Showing papers in "Transactions of The Indian Ceramic Society in 2021"
TL;DR: In this article, two different coloured ceramic pigments, blue green and black, were prepared by using solid phase reaction method from calcined leather waste and industrial grade metal oxides.
Abstract: Two different coloured ceramic pigments, blue-green and black, were prepared by using solid phase reaction method from calcined leather waste and industrial grade metal oxides. Chemical composition...
7 citations
TL;DR: In this paper, different membrane processes for the removal of arsenic from groundwater were reviewed and the source of arsenic and its toxic effects on human body were illustrated, and various membrane filtration methods were discussed.
Abstract: This article reviews different membrane processes for the removal of arsenic from groundwater. The source of arsenic and its toxic effects on human body are illustrated. Various membrane filtration...
7 citations
TL;DR: A solution of Al(NO3)3.9H2O and NaOH was used to perform Mg-Al LDH plugging treatment on the LA103Z magnesium-lithium alloy micro-arc oxidation ceramic layer as mentioned in this paper.
Abstract: A solution of Al(NO3)3.9H2O and NaOH was used to perform Mg-Al LDH plugging treatment on the LA103Z magnesium-lithium alloy micro-arc oxidation ceramic layer. The effect of treatment temperature on...
7 citations
TL;DR: In this paper, a noble technique to enhance tribological characteristics of zirconia toughened alumina (ZTA) composite by adding 10 wt% nano CaF2 (∼50 nm) via chemic...
Abstract: This work was carried out to establish a noble technique to enhance tribological characteristics of zirconia toughened alumina (ZTA) ceramic composite by adding 10 wt% nano CaF2 (∼50 nm) via chemic...
5 citations
TL;DR: With SiC as starting powder, waste fly ash as sintering additive and metal oxide as catalyst, mullite bonded SiC ceramic membrane was prepared at 1000°C using the conventional solid-state reaction as discussed by the authors.
Abstract: With SiC as starting powder, waste fly ash as sintering additive and metal oxide as catalyst, mullite bonded SiC ceramic membrane was prepared at 1000°C using the conventional solid-state reaction ...
4 citations
TL;DR: In this article, the authors proposed a polymer/ceramic composites with high dielectric permittivity for use in microelectronics, capacitors and related fields.
Abstract: Materials with high dielectric permittivity are in demand due to their potential applications in microelectronics, capacitors and related fields. Polymer/ceramic composites, due to their improved p...
3 citations
TL;DR: In this paper, the effect of membrane thickness with respect to gas permeance and tensile strength was studied. But the authors focused on the tensile properties of the membrane rather than the permeability of the gas.
Abstract: The aim of this work is to study the effect of membrane thickness with respect to gas permeance and tensile strength. The influence of membrane thickness on gas permeation has received little atten...
3 citations
TL;DR: In this article, a flat circular ceramic membrane (53 mm diameter and 5 mm thick) by paste casting method from locally available Kashmir clay was reported, and the membrane was obta...
Abstract: In this work, we have reported the preparation of a flat circular ceramic membrane (53 mm diameter and 5 mm thick) by paste casting method from locally available Kashmir clay. The membrane was obta...
3 citations
TL;DR: In this article, the microstructure, crystal structure, dielectric and piezoelectric behavior of 0.1Pb[Fe 1/2Nb1/2]O3
Abstract: This study describes the microstructure, crystal structure, dielectric and piezoelectric behavior of 0.1Pb[Fe1/2Nb1/2]O3-0.9Pb[ZrxTi(1–x)]O3 (x = 0.49-0.55) ceramics synthesized by solid-state reac...
2 citations
TL;DR: In this article, the yttrium orthovanadate (YVO4) nanopowder has been synthesized via solution combustion route using citric acid as fuel, and the primary aim is to establish a facile solution combusti...
Abstract: In the present work, yttrium orthovanadate (YVO4) nanopowder has been synthesized via solution combustion route using citric acid as fuel. The primary aim is to establish a facile solution combusti...
2 citations
TL;DR: In this paper, 27R-SiAlON is studied in terms of crystallographic and microscopic features by detailed X-ray diffraction and electron microscopy experim... and it is shown that it can be synthesized in a laboratory synthesized (carbothermal-reduction-nitridation).
Abstract: Laboratory synthesized (carbothermal-reduction-nitridation) 27R-SiAlON is studied in terms of crystallographic and microscopic features by detailed X-ray diffraction and electron microscopy experim...
TL;DR: Plasma spray grade Al2O3-13TiO2 and ZrO2 powders were blended physically in different proportions (80 wt% Al 2O 3-13 TiO2 + 20 wt%) as mentioned in this paper.
Abstract: Plasma spray grade Al2O3-13TiO2 and ZrO2 powders were blended physically in different proportions (80 wt% Al2O3-13TiO2 + 20 wt% ZrO2, 20 wt% Al2O3-13TiO2 + 80 wt% ZrO2 and 50 wt% Al2O3-13TiO2 + 50 ...
TL;DR: Radiation shielding window (RSW) glass for nuclear reactor is primarily required for protecting the operating personnel from harmful radioactive rays produced during nuclear energy generation in nuclear power generation in this article.
Abstract: Radiation shielding window (RSW) glass for nuclear reactor is primarily required for protecting the operating personnel from harmful radioactive rays produced during nuclear energy generation in nu...
TL;DR: Mullite ceramics were synthesized using boehmite (-AlOOH) as alumina source and polymethysilsesquioxanes (PMS) as silica source.
Abstract: Mullite ceramics was synthesized using boehmite (-AlOOH) as alumina source and polymethysilsesquioxanes (PMS), a novel class of preceramic polymer, as silica source Quantitative mullitization was
TL;DR: In this article, the effects of labware glass cullet on the properties of porcelain stoneware tiles were reported, and five formulations of the tile were tested with five formulations: 0, 3, 6, 9, 12% borosilicate glass.
Abstract: This study reported the effects of labware glass cullet on the properties of porcelain stoneware tiles. Five formulations of porcelain stoneware tiles (containing 0, 3, 6, 9, 12% borosilicate glass...
TL;DR: In this paper, the effects of AlN and sintering atmospheres on the thermal properties and microstructure evolution of SiC ceramics were investigated and the authors reported the effect of the AlN on SiC micro-structures.
Abstract: In pursuit of high thermal conductivity of SiC ceramics, this article reports the effects of AlN and sintering atmospheres on the thermal properties and microstructure evolution of SiC ceramics. De...
TL;DR: A series of Samarium (Sm) doped borosilicate glass was designed and prepared by melt-quenching method to realize controllable and adjustable red emission for further applications of rare-earth... as mentioned in this paper.
Abstract: A series of Samarium (Sm) doped borosilicate glass was designed and prepared by melt-quenching method to realize the controllable and adjustable red emission for further applications of rare-earth ...
TL;DR: Nanocrystalline spinel forming precursor spinel hydrate (PSH) prepared by co-precipitation technique with controlled concentration of mixed salt, pH, temperature and time, was used as additive in this paper.
Abstract: Nanocrystalline spinel forming precursor spinel hydrate (PSH), prepared by co-precipitation technique with controlled concentration of mixed salt, pH, temperature and time, was used as additive in ...
TL;DR: In this article, solid solutions have been synthesized by doping of Co3+ at the Fe3+ site using solid-state reaction method, and the prepared solid solutions were shown to be stable.
Abstract: Bi0.9Nd0. 1Fe1–xCoxO3 (x = 0.025, 0.050, 0.075 and 0.1) solid solutions have been synthesized by doping of Co3+ at the Fe3+ site using solid-state reaction method. The prepared solid solutions have...
TL;DR: A lead-free multiferroic double perovskite BiHoNiTiO6 (BHNT) was prepared at high temperature following mixed oxide solid state reaction mechanism.
Abstract: A lead-free multiferroic double perovskite BiHoNiTiO6 (BHNT) was prepared at high temperature following mixed oxide solid state reaction mechanism. Structural evaluation by X-ray diffractogram sugg...
TL;DR: Y(Lu)AG:Ce3+,Sm3+ yellow phosphors were prepared by molten salt method with 0.1NaCl-0.1KCl- 0.8NaF as the molten salt.
Abstract: Y(Lu)AG:Ce3+,Sm3+ yellow phosphors were prepared by molten salt method with 0.1NaCl-0.1KCl-0.8NaF as the molten salt. The effects of multi-factor variables on the properties of Y(Lu)AG:Ce3+,Sm3+ ph...
TL;DR: In this paper pristine magnesium aluminium layered double hydroxide (Mg-Al LDH) nanoparticles were synthesized by simple co-precipitation technique followed by intercalation of me...
Abstract: In the present study, pristine magnesium aluminium layered double hydroxide (Mg-Al LDH, sample A) nanoparticles were synthesized by simple co-precipitation technique followed by intercalation of me...
TL;DR: In this article, commercially procured magnesium aluminate (MgAl2O4) spinel powder with average particle size of 300 nm and irregular morphology were spray and freeze granulated.
Abstract: Commercially procured magnesium aluminate (MgAl2O4) spinel powder with average particle size of 300 nm and irregular morphology were spray and freeze granulated. The granules were characterized for...
TL;DR: In this article, the development of morphologically different copper and Cu(OH)2-Cu2O nanostructures by a single step chemical reduction method using ascorbic acid as environmental f...
Abstract: In the present study, we report the development of morphologically different copper and Cu(OH)2-Cu2O nanostructures by a single step chemical reduction method using ascorbic acid as environmental f...
TL;DR: In this article, the authors synthesize a composite of zeolite A-MgO composite in presence of MgCl2 and urea solution under hydrothermal reaction at 150oC for 5 h followed by calcination at 600°C/2 h.
Abstract: Zeolite A-MgO composite was synthesized in presence of zeolite A particles, MgCl2 and urea solution under hydrothermal reaction at 150oC for 5 h followed by calcination at 600°C/2 h. XRD and FTIR r...
TL;DR: In this paper, the production of high temperature structural insulator (HTSI) is discussed. But the authors do not consider the use of the EEP residue during the calcination of aluminium hydroxide in the Bayer process.
Abstract: Electrofilter powder (EP) is a residue generated in large amounts during the calcination of aluminium hydroxide in the Bayer process. The production of high temperature structural insulator (HTSI) ...