Showing papers in "Photonics in 2017"
TL;DR: In this article, a two-layer circular lattice photonic crystal fiber (PCF) biosensor based on the principle of surface plasmon resonance (SPR) was numerically demonstrated.
Abstract: In this paper, we numerically demonstrate a two-layer circular lattice photonic crystal fiber (PCF) biosensor based on the principle of surface plasmon resonance (SPR). The finite element method (FEM) with circular perfectly matched layer (PML) boundary condition is applied to evaluate the performance of the proposed sensor. A thin gold layer is deposited outside the PCF structure, which acts as the plasmonic material for this design. The sensing layer (analyte) is implemented in the outermost layer, which permits easy and more practical fabrication process compared to analyte is put inside the air holes. It is demonstrated that, at gold layer thickness of 40 nm, the proposed sensor shows maximum sensitivity of 2200 nm/RIU using the wavelength interrogation method in the sensing range between 1.33–1.36. Besides, using an amplitude interrogation method, a maximum sensitivity of 266 RIU−1 and a maximum sensor resolution of 3.75 × 10−5 RIU are obtained. We also discuss how phase matching points are varied with different fiber parameters. Owing to high sensitivity and simple design, the proposed sensor may find important applications in biochemical and biological analyte detection.
126 citations
TL;DR: In this paper, the performance of Airyscan as compared to confocal microscopy was evaluated by imaging a variety of reference samples and biological specimens with different acquisition and processing parameters. And the results showed that the processed airyscan images at default deconvolution settings have a spatial resolution similar to that of conventional confocal imaging with a pinhole setting of 0.2 Airy Units, but with a significantly improved signal-to-noise-ratio.
Abstract: Biological research increasingly demands the use of non-invasive and ultra-sensitive imaging techniques. The Airyscan technology was recently developed to bridge the gap between conventional confocal and super-resolution microscopy. This technique combines confocal imaging with a 0.2 Airy Unit pinhole, deconvolution and the pixel-reassignment principle in order to enhance both the spatial resolution and signal-to-noise-ratio without increasing the excitation power and acquisition time. Here, we present a detailed study evaluating the performance of Airyscan as compared to confocal microscopy by imaging a variety of reference samples and biological specimens with different acquisition and processing parameters. We found that the processed Airyscan images at default deconvolution settings have a spatial resolution similar to that of conventional confocal imaging with a pinhole setting of 0.2 Airy Units, but with a significantly improved signal-to-noise-ratio. Further gains in the spatial resolution could be achieved by the use of enhanced deconvolution filter settings, but at a steady loss in the signal-to-noise ratio, which at more extreme settings resulted in significant data loss and image distortion.
67 citations
TL;DR: In this paper, the authors review asec pulses generated by the interaction of gas phase media and solid surfaces with intense femtosecond (fs) IR laser fields and review the current technology, specifications and the ongoing developments of such asec sources.
Abstract: Real-time observation of ultrafast dynamics in the microcosm is a fundamental approach for understanding the internal evolution of physical, chemical and biological systems. Tools for tracing such dynamics are flashes of light with duration comparable to or shorter than the characteristic evolution times of the system under investigation. While femtosecond (fs) pulses are successfully used to investigate vibrational dynamics in molecular systems, real time observation of electron motion in all states of matter requires temporal resolution in the attosecond (1 attosecond (asec) = 10−18 s) time scale. During the last decades, continuous efforts in ultra-short pulse engineering led to the development of table-top sources which can produce asec pulses. These pulses have been synthesized by using broadband coherent radiation in the extreme ultraviolet (XUV) spectral region generated by the interaction of matter with intense fs pulses. Here, we will review asec pulses generated by the interaction of gas phase media and solid surfaces with intense fs IR laser fields. After a brief overview of the fundamental process underlying the XUV emission form these media, we will review the current technology, specifications and the ongoing developments of such asec sources.
57 citations
TL;DR: This work presents the first study, to the authors' knowledge, of the possible application of a small pixel sized SLM as a switching component in a WSS system.
Abstract: The Liquid-Crystal on Silicon (LCoS) spatial light modulator (SLM) has been used in wavelength selective switch (WSS) systems since the 1990s. However, most of the LCoS devices used for WSS systems have a pixel size larger than 6 µm. Although there are some negative physical effects related to smaller pixel sizes, the benefits of more available ports, larger spatial bandwidth, improved resolution, and the compactness of the whole system make the latest generation LCoS microdisplays highly appealing as the core component in WSS systems. In this review work, three specifications of the WSS system including response time, crosstalk and insertion loss, and optimization directions are discussed. With respect to response time, the achievements of liquid crystal material are briefly surveyed. For the study of crosstalk and insertion loss, related physical effects and their relation to the crosstalk or insertion loss are discussed in detail, preliminary experimental study for these physical effects based on a small pixel LCoS SLM device (GAEA device, provided by Holoeye, 3.74 µm pixel pitch, 10 megapixel resolution, telecom) is first performed, which helps with predicting and optimizing the performance of a WSS system with a small pixel size SLM. In the last part, the trend of LCoS devices for future WSS modules is discussed based on the performance of the GAEA device. Tradeoffs between multiple factors are illustrated. In this work, we present the first study, to our knowledge, of the possible application of a small pixel sized SLM as a switching component in a WSS system.
53 citations
TL;DR: In this paper, the authors review the recent studies in the subject, and collect the major prospects of this emerging field and also focus on the unique and promising applications of ultrashort XUV/X-ray vortex pulses.
Abstract: Vortex light beams are structures of the electromagnetic field with a spiral phase ramp around a point-phase singularity. These vortices have many applications in the optical regime, ranging from optical trapping and quantum information to spectroscopy and microscopy. The extension of vortices into the extreme-ultraviolet (XUV)/X-ray regime constitutes a significant step forward to bring those applications to the nanometer or even atomic scale. The recent development of a new generation of X-ray sources, and the refinement of other techniques, such as harmonic generation, have boosted the interest of producing vortex beams at short wavelengths. In this manuscript, we review the recent studies in the subject, and we collect the major prospects of this emerging field. We also focus on the unique and promising applications of ultrashort XUV/X-ray vortex pulses.
46 citations
TL;DR: This work describes recent progress in integrated microwave photonics in wideband signal processing applications with a focus on the key signal processing building blocks, the realization of monolithic integration, and cascaded photonic signal processing for analog radio frequency (RF) photonic links.
Abstract: We describe recent progress in integrated microwave photonics in wideband signal processing applications with a focus on the key signal processing building blocks, the realization of monolithic integration, and cascaded photonic signal processing for analog radio frequency (RF) photonic links. New developments in integration-based microwave photonic techniques, that have high potentialities to be used in a variety of sensing applications for enhanced resolution and speed are also presented.
33 citations
TL;DR: A survey of results on polymer femtosecond processing, resulting in 3D waveguides, electroluminescent structures and active hybrid-microstructures for luminescence or biological microenvironments is presented in this article.
Abstract: The current demand for fabricating optical and photonic devices displaying high performance, using low-cost and time-saving methods, prompts femtosecond (fs)-laser processing as a promising methodology. High and low repetition femtosecond lasers enable surface and/or bulk modification of distinct materials, which can be used for applications ranging from optical waveguides to superhydrophobic surfaces. Herein, some fundamental aspects of fs-laser processing of materials, as well as the basics of their most common experimental apparatuses, are introduced. A survey of results on polymer fs-laser processing, resulting in 3D waveguides, electroluminescent structures and active hybrid-microstructures for luminescence or biological microenvironments is presented. Similarly, results of fs-laser processing on glasses, gold and silicon to produce waveguides containing metallic nanoparticles, analytical chemical sensors and surface with modified features, respectively, are also described. The complexity of fs-laser micromachining involves precise control of material properties, pushing ultrafast laser processing as an advanced technique for micro/nano devices.
32 citations
TL;DR: The reasons underpinning the presented radical change of paradigm are described and the most significant solutions proposed in literature are summarized, with a specific emphasis to physical-layer reconfigurable networks and a focus on both architectures and devices.
Abstract: In recent years, architectures, devices, and components in telecommunication networks have been challenged by evolutionary and revolutionary factors which are drastically changing the traffic features. Most of these changes imply the need for major re-configurability and programmability not only in data-centers and core networks, but also in the metro-access segment. In a wide variety of contexts, this necessity has been addressed by the proposed introduction of the innovative paradigm of software-defined networks (SDNs). Several solutions inspired by the SDN model have been recently proposed also for metro and access networks, where the adoption of a new generation of software-defined reconfigurable integrated photonic devices is highly desirable. In this paper, we review the possible future application scenarios for software-defined metro and access networks and software-defined photonics (SDP), on the base of analytics, statistics, and surveys. This work describes the reasons underpinning the presented radical change of paradigm and summarizes the most significant solutions proposed in literature, with a specific emphasis to physical-layer reconfigurable networks and a focus on both architectures and devices.
30 citations
TL;DR: In this article, a folded-architecture arrayed-waveguide-grating (AWG) device was designed for the near-infrared astronomy with a theoretical maximum resolving power R = 60,000 at 1630 nm.
Abstract: A comprehensive design of a folded-architecture arrayed-waveguide-grating (AWG)-device, targeted at applications as integrated photonic spectrographs (IPS) in near-infrared astronomy, is presented. The AWG structure is designed for the astronomical H-band (1500 nm–1800 nm) with a theoretical maximum resolving power R = 60,000 at 1630 nm. The geometry of the device is optimized for a compact structure with a footprint of 5.5 cm × 3.93 cm on SiO 2 platform. To evaluate the fabrication challenges of such high-resolution AWGs, effects of random perturbations of the effective refractive index (RI) distribution in the free propagation region (FPR), as well as small variations of the array waveguide optical lengths are numerically investigated. The results of the investigation show a dramatic degradation of the point spread function (PSF) for a random effective RI distribution with variance values above ∼ 10 - 4 for both the FPR and the waveguide array. Based on the results, requirements on the fabrication technology for high-resolution AWG-based spectrographs are given in the end.
30 citations
TL;DR: In this article, the authors discuss the challenges that were facing by multiband microwave photonic filter, then they review recent techniques that have been developed to tackle the challenge and lead to promising developments of tunable microwave photonics multiband filters.
Abstract: The increasing demand for multifunctional devices, the use of cognitive wireless technology to solve the frequency resource shortage problem, as well as the capabilities and operational flexibility necessary to meet ever-changing environment result in an urgent need of multiband wireless communications. Spectral filter is an essential part of any communication systems, and in the case of multiband wireless communications, tunable multiband RF filters are required for channel selection, noise/interference removal, and RF signal processing. Unfortunately, it is difficult for RF electronics to achieve both tunable and multiband spectral filtering. Recent advancements of microwave photonics have proven itself to be a promising candidate to solve various challenges in RF electronics including spectral filtering, however, the development of multiband microwave photonic filtering still faces lots of difficulties, due to the limited scalability and tunability of existing microwave photonic schemes. In this review paper, we first discuss the challenges that were facing by multiband microwave photonic filter, then we review recent techniques that have been developed to tackle the challenge and lead to promising developments of tunable microwave photonic multiband filters. The successful design and implementation of tunable microwave photonic multiband filter facilitate the vision of dynamic multiband wireless communications and radio frequency signal processing for commercial, defense, and civilian applications.
29 citations
TL;DR: In this paper, the expected performance of echo-enabled harmonic generation (EEHG) at the FERMI FEL, using numerical simulations, was investigated. And the results showed that, after substantial machine upgrades, EEHG has the potential to deliver coherent multicolor pulses reaching wavelengths as short as 3 nm, enabling x-ray pump-x-ray probe experiments in the water window.
Abstract: Studying ultrafast processes on the nanoscale with element specificity requires a powerful femtosecond source of tunable extreme-ultraviolet (XUV) or x-ray radiation, such as a free-electron laser (FEL). Current efforts in FEL development are aimed at improving the wavelength tunability and multicolor operation, which will potentially lead to the development of new characterization techniques offering a higher chemical sensitivity and improved spatial resolution. One of the most promising approaches is the echo-enabled harmonic generation (EEHG), where two external seed lasers are used to precisely control the spectro-temporal properties of the FEL pulse. Here, we study the expected performance of EEHG at the FERMI FEL, using numerical simulations. We show that, by employing the existing FERMI layout with minor modifications, the EEHG scheme will be able to produce gigawatt peak-power pulses at wavelengths as short as 5 nm. We discuss some possible detrimental effects that may affect the performance of EEHG and compare the results to the existing double-stage FEL cascade, currently in operation at FERMI. Finally, our simulations show that, after substantial machine upgrades, EEHG has the potential to deliver coherent multicolor pulses reaching wavelengths as short as 3 nm, enabling x-ray pump–x-ray probe experiments in the water window.
TL;DR: In this article, an analytical model of an optical vortex microscope, in which a simple phase object was inserted into the illuminating beam, is presented, where the focused vortex beam interacts with an object and transmits the corresponding information to the detection plane.
Abstract: An analytical model of an optical vortex microscope, in which a simple phase object was inserted into the illuminating beam, is presented. In this microscope, the focused vortex beam interacts with an object and transmits the corresponding information to the detection plane. It was shown that the beam at the detection plane can be separated analytically into two parts: a non-disturbed vortex part and an object beam part. The intensity of the non-disturbed part spreads out over the center; hence, the small disturbance introduced by the object can be detected at the image center. A first procedure for recovering information about the object from this set-up was proposed. The theory was verified experimentally.
TL;DR: In this article, a close analysis of the oxidative stability of the oils obtained from the kernel and pulp of Acrocomia aculeata fruits, evaluating the influence of the intrinsic antioxidants and the fatty acid composition on the oil's thermal stability.
Abstract: Acrocomia aculeata is a palm tree typical of the Brazilian savanna. Oils extracted from the pulp and kernel of Acrocomia aculeata fruits have gained considerable attention mainly due to their nutritional and medicinal features. Despite their potential applications, a detailed analysis of their oxidative stability is still needed. The present study shows a close analysis of the oxidative stability of the oils obtained from the kernel and pulp of Acrocomia aculeata fruits, evaluating the influence of the intrinsic antioxidants and the fatty acid composition on the oil’s thermal stability. A complete characterization of the physical-chemical and optical properties of the oils was performed. The results showed that 66% of the fatty acids present in the pulp oil are unsaturated, while 75% are saturated in the kernel oil. A higher content of intrinsic antioxidants was obtained in the pulp oil, and an induction period (at 110 °C) of 65 and 43 h was determined for the pulp and kernel oil, respectively. Additionally, oil absorption increases due to the formation of degradation products, and a new fluorescent compound was formed during the oil oxidation process at 110 °C. Even though the pulp presented a high content of unsaturated fatty acids, the pulp oil was more stable than the kernel oil due to its higher content of intrinsic antioxidant, especially carotenoids. The results also demonstrated that oil oxidation can be optically determined by analyzing the absorption at 232 and 270 nm, as well as the emission at 424 nm.
TL;DR: In this paper, a method to solve the nonlinear Langevin equations arising from quadratic interactions in quantum mechanics is described, and first and second order truncation perturbation schemes are proposed.
Abstract: A method is described to solve the nonlinear Langevin equations arising from quadratic interactions in quantum mechanics. While the zeroth order linearization approximation to the operators is normally used, here, first and second order truncation perturbation schemes are proposed. These schemes employ higher-order system operators, and then approximate number operators with their corresponding mean boson numbers only where needed. Spectral densities of higher-order operators are derived, and an expression for the second-order correlation function at zero time-delay has been found, which reveals that the cavity photon occupation of an ideal laser at threshold reaches 6 − 2 , in good agreement with extensive numerical calculations. As further applications, analysis of the quantum anharmonic oscillator, calculation of Q-functions, analysis of quantum limited amplifiers, and nondemoliton measurements are provided.
TL;DR: A high sensitivity and high resolution photothermal microscopy with low-cost and compact laser diodes as light sources is developed and the ability for distinguishing or identifying biological molecules with simultaneous muti-wavelength imaging is demonstrated.
Abstract: Photothermal microscopy is useful to visualize the distribution of non-fluorescence chromoproteins in biological specimens. Here, we developed a high sensitivity and high resolution photothermal microscopy with low-cost and compact laser diodes as light sources. A new detection scheme for improving signal to noise ratio more than 4-fold is presented. It is demonstrated that spatial resolution in photothermal microscopy is up to nearly twice as high as that in the conventional widefield microscopy. Furthermore, we demonstrated the ability for distinguishing or identifying biological molecules with simultaneous muti-wavelength imaging. Simultaneous photothermal and fluorescence imaging of mouse brain tissue was conducted to visualize both neurons expressing yellow fluorescent protein and endogenous non-fluorescent chromophores.
TL;DR: A novel digital coherent burst-mode receiver that makes uses of the Stokes parametrization to rapidly estimate the state of polarization (SOP) and optimize the equalizer convergence time is described and experimentally characterized.
Abstract: Optical packet switching (OPS) networks and its subsystems, like the burst-mode receiver, are an essential technology currently used in passive optical networks (PONs). Moreover, OPS may play a fundamental role on future hybrid optical circuit switching (OCS)/OPS networks and datacenter networks. This paper focuses on two fundamental subsystems of packetized optical networks: the digital coherent burst-mode receiver and the electro-optical switch. We describe and experimentally characterize a novel digital coherent burst-mode receiver that makes uses of the Stokes parametrization to rapidly estimate the state of polarization (SOP) and optimize the equalizer convergence time. This burst-mode receiver is suitable for optical packetized networks that make use of advanced modulation formats such as quadrature amplitude modulation (QAM). We study the suitability of (Pb,La)(Zr,La)O3 (PLZT) optical switches for amplitude-variable coherent polarization division multiplexing (PDM) 16QAM modulation format and demonstrate a switching capacity of 10.24 Tb/s/port. We demonstrate a full 2 × 2 OPS node with a control plane capable of solving packet contention by means of packet dropping or buffering with a switching capacity of 10.24 Tb/s/port. Finally, we demonstrate the operation of the 2 × 2 OPS node with a record capacity of 12.8 Tb/s/port plus 100 km of dispersion-compensated fiber transmission.
TL;DR: In this paper, a slit confocal pattern is employed to suppress out-of-focus light before its noise can spoil SIM mathematics, which not only increases tissue penetration considerably, but also provides a better S/N performance and an improved confocality.
Abstract: Of all 3D-super resolution techniques, structured illumination microscopy (SIM) provides the best compromise with respect to resolution, signal-to-noise ratio (S/N), speed and cell viability. Its ability to achieve double resolution in all three dimensions enables resolving 3D-volumes almost 10× smaller than with a normal light microscope. Its major drawback is noise contained in the out-of-focus-signal, which—unlike the out-of-focus signal itself—cannot be removed mathematically. The resulting “noise-pollution” grows bigger the more light is removed, thus rendering thicker biological samples unsuitable for SIM. By using a slit confocal pattern, we employ optical means to suppress out-of-focus light before its noise can spoil SIM mathematics. This not only increases tissue penetration considerably, but also provides a better S/N performance and an improved confocality. The SIM pattern we employ is no line grid, but a two-dimensional hexagonal structure, which makes pattern rotation between image acquisitions obsolete and thus simplifies image acquisition and yields more robust fit parameters for SIM.
TL;DR: In this article, a nonlinear diffuse femtosecond-pulse reflectometry is introduced as a powerful experimental tool for unambiguous characterization of polar and non-polar point symmetry groups of harmonic upconversion nanoparticles.
Abstract: Nonlinear diffuse femtosecond-pulse reflectometry is introduced as a powerful experimental tool for the unambiguous characterization of polar and non-polar point symmetry groups of harmonic upconversion nanoparticles. Using intense ultrashort 40 femtosecond laser pulses and an appropriate figure of merit (FOM), second and third harmonic emission serve for the structural characterization of polar Yb-doped lithium niobate and non-polar titanium dioxide nanoparticles. The tool is capable of differentiating these two samples by FOM values that differ by up to 13 orders of magnitude. The general applicability to harmonic upconversion nanoparticles over a broad range of intensities and wavelength spectrum, is discussed.
TL;DR: In this article, the thermal properties of lattice matched AlInAs/InGaAs/INP quantum cascade lasers were investigated using charge-coupled device CCD thermoreflectance.
Abstract: In this paper, we report on the experimental investigation of the thermal performance of lattice matched AlInAs/InGaAs/InP quantum cascade lasers. Investigated designs include double trench, single mesa, and buried heterostructures, which were grown by combined Molecular Beam Epitaxy (MBE) and Metal Organic Vapor Phase Epitaxy (MOVPE) techniques. The thermal characteristics of lasers are investigated by Charge-Coupled Device CCD thermoreflectance. This method allows for the fast and accurate registration of high-resolution temperature maps of the whole device. We observe different heat dissipation mechanisms for investigated geometries of Quantum Cascade Lasers (QCLs). From the thermal point of view, the preferred design is the buried heterostructure. The buried heterostructures structure and epi-layer down mounting help dissipate the heat generated from active core of the QCL. The experimental results are in very good agreement with theoretical predictions of heat dissipation in various device constructions.
TL;DR: A new microscope integrating super-resolved imaging using structured illumination microscopy (SIM) with wide-field optically sectioned fluorescence lifetime imaging (FLIM) to provide optical mapping of molecular function and its correlation with biological nanostructure below the conventional diffraction limit is presented.
Abstract: We present a new microscope integrating super-resolved imaging using structured illumination microscopy (SIM) with wide-field optically sectioned fluorescence lifetime imaging (FLIM) to provide optical mapping of molecular function and its correlation with biological nanostructure below the conventional diffraction limit. We illustrate this SIM + FLIM capability to map FRET readouts applied to the aggregation of discoidin domain receptor 1 (DDR1) in Cos 7 cells following ligand stimulation and to the compaction of DNA during the cell cycle.
TL;DR: In this paper, the design conditions to be fulfilled by a grating monochromator that does not increase the pulse duration significantly longer than the Fourier limit are discussed. But the grating can be used for the spectral selection of ultrashort pulses without altering the pulse length in a significant way, provided that the number of illuminated grooves is equal to the resolution.
Abstract: The design of grating-based instruments to handle and condition coherent ultrafast pulses in the extreme-ultraviolet is discussed. The main application of such instruments is the monochromatization of high-order laser harmonics and free-electron-laser pulses in the femtosecond time scale. Broad-band monochromators require the use of diffraction gratings at grazing incidence. A grating can be used for the spectral selection of ultrashort pulses without altering the pulse duration in a significant way, provided that the number of illuminated grooves is equal to the resolution. We discuss here the design conditions to be fulfilled by a grating monochromator that does not increase the pulse duration significantly longer than the Fourier limit.
TL;DR: In this paper, the authors explored light-trapping enhancement in newly discovered graded photonic super-crystals (GPSCs) with dual periodicity and dual basis for the first time.
Abstract: Light-trapping enhancement in newly discovered graded photonic super-crystals (GPSCs) with dual periodicity and dual basis is herein explored for the first time. Broadband, wide-incident-angle, and polarization-independent light-trapping enhancement was achieved in silicon solar cells patterned with these GPSCs. These super-crystals were designed by multi-beam interference, rendering them flexible and efficient. The optical response of the patterned silicon solar cell retained Bloch-mode resonance; however, light absorption was greatly enhanced in broadband wavelengths due to the graded, complex unit super-cell nanostructures, leading to the overlap of Bloch-mode resonances. The broadband, wide-angle light coupling and trapping enhancement mechanism are understood to be due to the spatial variance of the index of refraction, and this spatial variance is due to the varying filling fraction, the dual basis, and the varying lattice constants in different directions.
TL;DR: In this paper, the authors report the characterization of the polarization state of FERMI FEL-2 down to 5 nm and show a high degree of polarization of the FEL pulses, typically above 95%.
Abstract: The control of polarization state in soft and hard X-ray light is of crucial interest to probe structural and symmetry properties of matter. Thanks to their Apple-II type undulators, the FERMI-Free Electron Lasers are able to provide elliptical, circular or linearly polarized light within the extreme ultraviolet and soft X-ray range. In this paper, we report the characterization of the polarization state of FERMI FEL-2 down to 5 nm. The results show a high degree of polarization of the FEL pulses, typically above 95%. The campaign of measurements was performed at the Low Density Matter beamline using an electron Time-Of-Flight based polarimeter.
TL;DR: In this article, a low pass filter operation on the C-BPS phase noise estimator is proposed to reduce the number of necessary test phases to achieve the performance of the conventional blind phase search algorithm, thereby allowing a drastic reduction of its practical implementation complexity.
Abstract: The inherent discrete phase search nature of the conventional blind phase search (C-BPS) algorithm is found to introduce angular quantization noise in its phase noise estimator. The angular quantization noise found in the C-BPS is shown to limit its achievable performance and its potential low complexity implementation. A novel filtered BPS algorithm (F-BPS) is proposed and demonstrated to mitigate this quantization noise by performing a low pass filter operation on the C-BPS phase noise estimator. The improved performance of the proposed F-BPS algorithm makes it possible to significantly reduce the number of necessary test phases to achieve the C-BPS performance, thereby allowing for a drastic reduction of its practical implementation complexity. The proposed F-BPS scheme performance is evaluated on a 28-Gbaud 16QAM and 64QAM both in simulations and experimentally. Results confirm a substantial improvement of the performance along with a significant reduction of its potential implementation complexity compared to that of the C-BPS.
TL;DR: Simulation results show that varying the bandwidth granularity based on the optical path fragmentation status can offer an improved performance over fixed granularity with respect to the bandwidth blocking probability, the number of path splitting actions, the throughput, and the differential delay constraint issue in terms of: the network bandwidth utilization and multipath distribution.
Abstract: Elastic optical networks (EONs) based on orthogonal frequency-division multiplexing (OFDM) are considered a promising solution for the next optical network’s generation. These networks make it possible to choose an adequate portion of the available spectrum to satisfy the requested capacity. In this paper, we consider the impact of spectrum fragmentation along the optical single/multipath routing transmission on the efficiency of the EONs. This involves reducing the fragmentation effects by dynamically updating and controlling the minimum bandwidth allocation granularity (ɡ). We adopt linear and nonlinear dynamic mechanisms, which are denoted as LDAɡ and NLDAɡ, respectively, to choose proper bandwidth granularities that are proportional to the optical link/path bandwidth fragmentation status. In order to avoid either splitting the capacity request over many routing paths, which would increase the management complexity, or encouraging single path transmission, the proposed schemes aim to choose a proper bandwidth allocation granularity (ɡ) for a predefined set of suggested values. Simulation results show that varying the bandwidth granularity based on the optical path fragmentation status can offer an improved performance over fixed granularity with respect to the bandwidth blocking probability, the number of path splitting actions, the throughput, and the differential delay constraint issue in terms of: the network bandwidth utilization and multipath distribution.
TL;DR: In this article, a quantum photonic circuit with the ability to produce continuous variable quantum vortex states is proposed, which produces two singlemode squeezed states which go through a Mach-Zehnder interferometer where photons are subtracted by means of weakly coupled directional couplers towards ancillary waveguides.
Abstract: A quantum photonic circuit with the ability to produce continuous variable quantum vortex states is proposed. This device produces two single-mode squeezed states which go through a Mach-Zehnder interferometer where photons are subtracted by means of weakly coupled directional couplers towards ancillary waveguides. The detection of a number of photons in these modes heralds the production of a quantum vortex. Likewise, a measurement system of the order and handedness of quantum vortices is introduced and the performance of both devices is analyzed in a realistic scenario by means of the Wigner function. These devices open the possibility of using the quantum vortices as carriers of quantum information.
TL;DR: In this article, a multi-stage optical klystron (OK) scheme was applied on the FEL-2 line at FERMI, whose layout includes three dispersive sections.
Abstract: The optical klystron enhancement to a self-amplified spontaneous emission free electron laser has been studied in theory and in simulations and has been experimentally demonstrated on a single-pass high-gain free electron laser, the FERMI FEL-1, in 2014. The main concept consists of two undulators separated by a dispersive section that converts the energy modulation induced in the first undulator in density modulation, enhancing the coherent harmonic generation in the first part of the second undulator. This scheme could be replicated in a multi-stage: the bunching is enhanced after each dispersive section, consistently reducing the saturation length. We have applied the multi-stage optical klystron (OK) scheme on the FEL-2 line at FERMI, whose layout includes three dispersive sections. Optimizing the strength of the dispersions allowed a significant increase of the self-amplified spontaneous emission (SASE) intensity in comparison to a single-stage OK and extending to the soft-X rays the OK enhanced SASE previously demonstrated on FEL-1.
TL;DR: The potential of the two-color mode implemented at the FERMI free-electron laser (FEL) source for pumping and probing selectively different atomic species has been demonstrated by time-resolved scattering experiments with permalloy (FeNi alloy) and NiFe 2 O 4 samples.
Abstract: The potential of the two-color mode implemented at the FERMI free-electron laser (FEL) source for pumping and probing selectively different atomic species has been demonstrated by time-resolved scattering experiments with permalloy (FeNi alloy) and NiFe 2 O 4 samples. We monitored the ultra-fast demagnetization of Ni induced by the pump FEL pulse, by tuning the linearly-polarized FEL probe pulse to the Ni-3p resonance and measuring the scattered intensity in the transverse magneto-optical Kerr effect geometry. The measurements were performed by varying the intensity of the FEL pump pulse, tuning its wavelength to and off of the Fe-3p resonance, and by spanning the FEL probe pulse delays across the 300–900 fs range. The obtained results have Photonics 2017, 4, 6 2 of 10 evidenced that for the case of NiFe 2 O 4 , there is a sensible difference in the magnetic response at the Ni site when the pump pulse causes electronic excitations at the Fe site.
TL;DR: In this article, the relationship between an emitter and a nearby resonant aperture is shown to be that of the resonance energy transfer where the emitter acts as a donor and the hole as an acceptor.
Abstract: For distances less 10 nm, a total energy transfer occurs from a quantum emitter to a nearby metallic surface, producing evanescent surface waves that are plasmonic in nature. When investigating a metallic nanohole supported on an optically dense substrate (such as diamond with nitrogen vacancy center), the scattering occurred preferentially from the diamond substrate towards the air for dipole distances less 10 nm from the aperture. In addition, an enhancement to the dipole’s radiative decay rate was observed when resonance of the aperture matched the emitters wavelength. The relationship between an emitter and a nearby resonant aperture is shown to be that of the resonance energy transfer where the emitter acts as a donor and the hole as an acceptor. In conjunction with the preferential scattering behavior, this has led to the proposed device that operates in transmission mode, eliminating the need for epi-illumination techniques and optically denser than air superstrates in the collection cycle, hence making the design simpler and more suitable for miniaturization. A design criterion for the surface grating is also proposed to improve the performance, where the period of the grating differs significantly from the wavelength of the surface plasmon polaritons. Response of the proposed device is further studied with respect to changes in nitrogen vacancy’s position and its dipolar orientation to identify the crystallographic planes of diamond over which the performance of the device is maximized.
TL;DR: In this paper, the authors theoretically explore a scheme for generating bright circularly and elliptically polarized high-order harmonics by bursts of linearly polarized pulses with a rotating polarization axis.
Abstract: We theoretically explore a scheme for generation of bright circularly and elliptically polarized high-order harmonics by bursts of linearly polarized pulses with a rotating polarization axis. Circularly polarized harmonics are formed if the bursts are comprised of N pulses that uphold an N-fold rotational symmetry, for N > 2. Rotating the polarization axes of the comprising pulses can generate elliptical harmonics with a collectively tunable ellipticity, from circular through elliptic to linear. The method preserves the single-cycle, single-atom and macroscopic physics of ‘standard’ linearly polarized high harmonic generation, with a high yield and cutoff energy. We investigate the method from a time-domain perspective, as well as a photonic perspective, and formulate the energy and spin-angular momentum conservation laws for this scheme. We find that the case of N = 4 is optimal for this method, resulting with the highest conversion efficiency of elliptical photons. The new features of this source offer new applications to helical ultrafast spectroscopy and ellipsometry.