120-GHz-band millimeter-wave photonic wireless link for 10-Gb/s data transmission
Citations
5,512 citations
1,072 citations
Cites methods from "120-GHz-band millimeter-wave photon..."
...For a -band UTC-PD module packaged in a WR-3 waveguide, the maximum output power is around 0.5 mW at 350 GHz, and the 3-dB bandwidth is around 140 GHz in the range of 270 410 GHz [63]....
[...]
...Nippon Telegraph and Telephone Corporation (NTT) has demonstrated various types of UTC-PDs for different applications....
[...]
...Note that 6-mA photocurrent corresponds to the output power from the UTC-PD of about 20 A....
[...]
...According to the bandwidth performance of the new receiver and available output power from the UTC-PD, error-free transmission at over 20 Gb/s is anticipated....
[...]
...Later, an InP HEMT power amplifier was added to compensate for the limited output power from the UTC-PD [65], which extended the link distance to a few hundred meters....
[...]
1,037 citations
991 citations
878 citations
Cites background from "120-GHz-band millimeter-wave photon..."
...Sufficient stability of the photonic LO has been confirmed [ 55 ]....
[...]
...The 120 GHz band systems first adopted a photonics-based transmitter (Fig. 5 (b)) in the wireless link with a bit rate of 10 Gbit/s [ 55 , 56]....
[...]
References
332 citations
289 citations
274 citations
206 citations
"120-GHz-band millimeter-wave photon..." refers background in this paper
...This link employs photonic techniques for the generation, amplification, transmission, and modulation of MMW signals because photonic components are suitable for generating high-frequency signals [3]....
[...]
183 citations
Additional excerpts
...Finally, we estimated the transmissions distance from output power, antenna gain, and atmospheric loss....
[...]