Showing papers in "Nano Letters in 2015"

Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut

Abstract: Metal halides perovskites, such as hybrid organic–inorganic CH3NH3PbI3, are newcomer optoelectronic materials that have attracted enormous attention as solution-deposited absorbing layers in solar cells with power conversion efficiencies reaching 20%. Herein we demonstrate a new avenue for halide perovskites by designing highly luminescent perovskite-based colloidal quantum dot materials. We have synthesized monodisperse colloidal nanocubes (4–15 nm edge lengths) of fully inorganic cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I or mixed halide systems Cl/Br and Br/I) using inexpensive commercial precursors. Through compositional modulations and quantum size-effects, the bandgap energies and emission spectra are readily tunable over the entire visible spectral region of 410–700 nm. The photoluminescence of CsPbX3 nanocrystals is characterized by narrow emission line-widths of 12–42 nm, wide color gamut covering up to 140% of the NTSC color standard, high quantum yields of up to 90%, and radiativ...

Fast Anion-Exchange in Highly Luminescent Nanocrystals of Cesium Lead Halide Perovskites (CsPbX3, X = Cl, Br, I)

Abstract: Postsynthetic chemical transformations of colloidal nanocrystals, such as ion-exchange reactions, provide an avenue to compositional fine-tuning or to otherwise inaccessible materials and morphologies. While cation-exchange is facile and commonplace, anion-exchange reactions have not received substantial deployment. Here we report fast, low-temperature, deliberately partial, or complete anion-exchange in highly luminescent semiconductor nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, I). By adjusting the halide ratios in the colloidal nanocrystal solution, the bright photoluminescence can be tuned over the entire visible spectral region (410–700 nm) while maintaining high quantum yields of 20–80% and narrow emission line widths of 10–40 nm (from blue to red). Furthermore, fast internanocrystal anion-exchange is demonstrated, leading to uniform CsPb(Cl/Br)3 or CsPb(Br/I)3 compositions simply by mixing CsPbCl3, CsPbBr3, and CsPbI3 nanocrystals in appropriate ratios.

Hydrothermal Continuous Flow Synthesis and Exfoliation of NiCo Layered Double Hydroxide Nanosheets for Enhanced Oxygen Evolution Catalysis

Abstract: We report the controlled synthesis of NiCo layered double hydroxide (LDH) nanoplates using a newly developed high temperature high pressure hydrothermal continuous flow reactor (HCFR), which enables direct growth onto conductive substrates in high yield and, most importantly, better control of the precursor supersaturation and, thus, nanostructure morphology and size. The solution coordination chemistry of metal–ammonia complexes was utilized to synthesize well-defined NiCo LDH nanoplates directly in a single step without topochemical oxidation. The as-grown NiCo LDH nanoplates exhibit a high catalytic activity toward the oxygen evolution reaction (OER). By chemically exfoliating LDH nanoplates to thinner nanosheets, the catalytic activity can be further enhanced to yield an electrocatalytic current density of 10 mA cm–2 at an overpotential of 367 mV and a Tafel slope of 40 mV dec–1. Such enhancement could be due to the increased surface area and more exposed active sites. X-ray photoelectron spectroscopy...

Potassium Ion Batteries with Graphitic Materials

Abstract: Graphite intercalation compounds (GICs) have attracted tremendous attention due to their exceptional properties that can be finely tuned by controlling the intercalation species and concentrations. Here, we report for the first time that potassium (K) ions can electrochemically intercalate into graphitic materials, such as graphite and reduced graphene oxide (RGO) at ambient temperature and pressure. Our experiments reveal that graphite can deliver a reversible capacity of 207 mAh/g. Combining experiments with ab initio calculations, we propose a three-step staging process during the intercalation of K ions into graphite: C → KC24 (Stage III) → KC16 (Stage II) → KC8 (Stage I). Moreover, we find that K ions can also intercalate into RGO film with even higher reversible capacity (222 mAh/g). We also show that K ions intercalation can effectively increase the optical transparence of the RGO film from 29.0% to 84.3%. First-principles calculations suggest that this trend is attributed to a decreased absorbance...

Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries

Abstract: Although the rechargeable lithium–sulfur battery system has attracted significant attention due to its high theoretical specific energy, its implementation has been impeded by multiple challenges, especially the dissolution of intermediate lithium polysulfide (Li2Sn) species into the electrolyte. Introducing anchoring materials, which can induce strong binding interaction with Li2Sn species, has been demonstrated as an effective way to overcome this problem and achieve long-term cycling stability and high-rate performance. The interaction between Li2Sn species and anchoring materials should be studied at the atomic level in order to understand the mechanism behind the anchoring effect and to identify ideal anchoring materials to further improve the performance of Li–S batteries. Using first-principles approach with van der Waals interaction included, we systematically investigate the adsorption of Li2Sn species on various two-dimensional layered materials (oxides, sulfides, and chlorides) and study the de...

Quantum Size Effect in Organometal Halide Perovskite Nanoplatelets

Abstract: Organometal halide perovskites have recently emerged displaying a huge potential for not only photovoltaic, but also light emitting applications. Exploiting the optical properties of specifically tailored perovskite nanocrystals could greatly enhance the efficiency and functionality of applications based on this material. In this study, we investigate the quantum size effect in colloidal organometal halide perovskite nanoplatelets. By tuning the ratio of the organic cations used, we can control the thickness and consequently the photoluminescence emission of the platelets. Quantum mechanical calculations match well with the experimental values. We find that not only do the properties of the perovskite, but also those of the organic ligands play an important role. Stacking of nanoplatelets leads to the formation of minibands, further shifting the bandgap energies. In addition, we find a large exciton binding energy of up to several hundreds of meV for nanoplatelets thinner than three unit cells, partially ...

Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers

Abstract: Solid-state electrolytes provide substantial improvements to safety and electrochemical stability in lithium-ion batteries when compared with conventional liquid electrolytes, which makes them a promising alternative technology for next-generation high-energy batteries. Currently, the low mobility of lithium ions in solid electrolytes limits their practical application. The ongoing research over the past few decades on dispersing of ceramic nanoparticles into polymer matrix has been proved effective to enhance ionic conductivity although it is challenging to form the efficiency networks of ionic conduction with nanoparticles. In this work, we first report that ceramic nanowire fillers can facilitate formation of such ionic conduction networks in polymer-based solid electrolyte to enhance its ionic conductivity by three orders of magnitude. Polyacrylonitrile-LiClO4 incorporated with 15 wt % Li0.33La0.557TiO3 nanowire composite electrolyte exhibits an unprecedented ionic conductivity of 2.4 × 10–4 S cm–1 at...

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in a Dielectric Polymer Matrix

Abstract: Electroluminescence in light-emitting devices relies on the encounter and radiative recombination of electrons and holes in the emissive layer. In organometal halide perovskite light-emitting diodes, poor film formation creates electrical shunting paths, where injected charge carriers bypass the perovskite emitter, leading to a loss in electroluminescence yield. Here, we report a solution-processing method to block electrical shunts and thereby enhance electroluminescence quantum efficiency in perovskite devices. In this method, a blend of perovskite and a polyimide precursor dielectric (PIP) is solution-deposited to form perovskite nanocrystals in a thin-film matrix of PIP. The PIP forms a pinhole-free charge-blocking layer, while still allowing the embedded perovskite crystals to form electrical contact with the electron- and hole-injection layers. This modified structure reduces nonradiative current losses and improves quantum efficiency by 2 orders of magnitude, giving an external quantum efficiency o...

Ultrafast and directional diffusion of lithium in phosphorene for high-performance lithium-ion battery.

Abstract: Density functional theory calculations have been performed to investigate the binding and diffusion behavior of Li in phosphorene. Our studies reveal the following findings: (1) Li atom forms strong binding with phosphorus atoms and exists in the cationic state; (2) the shallow energy barrier (0.08 eV) of Li diffusion on monolayer phosphorene along zigzag direction leads to an ultrahigh diffusivity, which is estimated to be 102 (104) times faster than that on MoS2 (graphene) at room temperature; (3) the large energy barrier (0.68 eV) along armchair direction results in a nearly forbidden diffusion, and such strong diffusion anisotropy is absent in graphene and MoS2; (4) a remarkably large average voltage of 2.9 V is predicted in the phosphorene-based Li-ion battery; and (5) a semiconducting to metallic transition induced by Li intercalation of phosphorene gives rise to a good electrical conductivity, ideal for use as an electrode. Given these advantages, it is expected that phosphorene will present abunda...

New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon.

Abstract: Nongraphitizable carbon, also known as hard carbon, is considered one of the most promising anodes for the emerging Na-ion batteries. The current mechanistic understanding of Na-ion storage in hard carbon is based on the “card-house” model first raised in the early 2000s. This model describes that Na-ion insertion occurs first through intercalation between graphene sheets in turbostratic nanodomains, followed by Na filling of the pores in the carbon structure. We tried to test this model by tuning the sizes of turbostratic nanodomains but revealed a correlation between the structural defects and Na-ion storage. Based on our experimental data, we propose an alternative perspective for sodiation of hard carbon that consists of Na-ion storage at defect sites, by intercalation and last via pore-filling.

Exciton Radiative Lifetimes in Two-Dimensional Transition Metal Dichalcogenides

Abstract: Light emission in two-dimensional (2D) transition metal dichalcogenides (TMDs) changes significantly with the number of layers and stacking sequence. While the electronic structure and optical absorption are well understood in 2D-TMDs, much less is known about exciton dynamics and radiative recombination. Here, we show first-principles calculations of intrinsic exciton radiative lifetimes at low temperature (4 K) and room temperature (300 K) in TMD monolayers with the chemical formula MX2 (X = Mo, W, and X = S, Se), as well as in bilayer and bulk MoS2 and in two MX2 heterobilayers. Our results elucidate the time scale and microscopic origin of light emission in TMDs. We find radiative lifetimes of a few picoseconds at low temperature and a few nanoseconds at room temperature in the monolayers and slower radiative recombination in bulk and bilayer than in monolayer MoS2. The MoS2/WS2 and MoSe2/WSe2 heterobilayers exhibit very long-lived (∼20–30 ns at room temperature) interlayer excitons constituted by ele...

Fast and Efficient Preparation of Exfoliated 2H MoS2 Nanosheets by Sonication-Assisted Lithium Intercalation and Infrared Laser-Induced 1T to 2H Phase Reversion

Abstract: Exfoliated 2H molybdenum disulfide (MoS2) has unique properties and potential applications in a wide range of fields, but corresponding studies have been hampered by the lack of effective routes to it in bulk quantities. This study presents a rapid and efficient route to obtain exfoliated 2H MoS2, which combines fast sonication-assisted lithium intercalation and infrared (IR) laser-induced phase reversion. We found that the complete lithium intercalation of MoS2 with butyllithium could be effected within 1.5 h with the aid of sonication. The 2H to 1T phase transition that occurs during the lithium intercalation could be also reversed by IR laser irradiation with a DVD optical drive.

High-Efficiency All-Dielectric Metasurfaces for Ultracompact Beam Manipulation in Transmission Mode

Abstract: Metasurfaces are two-dimensional structures enabling complete control on light amplitude, phase, and polarization. Unlike plasmonic metasurfaces, silicon structures facilitate high transmission, low losses, and compatibility with existing semiconductor technologies. We experimentally demonstrate two examples of high-efficiency polarization-sensitive dielectric metasurfaces with 2π phase control in transmission mode (45% transmission efficiency for the vortex converter and 36% transmission efficiency for the beam steering device) at telecommunication wavelengths. Silicon metasurfaces are poised to enable a versatile platform for the realization of all-optical circuitry on a chip.

Monolayer PtSe2, a New Semiconducting Transition-Metal-Dichalcogenide, Epitaxially Grown by Direct Selenization of Pt

Abstract: Single-layer transition-metal dichalcogenides (TMDs) receive significant attention due to their intriguing physical properties for both fundamental research and potential applications in electronics, optoelectronics, spintronics, catalysis, and so on. Here, we demonstrate the epitaxial growth of high-quality single-crystal, monolayer platinum diselenide (PtSe2), a new member of the layered TMDs family, by a single step of direct selenization of a Pt(111) substrate. A combination of atomic-resolution experimental characterizations and first-principle theoretic calculations reveals the atomic structure of the monolayer PtSe2/Pt(111). Angle-resolved photoemission spectroscopy measurements confirm for the first time the semiconducting electronic structure of monolayer PtSe2 (in contrast to its semimetallic bulk counterpart). The photocatalytic activity of monolayer PtSe2 film is evaluated by a methylene-blue photodegradation experiment, demonstrating its practical application as a promising photocatalyst. Mor...

Continuous germanene layer on Al(111).

Abstract: Germanene, a 2D honeycomb structure similar to silicene, has been fabricated on Al(111). The 2D germanene layer covers uniformly the substrate with a large coherence over the Al(111) surface atomic plane. It is characterized by a (3 × 3) superstructure with respect to the substrate lattice, shown by low energy electron diffraction and scanning tunnelling microscopy. First-principles calculations indicate that the Ge atoms accommodate in a very regular atomic configuration with a buckled conformation.

Nonlinear Fano-Resonant Dielectric Metasurfaces.

Abstract: Strong nonlinear light–matter interaction is highly sought-after for a variety of applications including lasing and all-optical light modulation. Recently, resonant plasmonic structures have been considered promising candidates for enhancing nonlinear optical processes due to their ability to greatly enhance the optical near-field; however, their small mode volumes prevent the inherently large nonlinear susceptibility of the metal from being efficiently exploited. Here, we present an alternative approach that utilizes a Fano-resonant silicon metasurface. The metasurface results in strong near-field enhancement within the volume of the silicon resonator while minimizing two photon absorption. We measure a third harmonic generation enhancement factor of 1.5 × 105 with respect to an unpatterned silicon film and an absolute conversion efficiency of 1.2 × 10–6 with a peak pump intensity of 3.2 GW cm–2. The enhanced nonlinearity, combined with a sharp linear transmittance spectrum, results in transmission modul...

Highly Sensitive, Encapsulated MoS2 Photodetector with Gate Controllable Gain and Speed.

Abstract: Semiconducting, two-dimensional molybdenum disulfide (MoS2) is considered a promising new material for highly sensitive photodetection, because of its atomically thin profile and favorable bandgap. However, reported photodetectors to date show strong variation in performance due to the detrimental and uncontrollable effects of environmental adsorbates on devices due to large surface to volume ratio. Here, we report on highly stable and high-performance monolayer and bilayer MoS2 photodetectors encapsulated with atomic layer deposited hafnium oxide. The protected devices show enhanced electronic properties by isolating them from the ambience as strong n-type doping, vanishing hysteresis, and reduced device resistance. By controlling the gate voltage the responsivity and temporal response can be tuned by several orders of magnitude with R ∼ 10-10(4) A/W and t ∼ 10 ms to 10 s. At strong negative gate voltage, the detector is operated at higher speed and simultaneously exhibits a low-bound, record sensitivity of D* ≥ 7.7 × 10(11) Jones. Our results lead the way for future application of ultrathin, flexible, and high-performance MoS2 detectors and prompt for further investigation in encapsulated transition metal dichalcogenide optoelectronics.

Highly Sensitive and Stretchable Multidimensional Strain Sensor with Prestrained Anisotropic Metal Nanowire Percolation Networks

Abstract: To overcome the limitation of the conventional single axis-strain sensor, we demonstrate a multidimensional strain sensor composed of two layers of prestrained silver nanowire percolation network with decoupled and polarized electrical response in principal and perpendicular directional strain. The information on strain vector is successfully measured up to 35% maximum strain with large gauge factor (>20). The potential of the proposed sensor as a versatile wearable device has been further confirmed.

CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%.

Abstract: Although inorganic hole-transport materials usually possess high chemical stability, hole mobility, and low cost, the efficiency of most of inorganic hole conductor-based perovskite solar cells is still much lower than that of the traditional organic hole conductor-based cells. Here, we have successfully fabricated high quality CH3NH3PbI3 films on top of a CuSCN layer by utilizing a one-step fast deposition-crystallization method, which have lower surface roughness and smaller interface contact resistance between the perovskite layer and the selective contacts in comparison with the films prepared by a conventional two-step sequential deposition process. The average efficiency of the CuSCN-based inverted planar CH3NH3PbI3 solar cells has been improved to 15.6% with a highest PCE of 16.6%, which is comparable to that of the traditional organic hole conductor-based cells, and may promote wider application of the inexpensive inorganic materials in perovskite solar cells.

Ultrafast Dynamics of Defect-Assisted Electron–Hole Recombination in Monolayer MoS2

Abstract: In this Letter, we present nondegenerate ultrafast optical pump–probe studies of the carrier recombination dynamics in MoS2 monolayers. By tuning the probe to wavelengths much longer than the exciton line, we make the probe transmission sensitive to the total population of photoexcited electrons and holes. Our measurement reveals two distinct time scales over which the photoexcited electrons and holes recombine; a fast time scale that lasts ∼2 ps and a slow time scale that lasts longer than ∼100 ps. The temperature and the pump fluence dependence of the observed carrier dynamics are consistent with defect-assisted recombination as being the dominant mechanism for electron–hole recombination in which the electrons and holes are captured by defects via Auger processes. Strong Coulomb interactions in two-dimensional atomic materials, together with strong electron and hole correlations in two-dimensional metal dichalcogenides, make Auger processes particularly effective for carrier capture by defects. We pres...

Graphene Quantum Dots Coated VO2 Arrays for Highly Durable Electrodes for Li and Na Ion Batteries

Abstract: Nanoscale surface engineering is playing important role in enhancing the performance of battery electrode. VO2 is one of high-capacity but less-stable materials and has been used mostly in the form of powders for Li-ion battery cathode with mediocre performance. In this work, we design a new type of binder-free cathode by bottom-up growth of biface VO2 arrays directly on a graphene network for both high-performance Li-ion and Na-ion battery cathodes. More importantly, graphene quantum dots (GQDs) are coated onto the VO2 surfaces as a highly efficient surface “sensitizer” and protection to further boost the electrochemical properties. The integrated electrodes deliver a Na storage capacity of 306 mAh/g at 100 mA/g, and a capacity of more than 110 mAh/g after 1500 cycles at 18 A/g. Our result on Na-ion battery may pave the way to next generation postlithium batteries.

Scalable exfoliation process for highly soluble boron nitride nanoplatelets by hydroxide-assisted ball milling

Abstract: The scalable preparation of two-dimensional hexagonal boron nitride (h-BN) is essential for practical applications. Despite intense research in this area, high-yield production of two-dimensional h-BN with large-size and high solubility remains a key challenge. In the present work, we propose a scalable exfoliation process for hydroxyl-functionalized BN nanoplatelets (OH-BNNPs) by a simple ball milling of BN powders in the presence of sodium hydroxide via the synergetic effect of chemical peeling and mechanical shear forces. The hydroxide-assisted ball milling process results in relatively large flakes with an average size of 1.5 μm with little damage to the in-plane structure of the OH-BNNP and high yields of 18%. The resultant OH-BNNP samples can be redispersed in various solvents and form stable dispersions that can be used for multiple purposes. The incorporation of the BNNPs into the polyethylene matrix effectively enhanced the barrier properties of the polyethylene due to increased tortuosity of the diffusion path of the gas molecules. Hydroxide-assisted ball milling process can thus provide simple and efficient approaches to scalable preparation of large-size and highly soluble BNNPs. Moreover, this exfoliation process is not only easily scalable but also applicable to other layered materials.

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes

Abstract: Lithium metal is one of the most promising candidates as an anode material for next-generation energy storage systems due to its highest specific capacity (3860 mAh/g) and lowest redox potential of all. The uncontrolled lithium dendrite growth that causes a poor cycling performance and serious safety hazards, however, presents a significant challenge for the realization of lithium metal-based batteries. Here, we demonstrate a novel electrode design by placing a three-dimensional (3D) oxidized polyacrylonitrile nanofiber network on top of the current collector. The polymer fiber with polar surface functional groups could guide the lithium ions to form uniform lithium metal deposits confined on the polymer fiber surface and in the 3D polymer layer. We showed stable cycling of lithium metal anode with an average Coulombic efficiency of 97.4% over 120 cycles in ether-based electrolyte at a current density of 3 mA/cm2 for a total of 1 mAh/cm2 of lithium.

High performance pseudocapacitor based on 2D layered metal chalcogenide nanocrystals

Abstract: Single-layer and few-layer transition metal dichalcogenides have been extensively studied for their electronic properties, but their energy-storage potential has not been well explored. This paper describes the structural and electrochemical properties of few-layer TiS2 nanocrystals. The two-dimensional morphology leads to very different behavior, compared to corresponding bulk materials. Only small structural changes occur during lithiation/delithiation and charge storage characteristics are consistent with intercalation pseudocapacitance, leading to materials that exhibit both high energy and power density.

Two-step growth of two-dimensional WSe2/MoSe2 heterostructures

Abstract: Two dimensional (2D) materials have attracted great attention due to their unique properties and atomic thickness. Although various 2D materials have been successfully synthesized with different optical and electrical properties, a strategy for fabricating 2D heterostructures must be developed in order to construct more complicated devices for practical applications. Here we demonstrate for the first time a two-step chemical vapor deposition (CVD) method for growing transition-metal dichalcogenide (TMD) heterostructures, where MoSe2 was synthesized first and followed by an epitaxial growth of WSe2 on the edge and on the top surface of MoSe2. Compared to previously reported one-step growth methods, this two-step growth has the capability of spatial and size control of each 2D component, leading to much larger (up to 169 μm) heterostructure size, and cross-contamination can be effectively minimized. Furthermore, this two-step growth produces well-defined 2H and 3R stacking in the WSe2/MoSe2 bilayer regions ...

Aluminum Plasmonic Multicolor Meta-Hologram

Abstract: We report a phase-modulated multicolor meta-hologram (MCMH) that is polarization-dependent and capable of producing images in three primary colors. The MCMH structure is made of aluminum nanorods that are arranged in a two-dimensional array of pixels with surface plasmon resonances in red, green, and blue. The aluminum nanorod array is patterned on a 30 nm thick SiO2 spacer layer sputtered on top of a 130 nm thick aluminum mirror. With proper design of the structure, we obtain resonances of narrow bandwidths to allow for implementation of the multicolor scheme. Taking into account of the wavelength dependence of the diffraction angle, we can project images to specific locations with predetermined size and order. With tuning of aluminum nanorod size, we demonstrate that the image color can be continuously varied across the visible spectrum.

Three-Dimensional Crystalline/Amorphous Co/Co3O4 Core/Shell Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

Abstract: Earth-abundant, low-cost electrocatalysts with outstanding catalytic activity in the electrochemical hydrogen evolution reaction (HER) are critical in realizing the hydrogen economy to lift our future welfare and civilization. Here we report that excellent HER activity has been achieved with three-dimensional core/shell Co/Co3O4 nanosheets composed of a metallic cobalt core and an amorphous cobalt oxide shell. A benchmark HER current density of 10 mA cm(-2) has been achieved at an overpotential of ∼90 mV in 1 M KOH. The excellent activity is enabled with the unique metal/oxide core/shell structure, which allows high electrical conductivity in the core and high catalytic activity on the shell. This finding may open a door to the design and fabrication of earth-abundant, low-cost metal oxide electrocatalysts with satisfactory hydrogen evolution reaction activities.

Phagraphene: A Low-Energy Graphene Allotrope Composed of 5-6-7 Carbon Rings with Distorted Dirac Cones.

Abstract: Using systematic evolutionary structure searching we propose a new carbon allotrope, phagraphene [fae'graefi:n], standing for penta-hexa-hepta-graphene, because the structure is composed of 5-6-7 carbon rings. This two-dimensional (2D) carbon structure is lower in energy than most of the predicted 2D carbon allotropes due to its sp(2)-binding features and density of atomic packing comparable to graphene. More interestingly, the electronic structure of phagraphene has distorted Dirac cones. The direction-dependent cones are further proved to be robust against external strain with tunable Fermi velocities.

Experimental demonstration of a second-order memristor and its ability to biorealistically implement synaptic plasticity.

Abstract: Memristors have been extensively studied for data storage and low-power computation applications. In this study, we show that memristors offer more than simple resistance change. Specifically, the dynamic evolutions of internal state variables allow an oxide-based memristor to exhibit Ca2+-like dynamics that natively encode timing information and regulate synaptic weights. Such a device can be modeled as a second-order memristor and allow the implementation of critical synaptic functions realistically using simple spike forms based solely on spike activity.

Blue-Green Color Tunable Solution Processable Organolead Chloride-Bromide Mixed Halide Perovskites for Optoelectronic Applications

Abstract: Solution-processed organo-lead halide perovskites are produced with sharp, color-pure electroluminescence that can be tuned from blue to green region of visible spectrum (425–570 nm). This was accomplished by controlling the halide composition of CH3NH3Pb(BrxCl1–x)3 [0 ≤ x ≤ 1] perovskites. The bandgap and lattice parameters change monotonically with composition. The films possess remarkably sharp band edges and a clean bandgap, with a single optically active phase. These chloride–bromide perovskites can potentially be used in optoelectronic devices like solar cells and light emitting diodes (LEDs). Here we demonstrate high color-purity, tunable LEDs with narrow emission full width at half maxima (FWHM) and low turn on voltages using thin-films of these perovskite materials, including a blue CH3NH3PbCl3 perovskite LED with a narrow emission FWHM of 5 nm.