Showing papers in "Small in 2017"

Hierarchical Porous O-doped g-C3N4 with Enhanced Photocatalytic CO2 Reduction Activity

Abstract: Artificial photosynthesis of hydrocarbon fuels by utilizing solar energy and CO2 is considered as a potential route for solving ever-increasing energy crisis and greenhouse effect. Herein, hierarchical porous O-doped graphitic carbon nitride (g-C3 N4 ) nanotubes (OCN-Tube) are prepared via successive thermal oxidation exfoliation and curling-condensation of bulk g-C3 N4 . The as-prepared OCN-Tube exhibits hierarchically porous structures, which consist of interconnected multiwalled nanotubes with uniform diameters of 20-30 nm. The hierarchical OCN-Tube shows excellent photocatalytic CO2 reduction performance under visible light, with methanol evolution rate of 0.88 µmol g-1 h-1 , which is five times higher than bulk g-C3 N4 (0.17 µmol g-1 h-1 ). The enhanced photocatalytic activity of OCN-Tube is ascribed to the hierarchical nanotube structure and O-doping effect. The hierarchical nanotube structure endows OCN-Tube with higher specific surface area, greater light utilization efficiency, and improved molecular diffusion kinetics, due to the more exposed active edges and multiple light reflection/scattering channels. The O-doping optimizes the band structure of g-C3 N4 , resulting in narrower bandgap, greater CO2 affinity, and uptake capacity as well as higher separation efficiency of photogenerated charge carriers. This work provides a novel strategy to design hierarchical g-C3 N4 nanostructures, which can be used as promising photocatalyst for solar energy conversion.

Flexible Sensing Electronics for Wearable/Attachable Health Monitoring

Abstract: Wearable or attachable health monitoring smart systems are considered to be the next generation of personal portable devices for remote medicine practices. Smart flexible sensing electronics are components crucial in endowing health monitoring systems with the capability of real-time tracking of physiological signals. These signals are closely associated with body conditions, such as heart rate, wrist pulse, body temperature, blood/intraocular pressure and blood/sweat bio-information. Monitoring such physiological signals provides a convenient and non-invasive way for disease diagnoses and health assessments. This Review summarizes the recent progress of flexible sensing electronics for their use in wearable/attachable health monitoring systems. Meanwhile, we present an overview of different materials and configurations for flexible sensors, including piezo-resistive, piezo-electrical, capacitive, and field effect transistor based devices, and analyze the working principles in monitoring physiological signals. In addition, the future perspectives of wearable healthcare systems and the technical demands on their commercialization are briefly discussed.

Sub‐Micron Polymeric Stomatocytes as Promising Templates for Confined Crystallization and Diffraction Experiments

Abstract: The possibility of using sub-micrometer polymeric stomatocytes is investigated to effectuate confined crystallization of inorganic compounds These bowl-shaped polymeric compartments facilitate confined crystallization while their glassy surfaces provide their crystalline cargos with convenient shielding from the electron beam's harsh effects during transmission electron microscopy experiments Stomatocytes host the growth of a single nanocrystal per nanocavity, and the electron diffraction experiments reveal that their glassy membranes do not interfere with the diffraction patterns obtained from their crystalline cargos Therefore, it is expected that the encapsulation and crystallization within these compartments can be considered as a promising template (nanovials) that hold and protect nanocrystals and protein clusters from the direct radiation damage before data acquisition, while they are examined by modern crystallography methodologies such as serial femtosecond crystallography

All Inorganic Halide Perovskites Nanosystem: Synthesis, Structural Features, Optical Properties and Optoelectronic Applications.

Abstract: The recent success of organometallic halide perovskites (OHPs) in photovoltaic devices has triggered lots of corresponding research and many perovskite analogues have been developed to look for devices with comparable performance but better stability. Upon the preparation of all inorganic halide perovskite nanocrystals (IHP NCs), research activities have soared due to their better stability, ultrahigh photoluminescence quantum yield (PL QY), and composition dependent luminescence covering the whole visible region with narrow line-width. They are expected to be promising materials for next generation lighting and display, and many other applications. Within two years, a lot of interesting results have been observed. Here, the synthesis of IHPs is reviewed, and their progresses in optoelectronic devices and optical applications, such as light-emitting diodes (LEDs), photodetectors (PDs), solar cells (SCs), and lasing, is presented. Information and recent understanding of their crystal structures and morphology modulations are addressed. Finally, a brief outlook is given, highlighting the presently main problems and their possible solutions and future development directions.

A Mussel-Inspired Conductive, Self-Adhesive, and Self-Healable Tough Hydrogel as Cell Stimulators and Implantable Bioelectronics.

Abstract: A graphene oxide conductive hydrogel is reported that simultaneously possesses high toughness, self-healability, and self-adhesiveness. Inspired by the adhesion behaviors of mussels, our conductive hydrogel shows self-adhesiveness on various surfaces and soft tissues. The hydrogel can be used as self-adhesive bioelectronics, such as electrical stimulators to regulate cell activity and implantable electrodes for recording in vivo signals.

High‐Performance Aqueous Zinc–Ion Battery Based on Layered H2V3O8 Nanowire Cathode

Abstract: Rechargeable aqueous zinc-ion batteries have offered an alternative for large-scale energy storage owing to their low cost and material abundance. However, developing suitable cathode materials with excellent performance remains great challenges, resulting from the high polarization of zinc ion. In this work, an aqueous zinc-ion battery is designed and constructed based on H2 V3 O8 nanowire cathode, Zn(CF3 SO3 )2 aqueous electrolyte, and zinc anode, which exhibits the capacity of 423.8 mA h g-1 at 0.1 A g-1 , and excellent cycling stability with a capacity retention of 94.3% over 1000 cycles. The remarkable electrochemical performance is attributed to the layered structure of H2 V3 O8 with large interlayer spacing, which enables the intercalation/de-intercalation of zinc ions with a slight change of the structure. The results demonstrate that exploration of the materials with large interlayer spacing is an effective strategy for improving electrochemical stability of electrodes for aqueous Zn ion batteries.

Graphene Quantum Dots-Capped Magnetic Mesoporous Silica Nanoparticles as a Multifunctional Platform for Controlled Drug Delivery, Magnetic Hyperthermia, and Photothermal Therapy.

Abstract: A multifunctional platform is reported for synergistic therapy with controlled drug release, magnetic hyperthermia, and photothermal therapy, which is composed of graphene quantum dots (GQDs) as caps and local photothermal generators and magnetic mesoporous silica nanoparticles (MMSN) as drug carriers and magnetic thermoseeds. The structure, drug release behavior, magnetic hyperthermia capacity, photothermal effect, and synergistic therapeutic efficiency of the MMSN/GQDs nanoparticles are investigated. The results show that monodisperse MMSN/GQDs nanoparticles with the particle size of 100 nm can load doxorubicin (DOX) and trigger DOX release by low pH environment. Furthermore, the MMSN/GQDs nanoparticles can efficiently generate heat to the hyperthermia temperature under an alternating magnetic field or by near infrared irradiation. More importantly, breast cancer 4T1 cells as a model cellular system, the results indicate that compared with chemotherapy, magnetic hyperthermia or photothermal therapy alone, the combined chemo-magnetic hyperthermia therapy or chemo-photothermal therapy with the DOX-loaded MMSN/GQDs nanosystem exhibits a significant synergistic effect, resulting in a higher efficacy to kill cancer cells. Therefore, the MMSN/GQDs multifunctional platform has great potential in cancer therapy for enhancing the therapeutic efficiency.

First-Row Transition Metal Based Catalysts for the Oxygen Evolution Reaction under Alkaline Conditions: Basic Principles and Recent Advances.

Abstract: Owing to its abundance, high gravimetric energy density, and environmental friendliness, hydrogen is a promising renewable energy to replace fossil fuels One of the most prominent routes toward hydrogen acquisition is water splitting, which is currently bottlenecked by the sluggish kinetics of oxygen evolution reaction (OER) Numerous of electrocatalysts have been developed in the past decades to accelerate the OER process Up to now, the first-row transition metal based compounds are in pole position under alkaline conditions, which have become subjects of extensive studies Recently, significant advances in providing compelling catalytic performance as well as exploring their catalytic mechanisms have been achieved in this area In this review, we summarized the fundamentals and recent progresses in first-row transition metal based OER catalysts, with special emphasis on the pathways of promoting catalytic performance by concrete strategies New insight into material design, particularly the role of experimental approaches in the electrocatalytic performance and reaction mechanisms of OER are expected to be provided

Recent Progress on Flexible and Wearable Supercapacitors

Abstract: Recently, wearable electronic devices including electrical sensors, flexible displays, and health monitors have received considerable attention and experienced rapid progress. Wearable supercapacitors attract tremendous attention mainly due to their high stability, low cost, fast charging/discharging, and high efficiency; properties that render them value for developing fully flexible devices. In this Concept, the recent achievements and advances made in flexible and wearable supercapacitors are presented, especially highlighting the promising performances of yarn/fiber-shaped and planar supercapacitors. On the basis of their working mechanism, electrode materials including carbon-based materials, metal oxide-based materials, and conductive polymers with an emphasis on the performance-optimization method are introduced. The latest representative techniques and active materials of recently developed supercapacitors with superior performance are summarized. Furthermore, the designs of 1D and 2D electrodes are discussed according to their electrically conductive supporting materials. Finally, conclusions, challenges, and perspective in optimizing and developing the electrochemical performance and function of wearable supercapacitors for their practical utility are addressed.

High-Performance Piezoelectric Nanogenerators with Imprinted P(VDF-TrFE)/BaTiO3 Nanocomposite Micropillars for Self-Powered Flexible Sensors.

Abstract: Piezoelectric nanogenerators with large output, high sensitivity, and good flexibility have attracted extensive interest in wearable electronics and personal healthcare. In this paper, the authors propose a high-performance flexible piezoelectric nanogenerator based on piezoelectrically enhanced nanocomposite micropillar array of polyvinylidene fluoride-trifluoroethylene (P(VDF-TrFE))/barium titanate (BaTiO3 ) for energy harvesting and highly sensitive self-powered sensing. By a reliable and scalable nanoimprinting process, the piezoelectrically enhanced vertically aligned P(VDF-TrFE)/BaTiO3 nanocomposite micropillar arrays are fabricated. The piezoelectric device exhibits enhanced voltage of 13.2 V and a current density of 0.33 µA cm-2 , which an enhancement by a factor of 7.3 relatives to the pristine P(VDF-TrFE) bulk film. The mechanisms of high performance are mainly attributed to the enhanced piezoelectricity of the P(VDF-TrFE)/BaTiO3 nanocomposite materials and the improved mechanical flexibility of the micropillar array. Under mechanical impact, stable electricity is stably generated from the nanogenerator and used to drive various electronic devices to work continuously, implying its significance in the field of consumer electronic devices. Furthermore, it can be applied as self-powered flexible sensor work in a noncontact mode for detecting air pressure and wearable sensors for detecting some human vital signs including different modes of breath and heartbeat pulse, which shows its potential applications in flexible electronics and medical sciences.

Metal Phosphides and Phosphates-based Electrodes for Electrochemical Supercapacitors.

Abstract: Phosphorus compounds, such as metal phosphides and phosphates have shown excellent performances and great potential in electrochemical energy storage, which are demonstrated by research works published in recent years. Some of these metal phosphides and phosphates and their hybrids compare favorably with transition metal oxides/hydroxides, which have been studied extensively as a class of electrode materials for supercapacitor applications, where they have limitations in terms of electrical and ion conductivity and device stability. To be specific, metal phosphides have both metalloid characteristics and good electric conductivity. For metal phosphates, the open-framework structures with large channels and cavities endow them with good ion conductivity and charge storage capacity. In this review, we present the recent progress on metal phosphides and phosphates, by focusing on their advantages/disadvantages and potential applications as a new class of electrode materials in supercapacitors. The synthesis methods to prepare these metal phosphides/phosphates are looked into, together with the scientific insights involved, as they strongly affect the electrochemical energy storage performance. Particular attentions are paid to those hybrid-type materials, where strong synergistic effects exist. In the summary, the future perspectives and challenges for the metal phosphides, phosphates and hybrid-types are proposed and discussed.

In Situ Derived CoB Nanoarray: A High-Efficiency and Durable 3D Bifunctional Electrocatalyst for Overall Alkaline Water Splitting.

Abstract: The development of efficient bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of extreme importance for future renewable energy systems. This Communication reports the recent finding that room-temperature treatment of CoO nanowire array on Ti mesh by NaBH4 in alkaline media leads to in situ development of CoB nanoparticles on nanowire surface. The resulting self-supported CoB@CoO nanoarray behaves as a 3D bifunctional electrocatalyst with high activity and durability for both HER (<17% current density degradation after 20 h electrolysis) and OER (<14% current density degradation after 20 h electrolysis) with the need of the overpotentials of 102 and 290 mV to drive 50 mA cm-2 in 1.0 m KOH, respectively. Moreover, its two-electrode alkaline water electrolyzer also shows remarkably high durability and only demands a cell voltage of 1.67 V to deliver 50 mA cm-2 water-splitting current with a current density retention of 81% after 20 h electrolysis. This work provides a promising methodology for the designing and fabricating of metal-boride based nanoarray as a high-active water-splitting catalyst electrode for applications.

Hybrid Organic-Inorganic Perovskite Photodetectors.

Abstract: Hybrid organic-inorganic perovskite materials garner enormous attention for a wide range of optoelectronic devices. Due to their attractive optical and electrical properties including high optical absorption coefficient, high carrier mobility, and long carrier diffusion length, perovskites have opened up a great opportunity for high performance photodetectors. This review aims to give a comprehensive summary of the significant results on perovskite-based photodetectors, focusing on the relationship among the perovskite structures, device configurations, and photodetecting performances. An introduction of recent progress in various perovskite structure-based photodetectors is provided. The emphasis is placed on the correlation between the perovskite structure and the device performance. Next, recent developments of bandgap-tunable perovskite and hybrid photodetectors built from perovskite heterostructures are highlighted. Then, effective approaches to enhance the stability of perovskite photodetector are presented, followed by the introduction of flexible and self-powered perovskite photodetectors. Finally, a summary of the previous results is given, and the major challenges that need to be addressed in the future are outlined. A comprehensive summary of the research status on perovskite photodetectors is hoped to push forward the development of this field.

Bioinspired Special Wettability Surfaces: From Fundamental Research to Water Harvesting Applications

Abstract: Nowadays, the pollution of water has become worse in many parts of the world, which causes a severe shortage of clean water and attracts widespread attention worldwide. Bioinspired from nature, i.e. spider silk, cactus, Namib desert beetle, Nepenthes alata, special wettability surfaces have attracted great interest from fundamental research to water-harvesting applications. Here, recently published literature about creatures possessing water-harvesting ability are reviewed, with a focus on the corresponding water-harvesting mechanisms of creatures in dry or arid regions, consisting of the theory of wetting and transporting. Then a detailed account of the innovative fabrication technologies and bionic water-harvesting materials with special wetting are summarized, i.e. bio-inspired artificial spider silk, bio-inspired artificial cactus-like structures, and bio-inspired artificial Namib desert beetle-like surfaces. Special attentions are paid to the discussion of the advantages and disadvantages of the technologies, as well as factors that affect the amount of water-harvesting. Finally, conclusions, future outlooks and the current challenges for future development of the water-harvesting technology are presented and discussed.

Perovskite/Carbon Composites: Applications in Oxygen Electrocatalysis

Abstract: Oxygen electrocatalysis, i.e., oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), plays an extremely important role in oxygen-based renewable-energy technologies such as rechargeable metal-air batteries, regenerative fuel cells and water splitting. Perovskite oxides have recently attracted increasing interest and hold great promise as efficient ORR and OER catalysts to replace noble-metal-based catalysts, owing to their high intrinsic catalytic activity, abundant variety, low cost, and rich resources. The introduction of perovskite-carbon interfaces by forming perovskite/carbon composites may bring a synergistic effect between the two phases, thus benefiting the oxygen electrocatalysis. This review provides a comprehensive overview of recent advances in perovskite/carbon composites for oxygen electrocatalysis in alkaline media, aiming to provide insights into the key parameters that influence the ORR/OER performance of the composites, including the physical/chemical properties and morphologies of the perovskites, the multiple roles of carbon, the synthetic method and the synergistic effect. A special emphasis is placed on the origin of the synergistic effect associated with the interfacial interaction between the perovskite and the carbon phases for enhanced ORR/OER performance. Finally, the existing challenges and the future directions for the synthesis and development of more efficient oxygen catalysts based on perovskite/carbon composites are proposed.

Recent Advances in Atomic Metal Doping of Carbon-based Nanomaterials for Energy Conversion.

Abstract: Nanostructured metal-contained catalysts are one of the most widely used types of catalysts applied to facilitate some of sluggish electrochemical reactions. However, the high activity of these catalysts cannot be sustained over a variety of pH ranges. In an effort to develop highly active and stable metal-contained catalysts, various approaches have been pursued with an emphasis on metal particle size reduction and doping on carbon-based supports. These techniques enhances the metal-support interactions, originating from the chemical bonding effect between the metal dopants and carbon support and the associated interface, as well as the charge transfer between the atomic metal species and carbon framework. This provides an opportunity to tune the well-defined metal active centers and optimize their activity, selectivity and stability of this type of (electro)catalyst. Herein, recent advances in synthesis strategies, characterization and catalytic performance of single atom metal dopants on carbon-based nanomaterials are highlighted with attempts to understand the electronic structure and spatial arrangement of individual atoms as well as their interaction with the supports. Applications of these new materials in a wide range of potential electrocatalytic processes in renewable energy conversion systems are also discussed with emphasis on future directions in this active field of research.

TiL4 -Coordinated Black Phosphorus Quantum Dots as an Efficient Contrast Agent for In Vivo Photoacoustic Imaging of Cancer.

Abstract: Black phosphorus quantum dots coordinated with a sulfonic ester of the titanium ligand are prepared and exhibit enhanced stability. In vitro and in vivo photoacoustic imaging applications demonstrate that the quantum dots can efficiently accumulate inside the tumor producing tumor profiles with high spatial resolution, demonstrating their potential as an efficient agent for photoacoustic imaging.

Self‐Assembled Fe–N‐Doped Carbon Nanotube Aerogels with Single‐Atom Catalyst Feature as High‐Efficiency Oxygen Reduction Electrocatalysts

Abstract: Self-assembled M-N-doped carbon nanotube aerogels with single-atom catalyst feature are for the first time reported through one-step hydrothermal route and subsequent facile annealing treatment. By taking advantage of the porous nanostructures, 1D nanotubes as well as single-atom catalyst feature, the resultant Fe-N-doped carbon nanotube aerogels exhibit excellent oxygen reduction reaction electrocatalytic performance even better than commercial Pt/C in alkaline solution.

Novel Principles and Nanostructuring Methods for Enhanced Thermoelectrics.

Abstract: Thermoelectrics (TE), the direct solid-state conversion of waste heat to electricity, is a promising field with potential wide-scale application for power generation. Intrinsic conflicts in the requirements for high electrical conductivity but (a) low thermal conductivity and (b) a large Seebeck coefficient have made enhancing TE performance difficult. Several recent striking advances in the field are reviewed. In regard to the former conflict, notable bottom-up nanostructuring methods for phonon-selective scattering are discovered, namely using nanosheets, dislocations, and most strikingly a process to fabricate nano-micropores leading to a 100% enhancement in the figure of merit (ZT ≈ 1.6) for rare-earth-free skutterudites. Porous materials are hitherto considered as having poor TE performance, so this is a new paradigm. In regard to the latter conflict, nanocomposite materials with hybrid effects and use of magnetism are emerging as novel bottom-up methods to enhance TE. Material informatics efforts to identify high-ZT materials are also reviewed.

2D MoS 2 Neuromorphic Devices for Brain-Like Computational Systems.

Abstract: Hardware implementation of artificial synapses/neurons with 2D solid-state devices is of great significance for nanoscale brain-like computational systems. Here, 2D MoS2 synaptic/neuronal transistors are fabricated by using poly(vinyl alcohol) as the laterally coupled, proton-conducting electrolytes. Fundamental synaptic functions, such as an excitatory postsynaptic current, paired-pulse facilitation, and a dynamic filter for information transmission of biological synapse, are successfully emulated. Most importantly, with multiple input gates and one modulatory gate, spiking-dependent logic operation/modulation, multiplicative neural coding, and neuronal gain modulation are also experimentally demonstrated. The results indicate that the intriguing 2D MoS2 transistors are also very promising for the next-generation of nanoscale neuromorphic device applications.

Hydrothermal Synthesis of VO2 Polymorphs: Advantages, Challenges and Prospects for the Application of Energy Efficient Smart Windows

Abstract: Vanadium dioxide (VO2 ) is a widely studied inorganic phase change material, which has a reversible phase transition from semiconducting monoclinic to metallic rutile phase at a critical temperature of τc ≈ 68 °C. The abrupt decrease of infrared transmittance in the metallic phase makes VO2 a potential candidate for thermochromic energy efficient windows to cut down building energy consumption. However, there are three long-standing issues that hindered its application in energy efficient windows: high τc , low luminous transmittance (Tlum ), and undesirable solar modulation ability (ΔTsol ). Many approaches, including nano-thermochromism, porous films, biomimetic surface reconstruction, gridded structures, antireflective overcoatings, etc, have been proposed to tackle these issues. The first approach-nano-thermochromism-which is to integrate VO2 nanoparticles in a transparent matrix, outperforms the rest; while the thermochromic performance is determined by particle size, stoichiometry, and crystallinity. A hydrothermal method is the most common method to fabricate high-quality VO2 nanoparticles, and has its own advantages of large-scale synthesis and precise phase control of VO2 . This Review focuses on hydrothermal synthesis, physical properties of VO2 polymorphs, and their transformation to thermochromic VO2 (M), and discusses the advantages, challenges, and prospects of VO2 (M) in energy-efficient smart windows application.

Flexible Photodetectors Based on Novel Functional Materials.

Abstract: Flexible photodetectors have attracted a great deal of research interest in recent years due to their great possibilities for application in a variety of emerging areas such as flexible, stretchable, implantable, portable, wearable and printed electronics and optoelectronics. Novel functional materials, including materials with zero-dimensional (0D) and one-dimensional (1D) inorganic nanostructures, two-dimensional (2D) layered materials, organic semiconductors and perovskite materials, exhibit appealing electrical and optoelectrical properties, as well as outstanding mechanical flexibility, and have been widely studied as building blocks in cost-effective flexible photodetection. Here, we comprehensively review the outstanding performance of flexible photodetectors made from these novel functional materials reported in recent years. The photoresponse characteristics and flexibility of the devices will be discussed systematically. Summaries and challenges are provided to guide future directions of this vital research field.

Advanced Photoacoustic Imaging Applications of Near-Infrared Absorbing Organic Nanoparticles

Abstract: Progress of nanotechnology in recent years has stimulated fast development of nanoparticles in biomedical research. Photoacoustic (PA) imaging as an emerging non-invasive technique in molecular imaging has improved imaging depth relative to conventional optical imaging, demonstrating great potential in clinical applications. The convergence of nanotechnology and PA imaging has enabled a broad spectrum of new opportunities in fundamental biology and translation medicine. This review focuses on the recent advances of organic nanoparticles in PA imaging applications. Near-infrared absorbing organic nanoparticles are classified and discussed according to their different imaging applications, which include tumor imaging, gastrointestinal imaging, sentinel lymph node imaging, disease microenvironment imaging and real-time drug imaging. The chemistry and PA properties of organic nanoparticles are discussed in details to highlight their own merits, and their challenges and perspectives in PA imaging are also discussed.

Recent Advances in Synthesis and Biomedical Applications of Two-Dimensional Transition Metal Dichalcogenide Nanosheets.

Abstract: During recent decades, a giant leap in the development of nanotechnology has been witnessed. Numerous nanomaterials with different dimensions and unprecedented features have been developed and provided unimaginably wide scope to solve the challenging problems in biomedicine, such as cancer diagnosis and therapy. Recently, two-dimensional (2D) transition metal dichalcogenide (TMDC) nanosheets (NSs), including MoS2 , WS2 , and etc., have emerged as novel inorganic graphene analogues and attracted tremendous attention due to their unique structures and distinctive properties, and opened up great opportunities for biomedical applications, including ultrasensitive biosensing, biological imaging, drug delivery, cancer therapy, and antibacterial treatment. A comprehensive overview of different synthetic methods of ultrathin 2D TMDC NSs and their state-of-the-art biomedical applications, especially those that have appeared in the past few years, is presented. At the end of this review, the future opportunities and challenges for 2D TMDC NSs in biomedicine are also discussed.

Highly Compressible Integrated Supercapacitor–Piezoresistance-Sensor System with CNT–PDMS Sponge for Health Monitoring

Abstract: Rapid improvement of wearable electronics stimulates the demands for the matched functional devices and energy storage devices. Meanwhile, wearable microsystem requires every parts possessing high compressibility to accommodate large-scale mechanical deformations and complex conditions. In this work, a general carbon nanotube-polydimethylsiloxane (CNT-PDMS) sponge electrode is fabricated as the elementary component of the compressible system. CNT-PDMS sponge performs high sensitivity as a piezoresistance sensor, which is capable of detecting stress repeatedly and owns great electrochemical performance as a compressible supercapacitor which maintains stably under compressive strains, respectively. Assembled with the piezoresistance sensor and the compressible supercapacitor, such highly compressible integrated system can power and modulate the low-power electronic devices reliably. More importantly, attached to the epidermal skin or clothes, it can detect human motions, ranging from speech recognition to breathing record, thus showing feasibility in real-time health monitor and human-machine interfaces.

Recent Progress on Localized Field Enhanced Two-dimensional Material Photodetectors from Ultraviolet—Visible to Infrared

Abstract: Two-dimensional (2D) materials have drawn tremendous attention in recent years. Being atomically thin, stacked with van der Waals force and free of surface chemical dangling bonds, 2D materials exhibit several distinct physical properties. To date, 2D materials include graphene, transition metal dichalcogenides (TMDS), black phosphorus, black P(1-x) Asx , boron nitride (BN) and so forth. Owing to their various bandgaps, 2D materials have been utilized for photonics and optoelectronics. Photodetectors based on 2D materials with different structures and detection mechanisms have been established and present excellent performance. In this Review, localized field enhanced 2D material photodetectors (2DPDs) are introduced with sensitivity over the spectrum from ultraviolet, visible to infrared in the sight of the influence of device structure on photodetector performance instead of directly illustrating the detection mechanisms. Six types of localized fields are summarized. They are: ferroelectric field, photogating electric field, floating gate induced electrostatic field, interlayer built-in field, localized optical field, and photo-induced temperature gradient field, respectively. These localized fields are proved to effectively promote the detection ability of 2DPDs by suppressing background noise, enhancing optical absorption, improving electron-hole separation efficiency, amplifying photoelectric gain and/or extending the detection range.

A Multifunctional Tb-MOF for Highly Discriminative Sensing of Eu3+ /Dy3+ and as a Catalyst Support of Ag Nanoparticles.

Abstract: Exploring novel multifunctional rare earth materials is very important because these materials have fundamental interests, such as new structural facts and connecting modes, as well as potential technological applications, including optics, magnetic properties, sorption, and catalytic behaviors. Especially, employing these nanomaterials for sensing or catalytic reactions is still very challenging. Herein, a new superstable, anionic terbium-metal-organic-framework, [H2 N(CH3 )2 ][Tb(cppa)2 (H2 O)2 ], (China Three Gorges University (CTGU-1), H2 cppa = 5-(4-carboxyphenyl)picolinic acid), is successfully prepared, which can be used as a turn-on, highly-sensitive fluorescent sensor to detect Eu3+ and Dy3+ , with a detection limitation of 5 × 10-8 and 1 × 10-4 m in dimethylformamide, respectively. This result represents the first example of lanthanide-metal-organic-frameworks (Ln-MOF) that can be employed as a discriminative fluorescent probe to recognize Eu3+ and Dy3+ . In addition, through ion exchanging at room temperature, Ag(I) can be readily reduced in situ and embedded in the anionic framework, which leads to the formation of nanometal-particle@Ln-MOF composite with uniform size and distribution. The as-prepared Ag@CTGU-1 shows remarkable catalytic performance to reduce 4-nitrophenol, with a reduction rate constant κ as large as 2.57 × 10-2 s-1 ; almost the highest value among all reported noble-metal-nanoparticle@MOF composites.

Recent Progress in Near Infrared Light Triggered Photodynamic Therapy

Abstract: Nowadays, photodynamic therapy (PDT) is under the research spotlight as an appealing modality for various malignant tumors. Compared with conventional PDT treatment activated by ultraviolet or visible light, near infrared (NIR) light-triggered PDT possessing deeper penetration to lesion area and lower photodamage to normal tissue holds great potential for in vivo deep-seated tumor. In this review, recent research progress related to the exploration of NIR light responsive PDT nanosystems is summarized. To address current obstacles of PDT treatment and facilitate the effective utilization, several innovative strategies are developed and introduced into PDT nanosystems, including the conjugation with targeted moieties, O2 self-sufficient PDT, dual photosensitizers (PSs)-loaded PDT nanoplatform, and PDT-involved synergistic therapy. Finally, the potential challenges as well as the prospective for further development are also discussed.

MOF-Derived Hollow Cage Nix Co3-x O4 and Their Synergy with Graphene for Outstanding Supercapacitors.

Abstract: Highly optimized nickel cobalt mixed oxide has been derived from zeolite imidazole frameworks. While the pure cobalt oxide gives only 178.7 F g-1 as the specific capacitance at a current density of 1 A g-1 , the optimized Ni:Co 1:1 has given an extremely high and unprecedented specific capacitance of 1931 F g-1 at a current density of 1 A g-1 , with a capacitance retention of 69.5% after 5000 cycles in a three electrode test. This optimized Ni:Co 1:1 mixed oxide is further used to make a composite of nickel cobalt mixed oxide/graphene 3D hydrogel for enhancing the electrochemical performance by virtue of a continuous and porous graphene conductive network. The electrode made from GNi:Co 1:1 successfully achieves an even higher specific capacitance of 2870.8 F g-1 at 1 A g-1 and also shows a significant improvement in the cyclic stability with 81% capacitance retention after 5000 cycles. An asymmetric supercapacitor is also assembled using a pure graphene 3D hydrogel as the negative electrode and the GNi:Co 1:1 as the positive electrode. With a potential window of 1.5 V and binder free electrodes, the capacitor gives a high specific energy density of 50.2 Wh kg-1 at a high power density of 750 W kg-1 .

TPGS-Functionalized Polydopamine-Modified Mesoporous Silica as Drug Nanocarriers for Enhanced Lung Cancer Chemotherapy against Multidrug Resistance.

Abstract: A nanocarrier system of d-a-tocopheryl polyethylene glycol 1000 succinate (TPGS)-functionalized polydopamine-coated mesoporous silica nanoparticles (NPs) is developed for sustainable and pH-responsive delivery of doxorubicin (DOX) as a model drug for the treatment of drug-resistant nonsmall cell lung cancer. Such nanoparticles are of desired particle size, drug loading, and drug release profile. The surface morphology, surface charge, and surface chemical properties are also successfully characterized by a series of techniques such as transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) method, thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). The normal A549 cells and drug-resistant A549 cells are employed to access the cytotoxicity and cellular uptake of the NPs. The therapeutic effects of TPGS-conjugated nanoparticles are evaluated in vitro and in vivo. Compared with free DOX and DOX-loaded NPs without TPGS ligand modification, MSNs-DOX@PDA-TPGS exhibits outstanding capacity to overcome multidrug resistance and shows better in vivo therapeutic efficacy. This splendid drug delivery platform can also be sued to deliver other hydrophilic and hydrophobic drugs.