Separations 

About: Separations is an academic journal published by Multidisciplinary Digital Publishing Institute. The journal publishes majorly in the area(s): Chemistry & Chromatography. It has an ISSN identifier of 2297-8739. It is also open access. Over the lifetime, 1289 publications have been published receiving 5468 citations.

Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction

Abstract: In the over 1,800 articles published since their inception in 2001, most deep eutectic solvents (DES) synthesized have been hydrophilic. The low cost, low toxicity, and bioavailability of DES make the solvent ‘green’ and sustainable for diverse applications. Conversely, the hydrophilicity of DES limits their practical application to only polar compounds, which is a major drawback of the solvent. For the past three years, hydrophobic deep eutectic solvents (HDES) have emerged as an alternative extractive media capable of extracting non-polar organic and inorganic molecules from aqueous environments. Due to the infancy of HDES, for the first time, this mini-review summarizes the recent developmental advances in HDES synthesis, applications, challenges, and future perspectives of the solvent. In the future, it is believed HDES will replace the majority of toxic organic solvents used for analytical purposes.

Recent Trends in Microextraction Techniques Employed in Analytical and Bioanalytical Sample Preparation

Abstract: Sample preparation has been recognized as a major step in the chemical analysis workflow. As such, substantial efforts have been made in recent years to simplify the overall sample preparation process. Major focusses of these efforts have included miniaturization of the extraction device; minimizing/eliminating toxic and hazardous organic solvent consumption; eliminating sample pre-treatment and post-treatment steps; reducing the sample volume requirement; reducing extraction equilibrium time, maximizing extraction efficiency etc. All these improved attributes are congruent with the Green Analytical Chemistry (GAC) principles. Classical sample preparation techniques such as solid phase extraction (SPE) and liquid-liquid extraction (LLE) are being rapidly replaced with emerging miniaturized and environmentally friendly techniques such as Solid Phase Micro Extraction (SPME), Stir bar Sorptive Extraction (SBSE), Micro Extraction by Packed Sorbent (MEPS), Fabric Phase Sorptive Extraction (FPSE), and Dispersive Liquid-Liquid Micro Extraction (DLLME). In addition to the development of many new generic extraction sorbents in recent years, a large number of molecularly imprinted polymers (MIPs) created using different template molecules have also enriched the large cache of microextraction sorbents. Application of nanoparticles as high-performance extraction sorbents has undoubtedly elevated the extraction efficiency and method sensitivity of modern chromatographic analyses to a new level. Combining magnetic nanoparticles with many microextraction sorbents has opened up new possibilities to extract target analytes from sample matrices containing high volumes of matrix interferents. The aim of the current review is to critically audit the progress of microextraction techniques in recent years, which has indisputably transformed the analytical chemistry practices, from biological and therapeutic drug monitoring to the environmental field; from foods to phyto-pharmaceutical applications.

Fabric Phase Sorptive Extraction Explained

Abstract: The theory and working principle of fabric phase sorptive extraction (FPSE) is presented. FPSE innovatively integrates the benefits of sol–gel coating technology and the rich surface chemistry of cellulose/polyester/fiberglass fabrics, resulting in a microextraction device with very high sorbent loading in the form of an ultra-thin coating. This porous sorbent coating and the permeable substrate synergistically facilitate fast extraction equilibrium. The flexibility of the FPSE device allows its direct insertion into original, unmodified samples of different origin. Strong chemical bonding between the sol–gel sorbent and the fabric substrate permits the exposure of FPSE devices to any organic solvent for analyte back-extraction/elution. As a representative sorbent, sol–gel poly(ethylene glycol) coating was generated on cellulose substrates. Five (cm2) segments of these coated fabrics were used as the FPSE devices for sample preparation using direct immersion mode. An important class of environmental pollutants—substituted phenols—was used as model compounds to evaluate the extraction performance of FPSE. The high primary contact surface area (PCSA) of the FPSE device and porous structure of the sol–gel coatings resulted in very high sample capacities and incredible extraction sensitivities in a relatively short period of time. Different extraction parameters were evaluated and optimized. The new extraction devices demonstrated part per trillion level detection limits for substitute phenols, a wide range of detection linearity, and good performance reproducibility.

Biosorption and Bioaccumulation Abilities of Actinomycetes/Streptomycetes Isolated from Metal Contaminated Sites

Abstract: Heavy metal pollution is of great concern. Due to expansion of industrial activities, a large amount of metal is released into the environment, disturbing its fragile balance. Conventional methods of remediation of heavy metal-polluted soil and water are expensive and inefficient. Therefore, new techniques are needed to provide environmentally friendly and highly selective remediation. Streptomycetes, with their unique growth characteristics, ability to form spores and mycelia, and relatively rapid colonization of substrates, act as suitable agents for bioremediation of metals and organic compounds in polluted soil and water. A variety of mechanisms could be involved in reduction of metals in the environment, e.g., sorption to exopolymers, precipitation, biosorption and bioaccumulation. Studies performed on biosorption and bioaccumulation potential of streptomycetes could be used as a basis for further development in this field. Streptomycetes are of interest because of their ability to survive in environments contaminated by metals through the production of a wide range of metal ion chelators, such as siderophores, which provide protection from the negative effects of heavy metals or specific uptake for specialized metabolic processes. Many strains also have the equally important characteristic of resistance to high concentrations of heavy metals.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Abstract: Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.