A review of boiling and convective heat transfer with nanofluids
TL;DR: In this paper, a review of research and development made in these areas of nanofluids is presented together with exhaustive review of these important cooling features, including boiling, spreading, and convective heat transfers.
Abstract: Nanofluids have evoked immense interest from researchers of multi-disciplines from around the globe due to their fascinating thermophysical properties and numerous potential benefits and applications in important fields such as microelectronics, microfluidics, transportation, and biomedical. However, there are many controversies and inconsistencies in reported arguments and experimental results on various thermal characteristics such as effective thermal conductivity, convective heat transfer coefficient and boiling heat transfer rate of nanofluids. As of today, researchers have mostly focused on anomalous thermal conductivity of nanofluids. Although investigations on boiling, droplet spreading, and convective heat transfer are very important in order to exploit nanofluids as the next generation coolants, considerably less efforts have been made on these major features of nanofluids. In this paper, these important cooling features—boiling, spreading, and convective heat transfers of nanofluids are presented together with exhaustive review of research and development made in these areas of nanofluids.
Citations
More filters
Journal Article•
TL;DR: The International Nanofluid Property Benchmark Exercise (INPBE) as discussed by the authors was held in 1998, where the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or "nanofluids" was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady state methods, and optical methods.
Abstract: This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or “nanofluids,” was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (±10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.
881 citations
TL;DR: In this paper, a review summarizes recent researches on synthesis, thermophysical properties, heat transfer and pressure drop characteristics, possible applications and challenges of hybrid nanofluids, and showed that proper hybridization may make the hybrid nanoparticles very promising for heat transfer enhancement, however, lot of research works are still needed in the fields of preparation and stability, characterization and applications to overcome the challenges.
Abstract: Researches on the nanofluids have been increased very rapidly over the past decade. In spite of some inconsistency in the reported results and insufficient understanding of the mechanism of the heat transfer in nanofluids, it has been emerged as a promising heat transfer fluid. In the continuation of nanofluids research, the researchers have also tried to use hybrid nanofluid recently, which is engineered by suspending dissimilar nanoparticles either in mixture or composite form. The idea of using hybrid nanofluids is to further improvement of heat transfer and pressure drop characteristics by trade-off between advantages and disadvantages of individual suspension, attributed to good aspect ratio, better thermal network and synergistic effect of nanomaterials. This review summarizes recent researches on synthesis, thermophysical properties, heat transfer and pressure drop characteristics, possible applications and challenges of hybrid nanofluids. Review showed that proper hybridization may make the hybrid nanofluids very promising for heat transfer enhancement, however, lot of research works is still needed in the fields of preparation and stability, characterization and applications to overcome the challenges.
846 citations
Additional excerpts
...[2–3,12–64])....
[...]
TL;DR: Nanofluids have seen enormous growth in popularity since they were proposed by Choi in 1995 as mentioned in this paper, and there were nearly 700 research articles where the term nanofluid was used in the title, showing rapid growth from 2006 (175) and 2001 (10).
Abstract: Nanofluids—a simple product of the emerging world of nanotechnology—are suspensions of nanoparticles (nominally 1–100 nm in size) in conventional base fluids such as water, oils, or glycols. Nanofluids have seen enormous growth in popularity since they were proposed by Choi in 1995. In the year 2011 alone, there were nearly 700 research articles where the term nanofluid was used in the title, showing rapid growth from 2006 (175) and 2001 (10). The first decade of nanofluid research was primarily focused on measuring and modeling fundamental thermophysical properties of nanofluids (thermal conductivity, density, viscosity, heat transfer coefficient). Recent research, however, explores the performance of nanofluids in a wide variety of other applications. Analyzing the available body of research to date, this article presents recent trends and future possibilities for nanofluids research and suggests which applications will see the most significant improvement from employing nanofluids.
679 citations
Cites background from "A review of boiling and convective ..."
...[30], [53], [58], [59], [78], [122], [151–154]), so here we present only a brief description of...
[...]
...significantly increased conductive [3–24][38-58] and convective [59-68] heat transfer properties....
[...]
TL;DR: In this paper, a critical review of traditional and emerging cooling methods as well as coolants for electronics is provided, summarizing traditional coolants, heat transfer properties and performances of potential new coolants such as nanofluids are also reviewed and analyzed.
Abstract: Continued miniaturization and demand for high-end performance of electronic devices and appliances have led to dramatic increase in their heat flux generation. Consequently, conventional coolants and cooling approaches are increasingly falling short in meeting the ever-increasing cooling needs and challenges of those high heat generating electronic devices. This study provides a critical review of traditional and emerging cooling methods as well as coolants for electronics. In addition to summarizing traditional coolants, heat transfer properties and performances of potential new coolants such as nanofluids are also reviewed and analyzed. With superior thermal properties and numerous benefits nanofluids show great promises in fulfilling the cooling demands of high heat generating electronic devices. It is believed that applications of such novel coolants in emerging techniques like micro-channels and micro-heat pipes can revolutionize cooling technologies for electronics in the future.
441 citations
TL;DR: In this paper, the authors summarized the important published articles on the enhancement of the convection heat transfer in heat exchangers using nanofluids on two topics: theoretical and experimental results for the effective thermal conductivity, viscosity and the Nusselt number reported by several authors.
Abstract: The purpose of this review summarizes the important published articles on the enhancement of the convection heat transfer in heat exchangers using nanofluids on two topics. The first section focuses on presenting the theoretical and experimental results for the effective thermal conductivity, viscosity and the Nusselt number reported by several authors. The second section concentrates on application of nanofluids in various types of heat exchangers: plate heat exchangers, shell and tube heat exchangers, compact heat exchangers and double pipe heat exchangers.
421 citations
References
More filters
Book•
01 Jan 1973TL;DR: CRC handbook of chemistry and physics, CRC Handbook of Chemistry and Physics, CRC handbook as discussed by the authors, CRC Handbook for Chemistry and Physiology, CRC Handbook for Physics,
Abstract: CRC handbook of chemistry and physics , CRC handbook of chemistry and physics , کتابخانه مرکزی دانشگاه علوم پزشکی تهران
52,268 citations
TL;DR: In this article, the authors considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid and concluded that only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids.
Abstract: Nanofluids are engineered colloids made of a base fluid and nanoparticles (1-100 nm) Nanofluids have higher thermal conductivity' and single-phase heat transfer coefficients than their base fluids In particular the heat transfer coefficient increases appear to go beyond the mere thermal-conductivity effect, and cannot be predicted by traditional pure-fluid correlations such as Dittus-Boelter's In the nanofluid literature this behavior is generally attributed to thermal dispersion and intensified turbulence, brought about by nanoparticle motion To test the validity of this assumption, we have considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid These are inertia, Brownian diffusion, thermophoresis, diffusioplwresis, Magnus effect, fluid drainage, and gravity We concluded that, of these seven, only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids Based on this finding, we developed a two-component four-equation nonhomogeneous equilibrium model for mass, momentum, and heat transport in nanofluids A nondimensional analysis of the equations suggests that energy transfer by nanoparticle dispersion is negligible, and thus cannot explain the abnormal heat transfer coefficient increases Furthermore, a comparison of the nanoparticle and turbulent eddy time and length scales clearly indicates that the nanoparticles move homogeneously with the fluid in the presence of turbulent eddies so an effect on turbulence intensity is also doubtful Thus, we propose an alternative explanation for the abnormal heat transfer coefficient increases: the nanofluid properties may vary significantly within the boundary layer because of the effect of the temperature gradient and thermophoresis For a heated fluid, these effects can result in a significant decrease of viscosity within the boundary layer, thus leading to heat transfer enhancement A correlation structure that captures these effects is proposed
5,329 citations
TL;DR: In this article, an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat-transfer fluids, which are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluid, and they represent the best hope for enhancing heat transfer.
Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.
4,634 citations
Book•
01 Jan 1984
TL;DR: In this paper, the authors describe a transition from Laminar boundary layer flow to Turbulent Boundary Layer flow with change of phase Mass Transfer Convection in Porous Media.
Abstract: Fundamental Principles Laminar Boundary Layer Flow Laminar Duct Flow External Natural Convection Internal Natural Convection Transition to Turbulence Turbulent Boundary Layer Flow Turbulent Duct Flow Free Turbulent Flows Convection with Change of Phase Mass Transfer Convection in Porous Media.
4,067 citations