A new collection of real world applications of fractional calculus in science and engineering
01 Nov 2018-Communications in Nonlinear Science and Numerical Simulation (Elsevier)-Vol. 64, pp 213-231
TL;DR: This review article aims to present some short summaries written by distinguished researchers in the field of fractional calculus that will guide young researchers and help newcomers to see some of the main real-world applications and gain an understanding of this powerful mathematical tool.
About: This article is published in Communications in Nonlinear Science and Numerical Simulation.The article was published on 2018-11-01. It has received 922 citations till now.
Citations
More filters
••
TL;DR: Simulation results show that the new presented model based on the fractional operator with Mittag-Leffler kernel represents various asymptomatic behaviors that tracks the real data more accurately than the other fractional- and integer-order models.
Abstract: In this paper, we present a new fractional-order mathematical model for a tumor-immune surveillance mechanism. We analyze the interactions between various tumor cell populations and immune system via a system of fractional differential equations (FDEs). An efficient numerical procedure is suggested to solve these FDEs by considering singular and nonsingular derivative operators. An optimal control strategy for investigating the effect of chemotherapy treatment on the proposed fractional model is also provided. Simulation results show that the new presented model based on the fractional operator with Mittag–Leffler kernel represents various asymptomatic behaviors that tracks the real data more accurately than the other fractional- and integer-order models. Numerical simulations also verify the efficiency of the proposed optimal control strategy and show that the growth of the naive tumor cell population is successfully declined.
200 citations
••
TL;DR: The proposed new variable-order fractional chaotic systems improves security of the image encryption and saves the encryption time greatly.
Abstract: New variable-order fractional chaotic systems are proposed in this paper. A concept of short memory is introduced where the initial point in the Caputo derivative is varied. The fractional order is defined by the use of a piecewise constant function which leads to rich chaotic dynamics. The predictor-corrector method is adopted, and numerical solutions of fractional delay equations are obtained. Then, this concept is extended to fractional difference equations, and generalized chaotic behaviors are discussed numerically. Finally, the new fractional chaotic models are applied to block image encryption and each block has a different fractional order. The new chaotic system improves security of the image encryption and saves the encryption time greatly.
180 citations
••
06 Mar 2020
TL;DR: The Caputo fractional derivative has been one of the most useful operators for modelling non-local behaviors by fractional differential equations as discussed by the authors. But it is not a suitable operator for modeling the Mittag-Leffler function.
Abstract: The Caputo fractional derivative has been one of the most useful operators for modelling non-local behaviours by fractional differential equations. It is defined, for a differentiable function f ( t ) , by a fractional integral operator applied to the derivative f ′ ( t ) . We define a new fractional operator by substituting for this f ′ ( t ) a more general proportional derivative. This new operator can also be written as a Riemann–Liouville integral of a proportional derivative, or in some important special cases as a linear combination of a Riemann–Liouville integral and a Caputo derivative. We then conduct some analysis of the new definition: constructing its inverse operator and Laplace transform, solving some fractional differential equations using it, and linking it with a recently described bivariate Mittag-Leffler function.
169 citations
••
08 Sep 2019
TL;DR: Fractional calculus dates its inception to a correspondence between Leibniz and L’Hopital in 1695 as discussed by the authors, and it has become a thriving field of research not only in mathematics but also in other parts of science such as physics, biology, and engineering.
Abstract: Fractional calculus dates its inception to a correspondence between Leibniz and L’Hopital in 1695, when Leibniz described “paradoxes” and predicted that “one day useful consequences will be drawn” from them. In today’s world, the study of non-integer orders of differentiation has become a thriving field of research, not only in mathematics but also in other parts of science such as physics, biology, and engineering: many of the “useful consequences” predicted by Leibniz have been discovered. However, the field has grown so far that researchers cannot yet agree on what a “fractional derivative” can be. In this manuscript, we suggest and justify the idea of classification of fractional calculus into distinct classes of operators.
140 citations
••
TL;DR: This review article is an attempt to present and discuss the main differences between ideal capacitors and supercapacitors, and especially how the performance metrics of the latter depend on the operating frequency, the charging/discharging waveform type as well as their deviation from ideality.
117 citations
References
More filters
•
02 Mar 2006
TL;DR: In this article, the authors present a method for solving Fractional Differential Equations (DFE) using Integral Transform Methods for Explicit Solutions to FractionAL Differentially Equations.
Abstract: 1. Preliminaries. 2. Fractional Integrals and Fractional Derivatives. 3. Ordinary Fractional Differential Equations. Existence and Uniqueness Theorems. 4. Methods for Explicitly solving Fractional Differential Equations. 5. Integral Transform Methods for Explicit Solutions to Fractional Differential Equations. 6. Partial Fractional Differential Equations. 7. Sequential Linear Differential Equations of Fractional Order. 8. Further Applications of Fractional Models. Bibliography Subject Index
11,492 citations
•
08 Dec 1993
TL;DR: Fractional integrals and derivatives on an interval fractional integral integrals on the real axis and half-axis further properties of fractional integral and derivatives, and derivatives of functions of many variables applications to integral equations of the first kind with power and power-logarithmic kernels integral equations with special function kernels applications to differential equations as discussed by the authors.
Abstract: Fractional integrals and derivatives on an interval fractional integrals and derivatives on the real axis and half-axis further properties of fractional integrals and derivatives other forms of fractional integrals and derivatives fractional integrodifferentiation of functions of many variables applications to integral equations of the first kind with power and power-logarithmic kernels integral equations fo the first kind with special function kernels applications to differential equations.
7,096 citations
••
04 Apr 2005
Abstract: Preface. Preface to the First Edition. Contributors. Contributors to the First Edition. Chapter 1. Fundamentals of Impedance Spectroscopy (J.Ross Macdonald and William B. Johnson). 1.1. Background, Basic Definitions, and History. 1.1.1 The Importance of Interfaces. 1.1.2 The Basic Impedance Spectroscopy Experiment. 1.1.3 Response to a Small-Signal Stimulus in the Frequency Domain. 1.1.4 Impedance-Related Functions. 1.1.5 Early History. 1.2. Advantages and Limitations. 1.2.1 Differences Between Solid State and Aqueous Electrochemistry. 1.3. Elementary Analysis of Impedance Spectra. 1.3.1 Physical Models for Equivalent Circuit Elements. 1.3.2 Simple RC Circuits. 1.3.3 Analysis of Single Impedance Arcs. 1.4. Selected Applications of IS. Chapter 2. Theory (Ian D. Raistrick, Donald R. Franceschetti, and J. Ross Macdonald). 2.1. The Electrical Analogs of Physical and Chemical Processes. 2.1.1 Introduction. 2.1.2 The Electrical Properties of Bulk Homogeneous Phases. 2.1.2.1 Introduction. 2.1.2.2 Dielectric Relaxation in Materials with a Single Time Constant. 2.1.2.3 Distributions of Relaxation Times. 2.1.2.4 Conductivity and Diffusion in Electrolytes. 2.1.2.5 Conductivity and Diffusion-a Statistical Description. 2.1.2.6 Migration in the Absence of Concentration Gradients. 2.1.2.7 Transport in Disordered Media. 2.1.3 Mass and Charge Transport in the Presence of Concentration Gradients. 2.1.3.1 Diffusion. 2.1.3.2 Mixed Electronic-Ionic Conductors. 2.1.3.3 Concentration Polarization. 2.1.4 Interfaces and Boundary Conditions. 2.1.4.1 Reversible and Irreversible Interfaces. 2.1.4.2 Polarizable Electrodes. 2.1.4.3 Adsorption at the Electrode-Electrolyte Interface. 2.1.4.4 Charge Transfer at the Electrode-Electrolyte Interface. 2.1.5 Grain Boundary Effects. 2.1.6 Current Distribution, Porous and Rough Electrodes- the Effect of Geometry. 2.1.6.1 Current Distribution Problems. 2.1.6.2 Rough and Porous Electrodes. 2.2. Physical and Electrochemical Models. 2.2.1 The Modeling of Electrochemical Systems. 2.2.2 Equivalent Circuits. 2.2.2.1 Unification of Immitance Responses. 2.2.2.2 Distributed Circuit Elements. 2.2.2.3 Ambiguous Circuits. 2.2.3 Modeling Results. 2.2.3.1 Introduction. 2.2.3.2 Supported Situations. 2.2.3.3 Unsupported Situations: Theoretical Models. 2.2.3.4 Unsupported Situations: Equivalent Network Models. 2.2.3.5 Unsupported Situations: Empirical and Semiempirical Models. Chapter 3. Measuring Techniques and Data Analysis. 3.1. Impedance Measurement Techniques (Michael C. H. McKubre and Digby D. Macdonald). 3.1.1 Introduction. 3.1.2 Frequency Domain Methods. 3.1.2.1 Audio Frequency Bridges. 3.1.2.2 Transformer Ratio Arm Bridges. 3.1.2.3 Berberian-Cole Bridge. 3.1.2.4 Considerations of Potentiostatic Control. 3.1.2.5 Oscilloscopic Methods for Direct Measurement. 3.1.2.6 Phase-Sensitive Detection for Direct Measurement. 3.1.2.7 Automated Frequency Response Analysis. 3.1.2.8 Automated Impedance Analyzers. 3.1.2.9 The Use of Kramers-Kronig Transforms. 3.1.2.10 Spectrum Analyzers. 3.1.3 Time Domain Methods. 3.1.3.1 Introduction. 3.1.3.2 Analog-to-Digital (A/D) Conversion. 3.1.3.3 Computer Interfacing. 3.1.3.4 Digital Signal Processing. 3.1.4 Conclusions. 3.2. Commercially Available Impedance Measurement Systems (Brian Sayers). 3.2.1 Electrochemical Impedance Measurement Systems. 3.2.1.1 System Configuration. 3.2.1.2 Why Use a Potentiostat? 3.2.1.3 Measurements Using 2, 3 or 4-Terminal Techniques. 3.2.1.4 Measurement Resolution and Accuracy. 3.2.1.5 Single Sine and FFT Measurement Techniques. 3.2.1.6 Multielectrode Techniques. 3.2.1.7 Effects of Connections and Input Impedance. 3.2.1.8 Verification of Measurement Performance. 3.2.1.9 Floating Measurement Techniques. 3.2.1.10 Multichannel Techniques. 3.2.2 Materials Impedance Measurement Systems. 3.2.2.1 System Configuration. 3.2.2.2 Measurement of Low Impedance Materials. 3.2.2.3 Measurement of High Impedance Materials. 3.2.2.4 Reference Techniques. 3.2.2.5 Normalization Techniques. 3.2.2.6 High Voltage Measurement Techniques. 3.2.2.7 Temperature Control. 3.2.2.8 Sample Holder Considerations. 3.3. Data Analysis (J. Ross Macdonald). 3.3.1 Data Presentation and Adjustment. 3.3.1.1 Previous Approaches. 3.3.1.2 Three-Dimensional Perspective Plotting. 3.3.1.3 Treatment of Anomalies. 3.3.2 Data Analysis Methods. 3.3.2.1 Simple Methods. 3.3.2.2 Complex Nonlinear Least Squares. 3.3.2.3 Weighting. 3.3.2.4 Which Impedance-Related Function to Fit? 3.3.2.5 The Question of "What to Fit" Revisited. 3.3.2.6 Deconvolution Approaches. 3.3.2.7 Examples of CNLS Fitting. 3.3.2.8 Summary and Simple Characterization Example. Chapter 4. Applications of Impedance Spectroscopy. 4.1. Characterization of Materials (N. Bonanos, B. C. H. Steele, and E. P. Butler). 4.1.1 Microstructural Models for Impedance Spectra of Materials. 4.1.1.1 Introduction. 4.1.1.2 Layer Models. 4.1.1.3 Effective Medium Models. 4.1.1.4 Modeling of Composite Electrodes. 4.1.2 Experimental Techniques. 4.1.2.1 Introduction. 4.1.2.2 Measurement Systems. 4.1.2.3 Sample Preparation-Electrodes. 4.1.2.4 Problems Associated With the Measurement of Electrode Properties. 4.1.3 Interpretation of the Impedance Spectra of Ionic Conductors and Interfaces. 4.1.3.1 Introduction. 4.1.3.2 Characterization of Grain Boundaries by IS. 4.1.3.3 Characterization of Two-Phase Dispersions by IS. 4.1.3.4 Impedance Spectra of Unusual Two-phase Systems. 4.1.3.5 Impedance Spectra of Composite Electrodes. 4.1.3.6 Closing Remarks. 4.2. Characterization of the Electrical Response of High Resistivity Ionic and Dielectric Solid Materials by Immittance Spectroscopy (J. Ross Macdonald). 4.2.1 Introduction. 4.2.2 Types of Dispersive Response Models: Strengths and Weaknesses. 4.2.2.1 Overview. 4.2.2.2 Variable-slope Models. 4.2.2.3 Composite Models. 4.2.3 Illustration of Typical Data Fitting Results for an Ionic Conductor. 4.3. Solid State Devices (William B. Johnson and Wayne L. Worrell). 4.3.1 Electrolyte-Insulator-Semiconductor (EIS) Sensors. 4.3.2 Solid Electrolyte Chemical Sensors. 4.3.3 Photoelectrochemical Solar Cells. 4.3.4 Impedance Response of Electrochromic Materials and Devices (Gunnar A. Niklasson, Anna Karin Johsson, and Maria Stromme). 4.3.4.1 Introduction. 4.3.4.2 Materials. 4.3.4.3 Experimental Techniques. 4.3.4.4 Experimental Results on Single Materials. 4.3.4.5 Experimental Results on Electrochromic Devices. 4.3.4.6 Conclusions and Outlook. 4.3.5 Time-Resolved Photocurrent Generation (Albert Goossens). 4.3.5.1 Introduction-Semiconductors. 4.3.5.2 Steady-State Photocurrents. 4.3.5.3 Time-of-Flight. 4.3.5.4 Intensity-Modulated Photocurrent Spectroscopy. 4.3.5.5 Final Remarks. 4.4. Corrosion of Materials (Digby D. Macdonald and Michael C. H. McKubre). 4.4.1 Introduction. 4.4.2 Fundamentals. 4.4.3 Measurement of Corrosion Rate. 4.4.4 Harmonic Analysis. 4.4.5 Kramer-Kronig Transforms. 4.4.6 Corrosion Mechanisms. 4.4.6.1 Active Dissolution. 4.4.6.2 Active-Passive Transition. 4.4.6.3 The Passive State. 4.4.7 Point Defect Model of the Passive State (Digby D. Macdonald). 4.4.7.1 Introduction. 4.4.7.2 Point Defect Model. 4.4.7.3 Electrochemical Impedance Spectroscopy. 4.4.7.4 Bilayer Passive Films. 4.4.8 Equivalent Circuit Analysis (Digby D. Macdonald and Michael C. H. McKubre). 4.4.8.1 Coatings. 4.4.9 Other Impedance Techniques. 4.4.9.1 Electrochemical Hydrodynamic Impedance (EHI). 4.4.9.2 Fracture Transfer Function (FTF). 4.4.9.3 Electrochemical Mechanical Impedance. 4.5. Electrochemical Power Sources. 4.5.1 Special Aspects of Impedance Modeling of Power Sources (Evgenij Barsoukov). 4.5.1.1 Intrinsic Relation Between Impedance Properties and Power Sources Performance. 4.5.1.2 Linear Time-Domain Modeling Based on Impedance Models, Laplace Transform. 4.5.1.3 Expressing Model Parameters in Electrical Terms, Limiting Resistances and Capacitances of Distributed Elements. 4.5.1.4 Discretization of Distributed Elements, Augmenting Equivalent Circuits. 4.5.1.5 Nonlinear Time-Domain Modeling of Power Sources Based on Impedance Models. 4.5.1.6 Special Kinds of Impedance Measurement Possible with Power Sources-Passive Load Excitation and Load Interrupt. 4.5.2 Batteries (Evgenij Barsoukov). 4.5.2.1 Generic Approach to Battery Impedance Modeling. 4.5.2.2 Lead Acid Batteries. 4.5.2.3 Nickel Cadmium Batteries. 4.5.2.4 Nickel Metal-hydride Batteries. 4.5.2.5 Li-ion Batteries. 4.5.3 Impedance Behavior of Electrochemical Supercapacitors and Porous Electrodes (Brian E. Conway). 4.5.3.1 Introduction. 4.5.3.2 The Time Factor in Capacitance Charge or Discharge. 4.5.3.3 Nyquist (or Argand) Complex-Plane Plots for Representation of Impedance Behavior. 4.5.3.4 Bode Plots of Impedance Parameters for Capacitors. 4.5.3.5 Hierarchy of Equivalent Circuits and Representation of Electrochemical Capacitor Behavior. 4.5.3.6 Impedance and Voltammetry Behavior of Brush Electrode Models of Porous Electrodes. 4.5.3.7 Impedance Behavior of Supercapacitors Based on Pseudocapacitance. 4.5.3.8 Deviations of Double-layer Capacitance from Ideal Behavior: Representation by a Constant-phase Element (CPE). 4.5.4 Fuel Cells (Norbert Wagner). 4.5.4.1 Introduction. 4.5.4.2 Alkaline Fuel Cells (AFC). 4.5.4.3 Polymer Electrolyte Fuel Cells (PEFC). 4.5.4.4 Solid Oxide Fuel Cells (SOFC). Appendix. Abbreviations and Definitions of Models. References. Index.
5,212 citations
•
02 Mar 2000
TL;DR: An introduction to fractional calculus can be found in this paper, where Butzer et al. present a discussion of fractional fractional derivatives, derivatives and fractal time series.
Abstract: An introduction to fractional calculus, P.L. Butzer & U. Westphal fractional time evolution, R. Hilfer fractional powers of infinitesimal generators of semigroups, U. Westphal fractional differences, derivatives and fractal time series, B.J. West and P. Grigolini fractional kinetics of Hamiltonian chaotic systems, G.M. Zaslavsky polymer science applications of path integration, integral equations, and fractional calculus, J.F. Douglas applications to problems in polymer physics and rheology, H. Schiessel et al applications of fractional calculus and regular variation in thermodynamics, R. Hilfer.
5,201 citations
••
TL;DR: In this article, the square root of the Laplacian (−△) 1/2 operator was obtained from the harmonic extension problem to the upper half space as the operator that maps the Dirichlet boundary condition to the Neumann condition.
Abstract: The operator square root of the Laplacian (−△) 1/2 can be obtained from the harmonic extension problem to the upper half space as the operator that maps the Dirichlet boundary condition to the Neumann condition. In this paper we obtain similar characterizations for general fractional powers of the Laplacian and other integro-differential operators. From those characterizations we derive some properties of these integro-differential equations from purely local arguments in the extension problems.
2,696 citations