scispace - formally typeset
Search or ask a question
Journal ArticleDOI

A comparison of cost-benefit analysis of biomass and natural gas CHP projects in Denmark and the Netherlands

01 Feb 2016-Renewable Energy (PERGAMON-ELSEVIER SCIENCE LTD)-Vol. 86, pp 1095-1102
TL;DR: In this paper, the authors investigate what drives differences in the project appraisal of biomass and natural gas combined heat and power (CHP) projects in two countries with very similar energy profiles.
About: This article is published in Renewable Energy.The article was published on 2016-02-01 and is currently open access. It has received 14 citations till now. The article focuses on the topics: Project appraisal.

Summary (2 min read)

1. Introduction

  • Full harmonization of common, binding provisions for the support of renewably sourced electricity is a long-term aspiration for the EU Commission (EC), where full harmonization extends across the level of support, the support schemes and the legal framework including regulatory issues [1].
  • Externalities relating to energy generation and the valuation perspective of consumers are usually being investigated with willingness to pay studies.
  • The methodology aims to find out whether benefits of a project or policy actually outweigh its costs, and by how much in relation to the alternatives (among which usual a ‘do nothing’ option) [7].
  • The purpose of their paper is to demonstrate the extent and determinants of any disparities between two EU member states, the Netherlands and Denmark, by applying their respective CBA methods to the same case study.
  • Both countries have significantly higher shares of CHP generation than the EU-28 as a whole, and both countries are net exporters of natural gas.

2.1. Background of the case study

  • Assuming that support policies are related to an ex post estimation of net benefits and to correct market externalities, it makes sense to use CBA to determinewhether disparities in CBA methodology might threaten potential gains from harmonizing energy policy across EU member states.
  • Any such differences in conditions between countries might be reflected in the socioeconomic values for economic externalities e positive and negative e set for the CBA of public projects.
  • Natural variations between states in, for instance, electricity prices are assumed to reflect national priorities and comparative advantages.
  • The energy profiles of Denmark and the Netherlands share a number of common characteristics, such as substantial natural gas fields and an abundance of biomass and wind resources.
  • For Denmark the average share for 2011 was 46%, with corresponding values for the Netherlands and the EU-28 at 33% and 11% respectively.

2.2. CBA analysis

  • Cost-benefit analysis (CBA) is an approach that is used for estimating the strengths andweaknesses of several project alternatives [6,7].
  • The extra electricity produced by the natural gas CHP systemwas sold to the grid previously, but with the biomass unit, all electricity produced is used onsite instead.
  • The Dutch price projection is based on the background data used to evaluate the Dutch energy agreement [24].
  • After the net tax impact factors, the values correspond roughly with the price projections used in the recent public CBA analysis of a 6,000 MW wind farm [29].
  • The amount of emissions associated with each generated unit of energy (emission intensity) depends not only on the fuel type but also on technology characteristics of the energy plant used [39].

3. Results

  • Table 3 provides the results of the NPV calculations.
  • These are net benefits of the biomass CHP over the natural gas CHP.
  • Deadweight social loss has a minor impact in both states and for both alternate natural gas systems in this case study.
  • The Danish subsidy levels are significantly lower than the Dutch ones for the same technology, and they do change in line with the reduction in NPV from one comparison to the other.
  • In their fifth sensitivity analysis, the authors increase respectively decrease electricity costs with 25% and calculate the impact on the net NPV as reported in Table 3 (Panel C) and in the first line of Table 5.

4. Conclusion

  • The aim of this paper was to examine sources of any discrepancies in cost-benefit analysis (CBA) methodology and to estimate how this might impact the results.
  • The authors want to find out whether the CBA yields similar results for identical projects located in two EU member states with highly identical preferences.
  • Any differences in the results of their case study would suggest that there is divergence in the methodology or a natural variance between the two countries, or a combination of both.
  • These differences are pervasive enough that the net fuel costs are included as a benefit in the Danish case, i.e. the switch from natural gas CHP to biomass CHP results in annual fuel cost savings, while net fuel costs in the Netherlands impose an additional cost on the biomass CHP owner.
  • Related is that the inclusion or exclusion of the impact of methane on the environment turns out to make a huge difference regarding the value and appraisal of the investment projects.

Did you find this useful? Give us your feedback

Citations
More filters
Journal ArticleDOI
TL;DR: In this article, the authors present a case study that assesses the potential of the use of biomass gasification in an existing Portuguese trigeneration natural gas-fired plant located in Lisboa.
Abstract: Biomass is one of the renewable energy sources (RES) with highest potential to contribute to the world's energy needs and can thereby play a key role in the path towards smart energy systems. Smart energy systems aim to integrate all energy sectors to increase the penetration of RES in the energy supply. Biomass gasification is a key technology to fulfil the goal of sustainable RES systems. Its main product (syngas) can be used as fuel, in various conversion technologies, to produce different products, including electricity, heat, cooling, biofuels and chemicals, which makes this technology an important tool for the energy system flexibility. Initially, the present manuscript reviews the relevant studies on the use of biomass gasification in trigeneration and polygeneration systems. Subsequently, it presents a case study that assesses the potential of the use of biomass gasification in an existing Portuguese trigeneration natural gas-fired plant located in Lisboa. The literature review revealed that most of the studies analysed are based on modelling data and not on experimental and/or pilot installations data. These studies show the environmental and energy added value of this type of system but stress the system's complexity and high investment costs. As for the case study, all scenarios considered show a negative net present value; nevertheless, the decrease of the biomass cost or the increase of the natural gas cost can turn financially feasible some scenarios.

76 citations

Journal ArticleDOI
15 Apr 2018-Energy
TL;DR: In this article, the potential cost savings and greenhouse gas (GHG) reduction of district heating (DH) systems using heat from nuclear combined heat and power plants (NCHP) in Europe were evaluated.

30 citations

Journal ArticleDOI
TL;DR: A day-ahead scheduling framework of integrated electricity and NG system (IENG) is proposed at a distribution level based on the fast alternating direction multiplier method with restart algorithm considering demand side response and uncertainties.
Abstract: Power generated by the natural gas (NG) is a promising option for solving the restrictions on the development of the power industry. Consequently, the high interdependence between NG network and electricity network should be considered in this integration. In this paper, a day-ahead scheduling framework of integrated electricity and NG system (IENG) is proposed at a distribution level based on the fast alternating direction multiplier method with restart algorithm considering demand side response and uncertainties. Within the proposed framework, the detailed model of the IENG system at a distribution level is established, where the NG flow equation is processed by incremental linearization method to improve the computational efficiency. The objective is to minimize the operation costs of the entire system. With consideration of the uncertainties of distributed generation and electricity load as well as the uncertainties from the NG load, a two-stage robust optimization model is introduced to obtain the worst case within the uncertainty set, which is solved by column and constraints generation algorithm. In addition, the demand-side response (DSR) model including the decentralized air conditioning (AC) load model and the centralized ice-storage AC load model is integrated into the scheduling framework. Finally, the proposed day-ahead scheduling framework is verified by numerical studies where the optimal scheduling schemes are obtained in different cases, both the effects of the uncertainties and the performance with introducing DSR to the system operation are analyzed.

29 citations

01 Jan 2007
TL;DR: In this article, the authors present the findings of a choice experiment designed to estimate consumer preferences and willingness-to-pay (WTP) for voluntary participation in green energy electricity programs and compare it to WTP for green energy from specific sources, including wind, solar, farm methane, and biomass.
Abstract: Abstract We present the findings of a choice experiment designed to estimate consumer preferences and willingness-to-pay (WTP) for voluntary participation in green energy electricity programs. Our model estimates WTP for a generic “green energy” source and compares it to WTP for green energy from specific sources, including wind, solar, farm methane, and biomass. Our results show that there exists a positive WTP for green energy electricity. Further, individuals have a preference for solar over a generic green and wind. Biomass and farm methane are found to be the least preferred sources.

24 citations

Journal ArticleDOI
TL;DR: In this article, the authors surveyed 602 plant operators in Germany, yielding 1035 price points and identified five factors that contribute to higher heat prices: the operator of the plant also operates the heat grid, the heat contract offer full supply security, and the heat be sold for heating buildings.

23 citations

References
More filters
15 Mar 2010
TL;DR: In this paper, shadow prices are constructed prices for goods or production factors that are not traded in markets, and these estimates can be used in a variety of applications, including costbenefit analyses and investment decisions, or as a weighting method for comparing the relative severity of different environmental impacts.
Abstract: Shadow prices are constructed prices for goods or production factors that are not traded in markets. Environmental quality is one example. By using these shadow prices, the environment can nonetheless be included in various kinds of economic analysis. Shadow prices then provide an indication of the value of a particular good - in this case environmental quality - to society. In the context of the present study, shadow prices can be regarded as estimates of the value of environmental goods. These estimates can be used in a variety of applications, including cost-benefit analyses and investment decisions, or as a weighting method for comparing the relative severity of different environmental impacts. It was in 2002 that CE Delft last elaborated a set of shadow prices and these are now seriously outdated. This study has several aims: to develop a new set of shadow prices that can be used for valuing and weighting environmental impacts; to explain the use of shadow prices; and to provide a user's manual giving guidance on what kind of shadow price should be used in what situation. As a unique addition, the present study has combined the most recent developments in the environmental science of characterisation factors and the economics of valuation into a methodologically consistent framework. In this way a contribution has been made to both the literature on valuation of externalities and the environmental science literature concerned with elaborating weighting factors.

38 citations

DOI
01 Jan 2013
TL;DR: The THINK project as discussed by the authors publishes two research reports based on topics proposed by the European Commission each semester, which are published in the spring and fall of each year, depending on the topic of the year.
Abstract: Each semester the THINK project publishes two research reports based on topics proposed by the European Commission.

31 citations


"A comparison of cost-benefit analys..." refers background in this paper

  • ...At present, CBA guidelines for electricity infrastructure, gas infrastructure and smart grids are being refined by the EC in order to address trans-European energy infrastructure projects [11]....

    [...]

Posted Content
TL;DR: In this paper, the authors investigate the effects of political and economic freedom on CO2 emissions and find that increased price stability and legal structure decrease emissions in countries with a small industry share of GDP, but increase emissions in those with a large industry share.
Abstract: In this paper we investigate the effects of political and economic freedom on CO2 emissions. As far as we know this is the first cross-country study of the relationship between economic freedom and environmental quality. Economic freedom is measured in several ways. We find that increased price stability and legal structure decrease emissions in countries with a small industry share of GDP, but increases emissions in countries with a large industry share of GDP. The decreasing effect from increased use of market is significant but non-robust, and increased freedom to trade does not have any significant effect. The effect of political freedom on CO2 emissions is insignificant, most probably since CO2 emissions is a global environmental problem and hence subject to free-riding by the individual countries.

22 citations

Book
01 Jan 2011
TL;DR: In this article, the authors investigated the impact of international transport on the total cost and greenhouse gas balance of solid woody biomass, and developed a geospatial intermodal biomass transport model in the ArcGIS 10.0 Network Analyst extension.
Abstract: This report investigated the impact of international transport on the total cost and greenhouse gas balance of solid woody biomass. For this purpose, a geospatial intermodal biomass transport model was developed in the ArcGIS 10.0 Network Analyst extension. This model has been complemented with data on the cost of shipment using road (truck), water (ocean ships and inland navigation ships) and rail and the cost of transhipment between these modalities. With respect to the methodology applied in this study, we conclude that the modelling tool developed for this study using the ArcGIS Network Analyst extension, provides useful insights in country-to-country cost of biomass distribution. The results will be used as input to the energy model GREEN-X to estimate future supply and demand of biomass without being limited to national biomass sources or distribution of international supply of biomass applied exogenously to the GREEN-X modelling framework. Furthermore, related GHG emissions of the total biomass supply chain provide insight in the GHG reduction performance and optimal use of biomass sources.

16 citations

Journal ArticleDOI
TL;DR: Genetic Programming and Artificial Neural Networks are used to find an optimal functional relationship between the CO2 emissions and a set of historical, economic, geographical, religious, and social variables, which are considered as a good approximation to the institutional quality of a country.
Abstract: Understanding the complex process of climate change implies the knowledge of all possible determinants of CO2 emissions. This paper studies the influence of several institutional determinants on CO2 emissions, clarifying which variables are relevant to explain this influence. For this aim, Genetic Programming and Artificial Neural Networks are used to find an optimal functional relationship between the CO2 emissions and a set of historical, economic, geographical, religious, and social variables, which are considered as a good approximation to the institutional quality of a country. Besides this, the paper compares the results using these computational methods with that employing a more traditional parametric perspective: ordinary least squares regression (OLS). Following the empirical results of the cross-country application, this paper generates new evidence on the binomial institutions and CO2 emissions. Specifically, all methods conclude a significant influence of ethnolinguistic fractionalization (ETHF) on CO2 emissions. Copyright © 2009 John Wiley & Sons, Ltd.

11 citations


"A comparison of cost-benefit analys..." refers background in this paper

  • ...Studies [15, 16] show that institutional factors may impact development and environmental quality of a country....

    [...]

Frequently Asked Questions (2)
Q1. What are the contributions in "A comparison of cost-benefit analysis of biomass and natural gas chp projects in denmark and the netherlands" ?

The authors investigate what drives differences in the project appraisal of biomass and natural gas combined heat and power ( CHP ) projects in two countries with very similar energy profiles. Concurrently, it is also promoting the use of cost benefit analysis ( CBA ) for transnational energy infrastructure projects. The authors use CBA to assess the same project proposal in Denmark and the Netherlands, following the respective country 's guidelines. This is of importance as the European Commission is assessing the potential scope of harmonizing renewable electricity support schemes post 2020. Furthermore, the authors establish that the sensitivity of the CBA results not only from policy differences in the countries, but also from differences in the methodology 

The authors suggest that further research in the formulation of CBA methodology for a common EC policy framework includes case studies to demonstrate the extent of sensitivity both due from natural variations between states and from discrepancies in the approach used.