A pistonless Stirling engine—The traveling wave heat engine
01 Nov 1979-Journal of the Acoustical Society of America (Acoustical Society of America)-Vol. 66, Iss: 5, pp 1508-1513
TL;DR: In this paper, the ideal gain and maximum energy conversion rates were derived for differentially heated regenerators and the low power gain measurements were made to verify the derived gain equation and practical engines and heat pumps using this principle.
Abstract: The propagation of acoustical waves through a differentially heated regenerator results in gas in the regenerator undergoing a Stirling thermodynamic cycle. One direction of wave propagation results in amplification of the waves and conversion of thermal energy into acoustical energy. The opposite direction results in acoustical energy being used to pump heat. The ideal gain and maximum energy conversion rates are derived in this paper. Low power gain measurements were made which verify the derived gain equation. Practical engines and heat pumps using this principle are discussed.
Citations
More filters
Proceedings Article•
01 Jan 1991TL;DR: In this paper, an approximate analysis of energy flow and acoustical measurements of a thermoacoustic prime mover with arbitrary cross-sectional geometry is given. But this analysis is restricted to the case of TAEs with circular or parallel slit pore geometry.
Abstract: Thermoacoustic engines (TAEs) can be used to pump heat using a sound wave or pump a sound wave using a temperature gradient. The basic arrangement is a gas-filled acoustic resonator with appropriately positioned thermoacoustic elements. Two types of thermoacoustic elements are used in these engines: (1) heat exchangers used to communicate heat between the gas and external heat reservoirs; and (2) the TAE, also known as a stack. The TAEs are sections of porous media that support the temperature gradient, transport heat on the acoustic wave between the exchangers, and produce or absorb acoustic power. Previous results have been developed for TAEs with circular or parallel slit pore geometries. The theory is extended for gas-filled TAEs to include pores of arbitrary cross-sectional geometry. An approximate analysis of energy flow and acoustical measurements of a thermoacoustic prime mover are given. >
821 citations
TL;DR: In this paper, an inexpensive thermo-acoustic engine that employs the inherently efficient Stirling cycle is presented, which achieves an efficiency of 0.30, which is comparable to that of the common internal combustion engine and piston-driven Stirling engines.
Abstract: Electrical and mechanical power, together with other forms of useful work, are generated worldwide at a rate of about 1012 watts, mostly using heat engines. The efficiency of such engines is limited by the laws of thermodynamics and by practical considerations such as the cost of building and operating them. Engines with high efficiency help to conserve fossil fuels and other natural resources, reducing global-warming emissions and pollutants. In practice, the highest efficiencies are obtained only in the most expensive, sophisticated engines, such as the turbines in central utility electrical plants. Here we demonstrate an inexpensive thermoacoustic engine that employs the inherently efficient Stirling cycle1. The design is based on a simple acoustic apparatus with no moving parts. Our first small laboratory prototype, constructed using inexpensive hardware (steel pipes), achieves an efficiency of 0.30, which exceeds the values of 0.10–0.25 attained in other heat engines5,6 with no moving parts. Moreover, the efficiency of our prototype is comparable to that of the common internal combustion engine2 (0.25–0.40) and piston-driven Stirling engines3,4 (0.20–0.38).
534 citations
TL;DR: A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described and data are presented which show the nearly complete elimination of the streaming convective heat loads.
Abstract: A new type of thermoacoustic engine based on traveling waves and ideally reversible heat transfer is described. Measurements and analysis of its performance are presented. This new engine outperforms previous thermoacoustic engines, which are based on standing waves and intrinsically irreversible heat transfer, by more than 50%. At its most efficient operating point, it delivers 710 W of acoustic power to its resonator with a thermal efficiency of 0.30, corresponding to 41% of the Carnot efficiency. At its most powerful operating point, it delivers 890 W to its resonator with a thermal efficiency of 0.22. The efficiency of this engine can be degraded by two types of acoustic streaming. These are suppressed by appropriate tapering of crucial surfaces in the engine and by using additional nonlinearity to induce an opposing time-averaged pressure difference. Data are presented which show the nearly complete elimination of the streaming convective heat loads. Analysis of these and other irreversibilities show which components of the engine require further research to achieve higher efficiency. Additionally, these data show that the dynamics and acoustic power flows are well understood, but the details of the streaming suppression and associated heat convection are only qualitatively understood.
494 citations
01 Jan 1999
TL;DR: A review of the pulse tube refrigerator from its inception in the mid-1960s up to the present can be found in this paper, where various factors brought it from a laboratory curiosity to the point where it is now the most efficient of all cryocoolers and reliable enough to be used on space missions.
Abstract: This paper presents a review of the pulse tube refrigerator from its inception in the mid-1960s up to the present. Various factors are discussed which brought it from a laboratory curiosity to the point where it is now the most efficient of all cryocoolers and reliable enough to be used on space missions. Carnot efficiencies as high as about 20% at 80 K and temperatures as low as 2 K have been achieved in pulse tube refrigerators. The operating principles for the different types of pulse tube and thermoacoustic refrigerators are described. Pulse tube refrigerators operate with oscillating pressures and mass flows and have no moving parts in the cold end. For large industrial systems the mechanical compressor can be replaced with one of two types of thermoacoustic drivers to yield a refrigerator with no moving parts. Recent advances in understanding and reducing losses in various components are described that have led to the improved efficiencies. The major problems associated with cryocoolers are listed, and it is shown that pulse tube refrigerators have begun to overcome many of these problems. As a result, they are now being used or considered for many different applications. Some of these applications as well as example pulse tube refrigerators are described.
196 citations
Cites background from "A pistonless Stirling engine—The tr..."
...Traveling Wave In 1979 Ceperley [36] proposed another form of thermoacoustic heat engine with no moving parts, known as a traveling-wave Stirling engine....
[...]
...In 1979 Ceperley [36] proposed another form of thermoacoustic heat engine with no moving parts, known as a traveling-wave Stirling engine....
[...]
TL;DR: The combination of all these oscillations, and their interaction with solid boundaries, produces a rich variety of “thermoacoustic” effects, such as temperature oscillations always accompany the pressure changes as mentioned in this paper.
Abstract: We ordinarily think of a sound wave in a gas as consisting of coupled pressure and displacement oscillations. However, temperature oscillations always accompany the pressure changes. The combination of all these oscillations, and their interaction with solid boundaries, produces a rich variety of “thermoacoustic” effects. Although these effects as they occur in everyday life are too small to be noticed, one can harness extremely loud sound waves in acoustically sealed chambers to produce powerful heat engines, heat pumps and refrigerators. Whereas typical engines and refrigerators have crankshaft‐coupled pistons or rotating turbines, thermoacoustic engines and refrigerators have at most a single flexing moving part (as in a loudspeaker) with no sliding seals. Thermoacoustic devices may be of practical use where simplicity, reliability or low cost is more important than the highest efficiency (although one cannot say much more about their cost‐competitiveness at this early stage).
186 citations