence properties, and device performances. In addition, applications, challenges and future advances of pc-WLEDs will be discussed.

1,860 citations

Network Information
Related Journals (5)
Advanced Materials
27.1K papers, 3.2M citations
86% related
Applied Physics Letters
130.8K papers, 5.5M citations
85% related
Advanced Functional Materials
20.8K papers, 1.4M citations
85% related
ACS Applied Materials & Interfaces
49.4K papers, 2M citations
84% related
Journal of Materials Chemistry
38.5K papers, 1.9M citations
83% related
Performance
Metrics
No. of papers from the Journal in previous years
YearPapers
20221
202135
202026
201916
201812
201712