scispace - formally typeset
Search or ask a question

Showing papers in "Tectonics in 2015"


Journal ArticleDOI
TL;DR: In this article, a geodynamic framework of the South China Craton in the Early Paleozoic and Early Mesozoic has been modeled as developing through either oceanic convergence or intracontinental settings, based on an integrated structural, geochemical, zircon U-Pb and Hf isotopic and mica 40Ar/39Ar geochronologic study.
Abstract: The geodynamic framework of the South China Craton in the Early Paleozoic and Early Mesozoic has been modeled as developing through either oceanic convergence or intracontinental settings. On the basis of an integrated structural, geochemical, zircon U-Pb and Hf isotopic, and mica 40Ar/39Ar geochronologic study we establish that an intracontinental setting is currently the best fit for the available data. Our results suggest that widespread tectonomagmatic activity involving granite emplacement and mylonitic deformation occurred during two distinct stages: ~435–415 Ma and ~230–210 Ma. The coeval nature of emplacement of the plutons and their ductile deformation is corroborated by the subparallel orientation of the mylonitic foliation along the pluton margins, gneissose foliation in the middle part of pluton, the magmatic foliation within the plutons, and the schistosity in the surrounding metamorphosed country rocks. The 435–415 Ma granitoids exhibit peraluminous, high-K characteristics, and zircons show negative eHf(t) values (average −6.2, n = 66), and Paleoproterozoic two-stage model ages of circa 2.21–1.64 Ga (average 1.84 Ga). The data suggest that the Early Paleozoic plutons were derived from the partial melting of the Paleoproterozoic basement of the Cathaysia Block. The 230–210 Ma granites are potassic and have zircons with eHf(t) values of −2.8–−8.7 (average −5.4, n = 62), corresponding to TDM2 ages ranging from 2.0 to 1.44 Ga (average 1.64 Ga), suggesting that the Early Mesozoic partial melts in Cathaysia were also derived from basement. The geochemical distinction between the two phases of granites traces continental crustal evolution with time, with the Early Mesozoic crust enriched in potassium, silicon, and aluminum, but deficient in calcium, relative to the Paleozoic crust. Kinematical investigations provide evidence for an early-stage ductile deformation with a doubly vergent thrusting pattern dated at 433 ± 1 to 428 ± 1 Ma (40Ar/39Ar furnace step-heating pseudoplateau ages obtained on muscovite and biotite from mylonite and deformed granite) and a late-stage strike-slip movement with sinistral sense of ductile shearing at 232 ± 1 to 234 ± 1 Ma (40Ar/39Ar furnace step-heating pseudoplateau ages) along an E-W direction. The geological, geochemical, and isotopic signatures likely reflect far-field effects in response to continental assembly events at these times.

242 citations


Journal ArticleDOI
TL;DR: The Xing'an-inner Mongolia accretionary belt in the southeastern segment of the Central Asian Orogenic Belt (CAOB) was produced by the long-lived subduction and eventual closure of the Paleo-Asian Ocean and by the convergence between the North China Craton and the Mongolian microcontinent as mentioned in this paper.
Abstract: The Xing'an-Inner Mongolia accretionary belt in the southeastern segment of the Central Asian Orogenic Belt (CAOB) was produced by the long-lived subduction and eventual closure of the Paleo-Asian Ocean and by the convergence between the North China Craton and the Mongolian microcontinent. Two ophiolite belts have been recognized: the northern Erenhot-Hegenshan-Xi-Ujimqin ophiolite belt and the southern Solonker-Linxi ophiolite belt. Most basalts in the northern ophiolite belt exhibit characteristics of normal-type to enriched-type mid-ocean ridge basalt affinities with depleted Nd isotopic composition (epsilon(Nd)(t)>+5), comparable to modern Eastern Pacific mid-ocean ridge basalts. Most basaltic rocks in the southern belt show clear geochemical features of suprasubduction zone-type oceanic crust, probably formed in an arc/back-arc environment. The inferred back-arc extension along the Solonker-Linxi belt started at circa 280 Ma. Statistics of all the available age data for the ophiolites indicates two cycles of seafloor spreading/subduction, which gave rise to two main epochs of magmatic activity at 500-410 Ma and 360-220 Ma, respectively, with a gap of similar to 50 million years (Myr). The spatial and temporal distribution of the ophiolites and concurrent igneous rocks favor bilateral subduction toward the two continental margins in the convergence history, with final collision at similar to 230-220 Ma. In the whole belt, signals of continental collision and Himalayan-style mountain building are lacking. We thus conclude that the Xing'an-Inner Mongolia segment of the CAOB experienced two cycles of seafloor subduction, back-arc extension, and final "Appalachian-type" soft collision.

176 citations


Journal ArticleDOI
TL;DR: In this paper, a succession of rifting episodes characterized by different tectonic evolutions is shown to have led to the progressive breakdown of Pangea, and the role of mantle global warming promoted by continental agglomeration and mantle plumes in the weakening of the continental lithosphere.
Abstract: Pangea results from the progressive amalgamation of continental blocks achieved at 320 Ma. Assuming that the ancient concept of “active” versus “passive” rifting remains pertinent as end-members of more complex processes, we show that the progressive Pangea breakup occurred through a succession of rifting episodes characterized by different tectonic evolutions. A first episode of passive continental rifting during the Upper Carboniferous and Permian led to the formation of the Neo-Tethys Ocean. Then at the beginning of Triassic times, two short episodes of active rifting associated to the Siberian and Emeishan large igneous provinces (LIPs) failed. The true disintegration of Pangea resulted from (1) a Triassic passive rifting leading to the emplacement of the central Atlantic magmatic province (200 Ma) LIP and the subsequent opening of the central Atlantic Ocean during the lowermost Jurassic and from (2) a Lower Jurassic active rifting triggered by the Karoo-Ferrar LIP (183 Ma), which led to the opening of the West Indian Ocean. The same sequence of passive then active rifting is observed during the Lower Cretaceous with, in between, the Parana-Etendeka LIP at 135 Ma. We show that the relationships between the style of rifts and their breakdown or with the type of resulting margins (as magma poor or magma dominated) are not straightforward. Finally, we discuss the respective role of mantle global warming promoted by continental agglomeration and mantle plumes in the weakening of the continental lithosphere and their roles as rifting triggers.

151 citations


Journal ArticleDOI
Abstract: A detrital zircon U-Pb and Lu-Hf isotopic study was carried out in the Middle Silurian to Late Carboniferous sedimentary strata of the northwestern Tarim Craton in order to understand accretionary processes in the southern part of the Central Asian Orogenic Belt. Detrital zircons from these strata yielded U-Pb ages clustering around 2.8–2.3 Ga, 2.0–1.7 Ga, 1.3–0.9 Ga, 880–600 Ma, and 500–400 Ma, with age populations and Hf isotopic signatures matching those of magmatic rocks in the Tarim Craton and the Central Tianshan Block. Abundant 500–400 Ma detrital zircons most likely reflect deposition in a retroarc foreland basin inboard of an Andean-type magmatic arc to the north, supporting the northern Tarim-Central Tianshan connection during early Paleozoic time. The absence of 380–310 Ma zircon population in the Carboniferous siliciclastic rocks suggests that the Central Tianshan Block may have been separated from the Tarim Craton in the Early Devonian, caused by the interarc/back-arc opening of the South Tianshan Ocean. We propose an accretionary orogenic model switching from advancing to retreating mode during Paleozoic time in the southwestern part of the Paleo-Asian Ocean. This transition most likely occurred coevally with the rifting of Southeast Asian blocks from the northeastern margin of Gondwana.

133 citations


Journal ArticleDOI
TL;DR: In this article, Titanite grains from 60 igneous and metamorphic rocks were investigated with U-Pb + trace element petrochronology to constrain the timing and temperatures of crustal thickening and exhumation.
Abstract: ©2015. American Geophysical Union. All Rights Reserved. The Pamir Plateau, a result of the India-Asia collision, contains extensive exposures of Cenozoic middle to lower crust in domes exhumed by north-south crustal extension. Titanite grains from 60 igneous and metamorphic rocks were investigated with U-Pb + trace element petrochronology (including Zr thermometry) to constrain the timing and temperatures of crustal thickening and exhumation. Titanite from the Pamir domes records thickening from ∼44 to 25 Ma. Retrograde titanite from the Yazgulem, Sarez, and Muskol-Shatput domes records a transition from thickening to exhumation at ∼20-16 Ma, whereas titanite from the Shakhadara dome records prolonged exhumation from ∼20 to 8 Ma. The synchronous onset of exhumation may have been initiated by breakoff of the Indian slab and possible convective removal of the Asian lower crust and/or mantle lithosphere. The prolonged exhumation of the Shakhdara and Muztaghata-Kongur Shan domes may have been driven by continued rollback of the Asian lithosphere concurrent with shortening and northwestward translation of the Pamir Plateau.

100 citations


Journal ArticleDOI
TL;DR: In this article, the authors presented a new tectonic model for the evolution of NW Indian Ocean Subducted slab under the Carlsberg Ridge resulted from Arabia-India convergence.
Abstract: Gondwana breakup since the Jurassic and the northward motion of India toward Eurasia were associated with formation of ocean basins and ophiolite obduction between and onto the Indian and Arabian margins. Here we reconcile marine geophysical data from preserved oceanic basins with the age and location of ophiolites in NW India and SE Arabia and seismic tomography of the mantle below the NW Indian Ocean. The North Somali and proto-Owen basins formed due to 160-133-Ma N-S extension between India and Somalia. Subsequent convergence destroyed part of this crust, simultaneous with the uplift of the Masirah ophiolites. Most of the preserved crust in the Owen Basin may have formed between 84 and 74-Ma, whereas the Mascarene and the Amirante basins accommodated motion between India and Madagascar/East Africa between 85 and circa 60-Ma and 75 and circa 66-Ma, respectively. Between circa 84 and 45-Ma, oblique Arabia-India convergence culminated in ophiolite obduction onto SE Arabia and NW India and formed the Carlsberg slab in the lower mantle below the NW Indian Ocean. The NNE-SSW oriented slab may explain the anomalous bathymetry in the NW Indian Ocean and may be considered a paleolongitudinal constraint for absolute plate motion. NW India-Asia collision occurred at circa 20-Ma deforming the Sulaiman ranges or at 30-Ma if the Hindu Kush slab north of the Afghan block reflects intra-Asian subduction. Our study highlights that the NW India ophiolites have no relationship with India-Asia motion or collision but result from relative India-Africa/Arabia motions instead. Key Points We present a new tectonic model for the evolution of NW Indian Ocean Subducted slab under the Carlsberg Ridge resulted from Arabia-India convergence

94 citations


Journal ArticleDOI
TL;DR: In this paper, the authors studied the most distal Australian-Antarctic rifted margins and proposed a new interpretation, linking the sedimentary architectures to the nature and type of basement units, including hyperextended crust, exhumed mantle, embryonic, and steady state oceanic crusts.
Abstract: The processes related to hyperextension, exhumed mantle domains, lithospheric breakup, and formation of first unequivocal oceanic crust at magma-poor rifted margins are yet poorly understood. In this paper, we try to bring new constraints and new ideas about these latest deformation stages by studying the most distal Australian-Antarctic rifted margins. We propose a new interpretation, linking the sedimentary architectures to the nature and type of basement units, including hyperextended crust, exhumed mantle, embryonic, and steady state oceanic crusts. One major implication of our study is that terms like prerift, synrift, and postrift cannot be used in such polyphase settings, which also invalidates the concept of breakup unconformity. Integration and correlation of all available data, particular seismic and potential field data, allows us to propose a new model to explain the evolution of magma-poor distal rifted margins involving multiple and complex detachment systems. We propose that lithospheric breakup occurs after a phase of proto-oceanic crust formation, associated with a substantial magma supply. First steady state oceanic crust may therefore not have been emplaced before ~53.3 Ma corresponding to magnetic anomaly C24. Observations of magma amount and its distribution along the margins highlight a close magma-fault relationship during the development of these margins.

86 citations


Journal ArticleDOI
TL;DR: In this paper, the authors used an integrated approach merging potential fields and seismic data to explore crustal architecture across the Teisseyre-Tornquist Zone (TTZ) in central Poland.
Abstract: The Teisseyre-Tornquist Zone (TTZ) is generally regarded as a fossil plate boundary in Europe that extends 2000 km from the Baltic Sea to the Black Sea. We used an integrated approach merging potential fields and seismic data to explore crustal architecture across the TTZ in central Poland. The aim of the study was to test whether the TTZ coincides with an early Paleozoic (Caledonian) suture formed through the closure of the Tornquist Ocean along the SW Baltica margin. The suture is presumed to separate the East European Craton (EEC) from the Paleozoic terranes of Western Europe. Two seismic reflection lines from the PolandSPAN™ experiment were used to image the deep structure at the SW margin of the EEC. Lines PL-5300 and PL-5400 run NE-SW in central and northern Poland, respectively. The seismic interpretation down to top of basement was integrated with 2-D gravity and magnetic modeling to highlight the structure of the deep crust. Both the gravity and magnetic models show a suture that welds together two blocks at the base of crust. However, top of basement above the suture dips uniformly to the SW and is overlain by undisturbed lower Paleozoic and younger sediments. By implication, the suture must have developed in the Precambrian and both crustal blocks amalgamated belong to the EEC. Consequently, the Caledonian suture, formed by the closure of the Tornquist Ocean between Avalonia and Baltica, must be located farther southwest beneath thick upper Paleozoic and Mesozoic sediments.

85 citations


Journal ArticleDOI
TL;DR: In this paper, the authors showed that an 80 km wide domain of thin lower continental crust, the "Gulf of Lion metamorphic core complex" is present in the ocean-continent transition zone and exhumed mantle makes the transition with oceanic crust.
Abstract: Deep seismic profiles and subsidence history of the Gulf of Lion margin reveal an intense stretching of the distal margin and strong post-rift subsidence, despite weak extension of the onshore and shallow offshore portions of the margin. We revisit this evolution from the geological interpretation of an unpublished multi-channel seismic profile and other published geophysical data. We show that an 80 km-wide domain of thin lower continental crust, the “Gulf of Lion metamorphic core complex”, is present in the ocean-continent transition zone and exhumed mantle makes the transition with oceanic crust. The exhumed lower continental crust is bounded upward and downward by shallow north-dipping detachments. The presence of exhumed lower crust in the deep margin explains the discrepancy between the amount of extension deduced from normal faults in the upper crust and total extension. We discuss the mechanism responsible for exhumation and present two scenarios, a first one involving a simple coupling between mantle extension due to slab retreat and crustal extension, and a second one involving extraction of the lower crust and mantle from below the margin by the south-eastward flow of hot asthenosphere in the back-arc region during slab rollback. In both scenarios, the combination of Eocene crustal thickening related to the Pyrenees, the nearby volcanic arc and a shallow lithosphere-asthenosphere boundary weakened the upper mantle and lower crust enough to make them flow south-eastward. The overall hot geodynamic environment also explains the subaerial conditions during most of the rifting stage and the delayed subsidence after breakup.

83 citations


Journal ArticleDOI
TL;DR: In this paper, an oblique subduction model was proposed to describe the closure of the northeastern Paleo-Tethys Ocean during the Late Paleozoic to Early Mesozoic has been debated.
Abstract: A branch of the Paleo-Tethys Ocean once separated the north China plate from the south China plate. However, the mode of closure of the northeastern Paleo-Tethys Ocean during the Late Paleozoic to Early Mesozoic has been debated. One reason for this debate is that the collisional suture zone was later buried by large-scale thrust faults in the southern Qinling-Dabieshan orogen, which made it difficult to reconstruct the amalgamation of the supercontinent in central China. New regional geologic mapping provides stratigraphic and structural constraints on the mechanism of this ocean closure. Our results indicate that dextral transpressional suturing in the southern Qinling-Dabieshan foreland fold-thrust belt resulted in the formation of the northern Yangtze foreland basin, where the stratigraphy precisely shows the time-transgressive closure of the ocean, and the orogenic sediments shed over 1000 km westward from eastern China to the closing Paleo-Tethys. Therefore, we propose an oblique subduction model to describe the closure of the Paleo-Tethys Ocean. Our findings suggest that prolonged slab pull during the oblique subduction of the oceanic plate continued to drive deep continental subduction, thereby forming high- and ultrahigh-pressure metamorphic rocks and leading to sustained ocean closure.

81 citations


Journal ArticleDOI
TL;DR: In this paper, the main features of Jurassic strata in the Junggar Basin and neighboring areas were described, and possible mechanisms of Jurassic intraplate deformation in Central Asia were discussed.
Abstract: Mesozoic basins in northwest China provide important records for investigating relationships between intraplate deformation in Central Asia and tectonic processes at Asian boundaries. The present study, using well, seismic, outcrop, and thermochronology data in the Junggar Basin and neighboring areas, describes the main features of Jurassic strata in the basin, analyzes the Jurassic evolution of the basin and neighboring mountain belts, and discusses possible mechanisms of Jurassic intraplate deformation in Central Asia. During the Early-Middle Jurassic, episodic uplift of surrounding mountain belts kept the Junggar Basin a contractional closed basin, and alluvial fan, fluvial, delta, and lacustrine depositional environments successively developed from surrounding ranges to the central basin. During the Late Jurassic, the western and central parts of the basin were folded and uplifted, and deposition migrated mainly to the eastern basin. During the latest Jurassic-earliest Cretaceous, pre-Cretaceous strata in the eastern and northeastern Junggar Basin were folded and uplifted, and coarse-grained sediments were transported from surrounding uplifts to the central basin. We suggest that Jurassic episodic deformation events in the Junggar Basin and other areas of Central Asia are related to the Qiangtang collision during the Late Triassic-Early Jurassic, the closure of the western Mongol-Okhotsk Ocean at the Early/Middle Jurassic boundary, a collision of a microcontinent in the Pamir with the southern Asian margin during the late Middle Jurassic-early Late Jurassic, the collision of the Kolyma-Omolon Block with Siberia at the end of the Jurassic, and the subsequent closure of the eastern Mongol-Okhotsk Ocean during the latest Jurassic-earliest Cretaceous.

Journal ArticleDOI
TL;DR: In this article, the Apuseni, Banat, Timok, Panagyurishte and Eastern Srednogorie segments were combined with geochemical whole rock data to reconstruct the original arc geometry and better constrain its tectonic evolution.
Abstract: The Apuseni – Banat – Timok – Srednogorie (ABTS) Late Cretaceous magmatic arc in the Carpathian –Balkan orogen formed on the European margin during closure of the Neotethys Ocean. It was subsequently deformed into a complex orocline by continental collisions. The Cu-Au mineralised arc consists of geologically distinct segments: the Apuseni, Banat, Timok, Panagyurishte and Eastern Srednogorie segments. New U-Pb zircon ages and geochemical whole rock data for the Banat and Apuseni segments are combined with previously published data to reconstruct the original arc geometry and better constrain its tectonic evolution. Trace element and isotopic signatures of the arc magmas indicate a subduction-enriched source in all segments and variable contamination by continental crust. The magmatic arc was active for 25 m.y. (~92-67 Ma). Across-arc age trends of progressively younger ages towards the inferred paleo-trench indicate gradual steepening of the subducting slab away from the upper plate European margin. This leads to asthenospheric corner flow in the overriding plate, which is recorded by decreasing 87Sr/86Sr (0.70577 to 0.70373) and increasing 143Nd/144Nd (0.51234 to 0.51264) ratios over time in some segments. The close spatial relationship between arc magmatism, large-scale shear zones and related strike-slip sedimentary basins in the Timok and Pangyurishte segments indicates mild transtension in these central segments of the restored arc. In contrast, the Eastern Srednogorie segment underwent strong orthogonal intra-arc extension. Segmental distribution of tectonic stress may account for the concentration of rich porphyry Cu deposits in the transtensional segments, where lower-crustal magma storage and fractionation favoured the evolution of volatile-rich magmas.

Journal ArticleDOI
TL;DR: In this article, a reconstruction of the Ordovician-Devonian Appalachian orogen in the Maritime Provinces of Atlantic Canada is presented, based on a restored post-Acadian paleogeography.
Abstract: Major late Paleozoic faults, many with documented strike-slip motion, have dissected the Ordovician-Devonian Appalachian orogen in the Maritime Provinces of Atlantic Canada. Activity alternated between east-west faults (Minas trend) and NE-SW faults (Appalachian trend). NW-SE faults (Canso trend) were probably conjugate to Minas-trend faults. Major dextral movement, on faults with Appalachian trend, in total between 200 and 300 km, began in the Late Devonian. This movement initiated the Maritimes Basin in a transtensional environment at a releasing bend formed around a promontory in the Laurentian margin and thinned the crust, accounting for the major subsidence of the basin. Appalachian-trend strike slip continued in the Mississippian but was accompanied by major movement on E-W Minas-trend faults culminating around the Mississippian-Pennsylvanian boundary, juxtaposing the Meguma and Avalon terranes of the Appalachians close to their present-day configuration. However, strike slip continued during the Pennsylvanian-Permian interval resulting in transpressional deformation that reactivated and inverted earlier extensional faults. A final major episode of transtension, mainly sinistral, occurred during the Mesozoic opening of the Atlantic Ocean. Restoration of movements on these faults, amounting to several hundred kilometers of slip, explains anomalies in the present-day distribution of terranes amalgamated during early Paleozoic Appalachian tectonism. In the restored geometry, the Nashoba and Ellsworth terranes of Ganderia are adjacent to one another, and the Meguma terrane lies clearly outboard of Avalonia. A restored post-Acadian paleogeography, not the present-day geometry of the orogen, should be used as a basis for reconstructions of its earlier Paleozoic history.

Journal ArticleDOI
TL;DR: In this paper, aeromagnetic data from the entire oceanic Norway Basin was used to study the structure of conjugate volcanic (rifted) margins and the spreading evolution of the Norway Basin from the Early Eocene breakup time to the Late Oligocene when the Aegir Ridge became extinct.
Abstract: We have acquired and processed new aeromagnetic data that cover the entire oceanic Norway Basin located between the More volcanic rifted margin and the Jan Mayen microcontinent (JMMC). The new compilation allows us to revisit the structure of the conjugate volcanic (rifted) margins and the spreading evolution of the Norway Basin from the Early Eocene breakup time to the Late Oligocene when the Aegir Ridge became extinct. The volcanic margins (in a strict sense) that formed before the opening of the Norway Basin have been disconnected with the previous Jurassic-Mid-Cretaceous episode of crustal thinning. We also show evidence of relationships between the margin architecture, the breakup magmatism distribution along the continent-oceanic transition, and the subsequent oceanic segmentation. The Norway Basin shows a complex system of asymmetric oceanic segments locally affected by episodic ridge jumps. The new aeromagnetic compilation also confirms that a fan-shaped spreading evolution of the Norway Basin was clearly active before the cessation of seafloor spreading and extinction of the Aegir Ridge. An important Mid-Eocene kinematic event at around magnetic chron C21r can be recognized in the Norway Basin. This event coincides with the onset of diking and increasing rifting activity (and possible oceanic accretion?) between the proto-JMMC and the East Greenland margin. It led to a second phase of breakup and microcontinent formation in the Norwegian-Greenland Sea ~26 Myrs later in the Oligocene.

Journal ArticleDOI
TL;DR: In this article, the current stress field in the Maghrebides chain (from Tunisia to Sicily) and its foreland was analyzed and compared with the neotectonic stress field determined by others from fault slip data.
Abstract: We compiled 123 focal mechanisms from various sources for Tunisia and adjacent regions up to Sicily, to image the current stress field in the Maghrebides chain (from Tunisia to Sicily) and its foreland. Stress inversion of all the available data provides a first-order stress field with a N150°E horizontal compression (SHmax) and a transpressional tectonic regime, but the obtained stress tensor poorly fit to the data set. We separated them into regional subsets (boxes) in function of their geographical proximity, kinematic regime, homogeneity of kinematic orientations, and tectonic setting. Their respective inversion evidences second- and third-order spatial variations in tectonic regime and horizontal stress directions. The stress field gradually changes from compression in the Maghrebides thrust belt to transpression and strike slip in the Atlassic and Pelagian foreland, respectively, where preexisting NW-SE to E-W deep faults system are reactivated. This spatial variation of the sismotectonic stress field and tectonic regime is consistent with the neotectonic stress field determined by others from fault slip data. The major Slab Transfer Edge Propagator faults (i.e., North-South Axis-Hammamet relay and Malte Escarpment), which laterally delimit the subducting slabs, play an active role in second- and third-order lateral variations of the tectonic regime and stress field orientations over the Tunisian/Sicilian domain. The past and current tectonic deformations and kinematics of the central Mediterranean are subordinately guided by the plate convergence (i.e., Africa-Eurasia), controlled or influenced by lateral slab migration/segmentation and by deep dynamics such as lithosphere-mantle interaction.

Journal ArticleDOI
TL;DR: In this paper, the authors focused on an east-west trending belt of granitic to intermediate intrusions and their volcanic cover in the northern Dur Kan Complex, a continental slice outcropping to the north of the exposed Makran accretionary wedge in southeastern Iran.
Abstract: This study focuses on an east-west trending belt of granitic to intermediate intrusions and their volcanic cover in the northern Dur Kan Complex, a continental slice outcropping to the north of the exposed Makran accretionary wedge in southeastern Iran. Field observations, petrographic descriptions, trace element, and isotope analyses combined with U-Pb zircon geochronology are presented to determine the time frame of magmatism and tectonic setting during the formation of these rocks. Results document three magmatic episodes with different melt sources for (1) granites, (2) a diorite-trondhjemite-plagiogranite sequence, and (3) diabases and lavas. Granites, dated at 170–175 Ma, represent crystallized melt with a strong continental isotopic contribution. The diorite-trondhjemite-plagiogranite sequence is 165–153 Ma old and derives from a mantle magma source with minor continental contribution. East-west trending diabase dikes and bodies intruded the granitoids, which were eroded and then covered by Valanginian (140–133 Ma) alkaline lavas and sediments. Alkaline dikes and lavas have a mantle isotopic composition. Temporal correlation with plutonites of the Sanandaj-Sirjan Zone to the northwest defines a narrow, NW-SE striking and nearly 2000 km long belt of Jurassic intrusions. The increasing mantle influence in the magma sources is explained by thinning of continental lithosphere and related mantle upwelling/decompression melting. Accordingly, the formation of the studied igneous rocks is related to the extension of the Iranian continental margin, which ultimately led to the formation of the Tethys-related North Makran Ophiolites.

Journal ArticleDOI
TL;DR: The Bieertuokuoyi piggyback basin provides an unambiguous record of the outward growth of the northeast Pamir margin in northwest China from the Miocene through the Quaternary.
Abstract: ©2015. American Geophysical Union. Piggyback basins on the margins of growing orogens commonly serve as sensitive recorders of the onset of thrust deformation and changes in source areas. The Bieertuokuoyi piggyback basin, located in the hanging wall of the Pamir Frontal Thrust, provides an unambiguous record of the outward growth of the northeast Pamir margin in northwest China from the Miocene through the Quaternary. To reconstruct the deformation along the margin, we synthesized structural mapping, stratigraphy, magnetostratigraphy, and cosmogenic burial dating of basin fill and growth strata. The Bieertuokuoyi basin records the initiation of the Pamir Frontal Thrust and the Takegai Thrust ~5-6Ma, as well as clast provenance and paleocurrent changes resulting from the Pliocene-to-Recent uplift and exhumation of the Pamir to the south. Our results show that coeval deformation was accommodated on the major structures on the northeast Pamir margin throughout the Miocene to Recent. Furthermore, our data support a change in the regional kinematics around the Miocene-Pliocene boundary (~5-6Ma). Rapid exhumation of NE Pamir extensional domes, coupled with cessation of the Kashgar-Yecheng Transfer System on the eastern margin of the Pamir, accelerated the outward propagation of the northeastern Pamir margin and the southward propagation of the Kashi-Atushi fold-and-thrust belt in the southern Tian Shan. This coeval deformation signifies the coupling of the Pamir and Tarim blocks and the transfer of shortening north to the Pamir frontal faults and across the quasi-rigid Tarim Basin to the southern Tian Shan Kashi-Atushi fold-and-thrust system.

Journal ArticleDOI
TL;DR: In this article, the authors perform studies of volcanic cone density and rift obliquity along strike in the Main Ethiopian Rift (MER) in East Africa, and synthesize these new data in light of existing geophysical, geochemical and petrological constraints on magma generation and emplacement.
Abstract: The geological record at rifts and margins worldwide often reveals considerable along-strike variations in volumes of extruded and intruded igneous rocks. These variations may be the result of asthenospheric heterogeneity, variations in rate and timing of extension; alternatively, pre-existing plate architecture and/or the evolving kinematics of extension during breakup may exert first order control on magmatism. The Main Ethiopian Rift (MER) in East Africa provides an excellent opportunity to address this dichotomy: it exposes, along-strike, several sectors of asynchronous rift development from continental rifting in the south to incipient oceanic spreading in the north. Here we perform studies of volcanic cone density and rift obliquity along strike in the MER. By synthesizing these new data in light of existing geophysical, geochemical and petrological constraints on magma generation and emplacement, we are able to discriminate between tectonic and mantle geodynamic controls on the geological record of a newly forming magmatic rifted margin. The timing of rift sector development, the three-dimensional focusing of melt, and the ponding of plume material where the rift dramatically narrows, each influence igneous intrusion and volcanism along the MER. However, rifting obliquity plays an important role in localizing intrusion into the crust beneath en-echelon volcanic segments. Along-strike variations in volumes and types of igneous rocks found at rifted margins thus likely carry information about the development of strain during rifting, as well as the physical state of the convecting mantle at the time of breakup.

Journal ArticleDOI
TL;DR: In this article, the authors use seismic reflection and bathymetric data to investigate the tectonic evolution of the offshore branch of the Cenozoic East African Rift System (EARS).
Abstract: The Cenozoic East African Rift System (EARS) extends from the Red Sea to Mozambique. Here we use seismic reflection and bathymetric data to investigate the tectonic evolution of the offshore branch of the EARS. The data indicate multiple and time transgressive neotectonic deformations along ~800km of the continental margin of northern Mozambique. We observe a transition from a mature rift basin in the north to a juvenile fault zone in the south. The respective timing of deformation is derived from detailed seismic stratigraphy. In the north, a ~30km wide and more than 150km long, N-S striking symmetric graben initiated as half-graben in the late Miocene. Extension accelerated in the Pliocene, causing a continuous conjugate border fault and symmetric rift graben. Coevally, the rift started to propagate southward, which resulted in a present-day ~30km wide half-graben, approximately 200km farther south. Since the Pleistocene, the rift has continued to propagate another ~300km, where the incipient rift is reflected by subrecent small-scale normal faulting. Estimates of the overall brittle extension of the matured rift range between 5 and 12km, with an along-strike southward decrease of the extension rate. The offshore portion of the EARS evolves magma poor, similar to the onshore western branch. The structural evolution of the offshore EARS is suggested to be related to and controlled by differing inherited lithospheric fabrics. Preexisting fabrics may not only guide and focus extension but also control rift architecture.

Journal ArticleDOI
TL;DR: In this paper, the structure of the most external thrust belt of the Alps between the Rhein valley and Salzburg is reviewed based on a new tectonic map and the interpretation of seismic sections.
Abstract: In this paper we review the structure of the most external thrust belt of the Alps between the Rhein valley and Salzburg based on a new tectonic map and the (re)interpretation of seismic sections. Specifically we address the correlation between deformation in the Subalpine Molasse and the Alpine thrust belt in general and focus on the control of sedimentary facies on the structural style. A dramatic change in architecture from a ramp-flat structure to buckle folding is related to a change from coarse-grained fans to fine-grained deposits within the Subalpine Molasse. Additionally the interaction of escape tectonics with postcollisional shortening controls the decrease of late Early Miocene and younger shortening within the Subalpine Molasse from 50 km near the Rhine valley to almost zero near Salzburg. Transfer of shortening into the hinterland, which is the zone of lateral escape, ended foreland propagation of the Alpine thrusts and initiated a general break-back sequence of thrusting. Throughout this time the thrusts remained active. In such a scenario, tectonic units on top of the Subalpine Molasse are expected to undergo clockwise rotation around vertical axes. As thrusting in the Subalpine Molasse is closely related to contemporaneous transport and shortening within the tectonically higher Helvetic thrust sheets, amounts of Miocene differential shortening and related clockwise vertical axis rotation are minimum amounts. True clockwise vertical axis rotation is probably larger than the 12° deduced from the Subalpine Molasse thrust belt.

Journal ArticleDOI
TL;DR: In this article, the evolution of the Amiran and Mesopotamian flexural basins of the Zagros belt is approached by coupled 2D forward modeling of orogenic wedge formation, lithospheric flexural isostasy, and stream power erosion/transport/sedimentation.
Abstract: The evolution of the Amiran and Mesopotamian flexural basins of the Zagros belt is approached by coupled 2-D forward modeling of orogenic wedge formation, lithospheric flexural isostasy, and stream power erosion/transport/sedimentation. Thrust geometries and sequence of emplacement derived from geometric and kinematic models presented here are the inputs to our evolutionary model, constrained by basin geometry, sediment volume, and topography. Modeling results confirm that the Zagros flexural basins evolution is consistent with two stages of deformation: (1) the obduction stage involving the Kermanshah accretionary complex and a basement unit and (2) the collision stage, emplacing the Gaveh Rud and Sanandaj-Sirjan domains in the hinterland and forming a basement duplex in the outer part. Results provide quantitative insights into processes involved in mountain and basin building. The lithospheric equivalent elastic thickness (Te) changed from 20 km during the Amiran stage (~90–50 Ma) to 55 km during the Mesopotamian subsidence stage (last 20 Myr). The Amiran basin results from flexure of the Arabian plate below the load of the Kermanshah cover and basement thrust sheets. During this stage, material eroded in the inner parts was enough to fill the flexural trough. The Mesopotamian basin formed in front of the outermost basement units flexing the Arabian plate. During this latter stage, material eroded from the orogenic wedge was not enough to fill the Mesopotamian basin. An additional longitudinal sediment supply of up to 200 m/Myr is required to fill the flexural basin.

Journal ArticleDOI
TL;DR: In this article, the authors apply a 2D thermokinematic model to a forward modeled balanced cross section to quantify the cooling history in fold-thrust belt settings, which provides a kinematic path of rocks and structures necessary to reproduce the surface geology.
Abstract: Advancements in thermochronology and numerical modeling offer the potential to associate the age of thermochronometric samples to both exhumational and deformational processes. However, understanding how these components are related in compressional systems requires linking the geometry and magnitude of fault slip to the distribution and amount of erosion. To address this, we apply a 2-D thermokinematic model to a forward modeled balanced cross section to quantify the cooling history in fold-thrust belt settings. The restored cross section provides a kinematic path of rocks and structures necessary to reproduce the surface geology. By assigning ages to displacement amounts, we produced a range of potential velocity vectors used to calculate heat transport, erosion, and rock cooling. We test the predicted ages against a suite of previously published thermochronometric data from the Bhutan Himalaya to explore the utility of the data to constrain the timing, rate, and geometry of fault motion as well as variations in the exhumation rate. We evaluate the cooling history associated with a constant rate of shortening of 18 mm/yr, rates that are 2.0, 1.5, 0.75, and 0.5 times the constant rate, and rates that vary with time to determine which kinematic history best matches the measured cooling ages. The combination of relatively old apatite fission track and zircon (U-Th)/He measured ages and younger (15–9 Ma) 40Ar/39Ar ages from white mica is best matched with faster rates (relative to constant rates) between 11.5 and 8 Ma and slower than constant rates from 17 to 11.5 Ma and 8 Ma to present.

Journal ArticleDOI
TL;DR: In this paper, a combined structural, geochemical, and geochronologic study of the Shyok suture zone (SSZ) is presented as it is exposed in the Nubra region of India to test two competing hypotheses: that the SSZ is of Late Cretaceous or alternatively of Eocene age.
Abstract: A precise age for the collision of the Kohistan-Ladakh block with Eurasia along the Shyok suture zone (SSZ) is one key to understanding the accretionary history of Tibet and the tectonics of Eurasia during the India-Eurasia collision. Knowing the age of the SSZ also allows the suture to be used as a piercing line for calculating total offset along the Karakoram Fault, which effectively represents the SE border of the Tibetan Plateau and has played a major role in plateau evolution. We present a combined structural, geochemical, and geochronologic study of the SSZ as it is exposed in the Nubra region of India to test two competing hypotheses: that the SSZ is of Late Cretaceous or, alternatively, of Eocene age. Coarse-continental strata of the Saltoro Molasse, mapped in this area, contain detrital zircon populations suggestive of derivation from Eurasia despite the fact that the molasse itself is deposited unconformably onto Kohistan-Ladakh rocks, indicating that the molasse is postcollisional. The youngest population of detrital zircons in these rocks (approximately 92 Ma) and a U/Pb zircon date for a dike that cuts basal molasse outcrops (approximately 85 Ma) imply that deposition of the succession began in the Late Cretaceous. This establishes a minimum age for the SSZ and rules out the possibility of an Eocene collision between Kohistan-Ladakh and Eurasia. Our results support correlation of the SSZ with the Bangong suture zone in Tibet, which implies a total offset across the Karakoram Fault of approximately 130–190 km.

Journal ArticleDOI
TL;DR: The Yong'an Basin this article preserves a Permian-Jurassic, marine to continental, siliciclastic-dominated, retroarc foreland basin succession.
Abstract: Northeast trending Yong'an Basin, southeast South China Craton, preserves a Permian-Jurassic, marine to continental, siliciclastic-dominated, retroarc foreland basin succession. Modal and detrital zircon data, along with published paleocurrent data, sedimentary facies, and euhedral to subhedral detrital zircon shapes, indicate derivation from multicomponent, nearby sources with input from both the interior of the craton to the northwest and from an inferred arc accretionary complex to the southeast. The detrital zircon U-Pb age spectra range in age from Archean to early Mesozoic, with major age groups at 2000–1700 Ma, 1200–900 Ma, 400–340 Ma, and 300–240 Ma. In addition, Early Jurassic strata include zircon detritus with ages of 200–170 Ma. Regional geological relations suggest that Precambrian and Early Paleozoic detritus was derived from the inland Wuyi Mountain region and Yunkai Massif of the South China Craton. Sources for Middle Paleozoic to early Mesozoic detrital zircons include input from beyond the currently exposed China mainland. Paleogeographic reconstruction in East Asia suggests derivation from an active convergent plate margin along the southeastern rim of the craton that incorporated part of Southwest Japan and is related to the subduction of the Paleo-Pacific Ocean. Integration of the geologic and provenance records of the Yong'an Basin with the time equivalent Yongjiang and Shiwandashan basins that lie to the southwest and south, respectively, provides an integrated record of the subduction of the Paleo-Pacific Ocean along the southeast margin of the South China Craton and termination of subduction of the Paleo-Tethys beneath its southwest margin in Permo-Triassic.

Journal ArticleDOI
TL;DR: In this paper, a 500 km long regional balanced section has been constructed across the eastern Andean wedge, using fieldwork, industrial seismic sections, and wells, which is characterized by a thin-skinned thrust system involving the Eastern Cordillera (EC), the sub-Andean zone (SAZ), and the Maranon foredeep.
Abstract: In northern Peru, a 500 km long regional balanced section has been constructed across the eastern Andean wedge, using fieldwork, industrial seismic sections, and wells. The structure is characterized by a thin-skinned thrust system involving the Eastern Cordillera (EC), the sub-Andean zone (SAZ), and the Maranon foredeep. In the SAZ and the easternmost foredeep the development of the thrust system has been driven by the combination of two structural events. Permian thrust faults had been reactivated to form a basement duplex underlying the SAZ and the foredeep. At the same time a Triassic-Jurassic extensional basin has been transported as a crustal ramp anticline on to the duplex roof fault, giving rise to the EC. The impingement of the EC was responsible for the deformation of the SAZ and the propagation of the thrust wedge. The minimum shortening calculated is 142 km, representing a shortening strain of ~ −28%. A sequential restoration calibrated by (U-Th)/He and Fission Track dating on apatites and vitrinite reflectance values shows that shortening rates vary from 7.1 mm yr−1 between 17 and 8 Ma to 3.6 mm yr−1 between 8 Ma and today and suggests that the thrust wedge commenced propagation between 30 and 24 Ma. When compared with other Andean thrust wedges, we suggest that the timing of the thrust wedge propagation is not a simple function of the distance to the hinge of the Bolivian orocline and the propagation is not controlled by the precipitation regime. We rather suggest that reactivated basement faults favored thrust wedge propagation.

Journal ArticleDOI
TL;DR: In this paper, the authors examined the influence of inherited lithospheric heterogeneity and kinematics in the segmentation of largely amagmatic continental rifts and found that the Malawi Rift can be hierarchically divided into first-and second-order segments.
Abstract: We used detailed analysis of Shuttle Radar Topography Mission-digital elevation model and observations from aeromagnetic data to examine the influence of inherited lithospheric heterogeneity and kinematics in the segmentation of largely amagmatic continental rifts. We focused on the Cenozoic Malawi Rift, which represents the southern extension of the Western Branch of the East African Rift System. This north trending rift traverses Precambrian and Paleozoic-Mesozoic structures of different orientations. We found that the rift can be hierarchically divided into first-order and second-order segments. In the first-order segmentation, we divided the rift into Northern, Central, and Southern sections. In its Northern Section, the rift follows Paleoproterozoic and Neoproterozoic terrains with structural grain that favored the localization of extension within well-developed border faults. The Central Section occurs within Mesoproterozoic-Neoproterozoic terrain with regional structures oblique to the rift extent. We propose that the lack of inherited lithospheric heterogeneity favoring extension localization resulted in the development of the rift in this section as a shallow graben with undeveloped border faults. In the Southern Section, Mesoproterozoic-Neoproterozoic rocks were reactivated and developed the border faults. In the second-order segmentation, only observed in the Northern Section, we divided the section into five segments that approximate four half-grabens/asymmetrical grabens with alternating polarities. The change of polarity coincides with flip-over full-grabens occurring within overlap zones associated with ~150 km long alternating border faults segments. The inherited lithospheric heterogeneity played the major role in facilitating the segmentation of the Malawi Rift during its opening resulting from extension.

Journal ArticleDOI
TL;DR: In this article, the authors investigated the conditions and physical processes that promoted slip to the Tohoku-oki earthquake trench and found that the plate boundary decollement is localized onto an interval of smectite-rich, pelagic clay.
Abstract: The 2011 Mw9.0 Tohoku-oki earthquake ruptured to the trench with maximum coseismic slip located on the shallow portion of the plate boundary fault. To investigate the conditions and physical processes that promoted slip to the trench, Integrated Ocean Drilling Program Expedition 343/343T sailed 1 year after the earthquake and drilled into the plate boundary ∼7 km landward of the trench, in the region of maximum slip. Core analyses show that the plate boundary decollement is localized onto an interval of smectite-rich, pelagic clay. Subsidiary structures are present in both the upper and lower plates, which define a fault zone ∼5–15m thick. Fault rocks recovered from within the clay-rich interval contain a pervasive scaly fabric defined by anastomosing, polished, and lineated surfaces with two predominant orientations. The scaly fabric is crosscut in several places by discrete contacts across which the scaly fabric is truncated and rotated, or different rocks are juxtaposed. These contacts are inferred to be faults. The plate boundary decollement therefore contains structures resulting from both distributed and localized deformation. We infer that the formation of both of these types of structures is controlled by the frictional properties of the clay: the distributed scaly fabric formed at low strain rates associated with velocity-strengthening frictional behavior, and the localized faults formed at high strain rates characterized by velocity-weakening behavior. The presence of multiple discrete faults resulting from seismic slip within the decollement suggests that rupture to the trench may be characteristic of this margin.

Journal ArticleDOI
TL;DR: In this paper, the authors used U-Th-Pb monazite ages, compositions, and metamorphic pressure-temperature determinations from rocks directly beneath the Main Central Thrust (MCT) to calculate the minimum rate of movement on a major ductile fault zone, the MCT, by a novel methodology.
Abstract: Quantitative constraints on the rates of tectonic processes underpin our understanding of the mechanisms that form mountains. In the Sikkim Himalaya, late structural doming has revealed time-transgressive evidence of metamorphism and thrusting that permit calculation of the minimum rate of movement on a major ductile fault zone, the Main Central Thrust (MCT), by a novel methodology. U-Th-Pb monazite ages, compositions, and metamorphic pressure-temperature determinations from rocks directly beneath the MCT reveal that samples from ~50 km along the transport direction of the thrust experienced similar prograde, peak, and retrograde metamorphic conditions at different times. In the southern, frontal edge of the thrust zone, the rocks were buried to conditions of ~550°C and 0.8 GPa between ~21 and 18 Ma along the prograde path. Peak metamorphic conditions of ~650°C and 0.8–1.0 GPa were subsequently reached as this footwall material was underplated to the hanging wall at ~17–14 Ma. This same process occurred at analogous metamorphic conditions between ~18–16 Ma and 14.5–13 Ma in the midsection of the thrust zone and between ~13 Ma and 12 Ma in the northern, rear edge of the thrust zone. Northward younging muscovite 40Ar/39Ar ages are consistently ~4 Ma younger than the youngest monazite ages for equivalent samples. By combining the geochronological data with the >50 km minimum distance separating samples along the transport axis, a minimum average thrusting rate of 10 ± 3 mm yr−1 can be calculated. This provides a minimum constraint on the amount of Miocene India-Asia convergence that was accommodated along the MCT.

Journal ArticleDOI
TL;DR: In this article, structural fabrics and the geochronology of the high-grade shear zones within the Palghat-Cauvery Shear System, PCSS system were investigated and it was shown that the Moyar-Salem-Attur shear zone is early Paleoproterozoic in age and associated with dextral strike-slip motion.
Abstract: Gondwana amalgamated along a suite of Himalayan-scale collisional orogens, the roots of which lace the continents of Africa, South America, and Antarctica. The Southern Granulite Terrane of India is a generally well-exposed, exhumed, Gondwana-forming orogen that preserves a record of the tectonic evolution of the eastern margin of the East African Orogen during the Ediacaran-Cambrian (circa 600–500 Ma) as central Gondwana formed. The deformation associated with the closure of the Mozambique Ocean and collision of the Indian and East African/Madagascan cratonic domains is believed to have taken place along the southern margin of the Salem Block (the Palghat-Cauvery Shear System, PCSS) in the Southern Granulite Terrane. Investigation of the structural fabrics and the geochronology of the high-grade shear zones within the PCSS system shows that the Moyar-Salem-Attur shear zone to the north of the PCSS system is early Paleoproterozoic in age and associated with dextral strike-slip motion, while the Cauvery shear zone (CSZ) to the south of the PCSS system can be loosely constrained to circa 740–550 Ma and is associated with dip-slip dextral transpression and north side-up motion. To the south of the proposed suture zone (the Cauvery shear zone), the structural fabrics of the Northern Madurai Block suggest four deformational events (D1–D4), some of which are likely to be contemporaneous. The timing of high pressure-ultrahigh temperature metamorphism and deformation (D1–D3) in the Madurai Block (here interpreted as the southern extension of Azania) is constrained to circa 550–500 Ma and interpreted as representing collisional orogeny and subsequent orogenic collapse of the eastern margin of the East African Orogen. The disparity in the nature of the structural fabrics and the timing of the deformation in the Salem and the Madurai Blocks suggest that the two experienced distinct tectonothermal events prior to their amalgamation along the Cauvery shear zone during the Ediacaran/Cambrian.