A comparison study of the catalytic properties of Au-based nanocages, nanoboxes, and nanoparticles.
TL;DR: The kinetic data indicate that the Au-based nanocages are catalytically more active than both the nanoboxes and nanoparticles probably due to their extremely thin but electrically continuous walls, the high content of Au, and the accessibility of both inner and outer surfaces through the pores in the walls.
Abstract: We have evaluated the catalytic properties of Au-based nanostructures (including nanocages, nanoboxes, and solid nanoparticles) using a model reaction based on the reduction of p-nitrophenol by NaBH4. From the average reaction rate constants at three different temperatures, we determined the activation energy, the entropy of activation, and the pre-exponential factor for each type of Au nanostructure. The kinetic data indicate that the Au-based nanocages are catalytically more active than both the nanoboxes and nanoparticles probably due to their extremely thin but electrically continuous walls, the high content of Au, and the accessibility of both inner and outer surfaces through the pores in the walls. In addition, a compensation effect was observed in this Au-based catalytic system, which can be primarily interpreted by a model based on kinetic regime switching.
Citations
More filters
TL;DR: A comprehensive review of recent research activities on bimetallic nanocrystals, featuring key examples from the literature that exemplify critical concepts and place a special emphasis on mechanistic understanding.
Abstract: Achieving mastery over the synthesis of metal nanocrystals has emerged as one of the foremost scientific endeavors in recent years. This intense interest stems from the fact that the composition, size, and shape of nanocrystals not only define their overall physicochemical properties but also determine their effectiveness in technologically important applications. Our aim is to present a comprehensive review of recent research activities on bimetallic nanocrystals. We begin with a brief introduction to the architectural diversity of bimetallic nanocrystals, followed by discussion of the various synthetic techniques necessary for controlling the elemental ratio and spatial arrangement. We have selected key examples from the literature that exemplify critical concepts and place a special emphasis on mechanistic understanding. We then discuss the composition-dependent properties of bimetallic nanocrystals in terms of catalysis, optics, and magnetism and conclude the Review by highlighting applications that h...
1,203 citations
TL;DR: In this article, a study on the catalytic reduction of 4-nitrophenol by sodium borohydride in the presence of metal nanoparticles is presented, where the nanoparticles are embedded in spherical polyelectrolyte brushes.
Abstract: We present a study on the catalytic reduction of 4-nitrophenol by sodium borohydride in the presence of metal nanoparticles. The nanoparticles are embedded in spherical polyelectrolyte brushes, which consist of a polystyrene core onto which a dense layer of cationic polyelectrolyte brushes are grafted. The average size of the nanoparticles is approximately 2 nm. The kinetic data obtained by monitoring the reduction of 4-nitrophenol by UV/vis-spectroscopy could be explained in terms of the Langmuir−Hinshelwood model: The borohydride ions transfer a surface-hydrogen species in a reversible manner to the surface. Concomitantly 4-nitrophenol is adsorbed and the rate-determining step consists of the reduction of nitrophenol by the surface-hydrogen species. The apparent reaction rate can therefore be related to the total surface S of the nanoparticles, to the kinetic constant k related to the rate-determining step, and to the adsorption constants KNip and KBH4 of nitrophenol and of borohydride, respectively. In...
1,047 citations
TL;DR: This tutorial review a subset of well-studied reactions that take place in aqueous phase and for which a comprehensive kinetic analysis is available, namely the reduction of p-nitrophenol and hexacyanoferrate, both by borohydride ions.
Abstract: Catalysis by metallic nanoparticles is certainly among the most intensely studied problems in modern nanoscience. However, reliable tests for catalytic performance of such nanoparticles are often poorly defined, which makes comparison and benchmarking rather difficult. We tackle in this tutorial review a subset of well-studied reactions that take place in aqueous phase and for which a comprehensive kinetic analysis is available. Two of these catalytic model reactions are under consideration here, namely the reduction of (i) p-nitrophenol and (ii) hexacyanoferrate (III), both by borohydride ions. Both reactions take place at the surface of noble metal nanoparticles at room temperature and can be accurately monitored by UV-vis spectroscopy. Moreover, the total surface area of the nanoparticles in solution can be known with high precision and thus can be directly used for the kinetic analysis. Hence, these model reactions represent cases of heterogeneous catalysis that can be modelled with the accuracy typically available for homogeneous catalysis. Both model reactions allow us to discuss a number of important concepts and questions, namely the dependence of catalytic activity on the size of the nanoparticles, electrochemistry of nanoparticles, surface restructuring, the use of carrier systems and the role of diffusion control.
935 citations
TL;DR: A progress report on the use of galvanic replacement for generating complex hollow nanostructures with tunable and well-controlled properties and its capability to fabricate nanomaterials with complex structures and/or compositions by coupling with other processes such as co-reduction and the Kirkendall effect.
Abstract: This article provides a progress report on the use of galvanic replacement for generating complex hollow nanostructures with tunable and well-controlled properties. We begin with a brief account of the mechanistic understanding of galvanic replacement, specifically focused on its ability to engineer the properties of metal nanostructures in terms of size, composition, structure, shape, and morphology. We then discuss a number of important concepts involved in galvanic replacement, including the facet selectivity involved in the dissolution and deposition of metals, the impacts of alloying and dealloying on the structure and morphology of the final products, and methods for promoting or preventing a galvanic replacement reaction. We also illustrate how the capability of galvanic replacement can be enhanced to fabricate nanomaterials with complex structures and/or compositions by coupling with other processes such as co-reduction and the Kirkendall effect. Finally, we highlight the use of such novel metal nanostructures fabricated via galvanic replacement for applications ranging from catalysis to plasmonics and biomedical research, and conclude with remarks on prospective future directions.
803 citations
TL;DR: A cylindrical piece of Au/graphene hydrogel, 1.08 cm in diameter and 1.28 cm in height, has been synthesized through the self-assembly of Au and graphene sheets under hydrothermal conditions for the first time as mentioned in this paper.
Abstract: A cylindrical piece of Au/graphene hydrogel, 1.08 cm in diameter and 1.28 cm in height, has been synthesized through the self-assembly of Au/graphene sheets under hydrothermal conditions for the first time. The hydrogel, containing 2.26 wt% Au, 6.94 wt% graphene, and 90.8 wt% water, exhibited excellent catalytic performance towards the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP), which is about 90 times larger than previously reported values for spongy Au nanoparticles and 14 times more than the highest value among the polymer supported Au nanoparticle catalysts. The high catalytic activity arises from the synergistic effect of graphene: (1) the high adsorption ability of graphene towards 4-NP, providing a high concentration of 4-NP near to the Au nanoparticles on graphene; and (2) electron transfer from graphene to Au nanoparticles, facilitating the uptake of electrons by 4-NP molecules.
791 citations
References
More filters
TL;DR: A review of gold nanoparticles can be found in this article, where the most stable metal nanoparticles, called gold colloids (AuNPs), have been used for catalysis and biology applications.
Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346
11,752 citations
TL;DR: Semiconductor nanocrystals prepared for use as fluorescent probes in biological staining and diagnostics have a narrow, tunable, symmetric emission spectrum and are photochemically stable.
Abstract: Semiconductor nanocrystals were prepared for use as fluorescent probes in biological staining and diagnostics. Compared with conventional fluorophores, the nanocrystals have a narrow, tunable, symmetric emission spectrum and are photochemically stable. The advantages of the broad, continuous excitation spectrum were demonstrated in a dual-emission, single-excitation labeling experiment on mouse fibroblasts. These nanocrystal probes are thus complementary and in some cases may be superior to existing fluorophores.
8,542 citations
TL;DR: A highly selective, colorimetric polynucleotide detection method based on mercaptoalkyloligonucleotide-modified gold nanoparticle probes is reported, which can detect about 10 femtomoles of an oligonucleotide.
Abstract: A highly selective, colorimetric polynucleotide detection method based on mercaptoalkyloligonucleotide-modified gold nanoparticle probes is reported. Introduction of a single-stranded target oligonucleotide (30 bases) into a solution containing the appropriate probes resulted in the formation of a polymeric network of nanoparticles with a concomitant red-to-pinkish/purple color change. Hybridization was facilitated by freezing and thawing of the solutions, and the denaturation of these hybrid materials showed transition temperatures over a narrow range that allowed differentiation of a variety of imperfect targets. Transfer of the hybridization mixture to a reverse-phase silica plate resulted in a blue color upon drying that could be detected visually. The unoptimized system can detect about 10 femtomoles of an oligonucleotide.
4,334 citations
TL;DR: In vivo studies under magnetic resonance guidance revealed that exposure to low doses of NIR light in solid tumors treated with metal nanoshells reached average maximum temperatures capable of inducing irreversible tissue damage, and found good correlation with histological findings.
Abstract: Metal nanoshells are a class of nanoparticles with tunable optical resonances. In this article, an application of this technology to thermal ablative therapy for cancer is described. By tuning the nanoshells to strongly absorb light in the near infrared, where optical transmission through tissue is optimal, a distribution of nanoshells at depth in tissue can be used to deliver a therapeutic dose of heat by using moderately low exposures of extracorporeally applied near-infrared (NIR) light. Human breast carcinoma cells incubated with nanoshells in vitro were found to have undergone photothermally induced morbidity on exposure to NIR light (820 nm, 35 W/cm2), as determined by using a fluorescent viability stain. Cells without nanoshells displayed no loss in viability after the same periods and conditions of NIR illumination. Likewise, in vivo studies under magnetic resonance guidance revealed that exposure to low doses of NIR light (820 nm, 4 W/cm2) in solid tumors treated with metal nanoshells reached average maximum temperatures capable of inducing irreversible tissue damage (DeltaT = 37.4 +/- 6.6 degrees C) within 4-6 min. Controls treated without nanoshells demonstrated significantly lower average temperatures on exposure to NIR light (DeltaT < 10 degrees C). These findings demonstrated good correlation with histological findings. Tissues heated above the thermal damage threshold displayed coagulation, cell shrinkage, and loss of nuclear staining, which are indicators of irreversible thermal damage. Control tissues appeared undamaged.
3,774 citations
TL;DR: This paper presents a meta-analysis of four-Wave Mixing and its applications in nanofiltration, which shows clear trends in high-performance liquid chromatography and also investigates the role of nano-magnifying lens technology in this process.
Abstract: 12.2.2. Four-Wave Mixing (FWM) 4849 12.2.3. Dye Aggregation 4850 12.2.4. Optoelectronic Nanodevices 4850 12.3. Sensor 4851 12.3.1. Chemical Sensor 4851 12.3.2. Biological Sensor 4851 12.4. Catalysis 4852 13. Conclusion and Perspectives 4852 14. Abbreviations 4853 15. Acknowledgements 4854 16. References 4854 * Corresponding author E-mail: tpal@chem.iitkgp.ernet.in. † Raidighi College. § Indian Institute of Technology. 4797 Chem. Rev. 2007, 107, 4797−4862
2,414 citations