A flexible new technique for camera calibration
01 Nov 2000-IEEE Transactions on Pattern Analysis and Machine Intelligence (IEEE Computer Society)-Vol. 22, Iss: 11, pp 1330-1334
TL;DR: A flexible technique to easily calibrate a camera that only requires the camera to observe a planar pattern shown at a few (at least two) different orientations is proposed and advances 3D computer vision one more step from laboratory environments to real world use.
Abstract: We propose a flexible technique to easily calibrate a camera. It only requires the camera to observe a planar pattern shown at a few (at least two) different orientations. Either the camera or the planar pattern can be freely moved. The motion need not be known. Radial lens distortion is modeled. The proposed procedure consists of a closed-form solution, followed by a nonlinear refinement based on the maximum likelihood criterion. Both computer simulation and real data have been used to test the proposed technique and very good results have been obtained. Compared with classical techniques which use expensive equipment such as two or three orthogonal planes, the proposed technique is easy to use and flexible. It advances 3D computer vision one more step from laboratory environments to real world use.
Citations
More filters
TL;DR: In this paper, the underlying principles of video and stereo video analysis as well as its automation are reviewed and accompanied by a fully functional and freely available software implementation, which can be used to automate the analysis.
Abstract: Researchers studying aspects of locomotion or movement in biological and biomimetic systems commonly use video or stereo video recordings to quantify the behaviour of the system in question, often with an emphasis on measures of position, velocity and acceleration. However, despite the apparent simplicity of video analysis, it can require substantial investment of time and effort, even when performed with adequate software tools. This paper reviews the underlying principles of video and stereo video analysis as well as its automation and is accompanied by fully functional and freely available software implementation.
1,049 citations
TL;DR: The principles of the real-time 3D shape measurement techniques that were developed are presented, the most recent progresses that have been made in this field are summarized, and the challenges for advancing this technology further are discussed.
926 citations
Cites methods from "A flexible new technique for camera..."
...The most popular method is to use a flat checkerboard method proposed by Zhang [26]....
[...]
Patent•
01 Dec 2003TL;DR: In this article, a perceptual user interface system includes a tracking component that detects object characteristics of at least one of a plurality of objects within a scene, and tracks the respective object.
Abstract: Architecture for implementing a perceptual user interface. The architecture comprises alternative modalities for controlling computer application programs and manipulating on-screen objects through hand gestures or a combination of hand gestures and verbal commands. The perceptual user interface system includes a tracking component that detects object characteristics of at least one of a plurality of objects within a scene, and tracks the respective object. Detection of object characteristics is based at least in part upon image comparison of a plurality of images relative to a course mapping of the images. A seeding component iteratively seeds the tracking component with object hypotheses based upon the presence of the object characteristics and the image comparison. A filtering component selectively removes the tracked object from the object hypotheses and/or at least one object hypothesis from the set of object hypotheses based upon predetermined removal criteria.
876 citations
Patent•
24 Jul 2001TL;DR: In this paper, a method of using stereo vision to interface with a computer is described, which includes capturing a stereo image, processing the stereo image to determine position information of an object in the stereo images, and communicating the position information to the computer.
Abstract: A method of using stereo vision to interface with a computer is provided. The method includes capturing a stereo image, and processing the stereo image to determine position information of an object in the stereo image. The object is controlled by a user. The method also includes communicating the position information to the computer to allow the user to interact with a computer application.
838 citations
01 Jul 2003
TL;DR: This work presents a generative model for isotropic bidirectional reflectance distribution functions (BRDFs) based on acquired reflectance data that lets users define perceptually meaningful parametrization directions to navigate in the reduced-dimension BRDF space.
Abstract: We present a generative model for isotropic bidirectional reflectance distribution functions (BRDFs) based on acquired reflectance data. Instead of using analytical reflectance models, we represent each BRDF as a dense set of measurements. This allows us to interpolate and extrapolate in the space of acquired BRDFs to create new BRDFs. We treat each acquired BRDF as a single high-dimensional vector taken from a space of all possible BRDFs. We apply both linear (subspace) and non-linear (manifold) dimensionality reduction tools in an effort to discover a lower-dimensional representation that characterizes our measurements. We let users define perceptually meaningful parametrization directions to navigate in the reduced-dimension BRDF space. On the low-dimensional manifold, movement along these directions produces novel but valid BRDFs.
818 citations
References
More filters
IBM1
TL;DR: In this paper, a two-stage technique for 3D camera calibration using TV cameras and lenses is described, aimed at efficient computation of camera external position and orientation relative to object reference coordinate system as well as the effective focal length, radial lens distortion, and image scanning parameters.
Abstract: A new technique for three-dimensional (3D) camera calibration for machine vision metrology using off-the-shelf TV cameras and lenses is described. The two-stage technique is aimed at efficient computation of camera external position and orientation relative to object reference coordinate system as well as the effective focal length, radial lens distortion, and image scanning parameters. The two-stage technique has advantage in terms of accuracy, speed, and versatility over existing state of the art. A critical review of the state of the art is given in the beginning. A theoretical framework is established, supported by comprehensive proof in five appendixes, and may pave the way for future research on 3D robotics vision. Test results using real data are described. Both accuracy and speed are reported. The experimental results are analyzed and compared with theoretical prediction. Recent effort indicates that with slight modification, the two-stage calibration can be done in real time.
5,940 citations
Book•
03 Jan 1992
TL;DR: A new technique for three-dimensional camera calibration for machine vision metrology using off-the-shelf TV cameras and lenses using two-stage technique has advantage in terms of accuracy, speed, and versatility over existing state of the art.
Abstract: A new technique for three-dimensional (3D) camera calibration for machine vision metrology using off-the-shelf TV cameras and lenses is described. The two-stage technique is aimed at efficient computation of camera external position and orientation relative to object reference coordinate system as well as the effective focal length, radial lens distortion, and image scanning parameters. The two-stage technique has advantage in terms of accuracy, speed, and versatility over existing state of the art. A critical review of the state of the art is given in the beginning. A theoretical framework is established, supported by comprehensive proof in five appendixes, and may pave the way for future research on 3D robotics vision. Test results using real data are described. Both accuracy and speed are reported. The experimental results are analyzed and compared with theoretical prediction. Recent effort indicates that with slight modification, the two-stage calibration can be done in real time.
5,816 citations
"A flexible new technique for camera..." refers background in this paper
...See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/3193178...
[...]
01 Jan 1978
4,100 citations
Proceedings Article•
31 Dec 1993TL;DR: Results from constrained optimization some results from algebraic geometry differential geometry are shown.
Abstract: Projective geometry modelling and calibrating cameras edge detection representing geometric primitives and their uncertainty stereo vision determining discrete motion from points and lines tracking tokens over time motion fields of curves interpolating and approximating three-dimensional data recognizing and locating objects and places answers to problems. Appendices: constrained optimization some results from algebraic geometry differential geometry.
2,744 citations